Catalogue ABS-Armaturen

A B S - Armaturen Waste water system elements

It's the seal that matters

A B S – Armaturen GmbH Waste water system elements

We have been an independent standalone company since the end of 2001. We use our

experience and innovative power to create waste water fittings to match our customers'

requirements.

We offer a complete range of waste water valves and fittings in various materials and

design variations, and also with statics, hydraulic throughflow quantity calculations and on-

site installation if required. We have standard fittings up to nominal size (NS) 1000 mm in

stainless steel (V2A + V4A) in stock. We fulfil the requirements of usage-oriented product

quality at competitive price levels using our complete range of performance, delivery and

service.

Working with our experienced designers and structural engineers, who are fitted out with

the very latest in software programs (CAD systems (AutoCAD2004) and calculation

programs (MathCAD11.0)), we design and produce to current state-of-the-art technology

in a variable modular system (destruction-free installation and dismantling of all wear parts

using standard tools) in compliance with the wastewater valves and fittings Standard DIN

19569 Part 4. Our production department (12 staff) processes the CAD data and carry out

production on the most modern CNC machines available, which also makes production of

spare parts documentation a simple task. The last stage of the production is glass bead

blasting of the stainless steel.

ABS seals are made shape and form-positive in NBR, which leads to low torques and

minimum wear.

ABS drives are all constructed with roller bearings and are specified to customer

requirements ( AUMA, EMG etc).

You will find ABS valves and fittings in sewage works, rainwater retention basins, road

drainage systems and anywhere where wastewater is flowing. . .

ABS - Armaturen GmbH

Udo Dieme Udo Dieme Udo Dieme Udo Dieme General Manager

Werster Heide 8 . 32549 Bad theOeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110

Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 1

01.2005 Subject to structural and technical changes, dimensions not guaranteed!


Contents Type descriptions Page

Our company 1 Contents 2 + 3 Product selection 4 + 5 Product images 6 + 7 Fittings knowledge + DIN 195569 Part 4 8 Designation code 9 Electrical mobile drive 10 Position indicator device unpowered, digital 6-character display 11 Below-floor drives 12 – 14 Above-floor drives 15 – 22 Drive - Protective covers 23 Plug sluice straight bed sill for grouting in SE3_ 24 Plug sluice with stepped bed, for dowelling on SA3_ 24 Plug sluice round bed for grouting in SR3_ 25 Plug sluice with stepped bed, for dowelling on; for curved structures SA3V 25 Handpull slide gate round bed for grouting in HR4_ 26 Handpull slide gate with stepped bed, for dowelling on H4A 26 Handpull slide gate straight bed sill for grouting in HE4A 27 Handpull slide gate with stepped bed, for dowelling on, for curved structures H4V 28 Threaded slide gate with stepped bed, for dowelling on G4_ 29 Threaded slide gate with round bed for grouting in GR4_ 30 Threaded slide gate with stepped bed, for dowelling on for curved structures G4V 31 Slider flap with stepped bed, for dowelling on SK4_ 32 Flanged threaded slide gate with stepped bed, for flanging on with flange G4P 33 Flanged threaded slide gate with stepped bed, for flanging on without flange G4M 33 Adjustment slide gate with stepped bed, for dowelling on RS4_ 34 Throttling slide gate with stepped bed, for dowelling on D4_ 35 Throttling slide gate with round bed for grouting in DR4_ 35 Channel sluice straight bed sill for grouting in; 3-sided seal RE3_ 36 Channel sluice with stepped bed, for dowelling on; 3-sided seal RA3_ 37 Channel slide gate straight bed sill for grouting in; 4-sided seal RE4_ 38 Channel slide gate with stepped bed, for dowelling on; 4-sided seal RA4_ 39 Descending sluice for dowelling on; 3-sided seal A3_ 40 Descending slide gate for dowelling on; 4-sided seal A4_ 41 Dam arbor closing straight bed sill for grouting in DE_ _ 42 Dam arbor closing round bed for grouting in DR_ _ 43 Dam arbor closing with stepped bed, for dowelling on DA_ _ 43 Dam board closing straight bed sill for grouting in TE_ _ 44 Dam board closing round bed for grouting in TR_ _ 44 Dam arbor - Selection table 45 Backwater flap DN with stepped bed, for dowelling on flat cover R_D 46 Backwater flap W x H with stepped bed, for dowelling on flat cover R_D 47 Backwater flap DN with stepped bed, for dowelling on hollow cover R_H 48 Backwater flap DN with stepped bed, for dowelling on with counterweight R_G 49 Backwater flap DN for insertion in KG sleeve RK_ 50 Pump flap with impact damper; for flanging on with flange R_S 51 Barscreen for dowelling on; for circular and rectangular openings SR_ 52 Overflow barrier gates for dowelling on; for curved and straight structures ÜS_ 53 Overflow wall for dowelling on; for curved and straight structures TW_ _ 54 Baffle plate for dowelling on; for curved and straight structures PTA 55 Baffle plate for grouting in PTE 56 Baffle plate for flanging on with flange PTP 57





Contents Type descriptions Page

Baffle screens (Mönch) for dowelling on, for curved and straight structures PW 58 Telescope slide gate (Mönch) for flanging on with flange TKS 59 Distribution tongue for dowelling on VZ 60 Overflow weir for dowelling on W3 61 Non-return barrier RF 62 Intermediate flange slide gate insertion between flanges ZS 63 Full flange slide gate as end fitting for flanging on VS 64 Fitted removal piece with 3 flanges lockable P3F 65 Fitted removal piece with 4 flanges lockable P4F 66 Slot plate SS 67 Pipes and moulded pieces FS+ FFS+ MR+ TS 68 FFR - pieces FFR 69 TT - pieces TTS 70 Q - pieces QS 71 N - pieces NS 72 International materials comparison 73 Terms of delivery and payment 74




Description Cro

ss s

ectio

n Ø

Cro

ss s

ectio

n ��

3-si

ded

seal

4-si

ded

seal

stra

ight

bed

sill

roun

d be

d

with

ste

pped

bed

Assembly versionA E K V X Y

Descending slide gate A4_ � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Descending sluice A3_ � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Dam arbor closing DE__ � � � D - E - F - G - H � � � � � �

Dam arbor closing DR__ � � � D - E - F - G - H � � � � � �

Dam arbor closing DA__ � � � A - B - C - D - F - G - H - I � � � � � �

Dam board closing TE__ � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Dam board closing TR__ � � � A - B - C - D - E - F - G - H - I � � � � � �

Throttling slide gate D4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Throttling slide gate DR4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �

Flanged threaded slide g. G4P � � � � P � � � � �

Flanged threaded slide g. G4M � � � � M � � � � �

Threaded slide gate G4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �

Threaded slide gate G4V � � � � V - W - X � � � � � �

Threaded slide gate GR4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �

Handpull slide gate H4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Handpull slide gate H4V � � � � V - W - X � � � � � �

Handpull slide gate HE4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Handpull slide gate HR4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �

Baffle plate PTA � � A - V � � � � �

Baffle plate PTE � � E - W � � � � �

Baffle plate PTP � � P � � � � �

Baffle screens PW_ � � � F - G - R � � � � �

Pump flap R_S � � � � A - E - F - P - S - V � � � � �

Adjustment slide gate RS4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Channel slide gate RE4_ � � � D - E - F - G - H - V - W - X � � � � � �

Channel slide gate RA4_ � � � A - B - C - D - F - G - H - I - V - W - X � � � � � �

Channel sluice RE3_ � � � D - E - F - G - H - V - W - X � � � � � �

Channel sluice RA3_ � � � A - B - C - D - F - G - H - I - V - W - X � � � � � �

Non-return barrier RF � � � � � � � �

Backwater flap R_H � � � � A - E - F - P - S - V � � � � �

Backwater flap R_G � � � � A - E - F - P - S - V � � � � � �

Backwater flap RK_ � � � A - E - F - P - S - V � � � � � �

Backwater flap, DN R_D � � � A - E - F - P - S - V � � � � � �

Backwater flap, WxH R_D � � � A - E - P - V � � � � � �

Slider flap SK4_ � � � � A - V � � � � �

Barscreen SR_ � � A - D - E - F - O - Q - R - S - U � � � � �

Plug sluice SE3_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Plug sluice SA3_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �

Plug sluice SA3V � � � � V - W - X � � � � � �

Plug sluice SR3_ � � � � A - B - C - D - E - F - G - H - I � � � � � �

Overflow wall TW__ � � � � � � �

01.2005

Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110Internet http.//www.ABS-Armaturen.net eMail [email protected] Seite 4

Material

Product selection

Subject to structural and technical changes, dimensions not guaranteed!

A B S - Armaturen GmbH Waste water system elements

A = AlMg3 - F22E = 1.14301K = HDPEV = St 37-2 verz.X = 1.4571Y = 1.4541

Description Cro

ss s

ectio

n Ø

Cro

ss s

ectio

n ��

3-si

ded

seal

4-si

ded

seal

stra

ight

bed

sill

roun

d be

d

with

ste

pped

bed

Assembly versionA E K V X Y

Telescpoe slide gate TKS � � � � � � �

Overflow barrier gates ÜS_ � A - B - G � � � � �

Distribution tongue VZ � � � � � � � �

Overflow weir W3 � � � � � � � �

Intermediate flange slide g ZS � � � � � �

Fitted removal piece P3F � � � � � �

Fitted removal piece P4F � � � � � �

Slot plate SS � � � � � �

Pipes + moulded pieces FS � � � � � � � �

Pipes + moulded pieces FFS � � � � � � � �

Pipes + moulded pieces MR � � � � � � � �

Pipes + moulded pieces TS � � � � � � � �

F-F-R-piece FFR � � � � � � � �

TT-piece TTS � � � � � � � �

Q-piece QS_ � � � H - R � � � � �

N-piece NS � � � � � � � �

01.2005

Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110Internet http.//www.ABS-Armaturen.net eMail [email protected] Seite 5

Material

Product selection


A B S - Armaturen GmbH Waste water system elements



A B S - Armaturen to DIN 19569 Part 4

The ABS threaded slide gate Type "G4A"

- with stepped bed - for dowelling on - wedge closing - spindle protector - seal replaceable on slider - with cut-out welding

The ABS threaded slide gate Type "GR4A" - with straight, rebate-free opening - bed for grouting in + dowelling - wedge closing - spindle protector - seal replaceable on slider - with cut-out welding

Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110



A B S DRIVES to DIN 19569 Part 4

ABS drive Type "V" - rigid plate construction

- stainless, dust and water- tight bearing housing

- spindle on roller bearings replaceable non-destructively - standardised, stainless water external tapered square shaft end size 27/ with square socket size 19 for transportable elect. drive (MEA)

ABS movement indicator for all drives - impact-resistant, ultrasound-welded plastic housing - unpowered, digital 5 mm high display - shows opened lift height directly in "mm" (e.g. for regulating gate valves) ABS drive Type "GV" - rigid wall bracket

- floating output gearing - drive can be dismantled with only 4 bolts - otherwise as drive "V" Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110



