125
125
FORWARDFORWARDPiccoli ventilatori centrifughi pale avantiSmall size forward curved blade centrifugal fans
126
RD 0 RD 45 RD 90 RD 135 RD 180 RD 225 RD 270 RD 315
LG 0 LG 45 LG 90 LG 135 LG 180 LG 225 LG 270 LG 315
RD
LG
FORWARD OrientamentiDischarge angles
APPLICAZIONI I piccoli ventilatori centrifughi della serie FORWARD sono adatti peril convogliamento daria pulita e fumi non polverosi, fino allatemperatura massima di 80C.Trovano il loro impiego in tutte quelle applicazioni industriali dovesiano richiesti piccoli volumi daria con pressioni medio-alte ad esempiomacchine utensili , aspirazione o immissione incanalizzazioni, cappe aspiranti, ecc.
COSTRUZIONE Cassa in lamiera di acciaio verniciata. Girante a sempliceaspirazione, realizzata in lamiera zincata con pale curve inavanti (sirocco).Motore asincrono trifase o monofase , grado di protezioneIP 55, isolamento classe F, servizio S1, forma B35(FORWARD 122-142 forma B5), costruzione a normeIEC / EEC (UNEL MEC).Esecuzione 5; accoppiamento diretto con girante a sbalzo.
SPECIFICHE TECNICHE Aria convogliata: max 80C, min -20 C.
Tensione e frequenza dalimentazione:- monofase (M) 230V-50 Hz- trifase (T) 400V-50 Hz
Orientamento standard: LG 270.
A RICHIESTA Sedia di supporto (escluso 122-142): FF-FO.Versione alta temperatura: FORWARD-AT.Versione Atex: FORWARD-ATEX.Rete di protezione (accessorio) - Obbligatorio per lutilizzo abocca libera
APPLICATIONS Small size centrifugal fans of FORWARD line are designed to conveyclean air and dustless smokes, up to the maximumtemperature of 80C.They are used in all industrial applications where small airvolumes and medium-high pressure are required, for instancemachines tool, suction or intake in canalizations, hoods, etc.
CONSTRUCTION Volute in painted metal sheet. Forward curved blade singleinlet impeller, in galvanized steel sheet.Asynchronous three phase or single phase motor, IP 55,insulat ion class F, service S1, mounting type B35(FORWARD 122-142 mounting type B5 ) , according to IEC/EEC.Arrangement 5; direct coupled, discharge angle LG270.
TECHNICAL SPECIFICATIONS Conveyed air : max 80C, min - 20 C Voltage and frequency :- Mono-phase (M) 230V-50 Hz- Three-phase (T) 400V-50 Hz Standard discharge angle: LG 270.
ON REQUEST Fan support (excluded 122-142): FF-FO.High temperature version: FORWARD-AT.Explosion proof version: FORWARD-ATEX.Protection grid (accessory) mandatory for free air
Orientamento standard LG 270
Standard discharge angle LG 270
Tolleranza sulla rumorosit - Noise tolerance: 3dB/
Attenzione : il livello di pressione sonora riferito ad unamisurazione onnidirezionale in campo libero a 1.5 m dal ventilatoreal punto di massimo rendimento con aspirazione e mandatacanalizzata.Attention: sound pressure level in measured in free field at 1.5m fromthe fan, at maximum efficiency with ducted inlet and outlet.
FORWARD PrestazioniPerformances
Q (m3/h)
(m
m H
2O
)
50 100 150 200 250 300 350 400 450 500
45
40
35
30
25
20
15
10
5
0
Q (m3/h)
(
mm
H2O
)
100 200 300 400 500 600 700 800
60
50
40
30
20
10
0
pt
(m
m H
2O
) 70
60
50
40
30
20
10
0
200 400 600 800 1000 1200
Q (m3/h)
psps
pt
pt
ps
(m
m H
2O
) 90
80
70
60
50
40
30
20
10
0
200 400 600 800 1000 1200 1400
Q (m3/h)
pt
ps
(
mm
H2O
) 110
100
90
80
70
60
50
40
30
20
10
0400 800 1200 1600 2000
Q (m3/h)
pt
ps
FORWARD 122
127
FORWARD 142
FORWARD 152 FORWARD 162
FORWARD 182
1 mm H2O= 9,8 Pa
2 POLI/POLES (3000 rpm) - T: trifase/three-phase (3Ph-400V-50 Hz)
Modello Pm In max Mot LpModel (kW) (A) (H) dB(A)122 T 0,09 0.29 56 60142 T 0,18 0.65 63 68152 T 0,25 1.35 63 70162 T 0,55 1.9 71 71182 T 1,1 2.5 80 74
2 POLI/POLES (3000 rpm) - M: monofase/single-phase (1Ph-230V-50 Hz)
Modello Pm In max Mot LpModel (kW) (A) (H) dB(A)
122 M 0,09 0.8 56 60142 M 0,18 0.85 63 68152 M 0,25 3.6 63 70162 M 0,55 5.2 71 71182 M 1,1 7.9 80 74
Le prestazioni indicate nei diagrammi si riferiscono ad aria alla temperatura di 15C ed allaltitudine di O mt s.l.m. , e sono state ottenute in installazioni di tipo D in assenza di reti e accessori .Performance shown in the selection diagrams refer to air at 15C temperature and 0 mt a.s.l. altitude, and they were obtained in installation type D with no grid nor accessories.
