® LUBCON Service for the Wood Working Industry Friction Optimized Lubricants for the Lubrication of Machines and Processing Plants in the Wood Industry
® LUBCON Service for the Wood Working Industry
Friction Optimized Lubricants for the Lubrication of Machines and Processing Plants in the Wood Industry
Shorter through-put times, faster and more precise processes and more complex
production procedures increasingly demand significantly improved high-performance
lubricants. Today, low fuel and energy consumption, long lifecycles and optimized energy efficiency play
an ever increasing part in modern manufacturing. LUBCON assists you all around the world in selecting appropri-
ate lubricants and their availability.
LUBCON products are used at lumber yards, in further processing steps through to the manufacture of furniture
and other finished products. Especially with the production of MDF, PB, CB or even the associated lamination and
surface treatment, higher pressures and temperatures are achievable whilst reducing energy consumption (CPS)
through the use of LUBCON's specialized products.
Based on special high-speed greases with a potential speed of 3 million ndm, it is possible to open up new process-
ing opportunities of surfaces and edges thereby achieving faster through-put times and higher lot sizes. New
technologies such as thermally stable products (> 300°C) are used in compression plants and presses. Moreover,
all products come with optimized friction significantly reducing driving power and electricity consumption.
Forming the Future with LUBCON's Specialized Lubricants
Safety and Efficiency with High-PerformanceLubricants Under Extreme Conditions
LUBCON provides a wide range of specialized lubricants which meet the performance requirements of the wood
working industry. Gear oils with expertly blended additives, cleaning agents and preservatives plus numerous
greases and oils combined with lubrication systems made by LUBCON are available all around the world and
cover all tribological requirements of the wood working industry. Our specially refined high-performance lubricants
can be used for numerous applications and increase manufacturing reliability and performance.
LUBCON products are recommended and used by OEMs in the field of wood treatment, production of semi-
finished products, recycling of residual wood through to double belt presses and laminating presses. Lubricants by
LUBCON ensure a long lifetime based on their excellent wear protection and therefore they safeguard plant
availability and utilization.
We assist you not only in selecting the appropriate lubricants but may help you in identifying your exact require-
ments and implementing the best solution. Our technical service team will be available at all times both to OEMs
and end users.
Machinery and Systems for WoodworkingProduction of Semi-Finished Products Recycling of Residual Wood
Area/Machines
Roundwood yard
Sawmill
Conveyors
Side trimming machines,separating and segmenting machines, planing machines
Crushing, cutting,chipping machines and mills
Wood steaming, wood drying, impregnation plants
Applications
Gears - oil lubricated
Open
Enclosed
Gears - grease lubricated
Open
Enclosed
Pitch drives
Guide pillars
Ball screws
Linear guides
Guide ways
Drive chains/conveyor chains
Highspeed spindle bearings
Rolling bearings
high speed
Rolling bearings
medium speed
Temperature range
up to +60 °C
up to +60 °C
