Top Banner
Varco BJ Casing Running Tool 159 Varco BJ Casing Running Tool CRT-14 Designed for running casing, the type CRT 14 Casing Running Tool combines years of operational experience between the TDS and FMS (Flush Mounted Spider). Compact, it uses Varco’s field proven technology while increasing the work efficiency on the rig. The CRT 14 is installed onto the shaft of the Top Drive for rotation, torque and suspended from links for load transfer. By being able to instantaneously start rotation and circulation through the casing string, the CRT 14 reduces the probability of stuck casing. The tool also has the ability to push casing into the well with 40,000 lbs force allowing for stripping-in during underbalanced drilling operations. The design eliminates the power casing tong operation near well center in addition to a person at the stabbing board, maintains proper alignment during stabbing and make- up of casing, adds the ability for soft stabbing and thread compensation while minimizing casing thread damage. Purposely designed, the fill-up tool allows for fast change-out of seal and guide elements when running mixed strings. The seals on the fill-up tool prevent spillage of expensive drilling fluids reducing the chance of environmental incidents. Features include: use of standard SL, FMS slips and bottom guides, standard 132/144/ 180 inch links, air-cushioned weight compensator, torque/turn controls and logging for premium casing connections are included. Specifications Weight and Size Weight 12,000 lbs. (5,443 kg) Case Size Range O.D. 4 1 / 2 ” (114 mm) to 14” (356 mm) Fill-up Tool 9 5 / 8 ” (244 mm) to 14” (356 mm) Make-up Torque 45,000 lb. ft. (61,012 Nm) Hoist Capacity 500 Tons API 8C Push Down Force 40,000 lbs (18,144 kg) Mud Circulation Pressure 5,000 psi
56

Casing Tools

Jan 19, 2016

Download

Documents

Jesus Oliveros
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Casing Tools

Varco BJ

Casing Running Tool

159

Varco BJCasing Running Tool

CRT-14

Designed for running casing, the type CRT 14 Casing Running Tool combines years of operational experience between the TDS and FMS (Flush Mounted Spider). Compact, it uses Varco’s field proven technology while increasing the work efficiency on the rig.The CRT 14 is installed onto the shaft of the Top Drive for rotation, torque and suspended

from links for load transfer. By being able to instantaneously start rotation and circulation through the casing string, the CRT 14 reduces the probability of stuck casing. The tool also has the ability to push casing into the well with 40,000 lbs force allowing for stripping-in during underbalanced drilling operations. The design eliminates the power casing tong operation near well center in addition to a person at the stabbing board, maintains proper alignment during stabbing and make-up of casing, adds the ability for soft stabbing and thread compensation while minimizing casing thread damage. Purposely designed, the fill-up tool allows for fast change-out of seal and guide elements when running mixed strings. The seals on the fill-up tool prevent spillage of expensive drilling fluids reducing the chance of environmental incidents.Features include: use of standard SL, FMS slips and bottom guides, standard 132/144/180 inch links, air-cushioned weight compensator, torque/turn controls and logging for premium casing connections are included. Specifications

Weight and SizeWeight 12,000 lbs. (5,443 kg)

Case Size Range O.D. 4 1/2” (114 mm) to 14” (356 mm)

Fill-up Tool 9 5/8” (244 mm) to 14” (356 mm)

Make-up Torque 45,000 lb. ft. (61,012 Nm)

Hoist Capacity 500 Tons API 8C

Push Down Force 40,000 lbs (18,144 kg)

Mud Circulation Pressure 5,000 psi

Page 2: Casing Tools

Varco BJ

BX Hydraulically Actuated Elevator

160

BX Hydraulically Actuated Elevator

BX Hydraulically Actuated Elevator

■ Purpose designed for hydraulic actuated operation

■ Cost competitive with normal rig complement of air-operated, drill pipe, drill collar and casing elevators.

■ The most economic way to fully actuate all elevator functions.

■ Double Door design for optimal balance and performance.

■ The hydraulic cylinders are located inside the body casting for clean lines and maximum protection, and yet they are accessible for normal maintenance.

■ Changeable bushings allow one elevator frame to handle all pipe size and type requirements.

■ Bushings are locked into place with spring loaded pins for quick, easy removal and installation.

