Top Banner
Ceramic Filters (CERAFILr)/ Crystal Filters P51E.pdf Dec.25,2015
63

Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Jan 24, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Filters (CERAFILr)/Crystal Filters

P51E.pdfDec.25,2015

Page 2: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

EU RoHS Compliant

For r o ur'Mur A ro c o '

-

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

P51E.pdfDec.25,2015

Page 3: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Contents

Ceramic Filters (CERAFILr) Chip Type SFSKB SeriesFeatures/Applications/Appearance/Dimensions p34

Part Number List p34

Standard Land Pattern Dimensions p35

Test Circuit p35

Frequency Characteristics p36

Spurious p37

Notice p38

Packaging p40

Please check the MURATA website (http://www.murata.com/) if you cannot find the part number in the catalog.

5

Ceramic Trap (CERAFILr) Chip Type TPSKA SeriesFeatures/Appearance/Dimensions p41

Part Number List p41

Standard Land Pattern Dimensions p41

Test Circuit p41

Frequency Characteristics p41

Spurious p42

Notice p43

Packaging p45

6

Ceramic Discriminator (CERAFILr) Chip Type CDSCB SeriesFeatures/Appearance/Dimensions p46

Part Number List p46

Standard Center Frequency Rank Code p46

Standard Land Pattern Dimensions p47

Test Circuit p47

Recovered Audio Curve p49

S Curve p50

Notice p51

Packaging p53

7

Crystal Filters Chip Type XDCAF/XDCAG/XDCAH SeriesFeatures/Applications/Appearance/Dimensions p54

Series/Part Number List p54

Test Circuit p55

Frequency Characteristics p56

Spurious p57

Notice p58

Packaging p60

8

Selection Guide p2

Part Numbering p3

Ceramic Filters (CERAFILr) Chip Type SFECF SeriesFeatures/Appearance/Dimensions p6

Part Number List p6

Standard Center Frequency Rank Code p7

Standard Land Pattern Dimensions p7

Test Circuit p7

Frequency Characteristics p8

Spurious p10

Notice p12

Packaging p14

1

Ceramic Filters (CERAFILr) Chip Type SFECV/SFECK SeriesFeatures/Applications/Appearance/Dimensions p15

Part Number List p15

Standard Center Frequency Rank Code p16

Standard Land Pattern Dimensions p16

Test Circuit p16

Frequency Characteristics p16

Spurious p17

Notice p18

Packaging p20

2

Ceramic Filters (CERAFILr) Chip Type SFSCE SeriesFeatures/Applications/Appearance/Dimensions p21

Part Number List p21

Standard Land Pattern Dimensions p21

Test Circuit p21

Frequency Characteristics p22

Notice p23

Packaging p27

3

Ceramic Filters (CERAFILr) Chip Type SFSKA SeriesFeatures/Appearance/Dimensions p28

Part Number List p28

Standard Land Pattern Dimensions p28

Test Circuit p28

Frequency Characteristics p29

Spurious p30

Notice p31

Packaging p33

4

Product specifications are as of December 2015.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

1

2

3

4

5

6

7

8

Page 4: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Selection Guides

4 pole7.0×5.0×1.1mm

XDCAH

4 pole7.0×5.0×1.1mm

XDCAG

2 pole7.0×5.0×1.1mm

XDCAF

Crystal Filters

Industrial

10.520-10.800MHz4.5×2.0×1.0mm

CDSCB

Discriminators

4.500-6.500MHz8.5×3.8×2.0mm

TPSKA

Traps

2.300-5.700MHz5.2×3.8×1.5mm

SFSKB

4.500-6.500MHz8.5×3.8×2.0mm

SFSKA

10.700-11.000MHz4.5×3.8×1.0mm

SFSCE

10.700-15.000MHz6.9×2.9×1.7mm

SFECV/SFECK

10.000-11.000MHz3.45×3.1×1.4mm

SFECF

Filters

Audio Visual/Communications

Applications

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

2

Page 5: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

3

o Part Numbering

3

CF2

E7

A01

SF5

F4

10M76

A8

-R0(Part Number)

1Product ID

2Oscillation/Number of Elements

CERAFILr for FM

SF Ceramic Filters

Product ID

p is "A" or subsequent code, which indicates the structure/size.

3Structure/Size Bulk

Embossed Taping ø180mm

Embossed Taping ø330mm

8Packaging

-B0-R0-R1

Code Packaging

Radial taping is applied to lead type and embossed taping to chip type.

With non-standard products, two-digit alphanumerics indicating

"Individual Specification" are added between "7Series" and

"8Packaging."

3dB bandwidth of "F" signifies the frequency difference (both + and -)

from reference frequency, which is nominal center frequency.

2 Elements Thickness Expander Mode

3 Elements Thickness Expander Mode

2 Elements Thickness Expander Mode

(2nd Harmonic)

2 Elements Thickness Expander Mode

(3rd Overtone)

ET

V

K

Code Oscillation/Number of Elements

Chip TypeCpCode Structure/Size

4Nominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

53dB Bandwidth

CDEFGHJKLMN

450kHz min

350kHz min

330kHz

280kHz

230kHz

180kHz

150kHz

110kHz

80kHz

50kHz

35kHz

Code 3dB Bandwidth

7Series

A0 Two-digit Alphanumerics Express Series

Code Series

6Center Frequency/Tolerance

AF

Center Frequency Mentioned by Specification

Nominal Center Frequency

Code Center Frequency

±30kHz

Tolerance

Page 6: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

4

CERAFILr

7

-R13

KA2

S4

4M506

005

CF1

SF(Part Number)

1Product ID

2Oscillation/Numbers of Element

SF Ceramic Filters

Product ID

5Product Specification Code (1)

BFCFDFEF

Code Product Specification Code (1)

With non-standard products, two-digit alphanumerics indicating

"Individual Specification" is added between "6Product Specification

Code (2)" and "7Packaging."

3Structure/Size

Bulk

Embossed Taping ø=330mm

Tight Bandwidth Type

Standard Bandwidth Type

Broad Bandwidth Type

Ultra-broad Bandwidth Type

6Product Specification Code (2)

00Code Product Specification Code (2)

Standard Type

7Packaging

-B0-R1

Code Packaging

2 Elements Thickness Shear ModeSCode Oscillation/Numbers of Element

Chip TypeKpCode Structure/Size

p is "A" or subsequent code, which indicates the structure/size.

4Nominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

Ceramic Traps

6

007

-R03

KA2

S4

4M005

B1

TP(Part Number)

1Product ID

2Function

TP Ceramic Traps

Product ID

5Product Specification Code (1)

BC

Code Product Specification (1)

With non-standard products, three-digit alphanumerics indicating

"Individual Specification" is added between "6Product Specification

Code (2)" and "7Packaging."

3Structure/Size

Bulk

Embossed Taping ø=330mm

Broad Bandwidth Type

Low Capacitance Type

6Product Specification Code (2)

00Code Product Specification (2)

Standard Type

7Packaging

-B0-R1

Code Packaging

Single TrapsSCode Function

Chip TypeKpCode Structure/Size

p is "A" or subsequent code, which indicates the structure/size.

4Nominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

CERAFILr

Page 7: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

5

1Product ID

2Type · Lead Style

4Structure

8Individual Specification

9Packaging (Packging quantity is expressed by one-digit number in "*")

Crystal Filter

XD Crystal Filter

C Monolithic SMD

Product ID

Code Type · Lead Style

(Part Number)

6Bandwidth

Expressed by one-digit alphabet.

5Nominal Center Frequency

Expressed by six-digit alphanumeric. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M".

3Size

A 7050

Code Size

MPQR

Bandwidth (3dB)Code

6.800 to 8.199kHz

10.000 to 11.999kHz

12.000 to 14.999kHz

15.000 to 17.999kHz

7Number of Pole

AGH

Number of PoleCode

2 (1 Element)

4 (1 Element)

4 (2 Elements)

***

Code

Three-digit Alphanumeric Express

Individual Specification.

P*/L*

PackagingCode

Plastic Taping ø330mm

8

A002

C5

21M4009

P0XD1 3

A4

F7

A6

R

3

CB2

S4

10M78

-R07

0011

CD5

G6

A(Part Number)

1Product ID

2Oscillation

Discriminators for FM

CD Discriminators

Product ID

Radial taping is applied to lead type and embossed taping to chip type.

With non-standard products, an alphanumerics indicating "Individual

Specification" is added between "7IC" and "8Packaging."

3Structure/Size

Bulk

Embossed Taping ø=180mm

Embossed Taping ø=330mm

7IC

001Code IC

Applicable IC Control Code

8Packaging

-B0-R0-R1

Code Packaging

Thickness Shear ModeSCode Oscillation

Chip TypeCpCode Structure/Size

p is "A" or subsequent code, which indicates the structure/size.

4Nominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

5Series

G Two-digit Alphanumerics Express Series

Code Series

6Center Frequency/Tolerance

AF

Center Frequency Mentioned by Specification

Nominal Center Frequency

Code Center Frequency

±30kHz

Tolerance

3dB bandwidth of "F" signifies the frequency difference (both + and -)

from reference frequency, which is nominal center frequency.

Page 8: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Filters (CERAFILr)Chip Type SFECF Series

RoHS

The SFECF10M7 series for FM receivers are small, high-performance and super thin (1.4mm max.) filters. The piezoelectric element is sandwiched by ceramic substrate. They have 1.4mm max. thickness and a small mounting area (3.45x3.1mm). The SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS sets very thin and small.

Features

1. The filters are mountable by automatic placers.2. They are slim, at only 1.4mm max. thickness, and have a

small mounting area (3.45x3.1mm) enabling flexible PCB design.

3. Various bandwidths are available. Select a suitable type in accordance with the desired characteristics.

4. Operating Temperature Range: -20 to +80°C (Standard Type) -40 to +85°C (High-reliability Type) Storage Temperature Range: -40 to +85°C (Standard Type) -55 to +85°C (High-reliability Type)

0.75

±0.3

(in mm)

1.3±0.1

3.1±

0.2

3.45±0.2

(0.6)(0.6) (0.6)

(1.28)(1.28)

0 to 0.4

(6)

(1.28)(1.28)

0.65±0.3

0.85

±0.3

0.85

±0.3

0 to 0.35 0 to 0.35

0 to 0.4

(5) (4)(1) (2) (3)

0.65±0.30.3 min.0.3 min.

