Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2019-12-01 to 2019-12-31 Register issued on : 2020-01-03 A list of subsectors can be found at the end of this document.
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Register issued on : 2020-01-03
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector A : SERVICES
Register issued on : 2020-01-03
Page 3Subsector A11: SAFETY AND SECURITY
Subsector : A11 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t0133046/0001 Project Established
ICS : 65.145National Ref :Title : Firearms - Grooved and fluted rifles - For hanting, sport and competitionScope : This standard specifies rifles having groove and flute for hunting, sport and competittion .
Relatedness :National : New
Subsector : A11 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t1013506/0001 Project Established
ICS : 03.080.30, 53.100National Ref :Title : Workplaces - Heavy construction equipment rental service - General rules Scope : This standard includes the general for classification, structural characteristics, management
and technical equipment of rent a heavy construction
Relatedness :National : New
Subsector : A11 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : tst13871/0001 Project Established
ICS : 65.145National Ref :Title : Closed shooting range - For pistols - RequirementsScope : This standard specifies shooting range.
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2019-12-23Organization : UNICountry : Italy
Project ID : 01607123/0001 Project Established
ICS : 03.040National Ref : UNI1607123Title : Non-regulated professions- Forensics Expert- Knowledge, skill and competence
Page 4
requirementsScope : The normative activity aims to define the requirements related to the forensic expert’s
professional activity, with specific reference to the processes of technical-forensic investigation. These requirements will be specified in terms of knowledge, skills and competence in accordance with the European Qualifications Framework (EQF) and also includetheelementsfortheevaluationandvalidationoflearningoutcomes.
Relatedness :National : New
Subsector : A99 Registration Date : 2019-12-23Organization : UNICountry : Italy
Project ID : 01607124/0001 Project Established
ICS : 03.040National Ref : UNI1607124Title : Non-regulated professions - International Trade and Business Development Manager -
Knowledge,skillandcompetencerequirementsScope : The normative activity aims to define the requirements related to the International Trade
andBusinessDevelopmentManager’sprofessionalactivity.These requirements will be specified in terms of knowledge, skills and competence in accordance with the European Qualifications Framework – EQF and also include the elementsfortheevaluationandvalidationoflearningoutcomes.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 5
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2020-01-03
Page 6Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 00518781/0001 Project Established
ICS :National Ref : 00518781Title : Smoke and heat control systems - Part 9: Minimum values for natural smoke and heat
exhaust ventilators according to EN 12101-2, power supplies according to EN 12101-10 and control equipments according to ISO 21927-9
Relatedness :National : New
Subsector : B01 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 03101193/0001 Project Established
ICS :National Ref : 03101193Title : Solid couplings Storz System PN 16 for delivery and suction
Relatedness :National : New
Subsector : B01 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 03101216/0001 Project Established
ICS :National Ref : 03101216Title : Water systems for fire extinguishing - Filling and draining devices operated by remote
control - Part 2: For water extinguishing systems with empty and non-pressure pipework
Relatedness :National : New
Subsector : B01 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 03101219/0001 Project Established
ICS :National Ref : 03101219Title : Fire fighting vehicles - Part 8: Group pumping appliance LF 20 KatS for the disaster
prevention
Relatedness :National : New
Page 7** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027801/0001 Project Established
ICS : 91.010.30, 93.020National Ref : ÖNORM EN 1997-1/NATitle : Eurocode 7: Geotechnical design - Part 1: General rules (National Annex)Scope : The present National Annex defines the general rules of the geotechnical design which are
relevant in Austria.
Relatedness :National : New
Subsector : B02 Registration Date : 2019-12-16Organization : ISBIHCountry : Bosnia and Herzegovina
Project ID : 00082383/0001 Draft for public enquiry
ICS : 91.080.40National Ref : nsBAS EN 1992-1-2/NA:2019Title : Eurocode 2 - Design of concrete structures : Part 1-2: General rules - Structural fire
design - National annexScope : This document defines the value of national parameters or certain procedures for the
calculation with the standard BAS EN 1992-1-2:2017 and applied together with that standard.
Relatedness :National : New
Subsector : B02 Registration Date : 2019-12-16Organization : ISBIHCountry : Bosnia and Herzegovina
Project ID : 00089551/0001 Draft for public enquiry
ICS : 91.080.40National Ref : nsBAS EN 1992-2/NA:2019Title : Eurocode 2 - Design of concrete structures: - Part 2: - Concrete bridges - Design and
detalling rules - National annexScope : This document defines the value of national parameters or certain procedures for the
calculation with the standard BAS EN 1992-2:2017 and applied together with that standard.
Relatedness :National : New
Subsector : B02 Registration Date : 2019-12-16Organization : ISBIHCountry : Bosnia and Herzegovina
Project ID : 00089552/0001 Draft for public enquiry
ICS : 91.080.40
Page 8
National Ref : nsBAS EN 1992-3/NA:2019Title : Eurocode 2 - Actions on structures - Part 3: Liquid retaining and containment structures -
National AnnexScope : This document defines the value of national parameters or certain procedures for the
calculation with the standard BAS EN 1992-3:2017 and applied together with that standard.