■ Bushings can be changed within 5 minutes.

■ No special tools are needed, no loose nuts, bolts or pins.

■ Hinge journals are bushed to put major wear into replaceable components.

■ One door bushing is spring loaded with linkage connecting it to a locking pin. Any load on this bushing segment engages the pin preventing the elevator from opening. This safety lock prevents the elevator from opening under load.

■ The elevator is prepared for an interlock system as an option when used with a power slip.

■ A trigger mechanism initiates the closing sequence when pipe is thrown into the elevator.

■ Additional equipped with a rotary actuator can be tilted to pick up pipe from the V-door, eliminating the need for single joint elevators.

Specifications

Rotator part number: 50004130

BX Hydraulically Actuated Elevator

Maximum Rating

Frame Frame P/N Size Range 18° Tool

Joint 90°1

Coupling Shoulder

NOTES:1. Make sure not to use the BX elevator to support loads in excess of the casing manufacturers recommended de-

sign loads, nor at loads higher than the coupling is designed to hold.

Special Square Riser

BushingDrill Collars1

Link Size

Min. Max.

3 203300Y10 9 5/8" - 20" n/a 350 ton n/a 350 ton 2 3/4” 3 1/2”

4-50 203290Y10 2 3/8" - 9 3/4" 500 ton 500 ton n/a 350 ton 2 3/4” 4 3/4”

4-75 203200Y10 2 3/8" - 9 3/4" 500 ton 500 ton 750 ton 350 ton 3 1/2” 4 3/4”

5 50004000Y10 3 1/2" - 11" 750 ton 750 ton 1000 ton 350 ton 4 3/4” 5 1/2”

BX Hydraulically Actuated Elevator Power Requirements

Power RequirementsPressure 2000 psiFlow rate 5 GPM

Hydraulic lines1

NOTES:1. 2 Additional hydraulic lines required when using rotators.

3 @ 1/2”

Page 3: Casing Tools

Varco BJ

BX Hydraulically Actuated Elevator

161

Overview BX-4-50, 4-75 Bushings

Casing SizeWeight (kg / lbs) per segment

203210Y129 4 1/2” Casing bushing 22/48

203210Y131 5” Casing bushing 22/48

203210Y132 5 1/2” Casing bushing 22/48

203210Y135 6 5/8” Casing bushing 20/44

203210Y136 7” Casing bushing 20/44

203210Y137 7 5/8” Casing bushing 20/44

203210Y705 7 3/4” Casing bushing 20/44

203210Y139 8 5/8” Casing bushing 18/39

203210Y141 9 5/8” Casing bushing 18/39

Tubing203210Y158 2 3/8” Plain tubing bushing 23/51

203210Y159 2 3/8” OD.EU. Tubing bushing 23/51

203210Y160 2 7/8” Plain tubing bushing 23/51

203210Y161 2 7/8” OD. EU. Tubing bushing 23/51

203210Y162 3 1/2” Plain tubing bushing 23/51

203210Y163 3 1/2” OD. EU. Tubing bushing 23/51

203210Y164 4” OD. Plain tubing bushing 22/48203210Y165 4” OD. EU. Tubing bushing 22/48

