Page 1
A STUDY ON“CAPITAL BUDGETING ”
With reference to“PARADEEP PHOSPHATES LTD”
BHUBANESHWAR
A Project Report submitted to JNTU, KAKINADA in partial fulfillment for the award of the Degree of
MASTER OF BUSINESS ADMINISTRATION (MBA)Submitted By
GORU.SHYAM KUMAR.
Under the Esteemed Guidance ofMr. SRIRAM TRIPATHY
MIRACLE SCHOOL OF MANAGEMENT(AFFILIATED TO JNTU)
MIRACLE CITYMUNJERU (V)
BHOGAPURAM (M)VIZIANAGARAM (D.t)
2011-2013
1
Page 2
DECLARATION
I hereby declare that this project report “ CAPITAL BUDGETTING” with
reference to “PARADEEP PHOSPHATES Ltd,” has been prepared by me during the
period 06-05-2012 to 10-06-2012 is partial fulfillment of the requirement for the
award of degree of Master of Business Administration of J.N.T.U,KAKINADA.
I also declare that this project is a result of my own effort and that it has
not been submitted to any other university for the Award of Any Degree.
Place: VISAKHAPATNAM (Goru.Shyam Kumar)
Date:
2
Page 3
ACKNOWLEDGEMENT
A successful project can never be prepared by single effort or the person
to whom the project is assigned, but it also demand the help and guardianship
of some conversant persons who helps in the undersigned actively or passively
in the completion of successful project .
With great pleasure, I express my deep sense gratitude to the
management of “PARADEEP PHOSPHATES LIMITED”, BHUBANESHWAR for
giving me this very inspirational opportunity to do my observation study in their
reputed company to take this opportunity to express my deep and profound
gratitude to the people concerned who have helped me directly or indirectly in
successful completion of this project.
I convey my sincere thanks to Mr. M K MUKHERJEE Dy. General
Manager, (F &A), PPL who has motivated me with their valuable suggestion
and helped me throughout the project in permitting to perform various tasks in
this esteemed organization.
(GORU .SHYAM KUMAR)
3
Page 4
CONTENTS
CHAPTER-1 INTRODUCTION TO THE STUDY 1-11
CHAPTER-2 INDUSTRY PROFILE 12-22
CHAPTER-3 COMPANY PROFILE 23-29
CHAPTER-4 PROJECT PLANNING (CAPITAL BUDGETING) 30-57
CHAPTER-5 FINANCING OF THE PROJECT 58-60
CHAPTER-6 FINANCE AND ACCOUNTS SECTION AT PPL 61-64
CHAPTER-7 DATA ANALYSIS AND INTERPRETATION 65-67
CHAPTER-8 EVALUATION OF CAPITAL BUDGETING 68-79
CHAPTER-9 FINDINGS AND SUGGESTIONS 80
BIBLIOGRAPHY 81
4
Page 5
CHAPTER 1
INTRODUCTION
1.1 INTRODUCTION OF THE STUDY
Every organization irrespective of its size and mission can be viewed as a
financial entity management of an organization. Financial management
focuses not only on the improvement of funds but also on their efficient use
with the objective of maximizing the owners’ wealth. The allocation of funds
is therefore an important function of financial management. The allocation of
funds involves the commitment of funds to assets and activities.
There are two types of Investment decision:
1. Management of current assets or Working capital management.
2. Long term investment decision.
Long term investment decisions are widely known as capital budgeting or
capital expenditure budgeting. It means as to whether or not money should
be invested in long term project. This part is devoted to an in-depth and
comparative decision of capital budgeting/capital expenditure management.
A project is an activity sufficiently self- contained to permit financial and
commercial analysis. In most cases projects represent expenditure of capital
funds by pre- existing entities which want to expand or improve their
operation.
In general a project is an activity in which, we will spend money in
expectation of returns and which logically seems to lead itself to planning.
5
Page 6
Financing and implementation as a unit, is a specific activity with a specific
point and a specific ending point intended to accomplish a specific objective.
To take up a new project, involves a capital investment decision and it is the
top management’s duty to make a situation and feasibility analysis of that
particular project and means of financing and implementing it financing is a
rapidly expanding field, which focuses not on the credit status of a company,
but on cash flows that will be generated by a specific project.
Capital budgeting has its origins in the natural resource and infrastructure
sectors. The current demand for infrastructure and capital investments is
being fueled by deregulation in the power, telecommunications, and
transportation sectors, by the globalization of product markets and the need
for manufacturing scale, and by the privatization of government –owned
entities in developed and developing countries.
The capital budgeting decision procedure basically involves the evaluation of
the desirability of an investment proposal. It is obvious that the firm must
have a systematic procedure for making capital budgeting decisions.
The procedure must be consistent with the objective of wealth maximization.
In view of the significance of capital budgeting decisions, the procedure must
consist of step by step analysis.
1.2 Importance of investment decisions:-
Capital investments, representing the growing edge of a business, are
deemed to be very important for three inter- related reasons.
6
Page 7
1. They influence firm growth in the long term consequences capital
investment decisions have considerable impact on what the firm can do in
future.
2. They affect the risk of the firm; it is difficult to reverse capital investment
decisions because the market for used capital investments is ill organized
and /or most of the capital equipments bought by a firm to meet its specific
requirements.
3. Capital investment decisions involve substantial out lays.
“PARADEEP PHOSPHATES LIMITED” is a growing concern, capital budgeting is
more or less a continuous process and it is carried out by different functional
areas of management such a production, marketing, engineering, financial
management etc. All the relevant functional departments play a crucial role
in the capital budgeting decision process.
1.3 Objectives of the study:-
1. To describe the organizational profile of “PARADEEP PHOSPHATES Ltd”.
2. To discuss the importance of the management of capital budgeting.
3. Determination of proposal and investments, inflows and out flows.
4. To evaluate the investment proposal by using capital budgeting
techniques.
5. To summarize and to suggest for the better investment proposal.
1.4 SCOPE OF THE STUDY:-
7
Page 8
This study highlights the review of capital budgeting and capital expenditure
management of the company. Capital expenditure decisions require careful
planning and control. Such long term planning and control of capital
expenditure is called Capital Budgeting. The study also helps to understand
how the company estimates the future project cost. The study also helps to
understand the analysis of the alternative proposals and deciding whether or
not to commit funds to a particular investment proposal whose benefits are
to be realized over a period of time longer than one year. The capital
budgeting is based on some tools namely Payback period, Average Rate of
Return, Net Present Value, Profitability Index, and Internal Rate of Return.
1.5 METHODOLOGY:-
The information for the study is obtained from two sources namely.
1. Primary Sources
2. Secondary Sources
Primary Sources:
It is the information collected directly without any references. It is mainly
through interactions with concerned officers & staff, either individually or
collectively; some of the information has been verified or supplemented with
personal observation. These sources include.
a. Thorough interactions with the various department Managers of
“PARADEEP PHOSPHATES LTD”.
8
Page 9
b. Guidelines given by the Project Guide, Mr. SRIRAM TRIPATHY, Dy.
Manager, Budget Section, F & A.
Secondary Sources:
This data is from the number of books and records of the company, the
annual reports published by the company and other magazines. The
secondary data is obtained from the following.
a. Collection of required data from annual records, monthly records,
internal Published book or profile of “PARADEEP PHOSPHATES
LTD”.
b. Other books and Journals and magazines
c. Annual Reports of the company
1.6 Limitations:-
Though the project was completed successfully with a few limitations may .
a) Since the procedure and polices of the company will not allow to
disclose confidential financial information, the project has to be
completed with the available data given to us.
b) The period of study that is 6 weeks is not enough to conduct
detailed study of the project.
c) The study is carried basing on the information and documents
provided by the organization and based on the interaction with
the various employees of the respective departments.
1.7 REVIEW OF LITERATURE:-
9
Page 10
The concept of Capital Budgeting being a very sensitive area of finance has
outreached the attention of many researchers .A number of studies has been
conducted on the subject. However briefing such studies will highlight the
importance of the present study. It should safeguard to avoid the wrong
choice of the project and investment to be made. It is necessary for the
management to give proper attention to capital budgeting.
The reason for the popularity of Payback period in the order of significance
were stated to be its, simplicity to use and understand, its emphasis on the
early recovery of investment and focus on risk. It was also found that one
third of companies always insisted on the computations of Payback periods
for all projects. For about two-third companies standard Payback period
ranged between three and five years.
The reason for the secondary role of Discounted Cash Flow techniques in
India included difficulty in understanding and using these techniques, due to
lack of qualified professional and unwillingness of top management to use
Discounted Cash Flow techniques.
One large manufacturing and marketing organization mentioned that
conditions of its business were such that Discounted Cash Flow techniques
were not needed. Yet another company stated that replacement projects
were very frequent in the company and it was not considered necessary to
use Discounted Cash Flow technique for evaluating such projects.
The present investment appraisal in practice is raising certain questions in
the context.
1. How much importance is assigned to economic analysis of capital
expenditure in practice?
10
Page 11
2. What methods are used for analyzing capital expenditure in practice
and what is the reason for underlying these methods?
The answers of the above questions are based on a survey of twenty firms
varying on several dimensions like industry category, size, financial
performance and capital intensity. From these firms, executives, responsible
for capital investment evaluation and capital budget preparation were
interviewed
CHAPTER-2
INDUSTRY PROFILE
2.1 Introduction to Fertilizer Industry:
11
Page 12
Fertilizer is generally defined as "any material, organic or inorganic, natural
or synthetic, which supplies one or more of the chemical elements required
for the plant growth".
Since the essential physiological attribute of seeds is their ability to convert a
great duel of nutrients into grain. The spread of this variety lead for greater
consumption of fertilizers simultaneously with increasing demographic
pressure on the agricultural productivity has assumed more importance. This
also contributed to the rising demand for fertilizers.
Agriculture the backbone of Indian Economy still holds its relative importance
for more than a billion peoples. The Government of India from time to time
has taken considerable steps for the upliftment of Agriculture Sector. Here
we have analyzed the performance of Fertilizer Industry being one of the
vital parts in agricultural production and Government's policy initiatives for
the same.
