Fully Split, FDA-Approved Ceramic Filled PTFE Hanger Bearings MECO 3120 is a malleable, bearing grade material that combines the wear resistance found in ceramics with the dry lubrication provided by PTFE. It is a dry-running, high performance bearing material made possible by incorporating a heavily-loaded ceramic fill in a high-end PTFE matrix. The result is a hanger bearing with the following attributes: • Low Coefficient of friction • High temperature capabilities • Toughness • More resilient then brittle, pure ceramic • High abrasion resistance • High load capacity • Low wear rates • Serviceable in a wet, dry or wet-dry environment • Suitable for a broad range of chemical environments • FDA-Approved material • Fully split • Available to ship in 1 to 3 days Woodex Bearing Company’s MECO 3120 is a complement to our traditional, fully split oil impregnated, rock maple “Woodex” hanger bearings. e back page lists our readily available standard stock sizes. Special requests are also available typically within 3-5 weeks. T YPICAL PHYSICAL PROPERTIES PROPERTY TEST VALUE UOM Tensile Strength ASTM D-4984 2586 psi Elongation ASTM D-4894 284 % Specific Gravity ASTM D-4745 2.19 g/cm 3 Wear Factor (K) X 10 10 1.0 In 3 -min/lb-ft-hr Coefficient of Friction Static @ 33 psi Dynamic @ 33 psi 0.20 .023 Deformation Under Load 73deg, 2000 psi 24hrs MD CD D-621 4.4 6.2 % Raw materials used in production of this product meet the FDA and USDA requirements for food contact applications. MECO - 3120 PV Guidelines Pressure (PSI) Velocity (Ft/min.) TYPE 226 TYPE 216