of Orthodontic Treatment Philosophy - Almagro · PDF fileMost orthodontic professionals will agree that “successful bonding” is the single most important factor in keeping a practice

© 2002-2005 3M Company. All rights reserved. REF 016-909-4 0505

In U.S. and Puerto Rico: 1-800-423-4588 • 626-574-4000In Canada: 1-800-443-1661Technical Helpline: 1-800-265-1943 • 626-574-4577CE Hotline: 1-800-852-1990 x 4649 • 626-574-4649Outside these areas, contact your local representative.

Printed on 50% recycledwaste paper, including 10%post-consumer waste paper.

The MBT™ Philosophy of Orthodontic TreatmentProduct Catalog

33M UnitekOrthodontic Products

2724 South Peck RoadMonrovia, CA 91016 USA

www.3MUnitek.com

MBT™ Versatile+ Appliance SystemCatalog table of contents

Appliance Systems....................................................................................4

Arch Form and Archwire Sequencing.................33

Supporting Products.....................................................................41

Continuing Education, Ordering Information..............................................................47

3Unitek USA and PR 800.423.4588Canada 800.443.1661

MBT™ Versatile+APPLIANCE SYSTEM

USA and PR 800.423.4588Canada 800.443.1661

1

In more than 20 years of experience with the preadjusted appliance, Drs. McLaughlin, Bennett and Trevisi have all noted

its very positive aspects, but have also seen a need for refinements in certain areas. These improvements are at the core of the

MBT™ Prescription and have been incorporated into four current bracket designs from 3M Unitek (Clarity™ Brackets, Victory

Series™ Brackets, Victory Series™ Low Profile Brackets and Unitek™ Full Size Brackets. Additionally, for orthodontists who

prefer a self-ligating option, SmartClip™ Self-Ligating Brackets are offered in the MBT Prescription). These options give

patients greater flexibility while enabling the orthodontist to provide maximum control and treatment efficiency.

The MBT™ Versatile+ System

appliance provides several features

that significantly improve clinical

management of orthodontic cases.

These features are as follows:

Anterior Tip

Reduced anterior tip was incorporated

into the appliance to conform to

Andrew’s original research, and to

dramatically reduce the anchorage

needs of each case.

Upper Posterior Tip

Upper bicuspid brackets are provided

with 0° of tip to keep these teeth in a

more upright (Class I) position. Upper

molar brackets are provided with 0° of

tip, which when placed parallel to the

occlusal plane, introduce 5° of tip into

the upper molars.

Lower Posterior Tip

Lower posterior tip in the first and

second bicuspid brackets is

maintained at 2°, to slightly incline

these teeth forward (in a Class I

direction). For the lower first and

second molars, 0° tipped brackets are

provided, which when placed parallel

to the occlusal plane, introduces 2° of

tip to these teeth.

Incisor Torque

Upper incisor brackets are provided

with additional palatal root torque,

while lower incisor brackets are

provided with additional labial root

torque. This adjustment aids in the

correction of the most common

torque problems occurring in the

incisor areas.

Upper Cuspid, Bicuspid and

Molar Torque

Upper cuspid and bicuspid brackets

are provided with the normal -7° of

torque. Upper molar brackets are

provided with an additional -5° of

buccal root torque (total -14°) to

reduce palatal cusp interferences with

these teeth.

Lower Cuspid, Bicuspid and

Molar Torque

Reduced progressive buccal crown

torque is provided in the brackets of

the lower cuspids and lower posterior

segments. This allows for buccal

uprighting of these teeth, which is

beneficial in most cases.

In/Out Modifications

Because upper second bicuspids are

sometimes smaller than upper first

bicuspids, brackets with an additional

.5 mm of in/out compensation are

provided for these. If upper bicuspids

are the same size, upper first bicuspid

brackets can be used on all upper

bicuspids.

A review of the literature on arch

form reveals that three basic arch

forms have been described by

many clinicians — Tapered, Ovoid

and Square.

When superimposed, they vary

primarily in inter-cuspid width, with

a range of approximately 5 mm. Inter-

molar widths are quite similar and the

posterior aspects of the archwires can

be widened or narrowed as needed.

OrthoForm™ I Tapered

Provides the most narrow inter-cuspid

width and is indicated for patients

with narrow, tapered arch forms. It is

particularly important to use this arch

form in patients with narrow arch

forms and gingival recession in the

cuspid and bicuspid regions, a

situation that occurs most frequently

in adult orthodontic cases.

OrthoForm™ II Square

Indicated for patients with broad arch

forms or in the first portion of

treatment in cases that require buccal

uprighting of the lower posterior

segments and expansion of the

upper arch.

OrthoForm™ III Ovoid

Has been used most frequently by the

authors over the past fifteen years. By

using this arch form, along with

settling and retention procedures, post

treatment relapse has been minimized

in the majority of treated cases.

ARCH FORM AND ARCHWIRE SEQUENCING MBT™ System

3Unitek2

BRACKET PLACEMENT TECHNIQUE MBT™ System

USA and PR 800.423.4588Canada 800.443.1661

3

It has been recommended that

preadjusted appliance brackets be

placed with the twin bracket wings

straddling, in a parallel fashion,

the vertical long axis of the clinical

crown, and that the center of the

bracket slot be placed on the center

of the clinical crown.

As with any preadjusted bracket

system, bracket positioning is the key

to successful treatment. With this

objective in mind, MBT System

treatment incorporates a unique

bracket positioning system that

provides individualized measurements

for bracket placement and also allows

for variations based upon differences

in tooth size.

This system uses redesigned bracket

positioning gauges with a unique color-

coded ID system that provides the

clinician easy-to-read measurements.

The bracket placement guide is a

superb adjunct to the placement of

preadjusted brackets using the direct

visualization technique.

3Unitek

appliance systems

4

APC™ Adhesive Coated appliance system...................5

CLARITY™ METAL-REINfORCED CERAMIC BRACKETS....................................................................................6

Victory series™ miniature brackets............................10

victory Series™ Low profile brackets.......................13

Victory series™ bracket Kits..................................................16

unitek™ full size twin bracket System....................17

smartclip™ Self-Ligating Appliance System..........19

victory series™ buccal tubes................................................23

victory series™ 2nd bicuspid tubes...................................26

Victory series™ narrow contoured first molar bands...............................................................................27

victory series™ narrow contoured second molar bands......................................................................29

unitek™ proportioned bicuspid bandsmaxillary..........................................................................................................31

unitek™ proportioned bicuspid bandsmandibular..................................................................................................32

The APC™ Adhesive Coated Appliance System from 3M Unitek is the fastest, most convenient and efficient method you

can use for appliance application and bonding. Initially offered in single patient kits, today’s APC system is available with a

comprehensive Inventory Dispensing System (IDS) that has been designed to fit into your operatory delivery protocol.

Most orthodontic professionals will agree that “successful bonding” is the single most important factor in keeping a

practice and its schedule stress-free. The APC system not only reduces variables that contribute to bond failure, but goes

above and beyond by simplifying the set-up procedure as well as providing an inventory framework that is easy to control

and manage.

The APC Inventory Dispensing System is built to your specifications. 3M Unitek understands that each orthodontic

office is unique and has special needs.

• Do you bond to molars?

• Do you offer aesthetic appliances to your patients?

• Do you utilize more than one appliance prescription in your practice?

• Does your treatment coordinator look for ways to set your practice apart?

The APC Adhesive Coated Appliance System. Designed to be Your System.

APC™ Adhesive Coated appliance system

USA and PR 800.423.4588Canada 800.443.1661

5

CLARITY™ METAL-REINfORCED CERAMIC BRACKETS

3Unitek6

Mechanical lock base provides reliablebond strength with all chemical andlight cure bonding systems

Unique micro-crystalline bonding surfaceprovides the consistency, strength and

reliability of mechanical retention

Mechanicalretention provides

reliable bondstrength throughouttreatment as well asreliable debonding

Base flange for easierplacement andadhesive flash clean-up

Metal-lined slotprovides

true metal on metalsliding efficiency,

strengthens the bracketand assists in accurate

bracket positioning

Rounded corners anddome-shaped profileenhance patient comfort

Stress concentrator allows formetal-like debonding

A permanent recessed ID dot with brightly colored inkassures accurate selection andidentification

Bi-directional hook is angled for patient comfort

Tie-wings designed for easy ligation — just like metal brackets

Twin design puts betterrotational control rightat hand

Torque in-base designmaintains level slot line-up

Also available with your choice of APC™ IIAdhesive or with the APC™ PLUS Systemwith color changing adhesive for reliable andefficient bonding.

Available in APC™ II AdhesiveCoated Appliance System

Available in APC™ PLUS AdhesiveCoated Appliance System


MBT™ System Prescription

USA and PR 800.423.4588Canada 800.443.1661

7

Selection by MBT™ Prescription .018 in.

APC™ II.018 in.

APC™ PLUS.018 in.

Non-coated.018 in.

6700Use this prefix

to order APC™ IIAdhesive Coated

Appliance System.

6800Use this prefix to

order APC™ PLUSAdhesive CoatedAppliance Systemwith color change

adhesive.

Cuspid

Bicuspid

Torque Ang. Hook L/R

Central

Lateral

Cuspid

Anterior

FirstBicuspid

Maxillary

SecondBicuspid

+17° 4° 3.5 UL 6700-801 6800-801 6400-801+17° 4° 3.5 UR 6700-802 6800-802 6400-802

+10° 8° 3.0 UL 6700-803 6800-803 6400-803+10° 8° 3.0 UR 6700-804 6800-804 6400-804

-7° 8° 3.5 D UL 6700-683 6800-683 6400-683-7° 8° 3.5 D UR 6700-682 6800-682 6400-682-7° 8° 3.5 UL 6700-805 6800-805 6400-805-7° 8° 3.5 UR 6700-806 6800-806 6400-8060° 8° 3.5 D UL 6700-807 6800-807 6400-8070° 8° 3.5 D UR 6700-808 6800-808 6400-8080° 8° 3.5 UL 6700-817 6800-817 6400-8170° 8° 3.5 UR 6700-818 6800-818 6400-818

-7° 0° 3.0 UL/UR 6700-611 6800-611 6400-611-7° 0° 3.5 D UL 6700-609 6800-609 6400-609-7° 0° 3.5 D UR 6700-610 6800-610 6400-610

-6° 0° 2.5 LL/LR 6700-810 6800-810 6400-810

-6° 3° 3.5 LL 6700-695 6800-695 6400-695-6° 3° 3.5 LR 6700-696 6800-696 6400-696-6° 3° 3.5 D LL 6700-685 6800-685 6400-685-6° 3° 3.5 D LR 6700-684 6800-684 6400-6840° 3° 3.5 LL 6700-697 6800-697 6400-6970° 3° 3.5 LR 6700-698 6800-698 6400-6980° 3° 3.5 D LL 6700-699 6800-699 6400-6990° 3° 3.5 D LR 6700-700 6800-700 6400-700

-12° 2° 3.0 LL 6700-687 6800-687 6400-687-12° 2° 3.0 LR 6700-686 6800-686 6400-686-12° 2° 3.5 D LL 6700-689 6800-689 6400-689-12° 2° 3.5 D LR 6700-688 6800-688 6400-688-17° 2° 3.0 LL 6700-691 6800-691 6400-691-17° 2° 3.0 LR 6700-690 6800-690 6400-690-17° 2° 3.5 D LL 6700-693 6800-693 6400-693-17° 2° 3.5 D LR 6700-692 6800-692 6400-692

M/DWidth

Mandibular

Note

APC™ II Clarity™ Brackets sold in units of five. APC™ PLUS Clarity™ Brackets sold in units of five.

