DATA SHEET BROCADE 1010 AND 1020 CNAs · 2014-06-17 · Brocade Network Advisor enables organizations to simultaneously monitor and manage multiple CNAs—along with Brocade HBAs,

SERVER CONNECTIVITY

DATA SHEET www.brocade.com

FCoE encapsulates and transmits Fibre Channel frames over this enhanced Ethernet infrastructure while preserving the Fibre Channel constructs and management paradigm for backward compatibility and investment protection.

By leveraging these technologies, Brocade CNAs enable organizations to consolidate multiple 1 GbE NICs and Fibre Channel Host Bus Adapters (HBAs) into a single adapter. Combined with the top-of-rack Brocade 8000 Switch, the FCOE10-24 Blade for the Brocade DCX® Backbone family, and Brocade Network Advisor, Brocade CNAs provide a powerful 10 Gbps solution that helps consolidate both TCP/IP and storage (iSCSI/Fibre Channel) traffic over a single link. This helps significantly reduce server deployment costs, as well as power and cooling requirements, delivering best-in-class LAN and SAN connectivity while reducing Total Cost of Ownership (TCO).

BROCADE1010 AND 1020CNAs

HIGHLIGHTS• Provides high-performance line-rate

10 Gbps Ethernet for enterprise-class, reliable LAN connectivity

• Supports Data Center Bridging (DCB) for low-latency, lossless, and deterministic 10 Gbps Ethernet connectivity and storage over Ethernet applications (FCoE/iSCSI)

• Delivers advanced Ethernet performance, including IPv4 and IPv6 checksum offload, RSS, HDS, jumbo frame support, and TSO

• Provides scalable connectivity features across a secure, multiprotocol, lossless environment

• Enables a single driver for both Brocade CNAs and Fibre Channel HBAs

• Provides an integral part of the Brocade DCB/FCoE solution

Enterprise-Class Connectivity for Next-Generation Virtual Data Centers Today’s IT professionals face the difficult challenge of reducing data center cost and complexity while satisfying numerous Service Level Agreements (SLAs) and performance requirements. As a result, organizations are seeking ways to improve server and storage utilization, reduce ongoing operational costs, and increase their flexibility and responsiveness.

The Brocade® 1010 (single port) and 1020 (dual port) Converged Network Adapters (CNAs) integrate 10 Gbps Ethernet Network Interface Card (NIC) functionality with Fibre Channel technology—enabling transport over a 10 Gigabit Ethernet (GbE) connection through the Data Center Bridging (DCB) and Fibre Channel over Ethernet (FCoE) protocols. This approach provides best-in-class LAN connectivity and server I/O consolidation, helping to reduce cost and complexity in next-generation data center environments.

IMPROVED TCO THROUGH I/O CONSOLIDATION DCB is a set of industry standards that enhances Ethernet protocol to enable low-latency, lossless, and deterministic network infrastructure for storage and other highly demanding traffic types. Brocade CNAs support all of these standards, including Priority-based Flow Control (PFC), Enhanced Transmission Selection (ETS), Congestion Notification (CN), and Data Center Bridging Exchange (DCBX).

SIMPLIFIED MANAGEMENTBrocade Network Advisor enables organizations to simultaneously monitor and manage multiple CNAs—along with Brocade HBAs, switches, directors, and backbones—from a single, centralized location. By leveraging Brocade Network Advisor, organizations can apply a holistic approach to data center management in both physical and virtual environments.

Brocade CNAs enable Virtual Machine (VM) discovery in VMware ESX environments within Brocade Network Advisor. VM discovery provides an end-to-end view of the VM-to-Logical Unit Number (LUN) path information for all the VMs running on each physical server. This provides unprecedented levels of visibility into the virtual server infrastructure, enabling network administrators to more efficiently manage their storage network resources.

Brocade Network Advisor reduces Total Cost of Ownership (TCO) through features such as customizable dashboards and historical data visibility. In addition, seamless configuration capabilities such as wizard-based configuration, integrated SAN diagnostics, policy monitoring, bottleneck detection, FICON Port Decommissioning, and Boot LUN Zoning improve business agility.

