Kötőelem , csavar, katalógus

Koelner SA has been singled out in the prestigious FORBES report, Forbes

Diamonds 2009, as amongst the most dynamically developing Company.

The Management Board of the Warsaw Stock Exchange hereby certi es that Koelner

SA securities were listed on 30 November 2004, which entitles the Company to use the

logo of Listed Company.

In 2008, in the contest organized by Roland Berger Strategy Consultants under the auspices of the

European Business Summit and CNN, KOELNER SA was awarded the title of Best of European

Business in the Growth category.A company is chosen through the process of syn-thetic assessment taking into account diversi ed

quantitative and qualitative criteria. The best and the most ef cient European Compa-

nies are the winners.

Puls Biznesu counted KOELNER Com-pany among the Pillars of the Polish

Economy in 2008.

Pillars of the Polish Economy include medium-sized and large companies which

conduct their business activities in a clear and honest way, achieve excellent

nancial results, but at the same time are highly committed to society, and know how to react positively to the needs of the local

people.

In 2007 KOELNER SA received EuroCerti ca-te. The distinction is a signal to other entities that they are dealing with a responsible, and

highly esteemed partner on the market. Having successfully gone through a three-stage as-

sessment, conducted by law, management and accounting specialists, the company may then

say it is reliable and honest.

www.koelner.czwww.koelner.pl1

UNO universal plug with screw 15

FIX expansion plugs with ange and countersunk head screw

17

FIX expansion plugs with ange and hooks 17

FIX expansion plugs without ange and with countersunk head screw

18

FIX expansion plugs without ange and with hooks 18

FIX expansion plugs without ange and with coachscrew 18

KS universal expansion plugs with countersunk head screw 20

KS universal expansion plugs with hooks 20

LSB and LSM stair-tread xings 21

KPU washbasin xings 22

KPM WC- xings 22

Door stops ball shaped 23

KGS steel anchors for aerated concrete

23

FF1 frame xing 25

KDS, KD, KDT frame xings with long expansion zone 27

KKS, KKD, KKT frame xings with short expansion zone 29

WHS and WHO hardened screws 31

O metal frame anchors and masking caps 32

PU adhesive for foamed polystyrene 32

Primers 32

Foam Gun 32

RPC PU foam cleaner 32

RPS and RPP handheld and gun grade PU foams 33

Silicones 34

p.

GENERAL AND FRAME FIXINGS concret

e

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB

2www.koelner.czwww.koelner.pl

FS bugle head drywall screws for metal 37

FT bugle head drywall screws for wood 37

FSC and FTC collated bugle head drywall screws 37

WS bugle head self drilling drywall screws 37

WS pan head self drilling drywall screws 37

FX hammer xing with steel nail

41

FX hammer xings with metric thread head connector screw 41

KMW Zn-Al alloy hammer xings with steel nail 42

KWD long expansion zone ham-mer xings with countersunk head and steel nail

43

DRA plasterboard xings 43

SM metal cavity xings 44

AT metal cavity xings setting tools 44

SPO spring toggles 45

BIGIPS cavity xings with coun-tersunk cross-head screw PZ2 and agle hook

45

KTS sleeve anchor with round hook 46

TMS brass anchor with round hook 46

SRS ceiling wire hanger 46

Z-KSP ceiling spring pin 47

GS ceiling wedge anchor 47

Hangers, channel connectors, angle sections, brackets, fasten-ers for suspended ceilings

47

Plaster & dry-wall beads 49

Thermal insulation beads 50

GKT tapes 50

PLASTER BOARD FIXINGS AND CONNECTORS

p.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

wood

pro

led sh

eet

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

plywo

od

steel

ITB


FACADE THERMAL INSULATION FIXINGS

p.

KI-10 xings 53

KI-10M xings 54

KI-10N xings 55

KI-10NS xings 56

TFIX-8M xings 57

KWL insulation holding ange 58

Facade insulation xings in bags 58

KC insulation ange with masking cap 59

MKI re resistant metal insulation supports

60

KIK xings

61

KES polysterene cap 61

KSF plastic cutter 61

Spacers 61

Plinth sections connector 61

HR sca olding hooks 61

HRK expansion plugs 61

Masonry connector 61

KWB hammer in wall ties 62

Expansion plugs for KWB wall ties 62

NKRK Expansion plugs with long expansion zone for KWB 62

KWK screw in wall ties 62

L type wall ties 63

MULTI type wall ties 63

Joint vents for cavity walls 63

Retaining clip with draining nozzle 63

Setting tool for KWB wall ties 63

conc

rete

brick

stone

cellu

lar b

rick

cera

mic

hollo

w br

ick

grav

elite

conc

rete

wood

plyw

ood

ETA

conc

rete

blo

cks

silica

te b

rick

hollo

w br

ick

hollo

w cla

y pot

light

conc

rete

block

s

aera

ted

conc

rete

chipb

oard

ITB


ROOFING INSULATION FIXINGSp.

GOK Plastic sleeve for xing insu-lations layers to at roofs 67

GOK-PLUS Plastic sleeve with an additional function of clamping to at roofs

67

Steel washer deep type 68

Steel washers at type 68

WO Self-tapping fastener to the plate max. 0.9 mm 70

WX Self-drilling fastener to the plate max. 2 x 1.25 mm

70

WB Self-drilling fastener

72

WW Fastener to wood substrates 72

WBT Self-tapping fastener for concrete 72

WCS Self-tapping fastener for concrete 72

K08L Expansion plug to the self-tapping fastener 73

Installation ends 73

SDS+ Drills for concrete 73

SDS Adapter for cone drill bit 73

G-WB080 Cone drill bit for concrete 73

PE Polyethylene insulation foil 73

Adapter bit 73

Fixing selector for appropriate thickness of roo ng insulation 74

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB


FARMER self drilling screws with EPDM washer 77

Self drilling stitching screws with reduced drilling point to 2.5 mm Staples

78

EPDM washer 79

Closed-end waterproof aluminum blind rivets 79

OC type self drilling screws with drilling capacity up to 3 mm 81




ON and ONP type self drilling screws with drilling capacity up to 12 mm

83

Self drilling screws for xing the composite panels OC and ON 84

Wafer head screws zinc plated 86

EPDM washer 87

Sealing caps 87

Stainless steel self drilling screws with reduced drilling point to 2.5 mm STAPLES

88

Stainless steel self drilling screws with reduced drilling point to 3 mm STAPLES

88

OCS stainless steel self drilling screws with drilling capacity up to 6 mm

89

ONS stainless steel self drilling screws with drilling capacity up to 12 mm

90

OCS and ONS stainless steel self drilling screws for xing the com-posite panels

91

ODWS stainless steel self drilling screws for xing composite panels 92

Sealing of tile and trapezoidal sheets 93

Universal seals 94

Self-adhesive polyurethane sealing insulation tapes 94

Tools and accessories 94

SELF DRILLING FIXINGSp.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipw

ood

wood

pro

led sh

eet

ITB


PATron MX powder actuated tool 96

PATron MX powder actuated tool accessories 96

Strip cartridges 96

Single and stripe nails for concrete and steel 97

Grease for PATron MX

Cordless gas nailer SC 40; nails and fuel cells 99

Frame nailer WW90CH; nails and fuel cells 100

Nails and fuel cells for frame nailer WW90CH in cartons 100

Cordless gas 2nd x nailers and brads 101

Metal connector nailer 38 mm and nails 101

Industrial pneumatic strip framing nailer 102

Coil nailers 103

Nails for coil nailers 103

Oil compressors 104

SPIT powder actuated tools 105

Nails for SPIT tools 105

Cartridge disks for SPIT tools 105

SP-MAX Rebar tying tool 106

Accessories for SP-MAX tool 106

DIRECT FASTENING FIXINGS, TOOLS AND ACCESSORIES

p.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB


R-CAS-V spin in capsule 115

R-HAC-V hammer in capsule (studding) 117

R-KEX Epoxy resin 119

R-KEM+ Styrene free polyester resin 121

R-KER Epoxy acrylate resin 123

R-KF2 Polyester resin 125

CFS Cartridge free dispensing system 127

RV200 Vinylester styrene free resin 300ml 128

RP30 Polyester resin 300 ml 130

RM50 Polyester styrene free resin 300ml 132

COPY-ECO Reinforcement system 134

Bonded anchor studs 135

Internally threaded sockets 136

Dispenser guns 136

Additional socket drivers and adaptors for SDS MAX

137

Mesh sleeves, blow pumps, caps, brushes 137

R-XPT, R-XPT-HD and R-XPT-A4 Throughbolts 139

R-HPT Troughbolt 141

Safetyplus 145

Rawlbolt 147

R-DCA and R-DCL wedge anchors 153

Setting tools for wedge anchors 154

SR and SRS throughbolts 155

KT and KTS sleeve anchors 157

Brass anchors 158

HEAVY DUTY ANCHORS p.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB


Threaded rods 160

Hexagon studs connector 160

Zinc plated wafer head screws 160

Special countersunk at head hardened screws

161

Countersunk at head hardened chipboard screws

162

Hexagonal head coachscrews din 571

163

Decking screws 164

Stud screws zinc plated 164

Furniture screws 164

Common nails DIN 1151B 165

Masonry nails 165

Roo ng nails 165

Spiral shank nails DIN 68163A 166

Ring shank nails DIN 68163K 166

Ring shank timber nails 166

Roo ng nail washers 166

Galvanized fence staples 166

Chains 167

Steel ropes zinc plated

167

Plaited polypropylene ropes (coiled on reels)

167

Elastic ropes(Coiled on reels)

167

Ropes accessories 168

Tensioners 170

THREADED RODS, WASHERS, NUTS, SCREWS, NAILS, CHAINS, ROPES

p.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB


WOOD CONNECTORS, POST BASES AND HINGES

p.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB

D-BP Coiled strapping

173

D-WB, D-WC, D-WD Joist hangers 173

D-SP, D-SP-LP Rafter twist straps 175

D-LP Strap ties plus 176

D-PP Tie plates 176

D-LX, D-LA Perforated angle brackets 177

D-T T-shaped strap ties 177

D-LWG Strap ties 178 D-KB Unequal length angle brackets 178

D-ZK Equal length angle brackets L-shaped 179

D-ZU Universal angle brackets 179

D-MI, D-MK, D-KF, D-KP Equal length angle brackets 180

D-ZN Unequal length angle brackets plus 182

D-ZS Equal length brackets 135 plus 182

D-ZKR Adjustable angle brackets 183

D-I Anchor nails 183

D-ED Two-sided spiked plate 183

D-KN L shaped strap ties

184

D-MS Angle connector wide type 184

D-PD Batten roo ng strut 184

D-TB, D-TU Post base with base-plate 185

D-TC, D-TCR, D-TL, D-TA Post base with embedment rebar 185

D-TD, Hammer in post base 186

D-OP Pergola bracket 186

Hinges 187


UNO Universal expansion plugs 190

Frame xings 190

Drywall screws for steel and timber 191

Drywall screws self drilling 191

Hammer xings nylon 191

Rawlnut exi-plug 191

Tap-in 191

Nylon self drill 191

Plasterboard plugs 191

Intersets 191

Self-drilling Farmer screws with EPDM washers z/p 192

Wafer head screws electro zinc plated 192

Wafer head self drilling screws electro zinc plated 192

Window tting screws with co-untersunk head with self-tapping coarse thread z/p

192

Self-drilling window screws with countersunk head with self-tapping ne thread z/p

192

Pan head self-tapping screws for sheet metal with cross head 193

Fitting screw 193

Hardened chipboard Premium screws with countersunk head zinc plated

193

Decking screws 193

R-KEM+ Styrene free polyester resin 194

DIY RANGEp.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB


Universal expansion plugs 195

FIX expansion plugs 196

Washbasin xing set 197

WC xing set 197

Stair tread xings 197

Frame xings 198

Hammer xings 199

Zamak hammer xings 199

Sleeve anchors 200

Metal frame anchors 200

Hardeners frame concrete screws

200

Expansion anchors 200

Fine thread drywall screws 201

Plasterboard xings 202

Metal cavity anchors 202

Plastic spring toggle 203

Spring toggle bolts 203

Hardened chipboard screws with countersunk pozi drive head PZ2 204

Wafer head screws 204

Self-drilling screws with EPDM washer 205

Self-tapping pan head screws for sheet metal, zinc plated

205

Angle and round screw hooks 206

Socket head furniture screw 206

Machine screws, zinc plated 206

DIY RANGEp.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB

12

DIY RANGEp.