up to +160 °C
up to +60 °C
up to +60 °C
up to +160 °C
up to +60 °C
up to +60 °C
up to +150 °C
up to +240 °C
up to +70 °C
up to +80 °C
up to +120 °C
up to +160 °C
up to +160 °C
up to +80 °C
up to +120 °C
up to +160 °C
up to +160 °C
Lubricant Type
Oil
Oil
Oil
Grease spray
Fluid grease
Fluid grease
Grease spray
Grease
Paste
Grease
Grease
Oil
Sliding lacquer
Sliding lacquer
Oil
Spray
Oil
Oil
Grease
Grease
Grease
Grease
Grease
High temperature grease
High temperature grease
Grease
Grease
High temperature grease
High temperature grease
Products
®Turmogear oil PE Series
®Turmogear oil PE Series
®Turmopol oil 20 HD
®Grizzlygrease No. 1
®Turmopol grease 00
®Turmogear grease N 00 Y
Grizzlygrease No. 1
Grizzlygrease No. 1
®Turmopast TAS LMI
®Thermoplex 2 TML
®Thermoplex LC 302 EP
®Turmofluid ED 13
®Turmolyb MDC
®Turmopast TF
®Turmofluid ED 13
®LUBCON 4S-Fluid
®Turmofluid 40 B
®Turmofluid 300 OM
®Turmogrease Highspeed L 252
®Turmogrease L 802 EP plus
®Thermoplex 2 TML special
®Turmogrease PU 702
®Thermoplex 2 TML
®Sintono GPE 703
®Turmogrease Hitemp 2 A-F
®Turmogrease CAK 4002
®Turmogrease PHS 1002
®Turmogrease NBI 300
®Sintono MEGA 2
®Turmotemp II/400 KL
Machines and Plants forthe Industrial Wood Processing
Applications
Spindle bearings
Enclosed gears
Spindle bearings
Glue roll ball bearings
Pressure roll bearingsLinear guidesSupport chain bearingsSupport surface lubrication
Main spindles
Linear guides
Ball screws
Machine tool retainers
Powered tools
Drilling unit gears
Guide waysPneumatic cylinders
Linear guides
Release agent for
pressing areaHot plates
Conveyor chains
Conveyor roll bearingsOverhead conveyor bearingsConveyor chains
Guide ways, racks and pinions
Enclosed gears
Requirements
high speed
heavy loadhigh speed
high speed
high temperature
high temperature
high feed rates
heavy load
no sticking of dust
high speed
high feed rates
high speed
no sticking of dust
high speed
media resistant
high speed
heavy load
no sticking of dust
high temperature
no sticking of dust
media resistant
high temperature
media resistant
no sticking of dust
high speed
no sticking of dust
heavy load
high speed
Products
®Turmogrease Highspeed L 252®Thermoplex 2 TML special
® Turmopol grease 00®Turmogear oil PE Series
®Turmogrease Highspeed L 252®Sintono Mega 2
®Turmsilon grease mittel TF
®Sintono GPE 703®Thermoplex LC 302 EP®Thermoplex 2 TML
®Turmolyb MDC
LUBCON 4S-FLUID
®Turmogrease Highspeed L 252®Thermoplex LC 302 EP®Thermoplex ALN 1001/00
®Turmopast TF
®Thermoplex 2 TML®Turmogrease LC 252®Turmogrease Highspeed L 251
®Turmopol grease 00®Thermoplex 2 TML
®Thermoplex LC 302 EP®Turmopast TF®Turmopast NBI 2 white
®Sintono Mega 2®Turmolyb MDC
®Turmopast TF
®Turmofluid HYM 1®Turmopast TAS FM
®Turmofluid 300 OM®Turmofluid 460
®Turmogrease L 802 EP plus
®Turmofluid 300 OM®Turmofluid 40 B
®Turmolyb MDC®Turmolyb PSP®Turmopol grease 00
®Turmogear oil PE Series
Area/Machines
Sawing machines,milling machines,planing machines
Profiling, sizing and edge banding machines(double-end profiler)
Processing centres (CNC)
Automatic drilling machine (CNC)
Grinding machines
Cycle presses, gluing presses, laminating machines
Machines for surface treatment
Picking system,roller conveyor,warehouse management
Continuous Presses Double Belt PressesLaminating Presses
LUBCON provides the OEM of the woodworking industry with a complete product range. All
recommended products are listed in the lubrication chart of your equipment.