: EIAJ Monthly Code: Reference( )

(1): Input(2)(5): Ground(3)(4): No connection

(6): Output

0.7±0.3

Input electrode marker

Part NumberCenter

Frequency(fo) (MHz)

Nominal CenterFrequency (fn)

(MHz)

3dBBandwidth

(kHz)Attenuation

(kHz)Insertion Loss

(dB)Ripple

(dB)Spurious

Attenuation(1) (dB)

SpuriousAttenuation

(2) (dB)

Input/OutputImpedance

(ohm)

SFECF10M7HA00-R0 10.700±30kHz - 180 ±40kHz 470 max. 4.0±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7HF00-R0 - 10.700 fn±25 min. 510 max. 8.0max. [at fn] 1.0 max. 30 min.

[within 9MHz to fn]25 min.

[within fn to 12MHz] 330

SFECF10M7GA00-R0 10.700±30kHz - 230 ±50kHz 510 max. 3.5±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7GF00-R0 - 10.700 fn±45 min. 560 max. 8.0max. [at fn] 1.0 max. 30 min.

[within 9MHz to fn]25 min.

[within fn to 12MHz] 330

SFECF10M7FA00-R0 10.700±30kHz - 280 ±50kHz 590 max. 3.0±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7FF00-R0 - 10.700 fn±65 min. 620 max. 7.0max. [at fn] 1.0 max. 30 min.

[within 9MHz to fn]25 min.

[within fn to 12MHz] 330

SFECF10M7EA00-R0 10.700±30kHz - 330 ±50kHz 700 max. 3.0±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7DA0001-R0 10.700±30kHz - 420 min. 950 max. 3.0±2.0dB 3.0 max. 35 min.

[within 9MHz to fo]25 min.

[within fo to 12MHz] 330

SFECF10M7DF00-R0 - 10.700 fn±150 min. 990 max. 6.0max. [at fn] 3.0 max. 20 min.

[within 9MHz to fn]20 min.

[within fn to 12MHz] 330

Area of Attenuation: [within 20dB]Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.Center frequency (fo) defined by the center of 3dB bandwidth.For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

Standard Type

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

6

1

Page 9: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Part NumberCenter

Frequency(fo) (MHz)

Nominal CenterFrequency (fn)

(MHz)

3dBBandwidth

(kHz)Attenuation

(kHz)Insertion Loss

(dB)Ripple

(dB)Spurious

Attenuation(1) (dB)

SpuriousAttenuation

(2) (dB)

Input/OutputImpedance

(ohm)

SFECF10M7HA00S0-R0 10.700±30kHz - 180 ±40kHz 470 max. 4.0±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7HF00S0-R0 - 10.700 fn±25 min. 510 max. 8.0max. [at fn] 1.0 max. 30 min.

[within 9MHz to fn]25 min.

[within fn to 12MHz] 330

SFECF10M7GA00S0-R0 10.700±30kHz - 230 ±50kHz 510 max. 3.5±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7GF00S0-R0 - 10.700 fn±45 min. 560 max. 8.0max. [at fn] 1.0 max. 30 min.

[within 9MHz to fn]25 min.

[within fn to 12MHz] 330

SFECF10M7FA00S0-R0 10.700±30kHz - 280 ±50kHz 590 max. 3.0±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7FF00S0-R0 - 10.700 fn±65 min. 630 max. 7.0max. [at fn] 1.0 max. 30 min.

[within 9MHz to fn]25 min.

[within fn to 12MHz] 330

SFECF10M7EA00S0-R0 10.700±30kHz - 330 ±50kHz 700 max. 3.0±2.0dB 1.0 max. 30 min.

[within 9MHz to fo]30 min.

[within fo to 12MHz] 330

SFECF10M7DF00S0-R0 - 10.700 fn±145 min. 990 max. 6.0max. [at fn] 3.0 max. 20 min.

[within 9MHz to fn]20 min.

[within fn to 12MHz] 330

Area of Attenuation: [within 20dB]Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.Center frequency (fo) defined by the center of 3dB bandwidth.For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

CODEA

30kHz Step10.700MHz±30kHz

25kHz Step10.700MHz±25kHz

Standard Center Frequency Rank Code

Input

Ground

No connection

Output

(1):

(2)(5):

(3)(4):

(6):

(in mm)Indicates solder resist land pattern.

1.0

51

.40

1.0

5

0.1

0.1

0.1

0.1

0.8 0.6 0.8 0.6 0.8

0.10.1

0.3

0.3

0.3

(6) (5) (4)

(1) (2) (3)

Standard Land Pattern Dimensions Test Circuit

High-reliability Type

(1)

(2)

(3)

(6)

(5)

(4)

R2 C2 E2RF

Voltmeter

R1

E1

S.S.G.

Rg

Rg=50Ω R1=280Ω±5% R2=330Ω±5%

C2=10±2pF (Including stray capacitance and Input capacitance

of RF voltmeter)

E1: S.S.G. Output Voltage

: Input

: Ground

: No connection

: Output

(1)

(2)(5)

(3)(4)

(6)

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

7

1

Page 10: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Frequency Characteristics Standard Type

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECF10M7HA00-R0/SFECF10M7HF00-R07.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECF10M7GA00-R0/SFECF10M7GF00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECF10M7FA00-R0/SFECF10M7FF00-R07.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

10.300 10.500 10.700 10.900 11.100

SFECF10M7EA00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECF10M7DA0001-R07.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECF10M7DF00-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

8

1

Page 11: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Frequency Characteristics High-reliability Type

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

enua

tion

(dB)

10.300 10.500 10.700 10.900 11.100

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R07.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

enua

tion

(dB)

10.300 10.500 10.700 10.900 11.100

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

enua

tion

(dB)

10.300 10.500 10.700 10.900 11.100

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R07.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

enua

tion

(dB)

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

10.300 10.500 10.700 10.900 11.100

SFECF10M7EA00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Att

enua

tion

(dB)

10.300 10.500 10.700 10.900 11.100

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

SFECF10M7DF00S0-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

9

1

Page 12: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7HA00-R0/SFECF10M7HF00-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7GA00-R0/SFECF10M7GF00-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7FA00-R0/SFECF10M7FF00-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7EA00-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7DA0001-R0/SFECF10M7DF00-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

10

1

Frequency Characteristics (Spurious) Standard Type

Page 13: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7EA00S0-R0

Frequency (MHz)

Att

enua

tion

(dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7DF00S0-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

11

1

Frequency Characteristics (Spurious) High-reliability Type

Page 14: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for use with placement

machines that employ optical placement capabilities.

The component might be damaged by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines that

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Conditions for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to

degrade. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated on positioning accuracy,

etc. Careful checking and maintenance are necessary

to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. Solder containing Ag should be used to

prevent electrode erosion.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in reflow soldering.

(4) Other

e Soldering and Mounting e

Te

mp

era

ture

(°C

)

100

230

260

30 sec.min.

40 sec.max.

Peak(260°C max.)

Pre-heating(150-180°C)

Heating(230°C)

GradualCooling

120 sec.min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Place the

component

lateral to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Continued on the following page.

Ceramic Filters (CERAFILr) Chip Type SFECF Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

12

1

Page 15: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Storage and Operating Conditions e

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling e1. Accurate test circuit values are required to measure

electrical characteristics. Miscorrelation may be caused if

there is any deviation, especially stray capacitance, from

the test circuit in the specification.

2. The components, packed in a moisture proof bag (dry

pack), are sensitive to moisture. The following treatment

is required before applying reflow soldering, to avoid

reliability degradation caused by thermal stress. When

unpacked, store the component in an atmosphere of

reflow 30°C and below 60%R.H., and solder within 1

week.

1. Product Storage Conditions

Please store the products in a room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because

solderability may be degraded due to storage under poor

conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because quality and solderability may be

degraded due to storage in a chemical atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in places such as a

damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after package is

opened, because quality and solderability may be

degraded due to storage under poor conditions.

(5) To avoid cracking of the ceramic element, please do

not drop the products.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

13

1

Page 16: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Embossed Tape ø180mm2,000

(pcs.)

(in mm)

Dimensions of Reel

ø13.0±0.5

2.0±0.5

240 to 280

400 to 560

160 to 190

EmptyComponents

Cover film

Empty

Trailer Leader

17.0±1.0+1.0-013.0

+0

-1.5

18

0+1

.0-0

60

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

( ): Reference

(in mm)

Dimensions of Carrier Tape

Chip filterø1.55±0.05

User direction of feed

Cover film

Peeling strength

(0.1 to 0.7N)

0.3

±0

.05

1.8

0.1

(0.0

5)

(3°)10° max.

5.5

±0.0

5

4.1

±0

.1

1.7

0.1

ma

x.

4.1±

0.1

4.0±0.1

2.0±0.05

4.0±0.13.35

12

.0±

0.2

+0.1-0.05

Packaging

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

14

1

Page 17: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Filters (CERAFILr)Chip Type SFECV/SFECK Series

RoHS

The SFECV/SFECK10M7 series for FM receivers are monolithic type ceramic filters that utilize the thickness expander mode of piezoelectric ceramics. The SFECV series enable customers to make an AM/FM set very thin, and it can be useful to the total chip circuit.

