Spare Parts News Motorized Lubrication for Tower Cranes Your contact e-mail: [email protected] Gmob 03 09 EN Commercial non-contractual, reproduction prohibited Optional tooth lubrication • e lubrication of the teeth is ensured by a greasing pinion and a pumping element fixed on the unit; they are connected together by a hose • During operation, only the pinion face which is in contact with the slew ring receives the lubrication • is pinion is fixed by means of a support which needs to be welded on the towerhead System allowing the lubrication of the bearing race and the teeth of your slew ring with only one grease type OPTIONAL TOOTH LUBRICATION KIT For identification please contact the Potain Manitowoc Crane Care network Standard system for ring lubrication • e lubrication system only operates during a slewing motion and according to an adapted programming • e connection between the lubrication unit and the internal slew ring greasing points is carried out by hoses • e reservoir containing 1,2 kg of grease lasts for 3 to 6 months depending on the frequency of use • e system is equipped with a grease level monitoring device. A signal is displayed in the cab by means of a signal lamp • e reservoir is filled by means of a grease pump • 4 grease cartridges J-61032-65 are included in the kit Example: 10 module tooth kit Unit with 4 greasing points KITS for Standard System KIT 4 Internal Greasing Points K-21995-45 KIT 6 Internal Greasing Points L-21995-46 KIT 8 Internal Greasing Points M-21995-47
Motorized Lubrication for Tower Cranes/media/Files/MTW...Motorized Lubrication for Tower Cranes Your contact e-mail: [email protected] Gmob 03 09 EN Commercial
Apr 14, 2020
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Spare Parts News
Motorized Lubrication for Tower Cranes
Your contact e-mail: [email protected] 03 09 EN Commercial non-contractual, reproduction prohibited
Optional tooth lubrication• The lubrication of the teeth is ensured by a greasing
pinion and a pumping element fixed on the unit; they are connected together by a hose
• During operation, only the pinion face which is in contact with the slew ring receives the lubrication
• This pinion is fixed by means of a support which needs to be welded on the towerhead
System allowing the lubrication of the bearing race and the teeth of your slew ring with only one grease type
OPTIONAL TOOTH LUBRICATION KITFor identification please contact the
Potain Manitowoc Crane Care network
Standard system for ring lubrication • The lubrication system only operates
during a slewing motion and according to an adapted programming
• The connection between the lubrication unit and the internal slew ring greasing points is carried out by hoses
• The reservoir containing 1,2 kg of grease lasts for 3 to 6 months depending on the frequency of use
• The system is equipped with a grease level monitoring device. A signal is displayed in the cab by means of a signal lamp
• The reservoir is filled by means of a grease pump
• 4 grease cartridges J-61032-65 are included in the kit
Example: 10 module tooth kit
Unit with 4 greasing points
KITS for Standard SystemKIT 4 Internal Greasing Points K-21995-45
KIT 6 Internal Greasing Points L-21995-46
KIT 8 Internal Greasing Points M-21995-47
Related Documents