A B S – Armaturen Gm bH Waste water system elements

Housingless gates and fittings Standard DIN 19569 Part 4 DIN 19569 Part 4 r efers to the following standards 3 . General characteristics of housing-less gate devices 5.1 Loads and dimensioning 5.1.1 Structural dimensioning of closure construction 5.1.2 Drive dimensioning 5.2.1 Seals 5.2.2 Sealtightness 5.2.3 Drive rods, spindles 5.3 Durability class 5.4 Materials 8. Operation and maintenance 19704-4.2 Loading cases 19704-4.2.1 Normal operational loads (NB) 19704-4.2.2 Special operating loads (BB) 19704-5.3.1.1.b Ice formation in inland waterways 19704-5.10 Frictional forces 19704-5.10.1 Sliding friction coefficients 19704-6.4.1 General stress analysis 19704-6.4.1.1 Riveted and bolted connections 19704-6.4.1.2 Welded connections 19704-6.4.2 Stability tests 19704-6.4.3 Deformation coefficients 19704-6.4.4 Endurance limits 19704-6.5.5.2 Design procedures for flat sheets with bending loading 19704-6.5.4 Tracks 19704-6.6 Permissible stresses 19704-6.6.3 Welded seams 19704-7. Machine components 19704-7.2. Stress analysis 19704-7.2.1 Static 7.2.2 Endurance limits 7.3.1 Shafts DIN 19705-4 Materials DIN 19705-4.1 Materials for steel structures DIN 19705-4.2 Materials for machine components DIN 19705-4.3 Connections DIN 19705-5.1.3 Operation 5.1.3.4 Possibilities of checking for ice formation on locks and seals. DIN 19705-5.2 Design of steel hydraulic components DIN 19705-5.2.3 Bolted connections DIN 19705-5.2.4 Welded connections DIN 19705-5.2.4.2 Cut-out welding DIN 19705-5.2.4.3 Fillet welds DIN 19705-5.2.4.5 Basics of production DIN 19705-5.2.5 Dam walls (slider) m2 DIN 19705-5.2.6.2 Static requirements

DIN 19705-5.2.6.4 Structural requirements DIN 19705-5.3.2 Plane impact and sliding surfaces DIN 19705-5.3.3 Tilt plates and hinges (distribution tongues) DIN 19705-5.4 Seals DIN 19705-5.4.2 Structural types DIN 19705-5.4.3 Fluid mechanics requirements DIN 19705-5.4.4 Replaceability DIN 19705-5.5 Fixed parts DIN 19705-5.5.1 Types of fitting DIN 19705-5.5.3 Loading during installation DIN 19705-5.7 Drives DIN 19705-5.7.3.1 Shafts and axles DIN 19705-5.7.3.2 Counterweight equilibrium DIN 19705-5.7.3.3 Gears DIN 19705-5.7.3.4 Bearings DIN 19705-5.7.3.6 Manual drives DIN 19705-6 Vibrations DIN 19705-6.1.3 Vibrations in undercurrents DIN 19569 Teil1-3 Structures DIN 19569 Teil1-3.1 Dimensional tolerances DIN 19569 Teil1-3.2 Raceways DIN 19569 Teil1-3.2.1 Surface pressure DIN 19569 Teil1-3.3 Connection of technical fittings with the structure DIN 19569 Teil1-4 Technical equipment DIN 19569 Teil1-4.1 Principles of static and mechanical design DIN 19569 Teil1-4.1.1 Loads DIN 19569 Teil1-4.1.1.4 Operational loads DIN 19569 Teil1-4.1.2.1 Capacity, torque DIN 19569 Teil1-4.1.2.2 Application factors DIN 19569 Teil1-4.1.2.3 Designed service life of machine components DIN 19569 Teil1-4.2 General construction characteristics DIN 19569 Teil1-4.2.1 Walkways DIN 19569 Teil1-4.2.8 Materials and corrosion protection DIN 19569 Teil1-4.2.9 Requirements for the production of welded structures. DIN 19569 Teil1-7 Spare parts (wear and reserve parts)





ABS designation code

1. Group = fitting type (see list of contents or page 23 onwards)

2 . Group = fitting version (z.B.: A = dowel-mounted; E = grouted-in etc.)

3 . Group = sectional opening DN (circular – dimensions in mm) or B x H (rectangular – dimensions in decimetres)

4 . Group = material code A = AlMg3 – F22

E = 1.4301

K = HDPE

V = St 37-2 galv.

X = 1.4571

Y = 1.4541

5 . Group = drive (e.g. V = tapered square shaft end; SV = valve box etc.)

Example: GR4 A 0600 E – V GR4 = threaded slide gate (page 30) with round bed – no-groove grouted in; otherwise dowelled on

A = dowelled on – see fitting versions on appropriate product sheet

0600 = bore DN 600 (dimensions in mm)

E = material (see above) E = 1.4301

V = drive (see pages 12 – 22)

RE3 D 07x12,5 X – TV

RE3 = channel sluice (page 36)– for no-groove on-site grouting in

D = one sited dowelled on – see fitting versions on appropriate product sheet

07x12,5 = bore B x H (dimensions in dm [decimeter])

X = material (see above) E = 1.4571

TV = drive (see pages 12 – 22)




GR4 A 0200 e - V

Drive e.g. V = tapered square shaft end

Material e.g. E = 1.4301

Sectional opening DN or BxH

Fitting versions e.g. A = dowel-mounted

Fitting type e.g. GR4_

Example:

ABS-Armaturen GmbH – Electr. mobile drive to Euro Norm 50144 Part 1

Accident prevention system using two interlinked power switches in handles Specifications Weight: 5.5 kg Torque: 20-130 Nm Width: 640 mm Height: 300 mm Materials used Housing: aluminium 4m long power cable Electrical data: air- cooled universal motor Rated voltage: 230 V, 50 Hz Rated current : 5.6 A Power rating :1200 W Nominal speed : 75 rpm Fittings 1. Two power switches 2. Infinitely variable potentiometer 3 . Revolution counter 4 . Reset button counter 5 . Alignment spirit level 6. Secured tool square end size 19 Patented accessories/stainless steel A. Adapter for square protector 27/32 B. Telescopic wrench handle C. Adapter for 19mm wrench D. Adapter for 27mm wrench E. 3-spoked handwheel receptacle F. 4-spoked handwheel receptacle G. 5-spoked handwheel receptacle H. Aluminium machine case I. V2A foot stands above 100 Nm J. V2A sack barrow K. Emergency generator 2 kW/32 kg L. Higher torques up to 180 Nm M. Wrench adapters 12 - 27 mm Tender text Electric mobile drive, continuous running (air cooled) with 230 V/50 Hz incl. 4m cable and earthed socket, max. 6 kg service weight. Accident prevention system using using two interlinked power switches in handles and automatic electrical cutoff once infinitely variable adjustable torque of between 20 and 130 Nm has been reached. Counter for right-hand and left-hand running with reset button. Accessories from A bis L

Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 300510 . Fax +49 5731 3005110


• Emergency drive

• 130 Nm torque

• 230 V/ 50 Hz, earthed socket

• counter right/left

• alu- housing (rustproof)

• 5.5 kg service weight

• operationally safe using two independent power switches


Torque adjustment

01234 6

78910

50: 30 Nm 6: 90 Nm 1: 40 Nm 7: 100 Nm 2: 50 Nm 8: 110 Nm 3: 60 Nm 9: 120 Nm 4: 70 Nm 10: 130 Nm 5: 80 Nm


ABS position indicator device This position indicator device has everything you need!

- no power, purely mechanical.

- installed directly below drive tapered square shaft end

- impact-resistant plastic housing ultrasound-welded.

- 6-figure display shows opening in mmFor regular threads Tr24x5, Tr40x7, Tr50x9.

- 5 mm high display numbers

- can be retrofitted!

- maintenance-free! _____________________________

Closed position = Display 000000

Open position = Display 001750

The valve has opened 175 mm. _____________________________ Application:

anywhere where the valve cannot be seen, e.g.:precast manholes, road valve boxes etc

for adjustment and throttling slide gates to set lift to be opened for intended outflow.

for descending sluices in order to determine spillway or spillway quantity.

________________________________________________________________________ The position indicator advice is worth using, not just because of its low price, but because

it prevents the valve being overtightened when closing (Position indicator device closed =000000).





ABS Below-floor drives to DIN 19569 Part 4

00000

max.30° max.30°

100

100

X

X

V UV

Floor Floor

FloorFloor

W AF27/32

W AF27/32

square19

Roller bearing below-floor drive with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing below-floor drive with stainless cardan joint and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

GV GK

X

WAF27/32

100

F loorFloor

300

F loorFloor

Roller bearing below-floor drive with spur gear unit and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing below-floor drive bevel gear and stainless steel hand crank x = optionally with position indicator device (see P. 11)



Subject to structural and technical changes, dimensions not guaranteed! 01.2005



GMK GME

Floor Floor Floor Floor

Roller bearing below-floor drive with bevel gear, pressure-tight wall passage and extended stainless steel hand crank

Roller bearing below-floor drive with bevel gear, pressure-tight wall passage and electric actuator

E

900

EM

FloorFloor

Floor

Roller bearing below-floor drive with electric or pneumatic actuator

Explosion-protected drive with on-site control for operation extended from explosion protection zone Cable length: with RWG = max. 100m with MWG = max. 10m






270

270

50

X

G SVSV

F loor

F loor F loor

W AF27/32

Roller bearing below-floor drive in street casing with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square ends (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing below-floor drive with spur gear unit and street casing with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square ends (ratchet)

G R SV

270

F loorF loor

X

G E

Floor

Ceiling

Roller bearing below-floor drive with spur gear unit, pressure-tight tube column and street casing with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing below-floor drive with bevel gear and electric actuator





ABS Above-floor drives to DIN 19569 Part 4

15010

0

X

H MV

Floor Floor

Floor

W AF27/32

Roller bearing above-floor drive with handwheel x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive on wall deck with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

100

M10

GKR GKL ME

X

F loor FloorFloor Floor

Roller bearing above-floor drive on wall deck with bevel gear with right-hand extended stainless steel hand crank. Optionally available in left-hand version (GKL) x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive on wall deck with electric or pneumatic actuator X = Hight dependent on motor type






900

900

X

WV WH

FloorFloor FloorFloor

WAF27/32

Roller bearing above-floor drive with wall-floor column and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with wall-floor column and handwheel x = optionally with position indicator device (see P. 11)

900

900

X

W GK W GKLW GKR

Floor Floor Floor Floor

Roller bearing above-floor drive with wall-floor column and bevel or worm gear and stainless steel hand crank x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with wall-floor column and bevel or worm gear and right-hand extended stainless steel hand crank Optionally available in left-hand version (WGKL) x = optionally with position indicator device (see P. 11)






900

900

WGE WE

Floor Floor FloorFloor

Roller bearing above-floor drive with wall-floor column, bevel gear and electric actuator

Roller bearing above-floor drive with wall-floor column and electric or pneumatic actuator






Floor

900

WAF27/32

X

900

F loor

X

FV FH

Roller bearing above-floor drive with stand-floor column and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with stand-floor column and handwheel x = optionally with position indicator device (see P. 11)

Floor Floor

900

F loor

900

X

FGK FE

Roller bearing above-floor drive with stand-floor column and bevel or worm gear and stainless steel hand crank x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with stand-floor column and electric or pneumatic actuator