Relatedness :National : New
Subsector : B02 Registration Date : 2019-12-16Organization : ISBIHCountry : Bosnia and Herzegovina
Project ID : 00092124/0001 Draft for public enquiry
ICS : 91.080.10National Ref : nsBAS EN 1993-2/NA:2019Title : Eurocode 3 - Design of steel structures - Part 2: Steel bridges - National AnnexScope : This document defines the value of national parameters or certain procedures for the
calculation with the standard BAS EN 1993-2:2018 and applied together with that standard.
Relatedness :National : New
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2019-12-16Organization : SIS Draft Issue Date : 2020-02-16Country : Sweden Latest Date for Comments : 2019-12-16Project ID : 00137003/0001 Not ActiveICS : 91.100.30National Ref : 137003Title : Concrete - Application of EN 206 in Sweden Scope : Thisstandard
—providessupplementarySwedishrequirements,adviceandrecommendations,wheresuchare required or permitted according to SS-EN 206 1, and also what is permitted according to SS-EN450-1,SS-EN12620andSS-EN13055-1;—providesinstructionsconcerningtheapplicationoftheinformativeannexesinSS-EN206:2013;—providesnon-contradictorysupplementaryinformationaimedatfacilitatingtheapplication of SS-EN 206:2013 in Sweden.
Relatedness :National : New
Subsector : B03 Registration Date : 2019-12-16Organization : SIS Draft Issue Date : 2020-02-16Country : Sweden Latest Date for Comments : 2019-12-16
Project ID : 00137243/0001 Project Established
ICS : 91.100.30National Ref : 137243Title : Concrete testing - Hardened concrete, shotcrete and plaster - Adhesion strength
Page 9
Scope : I denna standard beskrivs en metod for bestämning av vidhäftningshållfastheten in situ mellan två skikt, där ytskiktet utgörs av ett cementbundet material, eller annat material med huvudsakligenmineralisksammansättning.Metoden kan användas för bestämning av vidhäftningshållfastheten mellan ytskikt och underlagavtex-betong-betong-sprutbetong-berg-sprutbetong-betong-puts-olikaunderlagAntalet provningsområden, provkroppar och materialets ålder vid provning fastläggs inte i standarden utan får avgöras från fall till fall beroende på syftet med provningen.
Relatedness :National : New
** End of Subsector **
Subsector B10: TIMBER STRUCTURES
Subsector : B10 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 00518716/0001 Project Established
ICS :National Ref : 00518716Title : Production, execution and supervision of timber structures - Part 11: Structural
prefabricated wall, floor and roof elements
Relatedness :National : New
** End of Subsector **
Subsector B14: GEOTECHNICS
Subsector : B14 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027800/0001 Project Established
ICS : 13.080.99, 93.020National Ref : ÖNORM EN 16907-2/NATitle : Earthworks - Part 2: Classification of materials (National Annex)Scope : The present National Annex defines additional specifications for classification of materials of
earthworks.
Relatedness :National : New
Subsector : B14 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 00518780/0001 Project Established
Page 10
ICS :National Ref : 00518780Title : Concepts, abbreviations and symbols in geodesy - Part 6: Geodetic reference systems
and reference surfaces
Relatedness :National : New
** End of Subsector **
Subsector B19: CERAMIC TILES
Subsector : B19 Registration Date : 2019-12-09Organization : UNMZ Draft Issue Date : 2020-01-30Country : Czech Republic Latest Date for Comments : 2020-02-29
Project ID : 72003919/0001 Project Established
ICS :National Ref :Title : Ceramic floor and wall tiles - Determination of scratch hardness of surface according to
MohsScope : Theaimoftherevisionistoupdatethestandardforceramictiles
Relatedness :National : REV/AMDČSN725126(2007)
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2019-12-06Organization : NENCountry : Netherlands
Project ID : 50002145/0001 Project Established
ICS : 91.140.40National Ref : NPR 3378-5:2019 Concept nlTitle : Guidelines for gas installations - Section flue system - Part 50: Guidelines for the
evaluation of CLV-systems with overpressure under C(10) classification Scope : NPR 3378-5 applies to clauses 5.2, 5.7 and 5.8 of NEN 1078 and NEN 8078:2004.
Relatedness :National : New
Subsector : B25 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t0115929/0001 Project Established
ICS :23.060.01, 25.140.30, 91.140.40
National Ref :Title : Disassembly and assembly components of valvesScope : This standard covers disassembly and assembly components of valves
Page 11
Relatedness :National : New
Subsector : B25 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t1013317/0001 Project Established
ICS : 91.140.40National Ref :Title : Sample containers for crude petroleum, liquid fuels and mineral oils for storage and
transportation purposesScope : This standard covers sample containers for crude petroleum, liquid fuels and mineral oils for
storage and transportation purposes
Relatedness :National : New
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2020-12-30Organization : UNMS SRCountry : Slovakia
Project ID : 73913619/0001 Project Established
ICS : 93.080National Ref : STN 73 6114Title : Pavements of roads. Basic provisions for structural designScope : The standard will be used for the design of pavements od roads and traffic areas loaded by
nonrailway vehicles and by climatic actions. It settles common rules for the design of pavements of all types including their maintenance and repair. It will take into account the raise of loads and the climat change.
Relatedness :National : REV/AMD STN 73 6114: 1997
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t0134672/0001 Project Established
ICS : 91.100.60National Ref :Title : Self-supporting double skin metal faced insulating panels (sandwich panels) - Application
rulesScope : This standard specifies rules for designing, detailing, storing, handling, application, repair and
maintenance processes during use of roof, wall (façede), partition wall and cold room panels produced in accordance with TS EN 14509.
