Top Banner
96

clevo l295n l297n.pdf

Jan 04, 2017

Download

Documents

trinhtu
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • PrefacePreface

    LCD Computer

    L295N/L297N Series

    Service Manual

    I

  • PrefacePr

    efac

    e

    NoticeThe company reserves the right to revise this publication or to change its contents without notice. Information containedherein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven-dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor arethey in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

    This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted orreduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica-tion, except for copies kept by the user for backup purposes.

    Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks oftheir respective companies. They are mentioned for identification purposes only and are not intended as an endorsementof that product or its manufacturer.

    Version 1.0October 2006

    TrademarksIntel, Celeron and Intel Core are registered trademarks of Intel Corporation.Windows is a registered trademark of Microsoft Corporation.Other brand and product names are trademarks and/or registered trademarks of their respective companies.

    II

  • PrefacePreface

    About this ManualThis manual is intended for service personnel who have completed sufficient training to undertake the maintenance andinspection of personal computers.

    It is organized to allow you to look up basic information for servicing and/or upgrading components of the L295N/L297N computer.

    The following information is included:

    Chapter 1, Introduction, provides general information about the location of system elements and their specifications.Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgradeelements of the system.Appendix A, Part ListsAppendix B, Schematic Diagrams

    III

  • PrefacePr

    efac

    e

    Related DocumentsYou may also need to consult the following manual for additional information:

    Users Manual on CDThis describes the computers features and the procedures for operating the computer and its ROM-based setup program.It also describes the installation and operation of the utility programs provided with the computer.

    IV

  • PrefacePreface

    ContentsIntroduction ..............................................1-1Overview .........................................................................................1-1System Specifications .....................................................................1-2External Locator - Front View ........................................................1-5External Location - Left & Right Side Views .................................1-6External Locator - Rear View .........................................................1-7Mainboard Overview - Top (Key Parts) .........................................1-8Mainboard Overview - Bottom (Key Parts) ....................................1-9Mainboard Overview - Top (Cable Connectors & Switches) .......1-10Mainboard Overview - Bottom (Cable Connectors & Switches) .1-11Disassembly ...............................................2-1Overview .........................................................................................2-1Maintenance Tools ..........................................................................2-2Connections .....................................................................................2-2Maintenance Precautions .................................................................2-3Disassembly Steps ...........................................................................2-4Removing the Hard Disk Drive Assembly ......................................2-5Removing the LCD Back Cover .....................................................2-6Removing the System Memory .......................................................2-7Removing and Installing the Processor ...........................................2-8Removing the Modem ...................................................................2-11Removing the Wireless LAN Module ...........................................2-12Removing the Bluetooth Module ..................................................2-13Removing the Floppy Disk Drive Assembly ................................2-14Removing the Optical Device Assembly ......................................2-15Part Lists ..................................................A-1Part List Illustration Location ........................................................A-2L295N - Base .................................................................................A-3L295N - Bracket (AU) ...................................................................A-4

    L295N - Front ................................................................................ A-5L295N - Front - Touch Screen ....................................................... A-6L295N - Combo Drive ................................................................... A-7L295N - DVD-RW Drive .............................................................. A-8L295N - FDD ................................................................................. A-9L295N - HDD .............................................................................. A-10L297N - Base ............................................................................... A-11L297N - Bracket (Chi-Mei) ......................................................... A-12L297N - Bracket - TouchScreen (AU) ........................................ A-13L297N - Bracket - TouchScreen (Chi-Mei) ................................. A-14L297N - Front .............................................................................. A-15L297N - Combo Drive ................................................................. A-16L297N - DVD-RW Drive ............................................................ A-17L297N - FDD ............................................................................... A-18L297N - HDD .............................................................................. A-19Schematic Diagrams.................................B-1System Block Diagram ...................................................................B-2Clock Generator ..............................................................................B-3Yonah CPU - 1 of 2 ........................................................................B-4Yonah CPU - 2 of 2 ........................................................................B-5Calistoga 1/5 Host ...........................................................................B-6Calistoga 2/5 ...................................................................................B-7Calistoga 3/5 DDR ..........................................................................B-8Calistoga 4/5 ...................................................................................B-9Calistoga 5/5 POWER ..................................................................B-10DDRII RIMM ...............................................................................B-11Chrontel CH7308 ..........................................................................B-12LCD Connector .............................................................................B-13VGA Interface ...............................................................................B-14ICH7-M 1/4 (SATA) ....................................................................B-15

    V

  • PrefacePr

    efac

    e

    ICH7-M 2/4 (PCI, USB) .............................................................. B-16ICH7-M 3/4 (FWH) ..................................................................... B-17ICH7-M 4/4 .................................................................................. B-18CD-ROM, Ext USB, Mini PCI ..................................................... B-19MDC, Mini Card, USB2.0, BT .................................................... B-20LAN RTL8110SBL ...................................................................... B-21TI PCI7412 ................................................................................... B-22PCM Socket, 3-in-1 Socket .......................................................... B-23Azalia CODEC ALC883 & MDC ................................................ B-24H8 ................................................................................................. B-25COM Port, Fan, Parallel Port ....................................................... B-26Super I/O PC87392, FDD ............................................................ B-27VDD3, VDD5, 3.3V, 5V .............................................................. B-281.5VS, 1.05VS, 2.5VS .................................................................. B-29AC-IN, 1.8V, 0.9VS ..................................................................... B-30VCORE ........................................................................................ B-3112VS ............................................................................................. B-32Button Board for L295N .............................................................. B-33Button Board for L297N .............................................................. B-34CD-ROM Board for L295N ......................................................... B-35CD-ROM Board for L297N ......................................................... B-36USB Board ................................................................................... B-37CardReader Board ........................................................................ B-38Screw Hole ................................................................................... B-39

    VI

  • Introduction1.Introduction

    1: IntroductionOverviewThis manual covers the information you need to service or upgrade the L295N/L297N LCD computer. Information aboutoperating the computer (e.g. getting started, and the Setup utility) is in the Users Manual. Information about drivers (e.g.VGA & audio) is also found in Users Manual. That manual is shipped with the computer.

    Operating systems (e.g. DOS, Windows 9x, Windows NT 4.0, Windows 2000, Windows XP, OS/2 Warp, UNIX, etc.) havetheir own manuals as do application software (e.g. word processing and database programs). If you have questions aboutthose programs, you should consult those manuals.

    The L295N/L297N LCD computer is designed to be upgradeable. See Disassembly on page 2 - 1 for a detailed de-scription of the upgrade procedures for each specific component. Please note the warning and safety information indi-cated by the symbol.

    The balance of this chapter reviews the computers technical specifications and features.

    Overview 1 - 1

  • Introduction1.

    Intr

    oduc

    tion

    System Specifications

    Feature Specification

    Processor Types Intel Core 2 Duo Processor(478-pin) Micro-FC-PGA PackageT7200/ T7400/ T7600

    65nm (65 Nanometer) Process Technology4MB On-die L2 Cache & 667MHz FSB2.0/ 2.16/ 2.33 GHz

    Intel Core 2 Duo Processor(478-pin) Micro-FC-PGA PackageT5500/ T5600

    65nm (65 Nanometer) Process Technology2MB On-die L2 Cache & 667MHz FSB1.66/ 1.83 GHz

    Intel Core Duo Processor(478-pin) Micro-FC-PGA PackageT2300/ T2400/ T2500/ T2600/ T2700

    65nm (65 Nanometer) Process Technology2MB On-die L2 Cache & 667MHz FSB1.66/ 1.83/ 2.0/ 2.16/ 2.33 GHz

    Intel Core Solo Processor(478-pin) Micro-FC-PGA PackageT1300/ T1400

    65nm (65 Nanometer) Process Technology2MB On-die L2 Cache & 667MHz FSB1.66/ 1.83 GHz

    Intel Celeron M Processor(478-pin) Micro-FCPGA Package410/ 420/ 430/ 440/ 450

    65nm (65 Nanometer) Process Technology1MB On-die L2 Cache & 533MHz FSB1.46/ 1.60/ 1.73/ 1.86/ 2.0 GHz

    Core Logic Intel 945GM + ICH7-M

    Latest Specification Information

    The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/speedsand CD/DVD device types) may be changed or updated due to the manufacturer's release schedule. Check with your service center fordetails.

    Table 1 - 1System

    Specifications

    1 - 2 System Specifications

  • Introduction1.Introduction

    LCD L295N15.0" XGA Anti-Glare Type Flat Panel TFT (1024*768)Touch Panel (Factory Option)Hard Glass (Factory Option)

    L297N17.0" SXGA Anti-Glare Type Flat Panel TFT (1280*1024)Touch Panel (Factory Option)Hard Glass (Factory Option)

    Security Security (Kensington Type) Lock Slot BIOS Password

    Memory Two 200 Pin SO-DIMM Sockets Supporting DDRII (DDR2) 533/667 MHz64-bit Wide DDRII (DDR2) Data ChannelsMemory Expandable up to 2GB (256/ 512/ 1024 MB DDRII Modules)(Note: Do Not Use Other Module Types)

    Video Controller Intel 945GM IntegrationIntel Graphics Media Accelerator 950 (Intel GMA 950)Dynamic Video Memory Technology DVMT - Supports up to 224MB of Video Memory (dynamically allocated from system memory where needed)

    BIOS 4MB Flash ROM Phoenix BIOS

    Storage One 3.5, 25.4mm (h) Hard Disk (HDD) with SATA (Serial) InterfaceOne 3.5", 1.44MB 3-Mode Floppy Disk Drive One changeable 12.7mm(h) Optical Device (CD/DVD) Type Drive (see Optional on page 1 - 4 for drive options)

    Audio Intel AZALIA High Definition Audio Interface3D Stereo Enhanced Sound SystemSound-Blaster PRO Compatible

    2 * Built-In SpeakersBuilt-In Microphone, Line-In & Headphone Jacks

    Keyboard Multi-language External Keyboard (Option)

    PC Card Sockets Supports One Type II PCMCIA Slot (Cardbus Support)

    Card Reader Embedded 7-in-1 Card Reader (SD/ MMC/ MS/ MS PRO/ MS Duo/ Mini SD/ RSMMC)

    Interface One Serial PortOne Parallel PortOne External Monitor PortOne Headphone-Out JackOne Microphone-In JackOne Line-In Jack

    Four USB 2.0 PortsOne RJ-45 Jack for LANOne RJ-11 Jack for ModemOne AC-In JackOne IEEE 1394a Port (Un-Powered)

    Feature Specification

    System Specifications 1 - 3

  • Introduction1.

    Intr

    oduc

    tion

    Communication 1GB PCIe Ethernet LANMDC 56K Fax Modem - V.90 & V.92 Compliant Intel PRO/Wireless 3945ABG PCIe Interface Wireless LAN Module (Optional)802.11 b/g Wireless LAN Module (Optional)USB (2.0) Bluetooth Module (Factory Option)

    Power Management

    Supports ACPI 2.0 Supports Wake On Modem RingSupports Wake On LAN

    Power Full Range - 90W Built-in AC adapter

    Environmental Spec

    TemperatureOperating: 5C ~ 35CNon-Operating: -20C ~ 60C

    Relative HumidityOperating: 20% ~ 80%Non-Operating: 10% ~ 90%

    Dimensions & Weight

    L295N369mm (W) * 188mm (D) * 384mm (H)8.2Kg+/- 5% With Touch Screen7.9Kg+/- 5% Without Touch ScreenTilt (0-15 deg), Swivel (270 deg)

    L297N395mm (W) * 179mm (D) * 418mm (H)10.1Kg+/- 5% With Touch Screen9.8Kg+/- 5% Without Touch ScreenTilt (0-15 deg), Swivel (270 deg)

    Optional Optical Drive Module Options:Combo Drive ModuleDVD-Dual Drive ModuleDVD Super Multi Drive Module

    Touch Panel (Factory Option)

    Hard Glass (Factory Option)

    Intel PRO/Wireless 3945ABG PCIe Interface Wireless LAN Module

    802.11 b/g Wireless LAN Module

    USB (2.0) Bluetooth Module (Factory Option)

    Feature Specification

    1 - 4 System Specifications

  • Introduction1.Introduction

    External Locator - Front View

    1

    24

    23

    43

    1

    2

    4

    2

    3

    43

    5

    66

    L295N L297N

    Figure 1 - 1Front View

    1. LCD Panel2. Speakers3. LED Activity

    indicators4. Power Button5. Optical (CD/

    DVD) Device Bay (L297N only)

    6. Keyboard Holder (L297N only)

    External Locator - Front View 1 - 5

  • Introduction1.

    Intr

    oduc

    tion

    External Location - Left & Right Side ViewsFigure 1 - 2Left & Right Views

    1. Floppy Disk Drive*

    2. Vent3. Hard Disk Drive

    (HDD) Bay4. CD Device

    (L295N only)5. LCD Brightness

    Control Knob6. Volume Control

    Knob7. Dual PC Card

    Slots 8. PC Card Eject

    Buttons9. 7-in-1 Card

    Reader10. 2* USB Ports11. AC Power-In Port12. Security Lock

    Slot

    2

    8

    7

    3

    1 1

    25

    6

    9

    2

    1110

    L295N L297N L295N L297N

    2

    3

    4

    5

    6

    12

    8

    7 9

    1110

    12

    Left Right

    1 - 6 External Location - Left & Right Side Views

  • Introduction1.Introduction

    External Locator - Rear View Figure 1 - 3Rear View

    1. Carrying Handle2. Headphone-Out

    Jack3. Line-In Jack4. Microphone-In

    Jack5. RJ-45 LAN Jack6. RJ-11 Phone

    Jack7. 2* USB Ports8. Unpowered -

    IEEE 1394 Port9. Printer/Parallel

    Port10. Serial Port11. External Monitor

    Port12. Vents13. Hard Disk Bay

    Screw

    1

    4 5 6

    12

    2 3 87

    12

    10 11

    13

    12 12

    9

    11212

    12

    12 12

    L295N L297N

    1313

    External Locator - Rear View 1 - 7

  • Introduction1.