ABS Above-floor drives to DIN 19569 Part 4 90

0

X X

THTV

W AF27/32

Floor FloorFloor

900

F loor

Roller bearing above-floor drive on cross beam with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with cross beam and handwheel x = optionally with position indicator device (see P. 11)

900

900

TGKM TE

X

FloorFloor

FloorFloor

Roller bearing above-floor drive with cross beam, central bevel gear with stainless steel hand crank x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with cross beam and electric or pneumatic actuator






900

900

X

TGKLTGKR TGELTGER

Floor FloorFloor

Roller bearing above-floor drive with cross beam, bevel gear and right-hand side extended stainless steel hand crank Optionally available in left-hand version (TGKL) x = optionally with position indicator device (see P. 11)

Roller bearing above-floor drive with cross beam, bevel gear and right-hand side extended electrical actuator Safety covering to UVV Optionally available in left-hand version (TGEL)

900

900

T2GH T2GK

Floor

Floor

2-spindle Roller bearing above-floor drive with cross beam, bevel gears and handwheel Safety covering to UVV

2-spindle Roller bearing above-floor drive with cross beam, bevel gears and stainless steel hand crank Safety covering to UVV x = optionally with position indicator device (see P. 11)






900

900

T3GELT3GER T4GKLT4GKR

FloorFloor

Roller bearing above-floor drive with cross beam with central bevel gear, right-hand side extended bevel gear in addition to bevel gear at operating height with electrical actuator. - Safety covering to UVV Optionally available in left-hand version (T3GEL)

Roller bearing above-floor drive with cross beam, bevel gears, right-hand side extended bevel gear in addition to bevel gear at operating height with stainless steel hand crank. - Safety covering to UVV Optionally available in left-hand version (T4GKL)

900

900

T3GKLT3GKR T4GELT4GER

FloorFloor

Roller bearing above-floor drive with cross beam with central bevel gear, right-hand side extended bevel gear in addition to bevel gear at operating height with stainless steel hand crank. - Safety covering to UVV Optionally available in left-hand version (T3GKL)

Roller bearing above-floor drive with cross beam, bevel gears, right-hand side extended bevel gears in addition to bevel gears at operating height with electrical actuator. - Safety covering to UVV Optionally available in left-hand version (T4GEL)

Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110 Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 21




900

900

T2GE TZ

Floor

Floor Floor

2-spindle Roller bearing above-floor drive with wall-floor column, bevel gears and electric actuator Safety covering to UVV

Above surfave drive with cross beam and pneumatic or hydraulic cylinder

SS EBG

100

270

F loor

W AF

Tub

e ov

erla

p

Drive with rapid-closing lever Telescopic mounting accessories for

underground fittings





ABS Drive-Protective covers – H _

Type: -H1

Torsionally rigid swivel cover for gears

Optionally with lock

Type: -H2

Torsionally rigid swivel cover for actuators

Optionally with lock

Type: -H3

Torsionally rigid rectangular or circular housing

Optionally with lock 01.2005 Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110



900

A B S – Armaturen GmbH Waste water system element s

Sto

rag

e le

vel +

pa

ne

l he

igh

t

Fra

me

he

igh

t

C lear w idth

Fram e w id th

Ha

nd

leA

A

Ha

nd

le

Fram e w idth

Clear w id th

Fra

me

he

igh

t

Sto

rag

e le

vel +

pa

ne

l he

igh

t

AC

on

du

it d

ep

th

Co

nd

uit

de

pth

he

igh

t

he

igh

tS

tep

pe

db

ed

ABS PLUG SLUICE Type: SE3 _ + SA3_ to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Clas s 2 For grouting into rebates to DIN 19556 or

dowelling onto structures with flat surfaces in accordance with DIN 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frames which grip across the frames.

Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening- ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals!

Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction.

HDPE slide rails = Bolted onto slider plate, can be readjusted.

Optional = Locking device = Pre-rounded to manhole diameter

CAUTION = Manual pulling power is sufficient for only max. 1m x 1m gate area.



Dowelling with stepped bed

01.2005

No-groove grouting

Type: SE3 _ Type: SA3 _

Assem b ly versions


A B S – Armaturen GmbH Waste water system eleme nts

Clear w id th

Ha

nd

le

Fram e w id th

AA

A

Sto

rag

e le

vel +

pa

ne

l he

igh

t

Fra

me

he

igh

t

Co

nd

uit

de

pth

Clear w idth

Ha

nd

le

Fram e w idth

Sto

rag

e le

vel +

pa

ne

l he

igh

t

Fra

me

he

igh

t

Co

nd

uit

de

pth

Ste

pp

ed

be

d

he

igh

t

he

igh

t

ABS PLUG SLUICE Type: SR3 _ + SA3_ to DIN 19569 Part 4


dowelling onto structures with flat surfaces in a ccordance with DIN 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frames which grip across the frames.

Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening- ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals!

Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.

HDPE slide rails = Bolted onto slider plate, can be readjusted.

Optional = Locking device = Pre-rounded to manhole diameter

CAUTION = Manual pulling power is sufficient for only max. 1m x 1m gate area.



Dowelling with stepped bed

01.2005

No-groove grouting

Type: SR3 _ Type: SA3 V

Assem bly versions



20

0

200 200

Co

nd

uit

de

pth

Fram e w id th

Lift

ing

he

igh

tG

ag

e le

ng

th

70

Ste

pp

ed

be

d1

06

FloorFloor

Ga

ge

len

gth

Lift

ing

he

igh

t

Fram e w id th

Grout on site

DN

o.

WxH

ABS HANDPULL SLIDE GATE Type: HR4 _ + H4_ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling onto structures with flat surfac es in accordance with DIN 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.

slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!


Wedge closing = Safe, low-wear closing type for soft seal fittings.

Optional = Pre-rounded to fit manhole diameter Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110


01.2005

Type: HR4 _ Type: H4 A

Assem b ly versions



Ga

ge

len

gth

Lift

ing

he

igh

t5

0

10

0

70Floor

Fram e w id th

Co

nd

uit

de

pth

DN

o.

WxH

ABS HANDPULL SLIDE GATE Type: HE4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 Bed no-groove grouting, otherwise dowel onto struct ure with flat surfaces in accordance

with DIN 18202 Tab.3





Optional = Pre-rounded to fit manhole diameter Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110


01.2005

Assem b ly versions



10

0

Ga

ge

len

gth

1 0 0

20

0

2 0 0 2 0 0

Co

nd

uit

de

pth

Fra m e w id th

Lift

ing

he

igh

tS

tep

pe

d B

ed

10

6

DN

o.

BxH

10

0

Ø Se w e r

ABS HANDPULL SLIDE GATE Type: H4 V to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto structures with rounded, flat surfaces in accordance

with DIN 18202 Tab.3







01.2005


Assembly versions


ABS THREADED SLIDE GATE Type: G4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal C lass 4

For dowelling with stepped bed onto struc tures with flat surfaces in accordance with DIN 182 02 Tab.3





Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110


01.2005

20

0

200 200

Co

nd

uit

de

pth

Fram e w id th

Lift

ing

he

igh

t

70

Ste

pp

ed

be

d1

06

Fitt

ing

de

pth

DN

o.

WxH

Assem bly versions



ABS THREADED SLIDE GATE Type: GR4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Cl ass 4

Bed no-groove grouting, otherwise dow el onto structure with flat surfaces in accordance with DIN 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames. Bed = The bed plate is rolled to the nominal diameter radius and welded to the frame. Particularly suitable for storm water channels and masonry manholes. slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!

Seal = One-piece, made of NBR is oil and acid-resistant and foodsafe. Shape and force positive, protected against extraction and can be unbolted without destruction.




01.2005

Assem bly versions

10

0

DN

70

80

25

Co

nd

uit

de

pth

Fitt

ing

de

pth

Lift

ing

he

igh

t

Fram e w id thGrout on site

No groove



ABS THREADED SLIDE GATE Type: G4 V to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto struct ures with rounded, flat surfaces in accordance with

DIN 18202 Tab.3







01.2005

Assem bly versions

70

Fitt

ing

de

pth

DN

o.

WxH

10

6S

tep

pe

d b

ed

Lift

ing

he

igh

t

Fram e w id th

Co

nd

uit

de

pth

200200

20

0

70

Ø Sewer



ABS SLIDER FLAP Type: SK4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto st ructures with flat surfaces in accordance with DIN 18202 Tab.3


slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against withdrawing and can be unbolted without destruction.




01.2005

7 0

DN

7056

5 - 1 0 °Lift

ing

he

igh

tS

tep

pe

d b

ed

Co

nd

uit

de

pth

Fitt

ing

de

pth

Tip - o ve r p re ve n tio n

F ittin g le n g th

F ra m e w id th

Assem b ly versions



ABS FLANGED THREADED SLIDE GATE Type: G4 P + G4M to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For flange connections with and without fl ange to EN 1092 PN10


slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.




01.2005

Co

nd

uit

de

pth

Fitt

ing

de

pth

DN

70

X

10

6

Ste

pp

ed

be

d

Fitt

ing

de

pth

Y

S

Y+ 70

Lift

ing

he

igh

t

Fram e width

Co

nd

uit

de

pth

DN

Circular or flatsewer wall

Circular or flatsewer wall

Please state! X


Type: G4 P Type: G4 M


ABS ADJUSTMENT SLIDE GATE Type: RS4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling onto structures with flat sur faces in accordance with DIN 18202 Tab.3

or for on-site grouting into rebates to DIN 1955 6


slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes.

Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Regulation = of the undercurrent outlet quantity using adjustable wedge slide rail, which guarantees linear constant seal pressure which acts on three or four sides.

Drive = Adjustable to plumb



01.2005

Assembly versions


Fitt

ing

de

pth

10

6S

tep

pe

d b

ed

70

Lift

ing

he

igh

t

Fram e w id th

Co

nd

uit

de

pth

200200

20

0

Seal

Clear w id th

HDPE g lide strip

Clear w id th

HDPE g lide strip

Coach b olt

Guide fram e

Slider p late

Guide fram e

Coach b olt

Slider p late

Seal

DN

o.

WxH


ABS THROTTLING SLIDE GATE Type: D4 _ + DR4_ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto st ructures with flat surfaces in accordance with DIN 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frames which grip across the frames. Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.

Drive = Adjustable to plumb Position indicator device = Shows opening in "mm". Hydraulic = For intended outflow of __ l/s at water head (WSV or WSR) of __ mm.

calculation Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110



20

0

200 200

Co

nd

uit

de

pth

Fram e w id th

Lift

ing

he

igh

t70

Ste

pp

ed

be

d1

06

Fitt

ing

de

pth

00000

Square

DN

o.

WxH

A s s e m b ly ve rs io n s


ABS CHANNEL SLUICE Type: RE3 _ to DIN 19569 Part 4

Sealing on three sides in accordance with Sea l Class 3

For no-groove, on-site grouting into rebates to DIN 19556

Torsionally rigid = Section is cold worked and grouted in on site. single-part frames Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.



01.2005

90

0C

on

du

it d

ep

th

Sto

rag

e le

vel +

p

an

el h

eig

ht

Clear w idth + 160

Fram e w idthClear w idth

80

80

Lift

"Bed seal"

W SR

70

W SV

A ssem b ly versions



ABS CHANNEL SLUICE Type: RA3 _ to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Class 3

For dowelling with stepped bed onto structures with flat surfaces in accordance with DI N 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames. Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.