Page 12
Relatedness :National : New
** End of Subsector **
Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS
Subsector : B34 Registration Date : 2019-12-17Organization : SIS Draft Issue Date : 2020-12-17Country : Sweden Latest Date for Comments : 2020-02-17
Project ID : 00027100/0001 Project Established
ICS : 91.100.01National Ref : 27100Title : Construction products - Assessment of release of dangerous substances –Determination
of activity concentrations of radium-226, thorium-232 and potassium-40 in stone-based construction products for factory production control
Scope : This document specifies a method for determination of activity concentrations of radium-226, thorium-232 and potassium-40 using gamma-ray spectrometry with a Bismuth Germanate scintillation crystal detector. This document describes the calculation of radium index, activity index and gamma dose rate. It includes background subtraction, energy and efficiency calibration, analysis of the spectrum, calculation of the activity concentrations with the associated uncertainties, the decision threshold and detection limit, and reporting of the results. The method describes sample preparation and sample measurement. The preparation of the initial product sample is described in the product standards and is outside the scope of this document. The method is intended for factory production control. The method is applicable to samples from products consisting of stone-based construction products such as concrete and aggregates.
Relatedness :National : New
Subsector : B34 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 11904430/0001 Project Established
ICS :National Ref : 11904430Title : Pumping stations; design, construction and operation
Relatedness :National : New
Subsector : B34 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 11904431/0001 Project Established
ICS :National Ref : 11904431Title : Pumping stations; centrifugal pumps for operation with screen; directives for planning
Page 13
Relatedness :National : New
Subsector : B34 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 11904432/0001 Project Established
ICS :National Ref : 11904432Title : Pumping stations; centrifugal pumps for operation without screen; directives for planning
Relatedness :National : New
Subsector : B34 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 11904433/0001 Project Established
ICS :National Ref : 11904433Title : Pumping stations; archimedian screw pumps; directives for planning
Relatedness :National : New
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 00518709/0001 Project Established
ICS :National Ref : 00518709Title : Subsoil - Protecting structures against water in the ground - Part 1: Water influences and
Terms for drainage systems
Relatedness :National : New
Subsector : B99 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 04500747/0001 Project Established
ICS :National Ref : 04500747Title : Sealing of joints in concrete with compression seals
Page 14
Relatedness :National : New
Subsector : B99 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 11904413/0001 Project Established
ICS :National Ref : 11904413Title : Water engineering; terms; part 2: waterpower plants
Relatedness :National : New
Subsector : B99 Registration Date : 2019-12-13Organization : SNCountry : Norway
Project ID : NOT19018/0001 Project Established
ICS : 91.010.30National Ref : NS 3457-9Title : Classification of construction works — Part 9: Labeling of systems and components in
buildingsScope : This document standardize the labeling of components in buildings.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 15
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2020-01-03
Page 16Subsector C01: Food products
Subsector : C01 Registration Date : 2019-12-23Organization : UNICountry : Italy
Project ID : 01607280/0001 Project Established
ICS : 03.040, 67.020National Ref : UNI1607280Title : Non-regulatedprofessions
ProfessionalcookKnowledge,skillandcompetencerequirements
Scope : This standard defines the requirements related to the professional activity of the professionalcookworkinginfoodservices
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-04Organization : UNMZ Draft Issue Date : 2020-01-31Country : Czech Republic Latest Date for Comments : 2020-03-31
Project ID : 46001319/0001 Project Established
ICS : 67.060National Ref :Title : Food cereals - Part 8: Food maize for mill processingScope : This standard specifies the requirements for grain of maize, hard type and hard type up to
the intermediate type intended for the production of mill products.
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t0001466/0001 Project Established
ICS : 67.080.20National Ref :Title : Tomato Paste and pureeScope : This standard covers tomato paste and tomato puree.
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t1004216/0001 Project Established
ICS : 67.220.10National Ref :Title : Turmeric Ground
Page 17
Scope : This standard describes ground turmeric. Whole (unmilled) form of turmeric is not covered.
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t1013572/0001 Project Established
ICS : 67.250National Ref :Title : Particular requirements for the application of TS OIC/SMIIC 1 about halal food packaging
and packaging materialsScope : This standard covers the requirements for the Halal packaging and packaging materials.
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t2002282/0001 Project Established
ICS : 67.060National Ref :Title : TarhanaScope : This standard covers tarhana.
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t2003411/0001 Project Established
ICS : 67.080.10National Ref :Title : Seedless raisin Scope : This standard applies to seedless raisins. It does not apply other raisins which their seeds are
mechanically taken and also do not apply to blackberries.
Relatedness :National : New
Subsector : C01 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t4000353/0001 Project Established
ICS : 67.120.30
Page 18
National Ref :Title : Canned fishScope : This standard, covers canned fish. This standard does not specify salted, smoked and
deepfrozen fish.
Relatedness :National : New
** End of Subsector **
Subsector C04: LABORATORY GLASSWARE
Subsector : C04 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 05500177/0001 Project Established
ICS :National Ref : 05500177Title : Laboratory glassware - Liebig condenser
Relatedness :National : New
** End of Subsector **
Subsector C13: FERTILIZERS
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052651/0001 Draft for public enquiry
ICS :National Ref : PNE 142405-1Title : Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers.