203210Y167 4 1/2” OD. EU. Tubing bushing 22/48

Drill Collars Zip Lift203211Y735 3 1/8” DC with Zip lift bushing 23/51

203211Y736 3 3/8” DC with Zip lift bushing 23/51

203211Y625 3 1/2” DC with Zip lift bushing 23/51

203211Y177 4 1/8” DC with Zip lift bushing 22/48

203211Y674 4 1/4” DC with Zip lift bushing 22/48

203211Y435 4 3/4” DC with Zip lift bushing 22/48

203211Y530 5” DC with Zip lift bushing 22/48

203211Y179 5 1/4” DC with Zip lift bushing 22/48

203211Y362 6” DC with Zip lift bushing 20/44

203211Y337 6 1/4” DC with Zip lift bushing 20/44

203211Y409 6 3/8” DC with Zip lift bushing 20/44

203211Y373 6 1/2” DC with Zip lift bushing 20/44

203211Y387 6 3/4” DC with Zip lift bushing 20/44

203211Y361 7” DC with Zip lift bushing 20/44

203211Y357 7 1/4” DC with Zip lift bushing 20/44

203211Y339 7 3/4” DC with Zip lift bushing 20/44

203211Y336 8” DC with Zip lift bushing 18/39

203211Y422 8 1/4” DC with Zip lift bushing 18/39

203211Y426 8 1/2” DC with Zip lift bushing 18/39

203211Y427 9” DC with Zip lift bushing 18/39

203211Y370 9 1/2” DC with Zip lift bushing 18/39

203211Y367 9 3/4” DC with Zip lift bushing 18/39

Overview BX-4-50, 4-75 Bushings

Drill Pipe SizeWeight (kg / lbs) per segment

203212Y117 2 7/8” IU DP bushing 23/51203212Y118 2 7/8” EU DP bushing 23/51

203212Y7763 1/2” IEU DC Bushing

Max. TJ. OD. Incl. Hardf. 6 3/423/51

203212Y7774” IU DP bushing

Max. TJ. OD. Incl. Hardf. 6 3/421/46

203212Y7784” EU & 4 1/2” IEU DP bushing

Max. TJ. OD. Incl. Hardf. 6 3/421/46

203212Y7794 1/2” EU & 5” IEU DP bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

203212Y7805 1/2” IEU DP bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

203212Y7815 1/2” IF IEU DP bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

203212Y7895 7/8” DP bushing (6”Upset max.)

max. TJ. OD. Incl. Hardf. 7 3/4”20/44

203212Y7826 5/8” IEU DP bushing

max. TJ. OD. Incl. Hardf. 9 1/420/44

Drill Collars Plain

(Lift-Plug)203213Y201 2 1/2” DC plain bushing 21/46203213Y203 2 3/4” DC plain bushing 21/46203213Y205 3” DC plain bushing 21/46203213Y206 3 1/8” DC plain bushing 21/46203213Y207 3 1/4” DC plain bushing 21/46203213Y795 3 3/8” DC plain bushing 21/46203213Y211 3 3/4” DC plain bushing 21/46203213Y519 4 1/8” DC plain bushing 21/46203213Y548 4 1/4” DC plain bushing 21/46203213Y354 4 3/4” DC plain bushing 21/46203213Y349 6” DC plain bushing 21/46203213Y348 6 1/4” DC plain bushing 20/44203213Y135 6 1/2” DC plain bushing 20/44203213Y338 6 3/4” DC plain bushing 20/44203213Y334 8” DC plain bushing 18/39203213Y347 8 1/4” DC plain bushing 18/39203213Y580 8 1/2” DC plain bushing 18/39203213Y356 9” DC plain bushing 18/39203213Y346 9 1/2” DC plain bushing 18/39

Special square

shoulder BX 4-75 ONLY!!

203214Y790 7” Riser handling bushing 17.5/38203214Y757 8” Riser handling bushing 17.5/38203214Y783 8 3/4” Riser handling bushing 17.5/38203214Y784 8 5/8” Riser handling bushing 17.5/38203214Y788 9 5/8” Riser handling bushing 17.5/38

Page 4: Casing Tools

Varco BJ

BX Hydraulically Actuated Elevator

162

Overview BX-3 Bushings

Casing Size Weight (kg / lbs) Per Segment

203310Y141 9 5/8" 43/95

203310Y649 9 7/8" 43/95

203310Y142 10 3/4" 42/92

203310Y453 10 5/8 42/92

203310Y143 11 3/4" 41/90

203310Y729 11 7/8" 41/90

203310Y345 12 3/4" 39/86

203310Y676 12 7/8" 39/86

203310Y144 13 3/8" 37/81

203310Y596 13 5/8" 37/81

203310Y690 14" 37/81

203310Y145 16" 32/70

203310Y664 16 3/4" 32/70

203310Y723 18" 25/55

203310Y146 18 5/8" 25/55

203310Y147 20" 20/44

Drill Collars Plain Size Weight (kg / lbs)