CNA management and VM visibility features are available in all three editions of Brocade Network Advisor: Professional, Professional Plus, and Enterprise. For simple device configuration, driver updates, or to obtain CNA and port statistics, a Graphical User Interface (GUI) element manager—Brocade Host Connectivity Manager (HCM)—and a Command Line Interface (CLI) are also available. Both Brocade Network Advisor and HCM provide open APIs and standards-based interfaces for integration with popular third-party applications and higher-level frameworks to help orchestrate Brocade hardware and network services.

UNMATCHED PERFORMANCE The explosive growth of server virtualization and high-bandwidth applications, such as video-on-demand and High Performance Computing (HPC), is leading to increased performance demands, making 10 Gbps connectivity a key requirement. Recent advances in server technology, including Intel Nehalem processors, now enable servers to run more workloads, increasing consolidation and virtualization ratios. With

more VMs deployed per server, network bandwidth and storage I/O requirements are higher than ever before.

Brocade CNAs are full-featured 10 GbE NICs that deliver 10 Gbps line-rate performance per port. They provide stateless networking offloads such as TCP checksum and segmentation offloads for improved performance and more efficient CPU usage. Additional CPU cycles can then be dedicated to additional application processing.

Brocade CNAs deliver full hardware-based FCoE offload to provide superior performance for storage applications, with up to twice the performance of competitive offerings in real-world application scenarios.

Ultimately, this means that businesses of all sizes can scale their virtual server deployments and virtualize highly demanding applications with greater confidence, resulting in better server resource utilization and lower capital and operational costs.

OPTIMIZED FOR VIRTUAL ENVIRONMENTS In non-virtualized environments, applications are tied to physical servers, which in turn connect to physical switch ports in a “static” manner. Applying network policies or monitoring application performance is simple because the applications are permanently associated with the physical ports.

With server virtualization, multiple applications share a physical switch port. Furthermore, applications can move across

the virtualized server infrastructure based on a number of user-defined policies and in response to dynamic business requirements. Virtualization hypervisors implement virtual switching technologies to connect the VMs to the network, and to move data between VMs.

Virtual Machine Optimized Ports (VMOPs) offload the hypervisor of essential virtual switching tasks, such as incoming packet classification and sorting tasks, helping to reduce latency and improve throughput while freeing CPU cycles that can be used to further scale an organization’s virtualization environment.

Brocade CNAs support N_Port ID Virtualization (NPIV) with up to 255 virtual ports, and are qualified with all major hypervisor solutions in the industry. Leveraging NPIV technology, organizations can extend Brocade fabric services to the server and all the way to the VM and application level.

Optimal Support for Windows Server 2012 Brocade CNA support of Windows Server 2012 policy-based QoS enables administrators to specify network bandwidth controls based on application type, users, and servers for the physical network. In addition, support of Hyper-V QoS enables cloud hosting providers and enterprises to deliver predictable network performance for multiple types of traffic for VMs on Windows Server 2012 servers equipped with Brocade 1010 and 1020 adapters running in DCB mode.

Figure 1. Brocade Network Advisor provides unified management of network and server connectivity resources with end-to-end VM visibility.

Brocade Network Advisor

HBAs

VM Visibility

Fabric

End-

to-E

nd V

isib

ility

Storage

BROCADE GLOBAL SERVICES Brocade Global Services has the expertise to help organizations build scalable, efficient cloud infrastructures. Leveraging 15 years of expertise in storage, networking, and virtualization, Brocade Global Services delivers world-class professional services, technical support, network monitoring services, and education, enabling organizations to maximize their Brocade investments, accelerate new technology deployments, and optimize the performance of networking infrastructures.

MAXIMIZING INVESTMENTS To help optimize technology investments, Brocade and its partners offer complete solutions that include professional services, technical support, and education. For more information, contact a Brocade sales partner or visit www.brocade.com.

Figure 2. Brocade CNAs can provide twice the performance of competitive offerings in real-world application scenarios.

Host SpecificationsServer platform Intel (IA32, IEM64T), AMD (x86, 64), and Oracle/Sun (x86, SPARC)Server chipset Intel, nVidia, ServerWorks/Broadcom, AMD/ATI, and SPARCBus interface PCI Express Gen 2.0

Compatible (x8) with MSI-X and INTx

FCoE SpecificationsProtocols FC-SP, FC-LS, FC-GS, FC-FS2, FC-FDMI, FC-CT, FCP, FCP-2, FCP-3, FC-BB-5.

