MILLING MOTORS WITH CONCENTRICITY CERTIFICATE * Except 530 FM ** 800 FME-Q/1050 FME-1/1050 FME-P TYPE 530 FM 800 FME 800 FME-Q 1050 FME-1 1050 FME-P Power input (Watt) 530 800 1050 1050 29.000 10.000 – 29.000 5.000 – 25.000 5.000 – 25.000 Certified concentricity** at intervals of 40 mm < 0,15 mm < 0,15 mm < 0,15 mm < 0,05 mm Collet system KRESS standard KRESS standard KRESS standard ER16 8 / 43 8 / 43 8 / 43 8 / 43 1,3 / 4 1,4 / 4 (Quick/FME-Q) 1,7 / 4 (Quick) 1,7 / 4 (Quick) Material matrix Wood ••• ••• ••• ••• Metals • •• ••• ••• Plastics •• ••• ••• Others Polystyrene, foam, etc. • •• ••• ••• High-precision work (Engraving, electronic circuit boards, etc.) ••• Features high-grade steel motor flange with double bearing spindle lock cut-off carbon brushes full wave electronics with speed pre-selection and tacho generator electronic overload protection mains cable with patented quick-action lock (FME-Q) Scope of delivery 8 mm precision collet, comes in a carton box 8 mm precision collet, comes in a carton box 8 mm precision collet, comes in a carton box 8 mm precision collet ER16 with balanced clamping nut, comes in a carton box Item number 06082301 06082101 06082112 06082206 06082701 ø mm ø mm ** comes with a collet and clamping nut concentricity certificate HIGH MILLING PERFORMANCE via high-grade steel flange with double bearing EXACT GUIDE AND CONCENTRICITY via precision collet OPTIMAL WORKING IN EACH MATERIAL via full wave electronics with speed pre-selection* SHORT CHANGEOVER TIME Mains cable module with patented quick-action lock** for easy and quick motor change MILLING TOOL CHANGE − easy and quick via spindle lock FITS EVERYWHERE − standardized 43 mm collar SOFT START-UP* and STARTING CURRENT LIMITING* CUT-OFF CARBON BRUSHES and ELECTRONIC OVERLOAD PROTECTION* to protect the motor 1050 FME-P 3x better repeatability of concentricity via – ER16 collet – balanced clamping nut – guaranteed concentricity in the cone < 0.01 mm NEW! of limited suitability suitable well-suitable • •• ••• NEW!