ESI eCatalog

CATALOG

The

ESI

Cho

ice

Equipment Synergy International Equipment Synergy International















PLATE COMPACTOR - EVC40H

www.theESIchoice.com

EVC40HQuality cast iron base plate for long life and dependable service. Ideal to operate in tight areas to maneuver around obstructions such as pipes and for use in foundations.

Technical DataDESCRIPTION EVC40HDimension (LxWxH) in (mm) 21.9 x 12.2 x 40.4

(558 x 310 x 1,028)Operating Weight lbs (kg) 106 (48)Plate Size (LxW) in (mm) 17.4 x 11.8 (420 x 300)Working Speed mph (km/h) 0.62 - 0.81 (1-13)Vibration Frequency v.p.m. (Hz) 5,220 (87)Centrifugal Force lbs (kg) 1461 (665)Compacted Area ft²/h (m²/h) 3,229 - 3,875 (300 - 360)Max. Gradeability - ° 20Engine HONDA GX100Engine Type 4 - Stroke GasolineMax. Power Output kW (Hp) GX100 @ 1.5 (2)

Anti-vibration handle with padded grip protects the top and sides of the engine and provides the operator comfort with the replaceable padded handle.

Honda GX100, a proven, dependable power source

Attached swing‐away wheel kit, the ultimate in convenience for jobsite transportation

External drain for the engine oil simplifies servicing by allowing a clean and easy way to drain engine oil

Lifting handles located on the base plate for easy loading and unloading

Wraparound steel engine protection with integral lifting bale, gives the engine the protection it needs and offers a secure lifting point for transportation.

Heavy duty long lasting cast steel base plate long-life smooth base plate for a quality finish

Throttle assembly is a heavy-duty rack and pinion design made out of cast aluminum, no stamped metal parts to bend on you while you operate the throttle.

ESI101 Gannaway Drive, Suite # 3P.O. Box 997Jamestown, North Carolina 27282Phone: 866.648.7101Fax: 336.310.1177Email: [email protected]

IEEQUIPMENT SYNERGY INTERNATIONAL
















PLATE COMPACTOR - EVC60H


EVC60HMedium-class vibratory plate for easy portability and one-man operation. Handle many of your applications from paving stones to patios and sidewalk sub-base.

Technical DataDESCRIPTION EVC60HDimension (LxWxH) in (mm) 30.0 x 14.2 x 39.8

(761 x 360 x 1,007)Operating Weight lbs (kg) 136 (62)Plate Size (LxW) in (mm) 20 x 14.2 (510 x 360)Working Speed mph (km/h) 0.75 - 0.93 (1.2 - 1.5)Vibration Frequency v.p.m. (Hz) 5,220 (87)Centrifugal Force lbs (kg) 1,978 (897)Compacted Area ft²/h (m²/h) 5,920 - 6,459 (550 - 600)Max. Gradeability - ° 20Engine HONDA GX120Engine Type 4 - Stroke GasolineMax. Power Output kW (Hp) GX120 @ 2.6 (3.5)


























PLATE COMPACTOR - EVC70WH


EVC70WHThe everyday machine to cover all your bases. Select the 70H to throw on your truck for footings, sub-base, paving stones, and most of your asphalt compaction needs.

Technical DataDESCRIPTION EVC70WHDimension (LxWxH) in (mm) 29.3 x 16.5 x 43.3

(745 x 420 x 1,099)Operating Weight lbs (kg) 161 (73)Plate Size (LxW) in (mm) 20.4 x 16.5 (520 x 420)Working Speed mph (km/h) 0.75 - 0.87 (1.2 - 1.4)Vibration Frequency v.p.m. (Hz) 5,220 (87)Centrifugal Force lbs (kg) 2,630 (1.193)Compacted Area ft²/h (m²/h) 6,243 - 6,997 (580 - 650)Max. Gradeability - ° 20Engine HONDA GX160Engine Type 4 - Stroke GasolineMax. Power Output kW (Hp) GX160 @ 3.6 (4.8)







Large capacity water tank to use with asphalt compaction applications




















PLATE COMPACTOR - EVC90WH


EVC90WHThis is the classic size for most of your everyday vibratory plate applications. Hard hitting for all of your granular soil and asphalt jobs in applications such as paving edging, retaining walls, driveways, and those municipal paving stone jobs.







Large capacity water tank to use with asphalt compaction applications



ESI101 Gannaway Drive , Suite # 3P.O. Box 997Jamestown, North Carolina 27282Phone: 866.648.7101Fax: 336.310.1177Email: [email protected]


Technical DataDESCRIPTION EVC90WHDimension (LxWxH) in (mm) 32.1 x 19.6 x 40.2

(819 x 500 x 1,022)Operating Weight lbs (kg) 209 (95)Plate Size (LxW) in (mm) 23.1 x 18.9 (590 x 480)Working Speed mph (km/h) 0.75 - 0.93 (1.2 -1.5)Vibration Frequency v.p.m. (Hz) 5,220 (87)Centrifugal Force lbs (kg) 3,439 (1,560)Compacted Area ft²/h (m²/h) 6,674 - 7,535 (620 – 700)Max. Gradeability - ° 20Engine HONDA GX160Engine Type 4 - Stroke GasolineMax. Power Output kW (Hp) GX160 @ 3.6 (4.8)
















