huawei V1 R3 upgrade guide

V100R300C03SPC200 upgrade Guide

UPGRADE PROCESS

1-Send an Email to NOC before 24 hours.2- Call TX NOC to double Check the old CSH Version and management status.

• Preparation steps before action

1-Access site process. • Site Access

Call TX NOC to collect the print screens for the the following:

NE layout, Ne attribute, SDHservice configuration, link configuration, Ethernet

interface, Ethernet sevice configuration, Clock periority, Communication parameters, IP stack

parameters, OSPF parameters

• Secure backup

UPGRADE STEPSOPEN DC_STANDALONE PROGRAM FOR STARTING THE UPGRADE

FIRSTLY CONFIGURE FTP SERVER CONFIGURATION

FTP SERVER MUST BE IN RUNNING STATUS

FTP SETTING

SYSTEM IP ADDRESS MUST BE THE SAME AS YOUR LAPTOP IP ADDRESS

1. YOU SHOULD PUT THE FILE IN FILE TRANSFER DIRECTORY (IF D: IS CD-ROM CHANGE IT TO E:).2. YOU SHOULD TEST FTP AND THE RESULT SHOULD BE AS HERE

TEST FTP TO CHECK THE CONFIGURATION

BACKUP

BEFORE AFTER

New Task

Upgrade steps

Query then next

Upgrade steps

Upgrade steps

Upgrade steps

Upgrade steps

Upgrade steps

Upgrade steps

Select the target pakage from the specified folder

Upgrade steps

Select the target pakage from the specified folder Select the path from here

Upgrade steps

Upgrade steps

THE PATH MUST BE AS THE FOLLOWING D:/OPTIX RTN950V100R003C03SPC200(5.76.03.45)SOFTWARE_PKG

Upgrade steps

SELECT THE NE.PKG FILE AND THEN PRESS OK

Upgrade steps

AFTER THE NEW VERSION APPEARED PRESS OK

Upgrade steps

Upgrade steps

PRESS OK AND CONTINUE

Upgrade steps

FROM THE DRAG MENU SELECT YOUR TARGET VERSION

Upgrade steps

CONFIRM THE VERSION BY PRESSING “YES”

Upgrade steps

CONFIRM THE PKG FILE AND PRESS OK

Upgrade steps

BE SURE YOU CHECK IN THE PAUSE LIST BEFORE ACTIVATE AND COMMIT AND THEN PRESS NEXT

Upgrade steps

CONFIRM THE PKG BY PRESSING OK

Upgrade steps

PRESS START TASK TO START THE UPGRADE STEPS

Upgrade steps

PRESS YES TO CONFIRM STARTING THE UPGRADE

Upgrade steps

Upgrade steps

Upgrade steps

Upgrade steps

Upgrade steps

PRESS CONTINUE TASK TO START ACTIVATION STEP

Upgrade steps

PRESS YES TO CONFIRM CONTINUE TASK

Upgrade steps

PRESS OK

Upgrade steps

Upgrade steps

Upgrade steps

PRESS CONTINUE TASK TO START COMMIT STEP

Upgrade steps

CONFIRM THE CONTINUE OPERATION BY PRESSING YES

Upgrade steps

PRESS OK

Upgrade steps

Upgrade steps

THE OPERATION SUCCEED AND YOU CAN GET REPORT BY PRESSING “GENERATE REPORT”

Upgrade steps

Choose the correct path and then press “OK”

Upgrade stepsWhen we upgrade from release to other we must upgrade the capacity license

From the ” board software management” menu select “Board software upgrade”

Upgrade steps

Continue by choose “Login NE”

Upgrade steps

Continue by choose “Query Board”

Upgrade steps

Choose “7-CSH” and press “>>”

Upgrade steps

Upgrade steps

Press the upgrade version folder select

Upgrade steps

Set the board software and load type to “license” and then “select software”

Upgrade steps

Select the file *.ini file

Upgrade steps

Confirm the file sected by pressing “OK”

Upgrade steps

Press “yes” to continue

Upgrade steps

Press “start” to start downloading the license

Upgrade steps

Upgrade steps

The license downloaded successfuly

Upgrade stepsThe way to create the license file”*.ini”:

Firstly open the following path:V100R003C03SPC200(5.76.03.45)SoftWare_lcs\OptiX RTN 950 V100R003C03SPC200(5.76.03.45)SoftWare_lcs\NELCS+·¦+¦ñ+¯

Upgrade steps

After choosing the specification needed press create to create the ini file

Upgrade steps

Select the path to save the ini file and then press save

Upgrade steps

After the upgrade the RTN may report some or all the following alarms

CP_TEL_EXHAUST(major alarm): ignore this alarm

User_password needed to be cahanged: close the dc_standalone

Port_mode_mismatch(EM6F): check the mode of the node B and change it to 100M full-duplex

CLK_NO_TRACE_MODE:from NE EXPLORE—select configurationCLOCKClock Subnet Configuration add one source for your clock and then press apply the alarm will clear.

Thank You