Top Banner
WATER QUALITY AND WATER QUALITY AND TREATMENT OF WATERS TREATMENT OF WATERS How polluted is the water How polluted is the water from your home, from your home, river/creek, and sea river/creek, and sea water? water? Darrylynn Majied, Morningside HS and Montse Plascencia, Hamilton HS
20

Darrylynn & montse's research powerpoint

Oct 29, 2014

Download

Documents

darrylynnamir

 
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Darrylynn & montse's research powerpoint

WATER QUALITY AND WATER QUALITY AND TREATMENT OF TREATMENT OF

WATERSWATERSHow polluted is the water How polluted is the water

from your home, river/creek, from your home, river/creek, and sea water?and sea water?

Darrylynn Majied, Morningside HS

and

Montse Plascencia, Hamilton HS

Page 2: Darrylynn & montse's research powerpoint

IntroductionIntroduction

Our main objective is to analyze the water quality of four water samples: tap water, Stone Canyon Creek (UCLA), Alamo River and Red Hill (from Salton Sea).

Basic water quality of these samples is analyzed: alkalinity, hardness, nutrients, suspended solids, chloride and sulfate.

Coagulation/Flocculation was used to treat a mixture of Alamo River and Red Hill samples.

Page 3: Darrylynn & montse's research powerpoint

Alkalinity and HardnessAlkalinity and Hardness

• Alkalinity is the water capacity to resist change in pH Alkalinity is the water capacity to resist change in pH due to acid addition. It protects aquatic life against due to acid addition. It protects aquatic life against rapid pH changes. rapid pH changes.

• Hardness is caused by divalent cation e.g., calcium and magnesium.

• Hardness does not cause adverse health effect but hard water requires greater amount of soap to produce foam; it can also cause scaling in hot water pipes.

Page 4: Darrylynn & montse's research powerpoint

• Our results show tap water has the lowest alkalinity and hardness

• Alkalinity of Alamo River and Salton Sea was ~ 200 mg/L as CaCO3

• Salton Sea sample has the highest hardness, ~2300 mg/L as CaCO3

0 500 1000 1500 2000 2500

Tap water

S. Canyon Crk

Alamo River

Red Hill

mg/L as CaCO3

Alkalinity

Hardness

Page 5: Darrylynn & montse's research powerpoint

Nitrogen and PhosphorusNitrogen and Phosphorus

Nitrogen species analyzed: ammonia, nitrite and nitrate.

Phosphorus analyzed: ortho-Phosphate. Both nitrogen and phosphorus are nutrient that

stimulates plant growth; however, excessive amount of this nutrient result in an algae bloom, which can reduce dissolved oxygen in water and adversely affect aquatic life.

Page 6: Darrylynn & montse's research powerpoint

• Nitrate concentration was the much higher than ammonia and nitrite in all samples; an indication of pollution which occurred a while ago.

• Nitrate concentration in Red Hill exceeded 10 mg/L, limit set up US EPA.

• Ammonia and nitrite of all samples were less than 1 mg/L.

0 5 10 15 20

Tap water

S. Canyon Crk

Alamo River

Red Hill

mg/L

Nitrate-N

Nitrite-N

Ammonia-N

Page 7: Darrylynn & montse's research powerpoint

0 1 2 3 4 5

Tap water

S. Canyon Crk

Alamo River

Red Hill

mg/L

Phosphate-P

• Unlike nitrate, Alamo River has greater phosphate concentration(~ 4.5 mg/L) than other samples.

• High concentration of phosphate in Alamo River may be due to the fertilizer used by the farm land nearby.

• Same as nitrate, high concentration of phosphorus would promote algae growth and affect the aquatic life.

Page 8: Darrylynn & montse's research powerpoint

Nitrite experiment – Colorimetric method

Page 9: Darrylynn & montse's research powerpoint

Hardness experiment – EDTA titration method

To determine the hardness a titration with EDTA solution must be used.

When the titration begins the EDTA cancels out all the M2+, letting EBT, the indicator, free and causing the color change from burgundy to blue.