Measurements are in millimeters unless otherwise noted.

For Clarity™ MBT™ Rx One Case Kits see page 9.

For detailed buccal tube informationsee the Buccal Tubes section.

CLARITY™ METAL-REINfORCED CERAMIC BRACKETS MBT™ System Prescription

3Unitek8

Selection by MBT™ Prescription .022 in.

APC™ II.022 in.

APC™ PLUS.022 in.

Non-coated.022 in.

6700Use this prefix


Appliance System.



adhesive.

Cuspid

Bicuspid


Central

Lateral

Cuspid

Anterior

FirstBicuspid

Maxillary

SecondBicuspid

+17° 4° 3.5 UL 6700-901 6800-901 6400-901+17° 4° 3.5 UR 6700-902 6800-902 6400-902

+10° 8° 3.0 UL 6700-903 6800-903 6400-903+10° 8° 3.0 UR 6700-904 6800-904 6400-904

-7° 8° 3.5 D UL 6700-783 6800-783 6400-783-7° 8° 3.5 D UR 6700-782 6800-782 6400-782-7° 8° 3.5 UL 6700-905 6800-905 6400-905-7° 8° 3.5 UR 6700-906 6800-906 6400-9060° 8° 3.5 D UL 6700-907 6800-907 6400-9070° 8° 3.5 D UR 6700-908 6800-908 6400-9080° 8° 3.5 UL 6700-917 6800-917 6400-9170° 8° 3.5 UR 6700-918 6800-918 6400-918

-7° 0° 3.0 UL/UR 6700-711 6800-711 6400-711-7° 0° 3.5 D UL 6700-709 6800-709 6400-709-7° 0° 3.5 D UR 6700-710 6800-710 6400-710

-6° 0° 2.5 LL/LR 6700-910 6800-910 6400-910

-6° 3° 3.5 LL 6700-795 6800-795 6400-795-6° 3° 3.5 LR 6700-796 6800-796 6400-796-6° 3° 3.5 D LL 6700-785 6800-785 6400-785-6° 3° 3.5 D LR 6700-784 6800-784 6400-7840° 3° 3.5 LL 6700-797 6800-797 6400-7970° 3° 3.5 LR 6700-798 6800-798 6400-7980° 3° 3.5 D LL 6700-799 6800-799 6400-7990° 3° 3.5 D LR 6700-800 6800-800 6400-800

-12° 2° 3.0 LL 6700-787 6800-787 6400-787-12° 2° 3.0 LR 6700-786 6800-786 6400-786-12° 2° 3.5 D LL 6700-789 6800-789 6400-789-12° 2° 3.5 D LR 6700-788 6800-788 6400-788-17° 2° 3.0 LL 6700-791 6800-791 6400-791-17° 2° 3.0 LR 6700-790 6800-790 6400-790-17° 2° 3.5 D LL 6700-793 6800-793 6400-793-17° 2° 3.5 D LR 6700-792 6800-792 6400-792

M/DWidth

Mandibular

Note



For Clarity™ MBT™ Rx One Case Kits see page 9.

For detailed buccal tube informationsee the Buccal Tubes section.


MBT™ System Prescription KITS

USA and PR 800.423.4588Canada 800.443.1661

9

One Case Kits .018 in.

APC™ II.018 in.

APC™ PLUS.018 in.

Non-coated.018 in.Type Hook

Clarity MBT™ One Case Kits

Upper 3x3 6700-208 6800-208 6400-208Upper 3x3 Cuspid 6700-212 6800-212 6400-212Upper 5x5 6700-210 6800-210 6400-210Upper 5x5 Cuspid 6700-214 6800-214 6400-214

U/L 3x3 6700-209 6800-209 6400-209U/L 3x3 Cuspid 6700-213 6800-213 6400-213U/L 5x5 6700-211 6800-211 6400-211U/L 5x5 Cuspid 6700-215 6800-215 6400-215

6700Use this prefix


Appliance System.



adhesive.

One Case Kits .022 in.

APC™ II.022 in.

APC™ PLUS.022 in.

Non-coated.022 in.Type Hook

Clarity MBT™ One Case Kits

Upper 3x3 6700-200 6800-200 6400-200Upper 3x3 Cuspid 6700-204 6800-204 6400-204Upper 5x5 6700-202 6800-202 6400-202Upper 5x5 Cuspid 6700-206 6800-206 6400-206

U/L 3x3 6700-201 6800-201 6400-201U/L 3x3 Cuspid 6700-205 6800-205 6400-205U/L 5x5 6700-203 6800-203 6400-203U/L 5x5 Cuspid 6700-207 6800-207 6400-207

6700Use this prefix


Appliance System.



adhesive.

Note




3Unitek10

Victory Series™ Miniature Metal Bracket System

The acknowledges industry standard for brackets, the

Victory Series miniature metal bracket system features high

bond strength, easily readable identification system and easier

bracket ligation. For ease of use, the brackets have been

designed with smoothly finished bicuspid tie-wings that

are slightly extended and offset gingivally away from the

tooth. Deep tie-wing undercuts assure easier and more

secure ligation.

An innovative pad design, incorporating an 80 gauge

mesh bonding pad, matches the curvature of the tooth for

maximum contact and strong, consistent bond strength. Research

conducted and published by Howard University* reveals shear bond

strengths 40% to 50% higher for 80 gauge mesh vs. 100 gauge mesh on

bicuspids with macro-filled resins.

Also available are gingivally offset bicuspid brackets. This unique pad design features a larger bonding base and

radiused corners for enhanced base-to-tooth adaptation, providing improved bond strength.

The Victory Series bracket system also makes use of torque-in-base design techniques to provide level slot line-up,

and help avoid occlusal interference. A long axis scribe line is provided for accurate placement.

Victory Series miniature metal brackets from 3M Unitek. Providing products that make your life easier.

The low profile hookand small ball are milled

from a single piece of metalfor increased patient comfort.

3M Unitek has developed an innovative color coding systemthat assigns a different color to each quadrant of the mouth

for immediate identification. Within seconds, you can tell if abracket is in the right place.

*S. Scott, E.M. Kudlick, and F.C. Eichmiller, thesis abstract 1992, Howard University College of Dentistry, Washington D.C.

Victory series™ miniature brackets

Victory series™ miniature bracketsMBT™ System Prescription

USA and PR 800.423.4588Canada 800.443.1661

11

UniversalBicuspids

Cuspid

Lateral

Torque Ang. Hook .018 in.L/R .022 in.

Central

Maxillary

*SecondBicuspidTHK

APC™ II Adhesive Coated Appliance System

Off

set

Off

set

+17° 4° 1.0 3.5 UL 3 017-775 3 017-875

+17° 4° 1.0 3.5 UR 3 017-776 3 017-876

+10° 8° 1.4 2.6 UL 3 017-777 3 017-877

+10° 8° 1.4 2.6 UR 3 017-778 3 017-878

-7° 8° .76 3.2 UL 3 017-779 3 017-879

-7° 8° .76 3.2 UR 3 017-780 3 017-880

-7° 8° .76 3.2 D UL 3 017-881 3 017-981

-7° 8° .76 3.2 D UR 3 017-882 3 017-982

0° 8° .76 3.2 D UL 3 017-773 3 017-873

0° 8° .76 3.2 D UR 3 017-774 3 017-874

-7° 0° .91 3.0 UNIV 3 017-790 0 3 017-890 0

-7° 0° .91 3.0 D UL 3 017-585 0 3 017-685 0

-7° 0° .91 3.0 D UR 3 017-584 0 3 017-684 0

-7° 0° 1.4 3.0 UNIV 3 017-791 0 3 017-891 0

-7° 0° 1.4 3.0 D UL 3 017-813 0 3 017-913 0

-7° 0° 1.4 3.0 D UR 3 017-812 0 3 017-912 0

3

In/OutM/D

Width

Appliance is available in APC™ II AdhesiveCoated Appliance System.

Note

APC™ II Brackets sold in units of five.


* Optional – Compensated in/out for tooth size discrepancy

Victory series™ miniature bracketsMBT™ System Prescription

3Unitek12

Torque .018 in.

FirstBicuspid

.022 in.

SecondBicuspid

Mandibular


Off

set

Off

set

Anterior

Cuspid

Ang. Hook L/RIn/OutM/D

Width

-6° 0° 1.5 2.4 UNIV 3 017-792 3 017-892

-6° 3° .76 3.2 LL 3 017-793 3 017-893

-6° 3° .76 3.2 LR 3 017-794 3 017-894

-6° 3° .76 3.2 D LL 3 017-883 3 017-983

-6° 3° .76 3.2 D LR 3 017-884 3 017-984

0° 3° .76 3.2 D LL 3 017-771 3 017-871

0° 3° .76 3.2 D LR 3 017-772 3 017-872

-12° 2° .89 3.0 LL 3 017-795 0 3 017-895 0

-12° 2° .89 3.0 LR 3 017-796 0 3 017-896 0

-12° 2° .89 3.0 D LL 3 017-809 0 3 017-909 0

-12° 2° .89 3.0 D LR 3 017-808 0 3 017-908 0

-17° 2° .89 3.0 LL 3 017-797 0 3 017-897 0

-17° 2° .89 3.0 LR 3 017-798 0 3 017-898 0

-17° 2° .89 3.0 D LL 3 017-811 0 3 017-911 0

-17° 2° .89 3.0 D LR 3 017-810 0 3 017-910 0

3 Appliance is available in APC™ II AdhesiveCoated Appliance System.

Note



victory Series™ Low profile brackets

USA and PR 800.423.4588Canada 800.443.1661

13

Smooth radius surface forenhanced patient comfort

Torque in Basefor level slot line-up

Color-coded quadrantID system

Micro-etch base surface andanatomical contouring

Vertical scribe line for moreaccurate bracket placement

Uncompromising under tie-wing area for ease of ligation

Victory Series™ Low Profile Brackets

If you’ve been searching for a true mini metal bracket that’s uncompromising in ligation and control, victory is now

within your grasp. Our leading-edge design delivers uncompromising levels of control throughout the treatment process.