Per Segment203312Y228 10" DC plain 40/88

203312Y229 10 1/2" DC plain 40/88

203312Y230 11" DC plain 40/88

Page 5: Casing Tools

Varco BJ

BX Hydraulically Actuated Elevator

163

Overview BX-5 Bushings

Casing Size Weight (kg / lbs) Per Segment

50004010Y129 4 1/2” Casing bushing 22/48

50004010Y130 4 3/4” Casing bushing 22/48

50004010Y131 5” Casing bushing 22/48

50004010Y132 5 1/2” Casing bushing 22/48

50004010Y133 5 3/4” Casing bushing 22/48

50004010Y134 6” Casing bushing 20/44

50004010Y135 6 5/8” Casing bushing 20/44

50004010Y136 7” Casing bushing 20/44

50004010Y137 7 5/8” Casing bushing 20/44

50004010Y705 7 3/4” Casing bushing 20/44

50004010Y139 8 5/8” Casing bushing 18/39

50004010Y141 9 5/8” Casing bushing 18/39

50004010Y649 9 7/8” Casing bushing 18/39

50004010Y142 10 3/4” Casing bushing 18/39

Drill Collars Zip Lift Size

Weight(kg / lbs)

Per Segment

50004011Y435 4 3/4” DC with Zip lift bushing 22/48

50004011Y362 6” DC with Zip lift bushing 20/44

50004011Y337 6 1/4” DC with Zip lift bushing 20/44

50004011Y373 6 1/2” DC with Zip lift bushing 20/44

50004011Y387 6 3/4” DC with Zip lift bushing 20/44

50004011Y339 7 3/4” DC with Zip lift bushing 20/44

50004011Y336 8” DC with Zip lift bushing 18/39

50004011Y422 8 1/4” DC with Zip lift bushing 18/39

50004011Y426 8 1/2” DC with Zip lift bushing 18/39

50004011Y427 9” DC with Zip lift bushing 18/39

50004011Y370 9 1/2” DC with Zip lift bushing 18/39

50004011Y367 9 3/4” DC with Zip lift bushing 18/39

50004011Y195 10” DC with Zip lift bushing 18/39

50004011Y527 10 3/4” DC with Zip lift bushing 18/39

50004011Y419 11” DC with Zip lift bushing 18/39

Drill Pipe SizeWeight

(kg / lbs) Per Segment

50004012Y7763 1/2” IEU DC Bushing

Max. TJ. OD. Incl. Hardf. 6 3/423/51

50004012Y7774” IU DP Bushing

Max. TJ. OD. Incl. Hardf. 6 3/421/46

50004012Y7784” EU & 4 1/2” IEU DP Bushing

Max. TJ. OD. Incl. Hardf. 6 3/421/46

50004012Y7794 1/2” EU & 5” IEU DP Bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

50004012Y7805 1/2” IEU DP Bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

50004012Y7815 1/2” IF IEU DP Bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

50004012Y7895 7/8” DP Bushing (6” Upset max.)

max. TJ. OD. Incl. Hardf. 7 3/4”20/44

50004012Y7826 5/8” IEU DP Bushing

max. TJ. OD. Incl. Hardf. 9 1/420/44

Drill Collars Plain

(Lift-Plug)Size

Weight(kg / lbs)

Per Segment

50004013Y354 4 3/4” DC Plain bushing 22/48

50004013Y219 5 1/4” DC Plain bushing 20/44

50004013Y348 6 1/4” DC Plain bushing 20/44

50004013Y135 6 1/2” DC Plain bushing 20/44

50004013Y334 8” DC Plain bushing 18/39

50004013Y347 8 1/4” DC Plain bushing 18/39

50004013Y580 8 1/2” DC Plain bushing 18/39

50004013Y356 9” DC Plain bushing 18/39

50004013Y346 9 1/2” DC Plain bushing 18/39

50004013Y228 10” DC Plain bushing 18/39

50004013Y229 10 1/2” DC Plain bushing 18/39

50004013Y230 11” DC Plain bushing 18/39

Special Square

Shoulder Size

Weight(kg / lbs)

Per Segment50004014Y757 Riser handling bushing 8” 18/39

50004014Y783 Riser handling bushing 8 3/4” 18/39

50004014Y784 Riser handling bushing 8 5/8” 18/39

50004014Y788 Riser handling bushing 9 5/8” 18/39

Page 6: Casing Tools

Varco BJ

PS 21/30 Hydraulic Power Slip

164

PS 21/30 Hydraulic Power Slip

Installs flush with the drill floor■ Improves both safety and rig efficiency as

proven with the FMS Flush Mounted Casing Slip.

