Top Banner
Gemma Power Systems 769 Hebron Avenue Glastonbury, CT 06033 Phone: (860) 659-0509 Fax: (860) 659-0607 www.gemmapower.com Gemma Renewable Power 769 Hebron Avenue Glastonbury, CT 06033 Phone: (860) 659-0509 Fax: (860) 659-0607 www.gemmarenewablepower.com
54

Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

Mar 12, 2018

Download

Documents

dobao
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

                                                      

 

GGeemmmmaa PPoowweerr SSyysstteemmss  

769 Hebron Avenue Glastonbury, CT 06033 Phone: (860) 659-0509

Fax: (860) 659-0607 www.gemmapower.com

GGeemmmmaa RReenneewwaabbllee PPoowweerr  

769 Hebron Avenue Glastonbury, CT 06033

Phone: (860) 659-0509 Fax: (860) 659-0607

www.gemmarenewablepower.com

Page 2: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

   

TTaabbllee ooff CCoonntteennttss  

  

Company Overview  

o Introduction  

o Experience & Qualifications

o Quality Assurance / Quality Control

o Experienced People

o Safety Program Overview  

Recent Projects  

Project Fact Sheets  

Power Experience  

Development / Consulting Experience  

Operations & Maintenance Experience

Page 3: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

   

IInnttrroodduuccttiioonn  

  

The Gemma Companies are dedicated to the power and renewable fuels industry. All of our projects are power generation and renewable fuel facilities. Our experience includes gas and oil-fired combined and simple-cycle power plants, wind, and solar facilities, wood/coal-fired plants, waste-to-energy plants, biodiesel plants, and ethanol plants, all performed on an EPC basis.  Our experience in development, engineering, construction, commissioning and the operation of power and renewable fuels facilities allows us to integrate all of these facets into our design and construction. Management of the project, from the initial design and procurement phases to final commissioning and turnover, is our strength. Throughout the entire project, safety and quality are our trademarks.  Gemma understands how to identify the keys to project success for all participants.  We start by identifying and assigning the right people, who are collectively dedicated to achieving the project objectives - the quality and commitment of the management team is the most significant contributing variable to the outcome of a project.  The Gemma organization is comprised of great people; we understand that they are our primary assets.  Project success also requires creative solutions to difficult problems.  Over the years, we have solved many difficult problems, ranging in nature from political, to technical, to labor-related issues.  We recognize that being flexible and adaptable, as well as always giving consideration to the long and short-term objectives of the parties involved, leads to the appropriate solutions.  Gemma is uniquely qualified to provide the leadership that will ensure your project's success.

Page 4: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

   

EExxppeerriieennccee && QQuuaalliiffiiccaattiioonnss    

Over 10,000 Megawatts of generating capacity installed and under contract

on an EPC basis

  Turnkey installation of 41 combustion turbines

 

 

Installation of 600 MW of wind turbines  

 

Over 270 MMGPY of biodiesel projects on an EPC basis  

 

Over 100 MMGPY of ethanol projects on an EPC basis  

 

Over 40 engineering, procurement, and construction projects

Page 5: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

   

QQuuaalliittyy AAssssuurraannccee -- QQuuaalliittyy CCoonnttrrooll    

Comprehensive Quality Program based on ISO 9000-applicable standards  

  

ASME / National Board accreditation for Power Boiler Assembly, Power  

Piping, and Repairs/Alterations (“A”, “PP”, “R” Code Stamps)  

  

Orientation and Training  

  

Project-specific Quality Plan  

  

Beginning with Design and Engineering and following through until completion

of Commissioning   

Focus on prevention of non-conforming material, methods or defects  

  

Records retention and documentation for Turnover and Commissioning  

  

Experienced Quality Professionals  

  

Accountability to Senior Management

Page 6: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

   

EExxppeerriieenncceedd PPeeooppllee    

Engineering and Construction professionals  

  

Strong field supervision  

  

Degreed safety professionals  

  

Significant experience soliciting, evaluating, negotiating, contracting and

managing subcontractors and equipment suppliers   

Ability to self-perform all or any aspects of the Project in order to control

budgets and schedule

Page 7: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

   

SSaaffeettyy PPrrooggrraamm OOvveerrvviieeww  ACCIDENT PREVENTION POLICY  Gemma has established an Accident Prevention Policy to provide its management, employees, subcontractors, partners and clients with a firm understanding of the Company's position regarding the prevention of accidents, to provide the guidelines for the safety program and to assist management in meeting its responsibility to provide safe working conditions for all employees. The Company has a primary concern for the safety of all employees. Accident prevention not only involves personal safety, but also many other factors affecting the progress and efficiency of the work, such as, the mechanical condition of equipment, storage of materials, work environment, health related matters and fire prevention. Gemma’s goal is an efficient and productive construction effort that incorporates performance standards for safe working methods, and a strong safety consciousness by all employees, supervisors, subcontractors and material suppliers.

GEMMA IS COMMITTED TO A ZERO ACCIDENT CULTURE THAT SAYS...

ACCIDENTS ARE NOT INEVITABLE LOST TIME INJURIES ARE NOT ACCEPTABLE SAFETY IS A CONDITION OF EMPLOYMENT & EVERYONE’S RESPONSIBILITY SUPERVISION IS HELD ACCOUNTABLE  PROGRAM HIGHLIGHTS  -Substance Abuse Policy (pre-employment, post-accident, random* drug screening) -New Employee Orientation -Supervisory Training -Regulatory Compliance -Job Hazard Analysis -Critical Equipment Inspections -Injury Management -Employee Compliance Training -Supervisor Safety Measurement & Review -Environmental Hazard Assessment and Control -Audit Program and With Tracking, Measurement and Controls -Contractor Pre-qualification Screening

Page 8: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

 

  

STAFF  Each Project is staffed with at least one safety professional whose qualifications consist of 10+ years safety experience or a Bachelor of Science Degree in Safety Management from an accredited institution, or both. Gemma Power Systems hires safety professionals directly versus using contract employees.  STATISTICAL INFORMATION  Gemma Power Systems has consistently performed better than the national average for its industry in recordable injury rates. We strive to maintain a ZERO Lost Time Injury Rate and our current Experience Modification Rate is reflective of our efforts. For 2010 our EMR was 0.90  The following charts indicate Gemma Power Systems’ commitment to its goal of ZERO INJURIES.

Page 9: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

    

RReecceenntt PPrroojjeeccttss  

Moxie Liberty Energy Project Moxie Liberty LLC

 

 

Ravenbrook Landfill Solar Project Southern Sky Renewable Energy

 Howard Wind Farm Expansion EverPower Wind Holdings, Inc.

 Patton Wind Farm EverPower Wind Holdings, Inc.

