LED FEELUX Lighting, Inc. 3000 Northwoods Parkway #115 Norcross, GA 30071 U.S.A. Phone: (678) 668 7005 1 of 3 01/15 All Rights Reserved. 2015 - Feelux Lighting, Inc. NORTH AMERICA PRODUCT FEATURES • UltraS • Eliminates Multiple Imaging • Single Diode Provides SingleSharpShadow • High Lumen Package • Linkable Units • White, Silver, Black or Gold Trim Finishes Available • Millwork Recessed or Surface Mount • Dimmable with Accessories • Beam Angle: 60º • Finish: White, Silver, Black or Gold • Warranty: 5 year Warranty • • Voltage: 24VDC Constant Voltage Feelux or Approved Driver • Operating Temperature: 32-113ºF (0-45ºC) • Lamp Life: 40,000 hrs / 70% • Available Color: 2700K, 3000K, 4000K • Color Rendering: Ra > 80 • • IP20 Damp Location/Closet Approved DVS™ -Spot SPECIFICATION DIAGRAM PRODUCT SPECIFICATIONS DVS FIXTURE OPTIONS DimmingInterface 0-10V Option1: Cord & Plug /Feelux Driver s Option 2 : Hardwire /Feelux Driver Option 3: 3rd Party Drivers Driver Options Controls Opti ons FLC (15, 30 or 75) 24V/XL Dimming Options: 8 ft Power Cord XLD75-124V-F C 3rd party drivers are available to 600W. Please consult factory. NOTE: Options 2 & 3 require low voltage wi re to be provided by EC. Non-Dimming Options: 6 Port HUB 8 ft Power Cord OR 24VDC IN 6 Port HUB FDC-L10 = Spli ce point - Polarity must be followed Feelux Drivers require Dimming Interface FDC-L10 + + Inline Dimmer Flexible Connector Cable 0-10V Control + Splice + + OR 6 Port HUB Splice + + 6 Port HUB Forward Phase Dimming NDVDIM Integral Power Cable from SPOT Integral Power Cable from SPOT Integral Power Cable from SPOT MAX 7 Linkable Units On Single Power Feed Drivers Can Support Multiple Power Feeds TOTAL CONNECTED LOAD SHOULD NOT EXCEED DRIVER WATT S! FLX Spot SPECIFICATION GUIDE ALL PARTS NEEDEDFOR INSTALLATION WILLBE INCLUDED. FOR ADDITIONAL COMPONENTS ORDERSEPARATELY ON PAGE 2 Connect Linkable Spot DVS(A) to End Unit Spot DVS(B) Connect Linkable Spot DVS(A) to NDV Connect NDV to Linkable Spot DVS(A) or to End Unit Spot DVS(B) Connect to multiple End Unit Spots DVS(B) MODEL DVS4A - Linkable DVS4B - Non Linkable DRIVER COLOR 100V 120V 230V 277V TRIM/COLOR WT -White BK -Black GD -Gold SV -Silver CONTROLS DVS4_ QUANTITY CP - Cable/Plug HW - Hard Wire TD - 3rd Party Drivers Consult Factory Spot quantity powered together VOLTAGE MOUNTING RM - Recessed Mount SP - Spring Mount SR - Surface Mount NDM Non-Dim IDM Inline Dim FDC 0-10V Interface FPH Forward Phase 27K -2700 K 30K -3000 K 40K -4000 K LENS ST -Flat Frosted
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
PRODUCT FEATURES• Ultra S• Eliminates Multiple Imaging • Single Diode Provides Single Sharp Shadow• High Lumen Package• Linkable Units • White, Silver, Black or Gold Trim Finishes Available• Millwork Recessed or Surface Mount• Dimmable with Accessories
• Beam Angle: 60º
• Finish: White, Silver, Black or Gold• Warranty: 5 year Warranty•
• Voltage: 24VDC Constant Voltage Feelux or Approved Driver• Operating Temperature: 32-113ºF (0-45ºC)• Lamp Life: 40,000 hrs / 70%• Available Color: 2700K, 3000K, 4000K• Color Rendering: Ra > 80• • IP20 Damp Location/Closet Approved
DVS™ - Spot
SPECIFICATION DIAGRAM
PRODUCT SPECIFICATIONS
DVS
FIXTURE OPTIONS
Dimming Interface 0-10V
Option1:Cord & Plug /Feelux Drivers
Option 2:Hardwire / Feelux Driver
Option 3: 3rd Party Drivers
Driver Options Controls Options Fixture Options
FLC (15, 30 or 75) 24V/XL Dimming Options:
8 ft Power Cord
XLD75-124V-FC
3rd party drivers are available to 600W. Please consult factory.
NOTE: Options 2 & 3 require low voltage wire to be provided by EC.
Non-Dimming Options:
6 Port HUB
8 ft Power Cord
OR
24VDC IN
6 Port HUB
FDC-L10
= Splice point - Polarity must be followed
Feelux Drivers require Dimming Interface FDC-L10
+
+
Inline Dimmer
Flexible Connector Cable
0-10V Control
+
Splice
+
+
OR6 Port HUB
Splice
+
+
6 Port HUB
Forward Phase Dimming
NDVDIM
Integral Power Cable from SPOT
Integral Power Cable from SPOT
Integral Power Cable from SPOT
MAX 7 Linkable Units On Single Power Feed
Drivers Can Support Multiple Power Feeds
TOTAL CONNECTED LOAD SHOULD NOT EXCEED DRIVER WATTS!
FLX Spot
SPECIFICATION GUIDE ALL PARTS NEEDED FOR INSTALLATION WILL BE INCLUDED. FOR ADDITIONAL COMPONENTS ORDER SEPARATELY ON PAGE 2
Connect Linkable Spot DVS(A) to End Unit Spot DVS(B)
Connect Linkable Spot DVS(A) to NDV
Connect NDV to Linkable Spot DVS(A) or to End Unit Spot DVS(B)
Connect to multiple End Unit Spots DVS(B)
MODEL
DVS4A -LinkableDVS4B -Non Linkable
DRIVERCOLOR
100V120V230V277V
TRIM/COLOR
WT -WhiteBK -BlackGD -GoldSV -Silver
CONTROLS
DVS4_
QUANTITY
CP -Cable/PlugHW -Hard Wire TD -3rd Party Drivers Consult Factory
Spot quantity powered together
VOLTAGEMOUNTING
RM - Recessed MountSP -Spring MountSR -Surface Mount
NDMNon-DimIDM Inline Dim FDC0-10V Interface FPH Forward Phase