Top Banner
Laser Beam Welding Laser Beam Welding Advait Phatarfod Advait Phatarfod 091040011 091040011
13

Laser Beam Welding(1)

Nov 08, 2014

Download

Documents

Rohan Viswanath

Laser Beam Welding(1)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript

Laser Beam Welding

Advait Phatarfod 091040011

What is Welding?

Welding is a materials joining process which produces coalescence of materials by heating them to suitable temperatures with or without the application of pressure or by the application of pressure alone, and with or without the use of filler material. Welding is used for making permanent joints. It is used in the manufacture of automobile bodies, aircraft frames, railway wagons, machine frames, structural works, tanks, furniture, boilers, general repair work and

What are the general types of welding?i). Arc welding Carbon arc Metal arc Metal inert gas Tungsten inert gas Plasma arc Submerged arc Electro-slag ii). Gas Welding

iv) Thermit Weldingv)Solid state welding Friction Ultrasonic Diffusion Explosive

iii). Resistance Welding Butt Spot Seam Projection Percussion

Oxy-acetylene Air-acetylene Oxy-hydrogen

vi)Newer welding Techniques Electron beam weldingLaser beam vii) Related Processes

Soldering Brazing Oxy-Acetlyene cutting Arc Cutting

What is Laser Beam Welding?

Laser beam welding(LBW) is a weldingtechnique used to join multiple pieces of metal through the use of a laser. The beam provides a concentrated heat source, allowing for narrow, deep welds and high welding rates. The process is frequently used in high volume applications, such as in the automotive industry.

Dual Beam Laser Welding-An Overview

Laser welding has been widely used in the automotive, aerospace, electronic, and heavy manufacturing industries to join a variety of materials. In the automotive industry, highpower lasers are used to weld many components such as trans- missions, mufflers, catalytic converters, exhaust systems, and tailor-welded blanks. A welding technique that combines two highenergy beam sources (either electron beams or laser beams), called dual-beam welding, has been investigated in recent years. Initial experimental studies showed the dual- beam process offered several advantages over the conventional single-beam process.

What is the Dual Beam Experiment?An experiment in which a high-power CO2 laser beam was split into two equal- power beams that were then used as a welding heat source indicated the dual- beam laser could significantly improve weld quality. It is a welding technique that combines two high-energy beam sources (either electron beams or laser beams) which has been investigated in recent years. Initial experimental studies have showed the dual- beam process offered several advantages over the conventional single-beam process.

Types of Dual Laser Beams

Side-by-side dualbeam laser is used to increase the fitup tolerance of workpieces.

Dual laser beams arranged in tandem (Fig. 1B) have been reported to provide benefits over conventional single-beam laser welding such as improved weld qualiity

How does it help?

The dual-beam process resulted in lower cooling rates, reduced hardness. Dual-beam laser processing was also reported to help reduce porosity and prevent cracking in laser welding of aluminum alloys. The quality of weld in dual beam is much higher than in single beam.

The Experiment

A high-power CO2 laser beam was split into two equal-power beams by a wedge mirror and the split beams, when focused on work pieces, were almost parallel. The dual-beam CO2 laser was used to weld steel and aluminum plates and conventional single-beam laser welding was also performed as a baseline. Weld characteristics such as surface quality, weld morphology, cracking susceptibility, weld hardness, and defects were analyzed and the dynamic behavior of vapor plumes was investigated using a high- speed camera.

Results

The dual-beam laser welds were always smooth and no defects were found for the welds made with the same welding parameters . A complete penetration weld was made using the dual- beam CO2 laser and the weld surface was quite smooth; the single-beam laser weld was irregular with some spatter Centerline cracking was present in a wide speed range in single-beam laser process- but was rarely observed in double beam. In dual-beam laser welding, plume fluctuation was observed, but the variation in plume size was much smaller.

Conclusions

1) Weld surface quality was significantly improved for both steel and aluminum using the dual-beam laser welding technique. 2)Vapor plume fluctuation was found to be suppressed in dual-beam laser welding. Fluctuation still was found, but the height and volume of the plumes varied slightly. 3) Weld spatter, weld hardness, and centerline cracking susceptibility were reduced in steel welds. 4) Porosity, irregular beads, and spatter were substantially de- creased in aluminum welds

References Dual

J.XIE American welding society ( www.aws.org) Wikipedia www.knowwelding.org

beam Welding Research by

THANK YOU