 ETEC Woodville Renewable Power Project East Texas Electric Cooperative

 CPV Sentinel Energy Project Competitive Power Ventures

 Canton Solar Energy Facility Southern Sky Renewable Energy

 Bishop Hill Wind Energy Center Invenergy Wind

 Middletown Repowering Project Gen-Conn Middletown, LLC

 Colusa Generating Station PG&E

 Vantage Wind Energy Project Invenergy Wind

 Grand Ridge Wind Energy Center Invenergy Wind

 A.L. Pierce Repowering Project CMEEC

 Roseville Energy Park City of Roseville

 Brayton Point Power Station Dominion

 La Rosita Power Facility Energia Azteca X (Intergen)

Rowan County Power, LLC Progress Energy  Hines PB-2 Power Project Progress Energy  Effingham County Power Project Progress Energy  DeSoto County Power Project Progress Energy  Vandolah Power Project El Paso International Company  Richmond County Phase I & II Power Project GE Power Systems  Larkspur Energy Facility InterGen North America  Indigo Energy Facility InterGen North America  Monroe Power Project Progress Energy  Broad River Energy Center GE Power Systems  Richland Peaking Project First Energy  Rocky Road Unit No. 4 Power Project Dynegy Power Corporation  Rockford Peaking Project Indeck Energy Services, Inc.  Port Neches Project Renewable Biofuels  Green Earth Fuels Project Green Earth Fuels Houston, LLC

Page 10: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

 

PPoowweerr EExxppeerriieennccee  

    

 

   

MOXIE LIBERTY ENERGY PROJECT  

Owner: Moxie Liberty LLC  

Location: Bradford County, PA  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Burns & Roe  

The Moxie Liberty Energy Project is 825 MW natural gas-fired combined cycle electrical generating facility consisting of two single-shaft trains.

-Siemens SGT6-8000H gas turbine generator -Vogt HRSG -Air Cooled Condenser -Ancillary and support facilities, building and systems -Electrical interconnection facilities and tie-ins for natural gas, water and waste water

 Gemma funded Moxie Liberty LLC in the development of this power plant and advanced its initial working capital. Limited notice-to-proceed was received on April 1, 2013. Full notice-to-proceed is anticipated by July 2013.

Page 11: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

    

Ravenbrook Landfill Solar Project  

Customer: Southern Sky Renewable Energy Ravenbrook, LLC  

Location: Carver, MA  

EPC Contractor: Gemma Renewable Power, LLC  

Owner: Southern Sky Renewable Energy, LLC  

The Ravenbrook Landfill Solar Project will consist of 22,000 ground mounted photovoltaic panels with a total generation output of 6 MW. The project will be constructed on a capped and closed landfill located in Carver, Massachusetts.

 

 Gemma Renewable Power’s EPC scope of work includes the engineering, procurement and installation of the ground mounted photovoltaic panels, along with the associated power conversion and interconnection facilities.

 

 Commercial operation of the facility is scheduled for June 2013.

Page 12: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Howard Wind Farm Expansion  

Customer: Howard Wind, LLC  

Location: Steuben County, New York  

EPC Contractor: Gemma Renewable Power, LLC  

Owner: Howard Wind, LLC/EverPower Wind Holdings, Inc.  

Gemma Renewable Power began construction of the 4.10 MW Howard Wind Farm Expansion Project in the summer of 2012. The project requires the installation of 2 additional REpower MM92 WTGs on 78.5m towers to the existing 51.25 MW Howard Wind Farm. Gemma’s project scope consists of engineering, procurement and installation of access roads and access road extensions, foundations, extension of the collection system, fiber optic cabling, installation of 2 padmount transformers, modifications to the collector substation and 2 REpower 2.05 MW MM92 78.5m Wind Turbine Generators.

 

 Access road construction commenced in July 2012 with turbine installation beginning in the fall of 2012. Commercial operation of the facility was reached December 1, 2012.

Page 13: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

  

   

Patton Wind Farm  

Customer: Patton Wind Farm, LLC

Location: Cambria County, Pennsylvania

EPC Contractor: Gemma Renewable Power, LLC

Owner: Patton Wind Farm, LLC/EverPower Wind Holdings, Inc.  

Gemma Renewable Power began construction of the 30 MW Patton Wind Farm in the spring of 2012. Gemma’s project scope consists of engineering, procurement and installation of roads, foundations, collection system, POI and collector substations and 15 Gamesa 2.0 MW G97 78m and 90m Wind Turbine Generators.

 

 Access road construction commenced in April 2012 with turbine installation beginning in September 2012. Commercial operation of the facility was reached in December 2012.

Page 14: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

 

  

ETEC Woodville Renewable Power Project  

Owner: East Texas Electric Cooperative  

Location: Woodville, TX  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Bibb Engineers  

The ETEC Woodville Project is a 49.9 MW biomass power plant fueled by chipped, un- merchantable timber processed within a mile of the site. The plant features a Shin Nippon steam turbine generator and a Riley Power advanced stoker boiler with integrated air quality control system (AQCS). The AQCS features Riley’s patented Multi-Pollutant Catalytic Reactor (MPCR) for low NOx, CO and VOC emissions control. The plant fuel handling system consists of two truck tippers, fuel hoggers, 30-day storage, two under pile re-claimers, two plant feed conveyers and two portable fuel hoppers.

 Full Notice-to Proceed was received on May 11, 2012. Scheduled completion of the plant is in December 2014.

Page 15: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

      

 

      

CPV Sentinel Energy Project  

Owner: CPV Sentinel, LLC  

Location: Desert Hot Springs, CA  

EPC Contractor: Gemma Power Systems California, Inc.  

Design Engineer: Mott MacDonald Inc.  

The CPV Sentinel Energy Project (CPVS) is a nominally-rated 850 megawatt (MW) electrical generating facility based on eight natural gas-fired General Electric (GE) LMS100 combustion turbine generators (CTGs) operating in simple-cycle mode. The project will supply quick-start peaking capacity, energy, and ancillary services into the California Independent System Operator’s (CAISO) Los Angeles Basin Local Capacity Requirement (LCR) Area. The plant will be equipped with Selective Catalytic Reduction (SCR) and Carbon Monoxide (CO) equipment to reduce plant emissions of NOx and CO. In addition, the plant will utilize a Zero Liquid Discharge System to eliminate all liquid waste water discharge from the site.

 Notice-to-Proceed was received on May 26, 2011 and the plant is scheduled to be completed in July 2013.

Page 16: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

                                       

Canton Solar Energy Facility  Customer: Southern Sky Renewable Energy Canton, LLC  Location: Canton, MA  EPC Contractor: Gemma Renewable Power, LLC  Owner: Southern Sky Renewable Energy, LLC  The Canton Solar Energy Facility consists of 20,000 ground mounted photovoltaic panels with a total generation output of 5.7 MW. The project is located on the capped and closed Canton Landfill, with power being supplied to the Town of Canton under a long term agreement.

