Top Banner

Click here to load reader

IMCA PERF.pdf

Jul 09, 2016

ReportDownload

Documents

  • LIANGULO DE LADOS IGUALES

    DIMENSIONES

    g g 1 g 2Espac.recom.

    kg/m mm mm mm mm mm mm in. mm

    19 x 3 3/4 x 1/8 0.88 11.1 3.2 11 - - 6.3 1/4 20x 5 x 3/16 1.25 12.7 3.2 11 - - 6.3 1/4 20

    22 x 3 7/8 x 1/8 1.04 11.1 3.2 12 - - 6.3 1/4 20x 5 x 3/16 1.49 12.7 3.2 12 - - 6.3 1/4 20

    25 x 3 1 x 1/8 1.19 11.1 3.2 14 - - 9.5 3/8 30x 5 x 3/16 1.73 12.7 3.2 14 - - 9.5 3/8 30x 6 x 1/4 2.22 14.3 3.2 14 - - 9.5 3/8 30

    32 x 3 1 1/4 x 1/8 1.50 11.1 4.7 18 - - 12.7 1/2 40x 5 x 3/16 2.20 12.7 4.7 18 - - 12.7 1/2 40x 6 x 1/4 2.86 14.3 4.7 18 - - 12.7 1/2 40

    38 x 3 1 1/2 x 1/8 1.83 11.1 4.7 20 - - 12.7 1/2 40x 5 x 3/16 2.68 12.7 4.7 20 - - 12.7 1/2 40x 6 x 1/4 3.48 14.3 4.7 20 - - 12.7 1/2 40x 8 x 5/16 4.26 15.9 4.7 20 - - 12.7 1/2 40x 10 x 3/8 4.99 17.5 4.7 20 - - 12.7 1/2 40

    44 x 3 1 3/4 x 1/8 2.14 11.1 6.3 25 - - 15.9 5/8 50x 5 x 3/16 3.15 12.7 6.3 25 - - 15.9 5/8 50x 6 x 1/4 4.12 14.3 6.3 25 - - 15.9 5/8 50x 8 x 5/16 5.04 15.9 6.3 25 - - 15.9 5/8 50

    51 x 3 2 x 1/8 2.46 11.1 6.3 30 - - 15.9 5/8 50x 5 x 3/16 3.63 12.7 6.3 30 - - 15.9 5/8 50x 6 x 1/4 4.75 14.3 6.3 30 - - 15.9 5/8 50x 8 x 5/16 5.83 15.9 6.3 30 - - 15.9 5/8 50x 10 x 3/8 6.99 17.5 6.3 30 - - 15.9 5/8 50

    64 x 4 2 1/2 x 5/32 3.83 11.1 6.3 35 - - 19 3/4 60x 5 x 3/16 4.61 12.7 6.3 35 - - 19 3/4 60x 6 x 1/4 6.10 14.3 6.3 35 - - 19 3/4 60x 8 x 5/16 7.44 15.9 6.3 35 - - 19 3/4 60x 10 x 3/8 8.78 17.5 6.3 35 - - 19 3/4 60

    Notas:Los perfiles sombreados no son de fabricacin comn, por lo que se recomienda consultar con el proveedor su disponibilidad.Espac. recom. Es espaciamiento recomendado.

    * Redondeado al milmetro

    Designacintamao y espesor t

    mm x mm* in. x in.

    Dimetromximo

    Peso k RGramil Sujetadores

  • LIANGULO DE LADOS IGUALES

    PROPIEDADES

    I S r x = y I S r e w I S r e z

    cm2 cm4 cm3 cm cm cm4 cm3 cm cm cm4 cm3 cm cm

    19 x 3 3/4 x 1/8 1.11 0.37 0.28 0.58 0.58 0.58 0.43 0.73 1.34 0.16 0.19 0.38 0.82x 5 x 3/16 1.59 0.50 0.39 0.56 0.66 0.83 0.62 0.72 1.34 0.17 0.18 0.38 0.93

    22 x 3 7/8 x 1/8 1.32 0.58 0.38 0.66 0.66 0.90 0.58 0.82 1.56 0.26 0.28 0.48 0.93x 5 x 3/16 1.90 0.79 0.54 0.66 0.74 1.23 0.79 0.81 1.56 0.35 0.33 0.48 1.05

    25 x 3 1 x 1/8 1.52 0.92 0.51 0.79 0.76 1.24 0.69 0.93 1.79 0.41 0.38 0.48 1.07x 5 x 3/16 2.21 1.25 0.72 0.76 0.81 2.08 1.16 0.93 1.79 0.41 0.36 0.48 1.14x 6 x 1/4 2.80 1.54 0.92 0.74 0.86 2.49 1.39 0.91 1.79 0.83 0.69 0.48 1.21

