Fault Codes

ARTICLE BEGINNING

AIR BAG RESTRAINT SYSTEMS DTCS

2000

DIAGNOSTIC TROUBLE CODE LIST DTC Possible Cause Descriptionwith fault code 1

with fault code 2

Except E class E class

001 001 SRS control module 2.0, see SRS & ETR DIAGNOSIS TESTS

1.0-3.1

2.0, see SRS & ETR DIAGNOSIS

TESTS 1.0-2.1002 004 Driver AB squib 3.0, see SRS & ETR

DIAGNOSIS TESTS 1.0-3.1 ; 4.0, see SRS

& ETR DIAGNOSISTESTS 4.0-5.1


TESTS 3.0-3.2 ; 4.0, see SRS & ETR

DIAGNOSISTESTS 3.3-5.0

003 005 Left front ETR squib 5.0, see SRS & ETR DIAGNOSIS TESTS 4.0-5.1 ; 6.0, see SRS

& ETR DIAGNOSISTESTS 5.2-7.0



DIAGNOSIS TESTS 5.1-6.0

004 006 Right front ETR squib 7.0, see SRS & ETR DIAGNOSIS TESTS 5.2-7.0 ; 8.0, see SRS

& ETR DIAGNOSIS TESTS 7.1-8.0




005 007 Front passenger AB squib

9.0, see SRS & ETR DIAGNOSIS TESTS 9.0-9.2 ; 10.0, see SRS & ETR DIAGNOSIS

TESTS 9.3-10.0


TESTS 8.0-9.2 ; 10.0, see SRS &

ETR DIAGNOSISTESTS 9.3-11.0

008 Left side airbag squib 15, see SRS & ETR DIAGNOSIS TESTS

14.0-15.0 ; 16, see SRS & ETR


15, see SRS & ETR DIAGNOSIS

TESTS 15.0-15.2 ; 16, see SRS & ETR


009 Right side airbag squib 17, see SRS & ETR DIAGNOSIS TESTS

16.2-17.1 ; 18, see SRS & ETR

17, 18, see SRS & ETR DIAGNOSIS

TESTS 17.0-18.0

Page 1 of 35DTC INDEX -2000 Mercedes-Benz S430

3/10/2012http://www.ondemand5.com/mric/common/asp/printart.aspx


010 004-009 016, 017 026, 029 034

Programming does not comply with vehicle

version

Verify vehicle version, repeat programming. See control module programming.

017 003 Circuit 15R, voltage supply (low voltage)

1.0, see SRS & ETR DIAGNOSIS TESTS

1.0-3.1


TESTS 1.0-2.1019 002 SRS MIL 11.0, see SRS & ETR



TESTS 9.3-11.0020 025 Front passenger seat

occupied recognition sensor


18.1-19.1


TESTS 19.0-20.0024 USA 016 USA Left front seat belt

buckle switch12.0, see SRS & ETR DIAGNOSIS TESTS

11.0-12.1


TESTS 12.0-13.1025 USA 017 USA Right front seat belt


13.0-13.1


TESTS 12.0-13.1073 Squib short circuit (to

each other)14.0, see SRS & ETR DIAGNOSIS TESTS

14.0-15.0


TESTS 13.2-14.0 018 Left side airbag, harness

fault16.0, see SRS & ETR DIAGNOSIS TESTS

15.4-16.1


TESTS 16.0-16.2 019, 020 Left side airbag, sensor

defectivereplace sensor

021 Right side airbag, harness fault


17.2-18.0


TESTS 17.0-18.0 022, 023 Right side airbag, sensor


027 Front passenger seat occupied recognition

with automatic child seat recognition (ACSR), communication, open

circuit, short


19.2-20.1


TESTS 19.0-20.0

028 Front passenger seat occupied recognition

with automatic child seat recognition (ACSR),

improperly positioned child seat or faulty, Connection between

passenger seat or child

Position child seat properly or replace



2000-01

DIAGNOSTIC TROUBLE CODE LIST

seat, short term electromagnetic interference in

immediate area such as electronic transmitters,

telephones, etc. 031 Front passenger seat

occupied recognition with automatic child seat

recognition (ACSR)

Replace ACSR

032 Left side airbag, (A53), communication

interference

Electromagnetic interference, check harnessrouting if accessories installed

033 Right side airbag, communication

interference


034 Digital crash output, harness fault (ARTHUR)

035 Analog crash output, harness fault (model 170

Kompressor)

B 1558 Automatic child seat recognition warning lamp, short circuit to ground, open circuit


21.0-22.1


TESTS 22.0-22.2

B1559 ACSR signal line short circuit to ground

20.0 see SRS & ETR DIAGNOSIS TESTS

19.2-20.1

20.0 see SRS & ETR DIAGNOSIS

TESTS 19.0-20.0

DTC Possible Cause Go to test stepwith fault code 1

with fault code 2

Except E class E class

001 001 SRS control module 2.0, see SRS & ETR DIAGNOSIS TESTS

1.0-3.1


TESTS 1.0-2.1002 004 Driver AB squib 3.0, see SRS & ETR

DIAGNOSIS TESTS 1.0-3.1 ; 4.0, see SRS





003 005 Left front ETR squib 5.0, see SRS & ETR DIAGNOSIS TESTS 4.0-5.1 ; 6.0, see SRS

& ETR DIAGNOSIS





TESTS 5.2-7.0 DIAGNOSIS TESTS 5.1-6.0

004 006 Right front ETR squib 7.0, see SRS & ETR DIAGNOSIS TESTS 5.2-7.0 ; 8.0, see SRS





005 007 Front passenger AB squib

9.0, see SRS & ETR DIAGNOSIS TESTS 9.0-9.2 ; 10.0, see SRS & ETR DIAGNOSIS

TESTS 9.3-10.0


TESTS 8.0-9.2 ; 10.0, see SRS &


008 Left side airbag squib 15, see SRS & ETR DIAGNOSIS TESTS

14.0-15.0 ; 16, see SRS & ETR


15, see SRS & ETR DIAGNOSIS

TESTS 15.0-15.2 ; 16, see SRS & ETR


009 Right side airbag squib 17, see SRS & ETR DIAGNOSIS TESTS

16.2-17.1 ; 18, see SRS & ETR


17, 18, see SRS & ETR DIAGNOSIS

TESTS 17.0-18.0

010 004-009 016, 017 026, 029 034

Programming does not comply with vehicle version

Verify vehicle version, repeat programming. See control module programming.