    Intr

    oduc

    tion

    Mainboard Overview - Top (Key Parts)

    Figure 1 - 4Mainboard Over-

    view - Top Key Parts

    1. CPU Socket (no CPU Installed)

    2. Intel 945GM (North Bridge)

    3. RAM Sockets4. Mini Card

    Socket for WLAN

    5. FLASH BIOS6. CMOS Battery7. Cardbus

    PCI7412

    56

    7

    4 1

    3

    2

    1 - 8 Mainboard Overview - Top (Key Parts)

  • Introduction1.Introduction

    Mainboard Overview - Bottom (Key Parts) Figure 1 - 5Mainboard Over-

    view - Bottom Key Parts

    1. Chrontel CH73082. Clock Generator3. Intel ICH7-M 652

    mBGA (South Bridge)

    4. SUPER I/O Winbond PC87392

    5. AZALIA MDC Module

    4 53

    1

    2

    Mainboard Overview - Bottom (Key Parts) 1 - 9

  • Introduction1.

    Intr

    oduc

    tion

    Mainboard Overview - Top (Cable Connectors & Switches)

    1

    234

    5

    6

    7

    8 9

    10

    11 12

    13

    1415

    17

    16

    Figure 1 - 6Mainboard Top

    Cable Connectors & Switches

    1. CD/DVD Device (CN7)

    2. Floppy Disk Drive (CN5)

    3. CN35 (LCD Connector)

    4. Inverter (CN1)5. BT Module 6. Modem Module7. Card Reader8. Speaker (CN31)9. Modem Cable

    (CN33)10. PC CARD (CN13)11. Touch Screen

    (CN16) 12. IEEE1394 (CN36)13. USB 2.0 (CN17)14. LED Board

    (CN30)15. Speaker (CN32)16. Power (CN12)17. Fan Power (CN9)

    1 - 10 Mainboard Overview - Top (Cable Connectors & Switches)

  • Introduction1.Introduction

    Mainboard Overview - Bottom (Cable Connectors & Switches)

    1

    Figure 1 - 7Mainboard Bottom

    Cable Connectors & Switches

    Mainboard Overview - Bottom (Cable Connectors & Switches) 1 - 11

  • Introduction1.

    Intr

    oduc

    tion

    1 - 12

  • Disassembly2.D

    isassembly

    2: DisassemblyOverview

    This chapter provides step-by-step instructions for disassembling parts and subsystems. When it comes to reassembly,reverse the procedures (unless otherwise indicated).

    We suggest you completely review any procedure before you take the computer apart.

    Procedures such as upgrading/replacing the RAM, CD device and hard disk are included in the Users Manual but arerepeated here for your convenience.

    To make the disassembly process easier each section may have a box in the page margin. Information contained underthe figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the dis-assembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previ-ous disassembly procedure. The amount of screws you should be left with will be listed here also.

    A box with a will provide any possible helpful information. A box with a contains warnings.

    An example of these types of boxes are shown in the sidebar.

    Information and Component Parts

    Warning

    Overview 2 - 1

  • Disassembly2.

    Dis

    asse

    mbl

    y

    NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply,and that all peripheral cables are disconnected (including telephone lines and network cables).

    Maintenance ToolsThe following tools are recommended when working on the computer:

    M3 Philips-head screwdriver M2.5 Philips-head screwdriver (magnetized) M2 Philips-head screwdriver Small flat-head screwdriver Pair of needle-nose pliers Anti-static wrist-strap

    ConnectionsConnections within the computer are one of four types:

    Locking collar sockets for ribbon connectors To release these connectors, use a small flat-head screwdriver to gently pry thelocking collar away from its base. When replacing the connection, make surethe connector is oriented in the same way. The pin1 side is usually not indicat-ed.

    Pressure sockets for multi-wire connectors To release this connector type, grasp it at its head and gently rock it from sideto side as you pull it out. Do not pull on the wires themselves. When replacingthe connection, do not try to force it. The socket only fits one way.

    Pressure sockets for ribbon connectors To release these connectors, use a small pair of needle-nose pliers to gently liftthe connector away from its socket. When replacing the connection, make surethe connector is oriented in the same way. The pin1 side is usually not indicat-ed.

    Board-to-board or multi-pin sockets To separate the boards, gently rock them from side to side as you pull themapart. If the connection is very tight, use a small flat-head screwdriver - usejust enough force to start.

    2 - 2 Overview

  • Disassembly2.D

    isassembly

    Maintenance PrecautionsThe following precautions are a reminder. To avoid personal injury or damage to the computer while performing a re-moval and/or replacement job, take the following precautions:

    1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other components could be damaged.

    2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight.3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong mag-

    netic fields. These can hinder proper performance and damage components and/or data. You should also monitor the position of magnetized tools (i.e. screwdrivers).

    4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.

    5. Be careful with power. Avoid accidental shocks, discharges or explosions.Before removing or servicing any part from the computer, turn the computer off and detach any power supplies.When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire.

    6. Peripherals Turn off and detach any peripherals.7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity.

    Before handling any part in the computer, discharge any static electricity inside the computer. When handling a printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that you use an anti-static wrist strap instead.

    8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands pro-duce oils which can attract corrosive elements.

    9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted to charged surfaces, reducing performance.

    10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as screws, loose inside the computer.

    CleaningDo not apply cleaner directly to the computer, use a soft clean cloth.Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.

    Power Safety Warning

    Before you undertakeany upgrade proce-dures, make sure thatyou have turned offthe power, and dis-connected all periph-erals and cables(including telephonelines). It is advisableto also remove yourbattery in order to pre-vent accidentally turn-ing the machine on.

    Overview 2 - 3

  • Disassembly2.

    Dis

    asse

    mbl

    y

    Disassembly StepsThe following lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THEDISASSEMBLY STEPS IN THE ORDER INDICATED.

    To remove the hard disk drive assembly:1. Remove the hard disk drive assembly page 2 - 5

    To remove the LCD back cover:1. Remove the LCD back cover page 2 - 6

    To remove the system memory:1. Remove the LCD back cover page 2 - 62. Remove the system memory page 2 - 7

    To remove and install the Processor:1. Remove the LCD back cover page 2 - 62. Remove the processor page 2 - 83. Install the processor page 2 - 10

    To remove the modem:1. Remove the LCD back cover page 2 - 62. Remove the modem page 2 - 11

    To remove the WLAN module:1. Remove the LCD back cover page 2 - 62. Remove the WLAN module page 2 - 12

    To remove the Bluetooth module:1. Remove the LCD back cover page 2 - 62. Remove the bluetooth module page 2 - 13

    To remove the floppy disk drive assembly:1. Remove the LCD back cover page 2 - 62. Remove the floppy disk drive assembly page 2 - 14

    To remove the Optical Device:1. Remove the LCD back cover page 2 - 62. Remove the optical device page 2 - 15

    2 - 4 Disassembly Steps

  • Disassembly2.D

    isassembly

    Removing the Hard Disk Drive Assembly1. Unplug the power cord and disconnect all peripheral cables (including the phone line) from the computer.2. Turn OFF the computer and turn it around so that you may comfortably access the left side.3. Remove screw from the HDD Bay .4. Carefully pull the HDD assembly out from the bay and disconnect cables & .5. Remove screws - and separate the hard disk and case .6. Insert the new hard disk, and reverse the removal procedure to install the new hard disk.

    Figure 2 - 1 Hard Disk Removal

    Sequence

    a. Remove the screwfrom the HDD Bay.

    b. Slide the HDD assem-bly in the direction ofthe arrow and discon-nect the cables.

    c. Remove the screwsand separate the HDDfrom the case.

    2. HDD Bay Cover9. HDD10. HDD case

    5 Screws

    1 23 4

    5 8 9 10

    1

    2

    3

    4

    a.

    b. c.

    5 6

    7

    9 10

    8

    Removing the Hard Disk Drive Assembly 2 - 5

  • Disassembly2.

    Dis

    asse

    mbl

    y

    Removing the LCD Back Cover1. Unplug the power cord and disconnect all peripheral cables (including the phone line) from the computer.2. Turn OFF the computer and place it with its LCD display facing down on a clean, dry, level surface.3. Remove screws - from the LCD back cover and slide it up towards the top of the computer.4. Carefully remove the LCD back cover from the main unit and set it aside.

    Figure 2 - 2 LCD Back Cover

    Removal Sequence

    a. Remove the screwsfrom the LCD backcover.

    b. Lift the cover out andset it aside.

    1 1112

    12. LCD back cover

    11 Screws

    a.

    1 2 3 4

    6

    5

    79

    810

    11

    b.

    12

    12

    L295N

    L297N

    Card Reader/PC Card Slots

    Make sure you removeany cards or covers inthe 7-in-1 Card Readerand PC Card slot be-fore removing the rearcase cover.

    2 - 6 Removing the LCD Back Cover

  • Disassembly2.D

    isassembly

    Removing the System Memory1. Remove the LCD back cover (page 2 - 6).2. The memory sockets will be visible at point on the mainboard.3. For each module you want to replace, gently push the latches and toward the sides of the socket to release the

    module. Push the latches to release the second module if necessary.4. The module will pop-up, and you can remove it.5. Insert the new module. The module will only fit one way as defined by the pin alignment.6. Make sure the module is seated as far into the slot as it will go (DO NOT FORCE IT). The latches will click into

    place on the sides of the module. Make sure they are secure.7. Reverse the procedures to put the computer back together, and do not forget all the screws. When you restart the

    computer the new memory configuration should be registered.8. If the system doesnt properly detect the new memory, and you are sure they are properly seated, you may

    need to run the Setup utility.

    Figure 2 - 3 Memory Removal

    Sequence

    a. Locate the memorysockets.

    b. Pull the latch(es) onthe memory sockets torelease the module(s)and lift it (them) out.

    c. Insert a new module.

    4. Memory module(s)

    12 3

    4

    Contact Warning

    Be careful not to touchthe metal pins on themodules connectingedge. Even the clean-est hands have oilswhich can attract parti-cles, and degrade themodules perfor-mance.

    c.

    a.

    2

    b.

    3

    4

    1

    2 3

    4

    1

    L295N

    L297N

    Removing the System Memory 2 - 7

  • Disassembly2.

    Dis

    asse

    mbl

    y

    Removing and Installing the ProcessorProcessor Removal Procedure1. Remove the LCD back cover (page 2 - 6).2. Remove screws - from the CPU heat sink fan unit (in the order indicated in Figure 2 - 5a).3. Disconnect the fan power cable from the mainboard and lift out the CPU heat sink fan unit .

    Figure 2 - 4 Processor Removal

    Sequence

    a. Remove the screwsfrom the CPU heatsink and fan unit.

    b. Release the power ca-ble and lift the heatsink & fan unit out.

    1 34 5

    2

    1

    a.

    4

    3

    b.

    5

    4

    5. Heat Sink & Fan

    3 Screws

    Caution

    The heat sink, andCPU area in general,contains parts whichare subject to hightemperatures - Pleaseallow the area time tocool before removingthese parts.

    2 - 8 Removing and Installing the Processor

  • Disassembly2.D

    isassembly

    4. Turn the release latch towards the unlock symbol , to release the CPU (Figure 2 - 5c).5. Carefully (it may be hot) lift the CPU up out of the socket (Figure 2 - 5d).6. See page 2 - 10 for information on inserting a new CPU.7. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE

    IT!).

    67

    c.

    7

    d.

    Caution

    The heat sink, and CPU area ingeneral, contains parts which aresubject to high temperatures. Allowthe area time to cool before remov-ing these parts.

    Lock Unlock

    6

    6

    Figure 2 - 5 Processor Removal

    Sequence (contd)

    c. Turn the release latchto unlock the CPU.

    d. Lift the CPU out of thesocket.

    7. CPU

    Removing and Installing the Processor 2 - 9

  • Disassembly2.

    Dis

    asse

    mbl

    y

    Processor Installation Procedure1. Insert the CPU , and pay careful attention to the pin alignment; it will fit only one way (DO NOT FORCE IT!). 2. Turn the release latch towards the lock symbol (Figure 2 - 6f).3. Apply the thermal grease to the top of the CPU .4. Replace the heat sink fan unit using the rubber as alignment guide as indicated in Figure 2 - 6h.5. Tighten screws & on the CPU heat sink fan unit to approximately 1/3 of the way.6. Tighten screw fully. 7. Tighten screw fully, and then tighten the screw fully.8. Connect the fan power cable to the mainboard.9. Replace the LCD back cover and screws (page 2 - 6).

    89

    810 11

    12 131413 12

    15

    8. CPU10. Heat Sink & Fan

    3 Screws

    Figure 2 - 6Processor Installation Sequence

    e. Insert the CPU.f. Turn the release latch to-

    wards the lock symbol.g. Apply thermal grease to

    the top of the CPU.h. Replace the heat sink.i. Tighten the 3 screws as

    instructed and connectthe fan cable. e. h.

    8

    g.

    9

    108

    f.

    i.

    13

    14

    12

    15

    Note

    The screws should not betightened in excess of3Kg.

    11

    Caution

    Take extra care not todamage the mainboardcomponents when re-placing the CPU heatsink fan unit and tight-ening the screws.

    2 - 10 Removing and Installing the Processor

  • Disassembly2.D

    isassembly

    Removing the Modem1. Remove the LCD back cover (page 2 - 6).2. Remove screws and from the modem module.3. Remove the modem module from the connector socket , and disconnect the modem cable at point .4. Lift the modem off the mainboard.

    Figure 2 - 7 Modem Removal

    Sequence

    a. Remove the screwsfrom the modem unit.

    b. Remove the modemfrom the connectorand disconnect thecable.

    c. Lift the modem off theboard.

    4. Modem module

    2 Screws

    1 24 3 5

    1

    3 5

    a. c.

    2

    4

    b.

    4

    Removing the Modem 2 - 11

  • Disassembly2.

    Dis

    asse

    mbl

    y

    Removing the Wireless LAN Module1. Remove the LCD back cover (page 2 - 6).2. Carefully disconnect cable , then remove screws & from the module socket.3. The wireless LAN module will pop-up.4. Lift the wireless LAN module up and off the computer.

