Miniature open frame motion activated DVR The DVR is assembled on a printed circuit board measuring just 60x60 mm. Small size, ability to connect different cameras and power supplies, as well as easy setup makes it ideal for covert in- stallation. The DVR can be integrated into any piece of furniture, a folder, a plush toy, hidden in the interior of a car, etc. DVR is equipped with a PIR motion sensor, also small and unnoticeable. Thanks to it the device can stay in standby mode most of the time, filming only when there is some motion in the view of the camera. This dramatically reduces energy consumption and saves memory increasing autonomous working time of the device. You can choose from multiple levels of resolution and frame rates for your video recording. The re- cords are saved on a micro SD card with support for SDXC format (SDXC card capacity 64GB - 2TB). There is an optional version with a built-in Wi-Fi module which allows remote access to the DVR from a PC or a smartphone. Video Compression H.264/JPEG Video System NTSC/PAL (Auto detect) Video Resolution 1280x720 Frame Rate 2, 4, 6/8, 13/15, 25/30fps Video Recording Mode Schedule/ Continuous/ PIR recording mode Pre-recording/Post-recording Supported in standby time (PIR mode) Video Quality Low, Standard, High, Super Audio recording Yes Time/Date Stamp Yes Power Supply 12V DC/ Battery 5V input Storage Media Micro SD card, SDHC & SDXC (64GB~2TB) supported Control IR remote control Indicators LED, Buzzer Current Consumption 120mA (12V) in standby mode (main board only, without camera) Firmware Upgradeable Yes, through Micro SD card Playback via device itself or bundled software on PC Operating Temperature 0~+50°C Dimensions 60x60mm TECHNICAL SPECIFICATIONS