conc

rete

hollo

w blo

ckwo

rk

brick

plaste

rboard

plywo

od

steel

plasti

c she

et

ETA

aerat

ed co

ncret

e

stone

hollo

w bri

ck

chipb

oard

wood

pro

led sh

eet

ITB

Washers and nuts 209

Nails 207

Cable clips 209

Felt pads 209

Ball shaped door stops 209

Quick links 209

DIY sets 210

Hose clamps 210

Door latch 210

Steel anchors for aerated concrete 210

Pins 210

FIX expansion plugs 211

Hammer xings 211

Fine thread drywall screws 211

FIX plugs MIX 212

Hammer xings MIX 212

Nails MIX 212

General FixinGs

Gene

ral an

d fram

e fixi

ngs

G en e

r al a

n d f r

a me

f i xi n

g s

G en e

r al a

n d f

r am

e f i

x in g

s

G

e

n

e

r

a

l

a

n

d

f

r

a

m

e

f

i

x

i

n

g

s

Ge

ne

ra

l

an

d

fr

am

e

fi

xi

ng

s

G

e

n

e

r

a

l

a

n

d

f

r

a

m

e

f

i

x

i

n

g

s

G

e

n

e

ra

l

fi

x

in

g

s

14www.koelner.plwww.koelner.pl

Additional elements prevent spinning in the hole

2

Anti-rotational fins

3

Unique zigzag design, offering instant secure plug expansionthroughout the entire length

4

Additional grip feature

Optimal internal design provides an even expansion and fixing leading the screw through the plug

5

6

Expands at top giving instant grip

1

Description:Universal plug made of high quality polypropylene or nylon. Suitable to use in every kind of substrate. Cleverly designed an inventive packag-ing helps to choose the right drill and screw size for plug installation.UnivErSAl plUg

UNO

General FixinGsGeneral FixinGs

www.koelner.plwww.koelner.pl15

General FixinGs

UnivErSAl plUg

Product codemm mm pcs. pcs.

Uno-05+330 5 3.530 100 2400Uno-06+430 6 4.030 100 2400Uno-06+435 6 4.035 100 2400Uno-06+445 6 4.045 100 2400Uno-08+435 8 4.535 100 2400Uno-08+450 8 4.550 100 2400Uno-08+560 8 5.060 100 1800Uno-10+540 10 5.040 100 1200Uno-10+650 10 6.050 100 1200Uno-10+660 10 6.060 100 1200

Product codePolyprolylen

Product codenylon (grey) mm mm mm pcs. pcs.

Uno-k-05 r-Uno-n-05 5 24 3.0-4.5 200 4800Uno-k-06 r-Uno-n-06 6 28 3.5-5.0 200 4800Uno-k-07 - 7 30 4.0-6.0 100 2400Uno-k-08 r-Uno-n-08 8 32 4.5-6.0 100 2400Uno-k-10 r-Uno-n-10 10 36 5.0-8.0 100 1200


P-Uno-06k 6 3.535 200 2400


P-Uno-06S 6 3.535 200 2400

Product codePolyprolylen

Product codenylon (grey) mm mm mm pcs. outer

Uno-yel-96-C r-Uno-yel-96n 5 24 3.0-4.5 96 10Uno-reD-48-C r-Uno-reD-48n 6 28 3.5-5.0 48 5Uno-reD-96-C r-Uno-reD-96n 6 28 3.5-5.0 96 10Uno-brn-48-C - 7 30 4.0-6.0 48 5Uno-blU-40-C r-Uno-blU-40n 8 32 4.5-6.0 40 5Uno-blU-80-C r-Uno-blU-80n 8 32 4.5-6.0 80 10Uno-gry-40-C r-Uno-gry-40n 10 36 5.0-8.0 40 5Uno-gry-80-C r-Uno-gry-80n 10 36 5.0-8.0 80 10

5Yellow

6Red

7Brown

8Blue

10Grey

UNIVERSAL PLUG UNOwith AnglE hOOk

UNIVERSAL PLUG UNOwith rOUnd hOOk

UNIVERSAL PLUG UNOwith COUntErSUnk hEAd SCrEw

UNO

All SUBStrAtES

ApprOvAlS

ApprOvAlSApprOvAlS

ApprOvAlS


Size 5 6 7 8 10Plug diameter d [mm] 5 6 7 8 10Hole diameter in substrate d0 [mm] 5 6 7 8 10Hole diameter in fixture dfix [mm] 6 7 8 9 11Minimum hole depth h0 [mm] 34 38 40 42 46Installation depth hnom [mm] 20 24 26 28 32Minimum substrate thickness hmin [mm] 50 55 60 65 70

MECHANICAL PROPERTIES

PERfORMANCE dATA IN [KN] PERfORMANCE dATA IN [Kg]

Size 5 6 7 8 10Installation depth hnom [mm] 20 24 26 28 32ConCrete C20/25Characteristic resistance nrk [kn] 1.39 1.48 0.89 1.25 3.59Design resistance nrd [kn] 0.77 0.82 0.49 0.69 1.99recommended loads nrec [kn] 0.55 0.59 0.35 0.49 1.42SolID brICk 7.5 MPaCharacteristic resistance nrk [kn] 0.47 0.85 0.32 0.68 0.69Design resistance nrd [kn] 0.19 0.34 0.13 0.38 0.38recommended loads nrec [kn] 0.14 0.24 0.09 0.27 0.27aerateD ConCrete 600Characteristic resistance nrk [kn] 0.27 0.63 0.51 0.48 0.42Design resistance nrd [kn] 0.13 0.31 0.25 0.24 0.21recommended loads nrec [kn] 0.09 0.22 0.18 0.17 0.15CavIty brICk 15 MPaCharacteristic resistance nrk [kn] 0.72 0.51 0.71 0.95 1.18Design resistance nrd [kn] 0.29 0.20 0.28 0.38 0.47recommended loads nrec [kn] 0.21 0.14 0.20 0.27 0.34Hollow brICk 15MPaCharacteristic resistance nrk [kn] 0.39 0.51 0.60 0.81 0.92Design resistance nrd [kn] 0.15 0.20 0.24 0.32 0.37recommended loads nrec [kn] 0.11 0.14 0.17 0.23 0.26PlaSterboarD MIn. 12.5 MMCharacteristic resistance nrk [kn] 0.17 0.21 0.25 0.26 0.34Design resistance nrd [kn] 0.07 0.08 0.10 0.10 0.13recommended loads nrec [kn] 0.05 0.06 0.07 0.07 0.09

Size 5 6 7 8 10Installation depth hnom [mm] 20 24 26 28 32ConCrete C20/25Characteristic resistance nrk [kg] 139.0 148.0 89.0 125.0 359.0Design resistance nrd [kg] 77.0 82.0 49.0 69.0 199.0recommended loads nrec [kg] 55.0 58.6 35.0 49.3 142.1SolID brICk 7.5 MPaCharacteristic resistance nrk [kg] 47.0 85.0 32.0 68.0 69.0Design resistance nrd [kg] 19.0 34.0 13.0 38.0 38.0recommended loads nrec [kg] 13.6 24.3 9.3 27.1 27.1aerateD ConCrete 600Characteristic resistance nrk [kg] 27.0 63.0 51.0 48.0 42.0Design resistance nrd [kg] 13.0 31.0 25.0 24.0 21.0recommended loads nrec [kg] 9.3 22.1 17.9 17.1 15.0CavIty brICk 15 MPaCharacteristic resistance nrk [kg] 72.0 51.0 71.0 95.0 118.0Design resistance nrd [kg] 29.0 20.0 28.0 38.0 47.0recommended loads nrec [kg] 20.7 14.3 20.0 27.1 33.6Hollow brICk 15MPaCharacteristic resistance nrk [kg] 39.0 51.0 60.0 81.0 92.0Design resistance nrd [kg] 15.0 20.0 24.0 32.0 37.0recommended loads nrec [kg] 10.7 14.3 17.1 22.9 26.4PlaSterboarD MIn. 12.5 MMCharacteristic resistance nrk [kg] 17.0 21.0 25.0 26.0 34.0Design resistance nrd [kg] 7.0 8.0 10.0 10.0 13.2recommended loads nrec [kg] 5.0 5.7 7.1 7.1 9.4

L

d


INSTALLATION


Product codemm mm mm pcs. pcs.

FIX-K-06K 6 30 3.535 200 4800FIX-K-08K 8 40 4.550 100 2400FIX-K-10K 10 50 6.055 100 1200FIX-K-12K 12 60 8.065 50 600


FIX-K-06S 6 30 3.550 200 4800FIX-K-08S 8 40 4.565 100 1200FIX-K-10S 10 50 6.085 50 600


FIX-K-06+ 6 30 3.530 200 4800FIX-K-06+340 6 30 3.540 200 4800FIX-K-06+350 6 30 3.550 200 2400FIX-K-06+435 6 30 4.035 200 4800FIX-K-06+440 6 30 4.040 200 4800FIX-K-06+450 6 30 4.050 200 2400FIX-K-08+ 8 40 5.045 200 2400FIX-K-08+450 8 40 4.550 200 2400FIX-K-08+460 8 40 4.560 100 1200FIX-K-08+550 8 40 5.050 100 1200FIX-K-10+560 10 50 5.060 100 1200FIX-K-10+660 10 50 5.060 100 1200


FIX-K-12H 12 60 8.0130 25 300

Product codeIpolypropylene PP

Product codePolyamide PA 6.0 (nylon) mm mm pcs. pcs.

FIX-KK-06 FIX-NK-06 6 30 250 6000FIX-KK-08 FIX-NK-08 8 40 200 2400FIX-KK-10 FIX-NK-10 10 50 100 1200FIX-KK-12 FIX-NK-12 12 60 50 600FIX-KK-14 FIX-NK-14 14 70 25 600Mega packFIX-KK-06M FIX-NK-06M 6 30 - 35000FIX-KK-08M FIX-NK-08M 8 40 - 15000FIX-KK-10M FIX-NK-10M 10 50 - 8000FIX-KK-12M FIX-NK-12M 12 60 - 4500FIX-KK-14-070M FIX-NK-14-070M 14 70 - 3000

FIX WITH FLANGE

FIX WITH FLANGEwith countersunk head screw

FIX WITH FLANGEwith angle hook

FIX WITH FLANGEwith pig tail hook

FIX WITH FLANGEwith round hook

suBstrate

eXpansion plugs


Fix expansion pluGs

MATERIAL:Plug sleeve: polyamide PA 6.0 (Nylon) or impact resistant co-polymer of polypropylene PPScrew: zinc electroplated steel ~10 m.