    Figure 2 - 8Wireless LAN

    Module Removal Sequence

    a. Disconnect the cableand remove the 2screws.

    b. The WLAN module willpop-up.

    c. Remove the WLANmodule.

    1 2 34

    4

    2

    3

    1

    a. c.

    4

    b.

    4

    4. WLAN Module

    2 Screws

    2 - 12 Removing the Wireless LAN Module

  • Disassembly2.D

    isassembly

    Removing the Bluetooth Module1. Remove the LCD back cover (page 2 - 6) and WLAN module (page 2 - 12).2. Carefully disconnect cable & , then remove screw from the module socket.3. Lift the bluetooth module up and off the computer.

    Figure 2 - 9Bluetooth Module

    Removal Sequence

    a. Disconnect the cableand remove the 2screws.

    b. Remove the bluetoothmodule.

    1 2 34

    2

    3

    1

    a.

    4

    b.

    4. Bluetooth Module

    1 Screw

    Removing the Bluetooth Module 2 - 13

  • Disassembly2.

    Dis

    asse

    mbl

    y

    Removing the Floppy Disk Drive Assembly1. Remove the LCD back cover (page 2 - 6).2. Remove screws - from the floppy disk drive assembly.3. Carefully disconnect the floppy disk drive ribbon cable at point .4. Lift the floppy disk drive assembly off the mainboard.

    Figure 2 - 10 Floppy Disk Drive

    Assembly Removal

    Sequence

    a. Remove the screwsfrom the FDD assem-bly and disconnect theFDD ribbon cable.

    b. Lift the FDD assemblyoff the board.

    1 45

    6

    6. FDD Assembly

    4 Screws

    1

    3

    a.

    b.

    4

    6

    2

    5

    2 - 14 Removing the Floppy Disk Drive Assembly

  • Disassembly2.D

    isassembly

    Removing the Optical Device AssemblyFor L295N1. Remove the LCD back cover (page 2 - 6).2. Remove screws - , and disconnect cable , from the optical device.3. Remove the optical device , and remove the screws in order to separate the optical device from the bracket.4. Reverse the removal procedures to intall the new optical device.

    Figure 2 - 11 Optical Device

    Assembly Removal

    Sequence (L295N)

    a. Remove the screwsand disconnect thecable.

    b. Remove the OpticalDevice.

    1 3 45

    a. b.

    1

    2

    3

    5

    4

    5. Optical Device

    3 Screws

    Removing the Optical Device Assembly 2 - 15

  • Disassembly2.

    Dis

    asse

    mbl

    y

    For L297N1. Remove the LCD back cover (page 2 - 6).2. Locate the optical device eject switch and remove screw .3. Push the optical device eject switch to slide the optical device assembly out of the bay.4. Remove the optical device, and reverse the removal procedures to install the new optical device.

    Figure 2 - 12 Optical Device

    Assembly Removal

    Sequence (L297N)

    a. Remove the screw,and push the switchto slide the opticaldevice assembly outof the computer.

    b. Remove the OpticalDevice.

    12

    a.

    b.

    2

    1

    2. Optical Device

    1 Screw

    2 - 16 Removing the Optical Device Assembly

  • Part ListsA

    .Part Lists

    Appendix A: Part ListsThis appendix breaks down the L295N/L297N computers construction into a series of illustrations. The component partnumbers are indicated in the tables opposite the drawings.

    Note: This section indicates the manufacturers part numbers. Your organization may use a different system, so be sureto cross-check any relevant documentation.

    Note: Some assemblies may have parts in common (especially screws). However, the part lists DO NOT indicate thetotal number of duplicated parts used.

    Note: Be sure to check any update notices. The parts shown in these illustrations are appropriate for the system at thetime of publication. Over the product life, some parts may be improved or re-configured, resulting in new part numbers.

    A - 1

  • Part ListsA

    .Par

    t Lis

    ts

    Part List Illustration LocationThe following table indicates where to find the appropriate part list illustration.

    Part L295N L297N

    Base page A - 3 page A - 11

    Bracket (AU) page A - 4

    Bracket (Chi-Mei) page A - 12

    Bracket - Touch Screen (AU) page A - 13

    Bracket - Touch Screen (Chi-Mei) page A - 14

    Front page A - 5 page A - 15

    Front - Touch Screen page A - 6

    Combo page A - 7 page A - 16

    DVD-RW page A - 8 page A - 17

    FDD page A - 9 page A - 18

    HDD page A - 10 page A - 19

    Table A - 1Part List Illustration

    Location

    A - 2 Part List Illustration Location

  • Part ListsA

    .Part Lists

    L295N - Base

    Figure A - 1L295N - Base

    ()

    ( 480MM) L297T

    L295N - Base A - 3

  • Part ListsA

    .Par

    t Lis

    ts

    L295N - Bracket (AU)

    Figure A - 2L295N Bracket (AU)

    ()

    : )

    A - 4 L295N - Bracket (AU)

  • Part ListsA

    .Part Lists

    L295N - Front

    Figure A - 3L295N - Front

    ()

    L295N - Front A - 5

  • Part ListsA

    .Par

    t Lis

    ts

    L295N - Front - Touch Screen

    Figure A - 4L295N - Front - Touch Screen

    ()

    A - 6 L295N - Front - Touch Screen

  • Part ListsA

    .Part Lists

    L295N - Combo Drive

    Figure A - 5L295N -

    Combo Drive

    L295N - Combo Drive A - 7

  • Part ListsA

    .Par

    t Lis

    ts

    L295N - DVD-RW Drive

    L295N

    Figure A - 6L295N -

    DVD-RW Drive

    A - 8 L295N - DVD-RW Drive

  • Part ListsA

    .Part Lists

    L295N - FDD

    Figure A - 7L295N - FDD

    L295N - FDD A - 9

  • Part ListsA

    .Par

    t Lis

    ts

    L295N - HDD

    Figure A - 8L295N - HDD

    A - 10 L295N - HDD

  • Part ListsA

    .Part Lists

    L297N - Base

    Figure A - 1L297N - Base

    ( 480MM) L297T

    ()

    L297N - Base A - 11

  • Part ListsA

    .Par

    t Lis

    ts

    L297N - Bracket (Chi-Mei)

    Figure A - 2L297N - Bracket

    (Chi-Mei)

    ()

    ) L287PB

    : )

    4.5 0.8MM

    A - 12 L297N - Bracket (Chi-Mei)

  • Part ListsA

    .Part Lists

    L297N - Bracket - TouchScreen (AU)

    Figure A - 3L297N - Bracket -

    Touch Screen (AU)

    ()

    : )

    () L297N

    L297N - Bracket - TouchScreen (AU) A - 13

  • Part ListsA

    .Par

    t Lis

    ts

    L297N - Bracket - TouchScreen (Chi-Mei)

    Figure A - 4L297N - Bracket -

    Touch Screen (Chi-Mei)

    ()

    : )

    () L297N

    A - 14 L297N - Bracket - TouchScreen (Chi-Mei)

  • Part ListsA

    .Part Lists

    L297N - Front

    Figure A - 5L297N - Front

    L297N - Front A - 15

  • Part ListsA

    .Par

    t Lis

    ts

    L297N - Combo Drive

    Figure A - 6L297N -

    Combo Drive

    A - 16 L297N - Combo Drive

  • Part ListsA

    .Part Lists

    L297N - DVD-RW Drive

    Figure A - 7L297N -

    DVD-RW Drive

    L297N - DVD-RW Drive A - 17

  • Part ListsA

    .Par

    t Lis

    ts

    L297N - FDD

    Figure A - 8L297N - FDD

    ()

    A - 18 L297N - FDD

  • Part ListsA

    .Part Lists

    L297N - HDD

    Figure A - 9L297N - HDD

    ,

    L297N - HDD A - 19

  • Part ListsP

    art

    List

    s

    A - 20

  • Schematic DiagramsB

    .Schematic D

    iagrams

    Appendix B: Schematic DiagramsThis appendix has circuit diagrams of the L295N/L297N computers PCBs. The following table indicates where to findthe appropriate schematic diagram.

    Diagram - Page Diagram - Page Diagram - Page

    System Block Diagram - Page B - 2 ICH7-M 1/4 (SATA) - Page B - 15 VDD3, VDD5, 3.3V, 5V - Page B - 28

    Clock Generator - Page B - 3 ICH7-M 2/4 (PCI, USB) - Page B - 16 1.5VS, 1.05VS, 2.5VS - Page B - 29

    Yonah CPU - 1 of 2 - Page B - 4 ICH7-M 3/4 (FWH) - Page B - 17 AC-IN, 1.8V, 0.9VS - Page B - 30

    Yonah CPU - 2 of 2 - Page B - 5 ICH7-M 4/4 - Page B - 18 VCORE - Page B - 31

    Calistoga 1/5 Host - Page B - 6 CD-ROM, Ext USB, Mini PCI - Page B - 19 12VS - Page B - 32

    Calistoga 2/5 - Page B - 7 MDC, Mini Card, USB2.0, BT - Page B - 20 Button Board for L295N - Page B - 33

    Calistoga 3/5 DDR - Page B - 8 LAN RTL8110SBL - Page B - 21 Button Board for L297N - Page B - 34

    Calistoga 4/5 - Page B - 9 TI PCI7412 - Page B - 22 CD-ROM Board for L295N - Page B - 35

    Calistoga 5/5 POWER - Page B - 10 PCM Socket, 3-in-1 Socket - Page B - 23 CD-ROM Board for L297N - Page B - 36

    DDRII RIMM - Page B - 11 Azalia CODEC ALC883 & MDC - Page B - 24 USB Board - Page B - 37

    Chrontel CH7308 - Page B - 12 H8 - Page B - 25 CardReader Board - Page B - 38

    LCD Connector - Page B - 13 COM Port, Fan, Parallel Port - Page B - 26 Screw Hole - Page B - 39

    VGA Interface - Page B - 14 Super I/O PC87392, FDD - Page B - 27

    Table B - 1Schematic Diagram

    Version Note

    The schematic dia-grams in this chapterare based upon ver-sion 6-71-L25N0-002.If your mainboard (orother boards) are a lat-er version, pleasecheck with the ServiceCenter for updated di-agrams (if required).

    B - 1

  • Schematic DiagramsB

    .Sch

    emat

    ic D

    iagr

    ams

    System Block Diagram

    33 MHz

    PCI-E

    DDRII

    SATA HDD

    33 MHz

    Parallel PORT

    IMVP-6 VR

    INTSPK

    SDVO

    AZALIA LINK

    PCI BUSALC883

    HUB

    1466 FCBGA

    AZALIA CODEC

    NORTH BRIDGE

    LPC

    R.G.B

    TI PCI7412

    AUDIO AMP

    SOUTH BRIDGE

    667 MHz

    USB0

    Page ?

    TOUCH PANEL

    24MHz

    LVDS

    CK-410MICS9LPR310BGLF

    SPI

    USB2

    USB2.0

    USB1

    478 uFCPGA

    COM PORT

    4.VCORE

    2.1.5VS,1.05VS,2.5VS

    SPI

    Mini PCIE

    480 Mbps

    CRT

    Firmware

    LINEIN

    533/667 MHz

    BULE TOOTH

    GOLANUSB3

    USB6

    652 BGAFDDFLASH

    USB4

    3.ACIN,1.8V,0.9VS

    1.VDD3,VDD5,3.3V,5V

    CHRONTELCH7308

    FSB

    H8 2111

    PCMCIA/1394

    LCD CONN

    PROCESSOR

    945GM

    ICH7-M

    ON BOARD JACK

    CD-ROM

    RTL8110SCL

    AZALIA MDCUSB5

    REALTEK

    FAN

    DDR 2 DIMM X2

    IDE BUS

    PC87392

    DMI

    SATA-150

    MICIN

    USB BOARD

    Yonah/Merom

    Giga-LAN

    TPA1517SPKOUT

    THERMALSENSOR

    CLEVO L295N/L297N System Block Diagram

    Card Reader

    5.12VS

    Sheet 1 of 38Schematic Diagram

    B - 2

  • Schematic DiagramsB

    .Schematic D

    iagrams

    Clock Generator

    Sheet 2 of 38Clock Generator

    BSEL0

    ICH_SMBDAT10,16,19,20

    CLK_DREFSS

    Layout note:

    L56

    HCB1608KF-121T25

    3.3VS

    C149

    0.1U_16V_04C452

    10U_10V_08

    1

    100 MHz

    PM_STPPCI#16

    0

    R84 2.2K_04

    CLK48_CARDBUS

    SIO_48M

    RN3

    22_04_4P2R1 42 3

    CLK_BSEL05

    CLK_MCH_BCLK 5

    CLK_DREFSS 6

    CLK_CPU_BCLK#

    PCLK_CARDBUS

    FSLB

    CLK_BSEL15

    1

    CLK_BSEL25

    CLK_MCH_BCLK# 5

    XTAL_IN

    R92 22_04

    C432 *10P_50V_04

    CLK_MCH_BCLK

    PCLK_LPC

    PEREQ1#: PCIECLK 0, 6PEREQ2#: PCIECLK 1, 8PEREQ3#: PCIECLK 2, 4PEREQ4#: PCIECLK 3, 5, 7PEREQ[1..4]# have internal pull up

    CLK_ICH4816

    200 MHz

    3.3VS

    C442 *10P_50V_04

    PCLK_LAN20

    Host Clock

    C434 *10P_50V_04

    R286 12.1_1%_04 CLK_PCIE_MINI

    CLK_DREFSS# 6

    CLK48_CARDBUS

    SIOPCLK

    PCLK_LAN

    C150

    0.1U_16V_04

    C144

    27P_50V_04

    C173

    0.1U_16V_04

    CLK_SATA 14

    RN5

    22_04_4P2R1 42 3

    PCLK_MINI18

    R289 2.2K_04

    ? ? ? !