SEDIA DI SUPPORTO / FAN SUPPORT FF-FO
128
FORWARD DimensioniDimensions
A1 B1 A2 B2 A3 B3 d D D1 D2 E F G1 G2 L M kg*
122 80 80 96 96 115 115 8,2 119 136 150 205 238 93 84 254 43 4,2142 90 90 112 112 130 130 8,2 129 155 170 219 252 109 92 271 48 5,6152 108 108 137 137 160 160 8,2 150 175 190 252 290 129 98 301 57 7,1162 108 108 137 137 160 160 8,2 150 175 190 252 290 129 98 329 57 9182 118 118 147 147 170 170 8,2 169 200 215 288 334 142 118 358 63 13,2
Dimensioni in mm/Dimensions in mm*Indicativo/Indicative
ModelloModel
Peso ventilatore in kg (completo di motore) Weight of fan in kg (complete with motor)
FORWARD AccessoriAccessories
Boccaglio con reteInlet with grid
ChiocciolaCasing
MotorMotor
GiranteImpeller
A B C D E F Mot (H)
152 100 200 140 230 145 208 63162 100 200 140 230 145 216 71182 100 200 140 230 145 225 80
Dimensioni in mm/Dimensions in mm
ModelloModel
Rete di protezione lato mandata(accessorio). Obbligatorio per lutilizzoa bocca liberaOutlet protection grid (accessory)mandatory for free air
OPG-FO
Ventilatore centrifugo pale avantiForward curved blade centrifugal fansAPPLICAZIONI I ventilatori della serie SIROCCO sono destinati alle installazioni cherichiedono portate daria elevate con pressioni relativamente basse,in istallazioni canalizzate. Ad esempio: ventilazione e condizionamentodi impianti civili e industriali, ristoranti , parcheggi, applicazioni navali,ecc.
GAMMA La gamma composta da 10 taglie con diametro della girante da 180a 450 mm.
PECULIARIT La gamma di ventilatori SIROCCO si caratterizza per lestremarobustezza dovuta alla costruzione in acciaio verniciato e agli spessoredei materiali utilizzati. Unaltra caratteristica la variet di modelli eversioni che costituiscono la gamma, che consentono di trovare lasoluzione pi idonea a qualsiasi problema di ventilazione.
COSTRUZIONE Coclea in lamiera di acciaio verniciato. Flangiatura a normeISO 6580/EUROVENT 1-2.Girante a semplice aspirazione a pale avanti saldata.Equilibratura a norme ISO 1940.
Motore elettrico asincrono trifase o monofase, grado diprotezione IP 55, isolamento classe F, servizio S1, formaB3 o B5, costruzione a norme IEC/EEC (UNEL MEC).
Esecuzioni 4 e 5 (girante direttamente accoppiata allalberomotore).
SPECIFICHE TECNICHE SIROCCO standard:
Aria convogliata: pulita, leggermente polverosa, non a b ra si va. Temperatura aria convogliata: -20C / +80C.Tensione di alimentazione:Versione trifase (T) 400V-50Hz.Versione monofase (M) 230V-50Hz.
ESECUZIONI SIROCCO esecuzione 4: girante direttamente accoppiata allalbero motore, motore posizionato su supporto (sedia).SIROCCO esecuzione 5: girante direttamente accoppiata allalbero motore, motore f langiato sul la voluta del vent i latore).
ACCESSORI Controflangia aspirante (ICF-SIR) e premente (OCF-SIR)Giunto antivibranti aspirante (IFC-SIR) e premente (OFC-SIR)Portello dispezione (ID-SIR)Supporti antivibranti (AM)Foro scarico condensa (CD)Rete di protezione aspirante (IPG-SIR) e premente (OPG-SIR)(Necessaria nellutilizzo a bocca libera).
A RICHIESTA Versione antiscintilla,antideflagrante Versione in acciaio inoxVersioni gas caldi (150C per accoppiamento diretto).
APPLICATIONS The fans of SIROCCO line are designed for installations requiringhigh air capacities with relatively low pressures, in ducting applications.For instance: ventilation and conditioning of civilian and industrialplants, restaurants, car parks, marine applications, etc.
RANGE This line consists of 10 sizes with impeller diameter from 180 up to450 mm.