RAMMER - ETR50H


ETR50HCompact & lightweight yet a proven performer. Use in tight areas and for narrow trench compaction applications

Technical DataMODEL ETR50HDIMENSION (LxWxH) - in (mm) 28.8 x 15.3 x 40.1

(733 x 390 x 1,022)OPERATING WEIGHT - lbs (kg) 121 (55)SHOE SIZE (LxW) - in (mm) 13.1 x 10.8 (333 x 275)STROKE - in (mm) 2.8 (70)IMPACT FORCE - lb (kg) 2,205 (1,000)BLOWS PER MINUTE 600 - 650TRAVEL SPEED - ft/min (m/min) 32.8 - 42.7 (10 - 13)COMPACTED AREA - ft²/h (m²/h) 2,799 (260)FUEL TANK CAPACITY - gal (ltr) 0.8 (3)ENGINE HONDA GX100ENGINE TYPE 4-STROKE GASOLINEMAX. POWER OUTPUT - kW (hp) GX100 @ 2.1 (2.8)

Fully welded all steel handle protects the top and sides of the engine. The padded replaceable grip provides the operator with an added level of comfort and vibration isolation.

Handle rollers help with loading and unloading, made of a heavy duty solid composite, and not prone to flexing or breaking

Lower engine guard protects both the crank-case and engine recoil in instances when rammers are thrown in the bed of a truck and buried under loose gear.


Fuel system heavy duty poly tank with leak proof vented cap, and triple fuel filtration to guard against fuel contamination and engine breakdowns

Rammer foot is made of laminated wood to reduce operator shock, with a thick metal bottom for long lasting wear. One of the most durable rammer shoes in the industry

Lower leg sight glass allows the operator to check the oil at a glance. Maintenance and service time is greatly reduced


















RAMMER - ETR70RF


ETR70RFHigh stroke and maximum blows per minute, produce an impressive impact force. The prov-en mid size rammer for most of your everyday applications



Technical DataMODEL ETR70RFDIMENSION (LxWxH) - in (mm) 30.3 x 16.1 x 42.0

(770 x 410 x 1,067)OPERATING WEIGHT - lbs (kg) 172 (78)SHOE SIZE (LxW) - in (mm) 15.8 x 13.5 (335 x 285)STROKE - in (mm) 80 (3.1)IMPACT FORCE - lb (kg) 3,527 (1,600)BLOWS PER MINUTE 630 - 680TRAVEL SPEED - ft/min (m/min) 29.5 - 39.4 (9 - 12)COMPACTED AREA - ft²/h (m²/h) 3,229 (300)FUEL TANK CAPACITY - gal (ltr) 3.0 (0.8)ENGINE ROBIN EH12-2DENGINE TYPE 4-STROKE GASOLINEMAX. POWER OUTPUT - kW (hp) EH12-2D @ 2.9 (4.0)



Lower engine guard protects both the crankase and engine recoil in instances when rammers are thrown in the bed of a truck and buried under loose gear.





A rugged and durable float carburetor to provide for dependable operation of your rammer’s engine, easy and efficient to maintain.
















RAMMER - ETR85D


ETR85DHigh stroke and maximum blows per minute, produce an impressive impact force, coupled with a proven Hatz diesel engine. The heavyweight for those larger applications, and contrac-tors that prefer diesel only

Technical DataMODEL ETR85DDIMENSION (LxWxH) - in (mm) 30.3 x 16.1 x 42.8

(771 x 409 x 1,086)OPERATING WEIGHT - lbs (kg) 192 (87)SHOE SIZE (LxW) - in (mm) 13.1 x 11.2 (335 x 285)STROKE - in (mm) 3.2 (82)IMPACT FORCE - lb (kg) 3,968 (1,800)BLOWS PER MINUTE 650 - 700TRAVEL SPEED - ft/min (m/min) 26.2 - 36.1 (8 - 11)COMPACTED AREA - ft²/h (m²/h) 3,337 (310)FUEL TANK CAPACITY - gal (ltr) 0.8 (3)ENGINE HATZ 1B20ENGINE TYPE 4-STROKE DIESELMAX. POWER OUTPUT - kW (hp) 3.1 (4.2)



Lower engine guard protects both the crank-case and engine recoil in instances when rammers are thrown in the bed of a truck and buried under loose gear.





Hatz 1B20 4-stroke diesel engine , perfect for jobs where spark or fuel is an issue


















ETR50 Awww.theESIchoice.com

ETR50ALooking for an alternative power source to operate your rammers? ESI provides the solution with our air motor-powered rammers. Perfect for those applications where a spark-operated motor is not desirable and it provides a clean low-maintenance version of one of a construction site’s staple pieces of equipment. Requiring only 60 CFM of air the ETR50A can operate easily off of your job site air compressor.Examples of applications where an air-powered rammer would be desirable:• Insideofbuildingswhereengineexhaustwillbeaproblem• Downindeeptrencheswhereengineexhaustcanaccumulate• Useinoilrefinerieswherespark-operatedequipmentmaynotbedesirable• Useinplaceofanelectricrammerandnotworryaboutelectriccablelengthorvoltagelineloss–and much safer!Toservicebetweenusesrequiresonlyaquickwashandcheckingoftherammerbottomoilreservoir–that’sit!Noenginetoservicewhichalsoeliminatesmanyofyourtypicalrammerserviceissues.