01.2005

Lift

Co

nd

uit

de

pth

Fram e w idth

Clear w idth

Sto

rag

e le

vel +

pa

ne

l he

igh

t

90

0

W SV

"Bed seal"

W SR

Assem bly versions



ABS CHANNEL SLIDE GATE Type: RE4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For no groove, on-site grouting into rebates to DIN 19556

Torsionally rigid = Section is cold worked and grouted in on site. single-part frames Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.




01.2005

Co

nd

uit

de

pth

90

0

Lift

ing

he

igh

t

C lear w id thFram e w id th

Clear w id th + 160

80

Gro

utin

g h

eig

ht

80

Min

imu

m 1

00

Cle

ar

he

igh

t

"Bed seal"

"Horizontal seal"

70

W SV

W SR


Assem bly versions


ABS CHANNEL SLIDE GATE Type: RA4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto structures with flat surfaces in accordance with DI N 18202 Tab.3

Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames. Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.




01.2005

90

0

Fram e w id th

Lift

ing

he

igh

t

Clear w id th

Co

nd

uit

de

pth

Min

imu

m 1

00

"Bed seal"

Cle

ar

he

igh

t

"Horizontal seal"

70

W SR

W SV

Assem bly versions



ABS DESCENDING SLUICE Type: A3 _ to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Clas s 3 For dowelling onto structures with flat surface s in accordance with DIN 18202 Tab.3




Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Regulation = of the overflow outlet quantity using adjustable wedge slide rail, which guarantees linear constant seal pressure which acts on three sides.

Limit stops = Destruction-free removable limit stops for "open" and "closed".



01.2005

Clear w id th

HDPE g lide strip

HDPE g lide strip

M1

0M

10

M1

0

Co

nd

uit

de

pth

90

0

De

sce

nd

ing

fr

ee

sp

ac

e

Fram e w id th

Clear w id th

M1

0

Clear w id th

Coach bolt

Coach bolt

De

sce

nd

ing

lift

Slider p la te

Slider p la te

Seal

Seal

Sto

rag

e le

vel +

pa

ne

l he

igh

t Guide fram e

Guide fram e

Assem b ly versions



ABS DESCENDING SLIDE GATE Type: A4 _ to DIN 19569 Part 4

Sealing on four sides in accordance with Seal Class 4 For dowelling onto structures with flat surfac es in accordance with DIN 18202 Tab.3




Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Regulation = of the overflow outlet quantity using adjustable wedge slide rail, which guarantees linear constant seal pressure which acts on three or four sides.

Limit stops = Destruction-free removable limit stops for "open" and "closed".



01.2005

Fram e w id th

Clear w id th

Cle

ar

he

igh

t

HDPE g lide strip

De

sce

nd

ing

fre

e s

pa

ce

90

0

De

sce

nd

ing

lift

Min

imu

m 1

00

Co

nd

uit

de

pth

Coach bolt

M1

0M

10

Clear w id th

Clear w id th

HDPE g lide strip

Coach bolt

Guide fram e

Guide fram e

Slider p late

Slider p late

Seal

Seal

Assem bly versions



ABS DAM ARBOR CLOSING Type: DE _ _ + DR_ _ to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Clas s 1 For grouting into rebates to DIN 19556

Guide frame = U-section cold worked and grout in on site. Bed sill = No-groove grout in on site. Stoplog device = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) and material selection see sketch. Bed arbor with bed seal for further arbors with arbor seal for any outlet side. Oak arbors possible with tongue and groove (stainless). Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. Outlet rail = Low-wear made in HDPE/black. Bouyancy protection = Prevents top arbor floating up in flood conditions. Pressing device = Presses in each case the upper dam arbor.

Arbor lifter (2 pieces) = For placing or removing the dam arbors.



C lear w id th

Co

nd

uit

de

pth

Ma

x. s

tora

ge

leve

l

Fra

me

he

igh

t

Doub le sid ed sea l fo r c hang ing flow d irec tion

O ne sea l and one p ressu re ra il fo r s ing le flow d irec tion

W SV

W SV

W SR

30

0

5 0

A LU1

15

0

9 0

22

5

150

A LU2

ALU3

W id th

Oak tree

V2A+ V4A

W id th

A rb o r typ es

Grout on siteO p tiona lly w ithre lie f g a te

O p tiona lly w ithp ressing d evic e

A lM g Si 0 ,5- F228 ,51 kg /m

A lM g Si 0 ,5- F227,26 kg /m

A lM g Si 0 ,5- F2211,17 kg /m

800 kg /m ³Dry

Floor

Bed sea l

Typ e : DE2E

Typ e : DE1E

Horizonta l sea l

He

igh

tH

eig

ht

Type: DE2E

Type: DE1E

Assem bly versions



ABS DAM ARBOR CLOSING Type: DA _ _ to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Clas s 1 For dowelling with stepped bed onto stru ctures with flat surfaces in accordance with DIN 18 202 Tab.3

Guide frames = U-sections cold worked and stiffened with welded anchor tabs. Bed section = For grouting on with stepped bed. Stoplog device = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) and material selection see sketch. Bed arbor with bed seal for further arbors with arbor seal for any outlet side. Oak arbors possible with tongue and groove (stainless). Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. Outlet rail = Low-wear made in HDPE/black. Bouyancy protection = Prevents top arbor floating up in flood conditions. Pressing device = Presses in each case the upper dam arbor. Arbor lifter (2 pieces) = For placing or removing the dam arbors.



01.2005

M10

C le a r w id th

Co

nd

uit

de

pth

Ma

x. s

tora

ge

leve

l

Fra

me

he

igh

t

W SV

W SV

W SR3

00

5 0

A L U 1

15

0

9 0

22

5

1 5 0

A L U 2

A L U 3

He

igh

tW id th

O a k tre e

Ste

pp

ed

be

d

A rb o r typ e sFlo o r

W id th

V 2 A + V 4 A

He

igh

t

A lM g S i 0 ,5 - F2 2

D ry8 0 0 k g /m ³

1 1 ,1 7 k g /m

A lM g S i 0 ,5 - F2 2

A lM g S i 0 ,5 - F2 2

7 ,2 6 k g /m

8 ,5 1 k g /m

B e d s e a l

D o u b le s id e d se a l fo r c h a n g in g flo w d ire c tio n

O n e se a l a n d o n e p re ssu re ra il fo r s in g le flo w d ire c tio n

Type: DA2A

Type: DA1A


Assem b ly versions


ABS DAM BOARD CLOSING Type: TE _ _ + TR_ _ to DIN 19569 Part 4


dowelling onto structures with flat surfaces in accordance with DIN 18202 Tab.3

Guide frames = U-section cold worked and grout in on site. Bed sill = no-groove grouting in on site or dowelling on with stepped bed. Stoplog = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) and material selection see sketch. Dam board with bed seal and side seal for any outlet side. Oak board possible with tongue and groove (stainless). Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. Outlet rail = Low-wear made in HDPE/black. Bouyancy protection = Prevents dam board floating up in flood conditions. Panel lifter (2 pieces) = Lifting eyes for placing or removing the dam board.




A ssem b ly vers ions

W SV

W SV

W SR

30

0

50

ALU1

15

0

90

22

5

150

ALU2

ALU3

V2A+ V4A

AlM gSi 0,5-F228,51 kg/m



800 kg /m ³

Doub le sided seal for changing flow d irection

One seal and one pressure rail for sing le flow d irection

Floor

Ma

x. s

tora

ge

leve

lF

ram

e h

eig

ht

Co

nd

uit

de

pth

Bedseal

Grout on siterelief gate

He

igh

t

W id th

He

igh

t

W id th

Oak tree

Board types

Clear w id th

Optionally w ith

Optionally w ithpressing device

Type: DT2E

Type: DT1E

DryType: TE2E

Type: TE1E

A B S – Armaturen Gmb H Waste water system elements

ABS DAM ARBOR - SELECTON TABLE

Aluminium - dam arbor Al Mg Si 0,5- F22



ALU 1 ALU 2 ALU 3

Sto

rage

leve

l (m

)

Conduit width (m)

ALU 1

ALU 2

ALU 3

EPDM seal

For a deflection of 1/150 of the conduit width

Max. holdup cross section in utilisation of the permissible tensions

01.2005

SELECTION TABLE



ABS BACKWATER FLAP DN Type: R _D to DIN 19569 Part 4

Four-sided sealing through protruding water head to Seal Class 3 For dowelling with stepped bed onto str uctures with flat surfaces in accordance with DIN 1 8202 Tab.3

Flanged connections = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.

Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.

Flap panel = To structural requirements (water head maximum one-sided from front (WSV)) stiffened with welded-on reinforcing ribs and sectional welding processes. Flap panel with handle and fitted with tip-over prevention.

Option = larger bores and low-pressure flap.

Automatic opening and closing using water head in front and behind flap panel.



01.2005

W idth

A5-10°

Fitting length

He

igh

tW SV

Tip -over p revention

DN


Assem bly versions

doweled flangedcast in clutched doweled doweled cast in

discharge unit


ABS BACKWATER FLAP WxH Type: R _D to DIN 19569 Part 4

Four-sided sealing through protruding water head to Seal Class 3 For dowelling with stepped bed onto str uctures with flat surfaces in accordance with DIN 1 8202 Tab.3







01.2005

5-10°W SV

Fitting leng th

Cle

ar

he

igh

t

He

igh

t

Fra

me

he

igh

t

Clear w id th

Fram e w id th

Tip -over prevention


Assem bly versions discharge unit

doweled cast indoweled doweledcast in


ABS BACKWATER FLAP DN Type: R _H to DIN 19569 Part 4

Four-sided sealing through protruding water head to Seal Class 3 For dowelling with stepped bed onto stru ctures with flat surfaces in accordance with DIN 18 202 Tab.3

Flanged connection = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.

Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and form-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.

Hollow cover = Designed to structural requirements (water head maximum one-sided from front (WSV)). Hollow cover with handle and fitted with tip-over prevention. Hollow cover has filling and draining connections

for filling with antifreeze or sand.


Time of flap opening can be influenced by filling the cover.



01.2005

Fitting length W idth

A5-10°

W SV

Tip-over prevention

He

igh

tD

N


Assem bly versions

doweled flangedcast in clutched doweled doweled cast in

discharge unit


ABS BACKWATER FLAP DN Type: R _G to DIN 19569 Part 4

Four-sided sealing through protruding water head to Seal Class 3

For dowelling with stepped bed onto st ructures with flat surfaces in accordance with DIN 18202 Tab.3

Flanged connection = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.


Flap panel = To structural requirements (water head maximum one-sided from front (WSV)) stiffened with welded-on reinforcing ribs and sectional welding processes. Flap panel with handle and counterweight

and fitted with tip-over protection. Counterweight has filling and draining connections for filling with antifreeze or sand.


Time of flap opening can be influenced by filling the counterweight.




W idthFitting length

He

igh

t

5-10°

Swivel

AW SV

space

Tip-over p revention

Pipe length

DN

Assem bly versions

doweled flangedcast in c lutched doweled doweled cast in

discharge unit


ABS BACKWATER FLAP DN Type: RK _ to DIN 19569 Part 4

Four-sided sealing through protruding water head to Seal Class 3 For insertion in KG sleeves



Hollow cover = Designed to structural requirements (water head maximum one-sided from front (WSV)). Hollow cover with handle and fitted with tip-over prevention. Hollow cover has filling and draining connections

for filling with antifreeze or sand.


