Top Banner
www.labec.com.au Laboratory Equipment Pty Ltd email: [email protected] Ph: 02 9560 2811 Fax: 02 9560 6131 Serving the Scientific, Medical and Research industries since 1945 2014 Dissolution Tester LABEC Dissolution Tester is used to test the dissolution condition of chemicals under the set temperature. The rotary speed is non-limitary variation and can be adjusted at any required speed. The digital readout provides a continuously updated accurate reading of shaft rpm. The temperature of water-baths can be set to single temperature or programmed to ramp to temperature automatically. The circuit breaker device can prevent from leakage current. Thus it can provide safety when used. The paddle shafts are made of SUS 316 stainless steel. M-DISS-06 / 6 Station Online Automatic System with syringe pump & UV Spectrophotometer Model M-DISS-06 Speed (rpm) 10-250 Power AC110V/60Hz, 220V/50/60Hz Electric control Stepless speed control Safety Device Low water/over heat, safety break for leakage of electricity Temperature Digital control system Heater (W) 900W Constant temp. in water tank Water circulation type Fuse 10A/6A Weight (kg) 62 Applications: The Labec Pharmaceuticals Advanced Dissolution Testing System for the Dissolution Testing of tablets, capsules, pills, pellets, solid dosage forms and various type of pharmaceutical products for quality control, research and development. Also suitable for Pharmacy Laboratories in University and Educational Institutes. Description: The tablet dissolution testing is one of the most important tests during the method developments and manufacturing of solid dosage forms in pharmaceutical industries, Universities & Educational institutes in Pharmacy research laboratories. All international Pharmacopoeias require a dissolution test apparatus at least 6 samples should be tested & test vessels, rotation speed, temperature ranges, accuracy & stirrer tolerance are clearly described & specified.
1

Dissolution Tester - Labec€¦ · Dissolution Tester LABEC Applications: Dissolution Tester is used to test the dissolution condition of chemicals under the set temperature. The

Feb 08, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • www.labec.com.au

    Laboratory Equipment Pty Ltdemail: [email protected] Ph: 02 9560 2811 • Fax: 02 9560 6131

    Serv

    ing

    the

    Scie

    ntifi

    c, M

    edic

    al a

    nd R

    esea

    rch

    indu

    stri

    es s

    ince

    194

    5

    2014

    Dissolution Tester

    LABEC Dissolution Tester is used to test the dissolution condition of chemicals under the set temperature. The rotary speed is non-limitary variation and can be adjusted at any required speed. The digital readout provides a continuously updated accurate reading of shaft rpm. The temperature of water-baths can be set to single temperature or programmed to ramp to temperature automatically. The circuit breaker device can prevent from leakage current. Thus it can provide safety when used. The paddle shafts are made of SUS 316 stainless steel.

    M-DISS-06 / 6 Station Online Automatic System with syringe pump & UV Spectrophotometer

    Model M-DISS-06Speed (rpm) 10-250Power AC110V/60Hz, 220V/50/60HzElectric control Stepless speed control

    Safety Device Low water/over heat, safety break for leakage of electricity

    Temperature Digital control systemHeater (W) 900WConstant temp. in water tank Water circulation typeFuse 10A/6AWeight (kg) 62

    Applications: The Labec Pharmaceuticals Advanced Dissolution Testing System for the Dissolution Testing of tablets, capsules, pills, pellets, solid dosage forms and various type of pharmaceutical products for quality control, research and development. Also suitable for Pharmacy Laboratories in University and Educational Institutes.

    Description: The tablet dissolution testing is one of the most important tests during the method developments and manufacturing of solid dosage forms in pharmaceutical industries, Universities & Educational institutes in Pharmacy research laboratories. All international Pharmacopoeias require a dissolution test apparatus at least 6 samples should be tested & test vessels, rotation speed, temperature ranges, accuracy & stirrer tolerance are clearly described & specified.