Products
Product
®Turmowood oil 1
®Turmowood oil 2
®Turmowood oil MKP Cleaner
®Turmotemp II 400 RS
®Turmofluid ED 13®LUBCON 4S Fluid
®Turmopast TF®Turmolyb WG
®Turmofluid HYM 1
®Turmopast TF
®Turmofluid MB-DL
®Turmofluid HLP
®Turmopast NBI 2 white®Turmopast MA 2
Bio Aktiv V 101
Maintenance Kit
Applications
CLS steelbelt roller bars
CLS bending rod chains
Cleaner for carpet chains
Drum bearings
Requirements
high temperature
low evaporation
high temperature
low carbon and good cleaning properties
cleaning and lubrication during operation
Area/Machines
Continous double belt
Continous lamitating press
Further applications
All kinds of sliding agents (can, spray)
Dry lubricants
Release agent(veneer presses)
Teflon spray
Compressor oil
Hydraulic oil
Assembly pastes
Cleaner
General maintenance products
LUBCON Products
Oils
Greases
Pastes/Sliding lacquers
Sprays
®Turmofluid 460®Turmofluid 40 B®Turmogear oil PE Series
®Turmopol oil 20 HD
®Sintono GPE 703®Sintono Mega 2
®Thermoplex 2 TML®Thermoplex 2 TML special®Thermoplex ALN 1001/00®Thermoplex LC 302 EP
®Turmogear grease N 00 Y®Turmogrease CAK 4002®Turmogrease Highspeed L 252®Turmogrease Highspeed L 251®Turmogrease Hitemp 2 A-F®Turmogrease L 802 EP plus®Turmogrease LC 252®Turmogrease NBI 300®Turmogrease PHS 1002®Turmogrease PU 702
®Turmopol grease 00®Turmotemp II/400 KL
®Turmsilon grease mittel TF
®Turmolyb MDC®Turmolyb PSP
®Turmopast NBI 2 white®Turmopast TAS FM®Turmopast TAS LMI®Turmopast TF
®Grizzlygrease No. 1®LUBCON 4S-FLUID
®Turmofluid 300 OM®Turmofluid ED 13®Turmofluid HYM 1
Colour/Structure
yellow/transparent
yellowish/transparent
light-coloured/transparent
yellow-orange/transparent
Colour/Structure
light beige-yellow/pasty
light beige-reddish/pasty
yellowish-transparent/pasty
yellow/pasty
light beige/fluid
beige/pasty
yellowish, beige/fluid
brown/pasty
beige/pasty
beige/pasty
rose-coloured-beige/pasty
light brown/pasty
light brown/pasty
beige, opaque/pasty
yellowish/pasty
light beige-yellowish/pasty
yellowish/fluid
white/pasty
light brown/pasty
Colour/Structure
black/- -
black grey/pasty
light beige/pasty
light-coloured, white/pasty
white/pasty
white/- -
Colour/Structure
brown/pasty
yellowish/opaque
green/transparent
clear/transparent
clear/transparent
Service temperature range (°C)
Service temperature range (°C)
Service temperature range (°C)
-20 up to +140
-40 up to +250
-20 up to +180
-30 up to +220
-40 up to +180
-30 up to +260
-35 up to +160
-70 up to +130
-40 up to +150
-50 up to +150
-40 up to +180
-20 up to +150
-50 up to +120
-50 up to +120
0 up to +260
-35 up to +140
-40 up to +120
-40 up to +180
-40 up to +160
-40 up to +180
-40 up to +130
-30 up to +260
-40 up to +230
-180 up to +450
-40 up to +450
-30 up to +150
-40 up to +1200
-40 up to +1200
-180 up to +260
Service temperature range (°C)
-30 up to +150
-50 up to +180
-5 up to +240
-45 up to +150
-30 up to +220
Description
Oil for chains, enclosed gears, rolling and sliding bearings
Fully synthetic, anti-ageing chain oil, extremely adhesive
Oil for gears, rolling bearings and chains
High temperature oil for gears under extreme loads
Description
Grease for extreme applications with high resistance to media
High temperature grease for rolling bearings
Fully synthetic high load grease for long-term applications
High performance grease for high speeds and low temperatures
Gear fluid with high resistance to temperature and ageing
High load grease for high speeds and very good resistance to media
Gear fluid with high resistance to media and pressure stability
Long-term grease with extreme water resistance and high load carrying capacity
High speed spindle bearing grease with extreme ageing resistance
High speed grease for bearings and helical gears
High temperature grease for extreme applications