 

 Gemma Renewable Power’s EPC scope of work included the design coordination, procurement and installation of the ground mounted photovoltaic panels, along with the associated power conversion and interconnection facilities.

 

 Commercial operation of the facility was achieved on August 3, 2012.

Page 17: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Bishop Hill Wind Energy Center  

Customer: Bishop Hill Wind, LLC  

Location: Henry County, Illinois  

EPC Contractor: Gemma Renewable Power, LLC  

Owner: Invenergy Wind, LLC  

The 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW XLE 100m towers, 49 are equipped with 100m rotors – making Bishop Hill the first project in the United States to utilize such technology.

 

 Gemma’s EPC scope of work included the installation of roads, foundations, collection system, substation build-out and the erection of the 133, GE 1.6 and 1.5 MW Wind Turbine Generators.

 

 Foundation work was completed in the fall of 2011, with turbine erection in spring of 2012. Commercial operation of the facility was achieved in July 2012.

Page 18: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Middletown Repowering Project  

 Customer: Gen-Conn Middletown, LLC

Location: Middletown, Connecticut

Construction Contractor: Gemma Power Systems, LLC

Design Engineer: Sigma Energy Solutions

The project consists of the addition of four GE LM6000 PC Sprint dual fuel gas turbines, exhaust systems with SCR and CO catalysts and associated balance-of-plant. The gas turbines will be operated in a simple cycle mode to provide short-term “peaking” power to the grid during periods of high demand. The aggregate generating capacity of the four units is a nominal 193 MW net.

 The plant also features an aqueous ammonia storage tank and 1,000,000 gallon fuel oil storage tank with a common fuel oil and ammonia truck unloading facility.

 GPS was responsible for the complete construction, start-up and commissioning of the new power plant up to the low voltage side of the generator step-up (GSU) transformers. Notice to proceed occurred on May 25, 2010 with substantial completion achieved on June 10, 2011.

Page 19: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Colusa Generating Station Project  

 Customer: Pacific Gas and Electric Company

 Location: Maxwell, California

 EPC Contractor: Gemma Power Systems California, Inc.

 Design Engineer: WorleyParsons Group

 Colusa Generating Station consists of (2) combustion turbines, (2) heat recovery steam generators, a steam turbine and other BOP systems and facilities for a complete fully operational 640 MW combined cycle facility.

 The facility is classified as Zero Liquid Discharge, including a water treatment system and air- cooled condenser for cooling water.

 Gemma’s EPC scope of work included complete plant design and construction from site development through substation and electrical interconnection. Commercial operation was achieved in December 2010.

Page 20: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Vantage Wind Energy Project  

Customer: Vantage Wind Energy, LLC  

Location: Ellensburg, Washington  

EPC Contractor: Gemma Renewable Power, LLC  

Owner: Invenergy Wind, LLC  

Gemma Renewable Power began construction on the Vantage Wind Farm in September of 2009. Vantage entailed the installation of 60, GE 1.5 MW SLE turbines, 18 miles of roads, 115,000 feet of collection system trenching, 3.2 miles of transmission line and the construction of a new substation. Gemma self-performed all of the foundation installation, turbine erection, tower wiring, electrical collection system installation and substation construction necessary for the completion of the project.

 

 Gemma completed the Vantage Wind Energy Project ahead of schedule in September of 2010.

Page 21: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Grand Ridge Wind Energy Center  

Customer: Grand Ridge Energy, LLC  

Location: LaSalle County, Illinois  

EPC Contractor: Gemma Renewable Power, LLC  

Owner: Invenergy Wind, LLC  

 Gemma Renewable Power began construction of Phases 2 & 3 of the Grand Ridge Wind Farm in October 2008. The combined phases required the installation of 67 GE 1.5 MW SLE turbines, 18 miles of roads, over 300,000 feet of collection system trenching and the expansion of an existing substation. Three months into construction an additional 7 GE turbines were added to Gemma’s scope for Phase 4 of the project bringing the total energy output to 111 MW.

 Gemma self-performed the foundation installation, turbine erection and all substation work for the Grand Ridge Wind Farm. Gemma completed the project in October of 2009 followed by commercial operation in November of 2009.

Page 22: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

A.L. Pierce Repowering Project

Customer: Connecticut Municipality Electric Energy Cooperative

Location: Wallingford, CT

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Careba Power Engineers, LLC  

The CMEEC A.L. Pierce Repowering Project consists of one simple cycle GE 7EA combustion turbine relocated to an existing building after four years of storage.

 Gemma’s scope of work included complete plant design, site demolition, development, equipment installation, existing building enhancements, electrical interconnection, start-up and commissioning.

 Demolition began in late October 2006 and substantial completion was achieved in October 2007.

Page 23: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Roseville Energy Park  

Owner: Roseville Electric  

Location: Roseville, California  

EPC Contractor: Gemma Power Systems California, Inc.  

Design Engineer: WorleyParsons Group  

The Roseville Energy Park project is a 160 MW combined-cycle power generating facility based upon an SWPC power island consisting of two Siemens Westinghouse SGT-800 turbines, duct- fired, two pressure non-reheat HRSG’s and a non-reheat axial exhaust steam turbine. The project also includes a Zero Liquid Discharge system for processing of plant wastewater as well as generation of demineralized water.

 Gemma’s EPC scope of work included complete plant design, equipment procurement, construction and start-up/commissioning responsibility.

 Construction began in August 2005 with substantial completion achieved in October 2007.

Page 24: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Brayton Point Power Station  

Owner: Dominion Energy Brayton Point, LLC  

Location: Somerset, Massachusetts  

EPC Contractor: Gemma Power Systems, LLC  

Designer / Engineer: Progress Materials Inc. / ESI of Tennessee, Inc.  

The Ash Reduction Project (ARP) consists of a fluidized bed combustor facility which processes 42 tons of high carbon feed fly ash per hour. The ARP reduces the feed fly ash carbon content allowing the resultant product fly ash to be marketed as a concrete constituent.

 Gemma’s scope of work included the complete engineering, procurement, construction, start-up and commissioning of the project facilities, which include, in addition to the combustor facility, a 164’ diameter product ash storage dome, a remote truck load-out station, and extensive interconnects to the existing plant.

 Construction began February 2005 and was completed July 2006.

Page 25: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

La Rosita SCR Project  

Owner: Energía Azteca X (Intergen)  

Location: La Rosita Power Plant, Mexicali, Baja California, Mexico  

Contractor: Gemma Power Systems, LLC  

Design Engineer: Bechtel  

Gemma’s project scope consisted of the installation of three Selective Catalytic Reduction (SCR) systems for NOx control on three existing and operating HRSG’s at the 1,065 MW combined cycle La Rosita Power Plant in Mexicali, BC, Mexico. The project also included the installation of three new CEMS systems and a common Anhydrous Ammonia unloading and storage system, plus all associated foundations, equipment, piping and pipe supports, instrumentation, integration to the existing plant DCS, power supply, and related services.