Features

1. The piezoelectric element is sandwiched by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting.

2. Various bandwidths are available. Select a suitable type in accordance with the desired characteristics.

3. Operating Temperature Range: -20 to +80°C (Standard Type) -40 to +85°C (High-reliability Type) Storage Temperature Range: -40 to +85°C (Standard Type) -55 to +85°C (High-reliability Type)

Applications

1. Small, thin radios2. Automotive radios3. Headphone stereos

6.9±0.3

*

*

*

2.9

±0

.31

.5±

0.2

4.05±0.4

1.2±0.5

1.0±0.5 1.0±0.5

1.2±0.3 1.2±0.5 1.5±0.2

(3) (2) (1)

(1) : Input

(2) : Ground

(3) : Output

** : EIAJ Monthly Code

** : Center Frequency Rank Code

: Marking

(in mm)

1.0±0.5

Part NumberCenter

Frequency(fo) (MHz)

3dBBandwidth

(kHz)Attenuation

(kHz)Insertion Loss

(dB)Ripple

(dB)Spurious

Attenuation(1) (dB)

SpuriousAttenuation

(2) (dB)

Input/OutputImpedance

(ohm)

SFECV15M0EQ0001-R015.000±50kHz 300 min. 750 max. 7.0max. 1.0 max. 30 min.

[within 14MHz to fo]30 min.

[within fo to 16MHz] 330

SFECV10M7KA00-R010.700±30kHz 110 ±30kHz 320 max. 6.0±2.0dB 1.0 max. 35 min.

[within 9MHz to fo]35 min.

[within fo to 12MHz] 330

SFECV10M7JA00-R010.700±30kHz 150 ±40kHz 380 max. 5.5±2.0dB 1.0 max. 35 min.

[within 9MHz to fo]35 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]Area of Insertion Loss: at minimum loss pointCenter frequency (fo) defined by the center of 3dB bandwidth.For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

Part NumberCenter

Frequency(fo) (MHz)

3dBBandwidth

(kHz)Attenuation

(kHz)Insertion Loss

(dB)Ripple

(dB)Spurious

Attenuation(1) (dB)

SpuriousAttenuation

(2) (dB)

Input/OutputImpedance

(ohm)

SFECK10M7KA00S0-R010.700±30kHz 110 ±30kHz 320 max. 6.0±2.0dB 1.0 max. 35 min.

[within 9MHz to fo]35 min.

[within fo to 12MHz] 330

SFECK10M7JA00S0-R010.700±30kHz 150 ±40kHz 380 max. 5.5±2.0dB 1.0 max. 35 min.

[within 9MHz to fo]35 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]Area of Insertion Loss: at minimum loss pointCenter frequency (fo) defined by the center of 3dB bandwidth.For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

Standard Type

High-reliability Type

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

15

2

Page 18: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

CODEA

30kHz Step10.700MHz±30kHz

25kHz Step10.700MHz±25kHz

Standard Center Frequency Rank Code

(in mm)Land

1.2

1.65

2.85 2.85

1.65

1.2 1.2

4.0

Standard Land Pattern Dimensions

(1) (3)

(2)

R2 C2 E2RF

Voltmeter

R1

E1

S.S.G.

=-10dBm

Rg

Rg=50Ω R1=280Ω±5% R2=330Ω±5%

C2=10±2pF (Including stray capacitance and Input capacitance

of RF voltmeter)

E1: S.S.G. Output Voltage

(1): Input

(2): Ground

(3): Output

Test Circuit

10.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

14.700 14.800 14.900 15.000 15.100 15.200 15.300

Gro

up

De

lay

Tim

e (

μ s

ec

.)

0

8.02

6.04

4.06

2.08

0.010

Frequency Characteristics Standard Type

SFECV15M0EQ0001-R0

4.0

3.5

4.5

5.0

5.5

6.0

6.5

7.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECV10M7KA00-R0

8.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

10.300 10.500 10.700 10.900 11.100

Gro

up

De

lay

Tim

e (

μ s

ec

.)

7

6

5

4

3

2

1

0

SFECV10M7JA00-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

16

2

Page 19: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

4.0

3.5

4.5

5.0

5.5

6.0

6.5

7.0

Frequency (MHz)

Att

enua

tion

(dB)

10.300 10.500 10.700 10.900 11.100

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

Frequency Characteristics High-reliability Type

SFECK10M7KA00S0-R08.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Att

enua

tion

(dB)

10.300 10.500 10.700 10.900 11.100

Gro

up D

elay

Tim

e (μ

sec

.)

7

6

5

4

3

2

1

0

SFECK10M7JA00S0-R0

0

70

8013.000 15.00014.000 16.000 17.000

Frequency (MHz)

Att

enua

tion

(dB)

60

50

40

30

20

10

SFECV15M0EQ0001-R0

8.70070

60

50

40

30

20

10

0

9.700 10.700Frequency (MHz)

Att

enua

tion

(dB)

11.700 12.700

SFECV10M7KA00-R0

8.70070

60

50

40

30

20

10

0

9.700 10.700Frequency (MHz)

Att

enua

tion

(dB)

11.700 12.700

SFECV10M7JA00-R0

8.70070

60

50

40

30

20

10

0

9.700 10.700Frequency (MHz)

Att

enua

tion

(dB)

11.700 12.700

SFECK10M7KA00S0-R0

8.70070

60

50

40

30

20

10

0

9.700 10.700Frequency (MHz)

Att

enua

tion

(dB)

11.700 12.700

SFECK10M7JA00S0-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

17

2

Frequency Characteristics (Spurious) Standard Type

Frequency Characteristics (Spurious) High-reliability Type

Page 20: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for use with placement

machines that employ optical placement capabilities.

Damage may result from excessive mechanical force.

Please make sure that you have evaluated by using

placement machines before going into mass production.

Do not use placement machines that utilize mechanical

positioning. Please contact Murata for details beforehand.

(3) Conditions for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to

degrade. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. Solder containing Ag should be used to

prevent electrode erosion.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in reflow soldering.

(4) Other

e Soldering and Mounting e

[Component Direction]

[Component Layout Close to Board]

Put the

component

lateral to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Te

mp

era

ture

(°C

)

100

230

240

30 sec.min.

30 sec.max.

Peak(240°C max.)

Pre-heating(150-180°C)

Heating(230°C)

GradualCooling

120 sec.min.

60-120 sec.

Continued on the following page.

Ceramic Filters (CERAFILr) Chip Type SFECV/SFECK Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

18

2

Page 21: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Storage and Operating Conditions e

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling eAccurate test circuit values are required to measure

electrical characteristics.

Miscorrelation may be caused if there is any deviation,

especially stray capacitance, from the test circuit in the

specification.

1. Product Storage Conditions

Please store the products in room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (Shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because quality and solderability may be

degraded due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such as

a damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after package is

opened, because quality and solderability may be

degraded due to storage under the poor conditions.

(5) To avoid cracking of the ceramic element, please do

not drop the products.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

19

2

Page 22: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

( ) : Reference

(in mm)

1.7

+0

.1–

0.0

5

12

.0±

0.2

0.3

±0

.05

7.3

±0.0

1

5.5

±0.0

51

.75

±0

.11

.9±

0.1

10° max.

Peeling strength 0.1 to 0.7N

Cover film

3.0±0.14.0±0.1

ø1.5+0.1–0.0 2.0±0.05 4.0±0.1

(3°)

*

**

*

**

*

**

*

**

*

**

Embossed Tape ø180mm2,000

(pcs.)

Dimensions of Reel

(in mm)

ø13.0±0.5

2.0±0.5

17.0±1.0

240-280

400-560

160-190

EmptyComponents

Cover film

Empty

Trailer Leader

13.0+1.0–0

18

0+

0–

1.5

60

+1

.0–

0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

20

2

Page 23: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Filters (CERAFILr)Chip Type SFSCE Series

RoHS

The SFSCE series are chip surface mount filters available for 3dB bandwidth at 700kHz to 1.3MHz (more than twice the width compared with current types).They have 1.0mm max. thickness and small mounting area (4.5x3.8mm).

Features

1. The filters are mountable by automatic placers.2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (4.5x3.8mm) enabling flexible PCB design.3. Available lead (Pb) free solder reflow.4. Operating temperature range: -20 to +80°C Storage temperature range: -40 to +85°C

Applications

1. SS digital communication system2. Digital wireless audio3. PHS Evolution system4. RFID Reader Writer5. RKE

(3.5

)

(in mm)

*

0.4

3.8

(1.8

)

4.5(1) (2)

(4)(3)

(4.0)

1.0

ma

x.

0.8

50

.15

0.3

(1)

(2)

(3)

(4)

Tolerance unless

otherwise specified: ±0.1

( )

: Input

: Output

: No Connection

: Ground

: EIAJ Monthly Code

: Reference

*

(2.25)1.10.6 0.15

(4-R0.3)

(0.3)

(1)

(4)

(2)

(3)

Part NumberNominal CenterFrequency (fn)

(MHz)

3dBBandwidth

(kHz)

StopBandwidth

(MHz)Insertion Loss

(dB)Ripple

(dB)SpuriousResponse

(dB)GDT Deviation

(µs)Input/Output

Impedance(ohm)

SFSCE10M7WF03-R0 10.700 fn±500.0min.

2.2 max. (Total)[within 20dB]

6.0 max.[at minimum loss point]

2.0 max.[within 3dB Bandwidth]

30/25 min.[within 5.7MHz to fn / fn to 15.7MHz]

0.6 max.[within fn±400kHz] 470

SFSCE10M7WF04-R0 10.700 fn±400.0min.

1.8 max. (Total)[within 20dB]

6.0 max.[at minimum loss point]

1.5 max.[within 3dB Bandwidth]

35/25 min.[within 5.7MHz to fn / fn to 15.7MHz]

0.6 max.[within fn±325kHz] 470

SFSCE10M7WF05-R0 10.700 fn±325.0min.

1.7 max. (Total)[within 20dB]

6.0 max.[at minimum loss point]

1.5 max.[within 3dB Bandwidth]

40/30 min.[within 5.7MHz to fn / fn to 15.7MHz]

0.6 max.[within fn±250kHz] 470

For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in packaging page in this catalog.

(in mm)Indicates solder resist land pattern.

(1): Input

(2): Output

(3): No Connection

(4): Ground

0.5

0.5

1.4

0.1 0.1

0.1

1.05

(3) (4)

(2) (1)

0.8

1.1

51

.3

R1+Rg=R2=Input/Output Impedance, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1: S.S.G. Output Voltage

(1): Input

(2): Output

(3): No Connection

(4): Ground

RF

Voltmeter

C2R2

R1

Rg

S.S.G.

(4)

(1)

(3)

(2)

Standard Land Pattern Dimensions Test Circuit

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

21

3

Page 24: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

2.0

Frequency (MHz)

Att

en

ua

tio

n (

dB

)

Gro

up

De

lay

Tim

e (

μ s

ec

.)

11.10010.3009.500 11.90011.50010.7009.900

0

1.62

1.24

0.86

0.48

0.010

Frequency Characteristics

SFSCE10M7WF03-R0

Frequency (MHz)

6.700 8.700 10.700 12.700 14.700

Att

en

ua

tio

n (

dB

)

0

20

40

60

80

SFSCE10M7WF03-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

22

3

Page 25: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +280±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for placement

machines that employ optical placement capabilities.

The component might be damaged by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines that

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to

degrade. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated on positioning accuracy,

etc. Careful checking and maintenance are necessary

to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in reflow soldering.

(4) Other

e Soldering and Mounting e

Peak

(240°C max.)

Heating

(230°C)

Gradual

Cooling

Pre-heating

(150-180°C)100

230

240

Te

mp

era

ture

(°C

)

60-120 sec. 30 sec.max.

30 sec.min.

120 sec.min.

[Component Direction]

Place the compon-

ent laterally to the

direction in which

stress acts.

[Component Layout Close to Board]

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Continued on the following page.

SFSCE10M7WF03-R0 Notice

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

23

3

Page 26: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Handling eAccurate test circuit values are required to measure

electrical characteristics. Miscorrelation may be caused if

there is any deviation, especially stray capacitance, from

the test circuit in the specification.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

e Storage and Operating Conditions e1. Product Storage Condition

Please store the products in a room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to + 40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because

solderability may be degraded due to storage under poor

conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because the characteristics may be

reduced in quality and may be degraded in

solderability due to storage in a chemical atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in places such as a

damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality and/or be degraded in

solderability due to storage under poor condition.

(5) Please do not drop the products to avoid cracking of

the ceramic element.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

24

3

Page 27: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +280±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for placement

machines that employ optical placement capabilities.

The component might be damaged by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines that

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to

degrade. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated on positioning accuracy,

etc. Careful checking and maintenance are necessary

to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in reflow soldering.

(4) Other

e Soldering and Mounting e

[Component Direction]

Place the compon-

ent laterally to the

direction in which

stress acts.

[Component Layout Close to Board]

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Peak

(260°C max.)

Heating

(230°C)

Gradual

Cooling

Pre-heating

(150-180°C)100

230

260

Te

mp

era

ture

(°C

)

60-120 sec. 40 sec.max.

30 sec.min.

120 sec.min.

Continued on the following page.

SFSCE10M7WF04/05-R0 Notice

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

25

3

Page 28: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Handling eAccurate test circuit values are required to measure

electrical characteristics. Miscorrelation may be caused if

there is any deviation, especially stray capacitance, from

the test circuit in the specification.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

e Storage and Operating Conditions e1. Product Storage Condition

Please store the products in a room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to + 40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because

solderability may be degraded due to storage under poor

conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because the characteristics may be

reduced in quality and may be degraded in

solderability due to storage in a chemical atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in places such as a

damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality and/or be degraded in

solderability due to storage under poor condition.

(5) Please do not drop the products to avoid cracking of

the ceramic element.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

26

3

Page 29: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

Dimensions of Carrier Tape

±±

±±±

±

(3°)

±

±

±

±

±

±

±

(in mm)

Embossed Tape ø180mm1,500

(pcs.)

(in mm)

Dimensions of Reel

ø13.0±0.5

2.0±0.5

240 to 280400 to 560

160 to 190

EmptyComponents

Cover film

Empty

Trailer Leader

17.0±1.0+1.0-013.0

+0 -1.5

180

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

27

3

Page 30: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Filters (CERAFILr)Chip Type SFSKA Series

RoHS

The SFSKA_CF ceramic filter is a small and thin SMD filter sealed with a metal cap.The SFSKA_CF is recommended for LCD-TVs, and small and thin tuners.

Features

1. High attenuation outside bandwidth2. Small and thin package3. Reflow-solderable

(1) : Input(2) : Ground(3) : Output

7.9±0.2 3.0±0.1

8.5±0.2 3.8±0.2

1.8±0.2

0.5±0.1

0.6±0.2 1.0±0.1

1.3±0.2

2.5±0.2 2.5±0.2

0.3±0.1

1.3±0.2(1) (2) (3) (in mm)

Part NumberNominal CenterFrequency (fn)

(MHz)

3dBBandwidth

(kHz)

20dBBandwidth

(kHz)

InsertionLoss(dB)

SpuriousAttenuation(1)

(dB)

SpuriousAttenuation(2)

(dB)

Input/OutputImpedance

(ohm)

SFSKA4M50CF00-R3 4.500 fn±60 min. 600 max. 6.0 max. 20 min.[within 0 to fn]

15 min.[within fn to 7.0MHz] 1000

SFSKA5M50CF00-R3 5.500 fn±60 min. 600 max. 6.0 max. 25 min.[within 0 to fn]

15 min.[within fn to 7.0MHz] 600

SFSKA6M00CF00-R3 6.000 fn±60 min. 600 max. 6.0 max. 25 min.[within 0 to fn]

15 min.[within fn to 7.5MHz] 470

SFSKA6M50CF00-R3 6.500 fn±60 min. 600 max. 6.0 max. 25 min.[within 0 to fn]

15 min.[within fn to 8.5MHz] 470

Area of Insertion Loss: at minimum loss pointFor safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

1.0 1.01.5 1.5

4.8

1.0

(in mm)

Standard Land Pattern Dimensions

E2C2R2RFVoltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=1000Ω ±5%, Rg=50ΩC2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)E1: S.S.G. Output voltage

(1): (2): (3):

InputGroundOutput

Test Circuit

SFSKA4M50CF00-R3

Continued on the following page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

28

4

Page 31: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Continued from the preceding page.

E2C2R2RFVoltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=600Ω ±5%, Rg=50ΩC2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)E1: S.S.G. Output voltage

(1): (2): (3):

InputGroundOutput

Test Circuit

SFSKA5M50CF00-R3

E2C2R2RFVoltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=470Ω ±5%, Rg=50ΩC2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)E1: S.S.G. Output voltage

(1): (2): (3):

InputGroundOutput

SFSKA6M00CF00-R3

E2C2R2RFVoltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=470Ω ±5%, Rg=50ΩC2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)E1: S.S.G. Output voltage

(1): (2): (3):

InputGroundOutput

SFSKA6M50CF00-R3

3.5 3.93.7 4.1 4.5 4.9 5.34.3

Att

enua

tion

(dB)

4.7Frequency (MHz)

5.1 5.5

0

10

20

30

40

50

60

70

Frequency Characteristics

SFSKA4M50CF00-R3

4.5 4.7 4.9 5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA5M50CF00-R3

5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M00CF00-R3

5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M50CF00-R3

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

29

4

Page 32: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

0.0 2.0 4.0

Att

enua

tion

(dB)

6.0Frequency (MHz)

8.0 10.0

0

10

20

30

40

50

60

70

Frequency Characteristics (Spurious)

SFSKA4M50CF00-R3

0 2.0 4.0 6.0 8.0 10.0

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA5M50CF00-R3

0 2.0 4.0 6.0 8.0 10.0

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M00CF00-R3

0 2.0 4.0 6.0 8.0 10.0

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M50CF00-R3

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

30

4

Page 33: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for use with placement

machines that employ optical placement capabilities.

Damage may result from excessive mechanical force.

Please make sure that you have evaluated by using

placement machines before going into mass production.

Do not use placement machines that utilize mechanical

positioning. Please contact Murata for details beforehand.

(3) Conditions for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause

destruction resistance characteristics to degrade. To

prevent this, be extremely careful in determining

shape and dimension before designing the circuit

board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting chips with a soldering iron, the tip of

the soldering iron should not directly touch the chip

component.

(4) Other

e Soldering and Mounting e

Te

mp

era

ture

(°C

)

100

230

260

30 sec.min.

40 sec.max.

Peak(260°C max.)

Pre-heating(150-180°C)

Heating(230°C)

GradualCooling

120 sec.min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Put the

component

lateral to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

Continued on the following page.

Ceramic Filters (CERAFILr) Chip Type SFSKA Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

31

4

Page 34: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Storage and Operating Conditions e

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling eAccurate test circuit values are required to measure

electrical characteristics.

Miscorrelation may be caused if there is any deviation,

especially stray capacitance, from the test circuit in the

specification.

1. Product Storage Conditions

Please store the products in room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (Shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because quality and solderability may be

degraded due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such as

a damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after package is

opened, because quality and solderability may be

degraded due to storage under the poor conditions.

(5) To avoid cracking of the ceramic element, please do

not drop the products.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. CoatingContinued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

32

4

Page 35: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

Embossed Tape ø330mm3,000

(pcs.)

(in mm)

21.5±1.0

33

2

80

±1

17.5±0.5

Empty

240 to 280 min.

400 to 560

160 to 190

ComponentsEmpty

Trailer Leader

Cover film

2.2±0.5

ø13.0±0.2

Dimensions of Reel

User direction of feed

Chip filter

Cover film

Peeling strength

(0.1 to 0.7N)

+0.1–0.0

+0

.1–

0.0

5

ø1.5 2.0±0.1 4.0±0.1

1.7

0.1

7.5

±0

.1

16

.0±

0.2

2.3

±0

.1

2.1

0.3

±0

.05

9.0

±0

.1

4.3±0.1

(3°)10° max.

8.0±0.1

Dimensions of Carrier Tape

+0.1–0.0ø1.5

( ) : Reference

(in mm)

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

33

4

Page 36: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Filters (CERAFILr)Chip Type SFSKB Series

RoHS

The SFSKB series are SMD ceramic filters suitable for IR headphone applications. Center frequencies of 2.3, 2.8, 3.2, 3.8, 4.3, 4.8, 5.2, 5.7MHz are available.Realized small, thin and lightweight package, compared with conventional LC filters.It helps to compose multi-channel circuit on one PCB.No frequency adjustment is required on PCB and itcontributes to the reduction of production cost.