The bracket’s remarkable low profile greatly reduces occlusal interference. The bracket also features a contoured micro-

etched base. Positioning is made easier and more accurate because of the bracket’s rhomboid shape that follows the tooth’s

natural long axis.

Ample under tie-wing area means that bracket size is not sacrificed for

easy ligation. In fact, the tie-wing under cuts are deep enough to accommodate

double ligation.

These low profile brackets inspire confidence as part of the time-tested Victory Series and MBT™ bracket solutions.

At the same time, they offer the proven time-savings of our APC™ Adhesive Coated Appliance System. Choose the

APC™ II System or the APC™ PLUS System with color change adhesive.

Traditional MiniatureBracket

Victory Series™ Low Profile Bracket

Micro-Etch



victory Series™ Low profile bracketsMBT™ System Prescription

3Unitek14

Off

set

Off

set

Off

set

Off

set

UniversalBicuspid

Cuspid

Lateral


CentralMaxillary

*SecondBicuspidTHK

In/Outmm

M/DWidth

* Optional – Compensated in/out fortooth size discrepancy

+17° 4° .66 3.35 L 3 024-775 3 024-875 5 024-775 5 024-875

+17° 4° .66 3.35 R 3 024-776 3 024-876 5 024-776 5 024-876

+10° 8° .89 2.69 L 3 024-777 3 024-877 5 024-777 5 024-877

+10° 8° .89 2.69 R 3 024-778 3 024-878 5 024-778 5 024-878

-7° 8° .53 3.00 L 3 024-779 3 024-879 5 024-779 5 024-879

-7° 8° .53 3.00 R 3 024-780 3 024-880 5 024-780 5 024-880

0° 8° .53 3.00 L 3 024-369 3 024-469 5 024-369 5 024-469

0° 8° .53 3.00 R 3 024-370 3 024-470 5 024-370 5 024-470

-7° 8° .53 3.00 D L 3 024-881 3 024-981 5 024-881 5 024-981

-7° 8° .53 3.00 D R 3 024-882 3 024-982 5 024-882 5 024-982

0° 8° .53 3.00 D L 3 024-773 3 024-873 5 024-773 5 024-873

0° 8° .53 3.00 D R 3 024-774 3 024-874 5 024-774 5 024-874

-7° 0° .73 2.97 UNIV 3 024-790 0 3 024-890 0 5 024-790 0 5 024-890 0

-7° 0° .73 2.97 D L 3 024-585 0 3 024-685 0 5 024-585 0 5 024-685 0

-7° 0° .73 2.97 D R 3 024-584 0 3 024-684 0 5 024-584 0 5 024-684 0

-7° 0° .73 2.97 UNIV 7024-790 7024-890 7024-790 7024-890

-7° 0° .73 2.97 D L 7024-585 7024-685 7024-585 7024-685

-7° 0° .73 2.97 D R 7024-584 7024-684 7024-584 7024-684

-7° 0° 1.3 2.97 UNIV 3 024-791 0 3 024-891 0 5 024-791 0 5 024-891 0

-7° 0° 1.3 2.97 D L 3 024-813 0 3 024-913 0 5 024-813 0 5 024-913 0

-7° 0° 1.3 2.97 D R 3 024-812 0 3 024-912 0 5 024-812 0 5 024-912 0

-7° 0° 1.3 2.97 UNIV 7024-791 7024-891 7024-791 7024-891

-7° 0° 1.3 2.97 D L 7024-813 7024-913 7024-813 7024-913

-7° 0° 1.3 2.97 D R 7024-812 7024-912 7024-812 7024-912

5Use this prefix to order APC™ PLUSAdhesive Coated Appliance System withcolor change adhesive.

3 Use this prefix to order APC™ IIAdhesive Coated Appliance System.

Note

APC™ II Brackets sold in units of five. APC™ PLUS Brackets sold in units of five.

Measurements are in millimetersunless otherwise noted.

If part number is preceded with “7” prefix,available welded to bicuspid bands.

.018 in. .022 in.APC™ PLUS Adhesive Coated Appliance System

.018 in. .022 in.APC™ II Adhesive Coated Appliance System

victory Series™ Low profile bracketsMBT™ System Prescription

USA and PR 800.423.4588Canada 800.443.1661

15

Off

set

Off

set

Off

set

Off

set



FirstBicuspid

Cuspid

Anterior

SecondBicuspid

-6° 0° 1.14 2.34 UNIV 3 024-792 3 024-892 5 024-792 5 024-892

-6° 3° .51 3.00 L 3 024-7931 3 024-8931 5 024-7931 5 024-8931

-6° 3° .51 3.00 R 3 024-7941 3 024-8941 5 024-7941 5 024-8941

0° 3° .51 3.00 L 3 024-3811 3 024-4811 5 024-3811 5 024-4811

0° 3° .51 3.00 R 3 024-3821 3 024-4821 5 024-3821 5 024-4821

-6° 3° .51 3.00 D L 3 024-8831 3 024-9831 5 024-8831 5 024-9831

-6° 3° .51 3.00 D R 3 024-8841 3 024-9841 5 024-8841 5 024-9841

0° 3° .51 3.00 D L 3 024-7711 3 024-8711 5 024-7711 5 024-8711

0° 3° .51 3.00 D R 3 024-7721 3 024-8721 5 024-7721 5 024-8721

-12° 2° .76 2.97 L 3 024-795 0 3 024-895 0 5 024-795 0 5 024-895 0

-12° 2° .76 2.97 R 3 024-796 0 3 024-896 0 5 024-796 0 5 024-896 0

-12° 2° .76 2.97 D L 3 024-809 0 3 024-909 0 5 024-809 0 5 024-909 0

-12° 2° .76 2.97 D R 3 024-808 0 3 024-908 0 5 024-808 0 5 024-908 0

-12° 2° .76 2.97 L 7024-795 7024-895 7024-795 7024-895

-12° 2° .76 2.97 R 7024-796 7024-896 7024-796 7024-896

-12° 2° .76 2.97 D L 7024-809 7024-909 7024-809 7024-909

-12° 2° .76 2.97 D R 7024-808 7024-908 7024-808 7024-908

-17° 2° .86 2.97 L 3 024-797 0 3 024-897 0 5 024-797 0 5 024-897 0

-17° 2° .86 2.97 R 3 024-798 0 3 024-898 0 5 024-798 0 5 024-898 0

-17° 2° .86 2.97 D L 3 024-811 0 3 024-911 0 5 024-811 0 5 024-911 0

-17° 2° .86 2.97 D R 3 024-810 0 3 024-910 0 5 024-810 0 5 024-910 0

-17° 2° .86 2.97 L 7024-797 7024-897 7024-797 7024-897

-17° 2° .86 2.97 R 7024-798 7024-898 7024-798 7024-898

-17° 2° .86 2.97 D L 7024-811 7024-911 7024-811 7024-911

-17° 2° .86 2.97 D R 7024-810 7024-910 7024-810 7024-910

Torque Ang. Hook .018 in.L/R .022 in.In/Out

mmM/D

Width

APC™ PLUS Adhesive Coated Appliance System


Mandibular

Note


Measurements are in millimetersunless otherwise noted.

If part number is preceded with “7” prefix,available welded to bicuspid bands.

Victory series™ bracket KitsMBT™ System Prescription

3Unitek16



Type Hook

Victory Series™ Low Profile Brackets One Case Kits

Note





U/L 5 x 5 3 024-100 3 024-120 5 024-100 5 024-120

U/L 5 x 5 Cuspid Hook 3 024-101 3 024-121 5 024-101 5 024-121

U/L 5 x 5 Hooks 3 024-102 3 024-122 5 024-102 5 024-122

U/L 5 x 5 Cuspid Hook 0° Torque Cuspid 3 024-104 3 024-124 5 024-104 5 024-124

U/L 5 x 5 Hooks 0° Torque Cuspid 3 024-105 3 024-125 5 024-105 5 024-125

victory Series™ Low profile bracket KITS

Torque Type Hook .018 in. .022 in.

Victory Series™ Twin MBT™ One Case Kits

U/L 5 x 5 3 017-451 3 017-551U/L 5 x 5 Cuspid 3 017-452 3 017-552


victory Series™ MINIATURE bracket kits

unitek™ full size twin bracket SystemMBT™ System Prescription

USA and PR 800.423.4588Canada 800.443.1661

17

Cuspid

Lateral


Central

Maxillary In/OutM/D

Width

17° 4° .80 4.0 UL 3 119-821 3 119-92117° 4° .80 4.0 UR 3 119-822 3 119-922

10° 8° 1.25 3.0 UL 3 119-823 3 119-92310° 8° 1.25 3.0 UR 3 119-824 3 119-924

-7° 8° .70 3.0 UL 3 119-825 3 119-925-7° 8° .70 3.0 UR 3 119-826 3 119-9260° 8° .70 3.0 D UL 3 119-861 3 119-9610° 8° .70 3.0 D UR 3 119-862 3 119-962

-7° 0° .70 3.0 UL 3 119-837 3 119-937-7° 0° .70 3.0 UR 3 119-836 3 119-936-7° 0° .70 3.0 D UL 3 119-865 3 119-965-7° 0° .70 3.0 D UR 3 119-866 3 119-966-7° 0° .70 3.0 UL 7119-837 7119-937-7° 0° .70 3.0 UR 7119-836 7119-936

-7° 0° 1.20 3.0 UL 3 119-839 3 119-939-7° 0° 1.20 3.0 UR 3 119-838 3 119-938-7° 0° 1.20 3.0 D UL 3 119-867 3 119-967-7° 0° 1.20 3.0 D UR 3 119-868 3 119-968-7° 0° 1.20 3.0 UL 7119-839 7119-939-7° 0° 1.20 3.0 UR 7119-838 7119-938


Off

set

Off

set

Symmetrical tie-wings withample under tie-wing area

Compound contouring forbase-to-tooth adaptation

Torque-in-base for level slot line-up

*SecondBicuspidTHK

UniversalBicuspids

* Optional – Compensated in/out for tooth size discrepancy

unitek™ full size twin bracket SystemMBT™ System Prescription

3Unitek18

Cuspid


Anterior

Mandibular In/OutM/D

Width


Off

set

Off

set

SecondBicuspid

FirstBicuspid

3 Appliance is available in APC™ II AdhesiveCoated Appliance System.

Note



If part number is preceded with “7” prefix, available welded to bicuspid bands.