 Gemma mobilized in January 2004. The common Anhydrous Ammonia services and SCR installation for Unit C were completed on March 3, 2004 as scheduled. SCR for units B & A were completed January 2005.

Page 26: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Rowan County Power Project  

Owner: Rowan County Power, LLC (a Progress Energy company)

 Location: Salisbury, North Carolina

 EPC Contractor: Gemma Power Systems, LLC

 Design Engineer: Parsons Energy & Chemicals Group

 The Rowan County power project is a 525 MW two on one combined cycle power island. The combustion turbines are General Electric 7-FA units. The HRSGs were supplied by Nooter/Eriksen and the190 MW steam turbine was supplied by Toshiba.

 Gemma’s EPC scope of work included complete plant design and construction from site development through electrical interconnection and initial plant operations.

 Construction began in November 2001 and commercial operation was achieved in May 2003.

Page 27: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Hines PB-2 Power Project  

Owner: Progress Energy  

Location: Bartow, Florida  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Parsons Energy & Chemicals Group  

The Hines Power Block II project is a combined cycle plant based upon an SWPC power island consisting of two Siemens Westinghouse 501-F combustion turbines, Vogt-NEM HRSGs, and a Siemens steam turbine generator.

 Gemma’s EPC scope of work included complete plant design and construction from site development through substation and electrical interconnection.

 Construction began in February 2002 and commercial operation was achieved in December 2003.

Page 28: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Effingham County Power Project  

Owner: Effingham County Power, LLC (a Progress Energy Company)

 Location: Rincon, Georgia

 EPC Contractor: Gemma Power Systems, LLC

 Design Engineer: Parsons Energy & Chemicals Group

 The Effingham County power project is a 525 MW two on one combined cycle power plant. The combustion turbines are General Electric 7FA units. The HRSGs were supplied by Nooter/Eriksen and the190 MW steam turbine was supplied by Toshiba.

 Gemma’s EPC scope of work included development support, complete plant design and construction from site development through substation and electrical interconnection, and included the off-site gas metering station.

 Construction release occurred on February 1, 2002 and commercial operation was achieved in August 2003.

Page 29: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

DeSoto County Power Project  

Owner: DeSoto County Power (a Progress Energy Company)

 Location: Arcadia, Florida

 EPC Contractor: Gemma Power Systems, LLC

 Design Engineer: Careba Power Engineers

 The DeSoto County power project is a peaking plant consisting of (2) General Electric 7FA, dual fuel combustion turbines equipped with inlet fogging systems for power enhancement.

 Gemma’s EPC scope of work included complete plant design and construction, from site development through substation and electrical interconnection.

 Construction began in July 2001 and substantial completion was achieved in April 2002.

Page 30: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Vandolah Power Project  

Owner: El Paso International Company  

Location: Wachula, Florida  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Parsons Energy & Chemicals Group  

The Vandolah power project is a peaking plant consisting of four General Electric 7-FA, dual fuel combustion turbines.

 Gemma’s EPC scope of work included complete plant design, site development, equipment installation, fuel off-loading and storage facilities, administrative building, electrical interconnection, start-up, commissioning and performance testing.

 Construction began in June 2001 and substantial completion was achieved in May 2002.

Page 31: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Richmond County Phase II Power Project  

Owner: Progress Energy  

Location: Hamlet, North Carolina  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Parsons Energy & Chemicals Group  

The Richmond County Phase II power project is a 525 MW two on one combined cycle power island and a 178 MW simple cycle power island. All three combustion turbines are General Electric 7-FA units. The HRSGs were supplied by Nooter/Eriksen, and the190 MW steam turbine was supplied by Toshiba.

 Gemma’s EPC scope of work included complete plant design and construction from site development through electrical interconnection.

 Construction began in October 2000 and substantial completion was achieved in June 2002.

Page 32: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Larkspur Energy Facility  

Owner: Larkspur Energy, LP (an InterGen North America Company)

 Location: Otay Mesa, California

 EPC Contractor: Gemma Power Systems, LLC

 Design Engineer: Vanderweil Engineers

 The Larkspur Energy Facility is a peaking plant consisting of two General Electric LM-6000 combustion turbines equipped with SCR systems for emissions control.

 Gemma’s EPC scope of work included project development support along with complete plant design and construction from site preparation through substation and electrical interconnection.

 Construction began in April 2001 and substantial completion was achieved on July 13, 2001.

Page 33: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Indigo Energy Facility  

Owner: Wildflower Energy, LP (an InterGen North America Company)

 Location: North Palm Springs, California

EPC Contractor: Gemma Power Systems, LLC

Design Engineer: Vanderweil Engineers

The Indigo Energy Facility is a peaking plant consisting of three (3) General Electric LM-6000 combustion turbines equipped with SCR systems for emissions control.

 Gemma’s EPC scope of work included project development support, along with complete plant design and construction, from site preparation through substation and electrical interconnection.

 Construction began in April 2001 and substantial completion of the first two of three units was achieved on July 25, 2001.

Page 34: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Richland Peaking Project  

Owner: First Energy  

Location: Defiance, Ohio  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Bibb and Associates  

The Richland Peaking Plant is based upon three ABB 11N2 simple cycle gas turbines with a combined power output of 375 MW.

 Gemma’s EPC scope of work included complete plant design and construction from site development through electrical interconnection.

 Construction began in December 1999. The first two units were completed in May/June 2000 and substantial completion of the entire project was achieved on schedule in November 2000.

Page 35: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Monroe Power Project  

Owner: Monroe Power, LLC (a Progress Energy Company)

 Location: Monroe, Georgia

 EPC Contractor: Gemma Power Systems, LLC

 Design Engineer: Parsons Energy & Chemicals Group

 The Monroe Power project is a peaking plant consisting of two, Westinghouse 501 F dual fuel combustion turbines along with fuel off loading and storage facilities, administrative building, and electrical interconnection.

 Gemma’s EPC scope of work included complete plant design and construction from site development through electrical interconnection and initial plant operations.

 Construction took place in two phases. The first was constructed in 4 ½ months during 1999 and the second in 2001.

Page 36: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Broad River Energy Center  

Owner: SkyGen Energy  

Location: Gaffney, South Carolina  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Simons Engineering

The Broad River Energy Center consists of three GE 7-FA simple cycle combustion turbines.

Gemma’s role as General Contractor included foundations, underground mechanical and electrical work, heavy hauling, equipment installation, all mechanical and electrical work through interconnection, and start-up and commissioning.