Fertilizer in the agricultural process is an important area of concern. Fertilizer
industry in India has succeeded in meeting the demand of all chemical
fertilizers in the recent years. The Fertilizer Industry in India started its first
manufacturing unit of Single Super Phosphate (SSP) in Ranipet near Chennai
with a capacity of 6000 MT a year. Then established the first two large-sized
fertilizer plants, one was the Fertilizer & Chemicals Travancore of India Ltd.
(FACT) in Cochin, Kerala, and the another one was Fertilizers Corporation of
India (FCI) in Sindri, Bihar. These two were established as pedestal fertilizer
units to have self sufficiency in the production of food grains. Afterwards, the
industry gained impetus in its growth due to green revolution in late sixties,
followed by seventies and eighties when fertilizer industry witnessed an
incredible boom in the fertilizer production.
12
Page 13
Fertilizer consumption of plant nutrients per unit of grossed cropped area in
India is still very low average being 91.5 kg/ha. Productivity of food grain
crops in the country is also quite low, around 1.6 t/ha, which can certainly be
doubled by enhancing per unit average fertilizer use. Fertilizer consumption
has to increase substantially in order to achieve the food grain requirement
of 220 million tons by the year 2002.
2.2 Origin and Development of Fertilizers Industry in
INDIA :
The Indian fertilizer industry has succeeded in meeting almost fully the
demand of all chemical fertilizers except for MOP. The industry had a very
humble beginning in 1906, when the first manufacturing unit of Single Super
Phosphate (SSP) was set up in Ranipet near Chennai with an annual capacity
of 6000 MT. The Fertilizer & Chemicals Travancore of India Ltd. (FACT) at
Cochin in Kerala and the Fertilizers Corporation of India (FCI) in Sindri in
Bihar were the first large sized -fertilizer plants set up in the forties and
fifties with a view to establish an industrial base to achieve self-sufficiency in
food grains. Subsequently, green revolution in the late sixties gave an
impetus to the growth of fertilizer industry in India. The seventies and
eighties then witnessed a significant addition to the fertilizer production
capacity.
The Indian fertilizer industry has witnessed a phenomenal growth in the
eighties. However, the growth has tapered off in the nineties and in the
recent past only public and cooperative sectors have made major
investments in this industry. Presently public, private and coop. sector share
45, 33 and 22 percent of capacity, respectively, whereas their share in P2O5
capacity is 26, 64 and 10 per cent respectively. New proposals to
government for setting-up fresh capacities in country are mainly from Public
and Cooperative sectors.
13
Page 14
The installed capacity as on 30.01.2003 has reached a level of 121.10 lakh
MT of nitrogen (inclusive of an installed capacity of 208.42 lakh MT of urea
after reassessment of capacity) and 53.60 lakh MT of phosphatic nutrient,
making India the 3rd largest fertilizer producer in the world. The rapid build-
up of fertilizer production capacity in the country has been achieved as a
result of a favorable policy environment facilitating large investments in the
public, co-operative and private sectors.
Presently, there are 57 large sized fertilizer plants in the country
manufacturing a wide range of nitrogenous, phosphatic and complex
fertilizers. Out of these, 29 unit produce urea, 20 units produce DAP and
complex fertilizers 13 plants manufacture Ammonium Sulphate (AS), Calcium
Ammonium Nitrate (CAN) and other low analysis nitrogenous fertilizers.
Besides, there are about 64 medium and small-scale units in operation
producing SSP.
The sector experienced a faster growth rate and presently India is the third
largest fertilizer producer.
2.3 MAJOR SEGMENTS IN FERTILIZERS :
The Indian fertilizer industry is broadly divided into Nitrogenous, Phosphatic
and Potassic segments. In addition to these, nutrients are combined to
produce several complex fertilizers. To express the nutrient constitution of
fertilizers, the grade of a fertilizer is expressed as a set of three numbers in
the order of percent of Nitrogen (N), Phosphate (P), Potash (K) and
sulphur(S). The straight nitrogenous fertilizers produced in the country are
urea, ammonium Sulphate, calcium ammonium nitrate (CAN) and ammonium
chloride. The only straight phosphatic fertilizer being produced in Sector
Report: Fertilizer Industry India / Economics the country is SSP. The complex
fertilizers include DAP, several grades of Nitro phosphates and NPK
complexes. Urea and DAP are the main fertilizers produced indigenously.
14
Page 15
(a) Chart showing different types of fertilizers
2.4 DEMAND AND SUPPLY
The Demand-Supply scenario in fertilizers has been worked out by the
Working Group on Fertilizers for the Ninth Plan (1997-98 to 2001-02) on the
basis of the estimated demand and production projections in terms of N and
P2O5 nutrients (Table-2). The increase in production (supply) will be 4.86
million tons, most of it is confined to nitrogen resulting from the
commissioning of the expansions, new plants or joint ventures abroad.
Production of N is expected to increase from 9.7 million tons in 1997-98 to
25.0 million tons in 2007-08. The Group estimated that the available
phosphate supply will increase from 2.8 million tons of P2O5 in 1997-98 and
reach 7 million tons in 2007-08. The demand for N, P2O5, K2O has also been
estimated up to 2006-2007 (terminal year of tenth plan) at 16.35, 6.65 and
2.60 million tonnes, respectively.
15
Page 16
2.5 Pricing policy:
The fertilizer policy is aimed at increasing consumption to meet the food and
fiber requirement of growing population through setting up required
production capacities, ensuring that quality fertilizers are made available to
the farmers throughout the country at uniform and affordable price. It was
also recognized that fertilizer use should be profitable to the farmers for
which he must get a certain minimum return for the produce. This led to the
announcement of procurement prices and minimum support prices for
several crops from 1970 onwards. The Marathe Committee was assigned the
task of resolving the issue of keeping Farm Gate Prices (FGP) of fertilizers at
an affordable level in the face of rising production/import costs. Its
recommendations in 1977 led to the birth of the Retention Price Scheme
(RPS). This scheme was intended to ensure that both the fertilizer producers
as well as the farmers should find it worthwhile to produce and use
fertilizers. The policy aimed that each manufacturer is able to get 12% post-
tax return on investment on efficient operation regardless of the location,
age, technology and cost of production. In addition, the government agreed
to reimburse the cost of transportation from factory gate to railhead and also
take care of the distribution margin. The RETENTION PRICE SCHEME is now
restricted to urea only.
16
Page 17
2.6 Fertilizer subsidy :
The RPS system helped in achieving the objective of increased indigenous
availability and supplying it to farmers on affordable and uniform price. The
difference between FARM GATE PRICES and RPS is paid to the industry as
subsidy.
(b) Chart showing subsidy on Fertilizers
Production along with escalation in price of raw material and plant cost, the
subsidy amount swelled to huge proportions over the years. In an attempt to
reduce the burden of subsidy, the government has increased urea price by
10 % w.e.f February 2005. As a result, domestic urea prices have risen from
Rs3320/t (US$ 83/t) to Rs3660/t (US$ 91/t) for bagged deliveries to farmers.
The average subsidy pattern of urea is around US$ 84/t. prior to decontrol of
phosphatic and potassic fertilizers (in the year 1992) subsidy was available
to all domestic and imported fertilizers. The fertilizer subsidy increased from
US$ 418 million in 1999-00 to US$ 2446 million in 2004-2005. However, the
17
Page 18
subsidy bill after the decontrol of phosphatic and potassic fertilizer declined
and remained below 1990-91 level.
The union budget for 2000-01 raised urea prices by 15 percent; DAP by 7
percent and that of MOP by 15 percent. This move enabled the Government
of India (GOI) to prune the subsidy bill to some extent. However, there was
no increase in urea price in the union budget for 2001-02.
In the long term policy, the subsidy withdrawal in a phased manner has been
proposed. However, modality to phase out the subsidy has not been clearly
mentioned.
18
Page 19
2.7 Import of DAP
DAP is mainly imported from Jordan, Germany, Canada, Rumania, U.K, Japan,
U.S.A, Norway, Saudi Arabia, Philippines, Mexico, U.S.S.R and others.
YEARDAP
Production Imports Consumption
1997-98 28.65 20.77 45.18
1998-99 25.95 14.51 40.52
1999-00 19.51 15.69 34.80
2000-01 28.23 8.65 35.86
2001-02 26.47 15.14 34.51
2002-03 27.59 5.34 36.24
2003-04 36.91 14.60 53.76
2004-05 38.68 21.05 58.28
2005-06 38.63 32.68 69.38
2006-07 48.89 8.60 58.85
2007-08 50.94 9.33 61.81
2008-09 57.76 3.44 72.80**
.
( c) Chart showing import of DAP from 1997-2008
2.8 Public Sector Companies in INDIAN Fertilizer Market
19
Page 20
There are a number of public sector companies in Indian fertilizer market
producing complex fertilizers, ammonium sulphate, DAP, calcium ammonium
nitrate and urea. At present, there are nine public sector undertakings in the
Indian fertilizer market and one cooperative society. These function under
the supervision of the Department of Fertilizers of India. Of the 63 large units
producing fertilizers in India, 9 units are dedicated to the production of
ammonium sulphate and 38 units produce urea. There are 79 small and
medium scale units dedicated to the production of single super phosphate.
The Indian industries producing fertilizers have to total capacity of 56 lakh
MT of phosphatic nutrient and 121 lakh MT of nitrogen. Some of the public
sector undertakings in this sector are mentioned below:
1. Fertilizer Corporation of India Limited (FCIL)
2. Hindustan Fertilizer Corporation Limited (HFC)
3. Pyrites, Phosphates & Chemicals Limited (PPCL)
4. Rashtriya Chemicals and Fertilizers Limited (RCF)
5. National Fertilizers Limited (NFL)
6. Projects &Development India Limited (PDIL)
7. The Fertilizers and Chemicals Travancore Limited (FACT)
8. Madras Fertilizers Limited (MFL)
9. FCI Aravali Gypsum & Minerals India Limited, Jodhpur
Some of the other companies engaged in the production of fertilizers are
listed below:
1. Neyveli Lignite Corporation Ltd. (NLC)
2. Hindustan Copper Limited (HCL)
3. Steel Authority of India Limited (SAIL)
Private Companies in Indian Fertilizer Market
20
Page 21
A number of private companies in the Indian fertilizer market are engaged in
production of the agro-input. Most of the companies also engage in exporting
fertilizers in the global market, earning foreign capital from the business. The
country stands at the third position among the largest producers of the
product in the world. India is also ranks among the highest consumers of
fertilizers. The euphoric growth in the business has also facilitated the
agricultural industry of India, which is dependent for its optimization on the
fertilizer industry.