    CLK_PCIE_3GPLL#

    C438 *10P_50V_04

    CLK_PCIE_MINI# 19

    CLK_ICH1416

    PCLK_H8

    PCLK_MINI

    133 MHz

    R288 10K_04

    Place terminationclose toCK410M

    SIO_48M

    R123 4.3K_1%_04

    PCLK_H824

    C175

    0.1U_16V_04

    FSLA

    CLK_PCIE_ICH 15 C441 *10P_50V_04

    C433 *10P_50V_04

    R100 33_04

    CLOCK GENERATOR

    R102 33_04

    C445 *10P_50V_04

    SIO_48M26

    CLK_SATA# 14

    R89 33_04

    Layout note:

    3.3VS

    R287 12.1_1%_04

    PCLK_ICH15

    0

    CLK_PCIE_MINI 19

    R101 33_04

    BSEL2

    CLK_PCIE_3GPLL# 6

    Frequency

    CLK_PCIE_MINI#

    CLK_PCIE_3GPLL

    CLK_DREF 6

    PCLK_ICH

    FSLC

    SIOPCLK26

    RN422_04_4P2R

    1 42 3

    CLK_ICH48

    C145

    1U_10V_06

    3.3VS

    PLACE CRYSTALWITHIN 500 MILSOF CK410M

    RN122_04_4P2R

    1 42 3

    X114.318MHz

    12

    R128 10K_04

    ICH_SMBCLK10,16,19,20

    PCLK_H8

    CLK_DREF

    CLK_CPU_BCLK

    C151

    0.1U_16V_04

    PCLK_CARDBUS

    FSLA

    0

    CLK_PCIE_ICH#

    1

    CLK_ICH48

    C451

    1U_10V_06

    C435 *10P_50V_04

    R99 22_04

    MCH_CLKREQ# 6

    CLK_CPU_BCLK# 3

    CLK_DREF#

    RN6

    22_04_4P2R1 42 3

    R93 33_04

    CLK_SATA

    FSLB

    RN822_04_4P2R

    1 42 3

    CLK_DREFSS#

    C146 *10P_50V_04

    R290 12.1_1%_04

    PCLK_LAN

    1

    CLK_PCIE_ICH# 15

    R96 *33_04

    CLK_CPU_BCLK 3

    C437 *10P_50V_04PCLK_LPC16

    XTAL_OUT

    RN722_04_4P2R1 4

    2 3

    1

    CLK_CH730811

    R129 10K_04

    3.3VS

    166 MHz

    0

    R103 0_04

    3.3VS

    C161

    0.1U_16V_04

    R97 2.2K_04

    C439

    10U_10V_08

    WLAN_CLKREQ# 19

    PCLK_LPC

    PM_STPCPU#16

    PCLK_CARDBUS21

    1

    C148

    1U_10V_06

    R88 33_04

    BSEL1

    Layout note:

    CLK_PCIE_3GPLL 6

    FSLC

    C138

    10U_10V_08

    CLK_PCIE_ICH

    SIOPCLK

    C143

    27P_50V_04

    C158

    0.1U_16V_04

    Insatlled:Differential clocklevel is higher

    CLK48_CARDBUS21

    CLK_MCH_BCLK#

    CLK_DREF# 6

    C171

    0.1U_16V_04

    1

    1

    U6

    ICS9LPR310BGLF

    5

    11

    56

    62

    49

    51

    35

    48

    52

    2 6

    8

    55 16

    61

    12

    42

    34

    58

    57

    45

    36

    33

    60

    3

    4

    28 50

    54

    9

    64

    13 21 37 53

    32

    3031

    2726

    2425

    2322

    1920

    1817

    1415

    10

    477 129 46

    3938

    4140

    4443

    59

    63

    PCICLK3

    VDD_48

    VDD

    REF

    CPU_STOP#

    CPUCLK1

    CPUCLK0#

    PCIEX5#

    CPUCLK1#

    CPUCLK0

    GN

    DG

    ND

    PCICLK_F0

    SDATA PEREQ1#

    REF1/FSLC

    FSLA/USB_48MHz_2X

    VDD

    PC

    IEX

    PEREQ2#

    X1

    X2

    VDDA

    PCIEX5

    PEREQ4#

    REF0/FSLB

    PCICLK1_2X

    PCICLK2_2X

    VD

    DPC

    IEX

    VD

    DC

    PU

    SCLK

    *SELDOT/PCICLK_F1

    PCICLK0_2X

    GN

    DG

    ND

    GN

    D

    GN

    D

    PEREQ3#

    PCIEX4PCIEX4#

    SATACLK#SATACLK

    PCIEX3PCIEX3#

    PCIEX2#PCIEX2

    PCIEX1PCIEX1#

    LCDCLK#/PCIEX0#LCDCLK/PCIEX0

    27FIX/DOT9627SS/DOT96#

    VTT_PWRGD#/PD

    VRE

    F

    VD

    D_P

    CI1

    VDD

    _PC

    I0G

    ND

    GN

    DA

    PCIEX6PCIEX6#

    PCIEX7PCIEX7#

    PCIEX8PCIEX8#

    GN

    D

    PCI/PCIEX_STOP#

    PCLK_ICH

    CLKEN#30

    PCLK_MINI

    L57

    HCB1608KF-121T25

    RN922_04_4P2R

    1 42 3

    CLK_SATA#

    L12

    HCB1608KF-121T25

    Clock Generator B - 3

  • Schematic DiagramsB

    .Sch

    emat

    ic D

    iagr

    ams

    Yonah CPU - 1 of 2

    Sheet 3 of 38Yonah CPU 1 of 2

    H_D#[63:0] 5

    H_THERMDC

    Layout Note:

    H_DINV#2 5

    COMP1

    H_A#11

    H_PRDY#

    VDD3

    H_D#[63:0] 5

    H_D#8

    C31

    0.1U_X7R_04

    H_D#55

    0.5" max, Zo= 55 Ohms

    H_ADSTB#15

    H_D#37

    H_D#9

    H_A#21

    H_D#41H_D#42

    R16 39_06

    H_A#16

    H_D#62

    ITP_DBRST#

    H_D#20

    H_DINV#05

    H_FERR#14

    H_D#60

    COMP2

    R52

    4.7K_04

    PM_THRMTRIP# should connect to945GM and ICH7-M without T-ing

    Near toF75383M

    PSI#

    THERM_RST#

    10 MILE

    H_TDIH_A#25

    R40 51.1_1%_04

    H_A#27

    H_PROCHOT#

    H_A#5

    R62100K_04

    H_D#3

    H_BPM1#

    H_D#24

    ITP_DBRST#

    Layout note:

    10 MILE

    VDD3

    H_D#53H_D#21

    R14 680_06

    R43 *1K_04

    H_D#50

    H_D#48

    U4

    ADT1032ARM

    87654

    321

    SCLKSDATA

    ALERT#GNDTHERM#

    D-D+VDD

    H_HIT# 5 H_D#17

    If PROCHOT# is routed between CPU, IMVP and MCH,pull-up resistor has to be 75 ohm ? 5%. If notuse, pull-up resistor has to be 58 ohm ? 5%

    CPUPWRGD 14

    H_BPRI# 5

    H_ADS# 5

    R15 27_06

    H_THERMDC

    H_BR0# 5

    THERM_RST#24

    H_A#22

    Thermal IC

    H_A#29

    H_A#9

    3.3VS

    H_D#13

    H_D#27

    H_D#39

    H_A#20

    H_D#38

    H_D#57

    C37

    0.01U_16V_04

    H_TRST#

    R59

    4.7K_04

    C47

    1U_X5R_06

    Layout note:

    R55 is Reserved for ADT1032ARM

    H_DPWR# 5

    H_TRDY# 5

    H_A#8

    H_D#40

    R23

    54.9_1%_06

    H_A#24

    H_D#14

    H_A#15

    H_A#12

    H_IERR#

    R25

    27.4_1%_06

    H_A#14

    COMP3

    COMP2

    H_D#56

    R18 54.9_1%_06

    H_DSTBP#15

    H_IERR#

    13-51R11-28C

    PSI# 30

    Q9

    AO3409

    G

    DS

    CLK_CPU_BCLK 2H_SMI#14

    H_TDO

    H_REQ#3

    H_DSTBN#3 5

    H_D#45H_D#12

    THM_VDD

    PM_THRMTRIP# 6,14,27

    H_RS#0 5

    H_D#46

    H_BPM3#FROM IMVP6

    to H8 & S.B.

    package: 0402

    H_D#44

    R20

    2K_1%_06

    CPU_BSEL05

    H_DSTBN#05

    H_DRDY# 5

    H_D#11

    H_IGNNE#14

    H_A20M#14H_THERMDA

    H_D#54

    H_DPSLP# 14

    H_DSTBP#3 5

    COMP3

    H_A#17

    H_A#30

    C111

    1U_10V_06

    SMC_THERM 24

    H_REQ#1

    H_D#61

    H_A#19

    H_D#58

    H_D#36

    H_D#32

    Do'nt cross to high speed signal

    H_CPURST# 5

    Layout Note:

    H_DINV#15

    H_D#43

    H_A#7

    H_D#30

    RESERVED

    ADDR GROUP 0 C

    ONTROL

    XDP/ITP SIGNALS

    THERM

    HOST

    CLK

    JSKT1A

    1-1674770-2

    J4L4M3K5M1N2J1N3P5P2L1P4P1R1L2

    K3H2K2J3L5

    Y2U5R3W6U4Y5U2R4T5T3

    W3W5Y4W2Y1V4

    A6A5C4

    D5C6B4A3

    AA1AA4AB2AA3M4N5T2V3B2C3

    B25

    T22

    D2F6D3C1AF1D22C23C24

    A22A21

    D21A24A25

    C7

    AD4AD3AD1AC4AC2AC1AC5AA6AB3AB5AB6C20

    G6E4

    B1F3F4G3G2

    D20B3

    H4

    F1

    H5F21E1

    H1E2G5

    A[3]#A[4]#A[5]#A[6]#A[7]#A[8]#A[9]#A[10]#A[11]#A[12]#A[13]#A[14]#A[15]#A[16]#ADSTB[0]#

    REQ[0]#REQ[1]#REQ[2]#REQ[3]#REQ[4]#

    A[17]#A[18]#A[19]#A[20]#A[21]#A[22]#A[23]#A[24]#A[25]#A[26]#A[27]#A[28]#A[29]#A[30]#A[31]#ADSTB[1]#

    A20M#FERR#IGNNE#

    STPCLK#LINT0LINT1SMI#

    RSVD[01]#RSVD[02]#RSVD[03]#RSVD[04]#RSVD[05]#RSVD[06]#RSVD[07]#RSVD[08]#RSVD[09]#RSVD[10]#

    RSVD[11]#

    RSVD[12]#

    RSVD[13]#RSVD[14]#RSVD[15]#RSVD[16]#RSVD[17]#RSVD[18]#RSVD[19]#RSVD[20]#

    BCLK[0]BCLK[1]

    PROCHOTTHERMDATHERMDC

    THERMTRIP#

    BPM[0]#BPM[1]#BPM[2]#BPM[3]#PRDY#PREQ#

    TCKTDI

    TDOTMS

    TRST#DBR#

    HIT#HITM#

    RESET#RS[0]#RS[1]#RS[2]#TRDY#

    IERR#INIT#

    LOCK#

    BR0#

    DEFER#DRDY#DBSY#

    ADS#BNR#BPRI#

    H_D#7

    H_D#[63:0]5

    H_STPCLK#14

    R66 56_04

    DATA GRP 3

    DATA GRP 0

    DATA GRP 1

    MISC

    DATA GRP 2

    JSKT1B

    1-1674770-2

    E22F24E26H22F23G25E25E23K24G24J24J23H26F26K22H25H23G22J26

    N22K25P26R23L25L22L23M23P25P22P23T24R24L26T25N24M24N25M26

    AD26

    C26

    D25

    B22B23C21

    R26U26U1V1

    E5B5D24D6D7AE6

    AC22AC23AB22AA21AB21AC25AD20AE22AF23AD24AE21AD21AE25AF25AF22AF26AD23AE24AC20

    AA23AB24V24V26W25U23U25U22AB25W22Y23AA26Y26Y22AC26AA24W24Y25V23

    D[0]#D[1]#D[2]#D[3]#D[4]#D[5]#D[6]#D[7]#D[8]#D[9]#D[10D[11]#D[12]#D[13]#D[14]#D[15]#DSTBN[0]#DSTBP[0]#DINV[0]#

    D[16]#D[17]#D[18]#D[19]#D[20]#D[21]#D[22]#D[23]#D[24]#D[25]#D[26]#D[27]#D[28]#D[29]#D[30]#D[31]#DSTBN[1]#DSTBP[1]#DINV[1]#

    GTLREF

    TEST1

    TEST2

    BSEL[0]BSEL[1]BSEL[2]

    COMP[0]COMP[1]COMP[2]COMP[3]

    DPRSTP#DPSLP#DPWR#

    PWRGOODSLP#PSI#

    D[48]#D[49]#D[50]#D[51]#D[52]#D[53]#D[54]#D[55]#D[56]#D[57]#D[58]#D[59]#D[60]#D[61]#D[62]#D[63]#

    DSTBN[3]#DSTBP[3]#

    DINV[3]#

    D[32]#D[33]#D[34]#D[35]#D[36]#D[37]#D[38]#D[39]#D[40]#D[41]#D[42]#D[43]#D[44]#D[45]#D[46]#D[47]#

    DSTBN[2]#DSTBP[2]#

    DINV[2]#

    R26

    27.4_1%_06

    R67 150_1%_06

    COMP0, COMP2: 0.5" Max, Zo=27.4 OhmsCOMP1, COMP3: 0.5" Max, Zo=55 OhmsBest estimate is 18 mils wide trace for outerlayers and 14 mils wide trace if on internallayers.

    10mil

    CPU_GTLREF

    H_RS#2 5

    H_D#5

    H_D#19

    Q82N7002WG

    DS

    THM_VDD

    R68

    100K_04

    H_D#52

    H_A#31

    H_ADSTB#05

    Layout Note:Route H_THERMDA andH_THERMDC on same layer.10 mil trace on 10 milspacing.