Time of flap opening can be influenced by filling the cover.




WidthFitting length

WSVH

eig

ht

Tip-over prevention

DN

Assem bly versions


discharge unit


ABS PUMP FLAP Type: R _S to DIN 19569 Part 4

Four-sided sealing through protruding water head to Seal Class 3

With impact damper, for flanging onto flan ge in accordance with EN 1092 PN10

Flanged connections = with 5-10 ° inclination, welded-on flange and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.



Impact damper = Pneumatic, functions automatically Automatic opening and closing using water head in front and behind flap panel.




He

igh

t

Im pact dam per

Fitting leng th

Tip-over p recention

5-10°

W idth

W SV

Flange in accordance w ith EN 1092 PN10

DN

Assem bly versions


discharge unit


BarØBar spacingBarØBar spacing

Channel spaceChannel space

Bar spacing angle

Cle

ar th

roug

hflo

w h

eigh

t

Clear throughflow width Clear throughflow width

BarØ

Clear throughflow width

Cle

ar th

roug

hflo

w h

eigh

t

Cle

ar th

roug

hflo

w h

eigh

t10

0

ABS Barscreen Type: SR _ for circular and rectangular openings, for do welling on

Type: SR A Type: SR D Type: SR E

Type: SR Q Type: SR S Type: SR R Barscreens for inclined openings with channel space Type : SRO Type: SR U Type: SR F Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110



DN DN

Bar Ø Bar Ø

100Channel space 100

Bar spacing Bar spacing Bar spacing

100Channel space

Bar Ø

DNDNDN

Bar spacingBarØBarØ

Bar spacingBarØ

Bar spacing

100

100

100D

N w

hen

incl

ined

1:1

,5 (

heig

ht=

1+le

ngth

=1,

5)


ABS OVERFLOW BARRIER GATES Type: ÜS _ to DIN 19558

For curved and straight structures

Overflow height in mm

Outlet quantity in m³/h

30 32,59 25 24,79 20 17,74 15 11,52 10 6,27 5 2,22



A=

min

d.1

00

S SS

A=

min

d.1

00

S

10

0

H

+2

5-2

5

-25

+2

5

-25

+2

5

-25

+2

5

10

0

A=

min

d.1

00

10

0

10

0

A=

min

d.1

00

H

H H

Sea l Sea l Sea l Sea l

Fixing ra il on s iteFixing ra il on s ite

90° 100 50

50

50

5015050

100

65

15

300 300

+/-

25

min

. 1

20

Flur

min

. 2

20

Tooth form A Tooth form B

Tooth form Y

Straight

01.2005

- By hydraulic oscillation (wind) considerably more evenly outflow

- 24% higher oxygen intake as tooth shape A

Fixings

Sill with clamp holder and anchor rail

Sill with clamp holder for dowelling on

Sill with anchor rail Sill for dowelling on


Sill joint with H-seal

Outflow per metre of barrier gate

Type ÜS_KH Type ÜS_KA Type ÜS_H Type ÜS_A

Type ÜSA Type ÜSB

Type ÜSY Type ÜSG


Ü Ü

S

S

(3 0 0 )

+2

5-2

5

+2

5-2

5

+2

5-2

5

SS

(3 0 0 )

W a te r le v e l W a te r le v e l

W a te r le v e l

W a te r le v e l

He

igh

t

He

igh

t

S e a l S e a l

He

igh

t

He

igh

t

W a ll s p a c in gW a ll s p a c in g

min

.10

0

min

.10

0

ABS OVERFLOW WALL Type: TW _ _ to DIN 19558

For curved or straight structures




Type: TW GA Type: TW GH

Hung from deck underside Elevated

Type: TW RA Type: TW RH

Type: TW GD Type: TW GS Type: TW RD Type: TW RS

Overflow wall joint with H-seal


ABS BAFFLE PLATE Type: PT A

For dowelling onto structures with flat surfaces in accordance with DIN 18202 Tab. 3



DN EBL e Øg 0080 100 80 220 0100 125 100 250 0125 130 100 275 0150 130 100 300 0175 135 100 325 0200 140 100 350 0250 145 100 400 0300 170 120 450 0350 210 150 500 0400 245 180 550 0450 300 225 600 0500 335 250 700


DN

e

EBL

2,5°

Øg

Assem b ly versions

dow eled dow eled


ABS BAFFLE PLATE Type: PT E

With masonry pipes, for flanging on with flange to EN 1092 PN10 or dowelling on.



DN EBL L a b e Øg ØA 0080 300 200 100 150 80 220 180 0100 375 250 100 180 100 250 200 0125 380 250 100 180 100 275 230 0150 430 300 100 230 100 300 260 0175 435 300 100 230 100 325 285 0200 440 300 100 230 100 350 310 0250 445 300 100 230 100 400 365 0300 570 400 150 280 120 450 415 0350 610 400 150 280 150 500 450 0400 645 400 150 280 180 550 500 0450 700 400 150 280 225 600 550 0500 835 500 150 380 250 700 600


Assem bly versions

cast in cast in

aD

N

L

e

ØA

b

EBL

2,5°

Øg

Wall deck


ABS BAFFLE PLATE Type: PT P

For flanging onto flanges to EN 1092 PN10



DN EBL e Øg 0080 100 80 220 0100 125 100 250 0125 130 100 275 0150 130 100 300 0175 135 100 325 0200 140 100 350 0250 145 100 400 0300 170 120 450 0350 210 150 500 0400 245 180 550 0450 300 225 600 0500 335 250 700


DN

e

EBL

2,5°

Øg


a

AA

e

M1

0M

10

M1

0M

10

EBL

L

60°

30°

Bo

re

TubeØ

W idth

He

igh

t

ABS BAFFLE SCREENS Type: PW _ For dowelling onto circular and straight structures in accordance with DIN 18202 Tab. 3

Type: PW R Type: PW G

S up to DN450mm = 3 thick, above 4 thick

Stable, re-adjustable version for dowelling on to s tructures in accordance with DIN 18202 Tab.3

Type: PW F





ABS TELESCOPE SLIDE GATE Type: TKS to DIN 19569 Part 4

For flange connections with flange to EN 1092 PN 10

Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against withdrawing and can be unbolted without destruction.




DN

d

L1L2

L3

900

Drive e.g.floor column with handwheel

Dust and splashproof rollingaxial bearing, stainless

Stainless steel spindle

Spindle nut RG 7

Spindle protection tubeas required

Axial expansion rubber

Core hole

Con

duit

dept

h

Lift

Vertical pipe

Sealing flange

Torque tube / slip tube

Inlet funnel (optional)

Connection to on-site flange to EN 1092 PN 10other connections available

ABS-Armaturen

GmbH ABS DISTRIBUTION TONGUE Type: VZ

to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Class 1 For dowelling onto structures with flat s urfaces in accordance with DIN 18202 Tab.3

Bracket = Blank is cold-worked and stiffened.

Tongue = Without ribs on both sides, smooth tongue walls to structural requirements (water head from maximum one side (WS)) with inside welded reinforcing ribs designed for sectional welding processes.

Seal = Made of NBR, is oil and acid-resistant and food safe. Replaceable non-destructively

Bearing = Rg7 Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110


M8

M 16

M8

90

0

M 16

M8

M8

M12

M1

2

WS

ma

x.

WS

ma

x.

20

0

20

0

FloorFloor Floor Floor

w orm gearsDrive e.g . floor colum n w ith

Drive e.g . w orm gearsand hand c rank

w ith handw heel in m anhole

Co

nd

uit

de

pth

Co

nd

uit

de

pth

Bla

de

he

igh

t

Bla

de

he

igh

t

Blade leng thBlade leng th W id thW id th SealSeal

Channel w id th outlet




Sw ivelang le

Sw ivelangle

Optional Op tionald issipation console

d issipation console

Ch

an

ne

l wid

th in

let

Ch

an

ne

l wid

th in

let

Le

ng

th

Le

ng

th



ABS OVERFLOW WEIR Type: W3 to DIN 19569 Part 4

Sealing on three sides in accordance with Seal Clas s 3 For dowelling onto structures with flat surfa ces in accordance with DIN 18202 Tab.3

Weir plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. CAUTION = If used for wall openings, we must inform you that the side cheeks protrude past the wall thickness and must therefore be stiffened. Optional = For weirs often subject to frost, we recommend the installation of a a cheek and/or weir heater, which switches on off automatically above + 2 °C. Optional = If motor drives are used, or weir is above 1 m high, automatic spindle nut grease lubrication should be used.




110

900

WSP min

WSP max

Hei

ght

Con

duit

dept

h

Clear width

Drive e.g. handwheel

Stainless steel spindle

Spindle protection

Spindle nut RG7

Flat seal

tube as required

Dust and splashproof rollingaxial bearing, stainless

Special profileseal


ABS NON-RETURN BARRIER Type: RF

Standard version: GG25 housing with EKB coating, flap panel vulcanised all round with EPDM

Type + DN Perm. pressure EBL H TK / No. x thread

in mm in operation in mm in mm in mm

RF 040 10 bar 180 95 ∅110 / 4 x M14

RF 050 10 bar 200 105 ∅125 / 4 x M16

RF 065 10 bar 240 122 ∅145 / 4 x M16

RF 080 10 bar 260 140 ∅160 / 8 x M16

RF 100 10 bar 300 152 ∅180 / 8 x M16

RF 125 10 bar 350 162 ∅210 / 8 x M16

RF 150 10 bar 400 180 ∅240 / 8 x M20

RF 200 10 bar 500 205 ∅295 / 8 x M20

RF 250 10 bar 600 255 ∅350 / 12 x M20

RF 300 10 bar 700 293 ∅400 / 12 x M20



Flap

Connection flange: to EN 1092 PN 10

H

EBL

Ventilation device

DN

Casing



ABS INTERMEDIATE FLANGE SLIDE GATE Type: ZS

Sealing on both sides, for insertion between flanges.

Standard version: GG25 housing with EKB coating, sl ider 1.4301, spindle 1.4104

Type + DN Perm. pressure EBL L H D TK / No. x thread Spindle Torque in mm in operation in mm in mm in mm in mm in mm size in Nm

ZS 0050 10 bar 40 289 120 126 ∅ 125 / 4 x M16 Tr 20 x 4 10 ZS 0065 10 bar 40 316 120 140 ∅ 145 / 4 x M16 Tr 20 x 4 11 ZS 0080 10 bar 50 342 120 184 ∅ 160 / 8 x M16 Tr 20 x 4 12 ZS 0100 10 bar 50 382 120 210 ∅ 180 / 8 x M16 Tr 20 x 4 13 ZS 0125 10 bar 50 416 169 240 ∅ 210 / 8 x M16 Tr 20 x 4 14 ZS 0150 10 bar 60 458 179 260 ∅ 240 / 8 x M20 Tr 20 x 4 15 ZS 0200 10 bar 60 575 240 320 ∅ 295 / 8 x M20 Tr 24 x 5 18 ZS 0250 10 bar 70 676 340 396 ∅ 350 / 12 x M20 Tr 24 x 5 31 ZS 0300 6 bar 70 778 340 468 ∅ 400 / 12 x M20 Tr 28 x 5 40 ZS 0350 6 bar 96 906 430 512 ∅ 460 / 16 x M20 Tr 28 x 5 62 ZS 0400 6 bar 100 1012 430 584 ∅ 515 / 16 x M24 Tr 30 x 6 70 ZS 0450 5 bar 106 1096 530 616 ∅ 565 / 20 x M24 Tr 35 x 6 105 ZS 0500 4 bar 110 1210 530 680 ∅ 620 / 20 x M24 Tr 40 x 7 125 ZS 0600 4 bar 110 1418 630 800 ∅ 725 / 20 x M27 Tr 40 x 7 168 ZS 0700 3 bar 110 1605 730 910 ∅ 840 / 24 x M27 Tr 50 x 8 225 ZS 0800 3 bar 110 1745 850 1020 ∅ 950 / 24 x M30 Tr 50 x 8 370 ZS 0900 3 bar 110 1980 1090 1115 ∅1050 / 28 x M30 Tr 50 x 8 450 ZS 1000 3 bar 110 2190 1190 1220 ∅1160 / 28 x M33 Tr 60 x 9 580 ZS 1200 3 bar 150 2735 1390 1494 ∅1380 / 32 x M36 Tr 60 x 9 750



Spindle protection in case of rising spindle

Bearing retainer

Rising / non-rising

Spindle

Adjustable PTFE seal

incl. flange seal

Connection drillhole template to EN 1092 PN10

L

DN EBL

H

D



01.2005

ABS Fitted removal piece Type: P3F

Half number of threaded rods also possible!

Standard version: Ho using in steel or stainless steel, seal in NBR or E PDM, Threaded anchors and nuts in stainless steel

DN

mm

max. pressure

bar

S EBL

mm

X +/-

mm

TK / No. x thread x L

mm

Weight

kg thick mm

red. mm

0040 PN 16 14 10 180 25 ∅110 / 4 x M14 x 280 9,5 0050 PN 16 18 10 180 25 ∅125 / 4 x M16 x 280 11 0065 PN 16 18 15 180 25 ∅145 / 4 x M16 x 280 13 0080 PN 16 20 15 200 25 ∅160 / 8 x M16 x 310 17 0100 PN 16 20 15 200 25 ∅180 / 8 x M16 x 310 21 0125 PN 16 22 15 200 25 ∅210 / 8 x M16 x 310 26 0150 PN 16 22 15 200 25 ∅240 / 8 x M20 x 320 35 0200 PN 10 26 15 220 25 ∅295 / 8 x M20 x 340 49 0250 PN 10 26 15 220 25 ∅350 / 12 x M20 x 360 65 0300 PN 10 26 18 220 25 ∅400 / 12 x M20 x 360 73 0350 PN 10 26 18 230 25 ∅460 / 16 x M20 x 360 97 0400 PN 10 26 18 230 25 ∅515 / 16 x M24 x 370 125 0450 PN 10 26 18 250 25 ∅565 / 20 x M24 x 390 140 0500 PN 10 28 18 260 25 ∅620 / 20 x M24 x 390 162 0550 PN 10 28 20 260 25 ∅675 / 20 x M27 x 410 195 0600 PN 10 28 23 260 25 ∅725 / 20 x M27 x 410 205 0650 PN 10 30 23 260 25 ∅780 / 24 x M27 x 410 237 0700 PN 10 30 23 260 25 ∅840 / 24 x M27 x 410 260 0800 PN 10 32 23 290 25 ∅950 / 24 x M30 x 460 355 0900 PN 10 34 28 290 25 ∅1050 / 28 x M30 x 460 408 1000 PN 10 34 28 290 25 ∅1160 / 28 x M33 x 480 450 1100 PN 10 38 28 300 25 ∅1270 / 32 x M33 x 480 585 1200 PN 10 38 28 320 25 ∅1380 / 32 x M36 x 520 750 1300 PN 10 42 340 25 ∅1490 / 32 x M39 x 530 912 1400 PN 10 42 360 25 ∅1590 / 36 x M39 x 560 1035 1500 PN 10 46 380 25 ∅1700 / 36 x M39 x 590 1162 1600 PN 10 46 390 25 ∅1820 / 40 x M45 x600 1520 1800 PN 10 50 400 25 ∅2020 / 44 x M45 x630 1830 2000 PN 10 54 410 25 ∅2230 / 48 x M45 x640 2280 2200 PN 10 58 430 25 ∅2440 / 52 x M52 x700 2790 2400 PN 10 62 440 25 ∅2650 / 56 x M52 x710 3510



XX

S

EBL

TK



01.2005

ABS Fitted removal piece Type: P4F

Half number of threaded rods also possible!

Standard version: Ho using in steel or stainless steel, seal in NBR or E PDM, Threaded anchors and nuts in stainless steel

DN

mm

max. pressure

bar

S EBL

mm

X +/-

mm

TK / No. x thread x L

mm

Weight

kg thick mm

red. mm

0040 PN 16 14 10 300 25 ∅110 / 4 x M14 x 250 12,5 0050 PN 16 18 10 300 25 ∅125 / 4 x M16 x 250 15 0065 PN 16 18 15 300 25 ∅145 / 4 x M16 x 250 18 0080 PN 16 20 15 300 25 ∅160 / 8 x M16 x 250 22,5 0100 PN 16 20 15 300 25 ∅180 / 8 x M16 x 250 28 0125 PN 16 22 15 300 25 ∅210 / 8 x M16 x 250 34 0150 PN 16 22 15 350 25 ∅240 / 8 x M20 x 290 48 0200 PN 10 26 15 350 25 ∅295 / 8 x M20 x 290 64 0250 PN 10 26 15 350 25 ∅350 / 12 x M20 x 290 88 0300 PN 10 26 18 350 25 ∅400 / 12 x M20 x 290 103 0350 PN 10 26 18 350 25 ∅460 / 16 x M20 x 290 125 0400 PN 10 26 18 375 25 ∅515 / 16 x M24 x 320 160 0450 PN 10 26 18 375 25 ∅565 / 20 x M24 x 320 176 0500 PN 10 28 18 375 25 ∅620 / 20 x M24 x 320 198 0550 PN 10 28 20 400 25 ∅675 / 20 x M27 x 340 248 0600 PN 10 28 23 400 25 ∅725 / 20 x M27 x 340 268 0650 PN 10 30 23 400 25 ∅780 / 24 x M27 x 340 292 0700 PN 10 30 23 400 25 ∅840 / 24 x M27 x 340 335 0800 PN 10 32 23 450 25 ∅950 / 24 x M30 x 380 455 0900 PN 10 34 28 450 25 ∅1050 / 28 x M30 x 380 522 1000 PN 10 34 28 475 25 ∅1160 / 28 x M33 x 420 635 1100 PN 10 38 28 475 25 ∅1270 / 32 x M33 x 420 744 1200 PN 10 38 28 525 25 ∅1380 / 32 x M36 x 450 984 1300 PN 10 42 550 25 ∅1490 / 32 x M39 x 450 1185 1400 PN 10 42 550 25 ∅1590 / 36 x M39 x 470 1256 1500 PN 10 46 550 25 ∅1700 / 36 x M39 x 470 1472 1600 PN 10 46 600 25 ∅1820 / 40 x M45 x 490 1895 1800 PN 10 50 650 25 ∅2020 / 44 x M45 x 530 2305 2000 PN 10 54 700 25 ∅2230 / 48 x M45 x 560 2800 2200 PN 10 58 700 25 ∅2440 / 52 x M52 x 600 3488 2400 PN 10 62 700 25 ∅2650 / 56 x M52 x 600 4080




XX

S

TK

EBL


ABS SLOT PLATE Type: SS

Versions: • with smooth sealing surface on both sides (steel, V2A, V4A) • with smooth sealing surface and rubberised sealing surface (NBR) • with rubberised sealing surface on both sides (NBR)

PN 6 PN 10 PN 16 DN b L ∅ s Weight ∅ s Weight ∅ s Weight

0010 20

110

0030 4 0045 4 045 4 0015 25 0040 4 0045 4 045 4 0020

30

0050 4 0058 4 058 4 0026 0060 4 0068 4 068 4 0032 0070 4 0078 4 078 4 0040 0080 4 0088 4 088 4 0050 0090 4 0102 4 102 4 0065 0110 4 0122 5 122 5 0080

40

0130 4 0138 5 138 5 0100

170

0150 5 0160 6 160 6 0125 0180 5 0188 8 188 8 0150 0205 8 0212 8 212 10 0200 0260 8 0268 8 288 12 0250 0315 10 0320 10 320 14 0300 0365 10 0375 12 375 16 0350

50

0416 12 0435 14 435 18 0400 0465 14 0482 16 490 20 0500 0570 16 0585 20 610 25 0600

240

0670 20 0685 24 725 30 0700 0775 22 0800 28 785 34 0800 0880 24 0905 32 900 38 1000

80 1080 30 1110 34

1200 1295 38 1330 45



Ø

L

b

b /2

b/2

s d ick



L1

S

DN

Ød

1

ØD

ØD

Ød

1

DN

S

L2

L4

S

DN

Ød

1

ØD

ØD

Ød

1

DN

S

L3

150

Ød

H

TK

/ N

o.

x th

rea

d

TK

/ N

o.

x th

rea

d

TK

/ N

o.

x th

rea

d

TK

/ N

o.

x th

rea

d

W all deck

ABS PIPES AND MOULDED PIECES For flanging on or grouting in, flanges to EN 1092 PN10



DN øD TK / No. x thread S

ød1 L1 L2 L3 L4 øD H thick red.

0050 165 Ø125 / 4 x M16 18 10 18 150 300 300 240 150 110 0065 185 Ø145 / 4 x M16 18 15 18 150 300 300 260 170 120 0080 200 Ø160 / 8 x M16 20 15 18 150 300 300 280 180 130 0100 220 Ø180 / 8 x M16 20 15 18 150 300 300 300 200 140 0125 250 Ø210 / 8 x M16 22 15 18 175 350 350 340 230 160 0150 285 Ø240 / 8 x M20 22 15 22 175 350 350 370 260 180 0175 315 Ø270 / 8 x M20 24 15 22 175 350 350 410 285 200 0200 340 Ø295 / 8 x M20 26 15 22 175 350 350 430 310 220 0250 395 Ø350 / 12 x M20 26 15 22 200 400 400 500 365 250 0300 445 Ø400 / 12 x M20 26 18 22 200 400 400 550 415 280 0350 505 Ø460 / 16 x M20 26 18 22 200 400 400 610 450 310 0400 565 Ø515 / 16 x M24 28 18 26 200 400 400 670 500 340 0450 615 Ø565 / 20 x M24 28 18 26 200 400 400 720 550 370 0500 670 Ø620 / 20 x M24 28 18 26 250 500 500 790 600 400 0600 780 Ø725 / 20 x M27 28 23 30 250 500 500 900 700 450 0700 895 Ø840 / 24 x M27 30 23 30 250 500 500 1020 800 510 0800 1015 Ø950 / 24 x M30 32 23 33 250 500 500 1140 900 570 0900 1115 Ø1050 / 28 x M30 34 28 33 250 500 500 1250 1010 630 1000 1230 Ø1160 / 28 x M33 34 28 36 252 500 500 1360 1110 690

01.2005

FS F-piece FFS F-F-piece

MR Masonry pipe TS T-piece



ABS FFR - PIECES Type: FFR

For flanging on, flange to EN 1092 PN10



DN1 øD TK / No. x thread S

ød1 L1 thick red.

