Top Banner
© 2013 City and Guilds of London Institute. All rights reserved. 1 of 19 Level 2 Diploma in Bench Joinery PowerPoint presentation Presentation 4 Unit 212: Produce setting out details for bench joinery products
19

L2 bench joinery unit 212 power point presentation 4

Apr 15, 2017

Download

Education

gsr101
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 1 of 19

Level 2 Diploma in Bench Joinery

PowerPoint presentation

Presentation 4

Unit 212: Produce setting out details for bench joinery products

Page 2: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 2 of 19

Level 2 Diploma in Bench Joinery

Aims of the sessionBy the end of this session you will be able to identify:

• different types of bench joinery materials

• the common defects found in joinery materials

• different sizes of materials used in bench joinery

• the tools used in bench joinery production.

Page 3: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 3 of 19

Level 2 Diploma in Bench Joinery

Joinery materialsTimber comes in many varieties:

• hardwoods• softwood• Canadian lumber sizes (CLS)• planed all round (PAR)• sawn• first-class joinery quality• plus many standards and types of man made board.

Most of these will be readily available and are in constant use within the construction industry. Some of the more valuable hardwoods may need to be ordered from your supplier.

Our main concern is with those materials used in the bench joinery section of industry.

Page 4: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 4 of 19

Level 2 Diploma in Bench Joinery

Types of timberOn the next slide you will find a list of timbers.

Using the internet, find out if they are hardwoods or softwoods.

Find a picture of each and produce a log book of species.

Page 5: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 5 of 19

Level 2 Diploma in Bench Joinery

Types of timber continuedPine Cedar Oak

Mahogany Cherry Greenheart

Fir Pruce Redwood

Teak Maple Walnut

Birch Hickory Hemlock

Ash Willow Beech

Redwood Iroko Utile

Merantti Weeping willow Tulip wood

Lignum vitae Western red cedar

Page 6: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 6 of 19

Level 2 Diploma in Bench Joinery

Joinery materials continuedIt used to be that softwood ‘sorted’ first-class joinery quality timber had to have no more than one knot every 300mm, but the modern major joinery companies now import timber that has had all blemishes, knots and natural defects removed and what is left is finger jointed together to give only top-quality timber.

There are many things to consider when choosing the type of timber to use:

• the client – he or she is paying, so it is their choice

• the architect – he or she interprets the client’s ideas and specifies the materials to be used

• how the log has been converted, eg through and through, tangential, quarter sawn, plain, rift. The type of end product will decide the type of log conversion to be used

• the buyer – can he or she source the correct timber for the job at the right price?

Page 7: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 7 of 19

Level 2 Diploma in Bench Joinery

Joinery materials continuedWe also need to consider:

• durability – how long will it last

• weight – how much will the finished product weigh; will it be too heavy?

• workability – how easy or difficult it is to use; will it produce the desired effect?

• ability to take preservatives and finishes.

And in the case of man-made boards:

• quality of finish

• interior

• moisture resistant (MR)

• weather and boil proof (WBP).

In most cases this will have been taken into consideration by the architect.

Page 8: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 8 of 19

Level 2 Diploma in Bench Joinery

Natural and seasoning defects• As with all naturally growing things, trees are subject to natural and

inflicted defects.

• Trees have natural defects – sloping grain, knots, shakes, upset, grain, waney edges, resin pockets, foreign bodies, decay, pith, blue stain, insect infestation.

• Seasoning defects, such as cupping, winding, twist, case hardening, bowing, springing, collapse, will all affect the selection of timber to be used in bench joinery production.

Page 9: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 9 of 19

Level 2 Diploma in Bench Joinery

Natural and seasoning defects

There are many other natural and seasoning defects. Look on the internet or use other sources to find two more examples and write a paragraph about each.

Cupping

Split end

Twisting

Cup shakeThunder shakeRing shake

Page 10: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 10 of 19

Level 2 Diploma in Bench Joinery

Sizes of timberHardwood is generally more expensive than softwood and as a result is used for decorative or aesthetic structural components where the ‘look’ of the finished timber is important.

There are a vast number of hardwoods available each having their own attraction. As a result, the timber is usually imported as boards of varying thicknesses which allows the end user to re-cut the board and finish it to the required dimension.

Hardwood is expensive. The price is subject to many factors but is related to its origin, which may be either temperate, sub-tropical or tropical. Because of this diversity, the sizes and sections will vary between region.

BS 5450:1977 gives the basic sizes of sawn hardwoods.