 Construction began in December 1999 and mechanical completion was achieved in early May 2000.

Page 37: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Rocky Road Unit No. 4 Power Project  

Owner: Dynegy Power Corporation  

Location: East Dundee, Illinois  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Bibb and Associates  

Rocky Road Unit No. 4 is a Westinghouse 501 D simple cycle peaking plant.  

Gemma’s scope of work included plant design, site development, equipment installation, and electrical interconnection.

 Construction began in December 1999 and substantial completion was achieved in June 2000.

Page 38: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Rockford Peaking Project  

Customer: Indeck Energy Services, Inc.  

Location: Rockford, Illinois  

EPC Contractor: Gemma Power Systems, LLC  

Design Engineer: Doyen and Associates  

The Rockford Peaking Project consists of two simple cycle Siemens-Westinghouse V 84.3a combustion turbines.

 Gemma’s scope of work included complete plant design, site development, equipment installation, control building, electrical interconnection, start-up and commissioning.

 Construction began in late January 2000 and substantial completion was achieved in June 2000.

Page 39: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

PPoowweerr EExxppeerriieennccee  

 

                                       

Dighton Power Project  

Owner: Dighton Power Associates  

Location: Dighton, Massachusetts  

EPC Contractor: Parsons / Gemma Power Systems, LLC  

Design Engineer: Parsons Energy & Chemicals Group  

The Dighton Power Partners project is a 165 MW combined-cycle power plant based upon an ABB 11N2 single shaft gas turbine and an ABB steam turbine coupled to a common generator. The plant is equipped with a Nooter/Eriksen HRSG and utilizes an air cooled condenser for steam condensation.

 Gemma served as the project EPC contractor responsible for all aspects of site construction.

Page 40: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

BBiiooFFuueellss EExxppeerriieennccee  

 

                                       

Port Neches Project  

Customer: Renewable Biofuels

Location: Port Neches, Texas

EPC Contractor: Gemma Power, Inc.

Design Engineer: Careba Mott MacDonald and Demar Engineering  

 RBF Port Neches BioDiesel Project is a production facility capable of producing 180 million gallons per year of biodiesel. The process design is based upon a continuous process that pre- treats feed stocks to allow maximum production flexibility.

 Gemma’s scope included supporting the process design, detail engineering, procurement, construction and startup of all systems. The project mobilized on site in July of 2007 and reached substantial completion in December of 2008 for the first train. The second train reached substantial completion in March of 2009.

Page 41: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

BBiiooFFuueellss EExxppeerriieennccee  

 

                                       

Green Earth Fuels Project  

Customer: Green Earth Fuels Houston, LLC  

Location: Galena Park, Texas  

EPC Contractor: Gemma Power, Inc.  

Design Engineer: Careba Power Engineers, LLC  

GEF Houston BioDiesel Project is a production facility capable of producing 40 million gallons of biodiesel per year. The process design is based upon a batch-continuous production using refined soybean oil with possible free fatty acids up to 4% and palm oil.

 Gemma’s scope included supporting the process design, detail engineering, procurement, construction and startup of all systems. Project completion occurred during the summer of 2007.

Page 42: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

BBiiooFFuueellss EExxppeerriieennccee  

 

                                       

Galena Park Project  

Owner: Organic Fuels

Location: Galena Park, Texas

EPC Contractor: Gemma Power, Inc.

Design Engineer: Careba Power Engineers  

Process Engineer: Organic Fuels  

The Galena Park facility has the capability of producing 30 million gallons of biodiesel annually from either high-grade soybean oil or yellow grease. The biodiesel plant consists of a batch sequence up front and a continuous distillation process on the back end. The continuous process yields 90% return on the methanol and water used in the batch process at the same time recovering glycerin formed during the production of biodiesel.

 Gemma’s scope of work included plant design, equipment procurement, complete construction and operator training. This facility was completed in early 2006.

Page 43: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

BBiiooFFuueellss EExxppeerriieennccee  

 

                                       

Carleton Ethanol Facility  

Customer: Altra Nebraska, LLC  

Location: Carleton, Nebraska  

EPC Contractor: Gemma Power Systems, LLC

Design Engineer: Delta-T Corp. / FB&D

Process Engineer: Delta-T Corp.

The Carleton Facility has the capability of producing over 100 MMGPY of fuel-grade anhydrous ethanol from corn, and dry distillers grains with solubles (DDGS) as a co-product, using a dry mill process. Gemma’s scope included the complete engineering, procurement, construction, and start-up of the facility.

 Project construction was suspended in November of 2007 at sixty percent completion.

Page 44: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

 

 

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

 

 RAVENBROOK LANDFILL SOLAR PROJECT

SSRE Ravenbrook Carver, MA

 2013 PV 6

6 MW(DC) Ground Mounted Solar PV

 HOWARD WIND FARM EXPANSION

EverPower Wind Holdings, Inc. Steuben County, NY

 2012 WND 4.10

2 REpower 2.05 MM92 78.5m WTGs

 PATTON WIND FARM

EverPower Wind Holdings, Inc. Patton, PA

15 Gamesa 2.0 MW G97 78m & 90m 2012 WND 30 WTGs

 ETEC WOODVILLE RENEWABLE POWER PROJECT

East Texas Electric Cooperative Woodville, TX

49.9 MW Wood-Fired Power Plant 2014 SF 50 Shin Nippon Steam Turbine Generator

Riley Power Stoker Boiler with Multi- Pollutant Emissions Control

 

 CPV SENTINEL ENERGY PROJECT

Competitive Power Ventures Desert Hot Springs, CA

8 GE LMS100 Gas Turbines with 2013 PK 800 Exhaust & Emission Control

 CANTON SOLAR ENERGY FACILITY

SSRE Canton Canton, MA

 2012 PV 6

6 MW(DC) Ground Mounted Solar PV

 BISHOP HILL WIND ENERGY CENTER

Invenergy Wind Henry County, IL

99 GE 1.6 MW XLE and 34 GE 1.5 2012 WND 200 MW XLE WTGs

 MIDDLETOWN REPOWERING PROJECT

GenConn Middletown LLC Middletown, CT

4 GE LM6000 Turbines with Exhaust 2011 PK 200 & Emission Control

 COLUSA GENERATING STATION

PG&E Maxwell, CA

2x1 GE Frame 7FA Gas Turbines, Air- 2010 CC 660 Cooled Condenser

 VANTAGE WIND ENERGY PROJECT

Invenergy Wind Vantage, WA

 2010 WND 90

60 GE 1.5 MW SLE WTGs

 GRAND RIDGE WIND ENERGY CENTER

Invenergy Wind LaSalle County, IL

 2009 WND 100

67 GE 1.5 MW SLE WTGs

 A.L. PIERCE REPOWERING PROJECT

CMEEC Wallingford, CT

 2007 PK 84

1 GE Frame 7EA Peaker Facility

 

