Catálogo mampara w40 tecno

www.tecnospa.com  

W40 Partition Designed by Centro Progetti Tecno, Daniele Del Missier. 2015

W40 Partition Designed by Centro Progetti Tecno, Daniele Del Missier. 2015

www.tecnospa.com  

W40. Contents

The Product Profiles Partitions Joints Doors Technical Analysis Profiles Partitions Joints Doors Sustainability and Certifications

2

www.tecnospa.com  

W40. Innovation in the finest tradition of Tecno

Unwavering attention to the ever-changing office and contract environments, plus a natural propensity for advanced technical solutions have always distinguished the Tecno brand. After W80, Tecno now presents the single glazed partition W40, an outstanding system thanks to specific and truly unique aesthetic and technical choices, with a level of performance that places W40 at the very top of its category internationally. The result is a partition wall system that is thoroughly innovative, so much so it guarantees clients and designers the utmost freedom and design creativity in the definition of spaces.

The Product

System Analysis Profiles / Partitions /Joints / Doors Technical  Analysis Applica3on Sustainability  and  cer3fica3ons

3

www.tecnospa.com  

W40 is a mobile partition wall with a total thickness of 50 mm available in the following versions: Single glazed panel flush to exterior (offset) Single glazed central panel The distinguishing trait of W40, which avails of and develops several characteristic traits of W80, lies in the possibility of creating a vibrant surface with unique material, chromatic and three-dimensional effects. In addition, the sliding door slides inside the profile of the partition. These innovative solutions go hand-in-hand with the following characteristics - Highly refined aesthetic design •  A hi-tech core that has led to the filing of 4 industrial patents;

•  Extreme ease of assembly and disassembly for subsequent reconfigurations;

•  Superb structural and acoustic performance.

W40. Key characteristics The Product

4

www.tecnospa.com  

The W40 partition wall system consists of extruded aluminium profiles with a telescopic insert and adjustment systememploying an aluminium foot which makes it possible to compensate with ease forany differences in the floor or ceiling level. The glazed panels have an aluminium profile fixed to the top and bottom with double-sided structural adhesive. The specially shaped profile makes it possible for the panel to be attached with a Snap-on system comprising two separate co-extrudedi plastic parts.

W40. Technical and functional characteristics The  Product

5

www.tecnospa.com  

Floor profiles are available in two heights (H 35 mm and h. 20 mm), as for the W80 partition. The h. 35 mm profile makes it possible to adjust the partition wall by 25 mm (+/- 12.5 mm) and is suitable for floors with considerable unevenness, while the H. 20 mm profile makes it possible to adjust the partition wall by10 mm (+/-5 mm.), making it suitable for floors with slight unevenness. Profile for offset and central panels The partition can accommodate offset panels on the right, left or centre, with a combination of the latter also possible, creating uniquely vibrant and three-dimensional effects across the glazed surface. The recessed profile The profile, both for central and offset panels, can also be recessed in the floor. This profile guarantees an optimal aesthetic impact and is recommended above all for carpeted floors

PROFILE FOR LEFT OFFSET PANEL

W40. Floor profiles

PROFILE FOR CENTRAL PANEL

The Product Profiles / Partitions / Joints / Doors

PROFILE FOR RIGHT OFFSET PANEL RECESSED FLOOR PROFILE

6

www.tecnospa.com  

Upper profile H 35 mm. This profile, available in both central and offset versions, makes it possible to adjust the partition height by +/- 12.5 mm and allows the sliding door to slide inside, in addition to offering the possibility of housing venetian or roller blinds, or screens, also within the profile. For large sites, in addition to the standard channel, there is also the possibility of a special telescopic channel – deflection head - which responds to the deflection requirements typically associated with some buildings (also deflections of +/- 50 mm for a total difference in height of 100 mm). The recessed profile The profile, both for central and offset panels, can also be recessed in the ceiling thanks to the special system for attaching the glass panels. Installation The ceiling or false ceiling must be structurally suitable for supporting the partition wall system. Suitable ceilings are: cement slab, plasterboard false ceiling, other suspended false ceilings with vertical connections, metal false ceilings with a rigid bandraster, plasterboard partitions with internal wood or metal stiffeners.