    32 x 3 1 1/4 x 1/8 1.93 1.33 0.80 0.97 0.89 2.91 1.30 1.19 2.24 0.83 0.66 0.60 1.25x 5 x 3/16 2.79 2.54 1.16 0.97 0.97 3.74 1.67 1.19 2.24 0.83 0.61 0.60 1.37x 6 x 1/4 3.72 3.21 1.49 0.94 1.02 4.99 2.23 1.16 2.24 1.24 0.86 0.60 1.44

    38 x 3 1 1/2 x 1/8 2.34 3.25 1.18 1.17 1.07 5.41 2.01 1.47 2.69 1.24 0.82 0.73 1.51x 5 x 3/16 3.43 4.58 1.64 1.17 1.12 7.07 2.63 1.44 2.69 1.66 1.05 0.73 1.58x 6 x 1/4 4.40 5.83 2.20 1.14 1.19 8.74 3.24 1.42 2.69 2.49 1.48 0.73 1.68x 8 x 5/16 5.40 6.66 2.62 1.12 1.24 10.40 3.86 1.39 2.69 2.91 1.66 0.73 1.75x 10 x 3/8 6.34 7.91 3.11 1.12 1.30 12.07 4.48 1.37 2.69 3.33 1.82 0.73 1.83

    44 x 3 1 3/4 x 1/8 2.74 5.41 1.64 1.40 1.22 8.73 2.78 1.72 3.14 2.08 1.21 0.86 1.72x 5 x 3/16 4.03 7.49 2.29 1.37 1.30 11.65 3.71 1.70 3.14 2.91 1.59 0.86 1.83x 6 x 1/4 5.20 9.57 3.11 1.35 1.35 14.56 4.66 1.67 3.14 3.74 1.97 0.86 1.90x 8 x 5/16 6.39 11.24 3.77 1.32 1.40 17.48 5.56 1.65 3.14 4.57 2.32 0.86 1.97

    51 x 3 2 x 1/8 3.10 7.91 2.13 1.60 1.40 12.49 3.48 1.97 3.58 3.32 1.68 0.99 1.97x 5 x 3/16 4.61 11.45 3.11 1.57 1.45 17.48 4.88 1.95 3.58 4.57 2.28 0.99 2.00x 6 x 1/4 6.06 14.57 4.10 1.55 1.50 22.47 6.27 1.93 3.58 5.82 2.77 0.99 2.10x 8 x 5/16 7.42 17.46 4.92 1.52 1.55 26.63 7.43 1.90 3.58 7.07 3.24 0.99 2.18x 10 x 3/8 8.77 19.98 5.74 1.50 1.63 30.80 8.60 1.87 3.58 8.32 3.61 0.99 2.30

    64 x 4 2 1/2 x 5/32 4.88 19.44 4.21 1.98 1.73 31.10 6.93 2.52 4.49 7.84 3.20 1.24 2.45x 5 x 3/16 5.81 22.89 4.92 1.98 1.75 36.62 8.15 2.46 4.49 9.15 3.70 1.24 2.47x 6 x 1/4 7.68 29.14 6.39 1.96 1.83 45.36 10.10 2.43 4.49 11.65 4.58 1.24 2.54x 8 x 5/16 9.48 35.38 7.87 1.93 1.88 55.35 12.32 2.41 4.49 14.56 5.51 1.24 2.64x 10 x 3/8 11.16 40.79 9.34 1.91 1.93 64.09 14.27 2.38 4.49 17.06 6.29 1.24 2.71

    Notas:Los perfiles sombreados no son de fabricacin comn, por lo que se recomienda consultar con el proveedor su disponibilidad.

    * Redondeado al milmetro

    Eje Z-ZDesignacintamao y espesor t

    mm x mm* in. x in.

