57 COMPACT HORIZONTAL MULTISTAGE PUMPS Horizontal centrifugal multistage pumps suitable for pressure boosting systems, car washing, small garden irrigation and general clean water pumping. SPECIFICATIONS • Maximum working pressure : 10 bar • Maximum liquid temperature : 35˚C according EN 60335-2-41 for domestic use 40˚C for other uses MATERIALS TECHNICAL DATA • Pump body and bracket in cast iron • Asynchronous 2 pole motor • External casing in AISI 304 • Insulation: Class F • Impeller and diffuser in technopolymer • Protection degree: IP44 • Shaft in AISI 416 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Mechanical seal in carbon/ceramic/NBR • Permanent split capacitor and automatic thermal overload protection for single-phase version • Thermal protection to be provided by the user for three-phase version • DNM 1” – DNA 1” 1/4 for COMPACT B/12 and B/15, 1” for other models DIMENSIONAL TABLE
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
57
COMPACT
HORIZONTAL MULTISTAGE PUMPS
Horizontal centrifugal multistage pumps suitable for pressure boosting systems, car washing,small garden irrigation and general clean water pumping.
SPECIFICATIONS• Maximum working pressure : 10 bar• Maximum liquid temperature : 35˚C according EN 60335-2-41 for domestic use
40˚C for other uses
MATERIALS TECHNICAL DATA• Pump body and bracket in cast iron • Asynchronous 2 pole motor• External casing in AISI 304 • Insulation: Class F• Impeller and diffuser in technopolymer • Protection degree: IP44• Shaft in AISI 416 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz• Mechanical seal in carbon/ceramic/NBR • Permanent split capacitor and automatic thermal overload
protection for single-phase version• Thermal protection to be provided by the user for three-phase
version• DNM 1” – DNA 1” 1/4 for COMPACT B/12 and B/15, 1” for
other models
DIMENSIONAL TABLE
58
COMPACT
PERFORMANCE CURVES
PERFORMANCE TABLE
59
COMPACT BOOSTER
COMPACT BOOSTER MODEL AM – PT
Horizontal centrifugal multistage pumps suitable for pressure boosting systems, car washing,small garden irrigation and general clean water pumping.
SPECIFICATIONS• Maximum working pressure : 10 bar• Maximum liquid temperature : 35˚C according EN 60335-2-41 for domestic use
40˚C for other uses
FEATURES / BENEFITS TECHNICAL DATA• Fully tested & assembled unit • Asynchronous 2 pole motor
Ensure trouble-free operation. • Insulation: Class F• Stainless steel pump set used • Protection degree: IP44
Hygienic and corrosion-free water. • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz• EBARA 1 year warranty on all • Permanent split capacitor and automatic thermal overload
components used protection for single-phase versionMore value for money. • Thermal protection to be provided by the user for three-phase
• Quiet operation versionGood and enjoyable pressure expected.
OPERATING FEATURES• Quiet operation, thanks to EBARA design that makes this possible• Starts and stops the pump when the tap is opened or closed• Maintain pressure at a constant level during operation, eliminating hot/cold shower fluctuations• Shuts off the pump if loss of prime or dry-running occurs• Ensure your pump system to operate at optimum performance
PC CONTROLLERPRESSCONTROL (PC) is an electronic device ensuring optimum control of automatic waterpressure system.
An intelligent combination of hydraulic and electronic know-how, PC controller monitors both pressureand flow and automatically controls the pump efficiently. No pressure tank required and no adjustment ofpressure setting is required. Also, any risk of pump damage as a result of dry running is eliminated, asthe device will automatically cut-off should the incoming water supply is insufficient.
Much more compact than traditional system, EBARA COMPACT BOOSTER type AM-PC is absolutelyquiet, durable and simple to install.
