Top Banner

of 7

MMI Install

Feb 17, 2018

Download

Documents

pasatese
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • 7/23/2019 MMI Install

    1/7

    MMI 3G Asia MAP Installation and Activation

    Covering Brunei, Malaysia and Singapore

    Version 1.0Q2 2014 (by KG)

    Step Instructions

    1. Switch on the MMI 3G.

    2.

    Enter the green menu (First press Setup and then CAR and hold both buttons downsimultaneously for approx. five seconds until the display changes.)

    3. Green Menu should come up

    4.

    Go to Navdatabase update

    And Press on Delete Nav HDD partition

    5. Please wait until you see the completion message below:

  • 7/23/2019 MMI Install

    2/7

    6.

    Once partition is deleted, please reboot MMI using the following key combination:

    7. MMI reboots and Navigation shows this message:

    8. Enter the green menu again (First press Setup and then CAR and hold both buttons down

    simultaneously for approx. five seconds until the display changes.)

    9.

    Go to Navdatabaseupdate

    And Change your Active HDD Nab DB to the Asia.

    1 - Unknown

    2 - Default

    3 - EU

    4 - NAR

    5 - South America

    6 - AGCC

    7 - Korea8 - Japan

    9 - China

    10 - Asia Pacific

    11 - South Africa

    12Australia & New

    Zealand

    13India

    14Turkey

  • 7/23/2019 MMI Install

    3/7

    10.

    Go to SWDL and ticket the box that says ignore region and variant

    11. Quit the green menu by pressing Navigationbutton on the key board.

    12.

    Insert the MAP SD card you have purchased into the MMI slot SD 1.

    13. First press Setup and then Return and hold both buttons down simultaneously for approx.

    five seconds until the display changes.

    Note only:You can quit the software download process at any time by simultaneously

    pressing and holding the Tone and Back buttons for more than five seconds.

    14. Press Update(this is the bottom right hand corner button in the MMIs key board

    15. Choose SD 1

    16.

    Please wait until reading is done.

  • 7/23/2019 MMI Install

    4/7

    17.

    Choose ROW 5.5.6 (MMI 3G)

    18. Waiting until reading Metainfo is finished (it does take long time)

    19.

    Choose Standard

    NOTE: Ensure that there is no voltage changes of the vehicle's battery, i.e. don't Switch off and on

    anything, Don't open and close doors or windows etc... Diagnostic tests using the tester/other

    operations may not be performed in parallel. Switch off all unnecessary electrical equipment

    (auto/daytime running lights, air-conditioning etc.) in the vehicle and leave it switched off

    throughout the update.

    20.

    Scroll down and Press Start download

  • 7/23/2019 MMI Install

    5/7

    21.

    Press Startand then please wait... Once the system has rebooted, the download application

    may show a screen that displays the update progress of various devices. As soon as all

    devices have registered with the download application, the update process is activated and

    the progress is shown on screen. The system may reboot many times during the update and

    programming session. This is carried out completely automatically and does not require you

    to take any action. Once the system has rebooted, updating is continued and the "Download

    progress" screen is displayed many times.

    22. Device Summary is displayed in the subsequent overview screen.

    23.

    Scroll down and select "Continue".24. Select Aboard Documentation

    25. Once MMI is rebooted for the final time, the maps are installed successfully but your map

    require activation, you see this message:

  • 7/23/2019 MMI Install

    6/7

    26.

    First press Setup and then Return and hold both buttons down simultaneously for approx.

    five seconds until the display changes.

    27. Insert the Map Activation SD you have purchased into slot SD 1of the MMI unit

    28. Press Update(Bottom right hand corner button)

    29. Choose SD 1

    30. Wait until reading is done.

    31. Choose MMI_34_D3_3

    32. Waiting until reading Metainfo is finished

  • 7/23/2019 MMI Install

    7/7

    33.

    Choose Standard

    34.

    Scroll down and Press Start downloadand then Start

    35. The unit will rebooted few times and then Device Summaryscreen is showing FSCas OK

    36. Scroll down and select "Continue".

    37.

    Select Aboard Documentation

    38. Once MMI is rebooted youre now ready to use your Maps.