Private Companies Producing Fertilizers In INDIA
1. Paradeep Phosphates Ltd
2. Khaitan Chemicals and Fertilizers Limited
3. Mangalore Chemicals
4. Nagarjuna Fertilizers
5. Zuari Chambal
6. BEC Fertilizers
7. Gujarat State Fertilizers &Chemicals Limited
8. DSCL
Some of the other private companies engaged in the production of fertilizers
in India are listed below:
1. The Scientific Fertilizer Co Pvt Ltd
2. Coromandel Fertilizers
3. Deepak Fertilizers and Petrochemicals Corporation Limited
4. Aries AgroVet
5. Devidayal Agro Chemicals
The production of nitrogenous fertilizer in the private sector has been
increasing in the past few years. The private sector had only 13% share in
the production in 1960-61. The private sector has always retained a higher
share in the production of phosphatic fertilizer production
21
Page 22
Cooperative Companies Producing Fertilizer in India
1. Indian Farmers Fertilizers Co-operative Ltd.(IFFCO)
2. Krishak Bharati Cooperative Limited KRIBHCO
CHAPTER-3
COMPANY PROFILE
22
Page 23
3.1 PPL - Historical Developments
Paradeep Phosphates Limited (PPL) is a complex fertilizer unit engaged in the
production of Di-Ammonium Phosphate (DAP)/NPK fertilizers with its plant
located in the Port town of Paradeep at a distance of 120 Km’s from the
State capital, Bhubaneswar in Orissa on the East Cost of India.
With Registered and Corporate Offices at Bhubaneswar, the Company was
incorporated as a joint venture between the Government of India and the
Republic of Nauru with an investment of Rs. 630 crores on December 24,
1981. Subsequently it became a wholly owned Government of India
Enterprise since June 1993 after withdrawal of stake by the Government of
Nauru.
Later again the Government of India divested 74% of its own stake in favor
of a strategic partner – M/s. Zuari Maroc Phosphates Limited (ZMPL) effective
from 28th February 2002. The ZMPL is a (50:50) joint venture of Zuari
Industries Limited (ZIL), of the K.K Birla Group and the Maroc Phosphor S.A (A
wholly owned subsidiary of the fertilizer giant OCP of Morocco). At present
ZMPL holds 80.45% of the company’s shares and rest with the Government
of India.
3.2 Plant Capacities and Product Profile
Plant Advantages
23
Page 24
In-house production of intermediates with capacity for annual
production of 6, 60,000 MT of Sulphuric Acid and 2,25,000 MT
of Phosphoric Acid.
Captive Power Plant of 32 MW capacity for reliable operation.
Huge –storage facilities
Captive Berth at Paradeep Port - Capable of handling panama
vessels.
Sophisticated automatic ship unloaders.
Facilities to unload directly both solid & liquid cargo from ship
to storage tank/silo.
Plant Site well connected with own broad gauge railway
siding, road & close to an irrigational canal.
3.3 Product Profile
Navratna Brand of
Di-Ammonium Phosphate (DAP)
NPKS : 20:20:0:13
NPK : 12:32:16
NPK : 10:26:26
NPKS : 15:15:15:9
Sulphuric Acid
Ammonia
Gypsum in Bulk and Bags
3.4 Plant Assets
Port Facility
One sophisticated ship unloader of capacity of 1000 MT/Hr solid cargo.
Another automatic ship unloader has a capacity of 600 MT/Hr. The
24
Page 25
handling system also provides for discharging of 500 MT of liquid cargo
per hour.
3.1 Km long pipe rack and 3.4 Km long conveyor gallery for
transport of liquid and solid cargo directly from the ship to the
storage tanks and silos respectively in the plant.
Sulphuric Acid Plant (SAP)
Two similar SAP streams (1000 MTD each)
Installed Capacity 6, 60,000 MT/year.
Date of commercial production 01.06.1992.
Phosphoric Acid Plant (PAP)
One PAP unit (750 MTD)
Installed Capacity 2, 25,000 MT/year.
Three concentrators (2 nos. 150 MTD each & 1 no. 350 MTD)
Date of commercial production 01.06.1992
Di-Ammonium Phosphate Plant (DAP)
Four trains (600 MTD each)
All trains capable of producing DAP/NP & NPK fertilizers.
Total Installed Capacity 7, 20,000 MT/year.
Date of commercial production 01.08.1986
Storage Facilities
Ammonia - 50,000 MT
Phosphoric Acid - 60,000 MT
Sulphuric Acid - 36,000 MT
Rock Phosphate - 60,000 MT
25
Page 26
Sulphur - 45,000 MT
Finished Product - 60,000 MT
Imported Fertilizers - 25,000 MT
Bagging Plant
Eight Stitching lines for bagging
Three Platforms for simultaneous loading into wagons
Additional loading facilities for trucks
Bulk loading facilities for gypsum
Platform for dispatch of bagged imported fertilizers & gypsum
Captive Power Plant
Turbo Generators of 2 x 16 MW capacity
Use waste steam from SAP for generation of power.
Oil fired boiler of 110 MT/hr steam generation capacity.
3.5 Environment and Quality
Effluent Treatment Plant (ETP)
The effluent treatment plant at PPL Plant site is one of the largest of its kind
in India with a capacity to handle approximately 200 m3/hr of effluent.
The ETP is equipped with a 2050 m3 capacity equalization basin to contain
the effluent from all the plants.
3.6 Environment Management
PPL is a zero effluent plant since 2002. PPL has adopted an environmental
policy committed to continuous improvement in environmental standards
26
Page 27
and protection, prevention of pollution and conservation of resources in the
plant and its surrounding areas. It has taken major steps in achieving its
environmental objectives with the help of an Effluent Treatment Plant which
is one of the largest in the Indian Fertilizer Industry. Comprehensive
revamping of Sulphuric Acid and Phosphoric Acid Plants, separation of acid
and storm water drains, and construction of storage yards, reuse of sulphur
muck and a state-of-the-art Alkali Scrubber in the Sulphuric Acid Plant are
additional features .
3.7 Quality Control
The product quality is monitored and controlled through continuous checking
of nutrients Nitrogen, P2O5 and K2O round the clock during production. The
analysis is carried out with the use of highly sophisticated and accurate
‘Technician Auto Analyzer’ at the Laboratory.
3.8 Our Assets are our people
An employee friendly outlook is always the strength of the organization.
Right from the beginning, the management introduced a system of open
communication and dialogue with the employees. Good works done by
employees and useful suggestions from them are being rewarded through an
award scheme. The focus of the organization is always to enhance the multi-
tasking ability of every employee through various training programmes . The
Company has on its role 932 qualified and competent employees consisting
of 509 executives and 423 non-executives. Of these, 809 employees have
been posted at the Corporate Office & factory site and 123 in various
marketing offices spread throughout the country. Frequently high production
and dispatch records have been set, testifying the diligence of a motivated
employee force with accountability.
27
Page 28
3.9 Navratna Krishi Vikas
PPL develops farmers through different methods so that fertilizer
consumption is increased for fuelling agricultural growth of the Nation.
As a good business sense and a corporate social responsibility, PPL has taken
up pilot projects as part of Farm Advisory Services under the name
“NAVRATNA KRISHI VIKAS” in Nawarangpur & Nayagarh districts of Orissa
and Sarguja & Rajnandgaon districts of Chhattisgarh, to help enhancing of
agricultural output of farmers and increasing their farm income through
ventures like growing Tissue Culture Bananas, Vermi Compost, Mushroom
cultivation and helping Self Help Groups in the villages etc. Two more
districts viz. Dhenkanal and Khurda have been taken up starting June 2008
These projects are located within our market areas where fertilizer
consumption has been very low. The State Government machineries have
been associated with such activities and are actively involved in these
projects with a slogan of “Serving Farmers, Saving Farming”. Various
promotional and developmental activities include farmer training
programmes, demonstration of usage of hybrid seeds and balanced nutrition,
soil testing campaigns, crop diversification, dealers and retailers training
programmes. For soil testing PPL has both a mobile testing unit and
laboratory facilities in the plant.
For producing DAP and Complex fertilizer of NPK, PPL manufactures its
intermediate raw materials. The main units are:
Sulphuric Acid Plant
Phosphoric Acid Plant
Di-Ammonium Phosphate Plant
Supported with
28
Page 29
Bagging Plant with Railway Siding and Platform
Silo and Storage Tanks for storing different raw materials and products
Captive Power Plant
Off-sites & Utilities
Effluent Treatment Plant
3.10 Plant Township Advantages
PPL has built a modern township for its employees at Paradeep. Highlights of
the township are
Well built quarters in several colonies
Quarter is provided to all employees
A public school managed by DAV Trust
State-of-the-art Hospital managed by the Sun Hospital Group
Employee Recreation Club
Ladies Club
PPL Employees Consumer Co-operative Store Limited
Paradeep Phosphates Employees Co-operative Credit & Thrift
Society Limited
Navratna Park
Temple for religious activities
CHAPTER-4
CAPITAL BUDGETING
4.1 MEANING
Capital Budgeting is the process of making investment decisions in capital
expenditure. A capital expenditure may be defined as an expenditure the
benefit of which are expected to be received over a period of time exceeding
one year.
29
Page 30
The main characteristics of a capital expenditure are that the expenditure is
incurred at one point of time whereas benefits of the expenditure are
realized at different points of time in future. Capital expenditure involves
non-flexible long term commitment of funds. Thus capital expenditure
decisions are also called Long-Term Investment Decision. Capital budgeting
involves the planning and control of capital expenditure.
DEFINITION:
R.M.LYNCH has defined capital Budgeting as “Capital Budgeting
consists of employment of available capital for the purpose of
maximizing the long term profitability of the firm”.