Part 1: National inorganic fertilizers.Scope : This UNE standard specifies requirements for the labelling of Inorganic fertilizers with
primary nutrient elements according to Spanish Regulation.
Relatedness :National : REV/AMD UNE 142405-1:2010
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052652/0001 Draft for public enquiry
ICS :National Ref : PNE 142405-2Title : Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers.
Part 2: Organic fertilizers.Scope : This UNE standard specifies requirements for the labelling of organic fertilizers with primary
nutrient elements according to National Regulation.
Relatedness :
Page 19
National : REV/AMD UNE 142405-2:2010
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052653/0001 Draft for public enquiry
ICS :National Ref : PNE 142405-3Title : Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers.
Part 3: Organic-mineral fertilizers.Scope : This UNE standard specifies requirements for the labelling of organic-mineral fertilizers
according to National Regulation.
Relatedness :National : REV/AMD UNE 142405-3:2010
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052654/0001 Draft for public enquiry
ICS :National Ref : PNE 142405-4Title : Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers.
Part 4: Other fertilizers and special products.Scope : This UNE standard specifies requirements for the labelling of some special products and
fertilizers according to National Regulation.
Relatedness :National : REV/AMD UNE 142405-4:2010
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052655/0001 Draft for public enquiry
ICS :National Ref : PNE 142405-5Title : Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers.
Part 5: Liming materials.Scope : This UNE standard specifies the requirements for the labelling of liming materials according
to national regulations.
Relatedness :National : REV/AMD UNE 142405-5:2010
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052656/0001 Draft for public enquiry
Page 20
ICS :National Ref : PNE 142405-6Title : rtilizers products. Requirements for labelling of fertilizers different from CE fertilizers. Part
6: Organic soil improvers.Scope : This UNE standard specifies the labelling requirements for organics soil improvers according
to National Regulation.
Relatedness :National : REV/AMD UNE 142405-6:2010
Subsector : C13 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0052657/0001 Draft for public enquiry
ICS :National Ref : PNE 142405-7Title : Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers.
Part 7: Other soil improvers.Scope : This UNE standard specifies the requirements for the labelling of some specific soil
improvers according to national regulation.
Relatedness :National : REV/AMD UNE 142405-7:2010
** End of Subsector **
Subsector C17: TREES AND PLANTS
Subsector : C17 Registration Date : 2019-12-19Organization : ISMCountry : Moldova, Republic of Latest Date for Comments : 2020-02-18
Project ID : MD000209/0001 Draft for public enquiry
ICS : 65.020.20National Ref : SM 209Title : Nurserystock.Currantandgooseberryrootedcuttings.
TechnicalspecificationsScope : The purpose of this standard is to provide a common terminology for buyers and sellers. This
standard establishes common techniques for measuring currant and gooseberry plants, specifying and stating the size of plants.
Relatedness :National : New
Subsector : C17 Registration Date : 2019-12-19Organization : ISMCountry : Moldova, Republic of Latest Date for Comments : 2020-02-18
Project ID : MD000210/0001 Draft for public enquiry
ICS : 65.020.20National Ref : SM 210Title : Nurserystock.Raspberryrootedcuttings.
TechnicalspecificationsScope : The standard provides a common terminology for buyers and sellers. This standard
Page 21
establishes a common techniques for measuring raspberry plants, specifying and stating the size of plants
Relatedness :National : New
** End of Subsector **
Subsector C19: CHEMICAL ANALYSIS
Subsector : C19 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : tst02030/0002 Project Established
ICS : 73.080National Ref :Title : Determination of elastic module and poissons ratio of rocks in uniaxial compressionScope : his test method covers the determination of elastic moduli and poissons ratio of intact rock
core specimens in uniaxial compression.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 22
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2020-01-03
Page 23Subsector F05: MEASURING INSTRUMENTS
Subsector : F05 Registration Date : 2019-12-23Organization : UNICountry : Italy
Project ID : 01607121/0001 Project Established
ICS : 17.200.10, 91.140.10National Ref : UNI1607121Title : Guideline for technical-economic evaluation for the installation of heat metering and
thermoregulation systemsScope : Theguidelineprovides:
- a methodological analysis for the application of UNI EN 15459 to heat metering and thermoregulationsystemsforthelegislationpurpose;- reference values of the main economic indicators required in the economic feasibility analysis;- a reference methodology for estimating initial investment costs and annual costs, including operating costs, periodic or replacement costs (due to repair or replacement of components and systems), as well as for estimating the benefits from installing heat metering and thermoregulation systems.
Relatedness :National : New
Subsector : F05 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 03200857/0001 Project Established
ICS :National Ref : 03200857Title : DIN 3590-1 Gas shut-off valves and over pressure protection devices for pressure
measuring units - Part 1: Requirements and tests
Relatedness :National : New
Subsector : F05 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 03200858/0001 Project Established
ICS :National Ref : 03200858Title : DIN 3590-2 Gas shut-off valves and over pressure protection devices for pressure
measuring units - Part 2 Conformity assessment
Relatedness :National : New
** End of Subsector **
Subsector F07: DOCUMENTATION AND INFORMATION
Subsector : F07 Registration Date : 2019-12-13
Page 24
Organization : DINCountry : Germany
Project ID : 13203092/0001 Project Established
ICS :National Ref : 13203092Title : Ships and marine technology - Graphical symbols for technical documentation - Part 16:
Ventilation plants
Relatedness :National : New
Subsector : F07 Registration Date : 2019-12-19Organization : ISMCountry : Moldova, Republic of Latest Date for Comments : 2020-02-18
Project ID : MD000335/0001 Draft for public enquiry
ICS : 01.110National Ref : SM 335Title : The methodology of foods shelf life determination. Principles and methodsScope : This standard provides mechanisms for determining the shelf life of diferent products
groups. This standard is intended to help manufacturers and processors to determine the self-life of their products
Relatedness :National : New
Subsector : F07 Registration Date : 2019-12-19Organization : ISMCountry : Moldova, Republic of Latest Date for Comments : 2020-02-18
Project ID : MD000336/0001 Draft for public enquiry
ICS : 01.110National Ref : SM 336Title : Methodology for the development of technological instructions for food products.