See documentation for full list of supported protocols.Performance Up to 500 K IOPS per port (1 M IOPS per dual-port adapter)

• 330,000 IOPS per port with 4 KB block size and 60% read/40% write operations (typical e-mail)

• 205,000 IOPS per port with 8 KB block size and 60% read/40% write operations (typical database)

Logins Support for 2048 logins and 4096 exchangesClass of service Class 3, Class 2 control frames supported

Ethernet SpecificationsDCB support Priority-based Flow Control (PFC: 802.1Qbb)

Enhanced Transmission Selection (ETS: 802.1Qaz)Congestion Notification (802.1Qau)Data Center Bridging Exchange (DCBX)

Performance 10 Gbps full-duplex line rateFrame sizes All standard Ethernet frame sizes supported, including:

9600 byte jumbo frames and mini-jumbo framesEthernet acceleration IPv4/IPv6, TCP, and UDP checksum offload; IPv4 header checksum offload;

TCP Segmentation Offload (TSO); Receive Side Scaling (RSS); Header Data Split (HDS); VLAN insertion/stripping and filtering

SoftwareManagement • Brocade Host Connectivity Manager (HCM)

• Brocade Configuration Utility (BCU) Command Line Interface (CLI)• Brocade Network Advisor

Driver- and HCM-supported operating systems (check the Brocade Server Adapters Interoperability Matrix for a complete list)

Windows Server 2003/2008/2008 R2/2012 (Hyper-V); RHEL 4/5/6; SLES 9/10/11; Solaris 10/11 (x86 and SPARC); and VMware ESX 3.5, ESX/ESXi 4.0/4.1/5.0/5.1

Management APIs SNIA HBA API v2.0, SMI-S, and FDMI-1

BROCADE 1010 AND 1020 SPECIFICATIONS

DATA SHEET www.brocade.com

© 2013 Brocade Communications Systems, Inc. All Rights Reserved. 03/13 GA-DS-1311-06

ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, and Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States government.

Corporate Headquarters San Jose, CA USAT: [email protected]

European Headquarters Geneva, SwitzerlandT: +41-22-799-56-40 [email protected]

Asia Pacific Headquarters SingaporeT: +65-6538-4700 [email protected]

Physical SpecificationsTransceivers • Brocade 10 Gbps Ethernet LC-style pluggable (SFP+), SR (850 nm) and

LR 10 km (1310 nm), hot-swappable• Brocade 10 Gbps Ethernet direct-attached active Twinax SFP+ copper

cable (1 m, 3 m, 5 m), hot-swappableForm factor Low-profile MD2 form factor PCI Express Card:

16.77 cm × 6.89 cm (6.60 in. × 2.71 in.)Bracket size Standard/full height: 1.84 cm × 12.08 cm (.73 in. × 4.76 in.)

Low profile: 1.84 cm × 8.01 cm (.73 in. × 3.15 in.)Distance support 26 meters at 10 Gbps on 62.5 µm multimode fiber

82 meters at 10 Gbps on 50 µm (OM2) multimode fiber300 meters at 10 Gbps on 50 µm (OM3) multimode fiber10 kilometers at 10 Gbps on 9 µm single mode fiber5 meters at 10 Gbps over active Twinax cable

Environment and Power RequirementsAirflow 45 Linear Feet/Minute (LFM)Operating temperature 0º C/32º F to 50º C/122º F (dry bulb)Non-operating temperature

–43º C/–40º F to 73º C/163º F (dry bulb)

Operating humidity 5% to 93% (relative, non-condensing)Non-operating humidity 5% to 95% (relative, non-condensing)Power dissipation 8.5 W Operating voltage 3.3 V

Agency ApprovalsUnited States CSA 60950-1-03 First Ed; ANSI C63.4; cCSAus; FCC Class BCanada UL60950-1, First Ed; ICES-003 Class B; cCSAusJapan CISPR22 Class B and JEIDA (Harmonics); VCCI-BEuropean Union EN60950-1; EN55022 Class B and EN55024; TUVBauart, CE MarkAustralia, New Zealand EN55022 and CISPR22 Class B or AS/NZS; CISPR22; C-TickRussia IEC60950-1; 51318.22-99 and .24-99; GOST MarkKorea KN22 and KN24; KCC Mark Class BTaiwan CNS 14336(94); CNS 13438(95) Class A; BSMI Mark

Warranty and SupportThree-year advanced replacement hardware warranty with 24×7×365 telephone/e-mail support and lifetime software updates

READY