Capital Budgeting is a many-sided activity. It includes searching for new and
more profitable investment proposals, investigating, engineering and
marketing considerations to predict the consequences of accepting the
investment and making economic analysis to determine the profit potential
of each investment proposal.
Its basic features can be summarized as follows;
1. It has the potentiality of making large anticipated profits.
2. It involves a high degree of risk.
3. It involves a relatively long-time period between the initial
outlay and the anticipated return.
Capital Budgeting consists of planning and the development of available
capital for the purpose of maximizing the long-term profitability of the firm.
4.2 NEED AND IMPORTANCE OF CAPITAL BUDGETING
Capital Budgeting means planning for capital assets. Capital Budgeting
decisions are vital to any organization as they include the decision to;
30
Page 31
1. Whether or not funds should be invested in long term projects
such as setting of an industry, purchase of plant and
machinery etc.,
2. Analyze the proposal for expansion or creating additional
capacity.
3. To decide the replacement of permanent assets such as
building and equipments.
4. To make financial analysis of various proposal regarding
capital investments so as to choose the best out of many
alternative proposals.
The importance of capital Budgeting can be well understood from the fact
that an unsound investment decision may prove to be fatal to the very
existence of the concern. The need, significance or importance of capital
budgeting arises mainly due to the following.
1. Large Investments
Capital budgeting decisions, generally involves large investment of funds.
But the funds available with the firm are always limited and the demand for
funds exceeds the resources. Hence it is very important for a firm to plan
and control its capital expenditure.
2. Long-term commitment of Funds
Capital expenditure involves not only large amounts of funds but also funds
for long-term or more or less on permanent basis. The long-term
commitment of funds increases the financial risk involved in the investment
decision.
3. Irreversible Nature
31
Page 32
The capital expenditure decisions are of irreversible nature. Once the
decisions for acquiring a permanent asset is taken, it became very difficult to
dispose of these assets without incurring heavy losses.
4. Long-term Effect of profitability
The investment decisions taken today not only affects present profit but also
the future profitability of the business. A profitable project selection is fatal
to the business.
5. Difficulties of investment decisions
The long term investment decisions are more difficult to take because,
1. Decision extends to a series of years beyond the current
accounting period.
2. Uncertainties of future and
3. Higher degree of risk.
6. National Importance
An investment decision through taken by individual concerns is of national
importance because it determines employment, economic activities and
economic growth.
7. Effect on cost structure
By taking a capital expenditure decision, a firm commits itself to a sizeable
amount of fixed cost in terms of interest, supervisors salary, insurance,
building rent etc. If the investment turns out to be unsuccessful in future or
produces less than anticipated profits, the firm will have to bear the burden
of fixed cost.
8. Impact on firm’s competitive strength
32
Page 33
The capital budgeting decisions affect the capacity and strength of a firm to
face competition. It is so because the capital investment decisions affect the
future profits and costs of the firm. This will ultimately affect the firms
competitive strength.
9. Cost control
In capital budgeting there is a regular comparison of budgeted and actual
expenditures. Therefore cost control is facilitated through capital budgeting.
10. Wealth Maximization
The basic objective of financial management is to maximize the wealth of the
shareholders. Capital budgeting helps to achieve this basic objective. Capital
budgeting avoids over investments and under investments in fixed assets. In
this way capital budgeting protects the interest of the shareholders and of
the enterprise.
4.3 STEPS IN CAPITAL BUDGETING
Capital budgeting is a complex process. It involves decision relating to the
investment of current funds for the benefit to be achieved in future which is
always uncertain. Capital budgeting is a six step process. The following steps
are involved in capital budgeting;
1. Project generation
The capital budgeting process begins with generation or identification of
investment proposals. This involves a continuous search for investment
opportunities which are compatible with firm’s objectives.
2. Project screening
33
Page 34
Each proposal is then subject to a preliminary screening process in order to
assess whether it is technically feasible, resources required are available,
and expected returns are adequate to compensate for the risks involved.
3. Project evaluation
After screening of project ideas or investment proposals the next step is to
evaluate the profitability of each proposal. This involves two steps;
a. Estimation of cost and benefit in terms of cash flows
b. Selecting an appropriate criterion to judge the desirability of the
project.
4. Project selection
After evaluation the next step is the selection and the approval of the best
proposal. In actual practice all capital budgeting decision are made at
multiple levels and are finally approved by top management.
5. Project execution and implementation
After the selection of project funds are allocated for them and a capital
budget is prepared. It is the duties of the top management or capital
budgeting committee to ensure that funds are spend in accordance with
allocation made in the capital budget.
6. Performance review
After the implementation of the project, its progress must be reviewed at
periodical intervals. The follow-up or review is made by comparing actual
performance with the budget estimates.
4.4 OPERATING BUDGET AND CAPITAL BUDGET
34
Page 35
Most of the large firms prepare two different budgets each year.
1. OPERATING BUDGET
Operating budget shows planned operations for the forthcoming period and
includes sales, production, production cost, and selling and distribution
overhead budgets. Capital budgets deals exclusively with major investment
proposals.
2. CAPITAL EXPENDITURE BUDGET
Capital Expenditure is a type of functional budget. It is the firm’s formal plan
for the expenditure of money for purchase of fixed assets. The budget is
prepared after taking in to account the available production capacities,
probable reallocation of existing resources and possible improvements in
production techniques. If required, separate budgets can be prepared for
each item of capital assets such as a building budget, a plant and machinery
budget etc.
4.5 OBJECTIVES OF CAPITAL EXPENDITURE BUDGET
The objectives of Capital Expenditure Budget are as follows.
1. It determines the capital projects on which work can be started
during the budget period after taking in to account their urgency
and the expected rate of return on each project.
2. It estimates the expenditure that would have to be incurred on
capital projects approved by the management together with the
35
Page 36
source or sources from which the required funds would be
obtained.
3. It restricts the capital expenditure on projects within authorized
limits.
CONTROL OVER EXPENDITURE THROUGH CAPITAL EXPENDITURE BUDGET
The capital expenditure budget primarily ensures that only such projects are
taken in hand which are either expected to increase or maintain the rate of
return on capital employed. Each proposed project is appraised and only
essential project or projects likely to increase the profitability of the
organization are included in the budget. In order to control expenditure on
each project, the following procedure is adopted.
1. A project sheet is maintained for each project.
2. In order to ensure that the expenditure on different project is
properly analyzed.
3. The expenditure incurred on the project is regularly entered on the
project sheets from various sources such as invoices of assets
purchased, bill for delivery charges etc.,
4. The management is periodically informed about expenditure
incurred in respect of each project under appropriate heads.
5. In case project cost is expected to increase; a supplementary
sanction for the same is obtained.
6. In financial books the total expenditure incurred on all projects is
separately recorded.
4.6 TACTICAL AND STRATEGIC INVESTMENT DECISION
Investment decision can be classified as,
36
Page 37
1. Tactical Decision
A Tactical Decision generally involves a relatively small amount of funds and
does not constitute a major departure from the past practices of the
company.
2. Strategic Decision
A Strategic Investment Decision involves a large sum of money and may also
result in a major departure from the past practices of the company.
Acceptance of a Strategic Investment Decision involves a significant change
in the company’s expected profits associated with a high degree of risk.
4.7 RATIONALE OF CAPITAL EXPENDITURE
Efficiency is the rationale underlying all capital decisions. A firm has to
continuously invest in new plant or machinery for expansion of its operations
or replace worn-out machinery for maintaining and improving its efficiency.
The overall objective is to maximize the firm’s profits and thus optimizing the
return on investment. This objective can be achieved either by increased
revenues or by cost reduction. Thus capital expenditure can be of two types;
1. Expenditure Increasing Revenue
2. Expenditure Reducing Cost
4.8 KINDS OF CAPITAL INVESTMENT PROPOSALS
A firm may have several investment proposals for its consideration. It may
adopt one of them, some of them or all of them depending upon whether
they are independent, contingent or dependent or mutually exclusive.
1. INDEPENDENT PROPOSALS
37
Page 38
These are proposals which do not compete with one another in a way that
acceptance of one precludes the possibility of acceptance of another. In case
of such proposals the firm may straight away “accept or reject” a proposals
on the basis of minimum return on investment required. All these proposals
which give a higher return than a certain desired rate of return are accepted
and the rest are rejected.
2. CONTINGENT OR DEPENDENT PROPOSALS
These are proposals whose acceptance depends on the acceptance of one or
more other proposals. When a contingent investment proposal is made, it
should also contain the proposal on which it is dependent in order to have a
better perspective of the situation.
3. MUTUALLY EXCLUSIVE PROPOSALS
These proposals which compete with each other in a way that the
acceptance of one precludes the acceptance of other or others. Two or more
mutually exclusive proposals cannot both or all be accepted. Some
techniques have to be used for selecting the better or the best one. Once
this is done, other alternative automatically gets eliminated.
4. REPLACEMENT PROPOSALS
These aim at improving operating efficiency and reducing costs. These are
called cost reduction decisions.
5. EXPANSION PROPOSALS
This refers to adding capacity to existing product line.
6. DIVERSIFICATION PROPOSALS
38
Page 39
Diversification means operating in several markets rather than a single
market. It may also involve adding new products to the existing products.
Diversification decisions require evaluation of proposals to diversify in to new
product lines, new markets etc., for reducing the risk of failure.
7. CAPITAL RATIONING PROPOSALS
Capital rationing means distribution of capital in favor of some acceptable
proposals. A firm cannot afford to undertake all profitable proposals because
it has limited funds to invest. In such a case, these various investment
proposals compete for limited funds and the firm has to ration them. Thus
the situation where the firm is not able to finance all the profitable
investment opportunities due to limited resources is known as capital
rationing.
4.9 FACTORS AFFECTING CAPITAL INVESTMENT DECISIONS
The following are the four important factors which are generally taken in to
account while making a capital investment decision.
1. The Amount of Investment
In case a firm has unlimited funds for investment it can accept all capital
investment proposals which give a rate of return higher than the minimum
acceptable or cut-off rate.
2. Minimum Rate of Return on Investment
The management expects a minimum rate of return on the capital
investment. The minimum rate of return is usually decided on the basis of
the cost of capital.