■ Eliminates work platforms for stabbing and operating power tongs during casing running operations.

Power down slips■ Reacts up to 45,000 ft lbs of torque, on

14” casing with sufficient string weight.Insert carriers make this a universal tool, not just another power slip

■ Allows the PS 21 to handle all pipe types and sizes, including BHAs, collars, drill pipe, casing and tubing from 2 3/8” to 14” and PS 30 from 2 3/8” to 20”

■ Quick changeover from BHA’s to collars to drill pipe allows the PS 21/30 to trip the entire string.

■ Insert carriers can be changed with pipe in the hole.

■ Carrier change can be done in 5 minutes or less.

■ Special “drop and lock, pull and release” design eliminates loose pieces such as bolts and pins.

■ The PS 21/30 can be fitted with insert bowls should it become necessary to use hand slips.

Like the insert carriers, the slips also have a rapid change system

■ Two handles on the middle slip segmentretract and lock the spring-loaded slip retaining pin.

■ No loose parts.Centering device

■ The PS 21/30 is standard equipped with a centering device incorporated in the top cover

Slip set-back designed to pass tool joints, BHAs and casing centralizers

■ The slip set back allows tool joints and drill pipe protectors to pass without dragging on the inserts, even when drilling with6 5/8” drill pipe.

■ The PS 21/30 will pass: BHAs when tripping; Centralizers when running casing.

Control Panel■ A control panel, which can be located in

the driller’s console, enables the driller to operate the slips.

PS 21/30 SpecificationsPS 21 PS 30

For rotary table size 37 1/2” 49 1/2”

Pipe size range 2 3/8” to 14” 2 3/8” to 20”Load rating 500 T 750 T

Hydraulic RequirementsPressure1

NOTES:1. Pressure in return line not to exceed 200 psi.

2300 - 2500 psi 2300 - 2500 psiFlow rate 10 GPM 10 GPM

PS 21 P/N

PS 30 P/N

Body2

2. Specify rotary brand

202200 202400Hand slip bowl # 3 10 3/4” slip 202361 202361Hand slip bowl # 3 16” slip — 202364Hand slip bowl # 2 16” slip — 202363Hand slip bowl # 1 16” slip — 202362Hand slip bowl # 3 10 3/4”

removal tool50004550-21 50004550-21

Hand slip bowl # 1 16” removal tool — 50004550-30

Pogo stick 50004600-1 50004600-1Slip removal tool 50004551 50004551Slip handle operating tool 50004552 50004552Extension kit for slip handles 50004604-1 50004604-1Hook up kit3

3. Part number is rig specific, please call.

To be advised To be advisedPS 30 Adapter plates 49 1/2”Emsco → National — 50004580

Oilwell → National — 50004581

Wirth → National — 50004582

Page 7: Casing Tools

Varco BJ

PS 21 Size Components Data

165

PS 21 Size Components Data

PS 21 Size Components Data

SlipP/N

Clampingdiameter [inches]

Pipe type

Zip DC [inches]

Plain DC [inches]

Rating [Tons]

Slip assy / Insert Carrier

P/N

Dressing Kit P/N

Insert P/N

Load ringP/N

Ram/Ram-

insertsP/N

Throat opening

(slips up) [inches]