TyPIcAL APPLIcATIoNS:Shelving and cabinetsSuspended ceilingsSwitch boxesTrunking and cable traysBoilersWater heaters & radiators

approvals

approvals

approvals

approvals

approvals


nylon on request

FIX WITHOUT FLANGE

FIX WITHOUT FLANGEwith countersunk head screw

FIX WITHOUT FLANGEwith angle hook

FIX WITHOUT FLANGEwith coachscrew

FIX WITHOUT FLANGEwith pig tail hook

FIX WITHOUT FLANGEwith round hook


FIX-05+* 5 25 3.530 200 4800FIX-06+ 6 30 3.530 200 4800FIX-06+340 6 30 3.540 200 4800FIX-06+350 6 30 3.550 200 4800FIX-06+435* 6 30 4.035 200 4800FIX-06+440 6 30 4.040 200 4800FIX-06+450 6 30 4.050 200 4800FIX-08+ 8 40 5.045 200 2400FIX-08+450* 8 40 4.550 200 2400FIX-08+460 8 40 4.560 200 2400FIX-08+550 8 40 5.050 200 2400FIX-08+560 8 40 5.060 100 1200FIX-08+580 8 40 5.080 100 1200FIX-08+100 8 40 5.0100 100 1200FIX-10+550 10 50 5.050 100 1200FIX-10+560 10 50 5.060 100 1200FIX-10+660 10 50 6.060 100 1200FIX-10+680 10 50 6.080 50 600FIX-10+100 10 50 6.0100 50 600FIX-10+120 10 50 6.0120 50 600FIX-10+160 10 50 6.0160 25 300FIX-12+680 12 60 6.080 50 1200FIX-12+100 12 60 6.0100 50 600FIX-12+120 12 60 6.0120 50 600

Product codepolypropylene PP

Product codePolyamide PA 6.0 (nylon) mm mm pcs. pcs.

FIX-K-05 FIX-N-05 5 25 400 9600FIX-K-06 FIX-N-06 6 30 250 6000FIX-K-08 FIX-N-08 8 40 200 2400FIX-K-10 FIX-N-10 10 50 100 1200FIX-K-12 FIX-N-12 12 60 50 1200FIX-K-14 FIX-N-14 14 70 25 600Mega packFIX-K-05M FIX-N-05M 5 25 - 50000FIX-K-06M FIX-N-06M 6 30 - 35000FIX-K-08M FIX-N-08M 8 40 - 15000FIX-K-10M FIX-N-10M 10 50 - 8000FIX-K-12M FIX-N-12M 12 60 - 4500FIX-K-14-070M FIX-N-14-070M 14 70 - 3000FIX-K-14-100M FIX-N-14-100M 14 70 - 3000


FIX-06K 6 30 3.535 200 4800FIX-08K 8 40 4.550 100 2400FIX-10K 10 50 6.055 100 1200FIX-12K 12 60 8.065 50 600

Product codepolypropylene PP

Product codePolyamid PA 6.0Nylon mm mm mm pcs. pcs.

FIX-06S - 6 30 3.550 200 4800FIX-08S FIX-N-08S 8 40 4.565 100 1200FIX-10S FIX-N-10S 10 50 6.085 50 600


FIX-10/660 10 50 6.060 100 1200FIX-10/680 10 50 6.080 50 600FIX-10/100 10 50 6.0100 50 600FIX-10/120 10 50 6.0120 50 600FIX-12/60 12 60 8.060 50 600FIX-12/70 12 60 8.070 50 600FIX-12/80 12 60 8.080 50 600FIX-12/100 12 60 8.0100 50 600FIX-12/120 12 60 8.0120 50 600FIX-12/140 12 60 8.0140 25 300FIX-12/160 12 60 8.0160 25 300FIX-12/180 12 60 8.0180 25 300FIX-12/200 12 60 8.0200 25 300FIX-14/80 14 70 1080 25 300FIX-14/100 14 70 10100 25 300FIX-14/120 14 70 10120 25 300FIX-14/160 14 70 10160 25 300FIX-14/180 14 70 10180 25 300FIX-14/200 14 70 10200 25 300FIX-14/220 14 70 10220 25 125FIX-14/260 14 70 10260 25 125


FIX-12H 12 60 8.0130 25 300

suBstrate

eXpansion plugs

General FixinGs

approvals

approvals

approvals

approvals

approvals


Size 5 6 8 10 12 14Plug diameter d [mm] 5 6 8 10 12 14Hole diameter in substrate d0 [mm] 5 6 8 10 12 14Hole diameter in fixture dfix [mm] 6 7 9 11 13 15Minimum hole depth h0 [mm] 35 40 50 60 70 80Installation depth hnom [mm] 25 30 40 50 60 70Minimum substrate thickness hmin [mm] 55 60 70 80 90 100


PERfORMANCE dATA IN [KN]

PERfORMANCE dATA IN [Kg]

INSTALLATION

Size 5 6 8 10 12 14Installation depth hnom [mm] 25 30 40 50 60 70ConCrete C20/25Characteristic resistance nrk [kn] 0.38 0.22 0.64 0.85 2.64 2.99Design resistance nrd [kn] 0.20 0.10 0.30 0.40 1.30 1.50recommended loads nrec [kn] 0.14 0.07 0.21 0.29 0.93 1.07SolID brICk 7.5 MPaCharacteristic resistance nrk [kn] - - 0.93 0.92 2.42 1.49Design resistance nrd [kn] - - 0.45 0.45 1.20 0.75recommended loads nrec [kn] 0.32 0.32 0.86 0.54aerateD ConCrete 600Characteristic resistance nrk [kn] - - 1.13 0.73 1.47 1.33Design resistance nrd [kn] - - 0.55 0.35 0.75 0.65recommended loads nrec [kn] 0.39 0.25 0.54 0.46

Size 5 6 8 10 12 14Installation depth hnom [mm] 25 30 40 50 60 70ConCrete C20/25Characteristic resistance nrk [kg] 38.0 22.0 64.0 85.0 264.0 299.0Design resistance nrd [kg] 20.0 10.0 30.0 40.0 130.0 150.0recommended loads nrec [kg] 14.3 7.1 21.4 28.6 92.9 107.1SolID brICk 7.5 MPaCharacteristic resistance nrk [kg] - - 93.0 92.0 242.0 149.0Design resistance nrd [kg] - - 45.0 45.0 120.0 75.2recommended loads nrec [kg] 32.1 32.1 85.7 53.7aerateD ConCrete 600Characteristic resistance nrk [kg] - - 113.0 73.0 147.0 133.0Design resistance nrd [kg] - - 55.0 35.0 75.0 65.0recommended loads nrec [kg] 39.3 25.0 53.6 46.4

General FixinGs


UNIVERSAL EXPANSION PLUGS

UNIVERSAL EXPANSION PLUGSUNIVERSAL EXPANSION PLUGS

UNIVERSAL EXPANSION PLUGS

with COUntErSUnk hEAd SCrEw with pz rECESS with AnglE hOOk

with rOUnd hOOk


kS-06040 6 40 4,040 200 2400kS-06050 6 40 4,050 200 2400kS-06060 6 40 4,060 200 2400kS-08050 8 50 4,550 100 1200kS-08060 8 50 4,560 100 1200kS-08070 8 50 4,570 100 1200kS-10060 10 60 5,060 50 600kS-10070 10 60 5,070 50 600kS-10080 10 60 5,080 50 600kS-10100 10 60 5,0100 25 300


kS-06k 6 40 3,550 200 2400kS-08k 8 50 4,565 100 1200


kS-06S 6 40 3,565 200 2400kS-08S 8 50 4,585 100 1200


kS-06 6 40 200 3600kS-08 8 50 200 2400kS-10 10 60 100 1200MasterkS-06M 6 40 200 3600kS-08M 8 50 200 2400kS-10M 10 60 100 1200

SUBStrAtE

General FixinGs

uniVersal expansion pluGs

MaterIal:Plug sleeve:polyamide Pa 6.0 (nylon) or impact resistant co-polymer of polypropylene PPScrew:electro-zinc coated steel ~10 m.

tyPICal aPPlICatIonS:Shelving and cabinets Suspended ceilings Switch boxes trunking and cable trays boilers water heaters & radiators

INSTALLATION


SEt COntEntS:

expansion plug, countersunk head screw, 4 levelling washers.

SEt COntEntS:

2 expansion plugs, 2 stud screws, 2 nuts, 2 off-centre washers, 2 masking caps.

FOr inStAllAtiOn On StEEl StAirCASE StringErS

FOr inStAllAtiOn On COnCrEtE StAirCASE StringErS

CENTRE PUNCHESFOr StAir trEAdS

STAIR-TREAD FIXINGS

STAIR-TREAD FIXINGS

Product codeS1 l1 S2 l2

mm mm mm mm pcs. pcs.lSM 14 20 9 10 25 600

Product codeS2

mm pcs.lSb-P 8 2

Product codeS1 l1 S2 l2

mm mm mm mm pcs. pcs.lSb 14 22 8 40 25 600

SUBStrAtE

SUBStrAtE

General FixinGs

INSTALLATION

INSTALLATION


SEt COntEntS:

2 masking caps 2 expansion plugs

2 countersunk head screws 2 nuts

SEt COntEntS:

2 expansion plugs, 2 snap-fit sleeves,

2 hexagonal head screws, 2 masking caps.

WASHBASIN FIXINGS

WC-FIXINGS


kPU100 10 50 M880 1 125kPU120 12 60 M8100 1 100kPU140 12 60 M8120 1 75kPU141 14 70 M10140 1 65


kPM100 10 50 6.080 1 500

SUBStrAtE

SUBStrAtE

General FixinGs

INSTALLATION

INSTALLATION


SET CONTENTS:

expansion plug, countersunk head screw,

ball-shaped door stop.

DOOR STOPSBALL SHAPED

Product codeS2 L2

mm mm pcs. pcs.FIX-ODBK-01 8 40 white 15 180FIX-ODBK-02 8 40 beige 15 180FIX-ODBK-03 8 40 brown 15 180FIX-ODBK-04 8 40 black 15 180FIX-ODBK-05 8 40 gray 15 180

SUBSTRATE

STEEL PLUGS FOR AERATED CONCRETE

Product codemm mm mm mm pcs. pcs.

KGS-0530 5.0 30 4.5 min. 30 200 2400KGS-0632 6.0 32 4.5-5.0 min. 32 200 2400KGS-0838 8.0 38 5.0-6.0 min. 38 200 1200KGS-0860 8.0 60 5.0-6.0 min. 60 200 1200KGS-1060 10.0 60 6.0-8.0 min. 60 100 1200

SUBSTRATE

INSTALLATION

INSTALLATION


FrAME FiXing

FF1

longitudinal ribs facilitate easy insertion into hole and prevent rotation

2

2 long wings to stabilise plug while inserting screw, especially in hollow material

3

2 rows of spring wings expand to keep plug in required position

axially located expansion slots in mid length of plug to allow an even distribution of forces and to increase load carrying capacity

4

easy opening of fi nal expansion zone is achieved by the undercut and curved expansion slots reducing the required torque

expansion in 4 directions in 4 base materials according to EtAg (A, B, C, d).