-6° 0° 1.30 2.8 LL 3 119-841 3 119-941-6° 0° 1.30 2.8 LR 3 119-842 3 119-942-6° 0° 1.30 2.8 LL 3 119-843 3 119-943-6° 0° 1.30 2.8 LR 3 119-844 3 119-944

-6° 3° .70 3.0 LL 3 119-845 3 119-945-6° 3° .70 3.0 LR 3 119-846 3 119-9460° 3° .70 3.0 D LL 3 119-863 3 119-9630° 3° .70 3.0 D LR 3 119-864 3 119-964

-12° 2° .70 3.0 LL 3 119-851 3 119-951-12° 2° .70 3.0 LR 3 119-852 3 119-952-12° 2° .70 3.0 D LL 3 119-869 3 119-969-12° 2° .70 3.0 D LR 3 119-870 3 119-970-12° 2° .70 3.0 LL 7119-851 7119-951-12° 2° .70 3.0 LR 7119-852 7119-952

-17° 2° .70 3.0 LL 3 119-853 3 119-953-17° 2° .70 3.0 LR 3 119-854 3 119-954-17° 2° .70 3.0 D LL 3 119-871 3 119-971-17° 2° .70 3.0 D LR 3 119-872 3 119-972-17° 2° .70 3.0 LL 7119-853 7119-953-17° 2° .70 3.0 LR 7119-854 7119-954-17 2 1.20 3.0 LL 7119-855 7119-955-17 2 1.20 3.0 LR 7119-856 7119-956

smartclip™ Self-Ligating Appliance System

USA and PR 800.423.4588Canada 800.443.1661

19

Smooth radius surface for enhanced patient comfort

Notched tie-wings for additional bicuspid indentification

Lowest profile self-ligating bracket

Torque-in-base for level slot line up and improved finishing

Vertical scribe line for moreaccurate bracket placement

Familiar twin shape with rhomboidal design

Color-coded quadrant ID system

Optional APC™ Adhesive Coated ApplianceSystem or APC™ PLUS System with colorchange adhesive

Micro-etched 3-point contact base surface for anatomical contouring

THE CLIP

Designed for fast wire engagement and disengagement

Open, clean design forimproved patient hygiene

Pre-programmed “release” of the archwire

Precisely finished nickel-titanium

Available molar bracketsfor a complete 7x7 system

The SmartClip™ Self-Ligating Appliance System revolutionizes self-ligation. An integral

nickel-titanium clip permits easy and simple archwire insertion and removal, yet holds

the archwire with a pre-programmed force that avoids unintentional disengagement.

The SmartClip self-ligating bracket is offered in the MBT™ Prescription. If you are

among those who follow the MBT Philosophy and who also prefer a self-ligating

bracket, you will find that the SmartClip bracket fits right into your practice.



smartclip™ Self-Ligating Appliance SystemMBT™ System Prescription

3Unitek20

Off

set

Off

set

Off

set

Off

set


5Use this prefix to order APC™ PLUSAdhesive Coated Appliance Systemwith color change adhesive.



Maxillary Torque Ang. In/Out Distal L/Rin. mm Offset

Central 17° 4° .039 1.0 L 3 004-201 3 004-301 5 004-201 5 004-301

17° 4° R 3 004-202 3 004-302 5 004-202 5 004-302

Lateral 10° 8° .055 1.4 L 3 004-203 3 004-303 5 004-203 5 004-303

10° 8° R 3 004-204 3 004-304 5 004-204 5 004-304

Cuspid -7° 8° .030 .76 L 3 004-207 3 004-307 5 004-207 5 004-307

-7° 8° R 3 004-208 3 004-308 5 004-208 5 004-308

0° 8° L 3 004-211 3 004-311 5 004-211 5 004-311

0° 8° R 3 004-212 3 004-312 5 004-212 5 004-312

Cuspid Hook Distal -7° 8° .030 .76 L 3 004-209 3 004-309 5 004-209 5 004-309

-7° 8° R 3 004-210 3 004-310 5 004-210 5 004-310

0° 8° L 3 004-213 3 004-313 5 004-213 5 004-313

0° 8° R 3 004-214 3 004-314 5 004-214 5 004-314

Universal Bicuspid -7° 0° .036 .91 L/R 3 004-215 0 3 004-315 0 5 004-215 0 5 004-315 0

Universal Bicuspid -7° 0° .036 .91 L 3 004-217 0 3 004-317 0 5 004-217 0 5 004-317 0

Hook Distal -7° 0° R 3 004-218 0 3 004-318 0 5 004-218 0 5 004-318 0

*2nd Bicuspid THK -7° 0° .055 1.4 L/R 3 004-221 0 3 004-321 0 5 004-221 0 5 004-321 0

*2nd Bicuspid THK -7° 0° .055 1.4 L 3 004-223 0 3 004-323 0 5 004-223 0 5 004-323 0

Hook Distal -7° 0° R 3 004-224 0 3 004-324 0 5 004-224 0 5 004-324 0

1st Molar -14° 0° 10° L 3 004-2271 3 004-3271 5 004-2271 5 004-3271

-14° 0° 10° R 3 004-2282 3 004-3282 5 004-2282 5 004-3282

*Optional – Compensated In/Out for tooth size discrepancy.

Note APC™ System brackets sold in units of five.


USA and PR 800.423.4588Canada 800.443.1661

21

Off

set

Off

set

Off

set

Off

set

5Use this prefix to order APC™ PLUSAdhesive Coated Appliance System with color change adhesive.



.018 in. .022 in.APC™ II Adhesive Coated Appliance SystemMandibular Torque Ang. In/Out Distal L/R

in. mm Offset

Anterior -6° 0° .059 1.5 L/R 3 004-229 3 004-329 5 004-229 5 004-329

Cuspid -6° 3° .030 .76 L 3 004-231 3 004-331 5 004-231 5 004-331

-6° 3° R 3 004-232 3 004-332 5 004-232 5 004-332

0° 3° L 3 004-235 3 004-335 5 004-235 5 004-335

0° 3° R 3 004-236 3 004-336 5 004-236 5 004-336

Cuspid Hook Distal -6° 3° .030 .76 L 3 004-233 3 004-333 5 004-233 5 004-333

-6° 3° R 3 004-234 3 004-334 5 004-234 5 004-334

0° 3° L 3 004-237 3 004-337 5 004-237 5 004-337

0° 3° R 3 004-238 3 004-338 5 004-238 5 004-338

1st Bicuspid -12° 2° .035 .89 L 3 004-239 0 3 004-339 0 5 004-239 0 5 004-339 0

-12° 2° R 3 004-240 0 3 004-340 0 5 004-240 0 5 004-340 0

1st Bicuspid -12° 2° .035 .89 L 3 004-241 0 3 004-341 0 5 004-241 0 5 004-341 0

Hook Distal -12° 2° R 3 004-242 0 3 004-342 0 5 004-242 0 5 004-342 0

2nd Bicuspid -17° 2° .035 .89 L 3 004-247 0 3 004-347 0 5 004-247 0 5 004-347 0

-17° 2° R 3 004-248 0 3 004-348 0 5 004-248 0 5 004-348 0

2nd Bicuspid -17° 2° .035 .89 L 3 004-249 0 3 004-349 0 5 004-249 0 5 004-349 0

Hook Distal -17° 2° R 3 004-250 0 3 004-350 0 5 004-250 0 5 004-350 0

1st Molar -20° 0° 0° L 3 004-2553 3 004-3553 5 004-2553 5 004-3553

-20° 0° 0° R 3 004-2564 3 004-3564 5 004-2564 5 004-3564

Note APC™ System brackets sold in units of five.

Reorder Items5004-999 SmartClip™ Appliance System Accessory Kit (with Transbond™ Plus Self Etching Primer). Kit Includes:

7X7 Reusable Set Up Trays, SmartClip Typodont, SmartClip Appliance Hand Instrument (Wide)SmartClip Appliance Hand Instrument (Narrow), Transbond Plus Self Etching Primer 20 Unit BoxSmartClip™ System Instructional CD, SmartClip Bracket ID Card.014 Upper Nitinol Super-Elastic OrthoForm™ III Wire, .014 Lower Nitinol Super-Elastic OrthoForm III Wire.016X.022 Upper Nitinol Heat-Activated OrthoForm III Wire, .016X.022 Lower Nitinol Heat-Activated OrthoForm III Wire

5004-998 SmartClip Appliance System Accessory Kit (without Transbond Plus Self Etching Primer). Kit Includes:7X7 Reusable Set Up Trays, SmartClip Typodont, SmartClip Appliance Hand Instrument (Wide)SmartClip Appliance Hand Instrument (Narrow), SmartClip System Instructional CD, SmartClip Bracket ID Card.014 Upper Nitinol Super-Elastic OrthoForm III Wire, .014 Lower Nitinol Super-Elastic OrthoForm III Wire.016X.022 Upper Nitinol Heat-Activated OrthoForm III Wire, .016X.022 Lower Nitinol Heat-Activated OrthoForm III Wire

600-221 SmartClip Appliance System Typodont

600-226 SmartClip Appliance Detail Model (15X)

804-150 SmartClip Appliance Hand Instrument (Wide)

804-151 SmartClip Appliance Hand Instrument (Narrow)

2600-014 IDS Unit – 1 Drawer Set

2600-021 IDS Unit – 2 Drawer Set

2600-005 7X7 Reusable Set Up Tray

2600-032 APC™ System 7X7 Wall Dispensing Unit

2600-023 APC System Label Set

6600-820 SmartClip Appliance System Instructional CD

016-938 SmartClip™ System Patient Information Brochure

453-014 Literature Holder for Patient Brochure


3Unitek22





One Patient Kits - 6x6

U/L 6x6 1 Case Kit 3 004-106 3 004-126 5 004-106 5 004-126

U/L 6x6 Cuspid Hook 1 Case Kit 3 004-107 3 004-127 5 004-107 5 004-127

U/L 6x6 Hooks 1 Case Kit 3 004-108 3 004-128 5 004-108 5 004-128

U/L 6x6 0° Torque Cuspid 1 Case Kit 3 004-109 3 004-129 5 004-109 5 004-129

U/L 6x6 Cuspid Hook 0° Torque Cuspid 1 Case Kit 3 004-110 3 004-130 5 004-110 5 004-130