Inserts directly in

slip

14 Csg — — 500 202250-1400

51202250-1400 2635 — 202347-

1400 18

13 5/8 Csg — — 500 202250-1363

51202250-1363 2653 — 202347-

136317 5/8

13 3/8 Csg — — 500 202250-1338

51202250-1338 2636 — 202347-

133817 3/8

12 3/4 Csg — — 500 202250-1275

51202250-1275 2657 — 202347-

127517 3/4

11 7/8 Csg — — 500 202250-1188

51202250-1188 2651 — 202347-

118816 7/16

11 3/4 Csg — — 500 202250-1175

51202250-1175 2637 — 202347-

117516 5/16

202250-1 11 1/8 Csg — — 500 202270-1113

51202270-1113 2651 — 202346-

111315 3/4

202250-1 10 7/8 Csg — — 500 202270-1088

51202270-1088 2651 — 202346-

108815 1/2

202250-1 10 3/4 Csg — — 500 202270-1075

51202270-1075 2637 — 202346-

107515 3/8

202250-1 9 7/8 Csg — — 500 202270-988

51202270-988 2650 — 202346-

98814 9/16

202250-1 9 5/8 Csg — — 500 202270-963

51202270-963 2656 — 202346-

96314 5/16

202250-1 9 1/2 Csg — — 500 202270-950

51202270-950 2657 — 202346-

95014 1/2

202250-1 9 1/8 Csg — — 500 202279-913

51202279-913 2637 — 202346-

91314 1/4

202250-1 8 5/8 Csg — — 500 202279-863

51202279-863 2652 — 202346-

86313 1/2

202250-1 7 3/4 Csg — — 500 202279-775

51202279-775 17080 — 202346-

775 13

202250-1 7 5/8 Csg — — 500 202273-763

51202273-763 2633 50004573-3 202346-

76312 1/2

202250-1 7 Csg — — 500 202273-700

51202273-700 2623 50004573-3 202346-

70011 7/8

202250-1 6 5/8 Csg/DP — — 500 202273-663

51202273-663 2632 50004573-3 202346-

66311 5/8

202250-1 6 1/2 Csg — — 500 202369-650

51202369-650 2173 50004573-2 202346-

65011 1/2

202250-1 6 9/64 Csg/DP — — 500 202369-614

51202369-614 2172 50004573-2 202346-

61411 1/8

202250-1 6 Csg/DP — — 500 202369-600

51202369-600 2169 50004573-2 202346-

60011

202250-1 5 7/8 DP — — 500 202369-588

51202369-588 2623 50004573-2 202346-

588 11

202250-1 5 1/2 Csg/DP — — 500 202274-550

51202274-550 2170 50004573-5 202346-

55010 3/4

202250-1 5 Csg/DP — — 500 202274-500

51202274-500 2169 50004573-5 202346-

50010 1/4

202250-1 4-1/2 Tbg/DP — — 500 202274-450

51202274-450 2168 50004573-5 202346-

4509 3/4

Page 8: Casing Tools

166

Varco BJ

PS 21 Size Components Data

202250-1 4 Tbg/DP — — 500 202278-400

51202278-400 2162 50004573-6 202346-

4009 3/8

202250-1 9 1/2 DC 10 9 1/2 350 202271-950

51202271-950 2633 — — 14 3/16

202250-1 9 1/4 DC 9-3/4 9 1/4 350 202271-925

51202271-925 2655 — — 16 15/16

202250-1 9 DC 9-1/2 9 350 202271-900

51202271-900 2633 — — 13 11/16

202250-1 8 3/4 DC 9 1/4 8 3/4 350 202271-875

51202271-875 2655 — — 13 9/16

202250-1 8 5/8 DC 9 1/8 8 -5/8 350 202271-863

51202271-863 2653 — — 13 1/2

202250-1 8 1/2 DC 9 8 1/2 350 202271-850

51202271-850 2652 — — 13 7/16

202250-1 8 1/4 DC 8 3/4 8 -1/4 350 202271-825

51202271-825 2638 — — 12 7/8

202250-1 8 1/8 DC 8 5/8 8 1/8 350 202271-813

51202271-813 2650 — — 12 3/4

202250-1 8 DC 8 1/2 8 350 202272-800

51202272-800 2633 — — 13-1/4

202250-1 7 3/4 DC 8 1/4 7 3/4 350 202272-775

51202272-775 2655 — — 13

202250-1 7 1/2 DC 8 7 1/2 350 202272-750

51202272-750 2652 — — 12 3/4

202250-1 7 1/4 DC 7 3/4 7 1/4 350 202272-725

51202272-725 2638 — — 12 1/2

