• JSD-B7(JuniServoDriver-BLDC 7) is a compact motor driver with compact sized, prevision, high performance and high stability developed to allow the user easily control for BLDC motor. • JSD-B7 performs real time positioning/speed/acceleration profile operation by using ARM series MCU capable of high speed calculation. Independent positioning control is available without additional motion controller in upper level accordingly. • JSD-B7 supports serial communication control such as USB / RS-232 / RS485 / CAN as well as pulse input control used as industrial standard simultaneously. Such control extension is applicable in various fields like intelligent robot system as well as industrial system. • JSD-B7 provides the engineering service immediately applicable to the system including special field requested by the customer, various functions and complicated calculation method via specialized customizing service. Intelligent Smart BLDC motor Driver JSD-B7 PROFESSIONAL MOTOR DRIVER The best selection for the positioning control such as the precision positioning control that is based on the encoder with 12~48V wide voltage area, high output up to 30A at maximum and the acceleration/deceleration control that ensures stable operation. MULTI PURPOSE SYSTEMS As a motor driver suitable for industrial robot system and drive system, it applies to the case manufacturing process of the nation’s biggest smart phone manufacturer. The validation in high speed/precision robot system has been completed by using in Delta robot drive part of ROBOTRO. If a motor drive cannot process such positioning command information with high speed, high speed operation by precision movement route is not available. JSD-B7 can perform DSP data process with high speed by using ARM based Cortex-M4 MCU with built-in DSP and Floating calculation function, and provide S-Curve speed profile based positioning control. This could lead to perfect process of positioning command with high speed of main controller, and provide various status information so that assure the operation of Delta Robot. SMART DEVICE CAMERA ASSEMBLY LINE ROBOTRO holds a compact Delta robot used in Smart phone lens assembly line, and a motor driver can high speed/precision motion control by applying JSD-B7. As Delta robot is activated by straight line and circular interpolation in real time, it needs a motor driver that can operate promptly according to the command signal with high speed of the main controller. Especially to operate Delta robot precisely, correct Point to Point straight line/circular interpolation can be realized by processing the positioning command more than 1,000 times per second. Application case of Motor Driver Compact High Performance Motor Driver Servo Actuator Motion Controller Industrial Robot Humanoid Robot Vision System 401-1302-1, Bucheon Technopark 4 Danji, 655, Pyeongcheon-ro, Wonmi-gu, Bucheon-si, Gyeonggi-do, 14502, Korea | tel: 070-8224-4100 | fax: 070-8224-4103 e-mail: [email protected] WWW.ROBOTRO.COM
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
• JSD-B7(JuniServoDriver-BLDC 7) is a compact motor driver with compact sized,prevision, high performance and high stability developed to allow the user easilycontrol for BLDC motor.
• JSD-B7 performs real time positioning/speed/acceleration profile operation byusing ARM series MCU capable of high speed calculation. Independentpositioning control is available without additional motion controller in upperlevel accordingly.
• JSD-B7 supports serial communication control such as USB / RS-232 / RS485 /CAN as well as pulse input control used as industrial standard simultaneously.Such control extension is applicable in various fields like intelligent robot systemas well as industrial system.
• JSD-B7 provides the engineering service immediately applicable to the systemincluding special field requested by the customer, various functions andcomplicated calculation method via specialized customizing service.
Intelligent SmartBLDC motor DriverJSD-B7
서보엑추에이터 로봇모션컨트롤러 산업용로봇 휴마노이드로봇 비전시스템
PROFESSIONAL MOTOR DRIVERThe best selection for the positioning control suchas the precision positioning control that is basedon the encoder with 12~48V wide voltage area,high output up to 30A at maximum and theacceleration/deceleration control that ensuresstable operation.
MULTI PURPOSE SYSTEMSAs a motor driver suitable for industrial robotsystem and drive system, it applies to the casemanufacturing process of the nation’s biggestsmart phone manufacturer.The validation in high speed/precision robotsystem has been completed by using in Delta robotdrive part of ROBOTRO.
If a motor drive cannot process suchpositioning command information withhigh speed, high speed operation byprecision movement route is notavailable.
JSD-B7 can perform DSP data processwith high speed by using ARM basedCortex-M4 MCU with built-in DSP andFloating calculation function, andprovide S-Curve speed profile basedpositioning control. This could lead toperfect process of positioningcommand with high speed of maincontroller, and provide various statusinformation so that assure theoperation of Delta Robot.