    AreaEjes X-X y Y-Y Eje W-W

  • LIANGULO DE LADOS IGUALES

    DIMENSIONES

    g g 1 g 2Espac.recom.

    kg/m mm mm mm mm mm mm in. mm

    76 x 5 3 x 3/16 5.52 12.7 7.9 45 - - 22.2 7/8 70x 6 x 1/4 7.29 14.3 7.9 45 - - 22.2 7/8 70x 8 x 5/16 9.08 15.9 7.9 45 - - 22.2 7/8 70x 10 x 3/8 10.72 17.5 7.9 45 - - 22.2 7/8 70x 11 x 7/16 12.35 19.1 7.9 45 - - 22.2 7/8 70x 13 x 1/2 13.99 20.6 7.9 45 - - 22.2 7/8 70x 16 x 5/8 17.11 27.0 7.9 45 - - 22.2 7/8 70

    89 x 5 3 1/2 x 3/16 6.55 12.7 8.4 50 - - 22.2 7/8 70x 6 x 1/4 8.63 14.3 8.3 50 - - 22.2 7/8 70x 8 x 5/16 10.71 15.9 8.1 50 - - 22.2 7/8 70x 10 x 3/8 12.65 17.5 8.0 50 - - 22.2 7/8 70x 13 x 1/2 16.52 20.6 7.6 50 - - 22.2 7/8 70

    102 x 6 4 x 1/4 9.82 15.9 9.5 60 - - 22.2 7/8 70x 8 x 5/16 12.20 17.5 9.5 60 - - 22.2 7/8 70x 10 x 3/8 14.58 19.1 9.5 60 - - 22.2 7/8 70x 11 x 7/16 16.82 20.6 9.5 60 - - 22.2 7/8 70x 13 x 1/2 19.05 22.2 9.5 60 - - 22.2 7/8 70x 16 x 5/8 23.36 25.4 9.5 60 - - 22.2 7/8 70x 19 x 3/4 27.53 28.6 9.5 60 - - 22.2 7/8 70

    127 x 10 5 x 3/8 18.30 22.2 12.7 70 45 50 25.4 1 80x 11 x 7/16 21.28 23.8 12.7 70 45 50 25.4 1 80x 13 x 1/2 24.11 25.4 12.7 70 45 50 25.4 1 80x 16 x 5/8 29.76 28.6 12.7 70 45 50 25.4 1 80x 19 x 3/4 35.12 31.8 12.7 70 45 50 25.4 1 80

    152 x 10 6 x 3/8 22.17 22.2 12.7 90 60 60 25.4 1 90x 11 x 7/16 25.60 23.8 12.7 90 60 60 25.4 1 90x 13 x 1/2 29.17 25.4 12.7 90 60 60 25.4 1 90x 14 x 9/16 32.59 27.0 12.7 90 60 60 25.4 1 90x 16 x 5/8 36.01 28.6 12.7 90 60 60 25.4 1 90x 19 x 3/4 42.71 31.8 12.7 90 60 60 25.4 1 90x 22 x 7/8 49.26 35.0 12.7 90 60 60 25.4 1 90x 25 x 1 55.66 38.1 12.7 90 60 60 25.4 1 90

    Notas:Los perfiles sombreados no son de fabricacin comn, por lo que se recomienda consultar con el proveedor su disponibilidad.Espac. recom. Es espaciamiento recomendado.

    * Redondeado al milmetro

    Designacintamao y espesor t

    mm x mm* in. x in.

    Dimetromximo

    Peso k RGramil Sujetadores

  • LIANGULO DE LADOS IGUALES

    PROPIEDADES

    I S r x = y I S r e w I S r e z

    cm2 cm4 cm3 cm cm cm4 cm3 cm cm cm4 cm3 cm cm

    76 x 5 3 x 3/16 7.03 40.01 7.22 2.39 2.08 64.38 11.97 3.03 5.38 16.12 5.48 1.51 2.94x 6 x 1/4 9.29 51.60 9.50 2.36 2.13 78.66 14.62 2.94 5.38 20.39 6.86 1.49 2.97x 8 x 5/16 11.48 62.90 11.60 2.34 2.21 96.98 18.02 2.92 5.38 24.97 8.21 1.47 3.04x 10 x 3/8 13.61 73.30 13.60 2.31 2.26 112.79 20.96 2.89 5.38 29.55 9.41 1.47 3.14x 11 x 7/16 15.68 82.80 15.60 2.31 2.31 128.19 23.82 2.87 5.38 33.71 10.34 1.47 3.26x 13 x 1/2 17.74 92.40 17.50 2.29 2.36 142.76 26.53 2.84 5.38 38.29 11.53 1.47 3.32x 16 x 5/8 21.68 109.10 21.30 2.24 2.49 158.16 29.39 2.82 5.38 42.45 12.05 1.47 3.52