Features

1. SMD package in plastic emboss tape, available for automatic placing.

2. They are slim, at only 1.5mm max. thickness, and have a small mounting area (5.2x3.8mm) enabling flexible PCB design.

3. Available for lead (Pb) free reflow soldering process.4. Operating temperature range: 0 to +70°C Storage temperature range: -55 to +85°C5. No frequency adjustment is required in production

process.6. Small, thin and lightweight package compared with

conventional LC filters

Applications

1. IR headphone2. Set Top Box for satellite broadcasting

(in mm)

*

5.2±0.1

(0.1) 1.5±0.1

0.3±0.1

(2.0) 4-0.35

(4.93)

0.2

0.1

4-0

.35

(3.5

)

3.8

±0

.1(1

.6)

1.0

±0.1

(0.1

)1

.35

±0

.15

Terminal Connection

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external

capacitor

* : EIAJ Monthly Code

Tolerance unless otherwise

specified : ±0.1mm

( ) : Reference

(1)

(1)

(2)

(4)

(3)

(2)

(4)

(3)

Part NumberNominal CenterFrequency (fn)

(MHz)

3dBBandwidth

(kHz)

20dBBandwidth

(kHz)

InsertionLoss(dB)

SpuriousAttenuation(1)

(dB)

SpuriousAttenuation(2)

(dB)

Input/OutputImpedance

(ohm)

SFSKB2M30GF00-R1 2.300 fn±75 min. 650 max. 6.0 max. 25 min.[within 1.3 to 1.8MHz]

23 min.[within 2.8 to 3.3MHz] 1000

SFSKB2M80GF00-R1 2.800 fn±75 min. 650 max. 6.0 max. 25 min.[within 1.8 to 2.3MHz]

25 min.[within 3.3 to 3.8MHz] 1000

SFSKB3M20FF00-R1 3.200 fn±75 min. 650 max. 6.0 max. 30 min.[within 2.2 to 2.8MHz]

30 min.[within 3.8 to 4.2MHz] 1000

SFSKB3M80GF00-R1 3.800 fn±75 min. 650 max. 6.0 max. 30 min.[within 2.8 to 3.2MHz]

30 min.[within 4.3 to 4.8MHz] 1000

SFSKB4M30GF00-R1 4.300 fn±75 min. 650 max. 6.0 max. 30 min.[within 3.3 to 3.8MHz]

30 min.[within 4.8 to 5.3MHz] 1000

SFSKB4M80GF00-R1 4.800 fn±75 min. 650 max. 6.0 max. 30 min.[within 3.8 to 4.3MHz]

30 min.[within 5.2 to 5.8MHz] 1000

SFSKB5M20GF00-R1 5.200 fn±75 min. 650 max. 6.0 max. 30 min.[within 4.2 to 4.8MHz]

30 min.[within 5.7 to 6.2MHz] 1000

SFSKB5M70GF00-R1 5.700 fn±75 min. 650 max. 6.0 max. 30 min.[within 4.7 to 5.2MHz]

30 min.[within 6.2 to 6.7MHz] 1000

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

34

5

Page 37: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

(in mm)

1.8 2.0 1.8

1.3

1.6

1.3

Standard Land Pattern Dimensions

R1

Rg

S.S.G.

R2

Cc

C2 RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=22pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1: S.S.G. Output Voltage

Input

Output

Ground

Terminal for

external capacitor

(1):

(2):

(3):

(4):

Test Circuit

SFSKB2M30GF00-R1/SFSKB3M80GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2 RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=39pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1: S.S.G. Output Voltage

Input

Output

Ground

Terminal for

external capacitor

(1):

(2):

(3):

(4):

SFSKB2M80GF00-R1/SFSKB3M20FF00-R1

R1

Rg

S.S.G.

R2

Cc

C2 RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=33pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1: S.S.G. Output Voltage

Input

Output

Ground

Terminal for

external capacitor

(1):

(2):

(3):

(4):

SFSKB4M30GF00-R1/SFSKB5M70GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2 RF

Voltmeter

(1)

(3)

(4)

(2)E

2

E1

R1+Rg=R2=1.0kΩ

Cc=15pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1: S.S.G. Output Voltage

Input

Output

Ground

Terminal for

external capacitor

(1):

(2):

(3):

(4):

SFSKB4M80GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2 RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=27pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1: S.S.G. Output Voltage

Input

Output

Ground

Terminal for

external capacitor

(1):

(2):

(3):

(4):

SFSKB5M20GF00-R1

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

35

5

Page 38: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

1.300 2.3001.800 2.800 3.300

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

Frequency Characteristics

SFSKB2M30GF00-R1

1.800 2.8002.300 3.300 3.800

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB2M80GF00-R1

2.200 3.2002.700 3.700 4.200

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB3M20FF00-R1

2.800 3.8003.300 4.300 4.800

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB3M80GF00-R1

3.300 4.3003.800 4.800 5.300

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB4M30GF00-R1

3.800 4.8004.300 5.300 5.800

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB4M80GF00-R1

4.200 5.2004.700 5.700 6.200

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB5M20GF00-R1

4.700 5.7005.200 6.200 6.700

Att

enua

tion

(dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB5M70GF00-R1

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

36

5

Page 39: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

0.300 1.300 2.300

Att

enua

tion

(dB)

3.300Frequency (MHz)

4.300

0

10

20

30

40

50

60

70

Frequency Characteristics (Spurious)

SFSKB2M30GF00-R1

0.800 1.800 2.800

Att

enua

tion

(dB)

3.800Frequency (MHz)

4.800

0

10

20

30

40

50

60

70

SFSKB2M80GF00-R1

1.200 2.200 3.200

Att

enua

tion

(dB)

4.200Frequency (MHz)

5.200

0

10

20

30

40

50

60

70

SFSKB3M20FF00-R1

1.800 2.800 3.800

Att

enua

tion

(dB)

4.800Frequency (MHz)

5.800

0

10

20

30

40

50

60

70

SFSKB3M80GF00-R1

2.300 3.300 4.300

Att

enua

tion

(dB)

5.300Frequency (MHz)

6.300

0

10

20

30

40

50

60

70

SFSKB4M30GF00-R1

2.800 3.800 4.800

Att

enua

tion

(dB)

5.800Frequency (MHz)

6.800

0

10

20

30

40

50

60

70

SFSKB4M80GF00-R1

3.200 4.200 5.200

Att

enua

tion

(dB)

6.200Frequency (MHz)

7.200

0

10

20

30

40

50

60

70

SFSKB5M20GF00-R1

3.700 4.700 5.700

Att

enua

tion

(dB)

6.700Frequency (MHz)

7.700

0

10

20

30

40

50

60

70

SFSKB5M70GF00-R1

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

37

5

Page 40: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for use with placement

machines that employ optical placement capabilities.

Damage may result from excessive mechanical force.

Please make sure that you have evaluated by using

placement machines before going into mass production.

Do not use placement machines that utilize mechanical

positioning. Please contact Murata for details beforehand.

(3) Conditions for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to

degrade. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. Solder containing Ag should be used to

prevent the electrode erosion.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in reflow soldering.

(4) Other

e Soldering and Mounting e

Te

mp

era

ture

(°C

)

100

200

260

30 sec.min.

60 sec.max.

Peak(260°C max.)

Pre-heating(150-170°C)

Heating(200°C)

GradualCooling

120 sec.min.

60-120 sec.

[Component Direction]

Put the

component

laterally to the

direction in

which stress

acts.

[Component Layout Close to Board]

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Continued on the following page.

Ceramic Filters (CERAFILr) Chip Type SFSKB Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

38

5

Page 41: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Storage and Operating Conditions e

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling eAccurate test circuit values are required to measure

electrical characteristics.

Miscorrelation may be caused if there is any deviation,

especially stray capacitance, from the test circuit in the

specification.

1. Product Storage Conditions

Please store the products in room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (Shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because quality and solderability may be

degraded due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such as

a damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after package is

opened, because quality and solderability may be

degraded due to storage under the poor conditions.

(5) To avoid cracking of the ceramic element, please do

not drop the products.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

39

5

Page 42: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

Embossed Tape ø330mm3,000

(pcs.)

( ): Reference

(in mm)

17.5±1.5

(ø3

30

)

(ø8

0)

13.5±1.0

Empty

240 to 280

400 to 560

160 to 190

ComponentsEmpty

Trailer Leader

Cover Film

2.2±0.2ø13.0±0.2

Label

Dimensions of Reel

Dimensions of Carrier Tape

* * * *

(in mm)

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

40

5

Page 43: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Trap (CERAFILr)Chip Type TPSKA Series

RoHS

The TPSKA_B ceramic trap is a small and thin SMD trap sealed with a metal cap recommended for LCD-TVs and small and thin tuners.

Features

1. High attenuation and high performance group delay time2. Small and thin package3. Reflow-solderable

(1) : Input(2) : Ground(3) : Output

7.9±0.2 3.0±0.1

8.5±0.2 3.8±0.2

1.8±0.2

0.5±0.1

0.6±0.2 1.0±0.1

1.3±0.2

2.5±0.2 2.5±0.2

0.3±0.1

1.3±0.2(1) (2) (3)

(in mm)

Part Number Nominal Center Frequency (fn1)(MHz)

Attenuation (fn1)(dB)

30dB Attenuation BW (fn1)(kHz)

TPSKA4M50B00-R3 4.500 35 min. 50 min.TPSKA5M50B00-R3 5.500 35 min. 70 min.TPSKA6M00B00-R3 6.000 35 min. 70 min.TPSKA6M50B00-R3 6.500 35 min. 70 min.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

1.0 1.01.5 1.5

4.8

1.0

(in mm)

Standard Land Pattern Dimensions

RFVoltmeter

Rg

R1

L

S.S.G.