U/L 6x6 Hooks 0° Torque Cuspid 1 Case Kit 3 004-111 3 004-131 5 004-111 5 004-131





One Patient Kits - 5x5

U/L 5x5 1 Case Kit 3 004-100 3 004-120 5 004-100 5 004-120

U/L 5x5 Cuspid Hook 1 Case Kit 3 004-101 3 004-121 5 004-101 5 004-121

U/L 5x5 Hooks 1 Case Kit 3 004-102 3 004-122 5 004-102 5 004-122

U/L 5x5 0° Torque Cuspid 1 Case Kit 3 004-103 3 004-123 5 004-103 5 004-123

U/L 5x5 Cuspid Hook 0° Torque Cuspid 1 Case Kit 3 004-104 3 004-124 5 004-104 5 004-124

U/L 5x5 Hooks 0° Torque Cuspid 1 Case Kit 3 004-105 3 004-125 5 004-105 5 004-125

victory series™ buccal tubes

USA and PR 800.423.4588Canada 800.443.1661

23

Our compact, technically advanced Victory Series™

Buccal Tubes include a trouble-free integral convertible

cap that converts easily and consistently, every time.

All you have to do is lift and peel. This exclusive cap

also offers solid, one piece construction, eliminating

the possibility of braze or solder materials that can

leave a residue in the archwire slot. Victory Series

Buccal Tubes are designed with funneled and

radiused entries on both the headgear tube and archwire

slot, resulting in easy archwire insertion which can reduce

patient chairtime. Smooth, patient-friendly hooks

improve comfort for your patients. You’ll also appreciate

the strong construction, low-profile design and distal

notch that secures tie backs.

Victory Series Buccal Tubes. Reducing chair time,

increasing patient comfort and providing you with a well-

designed, reliable and predictable orthodontic solution.


victory series™ buccal tubesMBT™ System Prescription

3Unitek24

Upper 2nd Non-Convertible Single - Funneled

Torque Offset .018 in.L/R .022 in.

-19° 8° UL 3 067-873 1 3 067-973 1-19° 8° UR 3 067-872 2 3 067-972 2

Upper 1ST Convertible Double Combination - Occlusal Headgear


-14° 10° L .045 068-893 068-993-14° 10° R .045 068-894 068-994-14° 10° L .051 068-895 068-995-14° 10° R .051 068-896 068-996

Head Gear

Upper 1ST Convertible Single


-14° 10° L 3 068-897 1 3 068-997 1-14° 10° R 3 068-898 2 3 068-998 2

Upper 1ST Convertible Double Combination - Gingival Headgear

Torque Offset .018 in.L/R .022 in.Head Gear

-14° 10° L .045 068-885 068-985-14° 10° R .045 068-886 068-986-14° 10° L .051 068-887 068-987-14° 10° R .051 068-888 068-988

Upper 1ST Convertible Triple Combination - Occlusal Headgear

Torque Offset .018 in.L/R .022 in.Head Gear

-14° 10° L .045 068-889 068-989-14° 10° R .045 068-890 068-990-14° 10° L .051 068-891 068-991-14° 10° R .051 068-892 068-992

Bas

e

Bas

e

4 Buccal Tube is availablewith a bondable base.3213 Appliance is available in APC™ II Adhesive

Coated Appliance System.

Note

APC™ II Brackets sold in units of five. Measurements are in millimeters unless otherwise noted.


Upper 2ND Non-Convertible Single - Distal Notch


-14° 10° L 3 067-857 1 3 067-957 1-14° 10° R 3 067-858 2 3 067-958 2

Upper 1ST Non-Convertible Single - Funneled


-14° 10° UL 3 067-879 1 3 067-979 1-14° 10° UR 3 067-878 2 3 067-978 2

victory series™ buccal tubesMBT™ System Prescription

USA and PR 800.423.4588Canada 800.443.1661

25

Lower 1ST Convertible Double


-20° 0° L 3 067-861 3 3 067-961 3-20° 0° R 3 067-860 4 3 067-960 4

Lower 1ST Convertible Single


-20° 0° L 3 067-819 3 3 067-919 3-20° 0° R 3 067-820 4 3 067-920 4

Lower 2ND Non-Convertible Single - Distal Notch


-10° 0° L 3 067-816 3 3 067-916 3-10° 0° R 3 067-815 4 3 067-915 4

Lower 1ST Non-Convertible Single - Funneled


-20° 0° LL 3 067-877 3 3 067-977 3-20° 0° LR 3 067-876 4 3 067-976 4

Lower 1ST Non-Convertible Single


-20° 0° L 3 067-867 3 3 067-967 3-20° 0° R 3 067-868 4 3 067-968 4

Bas

e


Bas

e

Upper

Buccal Tubes for Partially Erupted Second Molars


-14° 0° L 3 066-407 1 3 066-507 1-14° 0° R 3 066-408 2 3 066-508 2

Lower


-10° 0° L 3 066-403 3 3 066-503 3-10° 0° R 3 066-404 4 3 066-504 4

Bas

e

Bas

e


4 Buccal Tube is availablewith a bondable base.3213 Appliance is available in APC™ II Adhesive

Coated Appliance System.

Note

APC™ II Brackets sold in units of five. Measurements are in millimeters unless otherwise noted.

victory series™ 2nd bicuspid tubesMBT™ System Prescription

3Unitek26

Metal Injection Molded,including integral hook

No need for ligatures to keepwire in place

No tie-wings to comeinto occlusion

Ligature wire channel

()

Chamfered tubeopening to assist inwire insertion

Same in-out dimensionas Victory Series™ 2nd Bicuspid brackets

Micro-Etched base

There is less chance ofocclusal interferencefrom tubes

• Ligation Free – no added sliding friction

• No Tie-Wings – less chance for occlusal interference

• Chamfered Tube Opening to assist in wire insertion

• Micro-Etched Base

• Available in APC™ Adhesive Coated Appliance System

• Offset Base Option

Off

set

Bas

e

AP

C™

PL

US

AP

C™

II

3 5 058-801 0 Lower Left 2nd Bicuspid Tube .018 Slot (-17° torque, 2° angulation)

3 5 058-802 0 Lower Right 2nd Bicuspid Tube .018 Slot (-17° torque, 2° angulation)

3 5 058-803 0 Upper Left / Right 2nd Bicuspid Tube .018 Slot (-7° torque, 0° angulation)

3 5 058-901 0 Lower Left 2nd Bicuspid Tube .022 Slot (-17° torque, 2° angulation)

3 5 058-902 0 Lower Right 2nd Bicuspid Tube .022 Slot (-17° torque, 2° angulation)

3 5 058-903 0 Upper Left / Right 2nd Bicuspid Tube .022 Slot (-7° torque, 0° angulation)

Note

APC™ II and APC™ PLUS Brackets sold inunits of five.


3 Use this prefix to order APC™ II AdhesiveCoated Appliance System. 5 Use this prefix to order APC™ PLUS Adhesive Coated

Appliance System with color change adhesive.



Victory series™ narrow contouredfirst molar bands

USA and PR 800.423.4588Canada 800.443.1661

27

Maxillary – Victory Series™ Narrow Contoured Molar Bands

Mandibular – Victory Series™Narrow Contoured Molar Bands

•Permanent laser ID marking

•Straight interproximal walls for reduced separation

•Reduced gingival/occlusal dimensions for less occlusal and gingival interferences

•Available with micro-etched inner surface for increased retention

•Curved festooned occlusal interproximal

•Increased occlusal “edge” strength for reduced deformation

victory series™ narrow contouredfirst molar bandsMBT™ System Prescription

3Unitek28

kits

maxillary or mandibularKit Trial Introduction Professional Master

RegularSize31 - 2 3 631+ - 2 3 632 - 2 4 832+ - 2 5 1033 2 3 6 1233+ 2 3 7 1434 2 4 8 1634+ 3 4 9 1935 3 5 10 2135+ 4 5 11 2336 4 5 11 2336+ 4 5 11 2337 3 5 10 2137+ 3 5 10 2038 2 4 9 1838+ 2 4 7 1439 2 3 6 1239+ 1 2 5 1040 1 2 3 640+ - 1 3 641 - 1 3 641+ - 1 1 142 - 1 1 142+ - 1 1 143 - 1 1 143+ - 1 1 144 - 1 1 1Quadrant Total 38 75 150 300Kit Total 76 150 300 600

Trial Introduction Professional Master

Micro-etchedNarrow Upper 901-408 901-401 901-404 901-406Narrow Lower 901-308 901-301 901-304 901-306

Non-etchedNarrow Upper 101-408 101-401 101-404 101-406Narrow Lower 101-308 101-301 101-304 101-306Average Cases Per Kit 3 to 5 10 to 15 40 to 50 90 to 100

victory series™ narrow contouredsecond molar bands

USA and PR 800.423.4588Canada 800.443.1661

29

Maxillary – Victory Series™ Narrow Contoured Second Molar Bands

Mandibular – Victory Series™ Narrow Contoured Second Molar Bands

•Permanent laser ID marking

•Straight interproximal walls for reduced separation

•Reduced gingival/occlusal dimensions for less occlusal and gingival interferences

•Available with micro-etched inner surface for increased retention

•Curved festooned occlusal interproximal

•Increased occlusal “edge” strength for reduced deformation

victory series™ narrow contouredsecond molar bandsMBT™ System Prescription

3Unitek30

kitsTrial Introduction Professional Master

Micro-etchedNarrow Upper 906-208 906-201 906-204 906-206Narrow Lower 906-108 906-101 906-104 906-106