017 003 Circuit 15R, voltage supply (low voltage)


1.0-3.1


TESTS 1.0-2.1019 002 SRS MIL 11.0, see SRS & ETR



TESTS 9.3-11.0020 025 Front passenger seat

occupied recognition sensor


18.1-19.1


TESTS 19.0-20.0024 USA 016 USA Left front seat belt


11.0-12.1


TESTS 12.0-13.1025 USA 017 USA Right front seat belt


13.0-13.1


TESTS 12.0-13.1073 Squib short circuit (to

each other)14.0, see SRS & ETR DIAGNOSIS TESTS

14.0-15.0


TESTS 13.2-14.0 018 Left side airbag, harness 16.0, see SRS & ETR 16.0, see SRS &



fault DIAGNOSIS TESTS 15.4-16.1


019, 020 Left side airbag, sensor defective

replace sensor

021 Right side airbag, harness fault


17.2-18.0


TESTS 17.0-18.0 022, 023 Right side airbag, sensor


027 Front passenger seat occupied recognition with automatic child seat recognition (ACSR), communication, open circuit, short


19.2-20.1


TESTS 19.0-20.0

028 Front passenger seat occupied recognition with automatic child seat recognition (ACSR), improperly positioned child seat or faulty, Connection between passenger seat or child seat, short term electromagnetic interference in immediate area such as electronic transmitters, telephones, etc.

Position child seat properly or replace

031 Front passenger seat occupied recognition with automatic child seat recognition (ACSR)

Replace ACSR

032 Left side airbag, (A53), communication interference


033 Right side airbag, communication interference


034 Digital crash output, harness fault (ARTHUR)

035 Analog crash output, harness fault (model 170 Kompressor)

B 1558 Automatic child seat recognition warning lamp, short circuit to ground, open circuit


21.0-22.1


TESTS 22.0-22.2

B1559 ACSR signal line short 20.0 see SRS & ETR 20.0 see SRS & ETR



ENGINE PERFORMANCE DTCS

ENGINE 275.950 /980 IN MODELS 215, 220

2000-07

ENGINE PERFORMANCE DIAGNOSTIC TROUBLE CODE LIST

circuit to ground DIAGNOSIS TESTS 19.2-20.1


DTC (Display on Generic Scan Tool)

Possible Cause Description

P2001 (-) Boost pressure control, ME-SFI fault code description

Boost pressure control, ME-SFI fault code description

P2002 (-) Charge air cooler circulation pump, ME-SFI fault code description

Charge air cooler circulation pump, ME-SFI fault code

descriptionP2003 (P0410) ME-SFI secondary air injection

malfunction (causal chain) - fault code description ME2.7.1 and ME2.7.2 Up to model year 2007

ME-SFI secondary air injection malfunction (causal

chain) - fault codedescription

P2005 (P0118) Coolant temperature sensor ME-SFI - fault code description

Coolant temperature sensorME-SFI - fault code

descriptionP2005 (P0117) Coolant temperature sensor

ME-SFI - fault code description

Coolant temperature sensor ME-SFI - fault code






Coolant temperature sensor ME-SFI - fault code

descriptionP2006 (P0112) Charge air temperature sensor,

ME-SFI fault code descriptionCharge air temperature

sensor, ME-SFI fault code description

P2006 (P0113) Charge air temperature sensor, ME-SFI fault code description

Charge air temperature sensor, ME-SFI fault code

descriptionP2006 (P0110) Charge air temperature sensor,

ME-SFI fault code descriptionCharge air temperature

sensor, ME-SFI fault code description

P2006 (P0111) Charge air temperature sensor, ME-SFI fault code description

Charge air temperature sensor, ME-SFI fault code



descriptionP2007 (P0108) Pressure sensor ME-SFI - fault

code description Pressure sensor downstream of throttle valve actuator (B28/7)

Pressure sensor ME-SFI -fault code description

P2007 (P0107) Pressure sensor ME-SFI - fault code description Pressure sensor downstream of throttle valve actuator (B28/7)






P2008 (P0135) O2-sensor heating - fault code description ME-SFI

O2 sensor heating - fault code description ME-SFI

P2009 (P0141) O2-sensor heating - fault code description ME-SFI


P200A (P0324) Knock control hardware fault in the control unit ME-SFI fault code description

Knock control hardwarefault in the control unit ME-

SFI fault code descriptionP200B (P0422) Fault code description - three-

way catalytic converter effectiveness too low

Fault code description -three-way catalytic converter

effectiveness too lowP200C (P0133) Aging O2 sensor upstream of

CAT, ME-SFI fault code description Correction value exceeded

Aging O2 sensor upstream of CAT, ME-SFI fault code

description

P200D (P0133) Aging of O2 sensor upstream of CAT, ME-SFI fault code description Cycle duration too long


description

P200E (-) O2 sensor signal, ME-SFI fault code description O2 sensor downstream of TWC (G3/5, G3/6), no sensor condition change

O2 sensor signal, ME-SFIfault code description

P200F (P0132) O2 sensor signal, ME-SFI fault code description O2 sensor upstream of TWC, electrical fault

O2 sensor signal, ME-SFI fault code description







P2010 (P0138) O2 sensor signal, ME-SFI fault code description O2 sensor downstream of TWC, electrical fault






P2011 (P0325) Knock sensor ME-SFI - fault code description

Knock sensor ME-SFI - fault code description





P2012 (P0446) Activated charcoal canister shut-off valve MESFI - fault code description

Activated charcoal canister shut-off valve ME-SFI - fault

code descriptionP2012 (P2421) Activated charcoal canister

shut-off valve MESFI - fault code description





code descriptionP2013 (P0455) Regeneration system leaking

(causal chain) ME-SFI - fault code description

Regeneration system leaking (causal chain) ME-SFI - fault







code descriptionP2016 (P0172) Self-adjustment of mixture

formation at its limit - fault code description ME-SFI In the case of part load

Self-adjustment of mixtureformation at its limit - fault

code description ME-SFI

P2016 (P0171) Self-adjustment of mixture formation at its limit - fault code description ME-SFI In the case of part load





P2017 (-) Self-adjustment of mixture formation at its limit - fault code description ME-SFI during idling

Self-adjustment of mixture formation at its limit - fault


P2018 (-) Self-adjustment of mixture formation at its limit - fault code description ME-SFI during idling



P2019 (-) Antiboil protection for coolant, ME-SFI fault code description

Antiboil protection forcoolant, ME-SFI fault code

descriptionP201A (P0341) Camshaft Hall sensor - fault

code description ME-SFICamshaft Hall sensor - fault

code description ME-SFIP201B (P0563) ME-SFI [ME] control unit

voltage supply - fault code description

ME-SFI [ME] control unitvoltage supply - fault code

descriptionP201B (P0562) ME-SFI [ME] control unit


ME-SFI [ME] control unit voltage supply - fault code

descriptionP201B (P0561) ME-SFI [ME] control unit


ME-SFI [ME] control unitvoltage supply - fault code

descriptionP201C (P0453) Tank pressure sensor ME-SFI -

fault code descriptionTank pressure sensor ME-SFI - fault code description

P201C (P0452) Tank pressure sensor ME-SFI -fault code description

Tank pressure sensor ME-SFI - fault code description

P201C (P0451) Tank pressure sensor ME-SFI -fault code description


P201D (P0201) Fault code description for fuel injection valves, ME-SFI

Fault code description forfuel injection valves, ME-SFI





P201E (P0205) Fault code description for fuel injection valves, ME-SFI






P201F (P0203) Fault code description for fuel injection valves, ME-SFI






P2020 (P0206) Fault code description for fuel Fault code description for



injection valves, ME-SFI fuel injection valves, ME-SFIP2020 (P0277) Fault code description for fuel

injection valves, ME-SFIFault code description for

fuel injection valves, ME-SFIP2020 (P0276) Fault code description for fuel














fuel injection valves, ME-SFIP2023 (P0410) Secondary air injection relay,

ME-SFI fault code descriptionSecondary air injection relay,

ME-SFI fault code description

P2023 (P2258) Secondary air injection relay, ME-SFI fault code description

Secondary air injection relay, ME-SFI fault code

descriptionP2023 (P2257) Secondary air injection relay,

ME-SFI fault code descriptionSecondary air injection relay,


P2024 (P0412) Air pump switchover valve - fault code description, ME-SFI

Air pump switchover valve -fault code description, ME-

SFIP2024 (P0414) Air pump switchover valve -

fault code description, ME-SFIAir pump switchover valve -fault code description, ME-

