Concertina Racking Swing Racking Free Fall Racks storage and rackin… · Concertina Racking Swing Racking Free Fall Racks Auto Crane Storage Racks Bulk Case Racks Harp Racks Toaster

Concertina Racking

Swing Racking

Free Fall Racks

Auto Crane Storage Racks

Bulk Case Racks

Harp Racks

Toaster Racks

Off-Cut Racks

Aluminium Vertical Racks

GLASS STORAGE AND RACKING SOLUTIONS

-

CONCERTINA RACKING FEATURES

Metalcrafts bulk glass storage concertina racking systems are fully self contained, which means there are no requirements for extra floor runners and strengthening.

Case storage and selection is one of the strengths of this concertina racking system, with a large 350mm ledge two full cases can be stored on each leaf. Case selection is as easy as winding the rack along to the required case.

This is bulk storage at its best! Up to 6 tons of packed glass can be stored safely, and with load retention arms in place, rack movement is made with ease for quick selection of product.Each system has a 800mm unloading space for crane access.

GET FULL PRODUCT CATALOGUES ONLINE AT WWW.METALCRAFT.CO.NZ

-

3.2M x 1.8M BULK CONCERTINA RACKING

Product Code –32182CONRACK

3140mm x 1840mm and smaller concertina racking is an easy way to free up space.

We can design these racks to suit your space and needs.

Shown here is a 10 bay 300mm ledge system, using 6M x 3.3M of floor space x 1.9M high.


-

3.2M x 1.8M 450MM LEDGE CONCERTINA RACK

3140mm x 1840mm and smaller concertina racking is a very easy way to free up space.


Shown here is a 15 bay / 450mm ledge system, using 9M x 3.3Mof floor space x 1.9m high.

Product Code –321845CONRACK


-

10 BAY 4M x 2.5M CONCERTINA RACK

Product Code –42510BAYCONRACK

10 Bay 4M x 2.5M

3660mm x 2440mm and larger concertina racking is a very easy way to store your standard stock sheets.

Shown here is a 10 bay / 300mm ledge system, using 6M x 3.9M of floor space x 3.5mhigh.

Holding 5.5 ton per bay.


-



15 Bay 4M x 2.5M


Shown here is a 15 bay / 300mm ledge system, using 9M x 3.9M of floor space x 3.5M high.



-

15 BAY MIXED CONCERTINA RACK SYSTEM

Product Code –15BAYMIXEDCONRACK

15 Bay mixed racking system.

The concertina racking shown here is a 15 bay/ 300mm ledge mixed system, whichallows for both obscure and 3660 mm x 2440mm sheet storage using 9M x 3.9M

of floor space x 3.5M high.

Holding upto 5.5 ton per bay.


-



17 Bay 4M x 2.5M





-



20 Bay 4M x 2.5M





-



25 Bay 4M x 2.5M





-



30 Bay 4M x 2.5M


Shown here is a 30 bay / 300mm ledge system, using 9M x 9M of floor space x 3.5M high.



-



38 Bay 4M x 2.5M





-

12 BAY 5.2M x 3.3M CONCERTINA RACK


5200mm x 3160mm concertina racking is an easy way to store your Jumbo stock sheets.

Shown here is a 12 bay / 350mm ledge system, using 12M x 5.5M of floor space x 4M high.

Holding 15 ton per bay.


SWING RACKING FEATURES

Metalcraft swing racks are an effective use of floor space for glass storage. Swing racks are designed and manufactured to suit your needs and available floor space.

Swing racks can also be used for packed glass storage and can hold up to 2.5 tons per leaf.

Swing racks allow for easy access and with limited moving parts, maintenance costs are very low. Swing racks play a very important part in factory glass storage.


-

3M x 2M x 300MM LEDGE SWING RACK

Product Code –32300SWING

3M Long Leaf x 2M high with a 300mm ledge.

Swing Racking is a very easy way to free up space.


As shown here is a 10 bay / 300mm ledge system, using 4M x 3M of floor space x 2.3M high.


-

3M x 2.7M x 350MM LEDGE SWING RACK


3M Long Leaf x 2.7M high with a 350mm ledge.

Swing racking is a very easy way to free up space.


As shown here is a 22 bay / 350mm ledge system, using 12M x 3M of floor space x 3M high.


-

4M x 2.5M x 200MM LEDGE SWING RACK


4M Long Leaf x 2.5M high with a 200mm ledge.

Swing racking is a very easy way to free up space.


As shown here is part of a 10 bay / 200mm ledge system, using 3.2M x 4.2M of floor space x 2.8M high.


-

1.8M x 1.2M FREE FALL RACKS

Product Code –1812FREEFALL

Shown here are our small free fall load racks.

Suitable for sheet sizes up to 3300mm x 1900mm.

These free fall racks are available in full kitset form and can be supplied in a colour to suit your company branding.