    89 x 5 3 1/2 x 3/16 8.36 64.36 9.92 2.78 2.40 102.84 16.38 3.51 6.29 25.88 7.63 1.76 3.39x 6 x 1/4 10.90 83.66 13.01 2.77 2.46 133.53 21.26 3.50 6.29 33.79 9.71 1.76 3.48x 8 x 5/16 13.48 101.95 16.00 2.74 2.51 162.49 25.87 3.47 6.29 41.41 11.66 1.75 3.55x 10 x 3/8 16.00 119.46 18.84 2.72 2.57 191.20 30.44 3.47 6.29 50.22 13.87 1.74 3.63x 13 x 1/2 20.97 151.51 24.41 2.69 2.69 238.09 37.91 3.37 6.29 61.59 16.21 1.73 3.80

    102 x 6 4 x 1/4 12.52 124.90 17.20 3.18 2.77 191.89 26.72 3.96 7.18 48.10 12.30 2.00 3.91x 8 x 5/16 15.48 154.40 21.10 3.15 2.84 239.33 33.33 3.93 7.18 61.60 15.36 2.00 4.01x 10 x 3/8 18.45 181.50 24.90 3.12 2.89 283.03 39.41 3.91 7.18 73.25 18.17 1.98 4.03x 11 x 7/16 21.35 206.90 28.70 3.12 2.94 322.99 44.98 3.88 7.18 83.66 20.15 1.98 4.15x 13 x 1/2 24.19 231.40 32.30 3.10 2.99 361.28 50.31 3.86 7.18 94.48 22.44 1.98 4.21x 16 x 5/8 29.74 277.20 39.30 3.05 3.12 433.71 60.40 3.81 7.18 115.71 26.35 1.98 4.39x 19 x 3/4 35.10 318.80 46.00 3.02 3.22 497.39 69.27 3.75 7.18 136.10 29.97 1.95 4.54

    127 x 10 5 x 3/8 23.29 363.80 39.70 3.96 3.53 579.60 64.60 4.99 8.96 148.00 29.80 2.52 4.97x 11 x 7/16 26.97 417.10 45.70 3.94 3.58 662.90 74.00 4.96 8.96 171.10 33.80 2.52 5.06x 13 x 1/2 30.65 468.30 51.60 3.91 3.63 746.50 83.30 4.94 8.96 190.10 37.20 2.49 5.12x 16 x 5/8 37.81 535.30 63.30 3.86 3.76 897.30 100.50 4.87 8.96 233.30 43.90 2.48 5.31x 19 x 3/4 44.77 655.20 74.20 3.81 3.86 1035.50 115.60 4.82 8.96 275.30 50.50 2.48 5.45

    152 x 10 6 x 3/8 28.13 640.60 57.80 4.78 4.16 1018.60 94.60 6.02 10.76 262.60 44.70 3.05 5.88x 11 x 7/16 32.65 735.90 66.70 4.75 4.22 1173.50 109.00 5.99 10.76 298.30 50.10 3.02 5.96x 13 x 1/2 37.10 828.70 75.50 4.72 4.27 1326.10 123.30 5.97 10.76 331.30 54.90 2.99 6.03x 14 x 9/16 41.48 918.60 84.20 4.70 4.34 1464.60 136.00 5.94 10.76 372.60 60.80 2.99 6.12x 16 x 5/8 45.87 1005.60 92.80 4.67 4.39 1604.80 149.20 5.92 10.76 406.40 65.60 2.98 6.20x 19 x 3/4 54.45 1171.70 109.10 4.65 4.52 1859.20 172.70 5.85 10.76 484.20 75.90 2.98 6.38x 22 x 7/8 62.77 1328.60 125.00 4.60 4.62 2101.80 196.20 5.79 10.76 555.40 85.10 2.97 6.52x 25 x 1 70.97 1476.00 140.00 4.57 4.72 2327.80 203.30 5.73 10.76 624.20 93.70 2.96 6.66

    Notas:Los perfiles sombreados no son de fabricacin comn, por lo que se recomienda consultar con el proveedor su disponibilidad.

    * Redondeado al milmetro

    Eje Z-ZDesignacintamao y espesor t

    mm x mm* in. x in.

    AreaEjes X-X y Y-Y Eje W-W

  • LDANGULO DE LADOS DESIGUALES

    DIMENSIONES

    g 1 g 2

    kg/m mm mm mm mm mm in. mm in.

    102 x 76 x 6 4 x 3 x 1/4 8.63 17.46 9.3 45 60 22.2 7/8 22.2 7/8x 8 x 5/16 10.72 19.1 9.3 45 60 22.2 7/8 22.2 7/8x 10 x 3/8 12.63 20.64 9.3 45 60 22.2 7/8 22.2 7/8x 11 x 7/16 14.58 22.23 9.3 45 60 22.2 7/8 22.2 7/8x 13 x 1/2 16.52 23.81 9.3 45 60 22.2 7/8 22.2 7/8x 16 x

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.