MODEL
Compact BoosterAM 6-PC
Compact BoosterAM 8-PC
20
1.2
30.7
39.7
30
1.8
28.2
36.1
40
2.4
25.2
32
50
3
21.8
27.4
60
3.6
18
22.4
80
4.8
9
10.5
Connection
1” x 1”
1” x 1”
*Application /min
m3 /h
Hea
d in
m
*For guidance only
kW
0.4
0.6
COMPACT BOOSTER MODEL AM - PC
62
COMPACT BOOSTER MODEL AM-PC
COMPACT BOOSTER
FRONT VIEW SIDE VIEW
Pump Type
COMPACT AM 8-PC
COMPACT AM 6-PC
Single Phase
172.5
146.5
E
Dimensions (mm)
183.5
183.5
1~
B D
359.5
333.3
51.5
51.5
H2 MH1
38.5
38.5
62
62
127.5
127.5
DNAR
1" NPT
1" NPT
172.5
146.5
kW
0.4
0.6 134
108
CA
R
B
D
M
DNA
166
H1H2
150
Ø25
C
130
100
A
PRESS CONTROL
Ø25
DIMENSION
63
MATRIX 3 - 9 T / 1.5 M
SINGLE PHASE; OTHERWISE 3 PHASE
MOTOR OUTPUT IN kW
N° OF IMPELLERS
m3/h MAX. EFFICIENCY
MODEL
T: THREADED PIPECONNECTION
2 3 4 5 6 7 8 9
3 5 10 18
0.45 0.65 0.75 0.9 1.3 1.5 2.2 3.0 4.0
Type Key
STAINLESS STEEL CENTRIFUGAL PUMP
MATRIX
APPLICATIONS• Water distribution and treatment• Industrial washing equipment• Heating and air-conditioning• Pressure boosting• Industrial plants• Irrigation• Industrial & domestic pumping• General boosting application
SPECIFICATIONS• Maximum liquid temperature: 110°C• Maximum working pressure: 10 bar• Maximum chlorine content: 500 ppm
MATERIALS• Casing, impeller, intermediate casing,
casing cover and shaft in AISI 304• Mechanical seal in Carbon/Ceramic/EPDM• Bracket and motor casing in aluminium
64
SPECIFICATIONS
MATRIX
PUMP
Liquid handled
Construction
Material
Pipe connection
Max pressure [MPa]
Applicable standard of test
Type of liquid
Max temperature [°C]Min temperature [°C]Max chlorine content
Low noise Vertical Multistage Pump, the motor is cooled by pumped liquid, whilst simultaneouslyreducing the noise levels as the liquid passes around the motor within a water jacket. The doublemechanical seal with interposed chamber containing lubrication fluid ensuring long life and reliability.Suitable for booster sets, water features and irrigation systems. This pump is also suitable forinstallations where the pump is required to run under flood conditions. Supplied with 5mts. Cablelength type HO7 RNF.
SPECIFICATIONS TECHNICAL DATA• Maximum working pressure : 10 bar • Asynchronous 2 pole motor cooled by the pumped liquid• Maximum liquid temperature : • Insulation: Class F
35˚C according to EN 60335-2-41 for domestic use • Protection degree: IP6840˚C for other uses • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz
• Permanent split capacitor and automatic thermal overloadMATERIALS protection for single-phase version• Pump body, casing cover, external casing • Thermal protection to be provided by the user for three-
and motor casing in AISI 304 phase version• Impeller and diffuser in technopolymer • DNA – DNM 1” 1/4• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR
DIMESIONAL TABLE
70
PERFORMANCE CURVES
MULTIGO
PERFORMANCE TABLE
71
EVM
EVM
The new EVM pumps are vertical multistage centrifugal models, which come in various versions:Cast iron (EVMG), AISI 304 stainless steel (EVM), AISI 316 stainless steel (EVML) andWRAS-approved (EVMW).
APPLICATIONS SPECIFICATIONS• Washing system • Maximum working pressure:• Water treatment plants • 16 bar• Reverse Osmosis system • 25 bar• Some chemical applications • 30 bar (only for EVM32-EVM45)• Conditioning systems • Liquid temperature: from -15°C up to +120°C• Heating systems from -15°C up to +85°C (for EVMW)• Industrial boilers• Pressure boosting for industrial systems TECHNICAL DATA
• Asynchronous 2 poles motorMATERIALS • Insulation: Class F• Pump body, external casing, casing cover, • Protection: IP55
impellers, diffusers, bearing sleeve, • 1~230V ± 10% 50Hz (up to 2.2 kW)coupling guard and bolts in contact with 3~230/400V ± 10% 50Hz delta connectionliquid AISI 304 (EVM), AISI 316 (EVML), (up to 4 kW included)EVMG version: bottom casing in cast iron 3~400/690V ± 10% above 5.5kW
• Tie-rods and bolts not in contact with liquidin zinc coated steel
• Shaft in AISI 316• Bearing in contact with liquids in tungsten-carbide• Bracket and base in cast iron• Mechanical seal in SiC/Carbon/FPM
(EVM3-EVM5-EVM10-EVM18)• Cartridge mechanical seal standard
(EVM32-EVM45-EVM64)
(F=round flanges; N=oval flanges)
72
STANDARD SPECIFICATIONS - EVM (L)
STANDARD SPECIFICATIONS - EVM (G)
EVM
Model Type 3 5 10 18 32 45 64Application Water supply, Light industrial (boiler feed, washing, coolant, etc.)