CENTRAL PROFILE

W40. Ceiling profiles The Product Profiles / Partitions / Joints / Doors

OFFSET PROFILE (rx or lx) PROFILE FOR RIGHT OFFSET PANEL

7

www.tecnospa.com  

CENTRAL PARTITION OFFSET AND CENTRAL PARTITION COMBINED

Stratified glass 5+0.38+5 Standard height up to 3000 mm Greater heights can be achieved either by increasing the thickness of the glass or by using glass top panels. The glass used is from the Blue Line. On request, extra-clear, etched or screenprinted glasses in various colours can also be used, with translucent coloured internal PVB.

W40. Glazed partition wall The Product Profiles / Partitions / Joints / Doors

OFFSET PARTITION WITH RX OR LX PANEL

PROFILE FOR RIGHT OFFSET PANEL

8

www.tecnospa.com  

Glass panels The panels are connected vertically by transparent polycarbonate profiles with in-line, 90° and T-shaped joints. The profiles feature a double-sided adhesive tape that guarantees perfect structural union and sound insulation.

W40. Joints The Product Profiles / Partitions / Joints / Doors

90° OFFSET CORNER 90° CENTRAL CORNER PROFILE FOR RIGHT OFFSET PANEL

9

www.tecnospa.com  

Glass panels The panels are connected vertically by transparent polycarbonate profiles with in-line, 90° and T-shaped joints. The profiles feature a double-sided adhesive tape that guarantees perfect structural union and sound insulation.

W40. Joints The Product Profiles / Partitions / Joints / Doors

T-SHAPED OFFSET JOINT T-SHAPED CENTRAL JOINT PROFILE FOR RIGHT OFFSET PANEL

10

www.tecnospa.com  

Integrating W40 and W80 The W40 partition can be fully integrated with the W80 partition system, enabling the use of single and double glazed and blank panels in seamless solutions that respond to a whole range of customer requirements. The system includes T-shaped joints, with both central and offset panels, W40/W80 double glazed panels and T-shaped joints for W40/W80 blank panels.

W40. Joints The Product Profiles / Partitions / Joints / Doors

T-SHAPED JOINT FOR W40/W80 GLASS PANEL T-SHAPED JOINT FOR W40/W80 BLANK PANEL PROFILE FOR RIGHT OFFSET PANEL

11

www.tecnospa.com  

Hinged Door Thickness 50 mm Tempered single glazed panel (10 mm) flush with the door exterior The doors have a total thickness of 50 mm flush with the wall and come with a sound insulation guillotine as standard The patented hinges, in die-cast zamak, are completely concealed and feature a micrometric adjustment system. The door frame is in extruded aluminium with a door striker seal that can also be used for sliding doors; the lever handle has a Euro profile cylinder lock. An upper concealed integrated door lock is available on request. The doors can also be fitted with American locks. The system also offers hinged doors with polished edge glass and solid doors.

W40. Glass hinged door The Product Profiles / Partitions / Joints / Doors

12

www.tecnospa.com  

Internal Sliding Tempered glass (10 mm) The door is produced with a perimetral frame in extruded aluminium, complete with sound insulation guillotine. The door element slides inside the upper and lower channel of the partition and, on request, is fitted with a damper system for soft opening and closing. The door frame is in extruded aluminium with a door striker seal that can also be used for hinged doors. "Hook" lock with Euro profile cylinder lock. American locks can also be used. Integrated handle. Patented "drop down" system for closing the lower sliding compartment.

W40. Sliding glass door The Product Profiles / Partitions / Joints / Doors

13

www.tecnospa.com  

W40. Vertical cross-section of glass partition Technical analysis Profiles / Partitions / Joints / Doors

14

www.tecnospa.com  

W40. Horizontal cross-section of glass partition Technical analysis Profiles / Partitions / Joints / Doors

15

www.tecnospa.com  

W40. Vertical cross-section of doors Technical analysis Profiles / Partitions / Joints / Doors

16

www.tecnospa.com  

W40. Horizontal cross-section of doors Technical analysis Profiles / Partitions / Joints / Doors

17

www.tecnospa.com  

W40. Joints Technical analysis Profiles/ Partitions / Joints / Doors

18

www.tecnospa.com  

W40. Partition Photo  Gallery

19

www.tecnospa.com  

Photo  Gallery W40. Partition

20

www.tecnospa.com  

W40. Environmental sustainability Sustainability  and  Cer6fica6ons

The W40 partition utilises materials which are totally eco-sustainable and recyclable: •  Aluminium

•  Glass

•  Wood materials used are certified FSC and/or PEFC •  Faced panels in colours MM0A and MM1F consist of panels certified as “100% recycled wood” The product is designed to be completely disassembled and separated into single-material components at the end of its life cycle, so that each component can be delivered to the dedicated recycling point. The packaging used is also recyclable or reusable after delivery. To ensure unwavering quality across products and the entire manufacturing system, Tecno Spa has had its Quality Management System certified to UNI EN ISO 9001 and its Environmental Management System certified to UNI EN ISO 14001.

[1] benches

RS SNCF Agence des Gares - Jean-Marie Duthilleul .98

Se la mobilità è un segno del terzo millennio, acquistano crescente importanza i beni, servizi e allestimenti collegati al fluire di passeggeri; tra questi i supporti per l’attesa. Tecno studia da tempo i temi di design per luoghi ad alta frequentazione, da questa ricerca nasce RS Railway System, la trasformazione in un prodotto di catalogo delle sedute realizzate da Tecno per le Ferrovie Francesi e firmate SNCF Agence des Gares - Jean-Marie Duthilleul.La ragione progettuale di RS è la segmentazione delle occasioni di utilizzo, la versatilità è dunque in testa ai motivi della sua rapidissima diffusione, e consiste nella capacità della struttura costruttiva di accogliere differenti scocche e/o accessori.Dal punto di vista tipologico, sono stati individuati tre livelli di postura: la panca modulare con schienale, la panchetta modulare senza schienale, ambedue con o senza braccioli, fissate a pavimento o con basamento mobile; e “la seduta in piedi” di tipo fisso modulare a posti individuali, atta a soddisfare le occasioni di brevi tempi di attesa.Dal punto di vista dei materiali e finiture, le scocche del sistema RS sono realizzate in alluminio color grigio metallizzato o personalizzato, alluminio e legno, legno, cuoio, consentendo per alcuni modelli anche l’utilizzo in esterni. Una scelta di accessori accresce la performance del sistema: braccioli di diversa sagoma, tavolini e/o piani d’appoggio in materiali diversi tra cui il cristallo colorato.

If mobility is a sign of the third millennium, then goods, services and infrastructures useful to passengers become essential. Public seating falls into this category. Tecno has been developing designs for high traffic areas for many years. The result of this research is the RS Railway System, a product listed in our catalogue of seating systems made by Tecno for the French Railways and endorsed by SNCF Agence des Gares - Jean-Marie Duthilleul.RS’s distinctive feature is its segmentation for different uses. Therefore, versatility is one of the main reasons for its popularity, and consists in the capacity of its structure to accommodate different type of seats and/or accessories. There are three basic configurations: the modular bench with a seat back, the modular bench without a seat back, both types with or without armrests, and with a floor-fixed base or a mobile base; and the modular perch - a type of fixed seating suited for short waits.The frames of the RS system are made in aluminium painted metallic grey or client’s colour specification, aluminium and wood, wood, leather. Some options are designed for outdoors use. A selection of accessories enhances the system’s performance: different shapes of armrests, tables and/or ledges in different materials, including painted glass.

PHOTO BY ALAIN DOVIFAT

BEPPE RASO

HANS PATTIST

PIETRO CARRIERI

STUDIO DE TULLIO

21