    1.05VS

    H_PROCHOT#

    H_D#63H_DSTBN#15

    H_A#10

    H_TCK

    H_REQ#0

    H_D#51

    H_D#25

    R61 22_1%_04

    C108 2200P_50V_04

    H_A#23

    H_TDI

    H_A#4

    H_D#26

    THERM_ALERT# 16,24

    H_REQ#2

    H_D#15

    COMP0

    H_D#10

    H_LOCK# 5H_D#47

    H_D#35

    H_TMS

    H_REQ#4

    R46 0_04

    H_D#[63:0]5

    H_BNR# 5

    COMP0

    H_TCK

    H_D#49

    H_A#6

    H_DSTBN#2 5

    H_D#29

    H_PREQ#

    SMD_THERM

    Voltage

    H_D#28

    H_D#23

    H_HITM# 5

    H_A#26

    H_A#13

    H_INTR14

    H_DEFER# 5

    H_D#33

    H_D#18

    H_DSTBP#05

    H_REQ#[4:0]5

    R54 *0_04

    H_A#18

    PM_THRMTRIP# 6,14,27

    H_CPUSLP# 5

    R50

    10K_04

    H_TRST#

    H_A#3H_D#1

    H_BPM0#

    H_D#2

    R19 1K_1%_06

    H_NMI14CLK_CPU_BCLK# 2

    H_TMS

    H_D#4

    R17 150_1%_06

    H_D#34

    COMP1

    CPU_BSEL25CPU_BSEL15

    H_A#[31:3]5

    H_DPRSTP# 14,30

    H_D#6

    H_A#[31:3]5

    H_INIT# 14

    H_THERMDA

    translation

    H_D#31

    H_D#22

    H_RS#1 5

    H_D#0

    1.05VS

    SMD_THERM 24

    H_D#16

    H_D#59

    H_DBSY# 5

    H_PREQ#

    H_A#28

    R63 68_06

    R24

    54.9_1%_0620 mil

    H_DSTBP#2 5

    H_DINV#3 5

    Within 2.0"of the CPU

    H_BPM2#

    THERM_ALERT#

    R55 *10K_04

    B - 4 Yonah CPU - 1 of 2

  • Schematic DiagramsB

    .Schematic D

    iagrams

    Yonah CPU - 2 of 2

    Sheet 4 of 38Yonah CPU 2 of 2

    C78

    22U_X5R_08

    C385

    22U_X5R_08

    C121

    1U_X5R_06

    C127

    22U_X5R_08

    C125

    1U_X5R_06

    C63

    22U_X5R_08

    C1230.01U_16V_04

    Layout note:

    VCORE

    1.5VS

    C394

    22U_X5R_08

    C387

    22U_X5R_08

    C116

    22U_X5R_08

    H_VID1

    C369

    22U_X5R_08

    C400

    0.1U_X7R_04

    Layout Note:

    C122

    1U_X5R_06

    C388

    0.1U_X7R_04

    R13

    100_1%_06

    H_VID0

    +C73

    150U_4V_D

    VCORE

    Route VCCSENSE andVSSSENSE traces at 27.4Ohmwith 50 mil spacing.Place PU and PD within 1inch of CPU.

    H_VID5

    H_VID2

    C407

    0.1U_X7R_04

    C128

    22U_X5R_08

    VCCSENSE

    C115

    1U_X5R_06

    130mA

    C114

    1U_X5R_06

    C353

    0.1U_X7R_04

    C365

    0.1U_X7R_04

    VCORE

    VCORE

    C386

    22U_X5R_08

    C399

    0.1U_X7R_04

    H_VID3

    C384

    0.1U_X7R_04

    C361

    0.1U_X7R_04

    C120

    22U_X5R_08

    H_VID6

    2A

    C79

    22U_X5R_08

    C24

    1U_X5R_06

    VCORE

    H_VID[6:0] 30

    C64

    22U_X5R_08

    1.05VS

    Co-layout

    C402

    22U_X5R_08

    C18

    1U_X5R_06

    VSSSENSE 30

    R12

    100_1%_06

    VCCP = 1.05V (0.997V~1.102V)

    1.05VS

    C126

    1U_X5R_06

    C377

    0.1U_X7R_04

    C364

    0.1U_X7R_04H_VID[6:0]

    VCORE

    C17

    1U_X5R_06

    1.05VS

    VCCSENSE 30

    C117

    22U_X5R_08

    VCORE

    C21

    1U_X5R_06

    PLACE NEAR CPU

    C350

    0.1U_X7R_04

    JSKT1D

    1-1674770-2

    A4A8

    A11A14A16A19A23A26B6B8

    B11B13B16B19B21B24C5C8

    C11C14C16C19

    C2C22C25

    D1D4D8

    D11D13D16D19D23D26

    E3E6E8

    E11E14E16E19E21E24F5F8

    F11F13F16F19F2

    F22F25G4G1

    G23G26

    H3H6

    H21H24

    J2J5

    J22J25K1K4

    K23K26

    L3L6

    L21L24M2M5

    M22M25

    N1N4

    N23N26

    P3

    P6P21P24R2R5R22R25T1T4T23T26U3U6U21U24V2V5V22V25W1W4W23W26Y3Y6Y21Y24AA2AA5AA8AA11AA14AA16AA19AA22AA25AB1AB4AB8AB11AB13AB16AB19AB23AB26AC3AC6AC8AC11AC14AC16AC19AC21AC24AD2AD5AD8AD11AD13AD16AD19AD22AD25AE1AE4AE8AE11AE14AE16AE19AE23AE26AF3AF6AF8AF11AF13AF16AF19AF21AF24

    VSS[001]VSS[002]VSS[003]VSS[004]VSS[005]VSS[006]VSS[007]VSS[008]VSS[009]VSS[010]VSS[011]VSS[012]VSS[013]VSS[014]VSS[015]VSS[016]VSS[017]VSS[018]VSS[019]VSS[020]VSS[021]VSS[022]VSS[023]VSS[024]VSS[025]VSS[026]VSS[027]VSS[028]VSS[029]VSS[030]VSS[031]VSS[032]VSS[033]VSS[034]VSS[035]VSS[036]VSS[037]VSS[038]VSS[039]VSS[040]VSS[041]VSS[042]VSS[043]VSS[044]VSS[045]VSS[046]VSS[047]VSS[048]VSS[049]VSS[050]VSS[051]VSS[052]VSS[053]VSS[054]VSS[055]VSS[056]VSS[057]VSS[058]VSS[059]VSS[060]VSS[061]VSS[062]VSS[063]VSS[064]VSS[065]VSS[066]VSS[067]VSS[068]VSS[069]VSS[070]VSS[071]VSS[072]VSS[073]VSS[074]VSS[075]VSS[076]VSS[077]VSS[078]VSS[079]VSS[080]VSS[081]

    VSS[082]VSS[083]VSS[084]VSS[085]VSS[086]VSS[087]VSS[088]VSS[089]VSS[090]VSS[091]VSS[092]VSS[093]VSS[094]VSS[095]VSS[096]VSS[097]VSS[098]VSS[099]VSS[100]VSS[101]VSS[102]VSS[103]VSS[104]VSS[105]VSS[106]VSS[107]VSS[108]VSS[109]VSS[110]VSS[111]VSS[112]VSS[113]VSS[114]VSS[115]VSS[116]VSS[117]VSS[118]VSS[119]VSS[120]VSS[121]VSS[122]VSS[123]VSS[124]VSS[125]VSS[126]VSS[127]VSS[128]VSS[129]VSS[130]VSS[131]VSS[132]VSS[133]VSS[134]VSS[135]VSS[136]VSS[137]VSS[138]VSS[139]VSS[140]VSS[141]VSS[142]VSS[143]VSS[144]VSS[145]VSS[146]VSS[147]VSS[148]VSS[149]VSS[150]VSS[151]VSS[152]VSS[153]VSS[154]VSS[155]VSS[156]VSS[157]VSS[158]VSS[159]VSS[160]VSS[161]VSS[162]

    C88

    22U_X5R_08

    C348

    0.1U_X7R_04

    C69

    22U_X5R_08

    C379

    0.1U_X7R_04

    C395

    0.1U_X7R_04

    H_VID4

    VSSSENSE

    C87

    22U_X5R_08

    C20

    1U_X5R_06

    C23

    1U_X5R_06

    JSKT1C

    1-1674770-2

    A7A9

    A10A12A13A15A17A18A20B7B9

    B10B12B14B15B17B18B20C9

    C10C12C13C15C17C18D9

    D10D12D14D15D17D18

    E7E9

    E10E12E13E15E17E18E20F7F9

    F10F12F14F15F17F18F20AA7AA9

    AA10AA12AA13AA15AA17AA18AA20AB9

    AC10AB10AB12AB14AB15AB17AB18

    AB20AB7AC7AC9AC12AC13AC15AC17AC18AD7AD9AD10AD12AD14AD15AD17AD18AE9AE10AE12AE13AE15AE17AE18AE20AF9AF10AF12AF14AF15AF17AF18AF20

    V6G21J6K6M6J21K21M21N21N6R21R6T21T6V21W21

    B26

    AD6AF5AE5AF4AE3AF2AE2

    AF7

    AE7

    VCC[001]VCC[002]VCC[003]VCC[004]VCC[005]VCC[006]VCC[007]VCC[008]VCC[009]VCC[010]VCC[011]VCC[012]VCC[013]VCC[014]VCC[015]VCC[016]VCC[017]VCC[018]VCC[019]VCC[020]VCC[021]VCC[022]VCC[023]VCC[024]VCC[025]VCC[026]VCC[027]VCC[028]VCC[029]VCC[030]VCC[031]VCC[032]VCC[033]VCC[034]VCC[035]VCC[036]VCC[037]VCC[038]VCC[039]VCC[040]VCC[041]VCC[042]VCC[043]VCC[044]VCC[045]VCC[046]VCC[047]VCC[048]VCC[049]VCC[050]VCC[051]VCC[052]VCC[053]VCC[054]VCC[055]VCC[056]VCC[057]VCC[058]VCC[059]VCC[060]VCC[061]VCC[062]VCC[063]VCC[064]VCC[065]VCC[066]VCC[067]

    VCC[68]VCC[69]VCC[70]VCC[71]VCC[72]VCC[73]VCC[74]VCC[75]VCC[76]VCC[77]VCC[78]VCC[79]VCC[80]VCC[81]VCC[82]VCC[83]VCC[84]VCC[85]VCC[86]VCC[87]VCC[88]VCC[89]VCC[90]VCC[91]VCC[92]VCC[93]VCC[94]VCC[95]VCC[96]VCC[97]VCC[98]VCC[99]

    VCC[100]

    VCCP[01]VCCP[02]VCCP[03]VCCP[04]VCCP[05]VCCP[06]VCCP[07]VCCP[08]VCCP[09]VCCP[10]VCCP[11]VCCP[12]VCCP[13]VCCP[14]VCCP[15]VCCP[16]

    VCCA

    VID[0]VID[1]VID[2]VID[3]VID[4]VID[5]VID[6]

    VCCSENSE

    VSSSENSE

    Near pin B26

    VCORE

    +C98

    *220U_2.5V_B

    Layout note:

    C383

    0.1U_X7R_04

    C373

    0.1U_X7R_04

    C401

    22U_X5R_08

    C370

    22U_X5R_08

    C398

    22U_X5R_08

    Yonah CPU - 2 of 2 B - 5

  • Schematic DiagramsB

    .Sch

    emat

    ic D

    iagr

    ams

    Calistoga 1/5 Host

    Sheet 5 of 38Calistoga 1/5 Host

    1.05VS

    H_DINV#3 3

    H_D#24

    0

    R78 *0_04

    H_D#17

    C93

    0.1U_X7R_04

    BSEL1

    H_A#15

    H_D#40H_D#41

    H_A#4

    MCH_HXRCOMP

    H_DSTBN#0 3

    H_A#22H_A#21

    H_A#8

    200 MHz

    H_D#20

    H_A#3

    H_ADSTB#0 3

    H_A#13

    10 mils wide, 20 mils spacing

    CLK_MCH_BCLK#2

    H_A#9

    1.05VS

    H_D#52

    R261

    221_1%_06

    1

    H_A#29

    H_D#53

    Layout Notice:

    H_DINV#2 3

    H_D#3H_D#2

    MCH_HYSWING

    CLK_MCH_BCLK2

    H_TRDY# 3

    H_D#[63:0]3

    CLK_BSEL1 2

    H_D#54

    H_D#22

    H_D#18

    H_CPUSLP# 3

    H_A#30

    MCH_HXSWING and MCH_HYSWINGshould be 10 mils tracesand 20 mils spacing

    MCH_HYSCOMP

    R264

    100_1%_06

    R36

    100_1%_06

    H_A#[31:3] 3

    HOST

    U3A

    CALISTOGA

    H9C9E11G11F11G12F9H11J12G14D9J14H13J15F14D12A11C11A12A13E13G13F12B12B14C12A14C14D14

    E8B9C13

    J13

    C6F6C7

    AG1AG2

    B7

    E1E2E4

    Y1U1W1

    F1J1H1J6H3K2G1G2K9K1K7J8H4J3

    K11G4

    T10W11

    T3U7U9

    U11T11W9T1T8T4

    W7U5T9

    W6T5

    AB7AA9W4W3Y3Y7W5

    Y10AB8W2

    AA4AA7AA2AA6

    AA10Y8

    AA1AB4AC9

    AB11AC11

    AB3AC2AD1AD9AC1AD7AC6AB5

    AD10AD4AC8

    A7C3

    J7W8U3AB10

    J9H8

    K4T7Y5AC4

    K3T6AA5AC5

    D3D4B3

    D8G8B8F8A8

    B4E6D6

    E3E7

    K13

    H_A#_3H_A#_4H_A#_5H_A#_6H_A#_7H_A#_8H_A#_9

    H_A#_10H_A#_11H_A#_12H_A#_13H_A#_14H_A#_15H_A#_16H_A#_17H_A#_18H_A#_19H_A#_20H_A#_21H_A#_22H_A#_23H_A#_24H_A#_25H_A#_26H_A#_27H_A#_28H_A#_29H_A#_30H_A#_31

