Multiconn Multiconn Srl Srl AUDI Systems High MMI 2G – MMI 3G AUDI Systems High MMI 2G – MMI 3G www.dasdvbt.com www.dasdvbt.com Installation and User Manual Installation and User Manual ver.1.0 ver.1.0 [to integrate with the user manual of DAS M32/M44] [to integrate with the user manual of DAS M32/M44] Fiber Optic Fiber Optic
8
Embed
Multiconn Srl AUDI Systems High MMI 2G – MMI 3G Installation and User Manual ver.1.0 [to integrate with the user manual of DAS M32/M44]
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Multiconn SrlMulticonn Srl
AUDI Systems High MMI 2G – MMI 3GAUDI Systems High MMI 2G – MMI 3G
www.dasdvbt.comwww.dasdvbt.com
Installation and User Manual Installation and User Manual ver.1.0ver.1.0 [to integrate with the user manual of DAS M32/M44][to integrate with the user manual of DAS M32/M44]
Fiber OpticFiber Optic
MMI 2G – MMI 3GMMI 2G – MMI 3G
1. To install the DASDAS®® receiver, refer to the specific user manual;
Warning on the connection of the power supply cableWarning on the connection of the power supply cable::
- RED wire (fig.3) must be RED wire (fig.3) must be DISCONNECTEDDISCONNECTED.. The switch (ON/OFF) of the receiver will be controlled by the Fiber-Optic activityThe switch (ON/OFF) of the receiver will be controlled by the Fiber-Optic activity
- YELLOW wire (fig.1)(fig.1) must be connected to the +12V permanent/battery- BLACK wire (fig.2)(fig.2) must be connected to the GND.
Multiconn SrlMulticonn Srl 2
Power supply cable 11
22
33
2. Disconnect the original Fiber Optical cable (fig.4)(fig.4) from one of the original multimedia accessories inside the car (DVD, GPS, Amplifier, etc…) and match it directly to DASDAS®® fiber optic female connector of the harness on equipment (fig.5)(fig.5).
3. Match the two other connectors of DASDAS®® harness (fig.6)(fig.6) respectively inside the original accessory (fig.7)(fig.7) and the other one inside DASDAS®® receiver (fig.8)(fig.8).
4. Connect one of the 3 DASDAS®® Video-OUT (fig.8)(fig.8) trough the adapter cables on equipment (fig.9) and the needed accessory (DCABFK-RCA in (fig.9) and the needed accessory (DCABFK-RCA in
fig.9.1)fig.9.1) with the Video-IN located on the original module FBASFBAS (fig.10)(fig.10) or on the Audi MultimediaAudi Multimedia module (fig.11).(fig.11).
Multiconn SrlMulticonn Srl 3
7777 88
66
55
88
99
88
99.1.1 99
MMI 2G – MMI 3GMMI 2G – MMI 3G
Multiconn SrlMulticonn Srl 4
Video-OUT
The FBASFBAS module (fig.10)(fig.10) is located on dashboard passenger side (for A4-A5-A6 model) or on the back of CD charger (for Q7 model).
1010
99.1.1
Video-IN
WARNINGWARNING: if the Head Unit module has not the greengreen fakra fakra connector, the car cannot accept an original or aftermarket TV tuner
Video-IN
1111
MMI 2G – MMI 3GMMI 2G – MMI 3G
The Audi MultimediaAudi Multimedia module (fig.11)(fig.11) is located under the main monitor (for A4-A5-A6 model) or on the back of CD charger (for Q7 model).
MMI2G – MMI3G User Manual:MMI2G – MMI3G User Manual:
Multiconn SrlMulticonn Srl 5
To enter in DASDAS TV tuner push MEDIAMEDIA, Source and select TV Tuner (like original TV Tuner).
Select AV Ext 1 for DASDAS Video IN 1 - Select AV Ext 2 for DASDAS Video IN 2
WARNING:WARNING: For the basic settings such as color, contrast, brightness and format, please refer to the menu of the car For the basic settings such as color, contrast, brightness and format, please refer to the menu of the car and make sure that the format is congruent with the set menu on the DAS.and make sure that the format is congruent with the set menu on the DAS.
Next ChannelNext Channel(RIGHT)(RIGHT)
Previous ChannelPrevious Channel(LEFT)(LEFT)
MMI 2G – MMI 3GMMI 2G – MMI 3G
Multiconn SrlMulticonn Srl 6
According to the model car, the main functions of the remote control are played either on the steering wheel or on the head-unit keyboard commands
Remote Control Functions:Remote Control Functions: