Custom Colour way U15604 - uflex.com.hk · U15604 Custom Colour way Flat Peak Customer reference: Cap colour: For custom colours, specify on Overview page

U15604Custom Colour way

Flat Peak

Customer reference:Cap colour:

For custom colours, specify on Overview page

O v e r v i e w

A

B

s e l e c t i o n

Below are elements to feature on your cap.Only one of each type may be chosen i.e. one sticker and one interior.Select an element by copying/moving the chosen element from this page to page 1 into its corresponding container.

BInterior

APeak sticker

FLAT

PEAK

FLAT

PEAK

FLAT

PEAK

FLAT

P

PATENT2010/16414

2,5 cm

3,5 cm

1 cm

2 cm

1,5 cm

0,4 cm

0,5 cm Stitch Allowance

Logo Text and Patent

Patent Number

p at e n t ta g

L o g o W o v e n l a b e l

W o v e n l a b e l s i z e

Note: 5 mm of the tag must be underneath the logo label and stitched in place prior to being stitched in the cap.

OS

13mm3.5mm

10mm

OS

Note: The size label is stitched on the side of the logo label.

Note: All thread is to be black in colour.

Note: Due to the small size of the text,the info on the reverse side needs to be printed, not woven.

For a custom label, place your logowithin the boundary box at a max sizeof 30mm x 16mm.

Note: Artwork needs to be evaluated toconfirm if suitable for the woven label.

30mm

20mm

OS

40mm

U15

501 WASH WITH CARE

DO NOT BLEACHDO NOT IRONDO NOT DRY CLEANDO NOT TUMBLE DRY

100% Cotton 100% Polyester Back

MADE IN CHINA | IMPORTER CODE: 20184077

protrudes 8mm

30mm

40mm

Standard label Custom label

I n t e r i o r i n f o r m at i o n

C u s t o m c o l o u r w ay i n f o

I n s t r u c t i o n s

When choosing a Custom Colour Way order, you are buying into your own choice of colour, fewer branding restrictions and selectable options for your peak sticker and interior.

If your requested colour is readily avaible on the market, your MOQ (minimum order quantity) will be 150 units - whereas if your requested colour must be made for you, your MOQ will be 3000 units.

Artwork used should be Vector (or of high resolution for more detailed designs).

Insert all intended elements on the Overview pageChoose from the Uflex elements on the Selection page and use them on the Overview page; and place your intended designs on the Overview page.

Recolour the cap angles on the Overview page to your desired colour scheme - if you choose colours that are not part of our standard range then please specify pantones of the colour so that we can quote accordingly.

Once you have completed this CAD, please submit this and a separate Artwork/Design file (with specified pantones and sizes) to:[email protected] and CC [email protected]

•

•

•

•

Correspondence is key - No progress will be made until confirmed in writing between both parties (Uflex and your primary contact person). Record will be kept of amendments made to the CAD for review should any queries arise.

We will advise and assist - However, you or your designer are responsible for ensuring that the supplied information and content is correct and of sufficient quality.

Elements that may not be removed:• Uflex Patent tag• Uflex Crown on right side of the cap• Washcare label• Metal Uflex button post (center of the inner of the cap)

P l e a s e n o t e

•

•

•