TechnicalDataMODEL ETR50A ETR70A ETR85ADIMENSION(LxWxH)-in(mm) 28.8x15.3x40.1 30.3x16.1x42.0 30.3x16.1x42.8

(733x390x1,022) (770x410x1,067) (771x409x1,086)OPERATINGWEIGHT-lbs(kg) 121(55) 172(78) 192(87)SHOESIZE(LxW)-in(mm) 13.1x10.8(333x275) 15.8x13.5(335x285) 13.1x11.2(335x285)STROKE-in(mm) 2.8(70) 80(3.1) 3.2(82)IMPACTFORCE-lb(kg) 2,205(1,000) 3,527(1,600) 3,968(1,800)BLOWSPERMINUTE 600-650 630-680 650-700TRAVELSPEED-ft/min(m/min) 32.8-42.7(10-13) 29.5-39.4(9-12) 26.2-36.1(8-11)COMPACTEDAREA-ft²/h(m²/h) 2,799(260) 3,229(300) 3,337(310)POWERTYPE AIR AIR AIRAIRCONSUMPTION 60CFM 80CFM 80CFM



Lowerlegsightglassallowstheoperatortochecktheoilataglance.Maintenance and servicetimeisgreatlyreduced

Handlerollershelpwithloadingandun-loading,madeofaheavydutysolidcomposite,andnotpronetoflexingorbreaking

Rammer foot is made of laminated wood to reduce operatorshock,withathickmetalbottomforlonglastingwear.Oneofthemostdurablerammershoesintheindustry.
















CENTRIFUGAL PUMPS


CENTRIFUGAL PUMPSDependable Pumps you can count on in a variety of applications. Ideal for general purpose dewatering, irrigation, spraying, washdowns, and agricultural applications. These pumps offers economy, portability, and performance all in one neat package.

ECP-2H2” thermoplastic (polypropylene) pump casing will allow for many additional applications in addition to standard dewatering. Use with most insecticides and fertilizers where aluminum may not work. 1/2” spherical solids handling capability. Very portable at only 45 pounds weight!

EHP-2HA 2” high-pressure single stage centrifugal pump will give you many opportunities to use in any different applications. The discharge port will rotate 90˚ to allow use in different configurations. Dependable Honda engine and die-cast aluminum pump housing with cleanout cover tool. Provide for your personal home defense in areas prone to wildfires or use in high-head applications.

Technical DataMODEL ECP-2H EHP-2HSuction x Discharge in. (mm) 2x2 (51x51) 2x2 (51x51)Max Capacity GPM (l) 140 (532) 130 (494)Max Head ft. (m) 108 (33.6) 250 (78)Max Pressure psi (kPa) 46.7 (313) 108 (724)Max Solids in. (mm) .5 (12) .2 (5)Max Lift ft. (m) 20 (6.2) 25 (7.6)Engine Brand and Model Honda GX-160 Honda GX-160Operating HP (kW) 4.8 (3.6) 4.8 (3.6)Operating RPM 3600 3600Running Time minutes 100 100Low Oil Shutdown Standard StandardStarting Method Recoil RecoilDimensions LxWxH in. (mm) 20x17x17 (508x432x432) 24.0x19.5x19.9 (610x495x505)Dry Weight lbs. (kg) 45 (20) 84 (38)


















TRASH PUMPS


TRASH PUMPSDependable Trash Pumps you can count on in the toughest applications with flow efficiency and solids handling capability. These pumps are constructed of either die cast or sand cast housings with volute and impellers of cast iron for long life. Solid, basic, dependable machines that will perform to your expectations. Other features include Viton© mechanical seals and electric start/wheel kit options (depending on model).

ETP-2HCompact & lightweight with great performance in a small package. Die cast aluminum pump casing with cast iron volute and impeller. Dependable Honda engine and comes standard with metal strainer and cleanout cover tool. Silicone/Viton© mechanical seal for long-life. Use for those 1-man trash dewatering applications. 1” spherical solids handling capability.

ETP-3HDie cast aluminum pump casing with cast iron volute and impeller to help resist abrasion. Dependable Honda engine and comes standard with metal strainer and cleanout cover tool. Silicone/Viton© mechanical seal for long-life. Use for those applications where you need to move a little more water. 1.5” spherical solids handling capability in an economical package.

ETP-3XHHeavy-duty extra thick sand cast pump casing for tough condition applications along with the standard cast iron impeller and volute. Simple cleanout design permits easy removal of trash and debris without disconnecting hoses. Full wraparound pump frame is standard.

TRASH PUMPSETP-4HEThis is a heavy-duty 4” trash pump with full 2” solids handling capacity, use in those applications where you need a strong dependable pump. Fully featured with electric-start standard and 16” pneumaic tires (on steel wheels) as part of the standard wheel kit. Extra thick sand cast pump housing and cast iron volute and impeller for long life in abrasive pumping applications. Also standard is an upgraded Viton©/Silicone mechanical seal.