Page 11: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 11 of 19

Level 2 Diploma in Bench Joinery

Machines hardwood sizes12 x 50mm 9 x 47mm 32 x 38mm 27 x 35mm16 x 38mm 12 x 35mm 35 x 50mm 27 x 45mm

16 x 75mm 12 x 70mm 32 x 115mm 27 x 106mm

16 x 100mm 12 x 95mm 32 x 138mm 27 x 133mm

16 x 125mm 12 x 120mm 38 x 75mm 33 x 70mm

16 x 150mm 12 x 145mm 38 x 100mm 33 x 95mm

25 x 50mm 20 x 45mm 38 x 115mm 34 x 106mm

25 x 100mm 20 x 95mm 38 x 138mm 34 x 131mm

25 x 125mm 20 x 120mm 50 x 50mm 45 x 45mm

25 x 150mm 20 x 145mm 50 x 75mm 45 x 70mm

25 x 175mm 20 x 170mm 50 x 100mm 45 x 95mm

25 x 200mm 20 x 195mm 50 x 125mm 45 x 120mm

25 x 225mm 20 x 220mm 50 x 150mm 45 x 145mm

25 x 250mm 20 x 245mm 50 x 200mm 45 x 195mm

32 x 38mm 27 x 35mm 63 x 75mm 57 x 70mm

32 x 50mm 27 x 45mm 63 x 100mm 57 x 95mm

32 x 115mm 27 x 106mm 75 x 75mm 70 x 70mm

32 x 138mm 27 x 133mm 75 x 100mm 70 x 95mm

38 x 75mm 33 x 70mm 75 x 150mm 70 x 145mm

Page 12: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 12 of 19

Level 2 Diploma in Bench Joinery

Sizes of timber continuedSoftwood

The cross-sectional sizes of timber vary depending on whether supplies are from North America or Europe. If, for example, Canadian mills make no allowance for shrinkage when the wood is dried, a section 50mm x 100mm when sawn to that size would be reduced to say 46mm x 96mm when dried, whereas European mills cut their sections over size to allow for any shrinkage.

As timber hardly shrinks at all in length when dried it is not necessary to make any provision for this.

Page 13: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 13 of 19

Level 2 Diploma in Bench Joinery

Sizes of timber continuedWhere timber has to be re-sawn to produce smaller section sizes then allowances will have to be made for the sawn cut.

This is known as its ‘kerf’ and is usually about 2.5mm wide.

As an example, a 100mm x 50mm section is cut into four pieces 25mm x 50mm and would mean making three saw cuts at 2.5mm each. The result would be an undersized section approx 23mm x 50mm.

Page 14: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 14 of 19

Level 2 Diploma in Bench Joinery

Sizes of timber continuedIn machining any type of timber, the actual sizes available in the locality is all important. Waste must be avoided at all costs. The adoption of standard timber sizes will:

• reduce the overall cutting and machining waste

• reduce the time spent

• cut down on short lengths of timber building up in the workshop.

Basic hardwood sizes are shown as:

Depth x Thickness

mm x mm

Page 15: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 15 of 19

Level 2 Diploma in Bench Joinery

Structural timber sizesCommonly available target sizes of sawn softwood structural timber

Commonly available lengths of softwood structural timber

Source: BS EN 336:2003(E).

Page 16: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 16 of 19

Level 2 Diploma in Bench Joinery

Timber contentMoisture content and end user of timber

Moisture content (%) End user of timber

Air drying

28–30 Shrinkage begins

25 Pressure treated preservative or creosote

20–22 Sawn carcassing timber

17–18 External joinery timber and structural timber

14 Internal joinery for unheated buildings

10 Internal joinery for heated buildings

Kiln drying8–9 Internal joinery close to heating

source0–1 Oven dry

Page 17: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 17 of 19

Level 2 Diploma in Bench Joinery

Moisture

Image courtesy of David Walker. Reproduced with permission.

Page 18: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 18 of 19

Level 2 Diploma in Bench Joinery

Tools for setting and marking out

Combination squareCarpenter’s try square

Marking gaugeMortice gauge Cutting gauge

Set mitre

Combination gauge

Sliding bevel

Tape measure Range of steel rules

Squaring over box

American roofing square

Marking knife Dividers

Images courtesy of www.workshopheave.com; www.screwfix.com; www.shutterstock.com; David Walker. Reproduced with permission.

Framing square

Protractor, drawing set squares, compass, pencils

Page 19: L2 bench joinery unit 212 power point presentation 4

© 2013 City and Guilds of London Institute. All rights reserved. 19 of 19

Level 2 Diploma in Bench Joinery

Any questions?