5

6

two zones of threadhigher thread and lesser core diameter in fi rst zone to facilitate initial installation

bigger diameter of core in second zone, boosts expan-sion in centre zone of plug

1

screW Features:carbon steel, hardened, zinc electroplated, Cr 3+

two types of screw head countersunk, tOrX 40, provides ush fi nish in fi xture hex ange head, tOrX 40, install using hex socket or tOrX drive

pluG Features:two types: countersunk for ush fi xing of soft material like wood & wide ange for solid fi xing of hard material like steel

profi led internal geometry, designed to fi t both types of screw heads

for 4 base material types according to EtAg 020 specially formulated Ultramid

equal embedment depth for all base materials, 70 mm

embedment depth mark

multi axis expansion

FraMe FixinGs


FraMe FixinGs

FF1 FRAME FIXING

FF1 FRAME FIXING

with COAChSCrEw

with COUntErSUnk hEAd SCrEw

Product codePolypropylen

Product codenylon grey

Product codenylon blue mm mm pcs.

r-FF1-10k080 r-FF1-n-10k080/g r-FF1-n-10k080 1080 789 torX40/M13 50r-FF1-10k100 r-FF1-n-10k100/g r-FF1-n-10k100 10100 7109 torX40/M13 25r-FF1-10k120 r-FF1-n-10k120/g r-FF1-n-10k120 10120 7129 torX40/M13 25r-FF1-10k140 r-FF1-n-10k140/g r-FF1-n-10k140 10140 7149 torX40/M13 25r-FF1-10k160 r-FF1-n-10k160/g r-FF1-n-10k160 10160 7169 torX40/M13 25r-FF1-10k200* r-FF1-n-10k200/g* r-FF1-n-10k200* 10200 7209 torX40/M13 25r-FF1-10k240* r-FF1-n-10k240/g* r-FF1-n-10k240* 10240 7249 torX40/M13 25r-FF1-10k300* r-FF1-n-10k300/g* r-FF1-n-10k300* 10300 7309 torX40/M13 25

Product codePolypropylen

Product codenylon grey

Product codenylon blue mm mm pcs.

r-FF1-10l080 r-FF1-n-10l080/g r-FF1-n-10l080 1080 789 torX40 50r-FF1-10l100 r-FF1-n-10l100/g r-FF1-n-10l100 10100 7109 torX40 25r-FF1-10l120 r-FF1-n-10l120/g r-FF1-n-10l120 10120 7129 torX40 25r-FF1-10l140 r-FF1-n-10l140/g r-FF1-n-10l140 10140 7149 torX40 25r-FF1-10l160 r-FF1-n-10l160/g r-FF1-n-10l160 10160 7169 torX40 25r-FF1-10l200* r-FF1-n-10l200/g* r-FF1-n-10l200* 10200 7209 torX40 25r-FF1-10l240* r-FF1-n-10l240/g* r-FF1-n-10l240* 10240 7249 torX40 25r-FF1-10l300* r-FF1-n-10l300/g* r-FF1-n-10l300* 10300 7309 torX40 25

SUBStrAtE

SUBStrAtE

FraMe FixinGsApprOvAlS

pEnding

* made to order

* made to order


FraMe FixinGs

Size Concrete C12/15 Concrete C20/25 Structural clay tile lightweight concrete hollow brickaerated concrete

Plug diameter d [mm] 10 10 10 10 10Hole diameter in substrate d0 [mm] 10 10 10 10 10Hole diameter in fixture dfix [mm] 11 11 11 11 11Minimum hole depth h0 [mm] 60 60 80 80 80Installation depth hnom [mm] 50 50 70 70 70Minimum substrate thickness hmin [mm] 100 100 100 100 100





Installation depth hnom [mm] 50 50 70 70 70Characteristic resistance nrk [kn] 10.00 11.00 1.20 0.60 1.50Design resistance nrd [kn] 5.00 5.50 0.60 0.30 0.75recommended loads nrec [kn] 3.57 3.93 0.43 0.21 0.54

forcmin [mm] 50 50 50 50 50smin [mm] 100 100 100 100 100


Installation depth hnom [mm] 50 50 70 70 70Characteristic resistance nrk [kg] 1000.0 1100.0 120.0 60.0 150.0Design resistance nrd [kg] 500.0 550.0 60.0 30.0 75.0recommended loads nrec [kg] 357.1 392.9 42.9 21.4 53.6

forcmin [mm] 50 50 50 50 50smin [mm] 100 100 100 100 100

INSTALLATION


TORX 40

PZ3/PZ4

KDS, KD, KDT FRAME FIXINGS


kDt-10080 1080 6.885 50 600kDt-10100 10100 6.8105 25 450kDt-10120 10120 6.8125 25 300kDt-10140 10140 6.8145 25 300kDt-10160 10160 6.8165 25 300kDt-10200 10200 6.8205 25 300


kDS-08100 8100 4.8105 50 600kDS-08120 8120 4.8125 50 600kDS-08140 8140 4.8145 50 600kDS-10080 1080 6.885 50 600kDS-10100 10100 6.8105 25 450kDS-10120 10120 6.8125 25 300kDS-10140 10140 6.8145 25 300kDS-10160 10160 6.8165 25 300kDS-10200 10200 6.8205 25 300kDS-10240 10240 6.8245 25 300


kD-10080 1080 6.885 50 600kD-10100 10100 6.8105 25 450kD-10120 10120 6.8125 25 300kD-10140 10140 6.8145 25 300kD-10160 10160 6.8165 25 300kD-10200 10200 6.8205 25 300kD-10240 10240 6.8245 25 300kD-16140 16140 12150 20 200kD-16160 16160 12170 20 200kD-16200 16200 12210 20 200kD-16240 16240 12250 20 200

Product codemm mm

kmm pcs. pcs.

kD-08100k 8100 5.0120 60* 50 600kD-08120k 8120 5.0140 60* 50 600kD-08140k 8140 5.0160 60* 50 600kD-10080k 1080 7.0100 60* 50 600kD-10100k 10100 7.0120 60* 25 300kD-10120k 10120 7.0140 60* 25 300kD-10140k 10140 7.0160 60* 25 300kD-10160k 10160 7.0180 60* 25 300kD-10200k 10200 7.0200 60* 25 300

SUBStrAtE

with lOng EXpAnSiOn zOnE

ApprOvAlS

FraMe FixinGs

DeSCrIPtIon:Fixing timber or metal window and door frames.

FeatUreS:Countersunk Pozi-head screw provided, suitable for use with screw caps.Durable PA6 grade nylon for extended fi xing life. tough nylon sleeve prevents frame distortion during tightening.anti-rotation lugs. Extended zig-zag design for enhanced expansion.

SUItable For USe In:Concrete,Stonebrickwork & blockwork

tyPICal aPPlICatIon: Quick, easy fixing of timber or metal

door and window frames. No marking out drill straight through

frame.

13/19

* made to order (no approval)

* made to order (no approval)


KDS KD, KDT

k min. embedment depthd plug diameterl plug lengthU max. fixture thickness

KD-...K

Size 8 10 16Plug diameter d [mm] 8 10 16Hole diameter in substrate d0 [mm] 8 10 16Hole diameter in fixture dfix [mm] 9 11 17Minimum hole depth h0 [mm] 70 70 100Installation depth hnom [mm] 60 60 90Minimum substrate thickness hmin [mm] 80 80 120




Size 8 10 16Installation depth hnom [mm] 60 60 90Hollow brICk 3.5 MPaCharacteristic resistance nrk [kn] 0.60 1.40 2.10Design resistance nrd [kn] 0.30 0.70 1.10recommended loads nrec [kn] 0.21 0.50 0.79PorotHerM 400Characteristic resistance nrk [kn] - 0.80 1.30Design resistance nrd [kn] - 0.40 0.70recommended loads nrec [kn] - 0.29 0.50aerateD ConCrete 500Characteristic resistance nrk [kn] 0.90 1.20 2.70Design resistance nrd [kn] 0.50 0.60 1.40recommended loads nrec [kn] 0.36 0.43 1.00

Size 8 10 16Installation depth hnom [mm] 60 60 90Hollow brICk 3.5 MPaCharacteristic resistance nrk [kg] 60.0 140.0 210.0Design resistance nrd [kg] 30.0 70.0 110.0recommended loads nrec [kg] 21.4 50.0 78.6PorotHerM 400Characteristic resistance nrk [kg] - 80.0 130.0Design resistance nrd [kg] - 40.0 70.0recommended loads nrec [kg] - 28.6 50.0aerateD ConCrete 600Characteristic resistance nrk [kg] 90.0 120.0 270.0Design resistance nrd [kg] 50.0 60.0 140.0recommended loads nrec [kg] 35.7 42.9 100.0

FraMe FixinGs

INSTALLATION


KKS-R, KKD, KKT FRAME FIXINGS

Product code mm

mm pcs. pcs.

kkD-10100 10100 6.8105 25 450kkD-10120 10120 6.8125 25 300kkD-10140 10140 6.8145 25 300kkD-10160 10160 6.8165 25 300

Product code mm

mm pcs. pcs.

kkt-10100 10100 6.8105 25 300kkt-10120 10120 6.8125 25 300kkt-10140 10140 6.8145 25 300kkt-10160 10160 6.8165 25 300

Product code mm

mm pcs. pcs.

kkS-08100 kkS-08100-r 8100 5.5105 PZ2 50 600kkS-08120 kkS-08120-r 8120 5.5125 PZ2 50 600kkS-10080 kkS-10080-r 1080 7.085 PZ4 50 600kkS-10100 kkS-10100-r 10100 7.0105 PZ4 25 450kkS-10120 kkS-10120-r 10120 7.0125 PZ4 25 300kkS-10140 kkS-10140-r 10140 7.0140 PZ4 25 300kkS-10160 kkS-10160-r 10160 7.0165 PZ4 25 300

KKS--R

KKS

with ShOrt EXpAnSiOn zOnE

ApprOvAlS

FraMe FixinGs

DeSCrIPtIon:Fixing timber or metal window and door frames.

FeatUreS:Countersunk Pozi-head screw provided, suitable for use with screw caps.Durable PA6 grade nylon for extended fixing life. tough nylon sleeve prevents frame distortion during tightening.anti-rotation lugs. Extended zig-zag design for enhanced expansion.

SUItable For USe In:Concrete, Stonebrickwork & blockwork

tyPICal aPPlICatIon: Quick, easy fixing of timber or metal

door and window frames. No marking out drill straight through

frame.

PZ2/PZ4

13

TORX 40

* made to order

* made to order

SUBStrAtE


Concrete Solid brick 7.5 MPa

Size 8 10 8 10Plug diameter d [mm] 8 10 8 10Hole diameter in substrate d0 [mm] 8 10 8 10Hole diameter in fixture dfix [mm] 9 11 9 11Minimum hole depth h0 [mm] 50 50 70 70Installation depth hnom [mm] 40 40 60 60Minimum substrate thickness hmin [mm] 80 80 80 80





Size 8 10 8 10Installation depth hnom [mm] 40 40 60 60Characteristic resistance nrk [kn] 1.20 2.00 0.80 1.70Design resistance nrd [kn] 0.60 1.00 0.40 0.90recommended loads nrec [kn] 0.43 0.71 0.29 0.64

forcmin [mm] 50 50 50 50smin [mm] 100 100 100 100


Size 8 10 8 10Installation depth hnom [mm] 40 40 60 60Characteristic resistance nrk [kg] 120.0 200.0 80.0 170.0Design resistance nrd [kg] 60.0 100.0 40.0 90.0recommended loads nrec [kg] 42.9 71.4 28.6 64.3


k min. embedment depthd plug diameterl plug lengthU max. fixture thickness

KKS KKDKKT

FraMe FixinGs

INSTALLATION


WHS

WHO

TORX 30

* no approval

* no approval

CONCRETE FRAME SCREWS

CONCRETE FRAME SCREWS

with CYlindEr hEAd, hArdEnEd, FOr wOOd

with COUntErSUnk hEAd, hArdEnEd, FOr pvC

TORX 30

HARDENED SCREWS

Product codemm pcs.

wHS-75052 7.552 100wHS-75072 7.572 100wHS-75092 7.592 100wHS-75112 7.5112 100wHS-75132 7.5132 100wHS-75152 7.5152 100wHS-75182 7.5182 100wHS-75202 7.5202 100wHS-75212 7.5212* 100

Product codemm pcs.

wHo-75052 7.552 100wHo-75072 7.572 100wHo-75092 7.592 100wHo-75112 7.5112 100wHo-75132 7.5132 100wHo-75152 7.5152 100wHo-75182 7.5182 100wHo-75202 7.5202 100wHo-75212 7.5212* 100

SUBStrAtEpredrilled 6: no predrilling required:

ApprOvAlS

Size Concrete C20/25

Solid brick 7.5

MPa

Honeycomb clay brick

k3

aerated concrete

400Plug diameter d [mm] 7.5 7.5 7.5 7.5Hole diameter in substrate d0 [mm] 6 6 6 -Hole diameter in fi xture dfi x [mm] 8 8 8 8Minimum hole depth h0 [mm] 40 70 70 -Installation depth hnom [mm] 30 60 60 60Minimum substrate thickness hmin [mm] 60 90 90 90





Solid brick 7.5

MPa


k3

aerated concrete

400Installation depth hnom [mm] 30 60 60 60tenSIon loaDSCharacteristic resistance nrk [kn] 5.10 2.10 0.90 1.10Design resistance nrd [kn] 1.70 0.70 0.30 0.40recommended loads nrec [kn] 1.21 0.50 0.21 0.29