ADVANTAGES SIROCCO line is characterized by the extreme sturdiness due to therigid construction in enamelled sheet metal and the thickness of thematerials. Another characteristic is the variety of models and versionscomposing the series, allowing to find the most suitable solution toany ventilation problem.
CONSTRUCTION Volute in epoxy painted enamelled steel sheet. Fixing flangesaccording to ISO 6580 / EUROVENT 1-2.Single inlet forward curved blade impeller, welded and balancedaccording to ISO 1940.Asynchronous three or single phase, electric motor, protectionIP 55, insulation class F, service S1, mountingtype B3 or B5, construction according to IEC / EEC (UNEL-MEC) standards.Arrangement 4 or 5 (impeller directly coupled to motor shaft);
TECHNICAL SPECIFICATIONS SIROCCO standard
Conveyed air: clean or sl ightly dusty, not abrasive.Temperature of conveyed air: -20C / +80C.Voltage:Three phase version (T) 400V-50Hz.Mono-phase version (M) 230V-50Hz.
ARRANGEMENTS SIROCCO arrangement 4: impeller directly coupled to motorshaft, motor placed on the motor support.SIROCCO arrangement 5: impeller directly coupled to motorshaft, motor flanged on the fan volute.
ACCESSORIES Inlet (ICF-SIR) and outlet (OCF-SIR) counter flangesInlet ( IFC-SIR) and outlet (OFC-SIR) f lexible jointsInspection door (ID-SIR)AV mounts (AM)Condensation drain hole (CD)Inlet (IPG-SIR) and outlet (OPG-SIR) protection grids(Necessary for use in free air).
ON REQUEST Spark proof, explosion proof versions. Stainless steel version High temperature versions (150C for direct coupling).
SIROCCOSIROCCO
SIROCCO OrientamentiDischarge angles
RD 0 RD 45 RD 90 RD 135 RD 180 RD 225 RD 270 RD 315
LG 0 LG 45 LG 90 LG 135 LG 180 LG 225 LG 270 LG 315
RD
LG
129
SIROCCO PrestazioniPerformances
Q (m3/h)
Rpm= Numero di giri nominali del motore/ Nominal motor speedPm= Potenza motore/Motor powerIn= Corrente assorbita/Absorbed currentLp= il livello di pressione sonora riferito ad una misurazione onnidirezionalein campo libero a 1.5 m dal ventilatore con aspirazione e mandata canalizzate.Sound pressure level in measured in free field at 1.5 m from the fan, in anydirection, with ducted inlet and outlet.Tolleranza sulla rumorosit - Noise tolerance: +3dB(A)Tolleranza sulla potenza - Absorbed power tolerance: +3%
454
354
404
314
254
224
284
180
160
140
120
100
80
60
40
20
0 2.000 4.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000Q (m3/h)
A
B
AB
A
B
A B
6 POLI/POLES (1000 rpm) T: trifase/three-phase (3Ph-400V-50 Hz)
Modello Portata Pm In max Mot LpModel Flow rate (kW) (A) (H) dB(A)
(m3/h)
316/A 3.850 0,55 1,75 80 62356/A 4.250 0,75 2,1 90 63356/B 5.400 1,1 2,9 90 65406/A 6.150 1,5 3,9 100 66406/B 8.500 2,2 4,8 112 69456/A 9.500 3 6,8 132 70456/B 12.000 4 8,6 132 71
282
222
252
275
250
225
200
175
150
125
100
75
500 1.000 2.000 3.000 4.000 5.000 6.000 7.000 8.000
A
B
A
B
AB
AB
A B
Pt / P
s (m
m H
2O
)P
t / P
s (m
m H
2O
)P
t / P
s (m
m H
2O
)
2 POLI/POLES (3000 rpm) - T: trifase/three-phase (3Ph-400V-50 Hz)
Modello Portata Pm In max Mot LpModel Flow rate (kW) (A) (H) dB(A)
(m3/h)
182/A 1.190 0,55 1,35 71 70182/B 1.900 1,1 2,5 80 72202/A 1.700 1,1 2,5 80 75202/B 3.050 2,2 4,7 90 76222/A 2.150 2,2 3,2 90 78222/B 3.850 3 6,1 100 79252/A 3.450 3 6,1 100 84252/B 5.400 4 10,4 112 85282/A 4.750 5,5 10,4 132 86282/B 7.650 9,2 18,8 132 87
Modello Portata Pm In max Mot LpModel Flow rate (kW) (A) (H) dB(A)
(m3/h)
224/A 1.900 0,37 1,1 71 60254/A 2.400 0,55 1,5 80 63284/A 3.050 0,75 1,9 80 68284/B 3.850 1,1 2,6 90 68314/A 4.250 1,5 3,5 90 71314/B 6.150 2,2 4,8 100 71354/A 6.150 3 6,6 100 74354/B 8.500 4 8,3 112 75404/A 9.500 5,5 11 132 78404/B 12.000 7,5 14,6 132 78454/A 12.000 9,2 18,9 132 79454/B 19.000 15 27,7 160 81
4 POLI/POLES (1500 rpm) T: trifase/three-phase (3Ph-400V-50 Hz)
202
182
A B
130
1 mm H2O= 9,8 Pa
Q (m3/h)
456
356
406
316
80
70
60
50
40
30
200 1.000 2.000 3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 13.000 14.000
A
B
A
B
Le prestazioni indicate nei diagrammi si riferiscono ad aria alla temperatura di 15C ed allaltitudine di O mt s.l.m. , e sono state ottenute in installazioni di tipo D in assenza di reti e accessori .Performance shown in the selection diagrams refer to air at 15C temperature and 0 mt a.s.l. altitude, and they were obtained in installation type D with no grid nor accessories.