Structure, editing and contentScope : This standard provides guidelines for the structure and drafting of documents intended to
become technological instructions
Relatedness :National : New
** End of Subsector **
Subsector F12: INFORMATION PROCESSING SYSTEMS
Subsector : F12 Registration Date : 2019-12-19Organization : SIS Draft Issue Date : 2019-12-18Country : Sweden Latest Date for Comments : 2020-02-18
Project ID : 00010700/0003 Project Established
ICS : 35.240.99National Ref : 10700Title : Education – Learning Opportunities Information – Metadata and Exchange Formats
Page 25
Scope : Denna standard specificerar krav vid utbyte av information om utbildningar i det svenska utbildningssystemet. Denna standard omfattar: beskrivning av innebörden hos informationens olika delar; klassdiagram som redogör för informationens struktur; villkor för när information är obligatorisk; regler för XML-kodning; jämförelse med tidigare utbytesformat (EMIL 1); jämförelse mot europeisk standard på området. Denna standard omfattar inte: värdeförråd; protokoll för datautbyte.
Relatedness :National : New
Subsector : F12 Registration Date : 2019-12-06Organization : NENCountry : Netherlands
Project ID : 50002147/0001 Project Established
ICS : 11.020, 35.240.80National Ref : NEN 7510-1:2017/A1:2019 Concept nlTitle : Health informatics - Information security management in healthcare - Part 1:
Management system Scope : This amendment contains substantive alterations of NEN 7510-1.
Relatedness :National : New
** End of Subsector **
Subsector F15: MATERIAL TESTING IN GENERAL
Subsector : F15 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235007/0001 Project Established
ICS :National Ref : 06235007Title : Classification of burning behaviour of upholstered compounds
Relatedness :National : New
Subsector : F15 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235604/0001 Project Established
ICS :National Ref : 06235604Title : Ellipsometry - Part 2: Model bulk material
Relatedness :National : New
** End of Subsector **
Page 26Subsector F19: OPTICS
Subsector : F19 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 02703217/0001 Project Established
ICS :National Ref : 02703217Title : Data sheet specification of fibre optic products - Part 3: Flexible image guides; Text in
German and English
Relatedness :National : New
Subsector : F19 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 02703218/0001 Project Established
ICS :National Ref : 02703218Title : Data sheet specification of fibre optic products - Part 5: Cold light sources; Text in
German and English
Relatedness :National : New
Subsector : F19 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 02703219/0001 Project Established
ICS :National Ref : 02703219Title : Data sheet specification of fibre optic products - Part 4: Fibre optic bundles; Text in
German and English
Relatedness :National : New
** End of Subsector **
Subsector F20: QUALITY ASSURANCE
Subsector : F20 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0051571/0001 Draft for public enquiry
ICS :National Ref : PNE 192002-2Title : Procedure for the regulatory inspection. Cranes. Part 2: Mobile cranesScope : To establish the requirements and set the criteria to be taken according to the performance
of periodic inspections of mobile cranes included in the field of application of Royal Degree
Page 27
837/2003 (ITC MIE AEM-4)
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 28
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2020-01-03
Page 29Subsector H04: SPORTS EQUIPMENT
Subsector : H04 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027796/0001 Project Established
ICS : 97.220.20National Ref : ÖNORM ISO 9523Title : Touring ski-boots for adults -- Interface with touring ski-bindings -- Requirements and test
methodsScope : This International Standard specifies the dimensions and characteristics of the interface,
requirements, test methods, and marking of ski-boots with a rigid sole which are used with current systems of touring ski-bindings with attachment at the boot toe and boot heel, the properreleasefunctionofwhichdependsonthedimensionsanddesignoftheinterfaces.For ski-binding systems that function irrespective of the sole shape or that have different requirements for the sole dimensions, it is not always necessary for the ski-boot soles to complywiththisInternationalStandardinordertoachievethedesireddegreeofsafety.This International Standard is applicable to ski-boots of sizes 15,0 and larger in the Mondopoint system. It is applicable to rigid touring boots. Boots with softer shells like Telemark boots are excluded as they do not have the necessary shell stability to act as part of the release systems.
Relatedness :National : New
Subsector : H04 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027798/0001 Project Established
ICS : 97.220.20National Ref : ÖNORM ISO 6005Title : Alpine skis - Ski binding screws - Test methods (ISO 6005:2019)Scope : This document specifies test methods for screws used for fastening ski bindings to alpine
skis.The results of these test methods characterize the properties of the binding screw.