Page 10: Darrylynn & montse's research powerpoint

Suspended SolidsSuspended Solids

Suspended solids have a diameter greater than 2.5 um in size. Suspended solids can float and form unpleasant scum layers or sink and cause sediment buildup. High suspended solids can reduce aesthetic for recreational activities and visibility of waters.

Turbidity is measured when the sample’s light is blocked by large amounts of silt, microorganisms, plant fibers, sawdust, wood ashes, chemicals and coal dust. In other words, any substance that makes the water cloudy will cause turbidity.

Page 11: Darrylynn & montse's research powerpoint

0 100 200 300 400 500

Tap water

S. Canyon Crk

Alamo River

Red Hill

mg/L and NTU

Turbidity

TSS

• Alamo River has the highest concentration of suspended solids (~ 400 mg/L) and turbidity (~220 NTU), followed by Red Hill sample.

• Treated wastewater effluent is required to have 30 mg/L of suspended solids; indicates TSS in Alamo River and Red Hills need to be treated.

Page 12: Darrylynn & montse's research powerpoint

Total Suspended Solids experiment – Gravimetric methodCircular filter was used to contain the suspended solids from the water samples. Then they were measured to see which sample contained the most suspended solids.Creek contained the least amount of TSS with 4.25, Salton Sea contained 92.4 TSS, and Alamo River contained 397.35 TSS.

Page 13: Darrylynn & montse's research powerpoint

Sulfate and ChlorideSulfate and Chloride

Both sulfate and chloride ions are monitored in waters due to their effects on the taste (chloride) and odor (sulfate) in high concentration.

High concentration of sulfate ion can also cause scaling and corrosion in water pipes.

Hydrogen sulfide (“rotten-eggs smell”) is released under anaerobic (no oxygen) condition.

Page 14: Darrylynn & montse's research powerpoint

0 1000 2000 3000 4000 5000

Tap water

S. Canyon Crk

Alamo River

Red Hill

mg/L

Sulfate

Chloride

• Red Hill has the highest sulfate (2900 mg/L) and chloride (4700 mg/L) concentrations among the four samples.

• The sulfate and chloride concentrations of Alamo River is 1/10 and 1/20 of those of Red Hills, respectively.

• Both samples exceeded the sulfate and chloride limits set by US EPA, 250 mg/L.

Page 15: Darrylynn & montse's research powerpoint

Coagulation/ FlocculationCoagulation/ Flocculation

• Three major types of treatments: physical, chemical and biological can used to remove pollutants from waters.

• We used a chemical treatment (coagulation and flocculation) for this study.

• Coagulation and flocculation is a process that allow particles to react and grow in size; bigger floc will form due to an addition of a coagulant (e.g. aluminum sulfate) to the water.

• Aluminum sulfate (1 – 300 mg/L) was added to our samples (a mixture of Alamo River and Red Hill samples) and rapid mixed at 300 rpm for 1 min, slow mixed at 30 rpm for 15 min. After 30 min. settling, the turbidity of the water was measured.

Page 16: Darrylynn & montse's research powerpoint

Coagulation / Flocculation

Sample of Alamo River and Red Hill combined was placed into six large beakers, then different amounts of aluminum sulfate was added . Finally the stirring began, and the attraction of the TSS initiated.

Page 17: Darrylynn & montse's research powerpoint

Process of TSS combining.

Page 18: Darrylynn & montse's research powerpoint

The end results of coagulation.Observe both beakers, which one is more c lear.Therefore coagulation is a method of treatment, causing the water to be more pure.

Page 19: Darrylynn & montse's research powerpoint

ConclusionConclusion

Our results show the water quality of Alamo River and Red Hill from Salton Sea is more polluted than the tap water and Stone Canyon Creek.

Treatment is urgently needed to improve the water quality of these two water bodies.

Page 20: Darrylynn & montse's research powerpoint

Acknowledgements

UCLA Henry Samueli School of Engineering and Applied Science

UCLA Center of ????????? Dr. Sim Lin Lau, Civil and Environmental

Engineering Department