Non-etchedNarrow Upper 106-208 106-201 106-204 106-206Narrow Lower 106-108 106-101 106-104 106-106Average Cases Per Kit 3 to 5 10 to 15 40 to 50 90 to 100

maxillary or mandibularKit Trial Introduction Professional Master

RegularSize28 - 2 4 728+ - 2 4 729 - 2 4 729+ - 2 4 730 - 2 4 830+ - 2 4 831 - 2 5 931+ - 3 5 1132 2 3 6 1232+ 2 3 6 1333 2 3 7 1433+ 3 4 8 1534 3 4 8 1634+ 4 4 9 1835 4 4 9 1835+ 4 4 8 1736 3 4 8 1636+ 3 4 7 1537 2 3 7 1337+ 2 3 6 1238 2 3 5 1138+ 1 2 5 1039 1 2 4 839+ - 2 4 740 - 2 3 740+ - 2 3 741 - 2 3 7Quadrant Total 38 75 150 300Kit Total 76 150 300 600

unitek™ proportionedbicuspid bands maxillary

MBT™ System Prescription

USA and PR 800.423.4588Canada 800.443.1661

31


Upper 147-401 147-402 147-403 147-404

Average Cases Per Kit 3 to 5 10 to 15 40 to 50 90 to 100

maxillaryKit Trial Introduction Professional Master

Size1 2 2 2 42 2 2 2 43 2 2 4 44 2 2 4 65 2 2 6 106 2 4 6 107 2 4 8 128 2 4 8 129 2 4 10 2010 2 4 14 3011 2 6 14 3012 4 6 16 5013 4 6 16 5014 4 10 20 5015 4 10 20 5016 4 10 20 5017 4 10 20 3018 4 10 20 3019 4 6 14 2020 2 6 12 2021 2 6 12 2022 2 6 10 2023 2 6 8 2024 2 4 6 1025 2 4 6 826 2 4 6 827 2 4 4 828 2 2 4 629 2 2 4 430 2 2 4 4Kit Total 76 150 300 600

•Broad buccal coverage for superior retention•Anatomy snaps into place over height of contour when seated•Slight occlusal and gingival edge enhances cement retention•Permanent laser ID

unitek™ proportionedbicuspid bands mandibularMBT™ System Prescription

3Unitek32

•Fully proportioned in all dimensions and contour, from one band size to the next•Universal anatomy fits rights and lefts•Kits may be split left/right for angulated brackets•Regular temper•Permanent laser ID

mandibularKit Trial Introduction Professional Master

Size1 2 2 2 22 2 2 2 23 2 2 2 24 2 2 2 25 2 2 2 26 2 2 2 27 2 2 2 68 2 2 2 69 2 2 2 610 2 2 4 811 2 2 4 812 2 4 10 2013 2 4 12 2214 2 6 16 3415 2 6 16 3416 2 8 4 4817 2 8 24 4818 2 10 24 4819 2 10 24 4820 2 10 24 4821 2 8 24 4822 2 8 14 3023 2 6 12 3024 2 6 12 3025 2 4 6 1226 2 4 6 1227 2 4 4 1228 2 2 2 429 2 2 2 430 2 2 2 431 2 2 2 432 2 2 2 233 2 2 2 234 2 2 2 235 2 2 2 236 2 2 2 237 2 2 2 238 2 2 2 2Kit Total 76 150 300 600


Lower 147-301 147-302 147-303 147-304

Average Cases Per Kit 3 to 5 10 to 15 40 to 50 90 to 100

USA and PR 800.423.4588Canada 800.443.1661

33

arch form and archwiresequencing

unitek™ nitinol heat-activated archwire......35

unitek™ nitinol super-elastic archwire............36

unitek™ nitinol classic archwire..............................37

unitek™ permachrome resilient archwire....38

unitek™ permachrome posted archwires........39

ARCHWIRE ACCESSORIES...................................................................40

arch form and archwire sequencingMBT™ System Prescription

3Unitek34

A review of the literature on arch form

reveals that three basic arch forms have

been described by many clinicians —

Tapered, Ovoid and Square.

When superimposed, they vary

primarily in inter-cuspid width, with a

range of approximately 5 mm. Inter-

molar widths are quite similar and the

posterior aspects of the archwires can

be widened or narrowed as needed.


Provides the most narrow inter-cuspid

width and is indicated for patients

with narrow, tapered arch forms. It is

particularly important to use this arch

form in patients with narrow arch

forms and gingival recession in the

cuspid and bicuspid regions, a

situation that occurs most frequently

in adult orthodontic cases.


Indicated for patients with broad

arch forms or in the first portion of

treatment in cases that require buccal

uprighting of the lower posterior

segments and expansion of the

upper arch.


Has been used most frequently by the

authors over the past fifteen years. By

using this arch form, along with

settling and retention procedures, post

treatment relapse has been minimized

in the majority of treated cases.




unitek™ nitinol heat-activated archwire

USA and PR 800.423.4588Canada 800.443.1661

35

DimensionInches

Dimensionmm

OrthoForm™ ITapered

OrthoForm™ IISquare

OrthoForm™ IIIOvoid

Un

itof

Use

Gol

d

Un

itof

Use

Gol

d

Un

itof

Use

Round

Upper.016 .41 4 293-701 4 296-985 4 296-991 6.018 .46 4 293-703 4 296-987 6 4 296-993 6.020 .51 4 293-705 4 296-983 4 296-995 6

Lower.016 .41 4 293-702 4 296-986 6 4 296-992 6.018 .46 4 293-704 4 296-988 6 4 296-994 6.020 .51 4 293-706 4 296-984 4 296-996 6

Rectangle/Square

Upper.016 x .022 .41 x .56 4 293-707 4 297-973 6 4 297-913 6

.0175 x .0175 .45 x .45 4 293-709 4 297-975 6 4 297-911 6.017 x .025 .43 x .64 4 293-711 4 297-991 6 4 297-921 6.019 x .025 .48 x .64 4 293-713 4 297-977 6 4 297-919 6.021 x .021 .53 x .53 4 293-715 4 297-979 6 4 297-917 6.021 x .025 .53 x .64 4 293-717 4 297-993 6 4 297-923 6

Lower.016 x .022 .41 x .56 4 293-708 4 297-974 6 4 297-914 6

.0175 x .0175 .45 x .45 4 293-710 4 297-976 6 4 297-912 6.017 x .025 .43 x .64 4 293-712 4 297-992 6 4 297-922 6.019 x .025 .48 x .64 4 293-714 4 297-978 6 4 297-920 6.021 x .021 .53 x .53 4 293-716 4 297-980 6 4 297-918 6.021 x .025 .53 x .64 4 293-718 4 297-994 6 4 297-924 6

unitek™ nitinol super-elastic archwire

3Unitek36

OrthoForm ITraditional

DimensionInches

Dimensionmm




Round

Upper.014 .36 4 293-601 4 296-805 6 4 296-911.016 .41 4 293-603 4 296-807 6 4 296-913.018 .46 4 293-605 4 296-809 6 4 296-915.020 .51 4 293-607 4 296-811 4 296-917

Lower.014 .36 4 293-602 4 296-806 6 4 296-912.016 .41 4 293-604 4 296-808 6 4 296-914.018 .46 4 293-606 4 296-810 6 4 296-916.020 .51 4 293-608 4 296-812 4 296-918

Rectangular/Square

Upper.016 x .016 .41 x .41 4 293-609 4 297-803 6 4 297-951.016 x .022 .41 x .56 4 293-611 4 297-801 6 4 297-953.017 x .025 .43 x .64 4 293-613 4 297-807 6 4 297-955.018 x .018 .46 x .46 4 293-615 4 297-809 6 4 297-957.018 x .025 .46 x .64 4 293-617 4 297-813 6 4 297-959.019 x .025 .48 x .64 4 293-619 4 297-815 6 4 297-961.021 x .025 .53 x .64 4 293-621 4 297-817 6 4 297-963

Lower.016 x .016 .41 x .41 4 293-610 4 297-804 6 4 297-952.016 x .022 .41 x .56 4 293-612 4 297-802 6 4 297-954.017 x .025 .43 x .64 4 293-614 4 297-808 6 4 297-956.018 x .018 .46 x .46 4 293-616 4 297-810 4 297-958.018 x .025 .46 x .64 4 293-618 4 297-814 6 4 297-960.019 x .025 .48 x .64 4 293-620 4 297-816 6 4 297-962.021 x .025 .53 x .64 4 293-622 4 297-818 6 4 297-964

Un

itof

Use

Un

itof

Use

Gol

d

Un

itof

Use

unitek™ nitinol classic archwire

USA and PR 800.423.4588Canada 800.443.1661

37

DimensionInches

Dimensionmm




Round

Upper.014 .36 4 293-510 4 296-405 4 296-517.016 .41 4 293-512 4 296-407 4 296-519.018 .46 4 293-514 4 296-409 4 296-521.020 .51 4 293-516 4 296-411 4 296-523

Lower.014 .36 4 293-511 4 296-406 4 296-518.016 .41 4 293-513 4 296-408 4 296-520.018 .46 4 293-515 4 296-410 4 296-522.020 .51 4 293-517 4 296-412 4 296-524

Rectangular/Square

Upper.016 x .016 .41 x .41 4 293-518 4 297-701 4 297-851.016 x .022 .41 x .56 4 293-520 4 297-703 4 297-853.017 x .022 .43 x .56 4 293-522 4 297-705 4 297-855.017 x .025 .43 x .64 4 293-524 4 297-707 4 297-857.018 x .018 .46 x .46 4 293-526 4 297-709 4 297-859.018 x .022 .46 x .56 4 293-528 4 297-711 4 297-861.018 x .025 .46 x .64 4 293-530 4 297-713 4 297-863.019 x .025 .48 x .64 4 293-532 4 297-715 4 297-865.021 x .025 .53 x .64 4 293-534 4 297-717 4 297-867

Lower.016 x .016 .41 x .41 4 293-519 4 297-702 4 297-852.016 x .022 .41 x .56 4 293-521 4 297-704 4 297-854.017 x .022 .43 x .56 4 293-523 4 297-706 4 297-856.017 x .025 .43 x .64 4 293-525 4 297-708 4 297-858.018 x .018 .46 x .46 4 293-527 4 297-710 4 297-860.018 x .022 .46 x .56 4 293-529 4 297-712 4 297-862.018 x .025 .46 x .64 4 293-531 4 297-714 4 297-864.019 x .025 .48 x .64 4 293-533 4 297-716 4 297-866.021 x .025 .53 x .64 4 293-535 4 297-718 4 297-868

Un

itof

Use

Un

itof

Use

Un

itof

Use

unitek™ permachrome resilient archwire

3Unitek38

DimensionInches

Dimensionmm




Un

itof

Use

Gol

d

Un

itof

Use

Un

itof

Use

Round

Upper.012 .30 4 293-303 4 300-603 4 300-003.014 .36 4 293-305 4 300-605 6 4 300-005.016 .41 4 293-307 4 300-607 6 4 300-007.018 .46 4 293-309 4 300-609 6 4 300-009.020 .51 4 293-311 4 300-611 6 4 300-011