ETP-6DTWhen you need to move a lot of water fast and efficiently then select ESI’s 6” Trash Pump. This model offers standard features not found on similarly priced units:• Stainless steel impeller (resistant to abrasion)• Stainless steel fuel tank (no more rust problems with steel tanks and no more heat or warping problems with plastic tanks)• Unique Slide Mechanism permits complete service of the pump housing without removal of the hoses or lifting off of the pump casings (Patent Pending)

Dependable Daihatsu/Vanguard water-cooler diesel engine equipped with a digital tachometer/hourmeter and metal suction strainer. Silicone/Viton© mechanical seal for long-life. The 6DT has a full 3” spherical solids handling capability. The trailer is D.O.T. approved. Also available as a skid-mount - model number ETP-6DS

TRASH PUMPS

ETP-2H ETP-3H ETP-3XH ETP-4HE ETP-6DS ETP-6DTSuction x Discharge in. (mm) 2x2 (51x51) 3x3 (76x76) 3x3 (76x76) 4x4 (101x101) 6X6 (152x152) 6X6 (152x152)

Max Capacity GPM (l) 200 (760) 300 (1140) 340 (1292) 500 (1900) 1000 (3800) 1000 (3800)

Max Head ft. (m) 98 (31) 105 (33) 100 (31) 100 (31) 95 (30) 95 (30)

Max Pressure psi (kPa) 42.4 (293) 45.5 (305) 43.3 (291) 43.3 (291) 41.1 (276) 41.1 (276)

Max Solids in. (mm) 1 (25) 1.5 (37) 1.5 (37) 2.0 (50) 3.0 (76) 3.0 (76)

Max Lift ft. (m) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6)

Engine Brand and Model Honda GX-160 Honda GX-160 Honda GX-270 Honda GX-390 Daihatsu 3/LC Daihatsu 3/LC

Operating HP (kW) 4.8 (3.6) 4.8 (3.6) 7.1 (5.3) 11.1 (8.3) 26.5 (19.8) 26.5 (19.8)

Operating RPM 3600 3600 3600 3600 3200 3200

Running Time Minutes (Hours) 100 100 100 80 9 (hours) 9 (hours)

Low Oil Shutdown Standard Standard Standard Standard Standard Standard

Starting Method Recoil Recoil Recoil Electric/Recoil * Electric * Electric *

Optional Wheel Kit ESIC402-90 ESIC402-90 ESIA734-90 (10” wheels)

ESIA735-90 (16” wheels)

standard N/A N/A

Dimensions LxWxH in. (mm) 24.0x19.5x19.9x (610x495x505)

24.0x19.5x19.9x (610x495x505)

21.3x14.3x18.0 (540x360x450)

44.5x37.5x36.3 (1130x953x922)

71 x 28 x 41 (1803x711x1041)

99.0x48.0x60.0 (252x122x152)

cm

Dry Weight lbs. (kg) 86 (39) 95 (43) 158 (72) 280 (127) 850 (386) 1125 (510)


















DIAPHRAGM PUMPS


DIAPHRAGM PUMPSDependable Pumps you can count on in a variety of applications. Ideal for general purpose dewatering, and agricultural applications. These pumps offers economy, portability, and performance all in one neat package.

EDP-3HDiaphragm pumps are a “positive displacement” pump and can run continuously with no water running through the pump without damage. This is perfect when you have seepage or low flow applications. They also have the ability to handle heavier liquids that can flow such as mud, slurry, and sewage. Wheels are standard along with iron nipples and metal suction strainer. The base can be rotated 90˚. Also available in electric or diesel.

Technical DataMODEL EDP-3HSuction x Discharge in. (mm) 3x3 (76x76)Max Capacity GPM (l) 90 (342)Max Head ft. (m) 50 (15.6)Max Pressure psi (kPa) N/AMax Solids in. (mm) 1.5 (37)Max Lift ft. (m) 25 (7.6)Engine Brand and Model Honda GX-120Operating HP (kW) 3.5 (2.6)Operating RPM 3600Running Time minutes 80Low Oil Shutdown StandardStarting Method RecoilDimensions LxWxH in. (mm) 42.0x30.0x22.0 (1066x762x559)Dry Weight lbs. (kg) 170 (77)


















SUBMERSIBLE PUMPS


SUBMERSIBLE PUMPSDependable Submersible Pumps you can count on in the toughest applications. Use a submersible pump when you have high suction lift requirements that are beyond what engine-driven pumps can do [over 25 feet depth (8 meters)]. Submersibles are designed to be lowered into the water and will push up the water (instead of drawing or sucking up the water) with the liquid being brought into the unit at the very bottom of the pump. These units offer many standard features and have float switches and control boxes available for truly automatic operation.

ESP-1522A larger and more powerful version of the ESP-1014 with a 1½” discharge. Designed with a ½ HP motor to move larger volumes of water and for greater depths (maximum head of 47 feet). Standard features include an attached float switch , thermal overload protection and suction screen with 12 foot of power cord.