Temperature -15 to +120°C
Flow / head 80 m3/hr (max): 300m (max)
Max. working pressure 1.6/2.5MPa (16Bar/25Bar) 1.6/2.5/3.0Mpa (16/25/30Bar)
Sealing 16 bar: Mechanical-seal - according to DIN Cartridge type Mechanical-seal
25 bar: Catridge Mechanical-seal - according to DIN - according to DIN
Connecting flange OVAL or DIN TYPE DIN TYPE
Material Impeller EN 1.4301 (AISI 304)
Intermediate casing EN 1.4301 (AISI 304)
Bottom casing EN 1.4301 (AISI 304) - EVM
Cast iron (EVMG)
Casing cover Cast iron
Outer casing EN 1.4301 (AISI 304)
Shaft EN 1.4401 (AISI 316)
Liner ring EPDM/EN 1.4301 (AISI 304)
Motor bracket Cast iron
Mechanical seal Silicon Carbide/Carbon/FPM
O-ring EPDM
Motor No. of Poles 2P (3000rpm:50Hz - Synchronous speed)Phase Three phaseVoltage/Hz 380V/415:50Hz (or 400V:50Hz)
Flange mount IM B14 (up to 4kW)(IEC motor) IM B5 (above 5.5kW)
OPTIONAL SPECIFICATIONS
Material of Construction All wetted parts in SUS304 available upon request.
Model Type 3 5 10 18 32 45 64Application Water supply, R.O., D.I. Water, ultra-filter systems, process water, etc.
Temperature range -15 to +120°C
Flow / head 80 m3/hr (max): 300m (max)
Max. working pressure 1.6/2.5MPa (16Bar/25Bar) 1.6/2.5/3.0Mpa (16/25/30Bar)
Sealing Cartridge Mechanical-seal - according to DIN
Connecting flange OVAL or DIN TYPE DIN TYPE
Material Impeller EN 1.4401 (AISI 316)
Intermediate casing EN 1.4401 (AISI 316)
Bottom casing EN 1.4401 (AISI 316)
Casing cover EN 1.4401 (AISI 316)
Outer casing EN 1.4401 (AISI 316)
Shaft EN 1.4401 (AISI 316)
Liner ring PTFE/EN 1.4401 (AISI 316)
Motor bracket Cast iron/EN 1.4401 (AISI 316)
Mechanical seal Silicon Carbide/Carbon/FPM
O-ring EPDM
Motor No. of Poles 2P (3000rpm:50Hz - Synchronous speed)Phase Three phaseVoltage/Hz 380V/415:50Hz (or 400V:50Hz)Flange mount IM B14 (up to 4kW)(IEC motor) IM B5 (above 5.5kW)
OPTIONAL SPECIFICATIONS
Conneting flange Vitaulic coupling only for AISI 316 PUMPDIN round flange for 16 bar range
73
EVM
EVM
EBARA Corporation was established in 1912 as a pump manufacturer and today EBARA is the world’s foremost manufacturer of pump and pumpsystem. EBARA is proudly presenting Vertical Multi-stage pump type EVM, manufactured with great experience of EBARA in design and productionof stamped stainless steel pumps, EBARA EVM pumps offer technically advance designs to meet most market demands, including pumping ofaggressive liquids.
Two standard pump options are available to satisfy most of the market requirements:- EVM(G) : Bottom casing in cast iron, other liquid contact parts in SS304 stainless steel for general water supply usage.- EVM(L) : All wetted contact upon parts in SS316 stainless steel for aggressive liquid pumping operation.
Optional materials available upon request: All wetted contact parts in SS304 stainless steel for industrial pumping applications.
STANDARD IEC MOTORWITH ALL BEARING
1. Quality motor used.Standard IEC electrical motor usedfor EVM pump; thus ensuring easyreplacement as standard motor is easilyavailable in the market.
2. Spacer coupling foruser-friendly servicing.For 11kW & above models, uniquelydesigned ‘split’ type spacer coupling areused to permit easy assembly/disassemblyworks without dismantling pipe workand motor.
BALL BEARING
Heavy duty bearing set mounted on pumpmotor bracket, thus eliminating use of
non-standard motors to ensure reliablepump operation.
3. Cartridge mechanical seal.Cartridge mechanical seal isused for all pump models, exceptEVM 3-18 (16Bar). Thus permitingeasy maintenance works at site.
4. Wide selection options.Two (2) pump types are available asstandard i.e. EVMG (Cast iron bottomcasing; other wetted parts in SUS304) andEVML (All wetted parts in SUS316L).
• All wetted parts in SUS304 availableas option.
EVM(G) VersionFC/SUS304
EVM (L) VersionSUS316
Option: EVM Version SUS304
6.
High efficiency hydraulicdesignEBARA owned R&D has resulted in thenewly developed hydraulic parts for EVM,particularly impellers and intermediatecasing that provides high efficiencyoperation.
2D S/S impeller
3D S/S impeller
Guide vaneintermediatecasing
Bottom casing support.For EVM 45 and 64, unique bottom casingbearing is used to enhance longeroperating life of the pumps.
Tungsten carbide BottomBearing.
5.
74
SELECTION CHART - EVM 3 - 64 50 HZ
EVM
IDENTIFICATION CODE - EVM 3 - 64
Capacity (m3/min)
EVM ( ) 5 8 - 0 N 5 1.5 (E)
Model Series
(G): Cast iron Bottom Casing(L): 316 SS( ): 304 SS (option)
Nominal Capacity (m3/hr)
No. of Impeller
E: for inverted drive onlyM: for Single Phase only