Relatedness :National : New
Subsector : H04 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027799/0001 Project Established
ICS : 97.220.20National Ref : ÖNORM ISO 5355Title : Alpine ski-boots - Requirements and test methodsScope : This document specifies the requirements, test methods and marking of ski-boots which are
used with current systems of alpine ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces.For ski-binding systems that function irrespective of the sole shape or that have different
Page 30
requirements for the sole dimensions, it is not always necessary for the ski-boot soles to complywiththisdocumentinordertoachievethedesireddegreeofsafety.It applies to ski-boots of sizes 15,0 and larger [types A (for adults) and C (for children)] in the Mondopoint system
Relatedness :National : New
Subsector : H04 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027802/0001 Project Established
ICS : 97.220.20National Ref : ÖNORM ISO 9838Title : Alpine and touring ski-bindings -- Test soles for ski-binding testsScope : ThisInternationalStandarddefinestestsolesrepresenting
- an alpine ski-boot (form A) or at least the bottom part of it to be used for testing alpine ski-bindingsforalpineskiinginaccordancewithISO9462andISO9465,and- a touring ski-boot (form T) or at least the bottom part of it to be used for testing touring ski-bindingsfor touring skiing in accordance with ISO 13992 and ISO 9465.
Relatedness :National : New
** End of Subsector **
Subsector H25: LARGE GAS APPLIANCES
Subsector : H25 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 03200861/0001 Project Established
ICS :National Ref : 03200861Title : Gas-appliances; gas-burners for laboratory use (laboratory burners)
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 31
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2020-01-03
Page 32Subsector I06: PRESSURE VESSELS
Subsector : I06 Registration Date : 2019-12-19Organization : BSI Draft Issue Date : 2019-11-15Country : United Kingdom Latest Date for Comments : 2020-02-29
Project ID : 01903529/0001 Draft for public enquiry
ICS :National Ref : PD 5500:2018+A3:2020Title : Specificationforunfiredfusionweldedpressurevessels.
Amendment
Relatedness :National : New
** End of Subsector **
Subsector I09: SMALL TOOLS
Subsector : I09 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 12102754/0001 Project Established
ICS :National Ref : 12102754Title : Tabular layouts of properties - Part 87: End mills for indexable inserts
Relatedness :National : New
Subsector : I09 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 12102829/0001 Project Established
ICS :National Ref : 12102829Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part
87: End mills for indexable inserts
Relatedness :National : New
Subsector : I09 (Secondary Subsector)
Registration Date : 2019-12-24
Organization : TSECountry : Turkey
Project ID : t0134304/0001 Project Established
ICS : 83.140National Ref :Title : PVC Composite Plate with mineral additivesScope : This standard specifies requirements and test methods for PVC composite plate with mineral
additives
Page 33
Relatedness :National : New
** End of Subsector **
Subsector I18: MINING
Subsector : I18 Registration Date : 2019-12-19Organization : PKNCountry : Poland
Project ID : 27501182/0001 Project Established
ICS : 13.220.40, 73.020National Ref : prPN-G-04036PTitle : Explosion-proof protection of mines -- Protection before explosion of coal dust -- Notation
of intensity settlement of coal dustScope : This standard defines the principles of measuring the intensity of settling dust in
underground mine workings of mines and in rooms on the surface, directly related to the traffic in these mines
Relatedness :National : New
** End of Subsector **
Subsector I30: AIR DISTRIBUTION
Subsector : I30 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027794/0001 Project Established
ICS : 91.140.30National Ref : ÖNORM H 6039/ATitle : Ventilation and air conditioning plants - Controlled mechanical ventilation of classrooms,
training rooms or common rooms as well as of rooms for similar purposes - Requirements, dimensioning, design, operation and maintenance
Scope : This Austrian Standard covers the planning of ambient air demand, fire and noise protection and controlling as well as the construction, operation and service of controlled ventilation systems for group rooms including rooms for educational purposes (i. e. class rooms, instructions rooms, course rooms). Special tuition rooms (i. e. gym halls or apprenticeship workshops)arenotcoveredbythisAustrianstandard.This scope has not been amended, enlarged or limited compared to the latest version of ÖNORMH6039.Thefollowingwillbechanged:- an adaptation of the designations for filter classes according to ÖNORM EN ISO 16890-series will be carried out, and a so-called conversion table will be introduced which enables a comparisonbetween"old"and"new"filterclassdesignations.- the normative references will be updated especially regarding the latest version of the European directive on the energy efficiency of buildings. Consequential changes in regards to the content will also be incorporated.
