Integration Procedure Flow IP o ETH

Interface integration (1/2) (IP over ETH)Enable/Interrogate IP forwarding for ICSU and NPGEZQRT ZQRH

Interrogate/Create VLAN for every IFGE in NPGE(P)ZQRM ZQRE

Interrogate/Define IFGE NPGE(P) IP address (if IFGE in VLAN define VLAN IP address)ZQRN ZQRI

Interrogate/Create QoS profile ZQ8LZQ8B

SIGNALLINGUSER DATA O&M

?

Interrogate/Add IP based route identifier (IUPS, IUCS, IUB)ZQRU ZQRL

MTP SERVICES

OWN SPC

ZNPC

ZNRP

ZNPI

ZNRI

Interrogate/Create internal ICSU loopback IP address for SCTP Multi-Homing

Interrogate/Define internal ICSU interface AAx IP address towards IFGE NPGE(P)

ZQRN

ZQRN

ZQRI

ZQRI

Interrogate/Create internal IFAI NPGE(P) interface IP address towards AAx ICSU

Interrogate/Create static route IFAI/IFGE NPGE(P) -> MSS/SGSN via Gateway (Cisco Router)

Define QoS profile for Eth interfaceZQ8S

ZQRN ZQRI

ZQKBZQKC

Interrogate/Create static route ICSU -> MSS/SGSN via gateway (IFAI/IFGE NPGE(P)) ZQKBZQKC

Interrogate/Define internal IPoATM interfaces (IFAIx/IFGEx/AAx/LOx)ZQMC ZQMQ

SIGNALLING USER DATA

O&M

Interrogate/Create logical interface for subnet whose is responsible for SIG

on IUB (AA and IFAI addressing instead using the procedure above)

ZQMN

Interrogate/Create static route from ICSU to IFAI of NPGEPZQKC ZQKB

Iub

only Iu

ZQML

Iu

Interface integration (2/2) (IP over ETH)

Interrogate/Create IP signalling link set

Interrogate/Create signalling route set

Interrogate/Allow activation and activate signalling link state

Interrogate/Allow activation and activate signalling route set

Interrogate/Define local & remote subsystem

Interrogate/Activate local & remote SCCP

Interrogate/Activate local & remote subsystem

BROADCASTING

ZNSP

ZNRC

ZNFD

ZNGC

ZNHC

ZOBM; ZOBC

ZNSI

ZNRI

ZNLI

ZNVI

ZNFI; ZNFJ

ZNGI

ZNHI

ZOBI; ZOBL

ZNLA & ZNLC

Interrogate/Create association set

Interrogate/Add association in ass set

Interrogate/Configure source IP address for SCTP

ZOYC

ZOYA

ZOYN

ZOYI

ZOYL

ZOYI

Interrogate/Manage Association IP addressZOYP ZOY

Interrogate/Modify Association stateZOYS ZOY

ZNVA & ZNVC

Interrogate/Configure IP based route networkZQRC ZQRL

Interrogate/Create a static route from

NPGE(P) IFGE to IUB UP&CP with GATEWAY

(Cisco Router) for CP&UP

ZQKC ZQKB

Interrogate/Create a static route from

NPGE(P) IFGE to BTS TRS with GATEWAY (Cisco

Router) for ToP

ZQKC ZQKB

Create object IUPS/ IUCS (AL) (insert the

IU-PS/IU-CS UP IP address)

Create IPNB, WBTS, FMCS, WCEL object

Create IPQM object for Diffserve DSCP

selection

Define RNC object(i.e. RNC id : 26name : RNC26)

Iub:

MM

L co

mm

ands

IP address for OMU AAx Interface

Interrogate/Create a static route from OMU AAx to WTBS IP Address via gateway

(IFAI0 of NPGEP)•IF IS USED ESA24 the command will be used for specifing the SITE ROUTER and

ROUTING DESTINATION

ZQRN

ZQKC

ZQRI

ZQKB

Iu:

APPL

ICAT

ION

LA

UN

CHER

SIGNALLING USER DATAO&M

Application Launcher

•Start Application Launcher– NE: OMS IP address– Login: Nemuadmin– Password: nemuuser

•Start RNC Object Browser

Object Browser View

•Read/modify RNC object settings

•Read/modify WBTS object settings

•Read/modify HOPS object settings

•Read/modify FMC object settings

•Read/modify COCO object settings

RNC Object

•Set the RNC ID

•Set the RNC Name

RNC Object

•Configure digit analysis tree index for Iub and Iur interfaces

•Define A2EA (AAL type 2 Endpoint Address) for the RNC in AESA format

RNC Object (Handover and Power Control)

RNC Object (Admission Control)

RNC Object (Packet Scheduler)

Frequency Measurement Control (FMC) Object

•Set the FMC ID

•FMC is a logical object which includes a collection of parameters to control measurements for different types of handovers

– FMCS– FMCI– FMCG

Handover Path (HOP) Object

•HOP is a logical object, which includes a collection of parameters for controlling different types of handovers

– HOPS– HOPI– HOPG

•Set the HOP ID

WBTS Object

•Click to set defaults for all parameters

•Click to select view

•Click to add new WCELL

WBTS Object

•Define WBTS ID

•Set WBTS name

•Specify related COCO ID/CNBAP ID

•Select COCO ID or CNBAP link ID

WBTS Object

WCEL Object

•Define Local Cell Resource ID

•Define Cell ID

•Define LAC, SAC, RAC

•Select UTRA Absolute Frequency Channel number (UARFCN)

•Select Circuit and Packet Switched core networks

•Define primary DL scrabbling code•Select Cell range

•Select frame timing offset of a cell

WCEL Object

•Select UTRAN Registration Area ID

WCEL Object (Handover control)

•Select real time FMC ID

•Select non real time FMC ID

WCEL Object (Power Control)

WCEL Object (Load Control)

WCEL Object (Admission Control)

•Select WRAB object

WRAB Object

WCEL Object (Packet Scheduler)

IPQM Object

IPNB Object

TQM Object

IUCS (1/2)

IUCS (2/2)

IUPS (1/2)

IUPS (2/2)

IUB (IPNB)