39
Page 40
3. Return Expected from the Investment
Capital investment decisions are made in anticipation of increased return in
the future. It is therefore necessary to estimate the future return or benefits
accruing from the investment proposals while evaluating the capital
investment proposals.
4. Ranking of the Investment Proposals
When a number of projects appear to be acceptable on the basis of their
profitability the project will be ranked in the order of their profitability in
order to determine the most profitable project.
4.10 METHODS OF CAPITAL BUDGETING OR EVALUATION
OF INVESTMENT PROPOSALS
A business firm has a number of proposals regarding various projects in
which it can invest funds. But the funds available with the firm are always
limited and it is not possible to invest funds in all the proposals at a time.
The most widely accepted techniques used in estimating the cost returns of
investment projects can be grouped under two categories;
1. TRADITIONAL METHODS (NON DISCOUNTED CASH FLOW)
a. Payback Period Method
b. Average rate of Return Method
2. MODERN METHODS (DISCOUNTED CASH FLOW)
a. Net Present Value Method
b. Internal rate of Return Method
c. Profitability Index Method
40
Page 41
TRADITIONAL METHODS (NON DISCOUNTED CASH FLOW)
A. PAY BACK PERIOD METHOD
The payback period method is the simplest method of evaluating investment
proposals. Payback period represents the number of years required to
recover the original investment. The payback period is also called Pay Out or
Pay off Period. This period is calculated by dividing the cost of the project by
the annual earnings after tax but before depreciation. Under this method the
project is ranked on the basis of the length of the payback period. A project
with the shortest payback period will be given the highest rank.
METHODS OF COMPUTATION OF PAYBACK PERIOD
There are two ways of calculating the payback period.
a. When annual cash inflow is constant
The formula is find out the payback period if the project generates constant
annual cash inflow is;
Original cost of the project
Payback period = Annual cash inflow
Annual cash inflow is the annual earning (profit depreciation and after taxes)
before
b. When annual cash inflow is not constant
If the annual cash inflows are unequal the payback period can be found out
by adding up the cash inflows until the total is equal to the initial cash outlay
of the project.
ADVANTAGES OF PAYBACK PERIOD
1. Simple to understand and easy to calculate.
2. It reduces the chances of loss through obsolescence.
3. A firm which has shortage of funds find this method very
useful.
41
Page 42
4. This method costs less as it requires only very little effort
for its Computation.
DISADVANTAGES
1. This method does not take in to consideration the cash
inflows beyond the payback period.
2. It does not take in to consideration the time value of
money. It considers the same amount received in the
second year and third year as equal.
3. It gives over emphasis for liquidity.
ACCEPTANCE RULE
The following are the Payback [P.B.Rules]
Accept P.B<cut-off rate
Reject P.B>cut-off rate
May Accept P.B<cut-off rate
Cut-off rate
Cut-off rate is the rate below which a project would not be accepted. If ten
percentage is the desired rate of return, the cut-off rate is 10%.The cut-off
point may also be in terms of period. If the management desires that the
investment in the project should be recouped in three years, the period of
three years would be taken as the cut-off period. A project incapable of
generating necessary cash to pay for the initial investment in the project
with-in three years will not be accepted.
II. AVERAGE RATE OF RETURN (ARR) METHOD
This method otherwise called the Rate of Return Method, takes in to account
the earnings expected from the investment over the entire life time of the
asset. The various projects are ranked in order of the rate of returns. The
42
Page 43
project with the higher rate of return is accepted. Average Rate of Return is
found out by dividing the average income after depreciation and taxes, i.e.
the accounting profit, by the Average Investment.
Average Annual Earnings
ARR = x 100
Average Investment
Where;
Average Annual Earnings is the total of anticipated annual earnings after
depreciation and tax (accounting profit) divided by the number of years.
Average Investment means
i. If there is no salvage (Scrap value)
Total Investment
2
ii. If there is scrap value
Total Investment-Scrap Value
+ Scrap Value
2
iii. If there is additional working capital
Total Investment-Scrap Value
+ Scrap +Additional Working Capital
2
43
Page 44
ADVANTAGES OF AVERAGE RATE OF RETURN (ARR) METHOD
1. It is easy to calculate and simple to understand.
2. Emphasis is placed on the profitability of the project and not on
liquidity.
3. The earnings over the entire life of the project is considered for
4. ascertaining the Average Rate of Return.
5. This method makes use of the accounting profit.
DISADVANTAGES
1. Like the payback period method this method also ignores the time
value of money. The averaging technique gives equal weight to
profits occurring at different periods.
2. This averaging technique ignores the fluctuations in profits of
various years.
3. It makes use of the accounting profits, not cash flows, in evaluating
the project.
1. DISCOUNTED CASH FLOW METHODS
The payback period method and the Average rate of Return Method do not
take in to consideration the time value of money. They give equal weight to
the present and the future flow of incomes. The discounted cash flow
methods are based on the concept that a rupee earned today is more worth
than a rupee earned tomorrow. These methods take in to consideration the
profitability and also the time value of money.
I. NET PRESENT VALUE (NPV) METHOD
44
Page 45
The Net Present Value Method (NPV) gives consideration to the time value of
money. It views that the cash flows of different years differ in value and they
become comparable only when the present equivalent values of these cash
flows of different periods are ascertained. For this the net cash inflows of
various periods are discounted using the required rate of return, which is a
predetermined rate .If the present value of expected cash inflows exceeds
the initial cost of the project, the project is accepted.
NPV = Present value of cash inflows-Present value of initial
investment
STEPS IN NET PRESENT VALUE (NPV) METHOD
1. Determine an appropriate rate of interest to discount cash flows.
2. Compute the present value of total investment outlay (i.e., cash
outflow) at the determined discounting rate.
3. Compute the present value of total cash inflows (profit before
depreciation and after tax) at the above determined discount rate.
4. Subtract the present value of cash outflow (cost of investment) from
the present value of cash inflows to arrive at the net present value.
5. If the net present value is negative i.e., the present value cash
outflow is more than the present value of cash inflow the project
proposals will be rejected .If net present value is zero or positive the
proposal can be accepted.
6. If the projects are ranked the project with the maximum positive net
present value should be chosen.
ADVANTAGES OF NET PRESENT VALUE METHOD
1. It considers the time value of money.
2. It considers the earnings over the entire life of the project.
45
Page 46
3. Helpful in comparing two projects requiring same amount of cash
outflows.
DISADVANTAGES OF NET PRESENT VALUE METHOD
1. Not helpful in comparing two projects with different cash outflows.
2. This method may be misleading is in comparing the projects of
unequal lives.
II. INTERNAL RATE OF RETURN (IRR) METHOD
The Internal Rate of Return for an investment proposal is that discount rate
which equates the present value of cash inflows with the present value of
cash outflows of the investment. The Internal Rate of Return is compared
with a required rate of return. If the Internal Rate of Return of the investment
proposal is more than the required rate of return the project is rejected. If
more than one project is proposed, the one which gives the highest internal
rate must be accepted.
It can be calculated by the following formula
P1-Q
IRR = L+ x D
P1-P2
Where,
L = Lower rate of discount
P1 = Present value of cash inflows at lower rate of discount
P2 = Present value at higher discount rate
Q = Initial Investment
D = Difference in rate
ADVANTAGES OF INTERNAL RATE OF RETURN
1. It considers the time value of money.
46
Page 47
2. The earnings over the entire life of project is considered.
3. Effective for comparing projects of different life periods and
different timings in timings of cash inflows.
DISADVANTAGES
1. Difficult to calculate.
2. This method presumes that the earnings are reinvested at the rate
earned by the investment which is not always true.
Accept or Reject Rule
Internal Rate of Return is the maximum rate of interest which an
organization can afford to pay on the capital invested in a project. A project
would qualify to be accepted if Internal Rate of Return exceeds the cut-off
rate. While evaluating two or more projects, a project giving a higher Internal
Rate of Return would be preferred. This is because higher the rate of return,
the more profitable is the investment.
III. PROFITABILITY INDEX METHOD
Present Value of Cash Inflows
Profitability Index =
Present Value of Cash Outflows
This is also called Benefit-Cost ratio. This is slight modification of the Net
Present Value Method. The present value of cash inflows and cash outflows
are calculated as under the NPV method. The Profitability Index is the ratio of
the present value of future cash inflow to the present value of the cash
outflow, i.e., initial cost of the project.
47
Page 48
If the Profitability index is equal to or more than one proposal the proposal
will be accepted. If there are more than one investment proposals, the one
with the highest profitability index will be preferred.
This method is also known as Benefit-Cost ratio because the numerator
measures benefits and the denominator measures costs. ”It is the ratio of
the present value of cash inflow at the required rate of return to the initial
cash outflow of the investment.
4.11 Cost Effective Analysis
In the cost effectiveness analysis the project selection or technological
choice, only the costs of two or more alternative choices are considered
treating the benefits as identical. This approach is used when the acquisition
of how to minimize the costs for undertaking an activity at a given discount
rates in case the benefits and operating costs are given, one can minimize
the capital cost to obtain given discount.
4.12 Project Planning:
The planning of a project is a technically pre- determined set of inter related
activities involving the effective use of given material, human, technological
and financial resources over a given period of time. Which in association with
other development projects result in the achievement of certain
predetermined objectives such as the production of specified goods &
services?
Project planning is spread over a period of time and is not a one shot
activity. The important stages in the life of a project are:
48
Page 49
1. It’s Identification
2. It’s initial formulation
3. It’s evaluation (Whether to select or to project)
4. It’s final formulation
5. It’s implementation
6. It’s completion and operation
The time taken for the entire process is the gestation period of the project.
The process of identification of a project begins when we are seriously trying
to overcome certain problems. They may be non- utilization to overcome
available funds. Plant capacity, expansion etc
Contents of the project report:
1. Market and marketing
2. Site of the project
3. Project engineering dealing with technical aspects of the
project.