SIROCCO DimensioniDimensions
ModelloModel
Flangia aspiranteInlet flange
Flangia prementeOutlet flange
d d1 d2 n a b a1 b1 a2 b2 n1xp n2xp n 180 185 219 250 8 8 185 130 219 165 255 201 - 1x112 6 12200 205 241 275 8 8 207 148 241 182 277 218 1x112 1x112 8 12220 228 265 298 8 8 231 166 265 200 301 236 1x112 1x112 8 12250 255 292 325 8 10 258 185 292 219 328 255 1x112 2x112 10 12280 285 332 365 8 10 288 205 332 249 368 285 1x125 2x125 10 12310 320 366 400 8 10 322 229 366 273 402 309 1x125 2x125 10 12350 360 405 440 8 10 361 256 405 300 441 336 1x125 2x125 10 12400 405 448 485 8 10 404 288 448 332 484 368 2x125 3x125 14 12450 455 497 535 8 10 453 322 497 366 533 402 2x125 3x125 14 12
Dimensioni in mm/Dimensions in mm
Esecuzione 4
Arrangement 4
Mot(H)
Ventilatore Fan (fig. 1) Basamento Base (fig. 2)Kg A B C D E F G I J K M Q R
Pm(kW)
ModelloModel 0
135 180225270315
H
182/A 71 0,55 18 67 345 325 145 391 108 - - - 236 - - - - - - -182/B 80 1,1 21 365202/A 80 1,1 30 77 413 368 165 440 120 76 265 165 265 121 203 225 211 45 45 10202/B 90 2,2 37 453 133 234 260 246 55 58 10222/A 90 2,2 36 471 133 234 260 246 55 58 10222/B 100 3 47 85 541 410 180 495 135 86 300 180 300 197 289 324 276 30 49 12224/A 71 0,37 30 411 121 203 225 189 45 23 10252/A 100 3 49 560 197 289 324 276 30 49 12252/B 112 4 66 94 560 441 195 526 149 96 315 195 315 197 289 324 276 30 49 12254/A 80 0,55 37 450 121 203 225 211 45 45 10282/A 132 5,5 72
105
647
477 200 610 172 105 375 200 375
237 337 372 336 40 59 12282/B 132 9,2 78 647 237 337 372 336 40 59 12284/A 80 0,75 44 475 121 203 225 211 45 45 10284/B 90 1,1 46 515 133 234 260 246 55 58 10314/A 90 1,5 60 539 133 234 260 246 55 58 10314/B 100 2,2 62 117 609 527 225 658 196 117 400 225 400 197 289 324 276 30 49 12316/B 80 0,55 53 499 121 203 225 211 45 45 10354/A 100 3 78
130
636
600 255 740 216 131 450 255 450
197 289 324 276 30 49 12354/B 112 4 87 636 197 289 324 276 30 49 12356/A 90 0,75 70 566 133 234 260 246 55 58 10356/B 90 1,1 72 566 133 234 260 246 55 58 10404/A 132 5,5 109
147
730
655 285 815 245 147 500 285 500
237 337 372 336 40 59 12404/B 132 7,5 119 730 237 337 372 336 40 59 12406/A 100 1,5 93 668 197 289 324 276 30 49 12406/B 112 2,2 99 668 197 289 324 276 30 49 12454/A 132 9,2 129
163
764
735 320 915 275 165 560 320 560
237 337 372 336 40 59 12454/B 160 15 168 900 337 395 440 436 50 49 14456/A 132 3 114 764 237 337 372 336 40 59 12456/B 132 4 130 764 237 337 372 336 40 59 12Dimensioni in mm/Dimensions in mm
(fig. 1)
(fig. 2)
(fig. 3)
(fig. 4)
(fig. 3) (fig. 4)
Peso ventilatore in kg (completo di motore) Weight of fan in kg (complete with motor)
131