 Legend:

 

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 45: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

 

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

 

 ROSEVILLE ENERGY PARK

Roseville Electric Roseville, CA

 2007 CC 160

2x1 160 MW SWPC GTX 100 Units

 

BRAYTON POINT STATION ASH REDUCTION PROJECT

Dominion Energy, Brayton Point LLC Somerset, MA

Fluidized Bed Combustor-based 2006 POL Carbon Reduction System for Fly Ash

Processing

 LA ROSITA POWER FACILITY

Energia Azteca X (Intergen) Mexicali, B.C., Mexico

Installation of SCR, CEMS and 2005 POL 1065 Anhydrous Ammonia System on 3

SWPC 501F Units  

ROWAN COUNTY POWER LLC Progress Energy Ventures Salisbury, NC

 2003 CC 511

2x1 GE Frame 7FA

 HINES PB-2 ENERGY FACILITY

Florida Power Corporation Bartow, FL

 2003 CC 530

2x1 SWPC 501F

 EFFINGHAM POWER PROJECT

Progress Energy Ventures Rincon, GA

 2003 CC 525

2x1 GE Frame 7FA

 DESOTO ENERGY FACILITY

Progress Energy Ventures DeSoto County, FL

 2002 PK 300

2 GE Frame 7FA Peaker Facility

 VANDOLAH POWER PROJECT

El Paso Energy Vandolah, FL

 2002 PK 640

4 GE Frame 7FA Peaker Facility

 RICHMOND ENERGY CENTER (Phase II)

Carolina Power & Light Hamlet, NC

2x1 GE Frame 7FA CC plus 2002 CC/PK 650 1 GE Frame 7FA Peaker Toshiba

STG ,N/E HRSG  

LARKSPUR ENERGY FACILITY Larkspur Energy LP (InterGen) Otay Mesa, CA

 2001 PK 80

2 GE LM6000 Peaker Facility

 INDIGO ENERGY FACILITY

Wildflower Energy LP (InterGen) North Palm Springs, CA

 2001 PK 120

3 GE LM6000 Peaker Facility

 RICHMOND ENERGY CENTER (Phase I)

General Electric Hamlet, NC

 2001 PK 920

4 GE Frame 7FA Peaker Facility

   

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 46: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

  

MONROE POWER PROJECT – PHASE II Carolina Power & Light Monroe, GA

 2001

 PK

 160

 

 

1 Westinghouse 501F Peaker Facility

 

BROAD RIVER ENERGY CENTER General Electric Gaffney, SC

 2000

 PK

 500

 

 

3 GE Frame 7FA Peaker Facility

 

RICHLAND PEAKING PROJECT First Energy (MidAtlantic) Defiance, OH

 2000

 PK

 390

 

  3 ABB GT11N2 Peaker Facility

 

ROCKY ROAD UNIT #4 Dynegy Power Corporation East Dundee, IL

 2000

 PK

 116

 

  1 Westinghouse 501D5A Peaker Facility

 

ROCKFORD ENERGY CENTER. Indeck Energy Services, Inc. Rockford, IL

 2000

 PK

 308

 

 

2 Siemens–Westinghouse V84.3a Peaker Facility

 

MONROE POWER PROJECT – PHASE I Carolina Power & Light Monroe, GA

 1999

 PK

 160

 

  1 Westinghouse 501 F Plant Engineering

 

DIGHTON POWER VENTURE Dighton Power Associates Dighton, MA

 1998

 CC

 170

 

  ABB GT11N2 GTG single-shaft with ABB VAX STG Nooter/Eriksen HRSG

  

BioFuels Plants  

  

Project/Client/Location

 

Yea

r C

om

ple

ted

 

Typ

e

 

Siz

e (M

GY

)

 

EP

C

 

Co

nst

ruct

ion

   

Project Description

 

PORT NECHES PROJECT Renewable BioFuels Port Neches, TX

 2009

 BD

 180

 

  Pre-Treated Feed Stock Continuous Process Design

 

GREEN EARTH FUELS PROJECT Green Earth Fuels Houston LLC Galena Park, TX

 2007

 BD

 40

 

  Feed Stock: Refined Soybean Oil and Palm Oil Batch-Continuous Production

 

GALENA PARK PROJECT Organic Fuels Galena Park, TX

 2006

 BD

 30

 

  Feed Stock: High Grade Soybean Oil or Yellow Grease Batch Sequence and Continuous Distillation Process

 

  

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 47: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

  

CARLETON ETHANOL FACILITY Altra Nebraska, LLC Carleton, NE

 N/A*

 ET

 100

 

  Feed Stock: Corn Dry Mill Process

 

*Construction of Plant Suspended

 

 

Additional Gemma Management Experience  

DAYTON POWER & LIGHT Dayton Power & Light Dayton, OH

 PK 83 GE Frame 7EA Peaker Facility

 CARSON COGENERATION PLANT

Carson Energy Group Elk Grove, CA

 CC 95

2x1 GE LM6000 ABB 12 MW STG and Deltak HRSGs

 INDECK ENERGY

Indeck Energy Corinth, NY

 CC 126

1x1 GE Frame 7EA Nooter/Eriksen HRSGs

 KES JAMAICA

Quixx Corp/Kenetech Energy Systems, Inc. Montego Bay, Jamaica

 PK 42

2 United Technologies FT-8 Peaker Facility

 ONONDAGA COGEN

Energy Initiatives Onondaga, NY

 CC 80

2x1 Combined Cycle with 1 GE LM5000 and 1 LM2500

 NORTH TONAWANDA COGEN

Oxbow Power North Tonawanda, NY

1x1 GE Frame 6 with CC 55 ATS HRSG and 17 MW STG

 MULBERRY COGEN FACILITY

Polk Power Partners Bartow, FL

1x1 GE Frame 7EA CC 120 GE 40 MW STG and

Foster Wheeler HRSG  

AG ENERGY FACILITY Sithe Energy Ogdensburg, NY

GE LM6000 and LM2500 GTGs CC 80 ABB 12 MW STG

GE 30MW STG  

CHATEAUGAY POWER PLANT KES Chateaugay, L.P. and CMS Gen. Co.

Wood Fired Power Plant SF 18 17.8 MW GE STG

Riley Stoker Boiler  

RYEGATE POWER STATION Ryegate Wood Energy Ryegate, VT

 SF 22

Wood Fired Power Plant GE 21.5 MW STG Riley Stoker Boiler

   

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 48: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

 

 FITCHBURG POWER PLANT

KES Fitchburg, L.P. and American Tractebel Corp. Westminster, MA

 SF 17

Wood Fired Power Plant GE 16.5 MW STG Riley Stoker Boiler

 OYSTER CREEK COGEN PLANT

Destec Energy, Inc. Freeport, TX

 CC 420

3x1 GE Frame 7EA GTGs 3 Vogt HRSGs

 FORT ORANGE COGEN PROJECT

Cogen Energy Tech., Inc. Castleton-on-Hudson, N.Y.