0050 165 Ø125 / 4 x M16 18 10 18 100 0065 185 Ø145 / 4 x M16 18 15 18 100 0080 200 Ø160 / 8 x M16 20 15 18 105 0100 220 Ø180 / 8 x M16 20 15 18 115 0125 250 Ø210 / 8 x M16 22 15 18 140 0150 285 Ø240 / 8 x M20 22 15 22 155 0175 315 Ø270 / 8 x M20 24 15 22 160 0200 340 Ø295 / 8 x M20 26 15 22 165 0250 395 Ø350 / 12 x M20 26 15 22 210 0300 445 Ø400 / 12 x M20 26 18 22 210 0350 505 Ø460 / 16 x M20 26 18 22 300 0400 565 Ø515 / 16 x M24 28 18 26 400 0450 615 Ø565 / 20 x M24 28 18 26 400 0500 670 Ø620 / 20 x M24 28 18 26 400 0600 780 Ø725 / 20 x M27 28 23 30 400 0700 895 Ø840 / 24 x M27 30 23 30 400 0800 1015 Ø950 / 24 x M30 32 23 33 400 0900 1115 Ø1050 / 28 x M30 34 28 33 500 1000 1230 Ø1160 / 28 x M33 34 28 36 500

01.2005

L1

S

DN

1

Ød

1

ØD

DN

2

TK

/ N

o.

x th

rea

d



ABS TT - PIECES Type: TTS





ød1 L1 thick red.

0050 165 Ø125 / 4 x M16 18 10 18 300 0065 185 Ø145 / 4 x M16 18 15 18 310 0080 200 Ø160 / 8 x M16 20 15 18 330 0100 220 Ø180 / 8 x M16 20 15 18 360 0125 250 Ø210 / 8 x M16 22 15 18 400 0150 285 Ø240 / 8 x M20 22 15 22 440 0175 315 Ø270 / 8 x M20 24 15 22 490 0200 340 Ø295 / 8 x M20 26 15 22 520 0250 395 Ø350 / 12 x M20 26 15 22 700 0300 445 Ø400 / 12 x M20 26 18 22 800 0350 505 Ø460 / 16 x M20 26 18 22 850 0400 565 Ø515 / 16 x M24 28 18 26 900 0450 615 Ø565 / 20 x M24 28 18 26 950 0500 670 Ø620 / 20 x M24 28 18 26 1000 0600 780 Ø725 / 20 x M27 28 23 30 1100 0700 895 Ø840 / 24 x M27 30 23 30 1200 0800 1015 Ø950 / 24 x M30 32 23 33 1300 0900 1115 Ø1050 / 28 x M30 34 28 33 1400 1000 1230 Ø1160 / 28 x M33 34 28 36 1500

01.2005

L1

S

DN

Ød

1

ØD

L1

TK

/ N

o.

x th

rea

d



L1

S

DN

Ød

1

ØD

90°

ØD

Ød

1

DN

S

L2

45°

e

e

fr

TK

/ N

o.

x th

rea

d

TK

/ N

o.

x th

rea

d

ABS Q - PIECES Type: QS _




DN øD TK. / No. x thread S

ød1 L1 L2 r e f thick red.

0050 165 Ø125 / 4 x M16 18 10 18 85 70 76 32 29 0065 185 Ø145 / 4 x M16 18 15 18 104 82 95 39 34 0080 200 Ø160 / 8 x M16 20 15 18 124 98 114 47 41 0100 220 Ø180 / 8 x M16 20 15 18 162 125 152 63 52 0125 250 Ø210 / 8 x M16 22 15 18 201 154 190 79 64 0150 285 Ø240 / 8 x M20 22 15 22 240 181 229 95 75 0175 315 Ø270 / 8 x M20 24 15 22 282 229 270 122 95 0200 340 Ø295 / 8 x M20 26 15 22 318 238 305 126 99 0250 395 Ø350 / 12 x M20 26 15 22 394 292 381 158 121 0300 445 Ø400 / 12 x M20 26 18 22 470 345 457 189 143 0350 505 Ø460 / 16 x M20 26 18 22 546 400 533 221 166 0400 565 Ø515 / 16 x M24 28 18 26 624 456 610 253 189 0450 615 Ø565 / 20 x M24 28 18 26 700 509 686 284 211 0500 670 Ø620 / 20 x M24 28 18 26 776 564 762 316 234 0600 780 Ø725 / 20 x M27 28 23 30 928 671 914 379 278 0700 895 Ø840 / 24 x M27 30 23 30 1082 781 1067 442 324 0800 1015 Ø950 / 24 x M30 32 23 33 1235 890 1219 505 369 0900 1115 Ø1050 / 28 x M30 34 28 33 1389 999 1372 568 414 1000 1230 Ø1160 / 28 x M33 34 28 36 1541 1107 1524 631 459

01.2005

90° elbows - Type: R

45° elbows - Type: H



ABS N - PIECES Type: NS





ød1 L1 c øD thick red.

0050 165 Ø125 / 4 x M16 18 10 18 85 100 150 0065 185 Ø145 / 4 x M16 18 15 18 104 105 165 0080 200 Ø160 / 8 x M16 20 15 18 124 110 180 0100 220 Ø180 / 8 x M16 20 15 18 162 125 200 0125 250 Ø210 / 8 x M16 22 15 18 201 140 225 0150 285 Ø240 / 8 x M20 22 15 22 240 160 250 0175 315 Ø270 / 8 x M20 24 15 22 282 175 275 0200 340 Ø295 / 8 x M20 26 15 22 318 190 300 0250 395 Ø350 / 12 x M20 26 15 22 394 225 350 0300 445 Ø400 / 12 x M20 26 18 22 470 255 400 0350 505 Ø460 / 16 x M20 26 18 22 546 290 450 0400 565 Ø515 / 16 x M24 28 18 26 624 320 500 0450 615 Ø565 / 20 x M24 28 18 26 700 355 550 0500 670 Ø620 / 20 x M24 28 18 26 776 385 600 0600 780 Ø725 / 20 x M27 28 23 30 928 450 700 0700 895 Ø840 / 24 x M27 30 23 30 1082 510 800 0800 1015 Ø950 / 24 x M30 32 23 33 1235 570 900 0900 1115 Ø1050 / 28 x M30 34 28 33 1389 620 1000 1000 1230 Ø1160 / 28 x M33 34 28 36 1541 680 1100

01.2005

L1

S

DN

Ød

1

ØD

90°

c

Ød

L1

TK

/ N

o.

x th

rea

d



International materials comparison

Material Germany American Unified Nurr Swedish Francaise British

Mat. No. DIN AISI UNS SS AFNOR BS 1.4005 X 12 CrS 13 416 S 41600 2380 Z 11 CF 13 416 S 21

1.4006 X 10 Cr 13 410 S 41000 2302 Z 10 C 13 410 S 21

1.4016 X 6 Cr 17 430 S 43000 2320 Z 8 C 17 430 S 15

1.4021 X 20 Cr 13 420 S 42000 2303 Z 20 C 13 420 S 37

1.4034 X 46 Cr 13 (2304) Z 40 C 14 (420 S 45)

1.4057 X 20 CrNi 17 2 431 S 43100 2321 Z15 CN 16.02 431 S 29

1.4104 X 12 CrMoS 17 430 F S 43020 2383 Z 13 CF 17 (441 S 28)

1.4112 X 90 CrMoV 18 440 B S 44003

1.4122 X 35 CrMo 17

1.4301 X 5 CrNi 18 10 304 S 30400 2332 Z 6 CN 18.08 304 S 15

1.4305 X 10 CrNiS 18 9 303 S 30300 2346 Z 8 CNF 18.09 303 S 31

1.4306 X 2 CrNi 19 11 304 L S 30403 2352 Z 2 CN 18.10 304 S 11

1.4310 X 12 CrNi 17 7 301 S 30100 2331 Z 12 CN 18.08 301 S 22

1.4401 X 5 CrNiMo 17 12 2 316 S 31600 2347 Z 7 CND 17.12.02 316 S 31

1.4404 X 2 CrNiMo 17 13 2 316 L S 31603 2348 Z 3 CND 18.12.02 316 S 11

1.4435 X 2 CrNiMo 18 14 3 316 L S 31603 2353 Z 3 CND 18.14.03 316 S 11

1.4436 X 5 CrNiMo 17 13 3 316 S 31600 2343 Z 7 CND 18.12.03 316 S 31

1.4438 X 2 CrNiMo 18 16 4 317 L S 31703 2367 Z 3 CND 19.15.04 317 S 12

1.4439 X 2 CrNiMoN 17 13 5 317 LNM

1.4448 X 5 CrNiMo 17 13 317 S 31700

1.4450 X 4 CrNiMoN 27 5 2 329 S 32900 2324 Z 5 CND 27.05 AZ

1.4462 X 2 CrNiMoN 22 5 3 S 31803 2377 (Z 5 CNDU 21.08)

1.4539 X 1NiCrMoCuN 25 20 5 N 08904 2562 Z 1 NCDU 25.20

1.4541 X 6 CrNiTi 18 10 321 S 32100 2337 Z 6 CNT 18.10 321 S 31

1.4550 X 6 CrNiNb 18 10 347 S 34700 2338 Z 6 CNNb 18.10 347 S 31

1.4571 X 6 CrNiMoTi 17 12 2 316 Ti S 31635 2350 Z 6 CNDT 17.12 320 S 31

1.4713 X 10 CrAl 7 Z 8 CA 7

1.4724 X 10 CrAl 13 (Z 10 C 13)

1.4742 X 10 CrAl 18 Z 10 CAS 18

1.4762 X 10 CrAl 24 (446) (S 44600) (2322) Z 10 CAS 24

1.4821 X 20 CrNiSi 25 4 Z 20 CNS 25.04

1.4828 X 15 CrNiSi 20 12 309 (S 30900) Z 15 CNS 20.12 309 S 24

1.4841 X 15 CrNiSi 25 20 314 S 31400 Z 12 CNS 25.20 314 S 25

1.4845 X 12 CrNi 25 21 310 S S 31008 2361 Z 12 CN 25.20 310 S 24

1.4864 X 12 NiCrSi 36 16 330 N 08330 Z 12 CNS 35.16 (3076 NA 17)

1.4876 X 10 NiCrAlTi 32 20 B 163 Z 8 NC 32.21 3076 NA 15 H

1.4878 X 12 CrNiTi 18 9 321 S 32100 2337 Z 6 CNT 18.12 321 S 51

2.4068 LC NI 88 B 160

2.4360 Ni Cu 30 Fe B 164 3076 NA 13

2.4375 Ni Cu 30 Al 3076 NA 18

2.4610 Ni Mo 16 Cr 16 Ti 3076 NA 45

2.4816 Ni Cr 15 Fe B 166 3076 NA 14

2.4856 Ni Cr 21 Mo 3076 NA 43




GENERAL TERMS OF DELIVERY AND PAYMENT 1. Validity of conditions 1.1 . Deliveries, services and quotations made by the seller take place exclusively on

the basis of these general terms and conditions. These therefore also apply to all future business contacts, even if they are not explicitly agreed again. These conditions are assumed to be accepted with acceptance of the goods or services at the latest. Counter-confirmations of the purchaser with reference to his general or sales terms and conditions are herewith opposed.