Lower.012 .30 4 293-304 4 300-604 4 300-004.014 .36 4 293-306 4 300-606 6 4 300-006.016 .41 4 293-308 4 300-608 6 4 300-008.018 .46 4 293-310 4 300-610 6 4 300-010.020 .51 4 293-312 4 300-612 6 4 300-012

Rectangular/Square

Upper.016 x .016 .41 x .41 4 293-315 4 300-615 6 4 300-015.016 x .022 .41 x .56 4 293-317 4 300-617 6 4 300-017

.0175 x .0175 .45 x .45 4 293-331 4 293-341 4 293-351.017 x .022 .43 x .56 4 293-319 4 300-619 4 300-019.017 x .025 .43 x .64 4 293-321 4 300-621 6 4 300-021.018 x .022 .46 x .56 4 293-323 4 300-623 4 300-023.018 x .025 .46 x .64 4 293-325 4 300-625 6 4 300-025.019 x .025 .48 x .64 4 293-327 4 300-627 6 4 300-027.021 x .021 .53 x .53 4 293-333 4 293-343 4 293-353.021 x .025 .53 x .64 4 293-329 4 300-629 6 4 300-029

Lower.016 x .016 .41 x .41 4 293-316 4 300-616 6 4 300-016.016 x .022 .41 x .56 4 293-318 4 300-618 6 4 300-018

.0175 x .0175 .45 x .45 4 293-332 4 293-342 4 293-352.017 x .022 .43 x .56 4 293-320 4 300-620 4 300-020.017 x .025 .43 x .64 4 293-322 4 300-622 6 4 300-022.018 x .022 .46 x .56 4 293-324 4 300-624 4 300-024.018 x .025 .46 x .64 4 293-326 4 300-626 6 4 300-026.019 x .025 .48 x .64 4 293-328 4 300-628 6 4 300-028.021 x .021 .53 x .53 4 293-334 4 293-344 4 293-354.021 x .025 .53 x .64 4 293-330 4 300-630 6 4 300-030

unitek™ permachrome posted archwires

USA and PR 800.423.4588Canada 800.443.1661

39

DimensionInches

Spacingmm




Upper

.016 x. 022 44 293-101 300-725 300-931

.016 x. 022 42 293-103 300-726 300-932

.016 x. 022 40 293-105 300-727 300-933

.016 x. 022 38 293-107 300-728 300-934

.016 x. 022 36 293-109 300-729 300-935

.016 x. 022 34 293-111 300-730 300-936

.016 x. 022 32 293-113 300-731 300-937

.019 x .025 44 293-115 300-232 300-938

.019 x .025 42 293-117 300-233 300-939

.019 x .025 40 293-119 300-234 300-940

.019 x .025 38 293-121 300-235 300-941

.019 x .025 36 293-123 300-236 300-942

.019 x .025 34 293-125 300-237 300-943

.019 x .025 32 293-127 300-238 300-944

Lower

.016 x. 022 30 293-102 300-749 300-955

.016 x. 022 28 293-104 300-750 300-956

.016 x. 022 26 293-106 300-751 300-957

.016 x. 022 24 293-108 300-752 300-958

.016 x. 022 22 293-110 300-753 300-959

.019 x .025 30 293-112 300-244 300-960

.019 x .025 28 293-114 300-245 300-961

.019 x .025 26 293-116 300-246 300-962

.019 x .025 24 293-118 300-247 300-963

.019 x .025 22 293-120 300-248 300-964

ARCHWIRE ACCESSORIES

3Unitek40

Operatory OrthoForm™ TemplatesWhite templates for chairside use.701-724 (3) in package

Diagnosis OrthoForm™ TemplatesClear templates for overlay on patient model.701-723 (3) in package

USA and PR 800.423.4588Canada 800.443.1661

41

supporting products

MBT™ System Text Books...............................................................42

unitek™ positioning instruments..............................45

Typodontsunitek™ buccal tube converting pliers.............46

supporting productsMBT™ System Text Books

3Unitek42

“Systemized Orthodontic Treatment Mechanics”Systemized Orthodontic Treatment Mechanics(2001) from Drs. McLaughlin, Bennett and Trevisi, will be of great interest toorthodontists worldwide, and in particular, to MBT™ Versatile+ ApplianceSystem users.

Written by orthodontists, for orthodontists,this book provides the clinical orthodontistwith an accessible and practical guide tothe MBT System treatment philosophy. Itbrings together the four componentswhich make up modern treatmentmechanics: Bracket Design, BracketPositioning, Archwire Selection and ForceLevels. Currently in its sixth printing.014-436 (English)

Chapters Include:

1. A brief history and overview oftreatment mechanics

2. Appliance specifications: variations and versatility

3. Bracket positioning and case set-up

4. Arch form

5. Anchorage control during tooth leveling and aligning

6. Arch leveling and overbite control

7. An overview of Class II treatment

8. An overview of Class III treatment

9. Space closure and sliding mechanics

10.Finishing the case

11.Appliance removal and retention protocols

Available in nine languages and known as

“Book 3”, the book provides The

Definitive Statement of the MBT

Philosophy. It includes a range of treated

cases, showing step-by-step stages.

• Chinese ISBN 7-5433-1024-4

• English ISBN 072343171X

• German ISBN 3437055208

• Italian ISBN 88-85294-01-4

• Japanese ISBN 4-86034-801-X

• Korean ISBN 8986730715

• Polish ISBN 83-88063-68-5

• Portuguese ISBN 85-7404-058-4

• Spanish ISBN 84-8174-598-7

USA and PR 800.423.4588Canada 800.443.1661

43


“Orthodontic Management of the Dentitionwith the Preadjusted Appliance”. (Book 2)Demand has continued for this important text,which covers day-to-day management of thedentition. Predecessor to Systemized OrthodonticTreatment Mechanics, it looks at orthodontics in afresh and organized way, that allows you to fine-tune your treatment management strategies. Theauthors regard books 2 and 3 as being of equalimportance to those using the treatment system.

The English Edition is available by order to thePublisher ISBN 0723432651

Contents Include:

1. General information on research involved inbracket placement techniques as well asinformation on the use of the bracketplacement chart.

2. Individual information on each tooth in thedentition concerning general mechanicalconsiderations and common clinical concerns.

3. In each chapter a detailed discussion of the MBT™ BracketPrescription and rationale for use of these brackets is discussed in detail.


3Unitek44

Treatment GoalsThe MBT™ System has clear treatmentobjectives, which were initially described inBooks Two and Three, but which are now fullyencapsulated in a dedicated textbook – Facialand Dental Planning for Orthodontists and Oral Surgeons by Drs. G. William Arnett andRichard P. McLaughlin. Recently published, this includes a systemized and objectiveapproach to diagnosis and treatment planning.It successfully re-defines treatment goals anddiagnostic methods, and provides the finalelement in the MBT system.

Available by order to the publisher.

• English ISBN 0723433208

• Spanish ISBN 84-8174-847-1

• Korean ISBN 89-86730-88-X

unitek™ positioning instruments

USA and PR 800.423.4588Canada 800.443.1661

45

Unitek™ Bracket Positioning GaugesPrecision machined handles, color coded size,establishes proper bracket height, measured frombracket slot to inclusal/occlusal surface of tooth.

900-836 Positioning Gauge One (2.0 - 2.5 mm)900-837 Positioning Gauge Two (3.0 - 3.5 mm)900-838 Positioning Gauge Three (4.0 - 4.5 mm)900-839 Positioning Gauge Four (5.0 - 5.5 mm)900-840 Positioning Gauge Five (6.0 - 6.5 mm)900-841 Set of four Gauges (One - Four)

MBT™ BracketPositioning Guide701-725

Typodontsunitek™ buccal tube converting pliers

3Unitek46

Our high quality practice enhancement typodonts feature:

Victory Series™ MBT™ Rx Brackets 600-211Victory Series™ Low Profile MBT™ Rx Brackets 600-224Clarity™ Metal-Reinforced Ceramic Brackets 600-218SmartClip™ Self-Ligating Brackets 600-221

Unitek™ Buccal Tube Convertible Cap Removing PliersPrecision, stainless steel instrument uses reciprocal plier action toshear off the temporary cap on a convertible first molar buccal tube.

805-035 Buccal tube convertible cap removing pliers, kit (Kit includes complete pliers, allen wrench, spare tip, and instructions)

805-036 Replacement tips (5/pk)

USA and PR 800.423.4588Canada 800.443.1661

47

MBT™ System continuing education

Continuing education courses...................................48

TERMS AND CONDITIONS OF SALE..........................................50

Hand Instrument Warranty...............................................51

International Operations......................................................52













3Unitek50

Index, Warranty and OrderingCatalog Terms and Conditions of Sale

The Terms and Conditions of Sale apply to all products ordered from 3M Unitek.

OrdersTo facilitate filling your order, please be as specific as possible. Orders must specify product number, quantity desired and any descriptive information (e.g. size or color).

Items submitted in connection with Incognito™ Appliance System orders become the property of 3M Unitek and will not be returned.

Prices and TermsPlease consult our current price list or call our toll free number listed below. Policies and terms are subject to change without notice. Terms are net 30 days, except payment for the Incognito Appliance System is due at the time of the order.

ShipmentsAll shipments are FOB point of origin. Each shipment will be accompanied by an itemized packaging list. An invoice covering each shipment will be forwarded promptly.

Back-OrdersIn some instances, products listed in our catalog may be temporarily out of stock. In-stock items will be shipped immediately and any back-ordered items will be delivered as soon as possible. There will be NO additional shipping charges on Domestic back orders, however International shipments will be charged.

ReturnsStandard catalog products may be returned for credit within 90 days of date of shipment. Credit will be issued provided that: 1. Product is unused and in resaleable

condition; and2. A copy of the invoice of sale or the

package slip accompanies the product.

The following products are not returnable:1. Custom products (bands and bases

with welded assemblies) ), including the Incognito Appliance System

2. Doctor’s specials3. Products requiring refrigeration4. Opened chemical products

If the return is due to defective product or 3M Unitek error, full credit will be issued, provided the return is made within the period specified in any applicable 3M Unitek warranty. To facilitate your return, you must contact Customer Service at the number listed below to obtain an authorization number.