 CC 65

1x1 GE Frame 6 GTG GE 25 MW STG Deltak HRSG

 DARTMOUTH POWER

Dartmouth Power Association North Dartmouth, MA

1x1 GE Frame 6 GTG CC 67 ATS HRSG

30 MW STG  

O’BRIEN NEWARK COGEN O’Brien Environ. Energy Newark, NJ

1x1 John Brown (GE) Frame 6 CC 52 GE Ahlstrom 18 MW STG

Deltak HRSG Major Fire Rebuild

 KAMINE DEVELOPMENT CORP.

Kamine Development Corp. Gouverneur, NY

 CC 56

1x1 GE Frame 6 GTG GE 19 MW STG Deltak HRSG

 BURROUGHS WELLCOME COGEN

Burroughs Wellcome Greenville, NC

1 Allison 501K CTG and HRSG PK 4

 PEABODY MUNICIPAL LIGHT PLANT

Peabody Municipal Light Peabody, MA

 PK 30

1 GE LM5000 Peaking Facility

 KES KINGSBURG, L.P.

Kenetech Energy Systems Kingsburg, CA

 CC 35

1 x 1 GE LM 2500 GTG 11.5 MW IMO STG Zurn HRSG

 CARTHAGE COGEN

Kamine-Besicorp Carthage, NY

 CC 56

1x1 GE Frame 6 GTG 16 MW STG

 SOUTH GLENS FALLS COGEN

Kamine-Besicorp South Glens Falls, NY

1x1 GE Frame 6 GTG CC 50 10 MW STG

 TENASKA III, INC.

Tenaska III, Inc. Paris, TX

2x1 GE FRAME 7EA GTGs CC 250 2 Deltak HRSG’s

GE 90 MW STG    

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 49: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

 

 CAMP LEJEUNE POWER

USMC Jacksonville, NC

Retro-Fit Project SF 4 x100 kpph Coal Fired Boilers Addition

of a 100 kpph Package Boiler, Building Upgrades, Controls

 HARTFORD STEAM

O’Brien Energy Systems Hartford, CT

2x1 GE LM2500 GTGs CC 54 2 HRSGs

6 MW Shin Nippon STG  

CITIZENS UTILITIES COMPANY Citizens Utilities Co. Nogales, AZ

 PK 45

3 GE Frame 5 Peaking Facility

 PFIZER COGENERATION FACILITY

Pfizer, Inc. Adams, MA

1 Cooper-Bessemer LSVB-16-GDT PK 5 diesel with SCR

 HARTFORD HOSPITAL

CCF-1 Hartford, CT

2x1 Allison 571-K GTGs CC 16 2 HRSGs, 4 MW STG

6000 Ton Chiller Plant  

HIGH SIERRA COGEN Power Systems Eng. (Destec) Bakersfield, CA

2x1 GE LM2500/STIG 40 GTGs CC 49 2 Deltak HRSGs

200 KPPH Steam  

ELIZABETHTOWN COGEN Cogentrix Elizabethtown, NC

Foster Wheeler Fluid Bed Boiler SF 33 GE 35 MW STG

70 KPPH Steam  

AGNEWS COGEN FACILITY Power Systems Eng. (Destec) San Jose, CA

1x1 GE LM2500 GTG CC 34 Shin Nippon 7.5 MW STG

Deltak HRSG, 100 KPPH Steam  

COGEN LYONDELL Power Systems Eng. (Destec) Channelview, TX

5x1 GE Frame 7E GTGs CC 550 GE 138 MW STG; 5 Vogt HRSGs;

1100 KPPH Steam  

WICHITA FALLS ENERGY COMPANY Wichita Falls Energy Co. Wichita Falls, TX

Explosion Rebuild PK 23 Dresser-Rand LM2500

 LUMBERTON COGEN

Cogentrix Lumberton, NC

Foster Wheeler Fluid Bed Boiler SF 33 GE 35 MW STG

70 KPPH Steam  

MEGAN-RACINE COGEN Megan-Racine Association Canton, NY

1x1 LM5000/STIG 120 GTG CC 50 Deltak HRSG

100 KPPH Steam    

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 50: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

 

 

 

 

 

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

 

 DECATUR COGEN

A.E. Staley Decatur, IL

2 Riley Stoker Fluid Bed Boilers SF 90 ABB 90 MW STG

250 KPPH Steam BOP Piping & Electrical

 C.R. WING COGEN

Power Resources, Inc. Big Spring, TX

2x1 GE Frame 7EA GTGs CC 242 Hitachi 75 MW STG

2 Deltak HRSGs 150 KPPH Steam

 SYRACUSE UNIVERSITY COGEN

Project Orange Assoc. L.P. Syracuse, NY

2x1 GE LM5000/STIG 80 GTGs CC 80 2 Deltak HRSG’s

450 KPPH Steam  

CHALK CLIFF LTD. Power Systems Eng. (Destec) Maricopa, CA

1 GE LM5000/STIG 80 GTG PK 49 Deltak HRSG

100 KPPH Steam  

MECKLENBURG WASTE TO ENERGY PLANT (2) 135 Ton/Day Trash Burning Boilers Charlotte, NC WE 5.5 5.5 MW Delaval STG

 

PLANTAS EOLICAS Charter Oak Energy Tilaran, Costa Rica

17 Kenetech 33 MVS WND 5 Wind Turbines

 PINCHER CREEK PHASE I & II

Kenetech Windpower Alberta, Canada

47 Kenetech 33 MVS WND 19.5 Wind Turbines

 PALM SPRINGS REPOWERING

Kenetech Windpower Palm Springs, CA

115 Kenetech 33 MVS WND 40.5 Wind Turbines

 NORTHERN STATES POWER PROJECT

Kenetech Windpower Buffalo Ridge, MN

73 Kenetech 33 MVS WND 25 Wind Turbines

 MONTEZUMA HILLS

Kenetech Windpower Rio Vista, CA

17 Kenetech 33 MVS WND 5 Wind Turbines

 TARIFA PROJECT

Kenetech Windpower Tarifa, Spain

90 Kenetech KVS 33 WND 30 Wind Turbines

 WEST TEXAS WINDPLANT

Kenetech Windpower Van Horne, TX

120 Kenetech KVS 33 WND 40 Wind Turbines

33 KV Collection System 138 KV Substation Interconnection

  

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 51: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

EExxppeerriieennccee MMaattrriixx Power Plants

Project DescriptionProject/Client/Location

 