4. Location and layout of the project building
5. Building
6. Production capacity.
7. Work Schedule
Details of the cost of the Project:-
1. Cost of land
2. Cost of Building
3. Cost of plant and machinery
4. Engineering know how fee
5. Expenses on training Erection supervision
6. Miscellaneous fixed assets
49
Page 50
7. Preliminary expenses
8. Pre-operative expenses
9. Provision for contingencies
4.13 RISK AND UNCERTAINITY IN CAPITAL BUDGETING
All the techniques of capital budgeting requires the estimation of future cash
inflow and cash outflows. The cash flows are estimated abased on the
following factors.
Expected economic life of the project.
Salvage value of the asset at the end of the economic life.
Capacity of the product.
Selling price of the product.
Production cost.
Depreciation.
Rate of Taxation
Future demand of the product, etc.
But due to uncertainties about the future the estimates of demand,
production, sales costs, selling price, etc cannot be exact, for example a
product may become obsolete much earlier than anticipated due to un
expected technological developments all these elements of uncertainties
have to be take into account in the form of forcible risk while making an
investment decision. But some allowances for the element of risk have to be
proved.
4.14 FACTORS INFLUENCING CAPITAL EXPENDITURE
50
Page 51
DESCISIONS:
There are many factors financial as well as non financial which influence the
capital expenditure decisions and the profitability of the proposal yet, there
are many other factors which have to be taken into consideration while
taking a capital expenditure decisions. They are
1. URGENCY
Sometime an investment is to be made due to urgency for the survival of the
firm or to avoid heavy losses. In such circumstances, proper evaluation
cannot be made though profitability tests. Examples of each urgency are
breakdown of some plant and machinery fire accidents etc.
2. DEGREE OF UNCERTAINTY
Profitability is directly related to risk, higher the profits, greater is the risk or
uncertainty.
INTANGIBLE FACTORS
Sometimes, a capital expenditure has to be made due to certain emotional
and intangible factors such as safety and welfare of the workers, prestigious
projects, social welfare, goodwill of the firm etc.
1. AVAILABILITY OF FUNDS
As the capital expenditure generally requires the previsions of laws solely
influence by this factor and although the project may not be profitable. Yet
the investment has to be made.
51
Page 52
2. FUTURE EARNINGS
A project may not be profitable as competed to another today, but it may be
profited to increase future earnings.
Sometimes project with some lower profitability may be selected due to
constant flow of income as compared to another project with an irregular and
uncertain inflow of income.
4.15 CAPITAL EXPENDITURE CONTROL
Capital expenditure involves no-flexible long-term commitments of funds.
The success of an enterprise in the long run depends up on the effectiveness
with which the management makes capital expenditure decision. Capital
expenditure decisions are very important as their impact is more or less
permanent on the well being and economic health of the enterprise. Because
of this large scale mechanization and automation and importance of capital
expenditure for increase in the profitability of a concern. It has become
essential to maintain an effective system of capital expenditure control.
4.16 OBJECTIVES CONTROL OF CAPITAL EXPENDITURE
To make an estimate of capital expenditure and to see that the
total cash outlay is within the financial resources of the
enterprise
To ensure timely cash inflows for the projects so that no
availability of cash may not be problem in the implementation of
the problem.
To ensure that all capital expenditure is properly sanctioned.
To properly coordinate the projects of various departments
To fix priorities among various projects and ensure their follow-
up.
52
Page 53
To compare periodically actual expenditure with the budgeted
ones so as to avoid any excess expenditure.
To measure the performance of the project.
To ensure that sufficient amount of capital expenditure is
incurred to keep pace with rapid technological development.
To prevent over expansion.
4.17 STEPS INVOLVED IN CONTROL OF CAPITAL
EXPENDITURE
Preparation of capital expenditure budget.
Proper authorization of capital expenditure.
Recording and control of expenditure.
Evaluation of performance.
LEASE FINANCING
Lease finance is an agreement for the use of an asset for a specified rental.
The owner of the asset is called the lesser and the user the lesser
1) Operating leases
2) Financial leases
Operating leases are short-term no-cancel able leases where the risk of
obsolescence in borne by the lesser
Financial leases are long-term non-cancelable leases where any risk in the
use of asset is borne by the lessee and he enjoys the return too.
Preliminary budget estimates for the year following the budget year.
53
Page 54
GENERAL GUIDELINES:-
The capital funds budget is to be prepared under six major heads.
1) Continuing schemes
2) New schemes
3) Modernization and rationalization
4) Township
5) Science and technology
6) EDP schemes
CONTINUING SCHEMES
These schemes include all such schemes which are under implementation of
which funds prevision has been made in the current year /prevision is
required in the budget year.
NEW SCHEMES
This scheme includes all such schemes, which are proposed to be initiated in
the budget year and for which under provisions is required in the budget
year. Normally, such schemes are included in the five-year plan of the
company approved by the planning commission.
MODERNIZATION AND RATIONALIZATION (M&R)
This includes item of plant and machinery etc for which funds required in the
budget year and the following year. All item included in M&R should result in
cost reduction/quality improvement/rebottle
necking/replacement/productivity, improvement and welfare. The M&R items
are to be submitted in the following main characteristics accompanied with
54
Page 55
full justification on the agenda of facilities increased output and production,
quality requirements bottlenecks.
1. Replacement / modernization.
2. Balancing facilities (essentially to increase production).
3. Operational requirements including material handling
4. Quality/testing facilities.
5. Welfare
6. Minor works.
These requirements should be protested term wise. A separate proposal is
required for M&R items costing more than Rs. 10, 00,000.
TOWNSHIP
Township budget is divided into two parts.
Continuing township schemes
New townships schemes.
Funds required under each schemes should be backed up with full data on
number on quarter/scope of work to be completed against the funds
requirements phasing of budgeted funds for current year, budget year and
following year etc, should be given similar information on number of
quarter/scope of work already completed, expenditure incurred till last year,
satisfaction level it is to be added in the above back up information for each
scheme.
SCIENCE AND TECHNOLOGY
This budget can be divided into two categories
Continuing schemes.
55
Page 56
New schemes to be taken up in the budget year.
The schemes should fall in any of the above cartages giving details on
physical and financial progress etc.
EDP SCHEMES
All funds requirements for computer are information system should be
grouped under EDP schemes and projects accordingly.
BUYING OR PROCURING
Buying or procurement involves purchasing an asset permanently in the
form of cash or credit.
LEASING VS BUYING
Leasing equipment has the tax advantage of depreciation, which can
mutually benefit the lesser and lessee, other advantage of leasing, include
convenience and flexibility as well as specialized services to the lessee.
Lease privies handy to those linens, which cannot obtain loan capital form
normal sources.
The pros and cons of leasing and buying are to be examined thoroughly
before deciding the method of procurement i.e. leasing or buying.
56
Page 57
CHAPTER-5
FINANCING OF PROJECT
Project financing is considered right from the time of the conception of the
project. The proposal of the project progress working capital, so, in general a
project is considered as a ‘mini firm’ is a part and parcel of the organization.
5.1 Sources of Finance:
Loan Financing
Security Financing
Internal Financing
Loan Financing:
57
Page 58
(a). Short- Term Loans & Credits
Short – Term Loans & Credits are raised by a firm for meeting its working
capital requirements. These are generally for a short period not exceeding
the accounting period i.e., one – year.
Types of Short Term Loans & Credits:
1. Trade Credit.
2. Installment Credit.
3. Advances.
4. Commercial papers
5. Commercial banks
6. Cash Credits
7. Over Drafts
8. Public Deposits.
(b). Term Loans:
Term loans are given by the financial institutions and banks, which form the
primary source of long term debt for both private as well as the Government
organizations. Term loans are generally employed to finance the acquisition
of fixed assets that are generally repayable in less than 10 years. In addition
to short- term loans, company will raise medium term and long term loans.
5.2 Security Financing:
Corporate Securities can be classified into two categories.
(a)Ownership Securities or capital stock.
(b)Creditor ship Securities or debt Capital.
58
Page 59
(a) Ownership Securities or capital Stock:
Types of Ownership Securities or Capital Stock:
i) Equity Capital:
Equity Capital is also known as owner’s capital in a firm. The holders of these
shares are the real owners of the company. They have a control over the
working of the company. Different ways to raise the equity capital.
o Initial public offering.
o Seasoned offering
o Rights issue.
o Private placement
o Preferential allotment.
ii) Preference Capital:
These shares have certain preferences as compared to other type of shares.
1. Payment of Divided
2. Repayment of the capital at the time of liquidation of the
company.
b) Types of Creditor ship Securities:
Debentures:
Debentures are an alternative to the term loans and are instruments for
raising the debt finance. Debenture holders are the creditors of a company
and the company and the company have the obligations to pay the interest
59
Page 60
and principal at specified times. Debentures provide more flexibility, with
respect to maturity, interest rate, security and repayment Debentures may
be fixed rate of interest or floating rate or may be zero rates. Debentures &
Ownership Securities help the management of the company to reduce the
cost of capital.
5.3 Internal Financing:
A new company can raise finance only through external sources such as
shares, debentures, loans and public deposits. For existing company they
need to raise funds through internal source. Such as retained earnings
depreciation as a source of funds. Some other innovative source of finance
Venture Capital
Seed Capital
Bridge Finance
Lease Financing
Euro- Issues
CHAPTER-6
INTRODUCTION TO FINANCE AND ACCOUNTS DEPARTMENT
Finance is the lifeblood of the business .According to Howard and Upton
“Finance is that administrative area or set of administrative function in
organizations which relate with the arrangements of cash and credit so that
the organization may have the means to carry out of its objective as
possible.”
6.1 Functions Of Finance and Accounting Department
60
Page 61
Finance & Accounts Department of BHUBANESHWAR Unit is controlled by
Head Of the Department i.e. C.F.O. His main function is to co-ordinate all
activities related to Finance & Accounts and report to Head Office’s Finance
& Accounts Department / Finance Director as well Unit Head. Finance &
Accounts Department function various type of activities as per the Guidelines
issued by Head Office, Purchase Procedure, Service Rules, Powers of officer
etc. At present to carry out all the related activities, following four sectional
heads are reporting to him for work connected to their Sections. All the four
sectional heads independently report to Departmental Head. However, in
case, Departmental Head happens on tour or on leave, the next senior
sectional head takes the charge of the department and remaining here
sectional head will report to him for all the work connected to their Sections.