SMART DEVICE CAMERA ASSEMBLY LINEROBOTRO holds a compact Delta robot used in Smart phone lens assemblyline, and a motor driver can high speed/precision motion control byapplying JSD-B7.
As Delta robot is activated by straightline and circular interpolation in realtime, it needs a motor driver that canoperate promptly according to thecommand signal with high speed of themain controller.
Especially to operate Delta robotprecisely, correct Point to Pointstraight line/circular interpolation canbe realized by processing thepositioning command more than 1,000times per second.
Application case of Motor Driver
Compact High Performance Motor Driver
Servo Actuator Motion Controller Industrial Robot Humanoid Robot Vision System
401-1302-1, Bucheon Technopark 4 Danji, 655, Pyeongcheon-ro, Wonmi-gu, Bucheon-si, Gyeonggi-do, 14502, Korea| tel: 070-8224-4100 | fax: 070-8224-4103
e-mail: [email protected]
WWW.ROBOTRO.COM
JSD-B7(JuniServoDriver-BLDC 7)
Intelligent Motor Driver
Various operation mode
Speed based acceleration/ deceleration positioning control
High speed communications motor
Various BLDC motor response BLDC motor 1ch drive in 400W at maximum. Applicable to Sensored BLDC(Hall Sensor type, Hall Sensor + Encoder type) and Sensorless BLDC.
Industrial system interlocking
Multi motor simultaneous control
Various control protocol
I/O port support
Support positioning control mode suitable for industrial Robot, speed control mode forconstant/acceleration/deceleration rotation and torque control mode by correct currentcontrol.
Simultaneous control by connecting a motor up to 120 units at maximum with DaisyChain. Provide multi communication protocol for multi motor control.Positioning command up to 2,000 times at maximum per second by using RS-485(8M bps atmaximum), CAN ( 1M BPS at maximum) Serial communication.Support the operation by Pulse + CW/CCW mainly used in industrial system. Output themotor location with Pulse(including dividing function). Applicable without change of existingindustrial system
Provide the I/O port of 8 / 8 for external contact point I/O. Re-definition of the system I/Osuch as Emergency Stop, Home Position, Ready, Run and Stop as well as the user I/O
Allow full positioning control based on the speed, which can change the positioning, thespeed, and acceleration/deceleration. Implement S-Curve Profile smooth motion viaacceleration/deceleration control
Provide various control protocol that can directly control a motor via serial communication
MOTOR ON THE GOApplicable without significant change from existing system by adding various industrial functions needed in automation system such as the inspection, assembly and logistics.Optimal in intelligent field like a humanoid robot by supporting various smart motion drive functions applicable to intelligent robot system
HALLSENSOR
MotorEncoder
I/O
Power
MotorUVW
FunctionPC USB
PCRS-232
CANRS-485
PULSEIN/OUT
Input Voltage 12/ 24 / 48 (VDC)
Output Current Max 30 (A)
Rotation Speed 1~18000 (RPM)
Control Mode Positioning control, speed control, torque control
Acel/decelerationControl
S-Curve control(changeable positioning, speed, acceleration/deceleration while operating)
Motor Signal Hall Sensor independent, Hall Sensor + Encoder
Positioningcommand type
Pulse type : code + pulseCW + CCW pulse Communications type : RS-232, RS-485, CAN, USBInternal storage type : move to internal stored positioning via external input
ProtectionFunction
Overvoltage, Overcurrent, Overspeed, Overheat, Positioning tracking order, Hall sensor / Encoder failure
Status display Power LED, Alarm LED, Servo ON LED
External input Servo On, P-OT, N-OT, Emergency Stop, Alarm Reset, Home Position, Home Sensor (input function changeable)
External output Ready, Busy, In-Position, Alarm, User Output
PositioningCommand I/O
Positioning command pulse input (code+ pulse / 2 phase pulse )Present positioning pulse output (code + pulse / CW + CCW pulse)
Origin identification Sensor input type / torque measurement type(origin sensor is not required)Operating
environmentAmbient temperature 0°C ~ 50°C
Specification Dimensions
Servo Actuator Motion Controller Industrial Robot Humanoid Robot Vision System
401-1302-1, Bucheon Technopark 4 Danji, 655, Pyeongcheon-ro, Wonmi-gu, Bucheon-si, Gyeonggi-do, 14502, Korea| tel: 070-8224-4100 | fax: 070-8224-4103
e-mail: [email protected]
WWW.ROBOTRO.COM
Related Documents