Relatedness :National : New
** End of Subsector **
Page 34Subsector I31: VALVES
Subsector : I31 (Secondary Subsector)
Registration Date : 2019-12-24
Organization : TSECountry : Turkey
Project ID : t0115929/0001 Project Established
ICS :23.060.01, 25.140.30, 91.140.40
National Ref :Title : Disassembly and assembly components of valvesScope : This standard covers disassembly and assembly components of valves
Relatedness :National : New
** End of Subsector **
Subsector I99: UNDETERMINED
Subsector : I99 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06003991/0001 Project Established
ICS :National Ref : 06003991Title : Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1:
Dimensions, tolerances, mass
Relatedness :National : New
Subsector : I99 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06003992/0001 Project Established
ICS :National Ref : 06003992Title : Drive Type Fastenings without Taper Action, Parallel keys, Keyways - Deep Pattern for
Machine Tools - Part 2: Dimensions, Tolerances, Mass
Relatedness :National : New
Subsector : I99 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06003993/0001 Project Established
ICS :National Ref : 06003993Title : Drive Type Fastenings without Taper Action, Parallel Keys, Keyways - Low Pattern - Part
Page 35
3: Dimensions, Tolerances, Mass
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 36
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector M : METALLIC MATERIALS
Register issued on : 2020-01-03
Page 37Subsector M16: MECHANICAL TESTS FOR METALS
Subsector : M16 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235822/0001 Project Established
ICS :National Ref : 06235822Title : In-service inspections for primary coolant circuit components of light water reactors - Part
3: Hydrotest
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 38
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2020-01-03
Page 39Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2019-12-19Organization : BSICountry : United Kingdom
Project ID : 01903784/0001 Project Established
ICS :National Ref : BS 6380:2012+A2Title : Guidetolowtemperaturepropertiesandcoldweatheruseofdieselfuelsandgas
oils. Amendment
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235840/0001 Project Established
ICS :National Ref : 06235840Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235841/0001 Project Established
ICS :National Ref : 06235841Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235842/0001 Project Established
ICS :National Ref : 06235842Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Page 40
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235843/0001 Project Established
ICS :National Ref : 06235843Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235844/0001 Project Established
ICS :National Ref : 06235844Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235845/0001 Project Established
ICS :National Ref : 06235845Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 06235846/0001 Project Established
ICS :National Ref : 06235846Title : Designation of lubricants and marking of lubricant containers, equipment and lubricating
points
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-13
Page 41
Organization : DINCountry : Germany
Project ID : 06235847/0001 Project Established
ICS :National Ref : 06235847Title : folgt
Relatedness :National : New
Subsector : N03 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t0134304/0001 Project Established
ICS : 83.140National Ref :Title : PVC Composite Plate with mineral additivesScope : This standard specifies requirements and test methods for PVC composite plate with mineral
additives
Relatedness :National : New
** End of Subsector **
Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-01-19
Project ID : P0046098/0001 Draft for public enquiry
ICS :National Ref : PNE 40902Title : Safety of baby clothing. Physical and mechanical properties.Scope : This standard specifies the safety requirements for garments for babies and toddlers up to
36 months old and up to 98 cm tall, both inclusive, to avoid the risks related to the existence or generation of small parts and rigid elements cutting or piercing, and the corresponding testmethods.The purpose of this document doesn't allow to cover all potential risks which may result from a garment insecure.
Relatedness :National : REV/AMD UNE 40902:2008
Subsector : N05 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t0133035/0001 Project Established
ICS : 59.080.20National Ref :
Page 42
Title : Determination of elastic behavior of elastomerite and synthetic filaments under constant weight
Scope : This standard specifies a manual method for the determination of the elastic behavior of elastomerite and synthetic filaments under constant weight
Relatedness :National : New
** End of Subsector **
Subsector N06: RUBBER
Subsector : N06 Registration Date : 2019-12-19Organization : BSICountry : United Kingdom
Project ID : 01903733/0001 Project Established
ICS :National Ref : BS 903-A9Title : Physical testing of rubber. Determination of abrasion resistance
Relatedness :National : New
** End of Subsector **
Subsector N12: TIMBER PRODUCTS
Subsector : N12 Registration Date : 2019-12-18Organization : LVS Draft Issue Date : 2019-12-19Country : Latvia Latest Date for Comments : 2020-02-19
Project ID : 00058972/0001 Draft for public enquiry
ICS : 79.040National Ref : prLVS 82Title : Measurement of Round TimberScope : This standard defines basic principles which are to be followed drawing up round timber
measurementandvolumecalculationrules.This standard applies to rules of measurement for softwood and hardwood round timber (including pulpwood).
Relatedness :National : REV/AMD LVS 82:2003
** End of Subsector **
Subsector N13: LEATHER
Subsector : N13 Registration Date : 2019-12-24Organization : TSECountry : Turkey
Project ID : t1000225/0001 Project Established
ICS : 59.140.30National Ref :Title : Box-Calf and Rind-Box (Chrome Tanned Upper Leather)
Page 43
Scope : This standard specifies the description, classification and characteristics, sampling, inspection and marketing of Box-Calf and Rind-Box.
Relatedness :National : New
** End of Subsector **
Subsector N20: CERAMICS
Subsector : N20 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027795/0001 Project Established
ICS : 23.040.20National Ref : ÖNORM ISO 17455Title : Plastics piping systems - Multilayer pipes - Determination of the oxygen permeability of
the barrier pipeScope : This Standard specifies two test methods for determining the oxygen permeability of barrier
pipe:the dynamic (Method I) and the static (Method II). In principle, both methods give the same results. The method to be applied is not application-dependent, but can be specified in the referring standard.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 44
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2020-01-03
Page 45Subsector S06: VIBRATION & SHOCK
Subsector : S06 Registration Date : 2019-12-23Organization : ASICountry : Austria
Project ID : 00027797/0001 Project Established
ICS : 17.160National Ref : ÖNORM S 9001Title : Mechanical vibrations - shocks; principles and evaluation of vibration quantitiesScope : The purpose of this ÖNORM is to establish principles by which shocks can be measured and
their impact on people, structures and machinery can be assessed.