ESP-2040 & ESP-2052These are ESI’s heavy duty stainless-steel cased 2” discharge submersible pumps. 304 stainless-steel is used for the casing, motor housing, shaft, and hardware to provide for corrosion resistance and long life. Cast iron impeller, top, and pump end. Light-weight and slim design will fit easily in dewatering 8” pump pipes. UL/CSA approved with built-in thermal overload protection. Longer power cables are used with 30 foot on the 2040 and 50 foot on the 2052.

At the heart of the pump is its best feature, a dual mechanical seal that features a Silicon-carbide/Viton© lower seal and an upper seal of Carbon-Ceramic/Viton©. A dual seal will provide extra protection for the motor in avoiding damaging water leaks.

The ESP-2040 is a 1/2HP unit equipped with a 30 foot long power cable.

The ESP-2052 is a 1 HP unit equipped with a 50 foot long power cable.

SUBMERSIBLE PUMPSESP-2032T & ESP-3042TExtra heavy-duty shredder-trash submersible pumps to use in those really tough applications. These feature a carbide-tipped impeller and a spiral shredder mechanism surface plate is hardened for superior cutting ability. Built for durability with a cast iron housing and a stainless-steel motor housing. UL/CSA approved and thermal overload protection for the motor. A triplex seal system is used that consists of a double mechanical seal and a third shaft seal.

Use in applications to prevent clogging and reduce maintenance when cut-ting through stringy and fibrous material. Applications include septic tanks, sewage treatment plants, sewage pumping stations, dirty water drainage, flood and emergency use. The motors are rated for continuous duty use.

If you want a long-life trash submersible pump for continuous duty then ESI has the unist for you.

The ESP-2032T is a 1HP, 2” discharge unit equipped with a 18 foot long power cable.

The ESP-3042T is a 2 HP, 3” discharge unit equipped with a 32 foot long power cable (no plug).

Larger sizes and voltage options are available on request

SUBMERSIBLE PUMPS



Technical DataMODEL ESP-1522 ESP-2040 ESP-2052 ESP-2032T ESP-3042TDischarge in. (mm) 1.5 (37) 2 (51) 2 (51) 2 (51) 3 (76)

HP (kW) 1/2 (.37) 1/2 (.37) 1 (.75) 1 (.75) 2 (1.5)

Voltage 115AC 1Ø 115AC 1Ø 115AC 1Ø 115AC 1Ø 230AC 1Ø

Full Load Amps 4.9 5.4 9.3 13.5 12

Starting Amps 24.5 27 46.5 67.5 60

Max Capacity GPM (l) 48 (182) 65 (247) 95 (361) 120 (456) 190 (722)

Max Head ft. (m) 22 (6.8) 40 (12.5) 52 (16.2) 32 (10) 42 (13)

Operating RPM 3450 3450 3450 3450 3450

Thermal Protection Yes Yes Yes Yes Yes

Float Switch Yes Optional 30’ #ESI55-930

Optional 50’ #ESI55-950

Optional 30’ #ESI55-930

Optional with control box

UL/CSA Yes Yes Yes Yes Yes

Dimensions WxH in. (mm) 9.4 x 12.6 (239 x 320)

6.7 x 14.5 (170 x 368)

7.6 x 17.1 (193 x 434)

11.5 x 18.5 (292 x 467)

14 x 21.7 (356 x 551)

Dry Weight lbs. (kg) 14 (6.3) 29 (13.1) 48 (21.8) 48 (21.8) 80 (36.3)
















GENERATORS


GENERATORSDependable Generators you can count on in the toughest conditions. These generators are perfect for the job site and remote applications with their rugged dependability, long running times, and their clean electrical output. Solid, basic, dependable machines that will perform to your expectations. ESI has taken a “back to the basics” approach with a generator that is simply designed but built to take the rough handling of a construction job site and equipment rental use. All models feature copper windings and brushless design with capacitor.

EA30-HGFICompact & lightweight with great performance in an economical small package. If you need the very basics in a generator then the A30H is your model. Dependable Honda engine and comes standard with GFI outlets and circuit break-er. Great for those 1-man jobs. 1-year generator warranty.

ELR-30HRugged contractor designed for all-day every-day operation. Dependable Honda engine and comes with many standard features such as a service-minder hour meter. Large fuel capacity allows for 8.6 hours of run time (full load). 2-year standard generator warranty.

ELR-55HOne of the most common and needed machines on a job site this 5.5 kW unit may be one of the most popular sizes. Durable Honda engine with a full shift run time of 8.3 hours (at full load). Full wraparound 1” diameter pipe frame is standard. 2-year standard generator warranty.

GENERATORSELR-70EHIWhen you need extra power to run the brick and hardscape saws then the 70EHI will fill the bill with 7kW maximum power and a continuous rating of 6.5kW. Economical Honda engine (electric start standard) with a run time of 10.3 hours (at full load). 120/240 volt with full outlet package. 2-year standard generator warranty.

ELR-105EINeed to run multiple tools on a job site off of distribution boxes? The 105EI with its truly portable 10kW max output will give you what you need. A rugged Vanguard twin-cylinder 18 HP engine with give you a run time of 6 hours (at full load) on only 8 gallons of fuel. 10kW in a generator that weighs only 234 lbs! 2-year standard generator warranty.

ELR-180VThis is a lot of power in a portable package, less than 500 lbs. This is power usually found only in much larger expensive trailer-mounted diesel gensets. Dependable Vanguard 31HP electric-start engine (no battery supplied) and with a 240 volt 60 amp outlet for those larger items. The ELR180V is equipped with a main circuit breaker plus individual breakers for each outlet. 2-year generator-end warranty.

GENERATORSTechnical Data MODEL EA30-HGFI ELR-30H ELR-55H ELR-70EHI ELR-105EI ELR-180VMAXIMUM WATTS 3000 3000 5500 7000 10000 18000RATED WATTS 2400 2400 4500 6500 9500 15000VOLTAGE 120 120 120/240 120/240 120/240 120/240AMPERAGE 20 20 37.5/18.8 54.2/27.1 79.2/39.6 125/62.5RPM 3600 3600 3600 3600 3600 3600HERTZ/PHASE 60/1 60/1 60/1 60/1 60/1 60/1RECEPTACLES A,B A,B 2B,C,D 2B,C,E 2B,C,E,F 3B,C,E,GFULL POWER SWITCH N/A N/A STD N/A N/A N/ACIRCUIT BREAKERS N/A STD STD STD STD STDVOLT METER N/A STD STD STD STD STDHOUR METER N/A STD STD STD STD STDEASY IDLER N/A STD STD STD STD N/AFUEL IN GALLONS 1 3 5 8 8 18RUN TIME 1/2 LOAD HRS 3 9 10.8 13.4 9 11.5RUN TIME FULL LOAD 2.8 8.6 8.3 10.3 6 7.2ENGINE MODEL H-GX160 H-GX160 H-GX270 H-GX390 V-35400 V-543477HP/CC 4.8/160 4.8/160 8/270 11/389 18/570 31/895RECOIL STD STD STD STD STD N/AELECTRIC START N/A N/A N/A STD STD STDSOLID STATE IGNITION STD STD STD STD STD STDC.I.CYLINER LINER STD STD STD STD STD STDLOW TONE MUFFLR STD STD STD STD STD STDLOW OIL SHUT DOWN STD STD STD STD STD STDDBA 7M AVERAGE 73 73 74 76 76.5 84WELDED FRAME 1" STD STD STD STD STD STDNET DIMENSION L 23.5 23.5 28 30 30 41.5NET DIMENSION W 17.5 17.5 22 24 24 32NET DIMENSION H 20.5 20.5 25 25 25 35PACKED DIM L 24 24 28.5 31 31 42.5PACKED DIM W 18 18 22.5 25 25 33PACKED DIM H 21 21 25.5 26 26 36WEIGHT NET LBS 78 88 165 213 234 478WEIGHT PACKED LBS 88 96 179 227 245 518LIFTING KIT N/A N/A N/A OPT OPT STD


















DIESEL GENERATORS


DIESEL GENERATORSDependable Diesel Generators that you can count on in the toughest conditions. If you are restricted in use of gasoline engines and you need reliable and clean power then ESI has the diesel-powered generator required. Available in 2 sizes ESI has taken a “back to the basics” approach with a diesel generator that is simplydesigned but built to take the rough handling of a construction job site and equipment rental use. Both models feature full copper windings and 2-year generator warranty.

ELR-60ELIf you are restricted in use of gasoline engines and you need reliable and clean power then ESI has the diesel-powered generator required. Get true fuel economy with 10 hours of run time (full load) on only 5 gallons of diesel with the Kohler/Lombardini engine. A optional muffler scrubber is available for underground use such as mines. 2-year standard generator warranty.

ELR-130ELIf you need more power in a portable diesel-powered generator then ESI has that also. Great fuel economy that gives you a full shift (8 hours) of run time (at full load) on only 8 gallons of diesel with a 19HP Kohler/Lombardini engine with electric-start (battery not included). The ELR130EL is also equipped with a CS6369 50 amp “California Plug” to use with distribution boxes commonly found on job sites. An optional muffler scrubber is available for underground use such as mines. 2-year standard generator warranty

Technical DataMODEL ELR-60EL ELR-130EL MODEL ELR-60EL ELR-130EL MODEL ELR-60EL ELR-130ELMAXIMUM WATTS 6000 13000 RUN TIME 1/2 LOAD HRS 14 9.6 NET DIMENSION W 22 26RATED WATTS 5500 12000 RUN TIME FULL LOAD 10.5 8 NET DIMENSION H 25 29.5VOLTAGE 120/240 120/240 ENGINE MODEL 15LD 25LD PACKED DIM L 28.5 42AMPERAGE 45.8/22.9 100/50 HP/CC 10/400 19/654 PACKED DIM W 22.5 40RPM 12 RECOIL STD N/A PACKED DIM H 25.5 34.5HERTZ/PHASE 60/1 60/1 ELECTRIC START STD STD WEIGHT NET LBS 187 380RECEPTACLES 2A,B,C 2A,B,D, E SOLID STATE IGNITION -- STD WEIGHT PACKED LBS 201 420FULL POWER SWITCH STD N/A C.I.CYLINER LINER STD STD LIFTING KIT OPT STDCIRCUIT BREAKERS STD STD LOW TONE MUFFLR -- - GLOW PLUG KIT VOLT METER STD STD LOW OIL SHUT DOWN STD - GOOD TO –30° F OPT STDHOUR METER STD STD DBA 7M AVERAGE 77 81 LOAD CELL KIT OPT OPTEASY IDLER -- - WELDED FRAME 1" STD STD FUEL /WATER SEPARATOR OPT OPTFUEL IN GALLONS 5 8 NET DIMENSION L 28 39 MUFFLER SCRUBBER OPT 420



