SHear loaDSCharacteristic resistance vrk [kn] 5.10 2.10 0.90 1.10Design resistance vrd [kn] 1.70 0.70 0.30 0.40recommended loads vrec [kn] 1.21 0.50 0.21 0.29


Solid brick 7.5

MPa


k3

aerated concrete

400Installation depth hnom [mm] 30 60 60 60tenSIon loaDSCharacteristic resistance nrk [kg] 510.0 210.0 90.0 110.0Design resistance nrd [kg] 170.0 70.0 30.0 40.0recommended loads nrec [kg] 121.4 50.0 21.4 28.6


SHear loaDSCharacteristic resistance vrk [kg] 510.0 210.0 90.0 110.0Design resistance vrd [kg] 170.0 70.0 30.0 40.0recommended loads vrec [kg] 121.4 50.0 21.4 28.6

FraMe FixinGs

INSTALLATION


PU ADHESIVE FOR FOAMED POLYSTYRENE

WIPES

PU FOAM CLEANER

PU FOAM GUN

PRIMERS

PU FOAM GUN

Product code Description

Sizel pcs.

rgU-01 Primer emulsion 1 480

rgU-05 Primer emulsion 5 123

rgU-05-g Deep penetrating primer emulsion 5 123

rgU-05-k Primer emulsion concentrate 5 123

Product codeCan size Content Effi ciency

DIn 4102ml ml m2 pcs. pcs.

rPP-FIX 1000 750 up to 8 b3 12 768

Product code DescriptionCan size Content

ml ml pcs. pcs.

rPC-0500 Cleaner for uncured PU foam 650 500 12 768

Product codepcs. pcs.

rPC-wIPeS 60 8

Product codepcs.

rPP-gUn 1

A* concrete;

B* solid brick.

k min. embedment depthd plug diameterl plug lengthU max. fi xture thickness

METAL FRAME ANCHORS

METAL FRAME ANCHORS MASKING CAP

Product codemm

Predrilled holemm

kmm

Umm

a* b* a* b* pcs.o-10072 1072 10 30 60 40 10 100o-10092 1092 10 30 60 60 30 100o-10112 10112 10 30 60 80 50 100o-10132 10132 10 30 60 100 70 100o-10152 10152 10 30 60 120 90 100o-10182 10182 10 30 60 150 120 100o-10202 10202 10 30 60 170 140 500

Product code Cap colourmm pcs. pcs.

ko-braZ brown 15 100 1000ko-bIaly white 15 100 1000

SUBStrAtE

ApprOvAlS

FraMe FixinGs


APPROVAL

PU GUN FOAMS

HANDHELD PU FOAMS

RPS-EKOMAXRPS-EKOMAX-W

RPP-EKOMAXRPP-EKOMAX-W

RPS-500RPS-500-W

RPPRPP-W

RPSRPS-W

RPP-65RPP-65-W

RPP-45RPP-45-W

RPS-PVC

RPS-PVC

APPROVAL

Product code Description Can sizemlContent

mlEffi ciency

lDIn 4102 pcs. pcs.

rPS-ekoMaX ekoMaX handheld PU Foam 1000 650 up to 40 b3 12 768rPS-ekoMaX-w ekoMaX handheld PU Foam winter 1000 650 up to 40 b3 12 768rPS-500 Handheld PU Foam 650 500 up to 30 b3 12 1152rPS-500-w Handheld PU Foam 650 500 up to 30 b3 12 1152rPS Handheld PU Foam winter 1000 750 up to 45 b3 12 768rPS-w Handheld PU Foam winter 1000 750 up to 45 b3 12 768rPS-PCv Handhels PU Foam for PvC 1000 750 up to 45 b3 12 768rPS-PCv-w Handhels PU Foam for PvC winter 1000 750 up to 45 b3 12 768

Product code Description Can sizemlContent

mlEffi ciency

lDIn 4102 pcs. pcs.

rPP-ekoMaX ekoMaX PU gun Foam 1000 720 up to 40 b3 12 768rPP-ekoMaX-w ekoMaX PU gun Foam winter 1000 720 up to 40 b3 12 768rPP PU gun Foam 1000 750 up to 42 b3 12 768rPP-w PU gun Foam winter 1000 750 up to 42 b3 12 768rPP-45 PU gun Foam 45l 1000 750 up to 45 b3 12 768rPP-45-w PU gun Foam 45l winter 1000 750 up to 45 b3 12 768rPP-65 PU gun Foam 65l 1000 840 up to 65 b3 12 768rPP-65-w PU gun Foam 65l winter 1000 840 up to 65 b3 12 768rPP-PCv PU gun Foam for PvC 1000 750 up to 45 b3 12 768rPP-PCv-w PU gun Foam for PvC winter 1000 750 up to 45 b3 12 768

RPP-45 RPP-65RPP

RPS-500 RPS

pu FoaMs

RPP-EKOMAX

RPS-EKOMAX

34

UNIVERSAL SILICONE

DISPENSERS

SANITARY SILICONE

CONSTRUCTION SILICONE

NEUTRAL SILICONE NO 11

ACRYL

GLASS WORK SILICONE

ROOF SEALANT

SILICONEhigh tEMpErAtUrE

SILICONE GLUEFOr MirrOrS

MN-79-011MN-79-012MN-79-012

Product codemm pcs. pcs.

Mn-79-011 9/23 12 24Mn-79-012 9/23 6 24

Product code Cap colourCan size

ml pcs. pcs.r-Sl-UnI-01 Clear 300 15 1260r-Sl-UnI-02 white 300 15 1260r-Sl-UnI-03 grey 300 15 1260r-Sl-UnI-04 brown 300 15 1260


ml pcs. pcs.r-Sl-San-01 Clear 300 15 1260r-Sl-San-02 white 300 15 1260r-Sl-San-03 grey 300 15 1260r-Sl-San-04 brown 300 15 1260r-Sl-San-07 black 300 15 1260


ml pcs. pcs.r-Sl-bUD-01 Clear 300 15 1260r-Sl-bUD-02 white 300 15 1260r-Sl-bUD-03 grey 300 15 1260r-Sl-bUD-04 brown 300 15 1260r-Sl-bUD-07 black 300 15 1260


ml pcs. pcs.r-Sl-neU-01 Clear 300 15 1260r-Sl-neU-02 white 300 15 1260r-Sl-neU-03 grey 300 15 1260r-Sl-neU-04 brown 300 15 1260r-Sl-neU-07 black 300 15 1260


ml pcs. pcs.r-Sl-Dek-01 Clear 300 15 1260r-Sl-Dek-02 white 300 15 1260r-Sl-Dek-04 brown 300 15 1260r-Sl-Dek-06 brick-red 300 15 1260r-Sl-Dek-08 graphite 300 15 1260


ml pcs. pcs.r-Sl-Skl-01 Clear 300 15 1260r-Sl-Skl-02 white 300 15 1260r-Sl-Skl-03 grey 300 15 1260r-Sl-Skl-04 brown 300 15 1260r-Sl-Skl-07 black 300 15 1260


ml pcs. pcs.r-Sl-tk-05 red 300 15 1260r-Sl-tk-07 black 300 15 1260


ml pcs. pcs.r-Sl-lUS-01 Clear 300 15 1260


ml pcs. pcs.r-Sl-Ma-02 white 310 15 1260

silicones

DRYWALL SCREWS, SCREWDRIVERS, COLLATED DRYWALL SCREWSDRYWALL SCREWS, SCREWDRIVERS, COLLATED DRYWALL SCREWS

Drywa

ll syst

ems fi

xings

Drywa

ll syst

ems fi

xings

Dr

yw

al

l

sy

st

em

s

fi

xi

ng

s

Dr

yw

al

l

sy

st

em

s

fi

xi

ng

s

D

r

y

w

a

l

l

s

y

s

t

e

m

s

f

i

x

i

n

g

s


FS and FT

FS

FT

drYWALL SCrEWS

DRYWALL SCREWS, COLLATED DRYWALL SCREWS DRYWALL SCREWS, COLLATED DRYWALL SCREWS

DESCRIPTION xing of plasterboard to supporting structures, steel pro les (FS type), timber laths (FT type)

MATERIALblack phosphate low carbon steel.

PROPERTIEScross-head pH2

MINMM

CM

MINMM

CM

MINMM

CM

S

MM

MMS

MM

MM

S

MM

MM

www.koelner.pl37

www.koelner.pl


FS-3525 3,525 1000 24000FS-3535 3,535 1000 12000FS-3545 3,545 500 6000FS-3555 3,555 500 6000FS-4270 4,270 250 3000FS-4890 4,890 250 3000FS-48100 4,8100 200 2400FS-48110 4,8110 200 2400FS-48120 4,8120 200 2400

FoR MeTAL FoR WooD


FT-3525 3,525 1000 24000FT-3535 3,535 1000 12000FT-3545 3,545 500 6000FT-3555 3,555 500 6000FT-4270 4,270 250 3000FT-4890 4,890 250 3000FT-48100 4,8100 200 2400FT-48110 4,8110 200 2400FT-48120 4,8120 200 2400


WS-3525 3,525 1000 18000WS-3535 3,535 1000 12000WS-3545 3,545 500 6000


WS-3595 3,59,5 1000 24000WS-3595-oC 3,59,5 1000 24000


WS-3911 3,911 1000 24000WS-3911-oC 3,911 1000 24000

Product code Pcs./stripmm pcs. pcs.

FSC-3525 3,525 50 1000 10000FSC-3535 3,535 50 1000 10000

Product code Pcs./stripmm pcs. pcs.

FTC-3525 3,525 50 1000 10000FTC-3535 3,535 50 1000 10000FTC-3545 3,545 50 1000 10000FTC-3550 3,550 50 1000 10000FTC-3555 3,555 50 1000 10000

DRYWALL SCREWS, COLLATED DRYWALL SCREWS

Black phosphate low carbon steel

Low-carbon electro zinc plated steel min. 6 m.

BuGLE HEAD DRYWALL SCREWS

COLLATED BuGLE HEAD DRYWALL SCREWS

PAN HEAD SELF DRILLING BuGLE HEAD SELF DRILLINGDRYWALL SCREWSDRYWALL SCREWS

SUBSTrATE

SUBSTrATE

SUBSTrATE SUBSTrATE

SUBSTrATE

SUBSTrATE

FoR MeTAL FoR WooD


Steel profile Timber Steel profile

Screw type FS- FT- WS-Screw diameter d [mm] 3.5 4.2 4.8 3.5 4.2 4.8 3.5 3.9Hole diameter in substrate d0 [mm] N/A N/A N/AInstallation depth hnom [mm] N/A 14.0 16.8 19.1 N/AMinimum substrate thickness hmin [mm] 0.5 28.0 34.0 38.0 0.75



FS-

Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kN] 0.70 0.75 0.80design resistance NRd [kN] 0.35 0.40 0.45Recommended loads Nrec [kN] 0.25 0.29 0.32PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kN] 0.57 0.55design resistance NRd [kN] 0.30 0.29Recommended loads Nrec [kN] 0.21 0.21

FT-

Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kN] 1.00 1.40 2.15design resistance NRd [kN] 0.30 0.45 0.52Recommended loads Nrec [kN] 0.21 0.32 0.37PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kN] 0.55 0.59 0.52design resistance NRd [kN] 0.17 0.18 0.16Recommended loads Nrec [kN] 0.12 0.13 0.11

WS-

Size 3.5 3.9PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kN] 1.15 1.15design resistance NRd [kN] 0.60 0.60Recommended loads Nrec [kN] 0.43 0.43SHeARINg beTWeeN TWo STeel SHeeTSCharacteristic resistance NRk [kN] 2.10 1.65design resistance NRd [kN] 1.15 0.90Recommended loads Nrec [kN] 0.82 0.64

FSWS-3911 WS-3595

WS

FT

DRYWALL SCREWS, COLLATED DRYWALL SCREWS DRYWALL SCREWS, COLLATED DRYWALL SCREWS

www.koelner.pl39

www.koelner.pl


FS-

Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kg] 70 75 80design resistance NRd [kg] 35 40 45Recommended loads Nrec [kg] 25 29 32PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kg] 57 55design resistance NRd [kg] 30 29Recommended loads Nrec [kg] 21 21

FT-

Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kg] 100 140 215design resistance NRd [kg] 30 45 52Recommended loads Nrec [kg] 21 32 37PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kg] 55 59 52design resistance NRd [kg] 17 18 16Recommended loads Nrec [kg] 12 13 11

WS-

Size 3.5 3.9PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kg] 115 115design resistance NRd [kg] 60 60Recommended loads Nrec [kg] 43 43SHeARINg beTWeeN TWo STeel SHeeTSCharacteristic resistance NRk [kg] 210 165design resistance NRd [kg] 115 90Recommended loads Nrec [kg] 82 64

DRYWALL SCREWS, COLLATED DRYWALL SCREWS


Expansion zone pro le along with new screw design aids central screw travel.