Rg=50ΩR1=330ΩR2=1.0kΩ

L=15μH

50Ω R2

Test Circuit

Att

enua

tion

(dB)

Frequency (MHz)4.0 4.24.1 4.3 4.5 4.7 4.94.4 4.6 4.8 5.0

0

10

20

30

40

50

60

70

Frequency Characteristics

TPSKA4M50B00-R3

Att

enua

tion

(dB)

Frequency (MHz)5.0 5.25.1 5.3 5.5 5.7 5.95.4 5.6 5.8 6.0

0

10

20

30

40

50

60

70

TPSKA5M50B00-R3

Continued on the following page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

41

6

Page 44: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Continued from the preceding page.

Att

enua

tion

(dB)

Frequency (MHz)5.5 5.75.6 5.8 6.0 6.2 6.45.9 6.1 6.3 6.5

0

10

20

30

40

50

60

70

Frequency Characteristics

TPSKA6M00B00-R3

Att

enua

tion

(dB)

Frequency (MHz)6.0 6.26.1 6.3 6.5 6.7 6.96.4 6.6 6.8 7.0

0

10

20

30

40

50

60

70

TPSKA6M50B00-R3

Att

enua

tion

(dB)

Frequency (MHz)0 1.0 2.0 3.0 4.0 5.0

Gro

up D

elay

Tim

e (μ

sec

.)

0

10

20

30

40

50

60

70

80

700

600

500

400

300

200

100

0

Frequency Characteristics (Spurious)

TPSKA4M50B00-R3

Att

enua

tion

(dB)

Frequency (MHz)0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

Gro

up D

elay

Tim

e (μ

sec

.)

0

10

20

30

40

50

60

70

80

1000

800

600

400

200

0

TPSKA5M50B00-R3

Att

enua

tion

(dB)

Frequency (MHz)0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

Gro

up D

elay

Tim

e (μ

sec

.)

0

10

20

30

40

50

60

70

80

1000

800

600

400

200

0

TPSKA6M00B00-R3

Att

enua

tion

(dB)

Frequency (MHz)0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

Gro

up D

elay

Tim

e (μ

sec

.)

0

10

20

30

40

50

60

70

80

1000

800

600

400

200

0

TPSKA6M50B00-R3

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

42

6

Page 45: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for use with placement

machines that employ optical placement capabilities.

Damage may result from excessive mechanical force.

Please make sure that you have evaluated by using

placement machines before going into mass production.

Do not use placement machines that utilize mechanical

positioning. Please contact Murata for details beforehand.

(3) Conditions for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause

destruction resistance characteristics to degrade. To

prevent this, be extremely careful in determining

shape and dimension before designing the circuit

board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting chips with a soldering iron, the tip of

the soldering iron should not directly touch the chip

component.

(4) Other

e Soldering and Mounting e

Te

mp

era

ture

(°C

)

100

230

260

30 sec.min.

40 sec.max.

Peak(260°C max.)

Pre-heating(150-180°C)

Heating(230°C)

GradualCooling

120 sec.min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Put the

component

lateral to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

Continued on the following page.

Ceramic Trap (CERAFILr) Chip Type TPSKA Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

43

6

Page 46: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Storage and Operating Conditions e

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling eAccurate test circuit values are required to measure

electrical characteristics.

Miscorrelation may be caused if there is any deviation,

especially stray capacitance, from the test circuit in the

specification.

1. Product Storage Conditions

Please store the products in room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (Shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because quality and solderability may be

degraded due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such as

a damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after package is

opened, because quality and solderability may be

degraded due to storage under the poor conditions.

(5) To avoid cracking of the ceramic element, please do

not drop the products.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. CoatingContinued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

44

6

Page 47: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

Embossed Tape ø330mm3,000

(pcs.)

(in mm)

21.5±1.0

33

2

80

±1

17.5±0.5

Empty

240 to 280 min.

400 to 560

160 to 190

ComponentsEmpty

Trailer Leader

Cover film

2.2±0.5

ø13.0±0.2

Dimensions of Reel

User direction of feed

Chip filter

Cover film

Peeling strength

(0.1 to 0.7N)

+0.1–0.0

+0

.1–

0.0

5

ø1.5 2.0±0.1 4.0±0.1

1.7

0.1

7.5

±0

.1

16

.0±

0.2

2.3

±0

.1

2.1

0.3

±0

.05

9.0

±0

.1

4.3±0.1

(3°)10° max.

8.0±0.1

Dimensions of Carrier Tape

+0.1–0.0ø1.5

( ) : Reference

(in mm)

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

45

6

Page 48: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Ceramic Discriminator (CERAFILr)Chip Type CDSCB Series

RoHS

The CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth.They have 1.0mm max. thickness and small mounting area(4.5x2.0mm).

Features

1. Compact and high reliability and recommended for automotive applications.

2. Can be combined with various ICs. The IC is determined by the last number in the part number.

3. Stable demodulation characteristics can be obtained without adjustment.

4. Stable temperature characteristics.5. Available lead (Pb) free solder reflow.

4.1 max.

1.0

max

.

4.5±0.1

0.2±0.2

2.0

±0

.1

0.3

±0

.2

0.4(ref.) 0.4(ref.)

1.4

ma

x.

0.4±0.05

1.5±0.1

0.8±0.10.8±0.1

1.5±0.1 (in mm)

Part NumberCenter

Frequency (fo)(MHz)

RecoveredAudio 3dB BW

(kHz)

RecoveredAudio Output

(mV)Distortion

(%)S Curve

(mV) IC

CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. - TEA5757HLCDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. - TA2154FNCDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. - TRF6901CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. - LV23100VCDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. - TA31161CDSCB10M7GF107S-R0 10.700 (fn) fn±80 min. 52 min. 3.0 max. - TA31272FNCDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. - TK14588VCDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FNCDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FNCDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV

(fn) indicates nominal center frequency (10.700MHz).For safety purposes, avoid applying a direct current between the terminals.The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.

Standard Center Frequency Rank CodeCODEA

30kHz Step10.700MHz±30kHz

25kHz Step10.700MHz±25kHz

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

46

7

Page 49: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

2.6

1.0 2.0 1.0

3.0

(in mm)

Standard Land Pattern Dimensions

48 41424344454647

1312

20191817161514

4.7μ

X

150

S.S.G.

Vcc (3.0V)

0.1

μ

0.4

TEA5757HL

(PHILIPS)

+

40

21

39

22

38

23

37

24

X: CDSCB10M7GA105A-R0

0.1μ

0.1μ10μ

100μ

10

100k

+

+

AF

C (

n)

AF

C (

p)

AF OUT

DC OUT

330p

0.22μ

11

10

9

8

7

6

5

4

3

2

1

25

26

27

28

29

30

31

32

33

34

35

36

0.1

μ

Unit C

R

: F

: Ω

Test Circuit

CDSCB10M7GA105A-R0

30 23242526272829

1 8765432

2.2μ

D.C. OUT

S.S.G.

Vcc (1.2V)

AF OUT

0.0

0.0

0.0

0.0

68

0p

TA2154FN (TOSHIBA)

+

22

9

21

10

20

11

19

12

18

13

17

14

16

15

X: CDSCB10M7GA113-R0

0.0

X

Unit C

R

: F

: Ω

CDSCB10M7GA113-R0

0.01μ

0.01μ

0.01μ0.01μ

0.01μ

0.47μ

2.2μ 0.1μ

0.1μ0.22μ

4.7μ

120p

220k

68p

15p

82p

47p

1000p

100p

100p10k

10k1k

+

10

IF Input AF Output

Vcc (3.0V)

TRF6901

(TEXAS INSTRUMENTS)

PIC16F84

X

+

X: CDSCB10M7GA119-R0

1

2

3

4

5

6

7

8

9

10

11

12

36

35

34

33

32

31

30

29

28

27

26

25

13 14 15 16 17 18 19 20 21 22 23 24

48 47 46 45 44 43 42 41 40 39 38 37

18 17 16 15 14 13 12 11 10

1 2 3 4 5 6 7 8 9

Unit C

R

L

: F

: Ω

: H

CDSCB10M7GA119-R0

0.47μ

0.01μAF Output D.C. Output

LV23100V (SANYO)

PIC16F84 (Control IC)

10k

10k

10k

Vcc (3.2V)

1μ0.047μ

0.0

47

μ

2.2μ 0.1μ

1k

0.0

47

μ1

0k

75

0.015μ

0.01μ

10

10

p

10

0p

10

p22μ

10μ

3.3k

+

1μ+

+

+

+

+

+

S.G.

X

Unit

C: F

R: ΩX: CDSCB10M7GA121-R0

36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19

1 2 3 4 5 6 7 98 10 11 12 13 14 15 16 17 18

18

1

17

2

16

3

15

4

14

5

13

6

12

7

10

9

11

8

CDSCB10M7GA121-R0

Continued on the following page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

47

7

Page 50: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Continued from the preceding page.

Unit C

R

: F

: Ω

X: CDSCB10M7GA135-R0

1 2 3 4 5 6 7 8

9

10

11

12

13

14

15

16

1718192021222324

25

26

27

28

29

30

31

32

220k

0.01μ

0.01μ

1000p

0.1μ

0.01μ1000p100p

330p

0.033μ

12p

0.01μ

0.01μ

0.01μ

1000p

C.D.

330p10μ+

S.G.

Vcc (5.0V)

TH71101, TH71102,

TH71111 or TH71112

(MELEXIS)

FKS-OUTAF-OUT

330k

Test Circuit

CDSCB10M7GA135-R0

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 9

18 17 16 15 14 13 12 11 10

9

10

11

12

13

14

15

16

1718192021222324

25

26

27

28

29

30

31

32

Unit CR

: F: Ω

X: CDSCB10M7GA136-R0

0.1μ

2.2μ

1k

100k

3.3k

+0.1μ

100p

10k

PIC16F84 (Control IC)

TH7122[Internal AFC Enabled]

(MELEXIS)

Vcc (5.0V)

0.01μ

0.01μ

0.1μ0.01μ330p

330p 100k

330p

S.G. C.D.

FKS-OUT

AF-OUT

330p

330p

0.01μ

CDSCB10M7GA136-R0

16

Vcc (3V)

9101112131415

1 8765432

IF IN

AF OUT

0.01μ

33μ 0.01μ

R

10p

4.7μ

X0.01μ

0.01μ

0.0

+

TA31161 (TOSHIBA)

X: CDSCB10M7GF072-R0

R: 820

Unit C

R

L

: F

: Ω

: H

CDSCB10M7GF072-R0

0.01μ

0.01μ

Vcc (3.0V)

12k

51k

1000p8p

+S.S.G.