    H_ADS#H_ADSTB#_0H_ADSTB#_1

    H_VREF_0

    H_BNR#H_BPRI#

    H_BREQ#0

    H_CLKIN#H_CLKIN

    H_CPURST#

    H_XRCOMPH_XSCOMPH_XSWING

    H_YRCOMPH_YSCOMPH_YSWING

    H_D#_0H_D#_1H_D#_2H_D#_3H_D#_4H_D#_5H_D#_6H_D#_7H_D#_8H_D#_9H_D#_10H_D#_11H_D#_12H_D#_13H_D#_14H_D#_15H_D#_16H_D#_17H_D#_18H_D#_19H_D#_20H_D#_21H_D#_22H_D#_23H_D#_24H_D#_25H_D#_26H_D#_27H_D#_28H_D#_29H_D#_30H_D#_31H_D#_32H_D#_33H_D#_34H_D#_35H_D#_36H_D#_37H_D#_38H_D#_39H_D#_40H_D#_41H_D#_42H_D#_43H_D#_44H_D#_45H_D#_46H_D#_47H_D#_48H_D#_49H_D#_50H_D#_51H_D#_52H_D#_53H_D#_54H_D#_55H_D#_56H_D#_57H_D#_58H_D#_59H_D#_60H_D#_61H_D#_62H_D#_63

    H_DBSY#H_DEFER#

    H_DINV#_0H_DINV#_1H_DINV#_2H_DINV#_3

    H_DPWR#H_DRDY#

    H_DSTBN#_0H_DSTBN#_1H_DSTBN#_2H_DSTBN#_3

    H_DSTBP#_0H_DSTBP#_1H_DSTBP#_2H_DSTBP#_3

    H_HIT#H_HITM#

    H_LOCK#

    H_REQ#_0H_REQ#_1H_REQ#_2H_REQ#_3H_REQ#_4

    H_RS#_0H_RS#_1H_RS#_2

    H_SLPCPU#H_TRDY#

    H_VREF_1H_ADS# 3

    H_D#26

    MCH_HXSWING

    H_D#14

    H_D#47

    MCH_HXSCOMP

    C412

    0.1U_X7R_04

    H_DSTBP#1 3

    H_A#18

    H_D#63

    1

    Layout Notice:

    MCH_BSEL1 6

    R91 *0_04

    H_D#60

    H_D#44

    1.05VS

    H_BNR# 3

    R86 0_04

    R75 0_04

    R262

    100_1%_06H_RS#2 3

    H_ADSTB#1 3

    H_D#39

    R74

    1K_04

    Frequency

    0

    CLK_BSEL0 2

    H_D#55

    H_D#16

    R95 0_04

    R32 24.9_1%_06

    H_A#23

    R90

    1K_04

    H_D#58

    1.05VS

    H_HITM# 3

    H_REQ#2

    133 MHz

    H_BR0# 3

    BSEL0

    H_DSTBP#0 3

    H_D#59

    H_A#25

    H_D#29H_D#30

    H_DSTBN#2 3

    H_REQ#1

    H_D#21

    H_A#28

    1.05VS

    H_A#20

    1

    H_A#6

    H_BPRI# 3

    R77

    1K_04H_DSTBN#1 3

    H_D#45

    H_A#11

    H_DBSY# 3

    H_D#46

    H_D#43

    C428

    0.1U_X7R_04

    H_D#27

    H_DSTBP#3 3

    H_A#24

    H_D#5

    R94

    1K_04

    0

    H_A#14H_D#12

    H_REQ#0

    H_D#57

    MCH_HXSCOMP

    H_D#36R51 54.9_1%_06

    H_RS#0 3

    H_D#42

    H_D#10

    R85

    1K_04

    H_D#33

    H_D#61

    1

    H_A#12

    R72 *1K_04

    H_A#5

    H_REQ#4

    H_D#62

    H_DSTBN#3 3

    H_D#34

    MCH_BSEL2 6

    MCH_HYRCOMP

    H_D#8

    H_DEFER# 3

    H_D#9

    H_D#0

    100 MHz

    0.1uF should be placed100mils or less from GMCHpin.

    H_LOCK# 3

    H_D#13 H_A#16

    Host Clock

    H_D#31

    H_D#7

    H_RS#1 3

    H_A#27

    CLK_BSEL2 2

    H_CPURST# 3

    H_D#25

    H_DRDY# 3

    H_D#35

    H_DPWR# 3

    MCH_HXRCOMP

    H_D#51

    1

    CPU_BSEL23

    1.05VS

    MCH_HYSCOMP

    R71

    1K_04

    H_DSTBP#2 3

    H_D#4

    MCH_BSEL0 6

    H_A#19

    H_D#6

    1

    1

    H_D#1

    H_D#48

    Layout Notice:

    H_REQ#3

    H_A#7

    R38 54.9_1%_06

    H_REQ#[4:0] 3

    H_A#31

    H_D#49

    H_A#17

    0

    1.05VS

    H_D#28

    H_D#23

    H_D#50

    H_D#56

    R57 24.9_1%_06

    CPU_BSEL03

    166 MHz

    H_D#15

    CPU_BSEL13

    MCH_HYRCOMPH_DINV#0 3

    H_D#37

    H_A#10

    R39

    221_1%_06

    H_D#32

    H_D#11

    H_A#26

    BSEL2

    H_D#38

    R263

    200_1%_06

    H_DINV#1 3

    H_HIT# 3

    H_D#19

    1

    B - 6 Calistoga 1/5 Host

  • Schematic DiagramsB

    .Schematic D

    iagrams

    Calistoga 2/5

    Sheet 6 of 38Calistoga 2/5

    CLK_DREFSS 2

    SDVOB_RED# 11

    C62

    1U_X5R_06

    R270 10K_04

    DMI_RXP[3:0] 15

    R249 5.6K_04

    R250 *2.2K_04

    MCH_CFG13

    MCH_CFG12

    PM_EXTTS1#6

    MCH_CFG9

    R268 39.2_1%_06

    MCH_CFG9 (PCIE Graphics Lane) 1.8V

    DMI_RXN1

    MCH_CFG11

    CLK_DREF 2

    MCH_CFG11

    R282 10K_04

    DMI_TXP[3:0] 15

    M_VREF_MCH

    Enable

    R269 *1K_04

    M_ODT0 10

    PEG_COMP

    MCH_CFG9

    Reverse Lane

    PM_EXTTS0#10

    MCH_CFG7

    MCH_CFG13

    R81 150_1%_06

    CLK_DREFSS# 2

    M_CLK_DDR1 10

    M_RCOMPP

    C135 *22P_50V_04

    MCH_CFG20

    DMIx4

    DELAY _PWRGD16,30

    0.1uF should be placed100mils or less from GMCHpin.

    DMI_TXP1

    MCH_CFG19

    Calistoga Strapping

    2.5VS

    M_CS3# 10

    DAC_DDCADATA13

    MCH_CFG7

    MCH_CFG5

    Lanes reversed

    DMI_TXP3

    MCH_CFG5

    R278 10K_04

    Layout Notice:

    CLK_PCIE_3GPLL# 2

    R271 10K_04

    SDVO and PCIe x1 are operatingsimultaneously via the PEG port

    M_CS1# 10

    M_CLK_DDR0 10

    PM_EXTTS1#_R

    DMI_TXN3

    PM_EXTTS0#

    C416 0.1U_16V_04

    R244 80.6_1%_06

    R246 100_04

    RSVD

    M_CLK_DDR0#

    DMI_RXN[3:0] 15

    R27 1K_1%_06

    3.3VS

    DMI_RXP1

    M_CLK_DDR0# 10

    MCH_BSEL05

    SDVO_STALL 11

    MCH_CFG13

    M_CLK_DDR2 10

    M_ODT2 10

    MCH_CFG11 (PSB 4X CLK ENABL)

    MCH_CFG18 (VCC select)

    DAC_BLUE13

    DAC_GREEN13

    DMI_TXN0

    DMI_TXN2

    C101 0.1U_16V_04

    R283 *0_04

    M_CKE0 10

    M_RCOMPN

    M_CLK_DDR2#

    LVDS

    PCI-EXPRESS GRAPHICS

    TVVGA

    U3C

    CALISTOGA

    D40D38

    F34G38H34J38L34M38N34P38R34T38V34W38Y 34AA38AB34AC38

    D34F38G34H38J34L38M34N38P34R38T34V38W34Y 38AA34AB38

    F36G40H36J40L36M40N36P40R36T40V36W40Y 36AA40AB36AC40

    D36F40G36H40J36L40M36N40P36R40T36V40W36Y 40AA36AB40

    J30H30H29G26G25B38C35F32C33C32

    A33A32

    C37B35A37

    B37B34A36

    E27E26

    G30D30F29

    F30D29F28

    D32

    A16C18A19

    J20B16B18B19

    E23D23

    C26C25

    C22B22

    G23J22

    A21B21

    H23

    EXP_A_COMPIEXP_A_COMPO

    EXP_A_RXN_0EXP_A_RXN_1EXP_A_RXN_2EXP_A_RXN_3EXP_A_RXN_4EXP_A_RXN_5EXP_A_RXN_6EXP_A_RXN_7EXP_A_RXN_8EXP_A_RXN_9

    EXP_A_RXN_10EXP_A_RXN_11EXP_A_RXN_12EXP_A_RXN_13EXP_A_RXN_14EXP_A_RXN_15

    EXP_A_RXP_0EXP_A_RXP_1EXP_A_RXP_2EXP_A_RXP_3EXP_A_RXP_4EXP_A_RXP_5EXP_A_RXP_6EXP_A_RXP_7EXP_A_RXP_8EXP_A_RXP_9

    EXP_A_RXP_10EXP_A_RXP_11EXP_A_RXP_12EXP_A_RXP_13EXP_A_RXP_14EXP_A_RXP_15

    EXP_A_TXN_0EXP_A_TXN_1EXP_A_TXN_2EXP_A_TXN_3EXP_A_TXN_4EXP_A_TXN_5EXP_A_TXN_6EXP_A_TXN_7EXP_A_TXN_8EXP_A_TXN_9

    EXP_A_TXN_10EXP_A_TXN_11EXP_A_TXN_12EXP_A_TXN_13EXP_A_TXN_14EXP_A_TXN_15

    EXP_A_TXP_0EXP_A_TXP_1EXP_A_TXP_2EXP_A_TXP_3EXP_A_TXP_4EXP_A_TXP_5EXP_A_TXP_6EXP_A_TXP_7EXP_A_TXP_8EXP_A_TXP_9

    EXP_A_TXP_10EXP_A_TXP_11EXP_A_TXP_12EXP_A_TXP_13EXP_A_TXP_14EXP_A_TXP_15

    L_BKLTENL_CLKCTLAL_CLKCTLBL_DDC_CLKL_DDC_DATAL_IBGL_VBGL_VDDENL_VREFHL_VREFL

    LA_CLK#LA_CLK

    LA_DATA#_0LA_DATA#_1LA_DATA#_2

    LA_DATA_0LA_DATA_1LA_DATA_2

    LB_CLK#LB_CLK

    LB_DATA#_0LB_DATA#_1LB_DATA#_2

    LB_DATA_0LB_DATA_1LB_DATA_2

    L_BKLTCTL

    TV_DACA_OUTTV_DACB_OUTTV_DACC_OUT

    TV_IREFTV_IRTNATV_IRTNBTV_IRTNC

    CRT_BLUECRT_BLUE#

    CRT_DDC_CLKCRT_DDC_DATA

    CRT_GREENCRT_GREEN#

    CRT_HSY NCCRT_IREF

    CRT_REDCRT_RED#

    CRT_VSY NC

    1.5VS

    DAC_HSY NC13

    SDVO_STALL# 11

    MAX=0.5"

    DMI_RXN0

    M_CLK_DDR3

    C411 0.1U_16V_04

    DAC_VSY NC13

    M_CLK_DDR3 10

    M_CLK_DDR3# 10

    DMI_RXN3

    R284 255_1%_06

    3.3VS

    MCH_CFG12

    CLK_PCIE_3GPLL 2

    M_CLK_DDR2# 10

    SDVOB_BLUE 11

    LOW

    MCH_ICH_SY NC#15

    M_CKE1 10

    R251 5.6K_04

    8X ENABLE

    MCH_CFG16

    DMIx2

    DMI_TXN[3:0] 15MCH_CLKREQ#2

    C106 0.1U_16V_04

    R275 10K_04

    C414 0.1U_16V_04

    M_CLK_DDR1# 10

    MCH_CFG12

    R276 *0_04

    MCH_CFG16 (FSB Dynamic ODT)

    SDVOB_CLKN 11

    C136 *22P_50V_04

    DAC_RED13

    R281 39.2_1%_06

    Mobile CPU

    MCH_BSEL[2..0]001 = PSB533011 = PSB667Others =Reserved

    M_RCOMPP

    R277 0_04

    DAC_DDCACLK13

    PM_THRMTRIP#3,14,27

    DMI_RXP2

    R252 *2.2K_04

    DEL 8/1

    R274 10K_04

    R248 *2.2K_04

    C134 *22P_50V_04

    M_CLK_DDR3#

    MCH_CFG20 (PCIe backwardinerpoerability mode)

    M_CKE2 10

    DMI_TXN1

    PM_EXTTS1#_R

    SDVO_CTRLCLK

    MCH_CFG16

    DMI_TXP2

    R254 *2.2K_04 PM_DPRSLPVR16,30

    NB_RSTIN#

    R83 150_1%_06

    R259 *2.2K_04

    SDVOB_RED 11

    MCH_CFG19 (DMI Lane reversal)

    3.3VS

    M_CS0# 10

    MCH_CFG5

    R272 *1K_04

    DMI_TXN1

    M_CS2# 10

    1.8V

    CLK_DREF# 2

    R245 80.6_1%_06

    1.05V

    SDVO_CTRLDATA11

    R253 *0_04

    Normal operation

    1.5V

    MCH_BSEL25

    SDVOB_CLKP 11

    M_CLK_DDR0

    MCH_CFG7 (CPU Strap)