EDGER CONCRETE TROWELS

EDGER CONCRETE TROWELSDependable Concrete Trowels that you can count on in the toughest conditions. After you float and finish the floor you can then eliminate the laborious hand finishing required along the walls and around any columns. Available in 2 sizes ESI has taken a “back to the basics” approach with an edger that is simply designed but built to take the rough handling of a construction job site and equipment rental use. Both models feature heavy-duty gearboxes and rotating rings that allow the edger to glide smoothly along the wall.

EET-60H

24” (600mm) blade width that works right up against the wall. Use this model for small dimension floors, a perfect companion model to a 36” twin ride-on trowel. A convenient folding handle makes it easier to transport in smaller vehicles and saves space for storage.

EET-75HFor working on those larger projects, use as your 30” (750mm) diameter edger trowel on your larger floors. A rotating guard ring allows you to finish right up against the wall and will give you the smooth finish you require. A convenient folding handle makes it easier to transport in smaller vehicles and saves space for storage.

Features & BeneFits:

rotating ring gear Box sight gauge

Folded handle For transportation hd CentriFugal ClutCh

Technical DataDESCRIPTION EET60H EET75HDIMENSION-LxWxH - in (mm) 65 x 25 x 43 (1,650 x 630 x 1,100) 60 x 30 x 39 (1,520 x 750 x 990)GUARD RING DIAMETER - in (mm) 24 (600) 30 (750)OPERATING WEIGHT - lb (kg) 123 (56) 141 (64)HANDLE TYPE FOLDABLE (FULL-FOLD) FOLDABLE (FULL-FOLD)FINISHiNG BLADE SIZE - in (mm) 9 x 4.7 (230 x 120) 10.6 x 4.7 (270 x 120)MAX. BLADE PITCH ANGLE(°) 14 14BLADE OPERATIN SPEED (rpm) 85-135 85-138ENGINE OPTIONS HONDA [email protected](2.9HP) HONDA [email protected](4.0HP)



















POWER TROWEL - EWT90

EWT90This 36-inch (90mm) class machine is perfect for the smaller floors and provides for easy operations with excellent balance for professional finishes.

Technical DataDESCRIPTION EWT90DIMENSION (LxWxH) – mm (in) 76.5 x 39.1 x 44.1

(1,944 x 992 x 1,120)GUARD RING DIAMETER - in (mm) 39.1 (992)OPERATING WEIGHT - lb (kg) 170 (77)HANDLE TYPE STRAIGHTGEARBOX HEAVY-DUTYMAX. BLADE PITCH ANGLE - ° 15NO. OF BLADES 4BLADE OPERATING SPEED - rpm 50 – 150ENGINE HONDA GX160ENGINE TYPE 4-STROKE GASOLINEMAX. POWER OUTPUT - HP (kW) GX160 @ 4.8 (3.6)

Trowel handle with padded bar has adjustable operator’s handle, centrifugal safety switch to turn the engine off in case of the operator losses control of the handle

Adjustable Operators Handle allows the operator to adjust the end of the handle for the most comfortable operation. This reduces fatigue and provides more comfort to the operator. The handle can be placed fully forward to save space for transport and storage.

Rapid Pitch Blade Adjustment is a standard feature of the ESI trowel for quick adjustment of the blade pitch, more convenient than an adjust-ment knob. Faster blade adjustment when moving from the float to finish process. Throttle assembly is a heavy-duty rack and pinion design made out of cast aluminum, no stamped metal parts to bend on you while you operate the throttle.


Wraparound steel engine protection with integral lifting bale, gives the engine the protection it needs and offers a secure lifting point for trans-portation.

CE approved guard ring provides the operator safety during operation

Heavy duty long‐lasting gear box efficient well-balanced design to give your slab a quality finish

Cast iron spider assembly with bronze bushings, the heart of the trowel’s bottom end. Maintenance and repair is greatly reduced, adjustable trowel arms mean a truer floor and higher quality finish


















POWER TROWEL - EWT120


EWT120The 46-inch (120mm) class trowel is what the professional finisher demands for high produc-tion and maximum flatness.