6.2 FINANCE DEPARTMENT COMPRISES OF
1. Pay roll section
2. Raw materials
3. Fixed assets & insurance
4. Works bill section
5. Purchase bill section
6. Books & budgets
7. Financial concurrence
PAY ROLL SECTION
Pay roll section takes care of all the financial issues of employees in co-
ordination with Administrative & Personnel Department. Its functions
61
Page 62
includes management of salaries, TA/DA, loans & advances, misc payment
related to employees, Perk/There allowance payments etc. Here records of
each employee are maintained regarding basic pay, leave encashment,
medical, salary, increments, promotion based perks, etc.
RAW MATERIALS
Different types of Raw Materials that are required at PPL, PARADEEP Unit are
as follows :
1. Sulphuric Acid
2. Phosphoric Acid
3. Ammonia
4. Potash
5. MAP
6. Urea
7. Filler
Raw Material section in F & A department does the accounting of above
mentioned raw-material which includes receipt of raw- material are
purchased, monthly consumption as per the production department and
payment to the suppliers.
MISCELLANEOUS ACCOUNTS
The miscellaneous jobs can be broadly divided into following categories:
1. Passing of bills of miscellaneous nature;
2. Accounting of cash imprested and advances for expenses;
3. Miscellaneous recoveries from outside agencies.
62
Page 63
Miscellaneous bills includes rates contracts for service contract for air
conditioner, water coolers, weighing machines, franking machines, knitting
of chairs, etc. Others miscellaneous bills includes telephone rentals, STD
calls, local calls, teleprinters , fax, service bills, advertisement bills,
electricity bills, printing and block making bills, bills of travel agents, bills of
canteen purchases, etc. Annual Contracts and Hiring of taxi, motors, etc. is
also included in this.
WORKS BILLS
Work bills section is entrusted with the task of checking and authentication
of APF received from various departments such as Civil, Plant, and Township
etc. They have to keep record and maintain account. They have to verify
with respect to measurements, Tax provisions like TDS and other deductions
like EMD, Security and penalty etc.
PURCHASE BILLS
In purchase bill, treatment is given to the bills on purchase of machinery and
tools and spares etc. for accounting requirements and book keeping as well
as record maintenance and tax deductions and authentication of AFP on
purchase of Goods and Services.
FINANCIAL CONCURRENCE
Financial concurrence deals with crosschecking and green signaling the
requisition for purchases made by various indent departments of the unit.
They check for the availability of budget and ascertain its necessity and
critically for regular and smooth operations of the plants and activities of
various departments.
63
Page 64
BOOKS & BUDGETS
Books and budget deal with revenue budget compilation, monitoring and
control, reconciliation of inter unit accounts, maintenance of books of
accounts and submission of monthly / quarterly / annual reports, COP
processing and attending internal / statutory / tax auditors.
CHAPTER-7
DATA ANALYSIS AND INTERPRETATION
7.1 Production (2006-2007 to 2010-2011)
(In MT)
Particulars 06-07 07-08 08-09 09-10 10-11
Production
DAP 822395 879765 470155 764464 657550
NPK 486415 401580 552085 447995 541352
% Capacity
utilization 182 178 142 168 167
64
Page 65
7.1 Sales: Manufactured Fertilizers(2006-2007 to 2010-
2011)
(In
MT)
Particulars 06-07 07-08 08-09 09-10 10-11
DAP 838586 892212 469694 776715 649407
NPK 479529 423187 545728 458248 519185
7.2 Sales: Traded Fertilizers (2006-2007 to 2010-2011)
(In MT)
Particulars 06-07 07-08 08-09 09-10 10-11
DAP --- --- 46766 112954 159739
MOP 142152 80530 129733 110883 117753
7.3 Balance Sheet (2006-2007 to 2010-2011)
(In lacs)
Particulars 06-07 07-08 08-09 09-10 10-11
Sources of Funds:
Auth share capital 100000 100000 100000 100000 100000
Paid up capital 57545 57545 57545 57545 57545
Reserve and surplus --- --- --- 10791 28500
Secured loan 13619 2785 85072 104307 113987
Unsecured loan 76475 75788 42725 8329 ---
Total sources of funds
147639 136118 185342 180972 200032
Application of Funds:
65
Page 66
Gross Block(including
CWIP) 73251 75734 77436 79349 83178
Net Block(including
CWIP) 26887 25706 24149 23652 25419
Investments --- --- 82130 605 5
Deferred tax Assets --- --- --- 3369 2037
Current Assets
Inventories 28595 21496 55159 37363 50023
Sundry Debtors 68236 56541 86632 60052 51764
Others 6130 47507 103523 117391 107567
Total 102961 125544 245314 214806 209354
Current Liabilities and
Provisions 48770 73207 170615 61460 36783
Net Current Assets 54191 52337 74699 153346 172571
Deferred Revenue Exp 131 --- --- --- ---
Accumulated Loss 66430 58075 4364 --- ---
TotalApplication(fund
s)
147639 136118 185342 180972 200032
7.4 Profit and Loss Statement(2006-2011)
(In Lacs) Working results 06-07 07-08 08-09 09-10 10-11
Sales 119793 120663 94368 119831 128297
Subsidy 86276 124527 417077 178583 222170
Other Income 652 3487 49530 18153 12597
Total 206721 248677 560975 316927 363064
Cost Of Sales(including prior
period adj but excluding Dep
and Interest)187719 230047 484485 288612 327032
Gross Margin (19002) (18630) (76490) (28315) (36032
66
Page 67
)
Depreciation 3402 3817 3347 3048 2470
Profit/(loss) before Int and
Taxes
15600 14813 73143 25267 33562
Interest 4613 6387 5262 7294 9644
Profit/(loss) before taxes 10987 8426 67881 17973 23918
Taxes including FBT 59 70 14170 6187 8278
Debit/(Credit) for deferred
tax
--- --- --- (3369) 1332
TaxationExpenses Credited --- --- --- --- (3400)
NET PROFIT/(LOSS) 10928 8356 53711 15155 17708
67
Page 68
CHAPTER-8EVALUATION OF PROJECT USING CAPITAL BUDGETING
TECHNIQUES
8.1 PROJECT EVALUATION
Name of the Project: Baggaging plant with handling system .
Project Estimate: Ventured into the market and got a quote for 300 Cr.
Project Cost: 300 Cr
Assumption: The Company has currently a dispatch mechanism which is
mechanized for dispatching or bagging 3,300 MT/day. The company plans to
increase its production level to 16, 00,000 MT/annum. So, the dispatch
system should be increased to an additional 1,550 Mt/day so that the total
dispatching to be done per day goes up to 4,850Mt/day. So, as to ensure the
smooth functioning of the dispatching system and this can be done by
setting up a new baggaging plant…
Present Capacity-3,330MT/day
New Capacity - 4,850MT/day
Difference or excess production - (4850-3300)MT/day=1,550MT/day
8.2 STEPS IN THE EVALUATION OF THE PROJECT
STEP1: Capital Budget Estimates :
The first and the foremost step in the evaluation of a project is the budget
estimate of the project. And here the estimate of the project is 300 crores.
This includes:-
1. Extension of Bagging Plant.
2. Conveyor System for extended portion of Bagging plant.
3. Shed for covering extended Bagging Plant.
68
Page 69
4. Railway siding modification.
5. Shed for covering extended portion of Bagging plant.
STEP2: Project Finance and Source of Funds :
The second step in the evaluation of the project is to find the funds to install
or to establish a project.
1. Debt/Loan Funds/Long term Loans
2. Internal Generation of funds
In this project we have funding of 75% from a bank at 11% rate of interest
P.a. providing with long term loans and the rest 25% from Internal
generation. With a moratorium of one year and repayment schedule of 5
years.
STEP3: Phasing of Capital Expenditure:
The third step in the evaluation of the project is the phasing of the expenses
or expenditure on the project. And here the phasing of the project
expenditure is as below:
PHASING OF CAPITAL EXPENDITURE (Rs in crores) 2012-13 2013-14 2014-15 TotalBank Loan 50.00 100.00 75.00 225.00Interest On LTL 6.88 32.90 15.40 55.17Internal Generation 20.00 35.00 20.00 75.00Total value Of the project 76.88 167.90 110.40 355.17
69
Page 70
Step4: Repayment Schedule of the Long Term Loan (LTL):
The fourth step in the evaluation of the project is preparing the repayment
schedule of the Long Term Loan (LTL). And here the project repayment
schedule is.
REPAYMENT SCHEDULE OF LONG-TERM LOAN11% (Rs in Crores)
Opening Balance Addition Total Repayment
Closing Balance
Interest '@11% p.a Year
Year wise Principal repayment
Year wise Interest repayment
1-Oct-12 75 75 75
1-Jan-13 75 100 175 175 2.06
1-Apr-13 175 125 300 300 4.81 2012-13 0 6.88
1-Jul-13 300 300 300 8.25
1-Oct-13 300 300 300 8.25
1-Jan-14 300 300 3.75 296.25 8.25
1-Apr-14 296.25 296.25 8.75 287.5 8.15 2013-14 12.5 32.90
1-Jul-14 287.5 287.5 15.00 272.5 7.91
1-Oct-14 272.5 272.5 15.00 257.5 7.49
1-Jan-15 257.5 257.5 15.00 242.5 7.08
1-Apr-15 242.5 242.5 15.00 227.5 6.67 2014-15 60.00 29.15
1-Jul-15 227.5 227.5 15.00 212.5 6.26
1-Oct-15 212.5 212.5 15.00 197.5 5.84
1-Jan-16 197.5 197.5 15.00 182.5 5.43
1-Apr-16 182.5 182.5 15.00 167.5 5.02 2015-16 60.00 22.55
1-Jul-16 167.5 167.5 15.00 152.5 4.61
1-Oct-16 152.5 152.5 15.00 137.5 4.19
1-Jan-17 137.5 137.5 15.00 122.5 3.78
1-Apr-17 122.5 122.5 15.00 107.5 3.37 2016-17 60.00 15.95
1-Jul-17 107.5 107.5 15.00 92.5 2.96
1-Oct-17 92.5 92.5 15.00 77.5 2.54
1-Jan-18 77.5 77.5 15.00 62.5 2.13
1-Apr-18 62.5 62.5 15.00 47.5 1.72 2017-18 60.00 9.35
1-Jul-18 47.5 47.5 15.00 32.5 1.31
1-Oct-18 32.5 32.5 15.00 17.5 0.89
1-Jan-19 17.5 17.5 11.25 6.25 0.48
1-Apr-19 6.25 6.25 6.25 0 0.17 2018-19 47.50 2.85
119.63
70
Page 71
REPAYMENT OF LONG TERM LOAN(LTL)(Rs in crores)
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19Interest Repaid 6.88 32.90 29.15 22.55 15.95 9.35 2.85Principal Repaid 0 12.5 60.00 60.00 60.00 60.00 47.50Total 6.88 45.40 89.15 82.55 75.95 69.35 50.35
STEP5: PREPARING THE PROFITABILITY STATEMENT OF THE
PROJECT:
The fifth step in the evaluation of the project is preparing the profitability
statement of the project and the profitability statement of the project here is.