    NB_RSTIN#

    R273 *1K_04

    M_ODT3 10

    M_ODT1 10

    1.5VS

    R266 *2.2K_04

    RSVD

    DMI_TXP0

    MCH_CFG19

    R82 150_1%_06

    1.5VS

    DMI_RXN2

    C70

    0.01U_16V_04

    SDVO_CTRLCLK11

    C419 0.1U_16V_04

    HIGH

    M_RCOMPN

    C103 0.1U_16V_04

    MCH_CFG18

    PM_EXTTS0#

    PM

    MISC

    NC

    DDR MUXING

    CLK

    DMI

    CFG

    RSVD

    U3B

    CALISTOGA

    D1C41C1

    BA41BA40BA39

    BA3BA2BA1B41B2

    AY41AY 1

    AW41AW1A40A4

    A39A3

    H28H27

    AY 35AR1AW7AW40

    AW35AT1AY 7AY 40

    AU20AT20BA29AY 29

    AW13AW12AY 21AW21

    AL20AF10

    BA13BA12AY 20AU21

    AV9AT9

    AK1AK41

    J25K27J26

    K16K18J18F18E15F15E18D19D16G16E16D15G15K15C15H16G18H15

    G28F25H26G6

    AH33AH34

    A27A26C40D41

    AE35AF39AG35AH39

    AC35AE39AF35AG39

    AE37AF41AG37AH41

    AC37AE41AF37AG41

    AF33AG33

    T32R32

    AG11AF11

    K28

    J19

    H32

    F3F7

    H7

    K30J29A41A35A34D28D27

    NC0NC1NC2NC3NC4NC5NC6NC7NC8NC9NC10NC11NC12NC13NC14NC15NC16NC17NC18

    SDVO_CTRLCLKSDVO_CTRLDATA

    SM_CK_0SM_CK_1SM_CK_2SM_CK_3

    SM_CK#_0SM_CK#_1SM_CK#_2SM_CK#_3

    SM_CKE_0SM_CKE_1SM_CKE_2SM_CKE_3

    SM_CS#_0SM_CS#_1SM_CS#_2SM_CS#_3

    SM_OCDCOMP_0SM_OCDCOMP_1

    SM_ODT_0SM_ODT_1SM_ODT_2SM_ODT_3

    SM_RCOMP#SM_RCOMP

    SM_VREF_0SM_VREF_1

    CFG_18CFG_19CFG_20

    CFG_0CFG_1CFG_2CFG_3CFG_4CFG_5CFG_6CFG_7CFG_8CFG_9CFG_10CFG_11CFG_12CFG_13CFG_14CFG_15CFG_16CFG_17

    PM_BMBUSY #PM_EXTTS#_0PM_EXTTS#_1PM_THRMTRIP#PWROKRSTIN#

    D_REFCLKIN#D_REFCLKIN

    D_REFSSCLKIN#D_REFSSCLKIN

    DMI_RXN_0DMI_RXN_1DMI_RXN_2DMI_RXN_3

    DMI_RXP_0DMI_RXP_1DMI_RXP_2DMI_RXP_3

    DMI_TXN_0DMI_TXN_1DMI_TXN_2DMI_TXN_3

    DMI_TXP_0DMI_TXP_1DMI_TXP_2DMI_TXP_3

    G_CLKIN#G_CLKIN

    RSVD_1RSVD_2

    RSVD_5RSVD_6

    ICH_SY NC#

    RSVD_8

    CLK_REQ0#

    RSVD_3RSVD_4

    RSVD_7

    TV_DCONSEL0TV_DCONSEL1RSVD_11RSVD_12RSVD_13RSVD_14RSVD_15

    R255 1.5K_04

    NormalMCH_CFG18

    R256 *2.2K_04

    Disable

    CFG[17..3] hasinternal pull up

    CFG[20..18] hasinternal pull down

    SDVOB_GREEN 11

    M_CLK_DDR1

    R265 24.9_1%_06

    DMI_RXP0

    SDVOB_GREEN# 11

    M_CLK_DDR1#

    SDVO_CTRLDATA

    PLT_RST#11,15,16,18,19

    MCH_BSEL15

    PM_EXTTS1#_R

    DMI_RXP3

    Minimize REFSETrouting length andshield with VSS

    PM_BMBUSY #16

    MCH_CFG20

    C102 0.1U_16V_04

    R247 0_04

    M_CKE3 10

    Only SDVO or PCIex1 is operational

    3.3VS

    SDVOB_BLUE# 11PM_EXTTS0#

    M_CLK_DDR2

    PM_EXTTS1#

    R29

    1K_1%_06

    Calistoga 2/5 B - 7

  • Schematic DiagramsB

    .Sch

    emat

    ic D

    iagr

    ams

    Calistoga 3/5 DDR

    Sheet 7 of 38Calistoga 3/5 DDR

    M_B_CAS# 10

    M_A_A[13:0] 10

    M_B_DQ59

    M_B_DQ27

    M_A_BS0# 10

    M_A_DQ24

    M_A_DQ29

    M_A_DM7 10

    M_B_DQ24

    M_A_DQ55

    M_A_DQ63

    M_A_DQ38

    M_A_DQ[63:0]10

    M_B_DQ8

    M_B_DQS5# 10

    M_B_DQ0

    M_A_DQ45

    M_B_DM0 10

    M_A_DQ9

    M_B_DQ63

    M_A_DQS6# 10

    M_B_A2

    M_A_DQ4

    M_B_DQ12

    M_A_A9

    M_A_DQ30

    DDR SYSTEM MEMORY B

    U3E

    CALISTOGA

    AK39AJ37AP39AR41AJ38AK38AN41AP41AT40AV41AU38AV38AP38AR40AW 38AY 38BA38AV36AR36AP36BA36AU36AP35AP34AY 33BA33AT31AU29AU31AW 31AV29

    AW 29AM19AL19AP14AN14AN17AM16AP15AL15AJ11AH10

    AJ9AN10AK13AH11AK10

    AJ8BA10

    AW 10BA4

    AW4AY 10

    AY9AW5AY5AV4AR5AK4AK3AT4AK5AJ5AJ3

    AT24AV23AY 28

    AR24AK36AR38AT36BA31AL17AH8BA5AN4

    AM39AT39AU35AR29AR16AR10AR7AN5AM40AU39AT35AP29AP16AT10AT7AP5

    AY 23AW24AY 24AR28AT27AT28AU27AV28AV27AW27AV24BA27AY 27AR23

    AU23AK16AK18AR27

    SB_DQ0SB_DQ1SB_DQ2SB_DQ3SB_DQ4SB_DQ5SB_DQ6SB_DQ7SB_DQ8SB_DQ9SB_DQ10SB_DQ11SB_DQ12SB_DQ13SB_DQ14SB_DQ15SB_DQ16SB_DQ17SB_DQ18SB_DQ19SB_DQ20SB_DQ21SB_DQ22SB_DQ23SB_DQ24SB_DQ25SB_DQ26SB_DQ27SB_DQ28SB_DQ29SB_DQ30SB_DQ31SB_DQ32SB_DQ33SB_DQ34SB_DQ35SB_DQ36SB_DQ37SB_DQ38SB_DQ39SB_DQ40SB_DQ41SB_DQ42SB_DQ43SB_DQ44SB_DQ45SB_DQ46SB_DQ47SB_DQ48SB_DQ49SB_DQ50SB_DQ51SB_DQ52SB_DQ53SB_DQ54SB_DQ55SB_DQ56SB_DQ57SB_DQ58SB_DQ59SB_DQ60SB_DQ61SB_DQ62SB_DQ63

    SB_BS_0SB_BS_1SB_BS_2

    SB_CAS#SB_DM_0SB_DM_1SB_DM_2SB_DM_3SB_DM_4SB_DM_5SB_DM_6SB_DM_7

    SB_DQS_0SB_DQS_1SB_DQS_2SB_DQS_3SB_DQS_4SB_DQS_5SB_DQS_6SB_DQS_7

    SB_DQS#_0SB_DQS#_1SB_DQS#_2SB_DQS#_3SB_DQS#_4SB_DQS#_5SB_DQS#_6SB_DQS#_7

    SB_MA_0SB_MA_1SB_MA_2SB_MA_3SB_MA_4SB_MA_5SB_MA_6SB_MA_7SB_MA_8SB_MA_9

    SB_MA_10SB_MA_11SB_MA_12SB_MA_13

    SB_RAS#SB_RCVENIN#

    SB_RCVENOUT#SB_WE#

    M_B_DQS7 10

    M_B_DQS2 10

    M_A_DQ11

    M_B_DQS1 10

    M_A_DQS1# 10

    M_B_DQ55

    M_B_BS0# 10

    M_A_DQS4 10

    M_B_DQ53

    M_A_DQ44

    M_A_A0

    M_A_A13

    M_A_A4M_B_DQ36

    M_B_A9

    M_A_DQ28

    M_A_DQS1 10

    M_B_DQ22

    M_B_DQ62

    M_A_DQ48

    M_B_DQ46

    M_A_DQ36

    M_A_DM5 10

    M_B_DQ25

    M_A_DQS7 10

    M_B_A6M_A_DQ39

    M_A_DQ52

    M_A_DQ10

    M_A_DQ7

    M_B_DQ32

    M_A_DQS4# 10

    M_B_DQ23

    M_A_DQ16

    M_A_DQS5 10

    M_A_DQ40

    M_B_DQ2

    M_A_DQ61

    M_A_A5

    M_A_DM4 10

    M_B_A7

    M_B_DM5 10

    M_B_DQS4# 10

    M_B_DQ5

    M_B_DQ48

    M_A_A2

    M_A_DQ49

    M_A_A7

    M_B_A4

    M_B_DQ52

    M_A_DQ43

    M_A_DQ25

    M_B_BS2# 10

    M_A_DQS3 10

    M_B_DQ7

    M_B_DM7 10

    M_A_DQS7# 10

    M_B_DQS3# 10

    M_B_DQ1

    M_B_DQ21

    M_B_DQ49

    M_A_DQ53

    M_B_DQS7# 10

    M_B_DQ38

    M_A_DQ62

    M_B_DQS6# 10

    M_B_DQ4

    M_A_DQ15

    M_B_DQ50

    M_B_DQ30

    M_A_DQ47

    M_A_DQ1

    M_B_DQ51

    M_A_DQ12

    M_A_DQ57

    M_B_DQ43

    M_A_DQ59

    M_A_DQ31

    M_A_DQS2 10

    M_B_DQ34

    M_A_DQ42

    M_A_DM3 10M_A_DM2 10

    M_B_DQS0 10

    M_B_DQ45

    M_A_DQ5

    M_A_DQ17

    M_B_DQS1# 10

    M_B_DQ6

    M_A_A3

    M_A_DQ60

    M_B_A1

    M_A_A11

    M_A_CAS# 10

    M_B_DQ47M_A_DQ46

    M_B_DQ40

    M_B_DQ9

    M_B_A11

    M_B_DQ35

    M_A_BS2# 10

    M_A_DQS0# 10

    M_A_A6

    M_B_DQ10M_B_DQ11

    M_B_DQS0# 10

    M_B_A5

    M_B_DQ26

    M_A_DQ21

    M_B_DM4 10

    M_A_DM1 10

    M_B_DQS3 10

    M_B_DQ29

    M_A_DQ54

    M_A_DQ2

    M_A_DM6 10

    M_A_DQ14

    M_A_RAS# 10

    M_B_DQS5 10

    M_B_DQ14

    M_B_DQ3

    M_B_DQ37

    M_B_DQ20

    M_A_DQ6

    M_A_DQ58

    M_A_DQS5# 10

    M_B_DQ61

    M_B_DQ33

    M_B_DQ39

    M_A_DQ32

    M_B_DM3 10

    M_B_DQ19

    M_A_DQ26

    M_A_A10

    M_B_DM6 10

    M_B_A[13:0] 10

    M_A_DQ35

    M_B_WE# 10

    M_B_DQ16

    M_A_DQ13

    M_A_DQS6 10

    M_B_DQ44

    M_A_DQ23

    M_B_DM1 10

    M_B_DQ58

    M_B_DQ13

    DDR SYSTEM MEMORY A

    U3D

    CALISTOGA

    AJ35AJ34AM31AM33AJ36AK35AJ32AH31AN35AP33AR31AP31AN38AM36AM34AN33AK26AL27AM26AN24AK28AL28AM24AP26AP23AL22AP21AN20AL23AP24AP20AT21AR12AR14AP13AP12AT13AT12AL14AL12AK9AN7AK8AK7AP9AN9AT5AL5AY 2AW2AP1AN2AV2AT3AN1AL2AG7AF9AG4AF6AG9AH6AF4AF8

    AU12AV14BA20

    AY 13AJ33AM35AL26AN22AM14AL9AR3

    AK33AT33AN28AM22AN12AN8AP3AG5

    AH4

    AK32AU33AN27AM21AM12AL8AN3AH5

    AY 16AU14AW16BA16BA17AU16AV17AU17AW17AT16AU13AT17AV20AV12

    AW14AK23AK24AY 14

    SA_DQ0SA_DQ1SA_DQ2SA_DQ3SA_DQ4SA_DQ5SA_DQ6SA_DQ7SA_DQ8SA_DQ9SA_DQ10SA_DQ11SA_DQ12SA_DQ13SA_DQ14SA_DQ15SA_DQ16SA_DQ17SA_DQ18SA_DQ19SA_DQ20SA_DQ21SA_DQ22SA_DQ23SA_DQ24SA_DQ25SA_DQ26SA_DQ27SA_DQ28SA_DQ29SA_DQ30SA_DQ31SA_DQ32SA_DQ33SA_DQ34SA_DQ35SA_DQ36SA_DQ37SA_DQ38SA_DQ39SA_DQ40SA_DQ41SA_DQ42SA_DQ43SA_DQ44SA_DQ45SA_DQ46SA_DQ47SA_DQ48SA_DQ49SA_DQ50SA_DQ51SA_DQ52SA_DQ53SA_DQ54SA_DQ55SA_DQ56SA_DQ57SA_DQ58SA_DQ59SA_DQ60SA_DQ61SA_DQ62SA_DQ63