2

External pro le design opti-mizes grip in base material.

3

Larger ange and screw head diameter increases xture hold.

4

Thread lock design prevents pre-expansion during transit installation.

5

Internal Zig Zag expansion ridges in conjunction with tapered lead in provide maxi-mum expansion.

1

MATERIALPlug: percussion-resistant Copolymer polypropylene pp; high quality polyamide pA 6.0 (nylon).Nail: electro zinc plated steel ~10 m.

FXHAmmEr-IN pLUg

HAMMER-IN FIXINGS

www.koelner.pl41

www.koelner.pl

HAMMER-IN FIXINGS

CYLINdrICAL HEAd WITH STEEL NAIL

mUSHrOOm HEAd WITH STEEL NAILWITH mETrIC THrEAd HEAd CONNECTOr SCrEW

COUNTErSUNk HEAd WITH STEEL NAIL

Product code Nylon

Product code Polypropylene mm mm mm pcs. pcs.

FX-N-05C025 FX-05C025 5 25 PZ2 200 3600FX-N-05C030 FX-05C030 5 30 PZ2 200 3600FX-N-05C035 FX-05C035 5 35 PZ2 200 3600FX-N-05C040 FX-05C040 5 40 PZ2 200 3600FX-N-06C035 FX-06C035 6 35 PZ2 100 1800FX-N-06C040 FX-06C040 6 40 PZ2 200 1800FX-N-06C045 FX-06C045 6 45 PZ2 100 1800FX-N-06C060 FX-06C060 6 60 PZ2 100 1800FX-N-06C080 FX-06C080 6 80 PZ2 100 1800FX-N-08C045 FX-08C045 8 45 PZ2 100 1200FX-N-08C060 FX-08C060 8 60 PZ2 100 1200FX-N-08C080 FX-08C080 8 80 PZ2 50 600FX-N-08C100 FX-08C100 8 100 PZ2 50 600FX-N-08C120 FX-08C120 8 120 PZ2 50 600FX-N-08C140 FX-08C140 8 140 PZ2 50 600FX-N-08C160 FX-08C160 8 160 PZ2 50 600

Product code Nylon


FX-N-06k040 FX-06k040 6 40 PZ2 200 2400FX-N-06k045 FX-06k045 6 45 PZ2 100 1800FX-N-06k060 FX-06k060 6 60 PZ2 100 1200FX-N-06k080 FX-06k080 6 80 PZ2 100 1200

Product code Nylon


FX-N-05l025 FX-05l025 5 25 PZ2 200 3600FX-N-05l030 FX-05l030 5 30 PZ2 200 3600FX-N-05l035 FX-05l035 5 35 PZ2 200 3600FX-N-05l040 FX-05l040 5 40 PZ2 200 3600FX-N-05l050 FX-05l050 5 50 PZ2 200 2400FX-N-06l035 FX-06l035 6 35 PZ2 200 2400FX-N-06l040 FX-06l040 6 40 PZ2 200 2400FX-N-06l050 FX-06l050 6 50 PZ2 100 1800FX-N-06l060 FX-06l060 6 60 PZ2 100 1200FX-N-06l080 FX-06l080 6 80 PZ2 100 1200FX-N-08l045 FX-08l045 8 45 PZ2 100 1200FX-N-08l060 FX-08l060 8 60 PZ2 100 1200FX-N-08l080 FX-08l080 8 80 PZ2 50 600FX-N-08l100 FX-08l100 8 100 PZ2 50 600FX-N-08l120 FX-08l120 8 120 PZ2 50 600FX-N-08l140 FX-08l140 8 140 PZ2 50 600FX-N-08l160 FX-08l160 8 160 PZ2 50 600N-10l100 10l100 10 100 PZ3 25 300N-10l120 10l120 10 120 PZ3 25 300N-10l140 10l140 10 140 PZ3 25 300N-10l160 10l160 10 160 PZ3 25 300

Product code Nylon

Product code Polypropylene mm mm pcs. pcs.

FX-N-06l040-M6 FX-06l040-M6 6 40 100 1800

HAMMER-IN FIXINGSHAMMER-IN FIXINGS

HAMMER-IN FIXINGS HAMMER-IN FIXINGS

ApprOvALS

ApprOvALS ApprOvALS

ApprOvALS

Size 5 6 8Plug diameter d [mm] 5 6 8Hole diameter in substrate d0 [mm] 5 6 8Hole diameter in fi xture dfi x [mm] 6 7 9Minimum hole depth h0 [mm] 35 35 45Installation depth hnom [mm] 30 30 40Minimum substrate thickness hmin [mm] 55 55 65


SUBSTrATE

SUBSTrATE

SUBSTrATE

SUBSTrATE



Size 5 6 8Installation depth hnom [mm] 35 35 45CoNCReTe C20/25Characteristic resistance NRk [kN] 0.40 0.70 1.00design resistance NRd [kN] 0.20 0.35 0.50Recommended loads Nrec [kN] 0.14 0.25 0.36SolId bRICk 7.5 MPACharacteristic resistance NRk [kN] 0.40 0.60 0.70design resistance NRd [kN] 0.20 0.30 0.35Recommended loads Nrec [kN] 0.14 0.21 0.25AeRATed CoNCReTe 600Characteristic resistance NRk [kN] 0.30 0.45 0.50design resistance NRd [kN] 0.15 0.25 0.25Recommended loads Nrec [kN] 0.11 0.18 0.18

Size 5 6 8Installation depth hnom [mm] 35 35 45CoNCReTe C20/25Characteristic resistance NRk [kg] 40 70 100design resistance NRd [kg] 20 35 50Recommended loads Nrec [kg] 14 25 36SolId bRICk 7.5 MPACharacteristic resistance NRk [kg] 40 60 70design resistance NRd [kg] 20 30 35Recommended loads Nrec [kg] 14 21 25AeRATed CoNCReTe 600Characteristic resistance NRk [kg] 30 45 50design resistance NRd [kg] 15 25 25Recommended loads Nrec [kg] 11 18 18


kMW-05020 5 20 12 200 3600kMW-06030 6 30 12 100 1800kMW-06040 6 40 12 100 1200kMW-06050 6 50 12 100 1200kMW-06065 6 65 12 100 1200

HAMMER-IN FIXINGSZN-AL ALLOY WITH STEEL NAIL

ApprOvALS

Size 5 6Plug diameter d [mm] 5 6Hole diameter in substrate d0 [mm] 5 6Hole diameter in fixture dfix [mm] 6 7Minimum hole depth h0 [mm] 25 35Installation depth hnom [mm] 20 30Minimum substrate thickness hmin [mm] 40 50


kMW-06

Substrate Non-cracked concrete C20/25Solid brick

15 MPaInstallation depth hnom [mm] 30 30Characteristic resistance NRk [kN] 3.55 2.00design resistance NRd [kN] 1.40 0.80Recommended loads Nrec [kN] 1.00 0.57

forcmin [mm] 50 50smin [mm] 100 100

kMW-06

Substrate Non-cracked concrete C20/25Solid brick

15 MPaInstallation depth hnom [mm] 30 30Characteristic resistance NRk [kg] 355 200design resistance NRd [kg] 140 80Recommended loads Nrec [kg] 100 57

forcmin [mm] 50 50smin [mm] 100 100


HAMMER-IN FIXINGS

deSCRIPTIoN/:For light duty fixings of metal constructions and sheet metal to solid building materials

MATeRIAl:Plug sleeve: zamak (Zn-Al). Nail: steel electro-zinc coated ~10 m.

SuITAble FoR uSe IN:ConcreteMasonryetc.

TYPICAl APPlICATIoN: Profiled metal roof and wall cladding.

SUBSTrATE

INSTALLATION

www.koelner.pl43

www.koelner.pl

PLASTERBOARD FIXINGS


dRA-01PluS 14 22 100 1800dRA-02PluS 14 28 100 1800dRA-03PluS 14 32 100 1800


dRA-01 14 22 100 1800dRA-02 14 28 100 1800dRA-03 14 32 100 1800

DRA-01

DRA-01PLUS

DRA-03PLUSDRA-02PLUSDRA-02 DRA-03

PLASTERBOARD AND CAVITY FIXINGSHAMMER-IN FIXINGS


kWd-08l100 8 100 PZ2 50 600kWd-08l120 8 120 PZ2 50 600kWd-08l140 8 140 PZ2 50 600

LONg ExpANSION ZONE HAmmEr FIxINgS WITH COUNTErSUNk HEAd ANd STEEL NAIL

deSCRIPTIoN/:For fast, repetitive fixing with minimal screwdriver work.

MATeRIAl:Plug sleeve: impact resistant co-polymer of polypropylene PP or polyamide PA 6.0 (Nylon). Nail: steel electro-zinc coated ~10 m.

FeATuReS: Reinforced screwhead - facilitates high knock-in loads with the added benefit of plug neck grip.Hammer in drive screw for fast installation. deforming crumple zone allows quick adjust- ment in uneven surfaces.Extended expansion zone gives extra grip.

deSCRIPTIoN/:No drill required simply pierce paper skin and screw home. Can be used in single and double thickness plasterboard. Ideal for use with either a power or standard Pozi driv screwdriver.Must only be used with screws provided.

FeATuReS: Flange prevents accidental push through in plasterboard.Short length ideally suited for dry-lined walls.

SuITAble FoR uSe IN:Plasterboard

SuITAble FoR uSe IN:lightweight concrete Cellular brick Hollow bricketc.

TYPICAl APPlICATIoN: Fixing stud battens to walls before cladding.

Fixing long runs of shelf supports. Fixing skirting boards to walls.

TYPICAl APPlICATIoN: Securing wall and ceiling fittings, installing

hooks and brackets etc. Fixing electrical boxes, sanitary ware, cable

trunking etc. Installing shelving units and wooden bat-

tens.

SUBSTrATE

SUBSTrATE

INSTALLATION

INSTALLATION


METAL CAVITY FIXINGS


with slotted screwSM-04020 8 425 3-5 100 1800SM-04032 8 440 4-10 100 1800SM-04046 8 454 15-21 100 1800SM-04059 8 466 34-38 100 1800SM-05037 11 546 6-12 100 1800SM-05052 11 561 6-16 100 1800SM-05065 11 573 16-30 100 1200SM-06037 13 646 8-12 100 1200SM-06052 13 661 8-18 100 1200SM-06065 13 673 16-30 50 600SM-06080 13 690 32-45 50 600SM-08080 13 890 32-45 50 600with angle hookSM-04032k 8 M455 4-10 100 1800with round hookSM-04032S 8 M470 4-10 100 1800

SM SM-04032K SM-04032S

TOOLSMETAL CAVITY FIXINGS SETTING

Product codepcs.

AT-88M dIY 1AT-88-RAWl professional 1

DIY PRoFeSSIonAL

deSCRIPTIoN:Fixing heavy objects securely in a variety of board materials.Fixtures can be removed and re-fitted, eg when moving radiators for redecoration.Can be secured using slotted or Pozi driv screw-driver.

FeATuReS: Combination head screw supplied. Integral anti-rotation lugs. Hinged legs positioned to maximise load capacity. one piece stamping, with integral thread and flange for increased reliability.