R

D.C. Output AF Output

X

0.0

0.0

0.0

0.0

4.7

μ51

0.0

1.2

μ

TK14588V (TOKO)

X: CDSCB10M7GF109-R0

R: 820

910111213141516

87654321

Unit C

R

L

: F

: Ω

: H

CDSCB10M7GF109-R0

Vcc (5.0V)

1 2 3 4 5 6 7 8 9 10 11 12

24 23 22 21 20 19 18 17 16 15 14 13

0.1

μ

0.0

TA31275FN (TOSHIBA)

10

00

p

33

00

p

0.0

1μ AF OUT

DC-OUT

0.0

0.0

0.1

μ

0.1

μ

0.1

μ1

.8k

0.0

X: CDSCB10M7GF123-R0

Unit C

R

: F

: Ω

S.S.G.

CDSCB10M7GF123-R0

Vcc (5.0V)

1 2 3 4 5 6 7 8 9 10

20 19 18 17 16 15 14 13 12 11

NJM2295AV (JRC)

0.0

DC-OUT

10

0p

0.0

10

μ

0.0

10

μ

180

8p

C.D.

0.0

X: CDSCB10M7GF126-R0

Unit C

R

: F

: Ω

S.G.

+

+

10

μ

+

10

μ

+

CDSCB10M7GF126-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

48

7

Page 51: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

AF

Ou

tpu

t V

olt

ag

e (

mV

)

To

tal

Ha

rmo

nic

Dis

tort

ion

(%

)

Frequency (MHz)

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

Input=100dBμ

fdev.=±75kHz

fmod.=1kHz

Vcc=3.0V

Recovered Audio Curve

CDSCB10M7GA105A-R0

AF

Ou

tpu

t V

olt

ag

e (

mV

)

To

tal

Ha

rmo

nic

Dis

tort

ion

(%

)

Frequency (MHz)

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

Input=100dBμ

fdev.=±75kHz

fmod.=1kHz

Vcc=1.2V

CDSCB10M7GA113-R0

AF

Ou

tpu

t V

olt

ag

e (

mV

)

To

tal

Ha

rmo

nic

Dis

tort

ion

(%

)

Frequency (MHz)

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

Input=100dBμ

fdev.=±60kHz

fmod.=1kHz

Vcc=3.0V

CDSCB10M7GA119-R0

AF

Ou

tpu

t V

olt

ag

e (

mV

)

To

tal

Ha

rmo

nic

Dis

tort

ion

(%

)

Frequency (MHz)

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

Input=100dBμ

fdev.=±75kHz

fmod.=1kHz

Vcc=3.2V

CDSCB10M7GA121-R0

AF

Ou

tpu

t V

olt

ag

e (

mV

)

Frequency (MHz) 10.4 10.5 10.6 10.7 10.8 10.9 11.0

0.1

1

10

100

1000

Input=100dBμ

fdev.=±50kHz

fmod.=1kHz

Vcc=5.0V

CDSCB10M7GA135-R0

AF

Ou

tpu

t V

olt

ag

e (

mV

)

Frequency (MHz)

1

10

100

10.4 10.5 10.6 10.7 10.8 10.9 11.00.1

Input=100dBμ

fdev.=±50kHz

fmod.=1kHz

Vcc=5.0V

1000

CDSCB10M7GA136-R0

Continued on the following page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

49

7

Page 52: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Continued from the preceding page.

AF

Ou

tpu

t V

olt

ag

e (

mV

)

To

tal

Ha

rmo

nic

Dis

tort

ion

(%

)

Frequency (MHz)

100 10

1000 100

10 1

1 0.1

10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0

Input=100dBμ

fdev.=±80kHz

fmod.=1kHz

Vcc=3.0V

Recovered Audio Curve

CDSCB10M7GF072-R0

AF

Ou

tpu

t V

olt

ag

e (

mV

)

To

tal

Ha

rmo

nic

Dis

tort

ion

(%

)

Frequency (MHz)

1000 100

100 10

10 1

1 0.1

10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0

Input=100dBμ

fdev.=±64kHz

fmod.=1kHz

Vcc=3.0V

CDSCB10M7GF109-R0

Vo

lt (

V)

Frequency (MHz)

0.5

0.0

1.0

1.5

2.0

2.5

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

S Curve

CDSCB10M7GF123-R0

Vo

lt (

V)

Frequency (MHz)

1.0

2.0

3.0

4.0

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

CDSCB10M7GF126-R0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

50

7

Page 53: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions(1) Reflow

Filter is soldered at +300±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended for use with placement

machines that employ optical placement capabilities.

The component might be damaged by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines that

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Conditions for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to

degrade. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick-up nozzle are

worn, the load is applied to the components while

positioning is concentrated on positioning accuracy,

etc. Careful checking and maintenance are necessary

to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. Solder containing Ag should be used to

prevent electrode erosion.

(4) Other

e Soldering and Mounting e

Te

mp

era

ture

(°C

)

100

230

260

30 sec.min.

40 sec.max.

Peak(260°C max.)

Pre-heating(150-180°C)

Heating(230°C)

GradualCooling

120 sec.min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Place the

component

laterally to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of: A>C>B

B

A CSlit

Perforation

Continued on the following page.

Ceramic Discriminator (CERAFILr) Chip Type CDSCB Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

51

7

Page 54: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Storage and Operating Conditions e

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling eAccurate test circuit values are required to measure

electrical characteristics. Miscorrelation may be caused if

there is any deviation, especially stray capacitance, from

the test circuit in the specification.

1. Product Storage Conditions

Please store the products in a room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because

solderability may be degraded due to storage under poor

conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because quality and solderability may be

degraded due to storage in a chemical atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in places such as a

damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after package is

opened, because quality and solderability may be

degraded due to storage under poor conditions.

(5) To avoid cracking of the ceramic element, please do

not drop the products.

4. Other

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

52

7

Page 55: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

Embossed Tape ø180mm2,000

(pcs.)

Dimensions of Reel

(in mm)

ø13.0±0.2

2.0±0.5

17.0±1.0

18

0+

0.1

-1.5

60

+0

.1-0

240 to 280

400 to 560

160 to 190

EmptyComponents

Cover film

Empty

Trailer Leader

13.0+1.0-0

4.0±0.1

Cover film

4.0±0.1

2.0±0.05

12

.0±

0.2

(9.0

)

ø1.5+0.1

-0

ø1.5+0.1

-0

5.5

±0.0

51

.75

±0

.1

4.7

±0

.1

User direction of feed

0.3

±0

.05

1.1

±0

.1

(3°)

2.2±0.1

0.1 to 0.7N10°

( ): Reference

(in mm)

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

53

7

Page 56: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Crystal FiltersChip Type XDCAF/XDCAG/XDCAH Series

LeadfreeRoHS

(in mm)

7.0±0.2

1.2

(GND)

(In)

(Out)

(GND)

(GND)

(GND)

5.0

±0

.22

.54

1.1

±0

.15

1.0

Series SizeCenter Frequency

(MHz)

Number

of Poles

XDCAF7050

20 to 80[Fundamental]

70 to 150[3rd over tone]

2XDCAG 4XDCAH 4

Please be sure to consult with our sales representative or engineer if you require other center frequencies.

Murata's Crystal Filter with original thin wafer design technology based on long experience and activity realizes high reliability and is widely used in various applications such as business radios.

Features

1. Low profile surface mount2. Customized design and matching service3. 4-Pole type is a small size in one package

Applications

1. Radio communication2. Base Station3. Communication (IF) other

(in mm)

7.0±0.2

1.2

(GND)

(In)

(Out)

(GND)

(GND)

(GND)

5.0

±0

.22

.54

1.1

±0

.15

1.0

(in mm)

7.0±0.2

1.2

(GND)

(In)

(Out)

(GND)

(GND)

(GND)

5.0

±0

.22

.54

1.1

±0

.15

1.0

Series Part NumberCenter

Frequency(MHz)

3dBBandwidth(kHz min.)

StopbandWidth

(dB max.)

InsertionLoss

(dB max.)

Ripple(dB max.)

Spurious Response(dB min.)

[fo±1MHz]

Guarantee Attenuation(dB min.)

[fo−900kHz]

TerminationImpedance

(Ω//pF)

Number of

poles

OperatingTemperature

Range (˚C)

XDCAF XDCAF21M400RAA00P0 21.4000 ±7.5 18[fo±25kHz] 2.0 1.0 10 70 1500//2.5 2 −20 to +70

XDCAF XDCAF21M700MAA00P0 21.7000 ±3.75 18[fo±20kHz] 2.0 1.0 18 70 850//8.0 2 −20 to +70

XDCAG XDCAG38M850PGA00P0 38.8500 ±5.0 45[fo±25kHz] 5.0 1.0 40 70 610//3.0

[Cc=14.0pF] 4 −20 to +70

XDCAG XDCAG58M050MGA00P0 58.0500 ±4.0 38[fo±20kHz] 5.0 1.0 40 70 250//5.5

[Cc=20.5pF] 4 −20 to +70

XDCAH XDCAH50M850PHA00P0 50.8500 ±5.0 45[fo±25kHz] 5.0 1.0 60 80 560//4.0

[Cc=11.0pF] 4 −20 to +70

XDCAH XDCAH73M350QHA03P0 73.3500 ±6.0 40[fo±25kHz] 4.0 1.0 60 80 450//4.0

[Cc=9.2pF] 4 −20 to +70

Part Number List

Series

XDCAF

XDCAH

XDCAG

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

54

8

Page 57: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

G

C1

OUTG

IN GG

C1

C2 L1C2

Terminating Impedance: 1500Ω//2.5pF

L1

Test circuit

XDCAF21M400RAA00P0/XDCAF21M700MAA00P0

3pF 14pF 3pF

560Ω 560Ω

L.M 50ΩS.G 50Ω

G OUTC

IN GC

XDCAG38M850PGA00P0/XDCAG58M050MGA00P0

4pF 11pF 4pF

510Ω 510Ω

L.M 50ΩS.G 50Ω

G OUTC

IN GC

XDCAH50M850PHA00P0/XDCAH73M350QHA03P0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