Cost ElementsIn terms of cost of Asset p.a
Interest on Loan 11% Tax 32.445%
Insurance 2%
Depreciation as Per IT Act 15%
Salary and Wages 3% Contract Labour 2% Repairs and Maintenance 3% Chemicals 5% Packing cost 0.50% Power, Fuel and Water 5% Depreciation 5.25%
PROFITABILITY STATEMENT OF THE PROJECT (Rs in
71
Page 72
Crores) 2015-16 2016-17 2017-18 2018-19 2019-20Incremental Sales 1534.50 1534.50 1534.50 1534.50 1534.50 TOTAL REVENUE("A") 1534.50 1534.50 1534.50 1534.50 1534.50 EXPENDITURE Raw Materials 1227.60 1227.60 1227.60 1227.60 1227.60Interest On Loan 13.75 22.55 15.95 9.35 2.85Insurance 7.10 7.10 7.10 7.10 7.10Salary and Wages 10.66 10.66 10.66 10.66 10.66Contract labor 7.10 7.10 7.10 7.10 7.10Repairs and maintenance 10.66 10.66 10.66 10.66 10.66Chemicals 17.76 17.76 17.76 17.76 17.76Packaging Cost 1.78 1.78 1.78 1.78 1.78Power, Fuel and Water 17.76 17.76 17.76 17.76 17.76 TOTAL EXPENDITURE ("B") 1314.16 1322.96 1316.36 1309.76 1303.26
PROFITS BEFORE DEPRECIATION AND TAX "C"(C=A-B) 220.34 211.54 218.14 224.74 231.24 Less: DEPRECIATION "D" 18.65 18.65 18.65 18.65 18.65 PROFIT BEFORE TAX "E"(E=C-D) 201.69 192.89 199.49 206.09 212.59 Less: TAX(AS PER IT ACT) 60.77 58.34 60.16 61.98 63.77 PROFIT AFTER TAX 140.93 134.55 139.33 144.11 148.82
Computation of tax:COMPUTATION OF TAX
2015-16 2016-17 2017-18 2018-19 2019-20Profit Before Tax(PBT) 201.69 192.89 199.49 206.09 212.59
Add:Depreciation(As Per Companies Act) 18.65 18.65 18.65 18.65 18.65TOTAL 220.34 211.54 218.14 224.74 231.24 Less:Depreciation (as Per IT Act) 33.05 31.73 32.72 33.71 34.69 Profit After Depreciation 187.29 179.81 185.42 191.03 196.55 TAX 60.77 58.34 60.16 61.98 63.77
STEP6 : Valuation of the Asset:
72
Page 73
The sixth step in the evaluation of the project is the valuation of the project at different times or at different periods at different years to come in the future.
VALUATION OF THE ASSET (Rs In Crores) 2015-16 2016-17 2017-18 2018-19 2019-20 2021-22 2022-23Opening Balance 0.00 301.90 256.61 218.12 185.40 157.59 133.95Addition 355.17 0.00 0.00 0.00 0.00 0.00 0.00Total 355.17 301.90 256.61 218.12 185.40 157.59 133.95 Less:Deletion 0.00 0.00 0.00 0.00 0.00 0.00 0.00Total 355.17 301.90 256.61 218.12 185.40 157.59 133.95Less:Depreciation 53.28 45.28 38.49 32.72 27.81 23.64 43.46 ClOSING BALANCE 301.90 256.61 218.12 185.40 157.59 133.95 90.49
STEP7: Preparation of Cash Flow Statement:
The seventh step in the evaluation of the project is the preparation of the
Cash Flow Statement. And we need the cash flows to find out the Payback
Period and the Internal Rate of Return of the project
CASH FLOW STATEMENT (Rs in Crores)
2012-13
2013-14
2014-15
2015-16
2016-17
2017-18
2018-19
2019-20
Cash Out Flow Capital Expenditure on the Project 76.88 167.90 110.40 Cash In Flow
Incremental Profit After Tax 140.93 134.55 139.33 144.11 148.82
Step8: To Find the Viability of the Project by Using Different Techniques Of Capital Budgeting:
Here in PPL the Techniques of capital budgeting used are :
73
Page 74
1. Pay-Back Period Method
2. Internal Rate Of Return
1. Evaluation of the Project Using Pay Back Period Method:
It was estimated that the cash in-flows will start from 2015-2016
Cost of the Project- 355.18 Cr
Year 2015-16 2016-17 2017-18 2018-19 2019-20
Amount 140.93 134.55 139.33 144.11 148.82
Calculation Of Pay Back Period:
S.no Year Cash Inflows Cumulative Inflows1 2015-16 140.93 140.93
2 2016-17 134.55 275.48
3 2017-18 139.33 414.81
4 2018-19 144.11 558.92
5 2019-20 148.82 707.74
(a) Cash Outlay : 355.18 Cr
(b) Payback Period : INITIAL INVESTMENT
ANNUAL CASH FLOW = 2 + 79.70
74
Page 75
414.81
= 2.2 years
Pay Back Period:
It is assumed that the profit earning of the project will start from 2015-2016.
We should increase this period with same exception as there may be any
additional factor and other cause so rounding of 2.2 to 3 years will be right,
so that it will give more assistance to the calculation.
Suggestion: Any project which has a pay-back period of 3 to 5 years is
considered as a good project…
And here we have got a pay-back period of 2.2 years. So, the project can be
considered
2. Evaluation of the Project Using Internal Rate of Return Method:
It was estimated that the cash in-flows will start from 2015-2016Cost of the Project- 355.18 Cr
Year 2015-16 2016-17 2017-18 2018-19 2019-20
75
Page 76
Amount 140.93 134.55 139.33 144.11 148.82
Internal Rate of Return:
Discount rate taken as 24%
(in crores)
Sl. No Years Cash Inflows DCF (24%)
Present Values of Inflows
1 2015-16 140.93 .806 113.58
2 2016-17 134.55 .660 88.80
3 2017-18 139.33 .524 73.00
4 2018-19 144.11 .422 60.81
5 2019-20 148.82 .341 50.74
6
7
8
9
10
11
12
13
14
15
Total Present Values of Inflows 386.93
Discount rate taken as 26%
(in crores)
76
Page 77
Sl. No Years Cash Inflows DCF (26%)
Present Values of Inflows
1 2015-16 140.93 .787 110.91
2 2016-17 134.55 .620 83.421
3 2017-18 139.33 .488 68.00
4 2018-19 144.11 .384 55.34
5 2019-20 148.82 .302 50.74
6
7
8
9
10
11
12
13
14
15
Total Present Values of Inflows 366.412
Discount rate taken as 28%
(in crores)
Sl. No Years Cash Inflows DCF (28%)
Present Values of Inflows
77
Page 78
1 2015-16 140.93 .781 110.06
2 2016-17 134.55 .600 80.73
3 2017-18 139.33 .465 64.78
4 2018-19 144.11 .361 52.02
5 2019-20 148.82 .279 41.52
6
7
8
9
10
11
12
13
14
15
Total Present Values of Inflows 349.11
Calculation of Internal Rate of Return
I R R =
L + A - Cash out lay X (H – L)
78
Page 79
A-B
= 26+ 355.18 - 349.123 X (28-26)
(355.18-349.123) + (366.412-
355.18)
X 2
= 26 + 6.07 X 2
6.07+11.232
= 26 + 0.350 X 2
= 26.70
Internal Rate of Return (IRR):
In this calculation, is done on the basis of trail and errors. By taking various
percentage of (DCF).So that an appropriate percentage of Internal Rate of
Return can be judge out.
Calculated figure is 26.70%, so we can take it as 30% because at market
Uncertainity.
Suggestion:
Any project which has an Internal Rate of Return Between 16% to 20% is
considered as a good project…
And here for this project the Internal Rate of Return is 26.70%. So, the
project can be considered.
CHAPTER-9
FINDINGS AND SUGGESTIONS
79
Page 80
9.1 FINDINGS:
1 It was found that the payback Period of the project is 2 year and 2
months.
2 The Payback Period shows that the initial investment can be recovered
within a short period of time.
3 The investment is ideal because normally an investment should be
recoverable within 5 years.
4. The Internal Rate of Return shows 26.70 % This also ensures a profitable
investment.
9.2 SUGGESTIONS:
1. The company may fix the time period for the capital asset for
replacement.
2. The company may effectively use the available resources for attaining
maximum profit.
3. The company has to analyze the proposal for expansion or creating
additional capacity.
4. The company may plan and control its capital expenditure.
5. The company has to ensure that the funds must be invested in long
term project or not.
6. The company may evaluate the estimation of cost and benefit in terms
of cash flows.
80
Page 81
BIBLIOGRAPHY:
Financial Management- I. M. Pandey
Financial Management- Prasanna Chandra
Financial Management- M. Y. Khan & Jain
Financial Management - Shashi.K.Gupta, R.K.Sharma
and
Neeti gupta
PPL profile & Annual Reports
Web Sites:
URL: http://www.Paradeepphosphates.com
URL: http://www.google.com
URL: http://www.Wikipedia.com
81