SuITAble FoR uSe IN:PlasterboardHardboard & Plywood.

TYPICAl APPlICATIoN: Coat hooks to hollow doors. Shelves and bathroom accessories to

standard plasterboard. Radiators and kitchen cabinets to double

thickness and tiled plasterboard.

PLASTERBOARD AND CAVITY FIXINGS

SUBSTrATE

INSTALLATION

www.koelner.pl45

www.koelner.pl

deSCRIPTIoN:Medium duty plasterboard fixing.Fixtures can be removed and replaced for redecoration.

MATeRIAl:Plug sleeve: impact resistant co-polymer of polypropylene PP or polya-mide PA 6.0 (Nylon). Nail: steel electro-zinc coated ~10 m.

SuITAble FoR uSe IN:PlasterboardHardboardPlywood

TYPICAl APPlICATIoN: Securing bathroom and kitchen fittings. Installation of ceiling fixtures, such as light fittings. Fixing light shelving, brackets and hooks.

deSCRIPTIoN:Cavity fixing with long threaded screw, ideal for double thickness plaster-board and large fixtures.

FeATuReS:Machine screw for ease of tightening. Heavy gauge material for superior loads. Spreads load over wide area for extra load capacity. Heavy gauge nut to prevent stripping under load..

SuITAble FoR uSe IN:Plasterboardlathe and plasterPlywoodHardwood

TYPICAl APPlICATIoN: Installing overhead lights, ceiling fans and other fixtures.

CAVITY FIXINGS


08g 8 3,535 12,5 100 180010g 10 4,050 9,5 100 1800with countersunk cross-head screw PZ208gl 8 3,545 12,5 100 180010gl 10 4,060 9,5 100 1800with angle hook08gk 8 3,535 12,5 100 180010gk 10 4,050 9,5 100 1800

08G

08GL

08GK

10GL

10GK

10G

PLASTERBOARD AND CAVITY FIXINGS

SPRING TOGGLES


with pan head metric screwSPo450 14 450 50 900with eyeSPo475Z 14 475 50 900with round hookSPo475 14 475 50 900

SPo450 SPo475Z

SPo475

SUBSTrATE SUBSTrATE

INSTALLATION INSTALLATION



TMS-05 6 20 100 1800

BRASS ANCHOR WITH HOOk


SRS-06063 6 63 100 2400

CEILING WIRE HANGER


kTS-08050 8 40 50 600

SLEEVE ANCHOR WITH HOOkApprOvALS

deSCRIPTIoN/:Mainly for fi xing lightweight ceilings and sus-pended ceilings to solid building materials. Fire resistant

MATeRIAl:electro-zinc coated steel.


TYPICAl APPlICATIoN: lightweight suspended ceilings.

METAL HAMMER FIXINGS, HANGERS, CHANEL CONNECTORS

SUBSTrATE

SUBSTrATE

SUBSTrATE

INSTALLATION INSTALLATION

INSTALLATION

www.koelner.pl47

www.koelner.pl

METAL HAMMER FIXINGS, HANGERS, CHANEL CONNECTORS

Product codemm mm pcs.

Z-kSP 8 42 100

Product code mm mm pcs. pcs.gS-06040 6 40 100 1800gS-06065 6 65 100 1200

CEILING SPRING PIN

CEILING WEDGE ANCHOR

Product codemm pcs. kg

with eyeZ-l-0125-o 125 100 1,6Z-l-0250-o 250 100 2,8Z-l-0500-o 500 100 5,3Z-l-0750-o 750 100 7,8Z-l-1000-o 1000 100 10,0Z-l-1500-o 1500 100 15,3with hookZ-l-0125-H 125 100 1,6Z-l-0250-H 250 100 2,8Z-l-0500-H 500 100 5,3Z-l-0750-H 750 100 7,8Z-l-1000-H 1000 100 10,0Z-l-1500-H 1500 100 15,3

SuSPENDED WIRES

ANGLE SECTIONS

Product codepcs. kg

Z-Wd 100 1,23

DOuBLE SPRING SECuRING CLIP

FRAME FITTING SET


SZNP-08020 M820 50 1200

Product codepcs.

Z-kdP50 48Z-kdP75 48Z-kdP100 48

Product codepcs. kg

Z-ue30 100 3,85Z-ue65 100 5,46Z-ue90 100 6,40

FLEXIBLE DIRECT BRACkET

Product codepcs. kg

Z-eS-50/070 250 3,20Z-eS-50/120 250 4,70Z-eS-60/070 250 3,30Z-eS-60/120 250 4,80

uNIVERSAL DIRECT BRACkET

FOr dOOr FrAmE prOFILE INSTALLATION

deSCRIPTIoN:Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant.

MATeRIAl:steel 4.6 - electro-zinc coated ~10 m .



deSCRIPTIoN:Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant.

MATeRIAl:steel 4.6 - electro-zinc coated ~10 m .



ApprOvALS

INSTALLATION

INSTALLATION


CHANEL INTErSECTION CONNECTOr

Product codepcs. kg

Z-Wk 100 3,75

Product codepcs. kg

Z-Wkb 100 2,45

FLUSH TrANSvErSE CONNECTOr

Product codepcs. kg

Z-lPJ 100 5,20

Product codepcs. kg

Z-lW 100 4,50

Product codepcs. kg

Z-lkRZ 100 3,35

uNIVERSAL TIMBER CONNECTOR

CHANEL CONNECTOR


Z-WP170b 170 100 3,40

Product codel

mm pcs. kgZ-N-g0200 200 100 4,60Z-N-g0300 300 100 6,30

Product codepcs. kg

Z-N-WobR 100 4,90

Product codepcs. kg

Z-N-WT 100 3,80

Product codepcs. kg

Z-N-klM 100 0,61

HANgEr CLIp

TErmATEx HANgEr WITH AdjUSTABLE LENgTH

rOTArY CHANEL HANgEr WITH AdjUSTABLE LENgTH

* other lengths available

UppEr AdjUSTABLE LENgTH HANgEr

FASTENERS FOR SuSPENDED CEILINGS

CHANEL HANGER WITH SPRING CLIP

CHANEL HANGER WITH SPRING CLIP


Z-WkP170 170 100 3,10

DIRECT TIMBER CONNECTOR


Z-WP170 170 100 3,40Z-WP270 270 100 5,80

uNIVERSAL TIMBER CONNECTOR

CHANEL CONNECTORS, ANGLE SECTIONS

ROTARY CHANEL HANGERWITH SINgLE SprINg CLIp

WITH SprINg CLIpTERMATEX HANGER

Product codepcs. kg

Z-WobR 100 4,80

Product codepcs. kg

Z-ue30 100Z-ue65 100Z-ue90 100

www.koelner.pl49

www.koelner.pl

Product codecm pcs.

NAl-20 200 200NAl-25 250 200NAl-30 300 200

Product codecm pcs.

PC-53/25 250 10PC-83/25 250 10PC-103/25 250 10PC-123/25 250 10PC-153/25 250 10

Product code Widthmm cm pcs.

Nbo2-30 20 300 20Nbo3-30 30 300 20Nbo5-30 50 300 20

Product codecm pcs.

NAl-P-25 250 50

* box

* box

Product codecm pcs.

Ngk125-25 250 25 Product codecm pcs.

NAluk-30 300 50

Product codecm pcs.

NuNI-75 750 1

PVC PLASTERBOARD FINISHING BEAD

PVC CORNER ARCH BEAD

PVC TRuNKING BEAD

Product codecm pcs.

W6-25 250 25W6-30 300 25W10-25 250 25W10-30 300 25

PVC

* box

WET PLASTER BEAD

ALuMINIuM CORNER BEAD

PVC uNIVERSAL CORNER BEAD ROLL

ALuMINIuM PLINTH BEAD

ALuMINIuM CORNER HALF-BEAD

PLASTER & DRY-WALL BEADS

Product codecm pcs.

NAlM-25 250 20NAlM-30 300 25NAlM-25/50 250 20NAlM-30/50 300 20

WET PLASTER STEEL CORNER

ALU

50

* box

* box

* box

* box; ** with seal

* box

* box

Product codeMesh hole

sizecm mm pcs.

NAPS-25 250 1010 20

Product codecm pcs.

NkAP-20 200 25NkAP-25 250 25 Product code

cm pcs.NdYl-20 200 25NdYl-25 250 25NdYl-N-20 200 25NdYl-N-25 250 25

NDYL

NDYL-N

Product codecm pcs.

NPAR-20 200 30

Product codecm pcs.

Nlok-14 140 25Nlok-16 160 25Nlok-24 240 25Nlok-25** 250 25

Product codecm pcs.

NAlS-25 250 20NAlS-30 300 20

Product codemm cm pcs.

Nlu6-14 6 140 60Nlu6-24 6 240 60Nlu9-24 9 240 60

1.2

23

PVC EXPANSION JOINT CONTROL LATH

PVC WINDOW SEALING BEAD

PVC uNDER SILL BEAD

DRIP CORNER BEAD

ALuMINIuM CORNER BEAD WITH mESH

WITH mESH

WITH mESH

WITH mESH

WITH mESH

INTErNAL

PVC CORNER BEADWITH mESH

PVC WINDOW SEALING BEAD

THERMAL INSuLATION BEADS

Product codem pcs.

gkT-P20 20 72gkT-P45 45 48gkT-P90 90 24

FIBrEgLASS jOINT TApE

Product codem pcs.

gkT-S25 25 40

ACOUSTIC FOAm TApE*

Product codemm pcs.

gkT-A30 330 8gkT-A50 350 8gkT-A70 370 5gkT-A95 395 4

* lenght 30 m

TAPES

SELF-AdHESIvE jOINT TApE

Facad

e the

rmal

insula

tion f

ixing

sFac

ade t

herm

al ins

ulatio

n fixi

ngs

Fa

ca

de

t

he

rm

al

i

ns

ul

at

io

n

fi

xi

ng

s

Fa

ca

de

t

he

rm

al

i

ns

ul

at

io

n

fi

xi

ng

s

F

a

c

a

d

e

t

h

e

rm

a

l

in

su

la

ti

o

n

f

ix

in

g

s

Fa

ca

de

th

er m

al

i ns

ul a

t io

n f

i xi n

gs

52

Facade Thermal InsulaTIon FIxIngs

www.koelner.plwww.koelner.pl

no moisture penetration or nail corrosion e ectPrecise design of the pivot overmoulding and ideally adjusted internal pro le of the pin guarantee tight-ness of connection after assembly.

2

excellent thermal insulat-ing propertieslong overmoulding of metal pivot prevents occur-rence of thermal bridges and limits heat loss below 0,002 W/m2K.

1

no e ect of glue bulging or breaking on the facade. increased sti ness of the plate and pin according to guidelines of the eTiCs system is the guarantee of successful utilization of each facade.

3

maTerIalplug sleeve: impact resistant copolymer of polypropylene PP,

nail pin: electro zinc plated pin,

head coating: Polyamid Pa 6.0 (nylon) reinforced with ber glass.

TFIX-8MinsUlaTion fiXing

short assembly timeThe smallest depth of anchoring: 25 mm cheaper product25 mm anchoring instead of standard depth 40 mm results in 10% saving on the product cost.

5

european standardDiameter 8 mm compliant with european standards higher economy of work and less interferences with the base.

6

8 mm

ring nailComplete immobilization of the connector after the assembly process reducing vibration and horizontal movements of anchoring.

