Creekside Millwork Brochure

Sapele Mahogany S.A. Mahogany Spanish Cedar White Oak Black Walnut Cherry

At Creekside Millwork, LLC, you could say we’re artists on a mission. Maybe a little selfish, too. Because we insist on putting as much pride into what we make as you’ll get out of it. That’s not only our professional responsibility, it’s what drives us individually.

Our small but talented team – representing more than 75 collective years of experience – is motivated by a desire to be creative and artis-tic. The beneficiary of our exacting attention to detail is you, whether designer, architect, or homeowner. Our pride of craftsmanship provides the quality you demand.

But instead of just believing what we’re telling, take a close look at what we’re showing you:

What makes a great first impression?Creekside Millwork made-to-order custom

exterior doors are crafted with hands-on el-egance and built for uncommon durability. Our solid hardwood stain-grade doors feature stave core stile with solid wood rails and cope and dowel construction.

Standard species include: • Sapele Mahogany• S.A. Mahogany• Spanish Cedar• White Oak Their structural integrity holds up to any

weather, and they’re termite-resistant as well. Stain grade doors are built with hand-sorted FAS Select or better lumber, while paint grade doors are manufactured with solid Mahogany stiles and rails. Doors are manufactured with stile and rail construction and floating panels.

Vertically aligned panels and interior stiles are cut from one single length board, for natural grain alignment. And we can match any profile you have – or you can choose from hundreds of existing profiles.

From the outside looking in, you’ll make a great and memorable first impression with custom exterior doors from Creekside Millwork.

Exterior DoorsGateway To Your Personal Space

Standard Exterior and Interior Wood Samples: Additional Interior Wood Samples:

A Grand Entrance to Every Room

Cherry Knotty Alder Knotty or Clear Pine Knotty White Oak Maple V.G. Douglas Fir White Ash

Interior doors, like every fixture in your home or office space, should make a special and permanent statement. Creekside Millwork interior doors reveal the careful attention to detail and personal responsibility that are the hallmark of our dedicated craftsmen.

• Wide variety of cope, molding and raised panel profiles

• Solid hardwood lumber• Superior finish sanding• Factory pre-finished• Custom designs• Custom Veneered panels, such as Crotch

Mahogany & Curly MapleStain Grade: AWI Speced engineered Stave

Core Stiles and solid, select FAS hardwood lumber. (There are no limitations on available lumber selections)

Paint Grade: Stiles and rails of solid Poplar. Panels are furniture-grade MDF.

Additional Interior Wood Samples:

Interior DoorsA Grand Entrance to Every Room

Make a statement – entering or exiting – with interior and exterior door quality from the superb craftsmen of Creekside Millwork, LLC.

Artists have great works – and then they have their masterpieces. Creekside Millwork’s artisans exhibit a special talent when the work calls for added flair. Fine custom wooden interiors limited only by your imagination are an area in which we take great pride.

Maybe it’s custom wall paneling…dec-orative moldings, transoms, and wainscot-ting…distinctive entranceway sidelights, one-of-a-kind archways…rustic flooring…

curvaceous cornices…virtually any design solution that calls for a uniquely individual touch. Whatever you can fantasize, we can customize – with the personal commitment to studio-quality artistry that sets us apart from the pack. Quality consistent with Architectural Woodworking Institute (AWI) standards!

ArchitecturalWoodworkingAccents to Emphasize the Style That’s Yours

For the Final Touches You Have in Mind

See for yourself how our wide selection of profiles and elevations will add beauty, elegance, and a signature style to all your entrances and exits!

Door Elevations

Flexible Configurations To Match Your Personal Design Sense

Profiles & ElevationsCope Profiles Raise Profiles Mutin Profiles

Floating raised or flat panels

Cope Profile

Raise Profile

The configurations on this page are only a sampling of the choices available. Contact us for additional designs or custom choices.

A #1

B #2

C #3

D #4

E #5

F #6

#7

#8

#9

#10

7/8” BEAD

7/8” OGEE

1-1/8” OGEE

1” OGEE

1” BEAD

1” BEVEL

Custom Furniture& Cabinetry

For the Final Touches You Have in Mind

Do your tastes run toward the ornate? Unconventional? Smartly stream-lined? Casually contemporary? Classically elegant? Whatever captures the feeling you wish to express – it may differ from room to room – Creekside Millwork can provide the custom furniture and cabinetry that will have you declaring, “Yes, that’s precisely what I had in mind!”

“Premium Products at their Finest”

Creekside Millwork, LLC7380 Route 98

Arcade, NY 14009

Phone: (585) 492-4004Fax: (585) [email protected]