55

8

Page 58: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

c1: LOG 1 dB/c2: LOG 10 dB/

c1: CNF 21.4 MHzc2: CNF 21.4 MHz

SPF 40 kHzSPF 2 MHz

REF -29.825 dBREF -29.825 dB

Frequency Characteristics

c1: LOG 1 dB/c2: LOG 10 dB/

c1: CNF 21.7 MHzc2: CNF 21.7 MHz

SPF 20 kHzSPF 2 MHz

REF -5.336 dBREF -5.336 dB

c1: LOG 1 dB/c2: LOG 10 dB/

c1: CNF 38.85 MHzc2: CNF 38.85 MHz

SPF 20 kHzSPF 2 MHz

REF -1.559 dBREF -1.559 dB

c1: LOG 1 dB/c2: LOG 10 dB/

c1: CNF 58.05 MHzc2: CNF 58.05 MHz

SPF 20 kHzSPF 2 MHz

REF -3.634 dBREF -3.634 dB

XDCAG58M050MGA00P0

c1: LOG 1 dB/c2: LOG 10 dB/

c1: CNF 50.85 MHzc2: CNF 50.85 MHz

SPF 20 kHzSPF 2 MHz

REF -2.641 dBREF -2.641 dB

XDCAH50M850PHA00P0

c1: LOG 1 dB/c2: LOG 10 dB/

c1: CNF 73.35 MHzc2: CNF 73.35 MHz

SPF 30 kHzSPF 2 MHz

REF -4.566 dBREF -4.566 dB

XDCAH73M350QHA03P0

XDCAF21M400RAA00P0 XDCAF21M700MAA00P0

XDCAG38M850PGA00P0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

56

8

Page 59: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

c3: DLY 5 μsec/

c3: CNF 21.4 MHz SPF 40 kHz

REF 23.6 μsec

Spurious

c3: DLY 10 μsec/

c3: CNF 21.7 MHz SPF 20 kHz

REF 50.7 μsec

c3: DLY 20 μsec/

c3: CNF 38.85 MHz SPF 20 kHz

REF 66.2 μsec c3: DLY 20 μsec/

c3: CNF 58.05 MHz SPF 20 kHz

REF 82.202379 μsec

XDCAG58M050MGA00P0

c3: DLY 20 μsec/

c3: CNF 50.85 MHz SPF 20 kHz

REF 65.4 μsec

XDCAH50M850PHA00P0

c3: DLY 15 μsec/

c3: CNF 73.35 MHz SPF 30 kHz

REF 51.529 μsec

XDCAH73M350QHA03P0

XDCAF21M400RAA00P0 XDCAF21M700MAA00P0

XDCAG38M850PGA00P0

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

57

8

Page 60: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

Filter is soldered twice within the following temperature

conditions.

Flux: Please use rosin based flux, but do not use water

soluble flux.

1. Standard Reflow Soldering Conditions(1) Reflow

e Soldering and Mounting e

Do not clean or wash the component.

2. Wash

Peak

(260°C max.)

Pre-heating

(150-180°C)120

220

260

Te

mp

era

ture

(°C

)

120 sec. max. 60 sec. max.

10 sec. max.

360 sec. max.

Heating

(220°C)

If compelled to mount the component by using a

soldering iron, please do not directly touch the

component with the soldering iron. The component

terminals or electrical characteristics may be damaged if

excessive thermal stress is applied.

(2) Soldering Iron

Condition

Heating of the Soldering Iron 350°C max.

Soldering Time 5 sec. max.

e Storage and Operating Conditions e1. Product Storage Condition

Please store the products in a room where the

temperature/humidity is stable, and avoid places where

there are large temperature changes. Please store the

products under the following conditions:

Temperature: -10 to + 40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expiration date (shelf life) of the products is six months

after delivery under the conditions of a sealed and

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

solderability may be degraded due to storage under poor

conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides

and so on), because the characteristics may be

reduced in quality and may be degraded in

solderability due to storage in a chemical atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in places such as a

damp heated place or any place exposed to direct

sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality and/or be degraded in

solderability due to storage under poor conditions.

(5) Please do not drop the products to avoid cracking of

the ceramic element.

4. Other

(1) Please be sure to consult with our sales

representative or engineer whenever the products are

to be used in conditions not listed above.

Continued on the following page.

Crystal Filters Chip Type XDCAF/XDCAG/XDCAH Series

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

58

8

Page 61: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Notice

e Rating eThe component may be damaged if excessive mechanical

stress is applied.

e Handling e(1) For safety purposes, connect the output of filters to the

IF amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of filters.

(2) The component is recommended for placement

machines employing optical placement capabilities. The

component might be damaged by mechanical force

depending on placement machine and condition. Make

sure that you have evaluated by using placement

machines before going into mass production. Do not use

placement machines employing mechanical positioning.

Please contact Murata for details beforehand.

(3) Do not reuse components once mounted onto a circuit

board.

(4) Crystal Filter

You are requested to approve our data sheet and

confirm the environment surrounding a crystal filter as

well.

In order to demonstrate sufficient performance, please

read the following notes.

(4)-1 Necessity for LC Tuned Circuit

When the stray capacitance of the PCB that mounts a

crystal filter is large, a tuned circuit for offsetting the

stray capacitance may be needed.

(4)-2 Termination Impedance

The original characteristic in a pass band, insertion loss,

ripple and bandwidth characteristic are no longer

acquired when termination impedance differs from a

rated value. The circuit impedance shall be measured

accurately and it has consistency to match on

termination conditions.

Please keep in mind that a passage region will move in

particular, if termination impedance does not match.

(4)-3 Maximum Level

An input level shall be less than a rated value.

If the input level beyond a rated value impressed, a

crystal resonance characteristic will be deteriorated and

the original characteristic will no longer be acquired as a

crystal filter.

(4)-4 Separation between Input and Output

In order to prevent electromagnetic combination

between input and output, please have shielded

certainly. If it has the combination between input and

output, the incoming signal may go to the output side

directly in the attenuation domain. The amount of

guarantee attenuation will less achievable and the

original characteristic of crystal filter will no longer be

acquired.

There is grounding as one of the method. It enables to

have the crystal filter grounded with attachment screw

or grounding terminal.

The internal part of crystal filter may be damaged, if it

solders to a case directly. In addition the case of a

crystal filter is grounded certainly because potential

difference can be eliminated at the circuit side.

(4)-5 Direct-Current Superposition

When you charge direct-current, please do not have the

current beyond a rated current value. Internal

transformer will generate a heat and it will create a

cause of bad insulation or disconnection, if excess direct

current goes through filter than the rated value.

Continued from the preceding page.

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

59

8

Page 62: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Minimum Quantity/Dimensions of Reel

Dimensions of Carrier Tape

Packaging

(in mm)

Drawing Out Direction

ø1.5+0.1–0.0

1.8±0.1

ø1.5+0.1–0.0

R0.3 max.

2.0±0.1

4.0±0.18.0±0.1

5.5±0.1

1.7

0.1

7.5

±0

.1

INMa

rkin

g

7.5

±0

.1

16

.0±

0.3

0.3±0.05

5° max.

Embossed Tape ø330mm3,000

(pcs.)

(in mm)

60°

7-ø10

17.5±0.5

21.5±1.0

13

±0

.2

22

33

2

10

1

ø21

12-R5

30 4-R8

2

R135

R55

8-R10

ø13

35°

P51E.pdfDec.25,2015

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

60

8

Page 63: Ceramic Filters ('CERAFIL')/Crystal Filters · 2015. 12. 25. · Crystal Filter XD Crystal Filter C Monolithic SMD Product ID Code Type · Lead Style (Part Number) 6Bandwidth Expressed

Murata Manufacturing Co., Ltd.

www.murata.com

Note1 Export Control

For customers outside Japan:

No Murata products should be used or

sold, through any channels, for use in the

design, development, production, utilization,

maintenance or operation of, or otherwise

contribution to (1) any weapons (Weapons of

Mass Destruction [nuclear, chemical or biological

weapons or missiles] or conventional weapons)

or (2) goods or systems specially designed or

intended for military end-use or utilization by

military end-users.

For customers in Japan:

For products which are controlled items subject

to the “Foreign Exchange and Foreign Trade Law”

of Japan, the export license specifi ed by the law

is required for export.

2 Please contact our sales representatives or

product engineers before using the products in

this catalog for the applications listed below,

which require especially high reliability for the

prevention of defects which might directly

damage a third party’s life, body or property, or

when one of our products is intended for use

in applications other than those specified in

this catalog.

1 Aircraft equipment

2 Aerospace equipment

3 Undersea equipment

4 Power plant equipment

5 Medical equipment

6 Transportation equipment (vehicles, trains,

ships, etc.)

7 Traffi c signal equipment

8 Disaster prevention / crime prevention

equipment

9 Data-processing equipment

10 Application of similar complexity and/or

reliability requirements to the applications

listed above

3 Product specifi cations in this catalog are as of

December 2015. They are subject to change or

our products in it may be discontinued without

advance notice. Please check with our sales

representatives or product engineers before

ordering. If there are any questions, please contact

our sales representatives or product engineers.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and

handling) in this catalog to prevent smoking

and/or burning, etc.

5 This catalog has only typical specifi cations.

Therefore, please approve our product

specifi cations or transact the approval sheet

for product specifi cations before ordering.

6 Please note that unless otherwise specifi ed, we

shall assume no responsibility whatsoever for any

confl ict or dispute that may occur in connection

with the eff ect of our and/or a third party’s

intellectual property rights and other related

rights in consideration of your use of our products

and/or information described or contained in our

catalogs. In this connection, no representation

shall be made to the eff ect that any third parties

are authorized to use the rights mentioned above

under licenses without our consent.

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing

process.

Global LocationsFor details please visit www.murata.com

Cat. No. P51EP51E.pdf

Dec.25,2015