4

www.koelner.pl53

www.koelner.pl


Product code Lmm mm pcs.KI-070 70 40 250KI-090 90 60 250KI-120 120 90 250KI-140 140 110 250KI-160 160 130 250KI-180 180 150 250KI-200 200 170 250KI-220 220 190 250

6010

25L

WITH HAMMER IN NYLON PINKI-10 INSULATION FIXINGS

6010

25L

APPROVAL

ETA-07/0291

INSULATION MATERIAL

SUBSTRATE

Substrate Concrete Solid brick 20 MPaFixing diameter d [mm] 10 10Hole diameter in substrate d0 [mm] 10 10Minimum hole depth h0 [mm] 35 35Installation depth hnom [mm] 25 25Minimum substrate thickness hmin [mm] 100 100


PERFORMANCE DATA IN [KN]

PERFORMANCE DATA IN [KG]

Size ConcreteC12/15ConcreteC16/20

Solid brick20MPa

Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kN] 0.50 0.60 0.50Design resistance NRd [kN] 0.25 0.30 0.25Recommended loads Nrec [kN] 0.18 0.21 0.18


Solid brick20MPa

Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kg] 50 60 50Design resistance NRd [kg] 25 30 25Recommended loads Nrec [kg] 18 21 18

MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: polyamide PA 6.0 (Nylon) reinforced with bre glass.

INSTALLATION RECOMMENDATIONS:drill diameter: 10 mmminimum embedment depth: ETA 25 mm

INSTALLATION

54



Product code Lmm mm pcs.KI-090M 90 60 250KI-120M 120 90 250KI-140M 140 110 250KI-160M 160 130 250KI-180M 180 150 250KI-200M 200 170 250KI-220M 220 190 250KI-260M 260 230 200

6010

25L

6010

25L

WITH HAMMER IN STEEL PINKI-10M INSULATION FIXINGS

INSULATION MATERIAL

SUBSTRATE

Substrate Concrete Solid brick 20 MPaFixing diameter d [mm] 10 10Hole diameter in substrate d0 [mm] 10 10Minimum hole depth h0 [mm] 35 35Installation depth hnom [mm] 25 25Minimum substrate thickness hmin [mm] 100 100





Solid brick20MPa

Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kN] 0.50 0.75 0.50Design resistance NRd [kN] 0.25 0.38 0.25Recommended loads Nrec [kN] 0.18 0.27 0.18


Solid brick20MPa

Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kg] 50 75 50Design resistance NRd [kg] 25 38 25Recommended loads Nrec [kg] 18 27 18

MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pin.


INSTALLATION

APPROVAL

ETA-07/0291AT-15-8091/2009

www.koelner.pl55

www.koelner.pl


Product code Lmm mm pcs.KI-120N 120 50 250KI-140N 140 70 250KI-160N 160 90 250KI-180N 180 110 250KI-200N 200 130 250KI-220N 220 150 250KI-260N 260 190 200KI-300N 300 230 200

60

L60

10 60

L60

10

60

L60

10

KI-10N LONG EXPANSION ZONE INSULATION FIXING

INSULATION MATERIAL

SUBSTRATE

SubstrateSolid brick

20MPa

Honeycomb clay brick12MPa

Lightweight concrete10MPa

Aerated concrete

500Fixing diameter d [mm] 10 10 10 10Hole diameter in substrate d0 [mm] 10 10 10 10Minimum hole depth h0 [mm] 70 70 70 70Installation depth hnom [mm] 60 60 60 60Min. substrate thickness hmin [mm] 100 100 100 100




SizeSolid brick

20MPa



Aerated concrete

500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kN] 0.90 0.40 0.30 0.90Design resistance NRd [kN] 0.45 0.20 0.15 0.45Recommended loads Nrec [kN] 0.32 0.14 0.11 0.32

SizeSolid brick

20MPa



Aerated concrete

500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kg] 90 40 30 90Design resistance NRd [kg] 45 20 15 45Recommended loads Nrec [kg] 32 14 11 32

WITH HAMMER IN STEEL PIN WITH PLASTIC COATED HEAD

MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pin.Head coating: polyamide PA 6.0 (Nylon) reinforced with ber glass.


INSTALLATION

APPROVAL

ETA-07/0221

56



SubstrateSolid brick

20MPa



Aerated concrete

500Fixing diameter d [mm] 10 10 10 10Hole diameter in substrate d0 [mm] 10 10 10 10Minimum hole depth h0 [mm] 70 70 70 70Installation depth hnom [mm] 60 60 60 60Min. substrate thickness hmin [mm] 100 100 100 100




SizeSolid brick

20MPa



Aerated concrete

500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kN] 1.20 0.40 0.30 0.75Design resistance NRd [kN] 0.60 0.20 0.15 0.38Recommended loads Nrec [kN] 0.43 0.14 0.11 0.27

SizeSolid brick

20MPa



Aerated concrete

500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kg] 120 40 30 75Design resistance NRd [kg] 60 20 15 38Recommended loads Nrec [kg] 43 14 11 27

KI-10NS LONG EXPANSION ZONE INSULATION FIXINGS

60

L60

10 60

L60

10

Product code Lmm mm pcs.KI-140NS 140 70 250KI-160NS 160 90 250KI-180NS 180 110 250KI-200NS 200 130 250KI-220NS 220 150 250KI-260NS 260 190 200KI-300NS 300 230 200

INSULATION MATERIAL

SUBSTRATE

WITH SCREW IN STEEL PIN WITH PLASTIC COATED HEAD

MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pinHead Coating: polyamide PA 6.0 (Nylon) reinforced with ber glass.


INSTALLATION

APPROVAL

ETA-07/0221

www.koelner.pl57

www.koelner.pl


Substrate ConcreteC12/15Solid brick

12 grade

Structural hollow clay tile

12 grade

Silicate brick

12 grade

Silicate hollow brick

12 grade

Solid lightweight concrete

DIN 18152

Hollow light-weight concrete

DIN 18151

Fixing diameter d [mm] 8 8 8 8 8 8 8Hole dia. in substrate d0 [mm] 8 8 8 8 8 8 8Minimum hole depth h0 [mm] 35 35 35 35 35 35 35Installation depth hnom [mm] 25 25 25 25 25 25 25Min. substrate thickness hmin [mm] 100 100 100 100 100 100 100




Substrate ConcreteC12/15Solid brick

12 grade


12 grade

Silicate brick

12 grade


12 grade


DIN 18152


DIN 18151

Installation depth hnom [mm] 25 25 25 25 25 25 25Characteristic resistance NRk [kN] 1.50 1.50 0.60 1.50 0.90 0.50 0.50Design resistance NRd [kN] 0.75 0.75 0.30 0.75 0.45 0.25 0.25Recommended loads Nrec [kN] 0.54 0.54 0.21 0.54 0.32 0.18 0.18

Size ConcreteC12/15Solid brick

12 grade


12 grade

Silicate brick

12 grade


12 grade


DIN 18152


DIN 18151

Installation depth hnom [mm] 25 25 25 25 25 25 25Characteristic resistance NRk [kg] 150 150 60 150 90 50 50Design resistance NRd [kg] 75 75 30 75 45 25 25Recommended loads Nrec [kg] 54 54 21 54 32 18 18

INSULATION MATERIAL

SUBSTRATE

WITH HAMMER IN STEEL PIN WITH PLASTIC COATED HEADTFIX-8M INSULATION FIXINGS

INSULATION MATERIAL

60

L

8

25

60

L

8

25

60

L

8

25

Product code Lmm mm pcs.TFIX-8M-095 95 60 200TFIX-8M-115 115 80 200TFIX-8M-135 135 100 200TFIX-8M-155 155 120 200TFIX-8M-175 175 140 200TFIX-8M-195 195 160 200TFIX-8M-215 215 180 100TFIX-8M-235 235 200 100TFIX-8M-255 255 220 100TFIX-8M-275 275 240 100TFIX-8M-295 295 260 100

MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pinHead Coating: polyamide PA 6.0 (Nylon) reinforced with ber glass.


INSTALLATION

APPROVAL

ETA-07/0336

58



Kwl InsulaTIon holdIng Flange

Product code mm pcs.

polyamide PA 6.0, reinforced with bre glassKWL-90 90 250KWL-110 110 200KWL-140 140 200impact resistant copolymer of polypropyleneKWL-90-PP 90 250KWL-140-PP 140 200

aPProval

eTa-07/0221eTa-07/0291eTa-07/0336insUlaTion

MaTerialsUBsTraTe

for all type of base material

KWL-140

KWL-110

KWL-90

MATERIAL:Polyamide PA 6.0 (nylon) reinforced with bre glass, impact resistant copolymer of polypropylene PP.

1

40 m

m

140

mm

Product code Lmm mm pcs.Insulation xings with hammer in nylon pinB-W-KI-090 90 60 100B-W-KI-120 120 90 100B-W-KI-140 140 110 100B-W-KI-160 160 130 100B-W-KI-180 180 150 100B-W-KI-200 200 170 100

in BagsFacade InsulaTIon FIxIngs

Product code Lmm mm pcs.Insulation xings with hammer in steel pinB-W-KI-090M 90 60 100B-W-KI-120M 120 90 100B-W-KI-140M 140 110 100B-W-KI-160M 160 130 100B-W-KI-180M 180 150 100B-W-KI-200M 200 170 100

aPProval

mm pcs.Insulation xings with hammer in steel pin

100100100

INSTALLATION

www.koelner.pl59

www.koelner.pl


WiTh MasKing CaPKc InsulaTIon Flange

Product code

KC 60 5.5 200

60

15

aPProval

aT-15-4627/2006

insUlaTion MaTerial

sUBsTraTe

applicable to: UC screws for wood WB screws for trapezoid sheet

Substrate Steel Timber Plywood OSB chipboard Timber Plywood OSB chipboardFixing type KC + WB UC-05 UC-06Fixing diameter d [mm] 4.8 5.0 5.0 5.0 6.0 6.0 6.0Hole diameter in substrate d0 [mm] N/A N/A N/A N/A N/A N/A N/AMinimum hole depth h0 [mm] N/A N/A N/A N/A N/A N/A N/AInstallation depth hnom [mm] N/A 20 20 18 25 20 18Minimum substrate thickness hmin [mm] 0.75 20 20 18 25 20 18Maximum substrate thickness hmax [mm] 2.5 - - - - - -




Substrate Steel Timber Plywood OSB chipboard Timber Plywood OSB chipboardFixing type KC + WB UC-05 UC-06Installation depth hnom [mm] 0,75 20 20 18 25 20 18Characteristic resistance NRk [kN] 0.90 0.70 0.70 0.70 0.80 0.80 0.80Design resistance NRd [kN] 0.45 0.35 0.35 0.35 0.40 0.40 0.40Recommended loads Nrec [kN] 0.32 0.25 0.25 0.25 0.29 0.29 0.29

Substrate Steel Timber Plywood OSB chipboard Timber Plywood OSB chipboardFixing type KC + WB UC-05 UC-06Installation depth hnom [mm] 0,75 20 20 18 25 20 18Characteristic resistance NRk [kN] 90 70 70 70 80 80 80Design resistance NRd [kN] 45 35 35 35 40 40 40Recommended loads Nrec [kN] 32 25 25 25 29 29 29

MATERIAL:Impact resistant copolymer of polypropylene PP.

INSTALLATION RECOMMENDATIONS:minimum embedment depth: timber 20 mm, steel 0.75 mm

KC + UC KC + WB

INSTALLATION

60



mKI FIre resIsTanT meTal InsulaTIon supporTs

Product codemm mm pcs.

MKI-090/8 90 30 250MKI-110/8 110 50 250MKI-140/8 140 80 250MKI-170/8 170 110 250MKI-200/8 200 140 250

aPProval

aT-15-8092/2009

insUlaTion MaTerial

sUBsTraTe MATERIAL:electro zinc plated steel, stainless steel (made to order).


Substrate ConcreteC20/25Solid brick 15 grade

Silicate brick

15 grade


600Fixing diameter d [mm] 8 8 8 8Hole diameter in substrate d0 [mm] 8 8 8 N/AMinimum hole depth h0 [mm] 60 60 60 N/AInstallation depth hnom [mm] 50 50 50 50Min. substrate thickness hmin [mm] 100 100 100 100


PERFORMANCE DATA IN [KN

Kötőelem , csavar, katalógus

Documents

kkt frame xings

kdt frame xings

fx hammer xings

ks universal expansion

ft bugle head drywall

plfs bugle head drywall

bigips cavity xings

sm metal cavity xings