SFIP2024 (P0413) Air pump switchover valve -

fault code description, ME-SFIAir pump switchover valve -fault code description, ME-

SFIP2025 (P0446) Activated charcoal canister









code descriptionP2026 (P0443) Fault code description for

purge control valve, ME-SFIFault code description for

purge control valve, ME-SFIP2026 (P0444) Fault code description for Fault code description for



purge control valve, ME-SFI purge control valve, ME-SFIP2026 (P0445) Fault code description for


purge control valve, ME-SFIP2026 (P0458) Fault code description for


purge control valve, ME-SFIP2026 (P0459) Fault code description for


purge control valve, ME-SFIP2027 (-) Divert air switchover valve,

ME-SFI fault code descriptionDivert air switchover valve,


P2028 (P0410) ME-SFI secondary air injection malfunction (causal chain) - fault code description ME2.7.1 and ME2.7.2 up to model year 2007


chain) - fault codedescription

P2029 (P0410) ME-SFI secondary air injection malfunction (causal chain) - fault code description ME2.7.1 and ME2.7.2 up to model year 2007


chain) - fault code description

P202C (P0128) Coolant thermostat - fault code description, ME-SFI

Coolant thermostat - faultcode description, ME-SFI

P202D (P0125) Coolant temperature sensor ME-SFI - fault code description Plausibility


description

P202E (P0120) Throttle valve actuator ME-SFI - fault code description Adjustment

Throttle valve actuator ME-SFI - fault code description

P202E (P0638) Throttle valve actuator ME-SFI - fault code description Adjustment


P202F (P0600) CAN fault detection ME-SFI - fault code description

CAN fault detection ME-SFI- fault code description

P2030 (P0600) CAN fault detection ME-SFI - fault code description


P2030 (U0111) CAN fault detection ME-SFI - fault code description


P2031 (-) CAN fault detection ME-SFI - fault code description


P2032 (P0120) Throttle valve actuator ME-SFI - fault code description ME2.7.1 Actual value potentiometer


P2033 (-) Pressure sensor ME-SFI - fault code description Comparison of pressure values


P2034 (P0335) Fault code description for Fault code description for



crankshaft position sensor, ME-SFI

crankshaft position sensor, ME-SFI

P2035 (-) Boost pressure control pressure transducer, ME-SFI fault code description

Boost pressure control pressure transducer, ME-SFI

fault code descriptionP2036 (P0600) CAN fault detection ME-SFI -

fault code descriptionCAN fault detection ME-SFI

- fault code descriptionP2037 (P0600) CAN fault detection ME-SFI -

fault code description CAN message from ETC [EGS] control unit (N15/3), transmission 722.6








P2039 (-) Oil sensor - fault code description, ME-SFI

Oil sensor - fault code description, ME-SFI

P203A (P0460) Fill level in fuel tank, ME-SFI fault code description

Fill level in fuel tank, ME-SFI fault code description

P203B (P0221) ME-SFI [ME] control unit - fault code description, ME-SFIFunction monitoring

ME-SFI [ME] control unit -fault code description, ME-

SFIP203C (P0221) ME-SFI [ME] control unit -

fault code description, ME-SFIFunction monitoring

ME-SFI [ME] control unit -fault code description, ME-

SFIP203D (-) Angular deviation of camshaft

to crankshaft, ME-SFI fault code description

Angular deviation of camshaft to crankshaft, ME-

SFI fault code descriptionP203E (P0600) CAN fault detection ME-SFI -

fault code description CAN message from instrument cluster (A1)

CAN fault detection ME-SFI - fault code description

P203F (-) Pressure sensor ME-SFI - fault code description Pressure sensor upstream throttle valve actuator (B28/6)



Oil sensor - fault code description, ME-SFI


Oil sensor - fault codedescription, ME-SFI

P2042 (-) Safety fuel shut-off detected, ME-SFI fault code description

Safety fuel shut-off detected, ME-SFI fault code

descriptionP2043 (P0300) Fault code description - ME-

SFI - misfires Fault code description - ME-

SFI - misfires



Emission limitP2044 (P0301) Fault code description - ME-

SFI - misfires Emission limit

Fault code description - ME-SFI - misfires

P2045 (P0305) Fault code description - ME-SFI - misfires Emission limit










P204A (P0307) Fault code description - ME-SFI - misfires Emission limit


P204B (P0311) Fault code description - ME-SFI - misfires Emission limit


P204C (P0309) Fault code description - ME-SFI - misfires Emission limit


P204D (P0312) Fault code description - ME-SFI - misfires Emission limit


P204E (P0308) Fault code description - ME-SFI - misfires Emission limit


P204F (P0310) Fault code description - ME-SFI - misfires Emission limit


P2050 (P0300) Fault code description - ME-SFI - misfires TWC deteriorating






P2053 (P0303) Fault code description - ME-SFI - misfires




TWC deterioratingP2054 (P0306) Fault code description - ME-

SFI - misfires TWC deteriorating












P205A (P0312) Fault code description - ME-SFI - misfires TWC deteriorating


P205B (P0308) Fault code description - ME-SFI - misfires TWC deteriorating


P205C (P0310) Fault code description - ME-SFI - misfires TWC deteriorating


P205D (-) Alternator - fault code description ME

Alternator - fault codedescription ME

P205E (P0702) ETC control unit ME-SFI - fault code description Transmission 722.6

ETC control unit ME-SFI -fault code description

P205F (P0753) 1-2/4-5 shift solenoid valve, ME-SFI fault code descriptionTransmission 722.6

1-2/4-5 shift solenoid valve, ME-SFI fault code

descriptionP2060 (P0758) 2-3 shift solenoid valve, ME-

SFI fault code description Transmission 722.6

2-3 shift solenoid valve, ME-SFI fault code description

P2061 (P0763) 3-4 shift solenoid valve, ME-SFI fault code description Transmission 722.6

3-4 shift solenoid valve, ME-SFI fault code description

P2062 (P0743) Torque converter lockup PWM solenoid valve, ME-SFI fault code description Transmission 722.6

Torque converter lockup PWM solenoid valve, ME-SFI fault code description

P2063 (P0748) Modulating pressure control solenoid valve, ME-SFI fault

Modulating pressure control solenoid valve, ME-SFI fault



code description Transmission 722.6

code description

P2064 (P0748) Shift pressure control solenoid valve, ME-SFI fault code description Transmission 722.6

Shift pressure control solenoid valve, ME-SFI fault

code description

P2065 (P0702) Valve supply voltage, ME-SFI fault code description Transmission 722.6

Valve supply voltage, ME-SFI fault code description

P2066 (P0715) Rpm sensor supply voltage and function, MESFI fault code description Transmission 722.6

Rpm sensor supply voltage and function, MESFI fault

code description

P2067 (P0705) ETC control unit ME-SFI - fault code description Transmission 722.6


P2068 (P0720) ETC control unit ME-SFI - fault code description Transmission 722.6


P2069 (P0700) Gear implausible or transmission leaking, ME-SFI fault code description Transmission 722.6

Gear implausible or transmission leaking, ME-SFI fault code description

P206A (P0700) Command valve jams in pressure position, ME-SFI fault code description Transmission 722.6

Command valve jams inpressure position, ME-SFI

fault code description

P206B (P0740) Torque converter lockup clutch, ME-SFI fault code description

Torque converter lockupclutch, ME-SFI fault code

descriptionP206D (P0730) Gear comparison negative

(several times), ME-SFI fault code description Transmission 722.6

Gear comparison negative (several times), ME-SFI fault

code description

P2071 (-) CAN fault detection ME-SFI - fault code description CAN message from EIS [EZS] control unit (N73)


P2072 (P0450) Tank pressure sensor ME-SFI -fault code description


P2073 (-) Electrical suction-type fan - fault code description, ME-SFI

Electrical suction-type fan -fault code description, ME-

SFIP2075 (P0446) Regeneration system leaking



code descriptionP2076 (-) Oil sensor - fault code

description, ME-SFIOil sensor - fault code

description, ME-SFI



P2077 (-) Pressure sensor ME-SFI - fault code description Pressure sensor downstream of air filter (B28/4, B28/5)




P2079 (-) CAN fault detection ME-SFI - fault code description ME2.7.1 CAN signal speed limiter


P207A (-) CAN fault detection ME-SFI - fault code description ME2.7.1 CAN signal speed limiter


P207B (-) CAN fault detection ME-SFI - fault code description ME2.7.1 CAN message from selection lever position from ETC [EGS] control unit (N15/3), transmission 722.6




P208A (P0207) Fault code description for fuel injection valves, ME-SFI

Fault code description for fuel injection valves, ME-SFI





P208B (P0211) Fault code description for fuel injection valves, ME-SFI






P208C (P1324) Knock control hardware fault in the control unit ME-SFI fault code description

Knock control hardwarefault in the control unit ME-

SFI fault code descriptionP208D (P0330) Knock sensor ME-SFI - fault

code descriptionKnock sensor ME-SFI - fault

code descriptionP208D (P0332) Knock sensor ME-SFI - fault


code descriptionP208D (P0333) Knock sensor ME-SFI - fault


code description



P208E (P1330) Knock sensor ME-SFI - fault code description






P2093 (-) Alternator - fault code description ME

Alternator - fault code description ME

P2094 (P0620) Alternator - fault code description ME

Alternator - fault codedescription ME

P2095 (P0620) Alternator - fault code description ME


P2096 (P1108, P2229) Pressure sensor ME-SFI - fault code description Ambient pressure sensor in ME-SFI [ME] control unit






P2097 (-) Throttle valve actuator ME-SFI - fault code description Throttle valve jamming


P2098 (-) Crash signal implausible - fault code description, ME-SFI

Crash signal implausible -fault code description, ME-

SFIP20A3 (P0432) Fault code description - three-

way catalytic converter effectiveness too low

Fault code description -three-way catalytic converter

effectiveness too lowP20A5 (P0153) Aging O2 sensor upstream of

CAT, ME-SFI fault code description Correction value exceeded


description

P20A7 (P0153) Aging O2 sensor upstream of CAT, ME-SFI fault code description Cycle duration too long


description

P20A9 (P0152) O2 sensor signal, ME-SFI fault code description O2 sensor upstream of TWC, electrical fault


P20A9 (P0154) O2 sensor signal, ME-SFI fault code description O2 sensor upstream of TWC,




electrical faultP20A9 (P0150) O2 sensor signal, ME-SFI fault

code description O2 sensor upstream of TWC, electrical fault


P20AB (P0158) O2 sensor signal, ME-SFI fault code description O2 sensor downstream of TWC, electrical fault






P20AD (P0174) Self-adjustment of mixture formation at its limit - fault code description ME-SFI In the case of part load



P20AD (P0175) Self-adjustment of mixture formation at its limit - fault code description ME-SFI In the case of part load



P20AF (-) Self-adjustment of mixture formation at its limit - fault code description ME-SFI During idling



P20B1 (-) Self-adjustment of mixture formation at its limit - fault code description ME-SFI During idling



P20B3 (P0155) O2-sensor heating - fault code description ME-SFI


P20B5 (P0161) O2-sensor heating - fault code description ME-SFI


P20B7 (-) Pressure sensor ME-SFI - fault code description Pressure sensor downstream of air filter (B28/4, B28/5)


P20B8 (P0346) Camshaft Hall sensor - fault code description ME-SFI

Camshaft Hall sensor - fault code description ME-SFI

P20B9 (P0209) Fault code description for fuel injection valves, ME-SFI


P20B9 (P0286) Fault code description for fuel injection valves, ME-SFI


P20B9 (P0285) Fault code description for fuel Fault code description for



injection valves, ME-SFI fuel injection valves, ME-SFIP20BA (P0212) Fault code description for fuel


fuel injection valves, ME-SFIP20BA (P0295) Fault code description for fuel


fuel injection valves, ME-SFIP20BA (P0294) Fault code description for fuel


fuel injection valves, ME-SFIP20BB (P0208) Fault code description for fuel






fuel injection valves, ME-SFIP20BC (P0210) Fault code description for fuel






fuel injection valves, ME-SFIP20BD (-) Angular deviation of camshaft

to crankshaft, ME-SFI fault code description

Angular deviation ofcamshaft to crankshaft, ME-

SFI fault code descriptionP20BE (P0135) O2-sensor heating - fault code

description ME-SFI Power supply


P20C0 (P0155) O2-sensor heating - fault code description ME-SFI Power supply






P20C6 (-) O2 sensor signal, ME-SFI fault code description O2 sensor downstream of TWC (G3/5, G3/6), no sensor condition change


P20CA (P0500) CAN fault detection ME-SFI - fault code description ME2.7.1: CAN messages from ESP control unit


P20CB (P0500) CAN fault detection ME-SFI - fault code description ME2.7.1: CAN messages from ESP




control unitP20CC (-) CAN fault detection ME-SFI -

fault code description ME2.7.1: CAN messages from ESP control unit


P20CD (-) Air conditioning, ME-SFI fault code description ME2.7.1

Air conditioning, ME-SFIfault code description

P20CE (-) Air conditioning, ME-SFI fault code description ME2.7.1


P20CF (P0121) Fault code description for pedal value sensor, ME-SFI

Fault code description forpedal value sensor, ME-SFI

P20D0 (-) Air conditioning, ME-SFI fault code description ME2.7.1


P20D1 (-) CAN fault detection ME-SFI - fault code description CAN transmission error from DTR control unit (N63/1)






P20D4 (-) Load limitation active, ME-SFI fault code description

Load limitation active, ME-SFI fault code description

P20D4 (P0221) Load limitation active, ME-SFI fault code description

Load limitation active, ME-SFI fault code description

P20D5 (P0702) ETC control unit ME-SFI - fault code description Transmission 722.6






P20D8 (-) ESP control unit - fault code description, MESFI

ESP control unit - fault code description, MESFI

P20D9 (-) ESP control unit - fault code description, MESFI


P20DA (-) ESP control unit - fault code description, MESFI




P20DB (-) ESP control unit - fault code description, MESFI


P20DC (P0122) Fault code description for pedal value sensor, ME-SFI


P20DD (P0123) Fault code description for pedal value sensor, ME-SFI


P20DE (P0222) Fault code description for pedal value sensor, ME-SFI


P20DF (P0223) Fault code description for pedal value sensor, ME-SFI


P20E1 (-) Charge air cooler circulation pump, ME-SFI fault code description

Charge air cooler circulation pump, ME-SFI fault code

descriptionP20E2 (-) Boost pressure control, ME-

SFI fault code descriptionBoost pressure control, ME-

SFI fault code descriptionP20E3 (P0123) Fault code description for

pedal value sensor, ME-SFIFault code description for

pedal value sensor, ME-SFIP20E3 (P0122) Fault code description for

pedal value sensor, ME-SFIP20E4 (-) CAN fault detection ME-SFI -

fault code description Signal from brake light switch (S9/1)


P20E5 (-) CAN fault detection ME-SFI - fault code description Signal from brake light switch (S9/1)


P20E6 (-) CAN fault detection ME-SFI - fault code description Signal from brake light switch (S9/1)


P20E7 (P0300) Ignition system ECI, ME-SFI fault code description Ignition module ECI, ECI power pack

Ignition system ECI, ME-SFI fault code description

P20E8 (P0300) Ignition system ECI, ME-SFI fault code description Ignition module ECI, ECI power pack


P20EC (P0620) Alternator - fault code description ME


P20ED (-) Spark plug a or b of a cylinder, ME-SFI fault code description

Spark plug a or b of acylinder, ME-SFI fault code

descriptionP20EE (-) Spark plug a or b of a cylinder,

ME-SFI fault code descriptionSpark plug a or b of a

cylinder, ME-SFI fault code description

P20EF (-) Spark plug a or b of a cylinder, Spark plug a or b of a



ENGINE 113 IN MODELS 220

2001-02


ME-SFI fault code description cylinder, ME-SFI fault code description

P20F0 (-) Spark plug a or b of a cylinder, ME-SFI fault code description


descriptionP20F1 (-) Spark plug a or b of a cylinder,





descriptionP20F3 (P0300) Ignition system ECI, ME-SFI

fault code description Ignition module ECI, ECI power pack


P20F4 (P0300) Ignition system ECI, ME-SFI fault code description Ignition module ECI, ECI power pack




descriptionP20FA (-) Spark plug a or b of a cylinder,



P20FB (-) Spark plug a or b of a cylinder, ME-SFI fault code description


descriptionP20FC (-) Spark plug a or b of a cylinder,



P20FD (-) Spark plug a or b of a cylinder, ME-SFI fault code description


descriptionP20FE (-) Spark plug a or b of a cylinder,



DTC Possible CauseP0100 Hot Film MAF Sensor (B2/5)P0105 Pressure Sensor (B28)P0110 Intake Air Temperature Sensor (B2/5)



P0115 Coolant Temperature Sensor (B11/4)P0120 Actual Value Potentiometer In Throttle Valve Actuator (M16/6)P0130 Right O2 Sensor Upstream TWC (G3/4)P0130 Right O2 Sensor Upstream TWC (G3/4) Voltage Too SmallP0133 Right O2 Sensor Upstream TWC (G3/4) Aging Correction

Variable ExceededP0133 Right O2 Sensor Upstream TWC (G3/4) Aging Of Cycle Duration

Too LongP0133 Right O2 Sensor Upstream TWC (G3/4) Aging Of Oxygen Sensor

Too SlowP0135 O2 Sensor Heating Of Right O2 Sensor Upstream TWC (G3/4)P0136 Right O2 Sensor Downstream TWC (G3/6)P0140 Right O2 Sensor Upstream TWC (G3/4)P0141 O2 Sensor Heating Of Right O2 Sensor Downstream TWC (G3/6)P0150 Left O2 Sensor Upstream TWC (G3/3)P0150 Left O2 Sensor Upstream TWC (G3/3) Voltage Increase Too

SmallP0153 Left O2 Sensor Upstream TWC (G3/3)P0153 Left O2 Sensor Upstream TWC (G3/3) Aging Of Cycle Duration

To LongP0153 Left O2 Sensor Upstream TWC (G3/3) Aging Of Oxygen Sensor

Too SlowP0155 O2 Sensor Heating Of Left O2 Sensor Upstream TWC (G3/3)P0156 Left O2 Sensor Downstream TWC (G3/5)P0160 Left O2 Sensor Downstream TWC (G3/5)P0161 O2 Sensor Heating Of Left O2 Sensor Downstream TWC (G3/5)P0170 Self-Adaption Of Partial Load Mixture Formation, Right Cylinder

Bank, To Limit Value Of ME-SFI Control Module (N3/10)P0170 Self-Adaption Of Idle Mixture Formation, Right Cylinder Bank,

To Limit Value Of ME-SFI Control Module (N3/10)P0173 Self-Adaptation Of Partial Load Mixture Formation, Left Cylinder

Bank, To Limit Value Of ME-SFI Control Module (N3/10)P0173 Self-Adaptation Of Idle Mixture Formation, Left Cylinder Bank,

To Limit Value Of ME-SFI Control Module (N3/10)P0201 Cylinder 1 Injector (Y62y1)P0202 Cylinder 2 Injector (Y62y2)P0203 Cylinder 3 Injector (Y62y3)P0204 Cylinder 4 Injector (Y62y4)P0205 Cylinder 5 Injector (Y62y5)P0206 Cylinder 6 Injector (Y62y6)P0207 Cylinder 7 Injector (Y62y7)P0208 Cylinder 8 Injector (Y62y8)P0300 Misfire Or Misfire Damaging To TWCP0301 Misfire Cylinder 1 Or Misfire Cylinder 1 Damaging To TWCP0302 Misfire Cylinder 2 Or Misfire Cylinder 2 Damaging To TWC



P0303 Misfire Cylinder 3 Or Misfire Cylinder 3 Damaging To TWCP0304 Misfire Cylinder 4 Or Misfire Cylinder 4 Damaging To TWCP0305 Misfire Cylinder 5 Or Misfire Cylinder 5 Damaging To TWCP0306 Misfire Cylinder 6 Or Misfire Cylinder 6 Damaging To TWCP0307 Misfire Cylinder 7 Or Misfire Cylinder 7 Damaging To TWCP0308 Misfire Cylinder 8 Or Misfire Cylinder 8 Damaging To TWCP0325 Knock Sensor, RightP0330 Knock Sensor, LeftP0335 Crankshaft Position Sensor (L5)P0341 Camshaft Hall Sensor (B6/1)P0370 Angle Deviation Between Camshaft To CrankshaftP0400 Exhaust Gas Recirculation Malfunction (Causal Chain)P0410 Secondary Air Injection Malfunction (Causal Chain)P0422 Effect Of Right TWC Too LowP0432 Effect Of Left TWC Too LowP0440 Purge System Leak (Causal Chain)P0441 Purge Control Valve (Y58/1), FunctionP0442 Purge System Slight LeakP0443 Purge Control Valve (Y58/1)P0446 Activated Charcoal Canister Shut-Off Valve (Y58/4) (Causal

Chain)P0446 Activated Charcoal Canister Shut-Off Valve (Y58/4)P0450 Fuel Tank Pressure Sensor (B4/3) Electrical FaultP0450 Fuel Tank Pressure Sensor (B4/3) Electrical VibrationsP0455 Purge System Severe Leak Or Voltage Supply For Tank Pressure

Sensor (B4/3)P0460 Fuel Level Gauge SensorP0500 Front Left Vehicle Speed Signal Or Rear Left Vehicle Speed

SignalP0507 Idle Speed Control ImplausibleP0520 Oil Pressure Sensor For Cylinder Cut-Out SystemP0560 Voltage Supply To ME-SFI Control Module (N3/10)P0565 Pushbutton Switch For Variable Cruise Control (S40/4)P0600 Controller Area Network (CAN) Of Electronic Stability Program

(ESP)P0604 ME-SFI Control Module (N3/10)P0605 ME-SFI Control Module (N3/10)P0700 Read Out DTC Memory For Electronic Transmission Control

(ETC) Module (N15/3)P0702 Read Out DTC Memory For Electronic Transmission Control



(ETC) Module (N15/3)



P0730 Read Out DTC Memory For Electronic Transmission Control(ETC) Module (N15/3)







P0801 Electric Suction-Type Fan For Engine & A/C (M4/3)P0802 Variable Intake Manifold Switchover Valve (Y22/6)P0809 Angle For Camshaft To CrankshaftP0811 Controller Area Network (CAN) Of Electronic Ignition Switch

(EIS)P1031 O2 Sensor Upstream Of TWC (G3/3) & (G3/4) ExchangedP1177 Oil Sensor (B40), Oil Temperature ImplausibleP1178 Oil Sensor (B40), Oil Level ImplausibleP1179 Oil Sensor (B40), Oil Quality ImplausibleP1180 Oil Sensor (B40), Oil Temperature Too HighP1181 Electric Suction-Type Fan For Engine & A/C (M4/3)P1183 Cylinder Cut-Out System Valve On Right Cylinder Bank (Y80)P1184 Cylinder Cut-Out System Valve On Left Cylinder Bank (Y81)P1185 Oil Sensor (B40), Water In OilP1186 Safety Fuel Shut-Off RecognizedP1225 Variable Intake Manifold Switchover Valve (Y22/6)P1233 Throttle Valve Actuator (M16/6) Sticks (Iced)P1355 Cylinder Cut-Out System Valve On Right Cylinder Bank (Y80)P1356 Cylinder Cut-Out System Valve On Left Cylinder Bank (Y81)P1357 Cylinder Cut-Out System ON, Intake Valve Of Cylinder 2, 3, 5 or

8 Is Still ActuatedP1358 Cylinder Cut-Out System OFF, Exhaust Valve Of Cylinder 5 Is

Not ActuatedP1359 Cylinder Cut-Out System OFF, Exhaust Valve Of Cylinder 2 Is



Not ActuatedP1366 Emission Throttle Switchover ValveP1380 One Intake Valve Of A Cylinder Is Not Actuated With Cylinder



ENGINE 113 IN MODELS 215, 220

1998-2002


Cut-Out System OFFP1386 Anti-Knock Control By ME-SFI Control Module (N3/10) At

Control StopP1400 EGR Transducer (Y31/1)P1420 Air Pump Switchover Valve (Y32)P1453 Air Pump RelayP1491 Refrigerant Pressure In A/C System Too HighP1542 Pedal Value Sensor (B37)P1570 Starting Authorization From Drive Authorization System (DAS)

Not Granted, Start Attempted With Locked DASP1570 Starting Authorization From Drive Authorization System (DAS)

Not Granted, Controller Area Network (CAN) From DAS Control Module To ME-SFI Control Module (N3/10) Damaged

P1570 Starting Authorization From Drive Authorization System (DAS) Not Granted, ME-SFI Control Module (N3/10) & DAS Control

Module Do Not MatchP1580 Throttle Valve Actuator (M16/6)P1584 Stop Light SwitchP1603 Controller Area Network (CAN) Of Electronic Ignition Switch

(EIS)P1605 Signal For Poor Road Detection (By Comparing Wheel Speeds)P1642 ME-SFI Control Module (N3/10) Coded IncorrectlyP1644 Transmission Versions Cannot Be Checked Due To Undervoltage

At Electronic Transmission Control (ETC) Control Module(N15/3)

P1666 Cylinder Cut-Out System Valve Does Not Open With CylinderCut-Out System ON

P1681 Crash Signal ImplausibleP1747 Controller Area Network (CAN) Fault, Transmission Protection

Malfunction Of Electronic Transmission Control (ETC) Module (N15/3)

P1747 Controller Area Network (CAN) Fault, Instrument Cluster

DTC Definition Test Step/RemedyP0100 MAF Circuit Malfunction 4, see Fuel Injection System Test

(Steps 3.0-4.0)P0105 MAP Circuit Malfunction

Only USA vehicles with cylinder shutoff6, see Fuel Injection System Test

(Step 6.0)P0110 IAT Circuit Malfunction 5, see FUEL INJECTION

SYSTEM TEST (STEPS 5.0 & 5.1)



P0115 ECT Circuit Malfunction 8, see FUEL INJECTION SYSTEM TEST (STEPS 8.0 & 8.1)

P0120 Throttle Position Circuit Malfunction 3, see ELECTRONIC ACCELERATOR TEST (STEPS

3.0 & 3.1)P0130 O2S-1 Circuit Malfunction 11, see Fuel Injection System Test

(Steps 11.0-12.0)P0133 O2S-1 Circuit Slow Response 11, see Fuel Injection System Test

(Steps 11.0-12.0)P0135 O2S-1 Heater Circuit Malfunction 13, see FUEL INJECTION


P0136 O2S-2 Circuit Malfunction Only USA

15, see FUEL INJECTION SYSTEM TEST (STEPS 15.0 &

16.0)P0140 O2S-2 Heater Circuit Malfunction 11, see Fuel Injection System Test

(Steps 11.0-12.0)P0141 O2S-2 Heater Circuit Malfunction

Only USA17, see FUEL INJECTION


P0150 O2S-1 Circuit Malfunction 10, see Fuel Injection System Test (Steps 8.2-10.0)

P0153 O2S-1 Circuit Slow Response 10, see Fuel Injection System Test(Steps 8.2-10.0)

P0155 O2S-2 Circuit Malfunction 12, see Fuel Injection System Test (Steps 11.0-12.0)

P0156 O2S-2 Circuit Malfunction Only USA


14.0)P0160 O2S Heater Circuit Malfunction 10, see Fuel Injection System Test

(Steps 8.2-10.0)P0161 O2S-2 Heater Circuit Malfunction



P0170 Fuel Trim Malfunction Intake air leak, injectors, diaphragm pressure regulator, engine wear

P0173 Fuel Trim Malfunction Intake air leak, injectors, diaphragmpressure regulator, engine wear

P0201 Injector Circuit Malfunction Cyl. 1 18, see FUEL INJECTION SYSTEM TEST (STEPS 17.0 &

18.0)P0202 Injector Circuit Malfunction Cyl. 2 19, see Fuel Injection System Test

(Step 19.0)P0203 Injector Circuit Malfunction Cyl. 3 20, see Fuel Injection System Test

(Step 20.0)P0204 Injector Circuit Malfunction Cyl. 4 21, see Fuel Injection System Test

(Step 21.0)



P0205 Injector Circuit Malfunction Cyl. 5 22, see Fuel Injection System Test (Step 22.0)

P0206 Injector Circuit Malfunction Cyl. 6 23, see Fuel Injection System Test(Step 23.0)

P0207 Injector Circuit Malfunction Cyl. 7 24, see Fuel Injection System Test (Step 24.0)

P0208 Injector Circuit Malfunction Cyl. 8 25, see Fuel Injection System Test(Step 25.0)

P0300 Random Misfire Detected 13-21, see Ignition System Test (Steps 13.0-14.0) - Ignition System

Test (Step 21.0)1 & 2, see Fuel Injection System

Test (Steps 1.0-1.2) & Fuel Injection System Test (Steps 2.0-

2.2)Compression pressure

P0301 Cylinder 1 Misfire Detected 13, see Ignition System Test (Steps 13.0-14.0) ; 21, see Ignition System
















P0305 Cylinder 5 Misfire Detected 17, see Ignition System Test (Steps



16.0-17.0) ; 21, see Ignition System Test (Step 21.0)

1 & 2, see Fuel Injection System Test (Steps 1.0-1.2) & Fuel

Injection System Test (Steps 2.0-2.2)

Compression pressureP0306 Cylinder 6 Misfire Detected 18, see Ignition System Test (Steps












Compression pressureP0325 Right KS 1 Circuit Malfunction Wiring, connector, A16g1P0330 Left KS 2 Circuit Malfunction Wiring, connector, A16g2P0335 CKP Sensor Circuit Malfunction 11, see IGNITION SYSTEM TEST

(STEPS 11.0 & 11.1)P0341 CMP Sensor Circuit Range/Performance 12, see IGNITION SYSTEM TEST

(STEPS 12.0 & 12.1)P0370 Angle Deviation Between Camshaft &

CrankshaftCheck basic adjustment of camshaft

P0400 Exhaust Gas Recirculation Flow Malfunction

29, see Fuel Injection System Test (Step 29.0)

P0410 Air Injection System Malfunction Only USA

26-28, see FUEL INJECTION SYSTEM TEST (STEPS 26.0 &

27.0) & Fuel Injection System Test (Step 28.0)

P0422 TWC (Right) Efficiency Below Threshold Replace Right TWCP0432 TWC (Left) Efficiency Below Threshold Replace left TWCP0440 EVAP System Malfunction 32 & 33, see FUEL INJECTION




P0441 EVAP System Malfunction (Leak) - Logic Chain


31.0) ; 32, see FUEL INJECTION SYSTEM TEST (STEPS 32.0 &

33.0)P0442 EVAP System Leak Detected (Small Leak) 33, see FUEL INJECTION


P0443 EVAP System Purge Control Valve Circuit Malfunction


31.0)P0446 EVAP System Vent Control Malfunction

Only USAA. Activated charcoal canister shut-

off valve (Y58/4)

34 & 35, see Fuel Injection SystemTest (Steps 34.0-35.1)

B. End stage activated charcoal canister shut-off valve (Y58/4)

within N3/10N3/10

P0450 EVAP System Leak Detected (Large Leak)Only USA

A. Fuel tank pressure sensor (B4/3) electrical fault

35, see Fuel Injection System Test(Steps 34.0-35.1)

B. Fuel tank pressure sensor (B4/3) electrical fluctuations

Charcoal canister pluggedP0455 EVAP System Leak Detected (Large Leak)

Only USAEVAP system, large leak


33.0)Fuel tank pressure sensor (B4/3)

(voltage supply)35, see Fuel Injection System Test

(Steps 34.0-35.1)P0460 Fuel Level Sensor Circuit Low Input Fill fuel tankP0500 VSS Sensor Malfunction Test ASR/ESP. See TRACTION

CONTROL in BRAKESP0507 ISC RPM Higher Than Expected 1-3, see Electronic Accelerator

Test (Steps 1.0-2.0) & ELECTRONIC ACCELERATOR

TEST (STEPS 3.0 & 3.1)P0560 System Voltage Malfunction 1 & 2, see Fuel Injection System


2.2)



P0565 Cruise Control Switch 1, see CRUISE CONTROL TESTSP0600 Serial Communication Link Malfunction 36, see Fuel Injection System Test

(Steps 36.0-36.2)P0604 Internal Control Module Random Access

Memory (RAM) ErrorN3/10

P0605 Internal Control Module Read Only Memory (ROM) Error

N3/10

P0700 Transmission Control System Malfunction, Gear Unplausi, Transmission Leak,

Command Sleeve Stuck In Pressure Pos.

See appropriate AUTOMATICTRANSMISSION ELECTRONIC

CONTROLS article in TRANSMISSION SERVICE &

REPAIR for IMPORTED VEHICLES

P0702 Transmission Control System Electrical, Voltage Supply To Solenoid Valves




P0715 Input/Turbine Speed Sensor Circuit Malfunction, RPM Sensor Voltage Supply

& Function

See appropriate AUTOMATIC TRANSMISSION ELECTRONIC

CONTROLS article inTRANSMISSION SERVICE &


P0720 Output Speed Sensor Circuit Malfunction, CAN Fault Recognition




P0730 Incorrect Gear Ratio, Ratio Comparison Negative (Numerous)




P0740 Torque Converter Clutch Circuit Malfunction




P0743 Torque Converter Clutch Circuit Electrical See appropriate AUTOMATIC TRANSMISSION ELECTRONIC


REPAIR for IMPORTEDVEHICLES



P0748 Pressure Control Solenoid Electrical, Pressure Control Valve Modulation Press.,

Pressure Control Valve Shift Pressure



REPAIR for IMPORTEDVEHICLES

P0753 Shift Solenoid A Electrical, 1-2/4-5 Solenoid Shift Valve




P0758 Shift Solenoid B Electrical, 2-3 Solenoid Shift Valve




P0763 Shift Solenoid C Electrical See appropriate AUTOMATIC TRANSMISSION ELECTRONIC



P0801 Engine/Climate Control Electric Cooling Fan Malfunction

38, see Fuel Injection System Test(Steps 38.0-40.0)

P0802 Resonance Intake Manifold Switchover Valve Malfunction


31.0)P0809 Angle Deviation Between Camshaft &

CrankshaftCheck basic adjustment of camshaft

P0811 CAN From Electronic Ignition Lock 36, see Fuel Injection System Test(Steps 36.0-36.2)

P1031 O2 Sensor (G3/3, G3/4) Reversed Check proper connection of O2 sensors in ETM

P1177 Oil Sensor (level, temperature, quality) (B40) Oil temperature implausible


31.1)P1178 Oil Sensor (level, temperature, quality)

(B40) Oil level implausible37, see FUEL INJECTION


P1179 Oil Sensor (level, temperature, quality) (B40) Oil quality implausible


31.1)P1180 Oil Sensor (level, temperature, quality)

(B40) Oil temperature too high37, see FUEL INJECTION


P1181 Engine/Climate Control Electric Cooling 38, see Fuel Injection System Test



Fan (Steps 38.0-40.0)P1185 Oil Sensor (level, temperature, quality)

(B40) water in oil37, see FUEL INJECTION


P1186 Fuel Safety Shut Off Recognized 3 & 4, see ELECTRONIC ACCELERATOR TEST (STEPS

3.0 & 3.1) & ELECTRONIC ACCELERATOR TEST (STEPS

4.0 & 5.0)P1225 Resonance Intake Manifold Switchover

Valve Malfunction30, see FUEL INJECTION


P1233 EA/CC/ISC Actuator (M16/6) Icing Problem

Actuator

P1386 Knock Sensor Control From ECM (N3/10) At End Stop

Increased knock tendency due to bad fuel, carbon in combustion chamber

or mechanical damageP1400 EGR Valve Vacuum Transducer 29, see Fuel Injection System Test

(Step 29.0)P1420 AIR Pump Switchover Valve



P1453 AIR Relay Module, AIR Pump Only USA


27.0)P1491 Refrigerant pressure in A/C system too

highCheck automatic A/C system

P1542 Pedal Value Sensor 1 & 2, see Electronic Accelerator Test (Steps 1.0-2.0)

P1570 CAN Signal From DAS Control Module To Engine Control Module

A. Start attempted with "locked" DAS

User ErrorB. CAN signal from DAS control module (N54/1) to engine control

module (N3/10) interruptedCheck operation of DAS

C. Engine control module (ME-SFI)and DAS control module are not

compatibleStep 36, see Fuel Injection System

Test (Steps 36.0-36.2) , check control modules and part no.

P1580 EA/CC/ISC Actuator (M16/1) 3 & 4, see ELECTRONIC ACCELERATOR TEST (STEPS

3.0 & 3.1) & ELECTRONIC ACCELERATOR TEST (STEPS

4.0 & 5.0)P1584 Stop Lamp Switch Test ETS/ASR. See TRACTION



CONTROL in BRAKESP1603 CAN From EIS 36, see Fuel Injection System Test

(Steps 36.0-36.2)P1605 - Test ETS/ASR. See TRACTION

CONTROL in BRAKESP1642 Engine Control Module Check engine control module for

correct version codeP1644 Transmission version cannot be checked

due to low voltage of transmission control module (N15/3)




P1681 Crash Signal Unplausible 40, see Fuel Injection System Test (Steps 38.0-40.0)

P1747 CAN Signal From ETC A. CAN failure: Transmission protection malfunction from

transmission control module (N15/3)See appropriate AUTOMATIC

TRANSMISSION ELECTRONICCONTROLS article in

TRANSMISSION SERVICE & REPAIR for IMPORTED

VEHICLESB. CAN failure: Instrument cluster

Test instrument cluster (A1)P0520 Cylinder Shutoff Oil Pressure Sensor

Fault Code DescriptionSee DTC P0520 Test

P1183 Cylinder Shutoff Valve For Right Bank Of Cylinders (Y80), Fault Code Description

See DTC P1183 & P1184 Test

P1184 Cylinder Shutoff Valve For Left Bank Of Cylinders (Y81), Fault Code Description


P1355 Cylinder Shutoff Valve For Right Bank Of Cylinders (Y80), Fault Code Description


P1356 Cylinder Shutoff Valve For Left Bank Of Cylinders (Y81), Fault Code Description


P1357 Cylinder Shutoff ON: No. 2, 3, 5 Or 8 Cylinder Inlet Valve Still Being Activated,

Fault Code Description

See DTC P1357, P1358, P1359, P1360 & P1361 Test

P1358 Cylinder Shutoff OFF: No. 5 Cylinder Outlet Valve Not Being Activated, Fault

Code Description

See DTC P1357, P1358, P1359,P1360 & P1361 Test


Code Description



Code Description




SEATS, BUNKS, RESTRAINT SYSTEMS DTCS


THROTTLE CONTROL, SPEED CONTROL SYSTEMS DTCS


© 2008 Mitchell Repair Information Co., LLC.


Code Description


P1366 Exhaust Valve Changeover Valve, Fault Code Description

See DTC P1366 Test

P1380 A Cylinder Inlet Valve Is Not Being Activated With Cylinder Shutoff OFF,

Fault Code Description

See DTC P1380 Test

P1666 Cylinder Shutoff Valve Opens With Cylinder Shutoff ON, Fault Code

Description

See DTC P1666 Test

DTC TEST/REMEDYB9183 SRS indicator lamp comes on and fault code stored in restraint

systems control unitB91A3 SRS indicator lamp comes on and fault code stored in restraint

systems control unitB1310 Fault codes are stored in airbag control unitB1311 Fault codes are stored in airbag control unitB1867 Fault codes are stored in airbag control unitB1871 Fault codes are stored in airbag control unit

DTC TEST/REMEDYP2032 Engine in limp-home mode and engine diagnosis indicator lamp is on

and/or faults code is stored in motor electronics control unitP202E Engine in limp-home mode and engine diagnosis indicator lamp is on

and/or faults code is stored in motor electronics control unitP208E Engine in limp-home mode and engine diagnosis indicator lamp is on

and/or faults code is stored in motor electronics control unitP208F Engine in limp-home mode and engine diagnosis indicator lamp is on

and/or faults code is stored in motor electronics control unitC1000 DTC in multifunction display



Fault Codes

Documents

driver ab

p1184 test

p1356 test

brake light

electronic

electronic

signal speed

ignition system