 

Yea

r C

om

ple

te

Typ

e

Si z

e (M

W)

EP

C

Co

nst

ruct

ion

  

EMMSHAVEN WINDPLANT Kenetech Windpower Emmshaven, Netherlands

 WND

 30

 

 

70 Kenetech KVS 33 Wind Turbines

 

BRISTOL RESOURCE RECOVERY J.A. Jones Bristol, CT

 WE

 16

 

 

(2) 325 ton/day Zurn boilers 16 MW GE STG

 

                                              

Legend:  

CC – Combined Cycle SF – Sold Fuel PK – Peaking or Simple Cycle PV – Solar POL – Pollution Control WND – Wind ET – Ethanol WE – Waste to Energy BD – Bio-Diesel

Page 52: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

DDeevveellooppmmeenntt // CCoonnssuullttiinngg EExxppeerriieennccee MMaattrriixx

 

  

 Project / Client / Location Project Description

  

MOXIE ENERGY Bradford County, PA

Preliminary design, permitting support, performance analysis for 2 800+ MW combined cycle gas turbine power projects.

 

SOUTHERN SKY RENEWABLE ENERGY Boston, MA

Plant design and permitting support for a series of 6 MW ground mounted solar installations.

 UNIVERSITY OF CONNECTICUT

Storrs, CT

Design and system integration analysis for a 25 MW cogeneration and chiller plant to serve campus electric, heating, and cooling loads.

 

FLORIDA POWER CORP St Petersburg, FL

Preliminary design and equipment procurement for a 500 MW combined cycle expansion of the Hines Power Station.

 

PROGRESS ENERGY Raleigh, NC

Conceptual design and commercial evaluation of Air Cooled Condenser for 500 MW combined cycle power plant.

 

PROGRESS ENERGY Raleigh, NC

Acoustical impact modeling for 500 MW combined cycle power plant.

 

EFFINGHAM COUNTY POWER PLAN Rincon, GA

Technical support for land use, Corps of Engineers and air permitting of a combined cycle power plant.

 

CENTRAL CONNECTICUT STATE UNIVERSITY New Britain, CT

Design and performance modeling of a new campus energy center.

 

BP GLOBAL POWER Great Yarmouth, UK

Project Operations due diligence and support.

 CAROLINA POWER & LIGHT

Raleigh, NC

Conceptual design, performance modeling major equipment procurement for a series of 500 MW Combined-Cycle Power Projects.

 

TRINITY COLLEGE Hartford, CT

Energy consultant for the Trinity 2002 project.

 THE ENERGY NETWORK

Hartford, CT

Conceptual design, performance modeling and budgeting for a new energy center that is to become a cornerstone of Project Adriaen, a commercial redevelopment in Hartford, CT.

 THE ENERGY NETWORK

Hartford, CT

Technical advisor to TEN, the unregulated subsidiary of Connecticut Natural Gas in its successful acquisition of the Hartford Hospital cogeneration facility from KENETECH Energy Systems.

 

AETNA INSURANCE COMPANY Windsor, CT

Engineering, procurement and estimating services for a Data Center expansion including new emergency generation, UPS system, and cooling systems.

 LEARNING CORRIDOR /SINA

Hartford, CT

Responsible for the negotiation and implementation of an energy supply program involving the development of a new district heating and cooling system to serve four new educational facilities.

 

ILLINOVA GENERATING Decatur, IL

Technical due diligence evaluation of a 20 MW wind energy project in Costa Rica.

 

HARTFORD HOSPITAL Hartford, CT

Technical and commercial advisor for the restructuring of a 16 MW cogeneration project.

Page 53: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

DDeevveellooppmmeenntt // CCoonnssuullttiinngg EExxppeerriieennccee MMaattrriixx

 

 

  

UNC INDUSTRIAL POWER Odessa, TX

Technical direction and field supervision for the dismantling and relocation of two 22 MW FT-4 gas turbines and their associated control systems from Venezuela.

 

GE CAPITAL London, UK

Project development and fuel supply acquisition for a 56 MW combined cycle power plant in Dakar, Senegal.

 

ST PAUL INSURANCE Long Beach, CA

Casualty loss evaluation and claim negotiation of claims for damage to power generation equipment.

 

ERI SERVICES Hartford, CT

Technical due diligence for a power project located in Central America.

Page 54: Gemmaa Powerr Systems Gemmaa Renewable e … 200 MW Bishop Hill Wind Energy Center consists of 99, GE 1.6 MW XLE and 34, GE 1.5 MW XLE Wind Turbine Generators. Of the 99, GE 1.6 MW

OOppeerraattiioonnss && MMaaiinntteennaannccee EExxppeerriieennccee MMaattrriixx

 

Typ

e

MW

  

 Project/Client/Location Project Description

  

MONROE POWER PROJECT Carolina Power & Light Monroe, GA

 PK

 160

Westinghouse 501 F Peaking Power Facility

 

Additional Gemma Management Experience  

HARTFORD HOSPITAL ENERGY CENTER Hartford Hospital Medical Center Hartford, CT

 CHP

 16

Combined Heat and Power Facility Providing Heating, Chilled Water, and Power Requirements for a Large Medical Center

 

KES CHATEAUGAY BIOMASS FACILITY KES Chateaugay LLC Chateaugay, NY

 SF

 18

Wood Fired Power Plant GE 18 MW STG Riley Stoker Boiler

 

KES KINGSBURG, L.P. Kenetech Energy Systems Kingsburg, CA

 CC

 35

1 x 1 GE LM 2500 GTG 11.5 MW IMO STG Zurn HRSG

 

KES JAMAICA Quixx Corp/Kenetech Energy Systems, Inc. Montego Bay, Jamaica

 PK

 42

2 United Technologies FT-8 Peaker Facility

 

FORT ORANGE COGEN PROJECT Cogen Energy Tech., Inc. Castleton-on-Hudson, N.Y.

 CC

 65

1x1 GE Frame 6 GTG GE 25 MW STG Deltak HRSG

 

FITCHBURG POWER PLANT KES Fitchburg, L.P. and American Tractebel Corp. Westminster, MA

 SF

 17

Wood Fired Power Plant GE 16.5 MW STG Riley Stoker Boiler

 

KES PEPPERELL POWER PLANT KES Pepperell, LLC Pepperell, MA

 CC

 40

1 GE Frame 5 Power Facility Providing Power and Process Steam to an Operating Paper Plant.

 

CENTURY TOWER PROJECT Government Center New Haven, CT

 CHP

  Steam Boilers, Chillers and Thermal Storage System

            

Legend: CC – Combined Cycle WND – Wind PK – Peaking or Simple Cycle SF – Solid Fuel WE – Waste to Energy BD – BioDiesel ET – Ethanol CHP – Combined Heat and Power