-



Shown here are our mid size free fall load racks.

suitable for sheet sizes up to 3700mm x 2400mm.

These free fall racks come complete with pack lifter loading slots.

These free fall racks are available in full kit set formand can be supplied in a colour to suit your company branding.


-

4M x 3M FREE FALL RACKS


Shown here are our midsize free fall load racks.

Suitable for sheet sizes up to 3700mm x 2900mm.

They come complete with pack lifter loading slots.

These free fall racks are available in full kitset form and can be suppliedin a colour to suit your company branding.

Shown here is the upper walkway option.


-



Shown here are our large free fall load racks.

suitable for sheet sizes up to 5300mm x 3400mm.

They come complete with pack lifter loading slots.

These free fall racks are available in full kit set formand can be supplied in a colour to suit your company branding.

Shown here is the upper walkway option.


-

BULK AUTO CRANE LOAD STORAGE RACKS

Product Code –43AFRAMECRANELOAD

Shown here are A -Frame Floor racks.

Crane load storage racks are designed to suit your floor space and the auto loader.

Metalcraft will work with your auto loader supplier to design the correct racks for your needs.


-

BULK CRANE LOADER L – FRAME

Product Code –43LFRAMECRANELOAD

Shown here are L-Frame floor racks.

Auto loader floor racks are designed to suit your floor space and the auto loader.



-

GLASS CRANE LOADER L-FRAME

Product Code –535LFRAMECRANELOAD

Shown here are Jumbo L-Frame floor racks.

Designed for 5200mm x 3300mm Glass sheets.

Auto Loader floor racks are designed to suit your floor space and the auto loader.



-

BULK DGU HARP RACK

Product Code –100SLOTBULKHARP

This 100 Slot complete Double Glaze unit harp rack, has 26mm slots to allow you to store your finished units.

Harp racks allow for easy selection.

These floor mounted racks are designed and built to suit your floor areastorage requirements.


-

BULK LEANER RACKS

Product Code –CASELEARNERS

Bulk case leaner racks are designed to suit your required needs and space.

Shown here are 2140mm x 1840mm cases stored against a series of three leaners.


-

BULK CASE FLOOR RACKS

Product Code –CASEFLOORRACK

Bulk case floor racks are designed to suit your required needs and space.

This floor mounted sliding bulk storage system allows for multiple cases to be stored safely and compactly.

This system is a combination of vertical supports and floor beams, which allows the vertical supports to be positioned as required to suit the case sizes.


-

OBSCURE TOASTER RACKS

Product Code –OBSCURETOASTRACK

Obscure toaster racks are designed to suit your required needs and space.

Shown here is a 1.8M high 2M deep x 300mm slot toast rack.

These racks are a cost effective way to store and access your smaller and mid size sheets of product.


-

END CAP TOASTER RACKS

Product Code –ENDCAPTOASTRACK

Case toaster racks are designed to suit your required needs and space.

Shown here is a 1.8M high 2M deep x 300mm slot toast rack.

Simple effective storage of smaller and mid size cases.

These toaster racks are designed and built to suit your needs and floor space.


-

OFF CUT RACKS

Product Code –22OFFCUTRACK

Off cut racks are designed to suit your required needs and space.

Shown here is a 2.2M high 1.8M deep x 300mm slot storage rack.

Metalcraft can design many styles of off-cut racks to help you maximise your return on your off-cuts.


-

4M x 6M ALUMINIUM VERTICAL RACK

Product Code –46ALUMINIUMRACK

Vertical aluminium length storage systems are designed to suit your requirements.

Shown here is a wall mounted 4M wide x 6M high system.

These racks can be made double sided and free standing. They feature Metalcraft’sown non marking rubber and foam coated support fingers.

These can be supplied in a full kit set to allow for self installation.


METALCRAFT ENGINEERING CO LTD

500a WAIRAKEI ROAD, CHRISTCHURCH, PO BOX 5134, PAPANUI, NEW ZEALAND

Free call within NZ 0508 323 373 + 64 33 60 33 73 (ph) + 64 360 3374 (fax)

Email: [email protected] www.metalcraft.co.nz

GLASS TRANSPORTATION

CUTTING & PROCESSING TABLES

GLASS ONSITE HANDLING PRODUCTS

CRANES & GLASS LIFTING

GLASS FACTORY HANDLING SOLUTIONS

GLASS PRODUCT DISPLAY SYSTEMS

OUR OTHER PRODUCTS

WE ALSO OFFER A FULL 3D CAD DESIGN PROCESS SPECIALISING IN CUSTOM

DESIGNS TO MEET YOUR GLASS RACKING AND STORAGE NEEDS.

Concertina Racking Swing Racking Free Fall Racks storage and rackin… · Concertina Racking Swing Racking Free Fall Racks Auto Crane Storage Racks Bulk Case Racks Harp Racks Toaster

Documents