Universal grease with very high pressure stability and resistance to vibrations and ageing
High speed spindle bearing grease with high resistance to media
High temperature grease for rolling bearings, e. g. electric motor bearings
Long-term grease for rolling and journal bearings, resistant to media
Long-term grease for rolling and journal bearings
Gear grease for high loads and ageing resistance
High temperature grease for extreme applications and high resistance to media
Silicone grease for low and high temperatures and high resistance to water
Description
Dry sliding lacquer based on MoS , quick drying2
Multipurpose assembly paste with solid lubricants
Multipurpose lubricating paste against friction and tribo-corrosion
Multipurpose metal free assembly paste for high temperature applications
High temperature assembly paste with H1 food grade registration
Dry sliding lacquer based on PTFE, quick drying
Description
Solid-free grease for gear drives with high pressure stability
Penetrating oil with PTFE for quick cleaning, lubricating and high protection
Lubricating oil for open drives and chains, resistant to pressure and ageing
Low viscosity oil with high penetrating properties, also for fine mechanics
Silicone-free release agent
Density g/ml at +20 °C
3(g/cm )
0,895
0,915
0,913-0,955
1,004
NLGI ClassDIN 51818
3
2
2
2
00
2
00
2
2
1
2
2-3
2
1-2
2
2
00
2
2
Available as aerosol
yes
yes
no
no
no
yes
Other packaging available
yes
yes
yes
yes
yes
Base oil viscosity DIN 51562 (mm /s)+40 °C/+100 °C
460/36
270/32
68-680
110/20
Base oil viscosity 2DIN 51562 (mm /s)
+40 °C/+100 °C
70/10,3
500/46,5
55/9
20/6
100/13,4
30/8,3
100/13,7
400/32
25/6
25/6
110/15
85/12
25/5,8
100/14
105/12,4
70/10,7
220/42
400/38
200/45
Base oil viscosity 2DIN 51562 (mm /s)
+40 °C/+100 °C
- -
200
100
200
200
- -
Base oil viscosity 2DIN 51562 (mm /s)
+40 °C/+100 °C
800/40
80/- -
3750/305
20/- -
46/- -
2
Flash pointDIN ISO 2592 (°C)
>+250
+280
>+220
>+220
Speed factor -1(mm · min )
ball bearings
1.300.000
350.000
1.300.000
1.600.000
- -
1.800.000
- -
300.000
2.200.000
- -
650.000
1.000.000
>1.800.000
750.000
700.000
1.300.000
- -
300.000
200.000
Corrosion protection
yes
yes
yes
yes
yes
yes
Corrosion protection
yes
yes
yes
yes
yes
Type of oil
Mineral
Ester/SHC
Ester/SHC
Polyglycol
Base oil/Thickener
Ester/PU
PFPE/PHS
Ester/Li
Ester/Li
PAO/inert organic
Ester/Li-Ca
SHC/PU
Mineral/Ca Complex
PAO, Ester/Li special
PAO, Ester/Li special
PPE/PHS
SHC, Mineral/Li special
SHC, Ester/Li special Ca
Ester/PHS
Mineral, SHC/PU
Ester/PU
Polyglycol/Li
PFPE/PTFE
Silicone/PHS
Base oil/Thickener
MoS2/solvent
Synthetic oil/Solid lubricant
Ca complex/PTFE
Synthetic oil/inorganic
Polyglycol/inorganic
PTFE/solvent
Base oil/Thickener
Min/Li-Ca special
SHC, PTFE/- -
synthetic/- -
synthetic/- -
synthetic/- -
Rele
ase
date
: 2011
-05-3
1If you would like to know more about our
and the we offer, please contact us...
Product Range
Services
This brochure only contains product information. For specific information please refer to our technical data and safety data sheets. The indications made represent the present state of development and knowledge of LUBRICANT CONSULT GMBH, which is subject to change without notification. The products are subject to severe controls of manufacture and comply in full with the specifications set forth by our company, but due to the multitude of different influencing factors, we cannot assume any warranty for the successful application in each individual case. Therefore, we recommend performing field tests. We strictly refuse any liability.
LUBRICANT CONSULT GMBH
Gutenbergstraße 13 63477 Maintal GERMANY P.O. Box 200 240 63469 Maintal GERMANYTel.: +49 6109/7650-0 Fax: +49 6109/7650-51 Email: [email protected] www.lubcon.com
Lubricants Lubrication Systems
LU
BC
ON
/Ger
- C
rd Indust
ry F
lyer
- 2010-0
9-0
9