Product UseBuyer is responsible for evaluating whether a product is appropriate for a particular use or application. The conditions of evaluation, selection, and use of a product can vary widely and affect the use and application of a product. Because many of these conditions are uniquely within the buyer’s knowledge and control, it is essential that buyer evaluate whether the product is suitable and appropriate for a particular use or application.

Warranty and Limited RemedyExcept for the products with special warranty provisions noted below, 3M Unitek warrants that all products

are free from defects in materials and manufacture. 3M Unitek’s sole obligationand the buyer’s sole remedy in the event of any claimed defect shall be, at 3M Unitek’s option, repair of the product, replacement of the product, or refund of the purchase price. Written notice of claimed defect must be received by 3M Unitek at the address below within reasonable time after discovery not to exceed one year from the date of delivery.

Unitek™ Hand InstrumentsSpecial Warranty Information3M Unitek warrants that this instrument will be free from defects in materials and manufacture for a period of 1 year from the date of purchase. Failure to follow recommended use, maintenance and sterilization procedures will void all warranty claims. Recommended maintenance includes cutter tip/blade re-sharpening and reconditioning (cleaning, polishing, adjusting screw as necessary) every six months. 3M Unitek’s sole obligation and customer’s sole remedy in the event of a claimed defect shall be limited to, at 3M Unitek’s option, repair, replacement of the product, or refund of the purchase price.

All instruments should be sent to the 3M Unitek Authorized Service Center at the address below for evaluation to determine credit, replacement, or repair. The Authorized Service Center will determine, upon receipt of instrument, if the instrument is to be covered by warranty. Materials and manufacturing are the only items covered by this warranty. Misuse or abuse will void warranty. Buyer will be contacted regarding repair charges for out of warranty instruments.

USA and PR 800.423.4588Canada 800.443.1661

51

Index, Warranty and OrderingCatalog Terms and Conditions of Sale

Unitek™ Prestige Series Hand Instruments Special Warranty Information3M Unitek warrants that this instrument will be free from defects in materials, manufacture or separation of brazedcutting edges for a period of 1 year from the date of purchase. 3M Unitek further warrants that this instrument will be resistant to corrosion for 5 years from the date of purchase. Failure to follow recommended use, maintenance and sterilization procedures will void all warranty claims. Recommended maintenance includes cutter tip/blade re-sharpening and reconditioning (cleaning, polishing, adjusting screw as necessary) every six months. 3M Unitek’s sole obligation and buyer’s sole remedy in the event of a claimed defect shall be limited to, at 3M Unitek’s option, repair, replacement of merchandise, or refund of the purchase price.

All instruments should be sent to the 3M Unitek Authorized Service Center at the address below for evaluation to determine credit, replacement, or repair. The Authorized Service Center will determine, upon receipt of instrument, if the instrument is to be covered by warranty. Materials, manufacture, and corrosion resistance are the only items covered by this warranty. Misuse or abuse will void warranty. Buyer will be contacted regarding repair charges for out of warranty instruments.

3M Unitek – Authorized Service Center Precision Plier Service 14175 Telephone Avenue, Suite D Chino, CA 91710-5762 Phone: 1-800-229-9060 USA, Canada Worldwide: Phone: 909-590-2085 Fax: 909-590-8604.

Waiver of Implied WarrantiesALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE ARE DISCLAIMED.

Limitation of LiabilityExcept where prohibited by law, 3M Unitek will not be liable for any loss or damages arising from any product, whether direct, indirect, special, incidental or consequential, regardless of the theory asserted, including warranty, contract, negligence or strict liability.

Product ChangesProducts are continually undergoing refinement in design and manufacture. 3M Unitek reserves the right to improve, modify or discontinue products at any time.

Termination for Default3M Unitek may terminate an order, in whole or in part, if buyer is in breach of a material obligation and does not cure such breach to the reasonable satisfaction of 3M Unitek within ten (10) days of 3M Unitek’s written notice of intent to terminate the order for buyer’s default.

Protected Personal Health Information 3M Unitek sells certain custom products, including the Incognito™ Appliance System. In ordering these products the buyer may provide 3M Unitek with personal health information. 3M Unitek will comply with applicable law with respect to this information. The buyer warrants that it has obtained the necessary consent to send this information to 3M Unitek and for 3M Unitek to send this information to its vendors. To safeguard this information and to comply with applicable law, 3M Unitek has implemented healthcare information policies to protect this information, provided training to personnel with access to this information, implemented building access controls and tracking, implemented electronic data access controls, required its vendors to implement safeguards and comply with applicable law, and designed certain products and software with features such as encryption to assist the buyer in protecting personal health information.

WaiverAny failure or delay by either party in exercising any right or remedy provided by or relating to the order or these Terms and

Conditions does not constitute a waiver and shall not prohibit a party from exercising such right or remedy at a later time or from exercising any other right or remedy available.

Entire AgreementThese terms and conditions of sale constitute the entire agreement between the parties with respect to the product sale except for a. the price set by the applicable 3M Unitek price quotation, 3M Unitek price sheet, or separate pricing agreement; and by any additional 3M Unitek terms and conditions agreed to by the buyer electronically or in writing.

3M Unitek 2724 South Peck Road Monrovia, California 91016

General Information (Switchboard)U.S. and PR (800) 634-5300Worldwide (626) 574-4000

Phonemail MessagesU.S. and PR (800) 852-1990Canada (800) 433-1848

Technical HelplineU.S. and PR (800) 265-1943Worldwide (626) 574-4577

Customer Service PhoneU.S. and PR (800) 423-4588Canada (800) 443-1661Worldwide (626) 574-4000North America Lingual / Digital (800) 401-3001Europe Lingual +49 (0) 5472 9491-10

Customer Service FAXU.S. and PR (800) 328-2360Canada (800) 328-2360Worldwide (626) 574-4311

Unitek Replacement Parts for MetalCraft/ErgoDentalU.S. and PR (800) 433-1822Canada (626) 443-1661 ext 4692Worldwide (626) 574-4692

Online OrderingContact your local 3M Unitek representative for more information

INTERNATIONAL OPERATIONS

3Unitek52

3M Unitek Germany3M Unitek GmbHESPE Platz82229 Seefeld, GermanyTEL 49-8152-397-50-00FAX 49-8152-397-50-99

3M Unitek Greece3M Hellas Limited20, Kifissias Avenue15125 MarousiAthens, GreeceTEL (30) 210-688-5300FAX (30) 210-684-3281

3M Unitek Gulf3M Gulf Ltd.Dubai Internet CityP.O. Box 20191Dubai, UAETEL +971-4-3670777FAX +971-4-3670699

3M Unitek Italy3M Italia S.P.A.Orthodontic DivisionLocalita S. Felicevia San Bovio, 320090 Segrate (Milano)ItalyTEL (039) 02-7035-3524FAX (039) 02-7035-3525

3M Unitek K.K. JapanTokyo Reiki Building, 6-24-5Honkomagome, Bunkyo-kuTokyo, JapanTEL (81) 33-946-9581FAX (81) 33-946-5222

3M Unitek Portugal3M Unitek IberiaJuan Ignacio Luca de Tena, 19-2528027 MadridSpainTEL 34-91-321-6410FAX 34-91-321-6358

3M Unitek Spain3M SpainJuan Ignacio Luca de Tena, 19-2528027 - Madrid SpainTEL (34) 91-321-6410FAX (34) 91-321-6358

3M Sri Lanka3M LankaNo. 754 New Parliament RoadPelawattaBattaramullaSri LankaTEL 941-875701FAX 941-867891

3M Unitek Sweden3M Svenska ABBollstanäsvägen 3191 89 SollentunaSwedenTEL (46) 8-92-21-00FAX (46) 8-754-55-37

3M Unitek Switzerland3M Switzerland AGEggstrasse 93CH-8803 RüschlikonSwitzerlandTEL 41-1-724-92-51FAX 41-1-724-92-38

3M Unitek U.K. and Ireland3M Healthcare Ltd.3M Unitek3M HouseMorley StreetLoughboroughLeicestershireLE11 1EPU.K.TEL +44 (0) 1509 613305FAX +44 (0) 1509 613172

3M Unitek Vietnam3M Vietnam Ltd.34 Tran Quoc Thao StreetDistrict 3Ho Chi Minh CityViet NamTEL (84) 08-9302 044FAX (84) 08-9302 043

Regional Office3M Asia Pacific Pte. Ltd.9 Tagore LaneSingapore 787472TEL (65) 6 450 8783FAX (65) 6 458 5432

3M Unitek Australia3M Australia9-15 Chilvers RoadThornleigh, N.S.W. 2120AustraliaTEL 1300 363 484 or 61 2 9875 6370 orTEL 0800 441 622 New ZealandFAX 61 2 9875 6370or FAX 0800 441 620 New Zealand

3M Unitek Belgium3M Belgium N.V./S.A.Hermesiaan 7B-1831 DiegemBelgiumTEL (32) 754-438-68FAX (32) 2-253-3880

3M Unitek Brazil3M do Brasil S.A. 23300Via Anhanguera KM 110Caixa Postal 123CEP 13181-90-CEPIL100,Sumare, SP, Brasil, S.A.TEL 0800 153131FAX 0800 136363

3M Unitek China3M International Trading Co. Ltd.285 Gang Ao RoadWai Gao QiaoShanghai 200131People’s Republic of ChinaTEL (86) 216-275-3535FAX (86) 216-275-2343

3M Unitek Denmark3M Denmark a/sFabriksparken 152600 GlastrupDenmarkTEL 45-43-48-01-49FAX 45-43-96-85-96

3M Unitek FranceLaboratoires 3M SanteDepartment OrthodontieBoulevard de l’Oise95029 Cergy Pontoise CedexFranceTEL (33) 1-3031-8428FAX (33) 1-3031-8439

© 2002-2005 3M Company. All rights reserved. REF 016-909-4 0505 REV

In U.S. and Puerto Rico: 1-800-423-4588 • 626-574-4000In Canada: 1-800-443-1661Technical Helpline: 1-800-265-1943 • 626-574-4577CE Hotline: 1-800-852-1990 x 4649 • 626-574-4649Outside these areas, contact your local representative.

Printed on 50% recycledwaste paper, including 10%post-consumer waste paper.

The MBT™ Philosophy of Orthodontic TreatmentProduct Catalog

33M UnitekOrthodontic Products

2724 South Peck RoadMonrovia, CA 91016 USA

www.3MUnitek.com

of Orthodontic Treatment Philosophy - Almagro · PDF fileMost orthodontic professionals will agree that “successful bonding” is the single most important factor in keeping a practice

Documents