Technical DataDESCRIPTION EWT90DIMENSION (LxWxH) – mm (in) 80.8 x 47.2 x 44.7

(2,053 x 1,200 x 1,135)GUARD RING DIAMETER - in (mm) 47.2 (1,200)OPERATING WEIGHT - lb (kg) 209 (95)HANDLE TYPE STRAIGHTGEARBOX HEAVY-DUTYMAX. BLADE PITCH ANGLE - ° 15NO. OF BLADES 4BLADE OPERATING SPEED - rpm 50 – 150ENGINE HONDA GX270ENGINE TYPE 4-STROKE GASOLINEMAX. POWER OUTPUT - hp (kW) GX270 @ 8 (6)

Trowel handle with padded bar has adjustable operator’s handle, centrifugal safety switch to turn the engine off in case of the operator losses control of the handle

Adjustable Operators Handle allows the operator to adjust the end of the handle for the most comfortable operation. This reduces fatigue and provides more comfort to the operator. The handle can be placed fully forward to save space for transport and storage.

Rapid Pitch Blade Adjustment is a standard feature of the ESI trowel for quick adjustment of the blade pitch, more convenient than an adjust-ment knob. Faster blade adjustment when moving from the float to finish process. Throttle assembly is a heavy-duty rack and pinion design made out of cast aluminum, no stamped metal parts to bend on you while you operate the throttle.


Wraparound steel engine protection with integral lifting bale, gives the engine the protection it needs and offers a secure lifting point for trans-portation.

CE approved guard ring provides the operator safety during operation

Heavy duty long‐lasting gear box efficient well-balanced design to give your slab a quality finish

Cast iron spider assembly with bronze bushings, the heart of the trowel’s bottom end. Maintenance and repair is greatly reduced, adjustable trowel arms mean a truer floor and higher quality finish



















RIDE-ON POWER TROWELS

RIDE-ON POWER TROWELS ESI Riders provide the dependability you can count on in the toughest applications to obtain excellent flat concrete floor finishing results. ESI riders are constructed of the highest quality materials and workmanship in the USA based on years of power trowel design, manufacturing and sales experience. These ride-on trowels are solid, basic, dependable machines that will perform to your expectations. Desirable design and operation features are stan¬dard plus your basic accessories such as blades, pans, and transport dollys for easy movement around the job site are all readily available.

Look to ESI for your concrete finishing needs.

ERT2X90H

The smallest ESI 36 Rider incorporates the same high quality construction and features found on the larger models, and the ERT2X90H is ESI to transport, perfect smaller jobs and tight spots.• Twin 36” 4-blade spiders designed to fit on those smaller slabs and tight areas. • Honda GX-390 gasoline engine• Proven & durable standard-duty gearboxes• Adjustable seat• Retardant tank with powered spray nozzles• Independent manual pitch control & ESI manual steering• 4 halogen work lights (front and rear)

ERT2X120V

The ESI Pro 35 Rider is the machine of choice with plenty of power for panning and the rotor speeds needed for finishing. The ERT2X120V is the primary choice and work horse of professional finishers worldwide.

• Twin 46” 5-blade spiders for maximum flat floor production • Vanguard 35HP gasoline engine• Super Heavy-Duty gearboxes• Adjustable seat• Retardant tank with powered spray nozzles• Independent manual pitch control & ESI manual steering• Built-in cup holder & included lifting bridle for loading & unloading• 4 halogen work lights total (front and rear)

RIDE-ON POWER TROWELS ERT2X120TD

The ESI Pro 44 HP Rider is the elite ride-on trowel for the true professional with the big jobs requiring the highest production and the tightest tolerances. The ERT2X120TD is turbo diesel powered and built for large-scale panning and finishing still at an economical price.

• Twin 46” 5-blade spiders for maximum flat floor production • Kubota 44 HP Turbo-charged diesel engine• Hydraulic joystick powered steering - mechanical blade pitch and final drive• Super Heavy-Duty gearboxes• Adjustable seat with arm rests• Retardant tank with powered spray nozzles• Built-in cup holder & included lifting bridle for loading & unloading• 6 halogen work lights total (front and rear)

Technical DataMODEL ERT2X90H ERT2X120V ERT2X120TDDimensinos (L X W X H) 78 in x 41 in x 53 in

(198 x 104 x 135 cm)101.5 in x 50.5 in x 58 in

(254 x 128 x 147 cm)101.5 in x 50.5 in x 59.5 in

(254 x 128 x 151 cm)Panning Path Width 74 in (188 cm) 97.5 in (248 cm) 95 in (241 cm)Rotors (diameter) 36 in (914 mm) 4-Bladed Spider 46 in (1,168 mm) 5-Bladed Spider 46 in (1,168 mm) 5-Bladed SpiderMaximum Rotor Speed 145 RPM 145 RPM 140 RPMWeight 735 lbs (333 kilos) 1,047 lbs (475 kilos) 1,450 lbs (658 kilos)Steering Manual Manual PowerCruise Control No No YesEngine GX690 Honda Air-Cooled Gas 35 HP Vanguard Air-Cooled Gas 44 HP Turbo Charged Kubota DieselFuel Capacity 6 gal (23 lit) 6 gal (23 lit) 6 gal (23 lit)

RIDE-ON POWER TROWELS



The ESI Choice

101 Gannaway Drive, Suite # 3PO Box 997

Jamestown, North Carolina 27282Phone: 866.648.7101

Fax: 336.310.1177Email: [email protected]


ESI eCatalog

Documents

cast iron base plate

engine oil lifting handles

engine honda gx100engine

plate size lxw

cast aluminum

integral lifting bale

replaceable padded handle

secure lifting point