1.2 . Variations to these business contacts are only then applicable if the seller confirms them in writing.

2 . Quotations and conclusion of contract 2.1 . The seller's quotations are subject to change without notice and are therefore

non-binding. The seller reserves the right to make intermediate sales. Declarations of acceptance and all orders are required to be in writing (per fax if necessary) to be legally valid. The same applies to alterations, supplements and subsidiary agreements.

2.2 . Drawings, images, dimensions, weights and other performance data are only binding if these have been explicitly and specifically agreed in writing.

2.3 . The seller's sales employees are not authorised to make verbal subsidiary agreements or verbal assurances which exceed the contents of the written contract.

3 . Prices 3.1 . Unless otherwise stated, the seller will remain bound to the prices contained in his

quotation up to 30 days from its date of issue. The prices stated in the seller's confirmation of order are decisive in addition to the legally required value-added tax at the currently valid rate. Additional deliveries and services will be invoiced separately.

3.2 . Prices are ex-works exclusive of packaging, freight, insurance and the statutory value-added tax at the rate valid at the time of delivery.

3.3 . If the delivery takes place more than 6 months after conclusion of contract, the seller is entitled to pass on any material price and wage increases which have occurred to the purchaser.

4 . Period of delivery and performance 4.1 . Delivery deadlines or time limits which are binding or non-binding

must be made in writing. The delivery deadline only begins after receipt of all performances, information and technical information to be handed over by the purchaser. If subsequent revisions are made to the contract, the delivery deadlines will be extended reasonably in so far as the seller has not confirmed the original delivery deadline.

4.2 . Delivery and performance delays due to acts of God and due to events which considerably hinder the seller in making the delivery or make it impossible - this especially includes strikes, lockouts, official orders etc, even if these occur to the seller's suppliers or their subcontractors - are not the responsibility of the seller even in the case of bindingly agreed time limits and deadlines. They entitle the seller to extend the delivery or service by the period of delay in addition to a reasonable start-up period, or to completely or partly withdraw from the contract due to the parts not yet completed.

4.3 . If the delay takes longer than 3 months, the seller is entitled to withdraw from the contract with regard to the parts not yet completed after a reasonable period of notice. If the delivery time is extended, or if the seller is freed from his obligations, the purchaser is not entitled to base any claims for damages upon this. The seller may only use the circumstances stated above as a base for claims if he informs the seller of this fact immediately.

4.4 . Insofar as the seller is responsible for non-observance of bindingly agreed time limits and deadlines, or is delayed, the purchaser is entitled to compensation for delay to the sum of ½ % for each complete week of delay, but, however, to a total of maximum 5% of the invoiced sum for the services and deliveries affected by the delay. Any claims over and above this amount are excluded, unless the delay is due at least to gross negligence or intent on the part of the seller.

4.5 . The seller is entitled to provide partial services and partial deliveries at any time. 5 . Passage of risk The risk transfers to the purchaser as soon as the delivery is transferred to the

person carrying out transport, and has left the seller's warehouse for the purpose of shipment. If shipment becomes impossible through no fault of the seller, the risk transfers to the purchaser as soon as he is informed of readiness for shipment.

6 . Warranty 6.1 . The seller guarantees that the product is free of fabrication and material faults;

the warranty period is 12 months. 6.2 . The period of warranty commences with the date of delivery. If operation or

maintenance instructions provided by the seller are not followed, alterations are carried out to products, parts are replaced or expendables are used which do not comply with the original specification, the warranty becomes invalid.

6.3 . The purchaser must inform the seller's customer service department of any fault immediately, or at the latest within one week of receipt of delivery item, in writing. Any faults which have not been discovered despite careful investigations within this time limit must be notified in writing to the seller immediately after discovery.

6.4 . If the purchaser informs the seller that the products do not comply with the warranty, the following regulations apply. The purchaser is first exclusively entitled to claim for rectification. If rectification is not effective, the purchaser is then entitled to reduction of remuneration or to demand cancellation of the contract.

6.5 . Any liability for normal wear and tear is excluded. 6.6 . Warranty claims against the seller can only be made by the immediate purchaser

and cannot be passed on. 6.7 . The above paragraphs finally contain the warranty for products and deliveries and

services, and exclude any other warranty claims of any type unless such claims are based on intent or gross negligence on the part of the seller.

7 . Retention of ownership 7.1 . The seller is guaranteed the following securities up to fulfilment of all

requirements (including all account balances from current accounts) which the seller is entitled to for any legal reason against the purchaser at present or in the future. The purchaser is entitled to release of the securities listed below so far as their realisable value exceeds the demands by more than 20%.

7.2 . The goods remain the property of the seller. Processing or reconstruction always take place for the seller as manufacturer, without, however, obligations for him. If the seller's (joint) ownership ceases due to liaison, it is agreed at this point that (joint) ownership of the purchaser is transferred to the purchaser proportionally to value (invoiced value). The purchaser keeps the (joint) ownership of the seller free of charge. Goods on which the seller has claimed for (joint) ownership are hereafter referred to as conditional commodities.

7.3. The purchaser is entitled to process conditional commodities in normal business activities and to dispose of them as long as he is not then in delay. Pledging or security transfers are not permissible. The purchaser accepts the assignment. The seller authorises him on a revocable basis to collect the claims assigned to the seller on his account and in his own name. The authorisation to collect may only be revoked if the purchaser does not fulfil his payment obligations correctly.

7.4 . In the case of access to the conditional commodities by third parties, the purchaser shall indicate the property of the seller and inform him immediately. Costs of intervention are to be charged to the purchaser.

7.5 . In the case of breach of contract by the purchaser – in particular delay in payment – the seller is entitled to take back the conditional commodities or, if appropriate,

to demand the assignment of the purchaser's claims for return against third parties. The taking back as well as the seizure of the conditional commodities by the seller do not constitute a rescinding of the contract – providing the Hire Purchase Act is not applied here.

8. Payment 8.1 . Providing no other arrangements have been made, the seller's invoices are to be

settled in German Marks or Euros within 30 days following date of invoice without any deductions.

The seller is entitled, despite any conditions of the purchaser to the contrary, to set off any payments against older debts of the purchaser first of all and is to inform the purchaser about the type of set-offs undertaken. If costs and interest have already been incurred, then the seller is entitled to set off the payment against the costs first of all, then against interest and finally against the principal performance.

8.2 . A payment is not considered as having been made until the seller has the amount at his disposal. In the case of cheques, the payment shall not be considered as having been made until the cheque has been honoured without any reservations.

8.3 . If the purchaser should get into default, the seller is entitled to charge interest, calculated as from the time of getting into default, to the amount of the interest rate charged by commercial banks for open current account credits. They may be assessed at a lower rate if the purchaser proves a lower debit.

8.4 . If the seller becomes aware of circumstances which cast doubt upon the credit worthiness of the purchaser, in particular if cheques are not honoured or the purchaser ceases with his payments, the seller is entitled to accelerate maturity on the entire remaining debt, even if he has accepted cheques. Furthermore in this case, the seller is also entitled to ask for advance payments or provision of security.

8.5 . The purchaser is only entitled to offset, retention or reduction of the purchase price, even if complaints about defects or counter-claims have been enforced, if the counter-claims have become res judicata or are incontestable.

9 . Drawings and alterations to constructions The seller reserves all property rights and copyrights with regard to drawings, sketches

and other operational documents. These documents may only be copied, used or made available to third parties following the written agreement of the seller. The documents are to be returned on request. The seller assures that documents passed on by him are not encumbered with commercial protective rights of third parties and in so far releases the seller from possible demands from third parties.

The seller reserves the right to make alterations to constructions at any time, he is, however, not obliged to carry out such alterations on products which have already been supplied.

10 . Erection and assembly The erection and putting into operation of machines and appliances only takes place in

accordance with a special order. The afore-going as well as the following terms and conditions shall apply with regard to every kind of assembly, putting into operation or customer service work by the seller, providing no divergent written agreements have been made in the individual case in question.

10.1 . The purchaser is to take over and make available in good time: - Breakdown gangs, such as skilled workmen and assistants with the necessary tools in the numbers required - The necessary objects and materials, as well as scaffolding, cranes and elevators, ladders, welding appliances and all other necessary equipment required for assembly and putting into operation - Operational power in the required form including the necessary connections to the point of use, heating and general lighting - sufficiently large, suitable, dry and lockable rooms at the assembly site to keep the machine parts, equipment, material, tools etc. as well as reasonable working and heated recreation rooms for the assembly personnel, including reasonable sanitary facilities in accordance with the given circumstances - Protective clothing and protective equipment which are necessary for the assembly site as a consequence of special circumstances and are not usual for the purchaser in his branch of trade.

10.2 . If the erection, assembly or putting into operation is delayed by circumstances on the building site, without this being attributable to a fault of the seller, the purchaser then has to bear all costs for waiting time and necessary travel undertaken by the assembly personnel.

10.3 . The purchaser is obliged to accept the assembly as soon as it is complete and the work has been terminated. The acceptance procedure involves a check of the system. If the acceptance procedure is delayed without any fault being attributable to the purchaser's side, then acceptance shall be considered as having been made following completion and termination of the work. Following acceptance of the assembly work, the property risk is transferred to the purchaser.

10.4 . The seller is only liable for the correct handling and erection or assembly of the delivered object; no liability is taken over for the purchaser's auxiliary personnel in connection with the erection or assembly.

11 . Restriction of liability Claims for damages ensuing from impossibility of performance, positive violation of a

claim, culpa in contrahendo and tort are excluded against the seller as well as against his vicarious agents, unless there is a case of intent or gross negligence

12 . Compensation on account of non-fulfilment of the contract If the purchaser does not fulfil his obligations concerning acceptance of the delivery

and service of the seller or if he withdraws from the contract without due justification or gives unjust notice of termination, then the seller can claim compensation, incl. lost profit, from the purchaser.

The amount of the compensation is calculated as being 25 % of the order value of the of the delivery and services ordered by the purchaser. The amount of this abstractly calculated compensation is increased or decreased if the seller can prove damages to a higher extent or the purchaser to a lower extent.

13 . Applicable law, Place of jurisdiction, Partial invalidity 13.1 . The law of the Federal Republic of Germany shall apply with regard to these terms and

conditions of business as well as the entire legal relationship between the seller and purchaser.

13.2 . Providing the purchaser is a businessman within the meaning of the German Commercial Code, the exclusive place of jurisdiction for all disputes arising directly or indirectly from the contractual relationship shall be the jurisdiction of the Magistrates' Court / County Court Bad Oeynhausen/Bielefeld.

13.3 . If a provision in these terms and conditions of business or a provision within the scope of other agreements should be or become invalid, then the validity of all other provisions and agreements shall not be affected as a result. An invalid clause is to be replaced by a valid clause which corresponds to the implied intention and the economic meaning and purpose of the contract.

Catalogue ABS-Armaturen

Documents

stepped bed

handpull slide gate

threaded slide gate

plug sluice round bed

waste water fittings

plug sluice straight

standard fittings

fittings standard din