    SA_BS_0SA_BS_1SA_BS_2

    SA_CAS#SA_DM_0SA_DM_1SA_DM_2SA_DM_3SA_DM_4SA_DM_5SA_DM_6

    SA_DQS_0SA_DQS_1SA_DQS_2SA_DQS_3SA_DQS_4SA_DQS_5SA_DQS_6SA_DQS_7

    SA_DM_7

    SA_DQS#_0SA_DQS#_1SA_DQS#_2SA_DQS#_3SA_DQS#_4SA_DQS#_5SA_DQS#_6SA_DQS#_7

    SA_MA_0SA_MA_1SA_MA_2SA_MA_3SA_MA_4SA_MA_5SA_MA_6SA_MA_7SA_MA_8SA_MA_9

    SA_MA_10SA_MA_11SA_MA_12SA_MA_13

    SA_RAS#SA_RCVENIN#

    SA_RCVENOUT#SA_W E#

    M_A_DM0 10

    M_B_DQ[63:0]10

    M_A_DQ51

    M_B_DQS4 10

    M_B_DQ15

    M_A_DQ8

    M_B_RAS# 10

    M_B_BS1# 10

    M_A_A12M_B_A12

    M_A_DQ22

    M_A_DQ18

    M_B_DM2 10

    M_B_DQ28

    M_A_DQ50

    M_A_DQ56

    M_B_A0

    M_B_A8

    M_A_WE# 10

    M_B_DQ31

    M_B_DQ54

    M_A_DQ41

    M_A_BS1# 10

    M_B_DQS2# 10

    M_A_A8

    M_A_DQS2# 10

    M_B_DQ17

    M_A_DQ33

    M_B_DQ42

    M_A_DQ3

    M_A_DQ37

    M_A_DQ0

    M_B_DQ60

    M_A_DQ27

    M_B_DQ41M_B_A10

    M_A_DQ19

    M_A_DQS0 10

    M_A_DQ34

    M_B_DQS6 10

    M_B_DQ57

    M_B_DQ18

    M_B_A13

    M_A_DQ20

    M_B_DQ56

    M_A_DQS3# 10

    M_A_A1

    M_B_A3

    B - 8 Calistoga 3/5 DDR

  • Schematic DiagramsB

    .Schematic D

    iagrams

    Calistoga 4/5

    Sheet 8 of 38Calistoga 4/5

    C355

    0.1UF_X7R_04

    Layout Note:

    C374

    0.1UF_X7R_04

    1.5VS

    C33

    0.47U_10V_06

    C406

    0.22U_16V_06

    C360

    0.1UF_X7R_04

    +C107

    470U_2.5V_D

    C89

    0.22U_16V_06

    C48

    0.47U_10V_06

    1.05VS

    C105

    10U_10V_08

    C341

    0.1UF_X7R_04

    C366

    0.1UF_X7R_04

    Co-layout

    C344

    0.47U_10V_06

    C81

    1U_X5R_06

    +C279

    *330U_2.5V_D

    C56

    0.47U_10V_06

    C283

    10U_10V_08

    1.5VS

    C371

    0.1UF_X7R_04

    C9

    0.1U_X7R_04

    VCC

    U3G

    CALISTOGA

    AA33W33P33N33L33J33

    AA32Y 32W32V32P32N32M32L32J32

    AA31W31V31T31R31P31N31M31

    AA30Y 30W30V30U30T30R30P30N30M30L30

    AA29Y 29W29V29U29R29P29M29L29

    AB28AA28Y 28V28U28T28R28P28N28M28L28P27N27M27L27P26N26L26N25M25L25P24N24M24

    AB23AA23Y 23P23N23M23L23

    AC22AB22Y 22W22P22N22M22L22

    AC21AA21W21N21M21L21

    AC20AB20Y 20W20P20N20M20L20

    AB19AA19Y 19N19M19L19N18M18

    AU41AT41AM41AU40BA34AY 34AW34AV34AU34AT34AR34BA30AY 30AW30AV30AU30AT30AR30AP30AN30AM30AM29AL29AK29AJ29AH29AJ28AH28AJ27AH27BA26AY 26AW26AV26AU26AT26AR26AJ26AH26AJ25AH25AJ24AH24BA23AJ23BA22AY 22AW22AV22AU22AT22AR22AP22AK22AJ22AK21AK20BA19AY 19AW19AV19AU19AT19AR19AP19AK19AJ19AJ18AJ17AH17AJ16AH16BA15AY 15AW15AV15AU15AT15AR15AJ15AJ14AJ13AH13AK12AJ12AH12AG12AK11BA8AY 8AW8AV8AT8AR8AP8BA6AY 6AW6AV6AT6AR6AP6AN6AL6AK6AJ6AV1AJ1

    L18P17N17M17N16M16L16

    VCC_0VCC_1VCC_2VCC_3VCC_4VCC_5VCC_6VCC_7VCC_8VCC_9VCC_10VCC_11VCC_12VCC_13VCC_14VCC_15VCC_16VCC_17VCC_18VCC_19VCC_20VCC_21VCC_22VCC_23VCC_24VCC_25VCC_26VCC_27VCC_28VCC_29VCC_30VCC_31VCC_32VCC_33VCC_34VCC_35VCC_36VCC_37VCC_38VCC_39VCC_40VCC_41VCC_42VCC_43VCC_44VCC_45VCC_46VCC_47VCC_48VCC_49VCC_50VCC_51VCC_52VCC_53VCC_54VCC_55VCC_56VCC_57VCC_58VCC_59VCC_60VCC_61VCC_62VCC_63VCC_64VCC_65VCC_66VCC_67VCC_68VCC_69VCC_70VCC_71VCC_72VCC_73VCC_74VCC_75VCC_76VCC_77VCC_78VCC_79VCC_80VCC_81VCC_82VCC_83VCC_84VCC_85VCC_86VCC_87VCC_88VCC_89VCC_90VCC_91VCC_92VCC_93VCC_94VCC_95VCC_96VCC_97VCC_98VCC_99VCC_100VCC_101VCC_102VCC_103

    VCC_SM_0VCC_SM_1VCC_SM_2VCC_SM_3VCC_SM_4VCC_SM_5VCC_SM_6VCC_SM_7VCC_SM_8VCC_SM_9

    VCC_SM_10VCC_SM_11VCC_SM_12VCC_SM_13VCC_SM_14VCC_SM_15VCC_SM_16VCC_SM_17VCC_SM_18VCC_SM_19VCC_SM_20VCC_SM_21VCC_SM_22VCC_SM_23VCC_SM_24VCC_SM_25VCC_SM_26VCC_SM_27VCC_SM_28VCC_SM_29VCC_SM_30VCC_SM_31VCC_SM_32VCC_SM_33VCC_SM_34VCC_SM_35VCC_SM_36VCC_SM_37VCC_SM_38VCC_SM_39VCC_SM_40VCC_SM_41VCC_SM_42VCC_SM_43VCC_SM_44VCC_SM_45VCC_SM_46VCC_SM_47VCC_SM_48VCC_SM_49VCC_SM_50VCC_SM_51VCC_SM_52VCC_SM_53VCC_SM_54VCC_SM_55VCC_SM_56VCC_SM_57VCC_SM_58VCC_SM_59VCC_SM_60VCC_SM_61VCC_SM_62VCC_SM_63VCC_SM_64VCC_SM_65VCC_SM_66VCC_SM_67VCC_SM_68VCC_SM_69VCC_SM_70VCC_SM_71VCC_SM_72VCC_SM_73VCC_SM_74VCC_SM_75VCC_SM_76VCC_SM_77VCC_SM_78VCC_SM_79VCC_SM_80VCC_SM_81VCC_SM_82VCC_SM_83VCC_SM_84VCC_SM_85VCC_SM_86VCC_SM_87VCC_SM_88VCC_SM_89VCC_SM_90VCC_SM_91VCC_SM_92VCC_SM_93VCC_SM_94VCC_SM_95VCC_SM_96VCC_SM_97VCC_SM_98VCC_SM_99

    VCC_SM_100VCC_SM_101VCC_SM_102VCC_SM_103VCC_SM_104VCC_SM_105VCC_SM_106VCC_SM_107

    VCC_104VCC_105VCC_106VCC_107VCC_108VCC_109VCC_110

    VSS

    U3J

    CALISTOGA

    AT23AN23AM23AH23AC23W23K23J23F23C23

    AA22K22G22F22E22D22A22

    BA21AV21AR21AN21AL21AB21Y 21P21K21J21H21C21

    AW20AR20AM20AA20

    K20B20A20

    AN19AC19W19K19G19C19

    AH18P18H18D18A18

    AY 17AR17AP17AM17AK17AV16AN16AL16

    J16F16C16

    AN15AM15AK15N15M15L15B15A15

    BA14AT14AK14AD14AA14U14K14H14E14

    AV13AR13AN13AM13AL13AG13

    P13F13D13B13

    AY 12AC12

    K12H12E12

    AD11AA11Y 11

    J11D11B11AV10

    AW9AR9AH9AB9Y 9R9G9E9A9AG8AD8AA8U8K8C8BA7AV7AP7AL7AJ7AH7AF7AC7R7G7D7AG6AD6AB6Y 6U6N6K6H6B6AV5AF5AD5AY 4AR4AP4AL4AJ4Y 4U4R4J4F4C4AY 3AW3AV3AL3AH3AG3AF3AD3AC3AA3G3AT2AR2AP2AK2AJ2AD2AB2Y 2U2T2N2J2

    AG10AC10W10U10BA9

    AL10AJ10

    AP10

    H2F2C2AL1

    VSS_180VSS_181VSS_182VSS_183VSS_184VSS_185VSS_186VSS_187VSS_188VSS_189VSS_190VSS_191VSS_192VSS_193VSS_194VSS_195VSS_196VSS_197VSS_198VSS_199VSS_200VSS_201VSS_202VSS_203VSS_204VSS_205VSS_206VSS_207VSS_208VSS_209VSS_210VSS_211VSS_212VSS_213VSS_214VSS_215VSS_216VSS_217VSS_218VSS_219VSS_220VSS_221VSS_222VSS_223VSS_224VSS_225VSS_226VSS_227VSS_228VSS_229VSS_230VSS_231VSS_232VSS_233VSS_234VSS_235VSS_236VSS_237VSS_238VSS_239VSS_240VSS_241VSS_242VSS_243VSS_244VSS_245VSS_246VSS_247VSS_248VSS_249VSS_250VSS_251VSS_252VSS_253VSS_254VSS_255VSS_256VSS_257VSS_258VSS_259VSS_260VSS_261VSS_262VSS_263VSS_264VSS_265VSS_266VSS_267VSS_268VSS_269VSS_270VSS_271VSS_272

    VSS_273VSS_274VSS_275VSS_276

    VSS_285VSS_286VSS_287VSS_288VSS_289VSS_290VSS_291VSS_292VSS_293VSS_294VSS_295VSS_296VSS_297VSS_298VSS_299VSS_300VSS_301VSS_302VSS_303VSS_304VSS_305VSS_306VSS_307VSS_308VSS_309VSS_310VSS_311VSS_312VSS_313VSS_314VSS_315VSS_316VSS_317VSS_318VSS_319VSS_320VSS_321VSS_322VSS_323VSS_324VSS_325VSS_326VSS_327VSS_328VSS_329VSS_330VSS_331VSS_332VSS_333VSS_334VSS_335VSS_336VSS_337VSS_338VSS_339VSS_340VSS_341VSS_342VSS_343VSS_344VSS_345VSS_346VSS_347VSS_348VSS_349VSS_350VSS_351VSS_352VSS_353VSS_354VSS_355VSS_356

    VSS_280VSS_281VSS_282VSS_283VSS_284

    VSS_278VSS_279

    VSS_277

    VSS_357VSS_358VSS_359VSS_360

    C4

    10U_10V_08

    1.8V

    C349

    0.1UF_X7R_04

    1.8V

    C46

    0.47U_10V_06

    1.05VS

    C336

    10U_10V_08

    C356

    0.1UF_X7R_04

    C367

    0.1UF_X7R_04

    C378

    0.1UF_X7R_04

    C287

    0.47U_10V_06

    C100

    10U_10V_08

    C375

    0.1UF_X7R_04

    +C315

    220U_2.5V_B

    near pin BA15

    VSS

    U3I

    CALISTOGA

    AC41AA41W41T41P41M41J41F41

    AV40AP40AN40AK40AJ40

    AH40AG40AF40AE40

    B40AY 39AW39AV39AR39AN39AJ39

    AC39AB39AA39

    Y 39W39V39T39R39P39N39M39L39J39H39G39F39D39

    AT38AM38AH38AG38AF38AE38

    C38AK37AH37AB37AA37

    Y 37W37V37T37R37P37N37M37L37J37H37G37F37D37

    AY 36AW36AN36AH36AG36AF36AE36AC36

    C36B36

    BA35AV35AR35AH35AB35AA35

    Y 35W35V35T35R35P35

    AF34AE34AC34C34AW33AV33AR33AE33AB33Y 33V33T33R33M33H33G33F33D33B33AH32AG32AF32AE32AC32AB32G32B32AY 31AV31AN31AJ31AG31AB31Y 31AB30E30AT29AN29AB29T29N29K29G29E29C29B29A29BA28AW28AU28AP28AM28AD28AC28W28J28E28AP27AM27AK27J27G27F27C27B27AN26M26K26F26D26AK25P25K25H25E25D25A25BA24AU24AL24AW23

    N35M35L35J35H35G35F35D35

    AN34

    AK34AG34VSS_0

    VSS_1VSS_2VSS_3VSS_4VSS_5VSS_6VSS_7VSS_8VSS_9VSS_10VSS_11VSS_12VSS_13VSS_14VSS_15VSS_16VSS_17VSS_18VSS_19VSS_20VSS_21VSS_22VSS_23VSS_24VSS_25VSS_26VSS_27VSS_28VSS_29VSS_30VSS_31VSS_32VSS_33VSS_34VSS_35VSS_36VSS_37VSS_38VSS_39VSS_40VSS_41VSS_42VSS_43VSS_44VSS_45VSS_46VSS_47VSS_48VSS_49VSS_50VSS_51VSS_52VSS_53VSS_54VSS_55VSS_56VSS_57VSS_58VSS_59VSS_60VSS_61VSS_62VSS_63VSS_64VSS_65VSS_66VSS_67VSS_68VSS_69VSS_70VSS_71VSS_72VSS_73VSS_74VSS_75VSS_76VSS_77VSS_78VSS_79VSS_80VSS_81VSS_8