Relatedness :National : New
** End of Subsector **
Subsector S08: AIR QUALITY
Subsector : S08 Registration Date : 2019-12-19Organization : PKNCountry : Poland
Project ID : 15901579/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04527Title : Air purity protection -- Determination of arsenic and its inorganic compounds in
workplaces by atomic absorption spectrometry with graphite tubeScope : This standard gives a method for the determination of the content of arsenic (CAS:
7440-38-2) and its inorganic compounds in workplaces air by atomic absorption spectrometry with graphite tube. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of arsenic and its inorganic compounds as arsenic which can be determined by the method in the sampling and determination conditions specified is 0,0010 mg/m3 (for air volume 480 l)
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2019-12-19Organization : BSICountry : United Kingdom
Project ID : 01903922/0001 Project Established
ICS :National Ref : BS 8693Title : Watertreatmentforsmallvolumeclosedsystemsinresidential
dwellings(including apartments)
Relatedness :National : New
** End of Subsector **
Page 46Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS
Subsector : S19 Registration Date : 2019-12-11Organization : ISBIH Draft Issue Date : 2019-11-28Country : Bosnia and Herzegovina Latest Date for Comments : 2020-01-28
Project ID : 00093976/0001 Draft for public enquiry
ICS : 11.160National Ref : nsBAS 1044:2019Title : First-aid kit for motor vehiclesScope : This standard specifies the measures, material, content, test methods, acceptance criteria
and labeling first aid kit for motor vehicles. First aid kit (first aid material) should provide first aid to an injured person at the site of a traffic accident.
Relatedness :National : REV/AMD BAS 1044:2013
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2019-12-06Organization : NENCountry : Netherlands
Project ID : 50002144/0001 Project Established
ICS :13.030.01, 13.080.01, 77.040.30
National Ref : NTA 8191:2019 Concept nlTitle : Sampling and determination of metallic parts in incinerator bottom ash fractions and
incinerator non-ferrous concentrateScope : For the determination of the content of metallic particles in bottomash and the extracted
non-ferro concentrate of waste plants is not consistent. With the development of a standardized method, a consistent description of the determination of metallic components is stated.
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 (Secondary Subsector)
Registration Date : 2019-12-06
Organization : NENCountry : Netherlands
Project ID : 50002147/0001 Project Established
ICS : 11.020, 35.240.80National Ref : NEN 7510-1:2017/A1:2019 Concept nlTitle : Health informatics - Information security management in healthcare - Part 1:
Management system Scope : This amendment contains substantive alterations of NEN 7510-1.
Relatedness :National : New
Page 47
** End of Subsector **
** End of Sector **
Information procedure Page 48
Monthly Notifications Register
Notifications registered at CCMC from 2019-12-01 to 2019-12-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2020-01-03
Page 49Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 13116375/0001 Project Established
ICS :National Ref : 13116375Title : Aerospace series - Nuts, hexagon, with MJ thread, self-locking, corrosion-resisting steel,
class: 1 100 MPa/120 °C; Text in German and English
Relatedness :National : New
Subsector : T02 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 13116381/0001 Project Established
ICS :National Ref : 13116381Title : Aerospace series - Bihexagonal head bolts, close tolerance, with medium-length MJ
thread, corrosion resisting nickel alloy - Nominal tensile strength 1 550 MPa, for temperatures up to 315 °C
Relatedness :National : New
** End of Subsector **
Subsector T03: ROAD VEHICLES
Subsector : T03 Registration Date : 2019-12-19Organization : BSICountry : United Kingdom
Project ID : 01903785/0001 Project Established
ICS :National Ref : BS AU 242Title : Automotive windscreen repair. Code of practice
Relatedness :National : New
Subsector : T03 Registration Date : 2019-12-19Organization : BSICountry : United Kingdom
Project ID : 01903786/0001 Project Established
ICS :National Ref : BS AU 251Title : Specificationforperformanceofautomotivelaminatedwindscreenrepair
systems
Relatedness :
Page 50
National : New
** End of Subsector **
Subsector T13: LIFTING CHAINS, HOOKS AND ROPES
Subsector : T13 Registration Date : 2019-12-23Organization : UNICountry : Italy
Project ID : 01607263/0001 Project Established
ICS : 53.020.30National Ref : UNI1607263Title : Cranes and related accessories - Turnbuckles for general rigging, tensioning,
suspensions and lifting applicationsScope : This document specifies safety requirements including evaluation and testing methods for
turnbucklesandend fittings, designed for general rigging, tensioning, suspension and lifting applications. The materialsusedmaybelowormediumcarbonsteels.The shape of the body can be open or closed; the shape of the end fittings can be eye, jaw, hook,stub.Threads are metric or UNC. The surface finish can be self-colored, electrogalvanized or hot-dip galvanized.
Relatedness :National : New
Subsector : T13 Registration Date : 2019-12-13Organization : DINCountry : Germany
Project ID : 08500178/0001 Project Established
ICS :National Ref : 08500178Title : Round steel link chains - Round steel link chains for sling chains - Grade 10
Relatedness :National : New
** End of Subsector **
Subsector T18: ELEVATING PLATFORMS
Subsector : T18 Registration Date : 2019-12-11Organization : UNECountry : Spain Latest Date for Comments : 2020-12-30
Project ID : P0051274/0001 Draft for public enquiry
ICS :National Ref : PNE 58923Title : Mobile elevating work platforms (MEWP). Operator trainingScope : This Standard specifies the requirements and procedure for the training of Mobile Elevating
Work Platforms operator. It covers all the type Platforms included and manufactured
Page 51
Relatedness :National : REV/AMD UNE 58923:2014
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR