Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected]• www.kippertool.com (6/00) DREMEL DRE-01 PROFESSIONAL HIGH SPEED ROTARY TOOL PROFESSIONAL HIGH SPEED ROTARY TOOL KIT Don’t See What You Need ? Call 1-800-295-9595 Made in USA Features / Benefits 1. Electric feedback controller. Enhances overall torque and performance at low & mid-speed ranges. 2.Variable speeds (5,000 - 30,000 RPM). Provides increased control & precision. 3. Separate on / off and variable speed buttons. Provides easy access & convenient speed adjustment. 4. Digital LCD readout. Provides accurate speed readouts in 1,000 RPM increments. 5. “Soft Start”. Allows the tool to come up to a selected speed gradually. 6. Ergonomic design. Balanced, easy to handle & comfortable to use. 7. Ball bearing construction. Smooth & quiet operation. 8. Unique fan design. Maximizes airflow for cool motor performance. 9. Replaceable motor brushes. Longer tool life. 10. Accepts all Dremel rotary tool accessories and attachments. Motor: 120V, 50-60 Hz, AC, 1.15 Amps. Power Cord: 10’ RPM: 5,000 - 30,000 Contents • Professional High Speed Rotary Tool • Customized Storage Case • Collect Wrench • 25 Assorted Accessories • 175+ Uses Book Dremel Cat. No. 3981
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• Two Speed Multipro Tool• Quick Change Collet Nut• Customized Storage Case• Wrench• 30 Assorted Accessories• 175+ Uses Book
TWO SPEED MULTIPROTM
KIT
Cat. No.275
Contents
• Single Speed Multipro Tool• Quick Change Collet Nut• Wrench• 5 Assorted Accessories• 175+ Uses Book
SINGLE SPEED MULTIPROTM TOOL KIT
Cat. No.2750
Contents
• Single Speed Multipro Tool• Quick Change Collet Nut• Accessory Holder• Wrench• 15 Assorted Accessories• 175+ Uses Book
SINGLE SPEED MULTIPROTM KIT
Cat. No.565
Includes cutting guide, (2) drywall cuttingbits for cutting drywall for electrical boxes& air vents. (1) Multipurpose cutting bit formaking cuts in ceiling, tile, wood, plastic,fiberglass, drywall, laminate and vinyl siding.
CUTTING KITS
MULTIPROTM
TOOL ATTACHMENTS
Cat. No.3956
MULTIPURPOSECUTTING KIT
Cat. No.566
Includes cutting guide, (1) tile cutting bit forfor shaping ceramic wall tile around fixturesor plumbing pipes. Not for use on ceramicfloor tile.
TILE CUTTING KIT
Cat. No.3955
Provides controlled cutting in a variety ofmaterials.1. Easily attaches to corded Rotary Tool in
place of the housing cap.2. Easy depth adjustment. Set cutting
Cuts ceramic wall tile, cement board, andplaster. (Not for use on floor tile).
Do not run in excess of 30,000 RPM.
1/32”0,8 mm
1/16”1,6 mm
3/32”2,4 mm
1/32”0,8 mm
1/16”1,6 mm
5/64”1,9 mm
1/32”0,8 mm
3/64”1,2 mm
1/16”1,6 mm
105 106 107 108 109 110 111 112 113
Don’t See What You Need ?Call 1-800-295-9595
DIAMOND WHEEL POINTS
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade,ceramic, glass, hardened steel, semiprecious stones and other hard materials. Bits are covered with diamond particles.
5/64”2,0 mm
11/64”4,4 mm
3/8”9,5 mm
17/64”6,7 mm
3/32”2,4 mm
3/16”4,8 mm
5/64”2,0 mm
3/32”2,4 mm
7103 7105 7117 7120 7122 7123 7134 7144
HIGH SPEED CUTTERS
High speed cutters can be used for shaping, hollowing, grooving, slotting, making taperedholes in soft metals, plastics and woods. No 198 and 199 cutters can be used to make smallslits. Do not run in excess of 30,000 RPM.
For routing, inlaying, and mortising in wood and other soft materials. Use with Dremel No.230 & 330 Router Attachment and No. 231 Shaper / Router Table. Made of high speed steel.Do not run in excess of 30,000 RPM.
1/4”6,4 mm
Core Box
1/2”12,7 mmChamfer
3/32”2,4 mm
Piloted Beading
1/8”3,2 mm
Corner Rounding
1/4”6,4 mm
V Groove
1/8”3,2 mmStraight
3/16”4,8 mmStraight
1/4”6,4 mmStraight
617 618 612 615 640 650 652 654
TUNGSTEN CARBIDE CUTTERS
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel,cast iron, non ferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Do not run in excess of 30,000 RPM.
1/8”3,2 mm
3/32”2,4 mm
3/32”2,4 mm
1/8”3,2 mm
1/8”3,2 mm
1/8”3,2 mm
1/8”3,2 mm
1/8”3,2 mm
1/8”3,2 mm
1/8”3,2 mm
9901 9902 9903 9904 9905 9906 9909 9910 9911 9912
TUNGSTEN CARBIDE CUTTERS
Use for shaping, smoothing and materialremoval. Use on hardened steel, stainless steel, cast iron, non ferrousmetals, fired ceramics, plastics, hardwoods and other hard materials.Use with 236 handpiece. Do not run in excess of 30,000 RPM.
1/4”6,4 mm
1/4”6,4 mm
1/4”6,4 mm
9951 9953 9955
TUNGSTEN CARBIDE CUTTERS
Use for shaping, smoothing and materialremoval. Use on hardened steel, stainless steel, cast iron, non ferrousmetals, fired ceramics, plastics, hardwoods and other hard materials.Use with 236 handpiece. Do not run in excess of 30,000 RPM.
1/4”6,4 mm
1/4”6,4 mm
9958 9959
STRUCTURED TOOTH TUNGSTEN CARBIDE CUTTERS
Fast cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy,rubber, laminates, particle board, soft metals, ceramic tile. Use 1/4” shank with 236 handpiece.Do not run in excess of 30,000 RPM.
For cutting and shaping on soft and hardwoods, fiberglass, plastics and laminates.Do not run in excess of 30,000 RPM.
SILICON CARBIDE GRINDING STONES (BLUE / GREEN)
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals.Do not run in excess of 30,000 RPM.
9/32”7,0 mm
1/8”3,2 mm
1/8”3,2 mm
3/16”4,8 mm
25/32”19,8 mm
13/32”10,3 mm
1/2”13,0 mm
83142 83322 83702 84922 85422 85602 85622
ALUMINUM OXIDE GRINDING STONES (RED / BROWN)5/8”
15,9 mm7/16”
11,1 mm1/2”
13,0 mm3/8”
9,5 mm5/8”
15,9 mm3/8”
9,5 mm3/16”
4,8 mm1/4”
6,4 mm
903 911 921 932 941 952945
ABRASIVE POINTS
Abrasive points are great for finishing workand light deburring. They can be used forpaint and rust removal without removingany of the base matter.Do not run in excess of 30,000 RPM.
1/8”3,2 mm
1/8”3,2 mm
1/8”3,2 mm
516 517 518
ALUMINUM OXIDE ABRASIVE WHEELS
Perfect for cleaning, deburring, removingrust, and polishing of most metals, including stainless steel.Do not run in excess of 30,000 RPM.
1”25,4 mm
500
5/32”4,0 mm
3/16”4,8 mm
7/32”5,6 mm
ALUMINUM OXIDE GRINDING WHEELS
Use for deburring, removing rust and general purpose grinding. Use with Mandrel 402.Do not run in excess of 30,000 RPM.
541 2 Per Pack
CHAIN SAW SHARPENING STONES
Precision ground for quick, easy sharpen-ing of chain saw blades.Do not run in excess of 30,000 RPM.
453 454 455
CUTTING / SHAPING WHEEL(CARBIDE) MANDREL INCLUDED
953
1/4”6,4 mm
5/8”15,9 mm
1/4”6,4 mm
3/16”4,8 mm
3/8”9,5 mm
1”25,4 mm
5/8”15,9 mm
954 971 997 8153 8175 82158193
Use on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring andgeneral purpose grinding of most materials. Do not run in excess of 30,000 RPM. www.kippertool.com
5 Per PackDiameter: 1-1/4” (32,0 mm)Thickness: .045” (4,5 mm)
For slicing and cutting metal, wood andplastic. Cut off wheels make it easy to cutor slot bolts, screws, sheet metal, thin woodand plastic. The cut off wheels cuts onlyalong its edge. Do not attempt to sand orcut curved holes with them.Do not run in excess of 30,000 RPM.
POLISHING ACCESSORIES
Ideal for polishing metals and plastics.Using compound No. 421 with wheels produces a high luster. Do not run inexcess of 30,000 RPM.
Cat. No.426
5 Per PackDiameter: 1-1/4” (32,0 mm)Thickness: .0625” (1,6 mm)
Cat. No.540
CUT OFF WHEELFIBERGLASS REINFORCED
Use with felt or cloth accessories to polishmetals and plastics. Compound will removea dull oxidized film and/or light surfaceimperfections.
Cat. No.421
POLISHINGCOMPOUND
Use with Mandrel 401. Diameter: 1/2”
Cat. No.414
FELT
Cat. No.425 Use with Mandrel 402.
EMERY IMPREGNATED
Cat. No.427 Use with Mandrel 424.
Use with Mandrel 401. Diameter: 3/8”
Cat. No.422
Use with Mandrel 401. Diameter: 1”
Cat. No.429
CUT OFF WHEEL
20 Per PackDiameter: 15/16” (23,8 mm)Thickness: .040” (1,0 mm)
Cat. No.420
HEAVY DUTY CUT OFF WHEEL
36 Per PackDiameter: 15/16” (23,8 mm)Thickness: .025” (0,64 mm)
Cat. No.409
CUT OFF WHEEL
1/4”6,4 mm
1/4”6,4 mm
1/4”6,4 mm
RUBBER POLISHING POINTS
Blue points for finishing and polishing allferrous metals. Removes small burrs andscratch marks left be grinding and sanding,and cleans and defines grooves. Alsoeffective on many stones and ceramic.Do not run in excess of 30,000 RPM.
Cat. No.423 Use with Mandrel 402. Do not run in excess of 30,000 RPM.
Cat. No.502
FLAPWHEELS
Cat. No.411 Course 180 Grit412 Medium 220 Grit413 Fine 240 GritUse with mandrel 402.
3/4”19,0 mm
1/2”13,0 mm
1/8”3,2 mm
BRISTLE BRUSHES
Use for light deburring, cleaningpolishing of silverware, jewelryand other precious metals. Can be used with polishing compound. Do not run inexcess of 15,000 RPM.
403 404 405
3/4”19,0 mm
1/2”13,0 mm
1/8”3,2 mm
STAINLESS STEEL BRUSHES
Stainless steel brushes do notcause “after-rust” when used oncorrosive-resistant materials likepewter, aluminum and stainlesssteel. Do not run in excess of15,000 RPM.
530 531 532
DISCS
402
3/8”9,5 mm
80 Grit
Cat. No.504
Cat. No.505
3/16”4,8 mm
80 Grit
Cat. No.503
3/8”9,5 mm
120 Grit
3/16”4,8 mm
120 Grit
411
412
413
3/4”19,0 mm
1/2”13,0 mm
1/8”3,2 mm
STAINLESS STEEL BRUSHES
Stainless steel brushes do notcause “after-rust” when used oncorrosive-resistant materials likepewter, aluminum and stainlesssteel. Do not run in excess of15,000 RPM.
530 531 532
3/4”19,0 mm
1/2”13,0 mm
1/8”3,2 mm
CARBON STEEL BRUSHES
Versatile brush for removing rustand corrosion, polish metal surfaces. Deburr and blend surface junctures, clean electrical components. Do notrun in excess of 15,000 RPM.
428 442 443
Flapwheels grind and polish flat or contoured surfaces. They are used mosteffectively as a finishing sander after heavier surface sanding and materialremoval is completed.
3/4”19,0 mm
1/2”13,0 mm
1/8”3,2 mm
BRASS BRUSHES
Brass brushes are non sparkingand softer than steel. They willnot scratch soft metals like gold,copper, brass. Do not run inexcess of 15,000 RPM.
The Dremel MultioPro chuck allows you toquickly and easily change accessories onyour Dremel MultiPro rotary tools withoutchanging collets. Will accept accessorieswith 1/32” - 1/8” shanks. Use only with cord-ed MultiPro rotary tool models 395, 285,275, and 595.
DRESSING STONE
Cat. No.415
Clean grinding wheels. Shape or reshapefor desired applications.
Includes collet nut and 4 collets. For use with all rotary tools except models1, 2, & 260, 270, 280 series 1 or earlier.
1/8”3,2 mm
3/32”2,4 mm
1/16”1,6 mm
1/32”0,8 mm
1”25,4 mm
3/8”9,5 mm
1/8” INCH DRILL
Cat. No.150
480 481 482 483
For rough shaping and smoothing wood and fiberglass; removing rust from metal surfaces;shaping rubber surfaces. Sander bands are easily replaceable on drums.
Decorative carving in furniture; clean outdetail grooves; clean glue off dowels, joints;cuts off dowels; remove glue to redo caningand upholstery. 62 Pieces!
AUTO/CYCLE REPAIR KIT
Cat. No.621
Clean spark plugs; cut off muffler nuts/bolts;rust removal; deburr engine block; grindcylinder heads; cut off hose clamps. 50 Pieces!
HOME IMPROVEMENT KIT
Cat. No.622
Drill holes in wood; sand door locks orjams, window frames or woodwork; cut wire closet organizers; polish door plate or drawer handles; sharpen lawn mower blade or tools. 65 Pieces!
AUTO/CYCLE DETAIL KIT
Cat. No.623
Clean cracks and crevices in the dash orhood; polish chrome emblems; remove rustand paint; brush away dirt and corrosion. 22 Pieces!
HANDYMAN KIT
Cat. No.629
Cut or trim nuts/bolts; fine sanding on furni-ture; drill a hole to hang a picture; sharpenscissors, blades or other tools; polish brassfixtures. 60 Pieces!
CRAFT KIT
Cat. No.630
To shape, sand wood animal figures orornaments; etch designs; miniature doll fur-niture making; cut off backs of earrings andbuttons for decorations. 56 Pieces!
1. Wide selection of accessories.A variety of sandpaper, contour shapes and detail pads sand a range of curved, angled shapes and larger surfaces to eliminate hand sanding.
2. Compact, lightweight design.At under 2 lbs. this tool is designed for hours of comfortable use with precision control.
3. 4,000 - 8,500 variable strokes per minute.Variable speed gives you all the power and control to complete a variety of sanding tasks.
4. Exclusive quick change accessory release.Quickly, change from contour to detail pad without extra keys or wrenches.
5. Long lasting reusable sanding tubes.Sanding tubes slip easily over all contours and can be rotated 360o for longer life.
6. Longer tool life. Cool running ball bear-ing construction and easily replaceablemotor brushes help sander perform longerand operate more efficiently.
Allow for extremely tight radius cutting andintricate cuts in wood, plastic, and fibrousmaterials. 5 per pack.
METAL PIERCING BLADES
Cat. No.16483
Cut precious and non-ferrous metals. Mustbe used at slow speed. Perform best whenlubricated with bees wax. 5 per pack.
REVERSE TOOTH BLADES
Provides a smooth, splinter free finish.Leaves a clean, sharp edge on both the topand bottom of your wood piece. 12 per pack.
Cat. No.16461
SPIRAL BLADES
Cut in all directions without turning the workpiece. 5 per pack.
PERMA-GRITTM BLADES
Tungsten carbide coated blades shape andcut ceramic wall tiles. Also for cutting thinwood. Cut in any direction without turningyour workpiece. Not for use on floor tiles. 1 per pack.
Universal TeethNumber Width Thickness Per Inch2/0 .022 .010 28
Universal TeethNumber Width Thickness Per Inch2 .029 .012 20
Universal TeethNumber Width Thickness Per Inch5 .038 .016 12.5
Universal TeethNumber Width Thickness Per Inch7 .045 .017 11.5
Cat. TeethNumber Kerf Per Inch16471 .031-033 60
Cat. TeethNumber Kerf Per Inch16472 .046-048 120
Universal TeethNumber Width Thickness Per Inch12 .062 .020 9.5
Universal TeethNumber Width Thickness Per Inch5 .032 .016 36
Universal TeethNumber Width Thickness Per Inch2R .026 .012 20-F
14-R
Universal TeethNumber Width Thickness Per Inch5R .047 .017 11.5-F
14-R
Universal TeethNumber Width Thickness Per Inch7R .038 .016 12.5-F
9-R
Universal TeethNumber Kerf Per Inch0 .028- .030 46
Cat. No.16463
Universal TeethNumber Kerf Per Inch2 .034- .036 41
• 6 Different design tips!Replaceable and interchangeable for maximum versatility.
Contents
• Versa Tip Tool• 5 Tips (470, 471, 473, 474 & 499)• Tool Stand• Handy Tip Storage Tube
Accessories
• 470 Soldering Tip• 471 General Purpose Tip• 472 Grading Tip• 473 Script Tip• 474 Fine Cutting Tip• 499 Hot Knife Tip
Max. Tip Temp: 1,050o F (565o C)Volts: 110 - 120V, ACWatts: 30 Tool Length: 7-3/8” (187,3mm)
Multipurpose lamp with 4”diameter, magnifier lensand adjustable 39” armreach for superior worklighting. Includes bracketfor bench or desk topmounting. For models1671, 1672 and 1695.
SCROLL SAWSTAND
Painted finish resistsrusting and leg padskeep stand from slipping.For models 1671, 1672,1680 and 1695.