202250-1 6 3/4 DC 7 1/4 6 3/4 350 202275-675

51202275-675 2633 — — 11 1/4

202250-1 6 1/2 DC 7 6 1/2 350 202275-650

51202275-650 2633 — — 11

202250-1 6 1/4 DC 6 3/4 6 1/4 350 202275-625

51202275-625 2655 — — 10 7/8

202250-1 6 DC 6 1/2 6 350 202275-600

51202275-600 2652 — — 10 7/8

202250-1 5 3/4 DC 6 1/4 5 3/4 350 202275-575

51202275-575 2638 — — 10 5/8

202250-1 5 5/8 DC 6 1/8 5 5/8 350 202275-563

51202275-563 2650 — — 10 1/2

202250-1 3 1/2 Tbg/DP — — 350 202277-350

51202277-350 2162 50004573-4 202346-

3508 7/8

202250-1 3 1/8 Tbg/DP — — 350 202277-313

51202277-313 2172 50004573-4 202346-

3138 5/8

202250-1 2 7/8 Tbg/DP — — 350 202277-288

51202277-288 2161 50004573-4 202346-

2888 1/2

202250-1 2 3/8 Tbg/DP — — 350 202277-238

51202277-238 2160 50004573-4 202346-

2388 1/8

202250-1 4 3/4 DC 5 1/4 4 3/4 225 202276-475

51202276-475 2165 — — 10

202250-1 4 5/8 DC — 4 5/8 225 202276-463

51202276-463 2655 — — 9 7/8

202250-1 4 3/8 DC 4 3/4 4 3/8 225 202276-438

51202276-438 2172 — — 9 3/4

202250-1 4 1/4 DC — 4 1/4 225 202276-425

51202276-425 2166 — — 9 5/8

202250-1 4 DC — 4 225 202276-400

51202276-400 2638 — — 9 3/8

PS 21 Size Components Data (Continued)

SlipP/N

Clampingdiameter [inches]

Pipe type

Zip DC [inches]

Plain DC [inches]

Rating [Tons]

Slip assy / Insert Carrier

P/N

Dressing Kit P/N

Insert P/N

Load ringP/N

Ram/Ram-

insertsP/N

Throat opening

(slips up) [inches]

Page 9: Casing Tools

Varco BJ

PS 30 Size Components Data

167

PS 30 Size Components Data

PS 30 Size Components Data

SlipP/N

Clamp-ing diam-

eter [inches]

PipeType

Zip DC [inches]

Plain DC [inches]

Rating[Tons]

Slip assy / Insert Carrier

P/N

Dressing Kit P/N

InsertP/N

Load ring P/N

Ram/Ram-

inserts P/N

Throat opening

(slips up) [inches]

Insertsdirectlyin slip

20 Csg — — 500 202430-2000

51202430-2000 2635 — 202381-

2000 24

18 5/8 Csg — — 500 202430-1863

51202430-1863 17080 — 202381-

186322 3/4

202430-1 18 Csg — — 500 202430-1800

51202430-1800 2635 — 202381-

1800 22

202430-1 16 Csg — — 750 202440-1600

51202440-1600 2635 — 202386-

1600 20

202430-1 14 Csg — — 750 202441-1400

51202441-1400 2635 — 202386-

1400 18

202430-1 13 5/8 Csg — — 750 202441-1363

51202441-1363 2653 — 202386-

136317 5/8

202430-1 13 3/8 Csg — — 750 202441-1338

51202441-1338 2636 — 202386-

133817 3/8

202430-1 12 3/4 Csg — — 750 202441-1275

51202441-1275 2657 — 202386-

127517 1/4

202430-1 11 7/8 Csg — — 750 202442-1188

51202442-1188 2651 — 202386-

118816 7/16

202430-1 11 3/4 Csg — — 750 202442-1175

51202442-1175 2637 — 202386-

117516 5/16

202430-1 10 3/4 Csg — — 750 202443-1075

51202443-1075 2637 — 202386-

107515 3/8

202430-1 9 7/8 Csg — — 750 202443-988

51202443-988 2650 — 202386-

98814 7/16

202430-1 9 5/8 Csg — — 750 202443-963

51202443-963 2656 — 202386-

96314 5/16

202430-1 7 5/8 Csg — — 750 202445-763

51202445-763 2633 50004573-1 202386-

76314 1/2

202430-1 7 Csg — — 750 202445-700

51202445-700 2623 50004573-1 202386-

70013 7/8

202430-1 6 5/8 Csg/DP — — 750 202445-663

51202445-663 2632 50004573-1 202386-

66313 1/2

202433-1 6 1/2 Csg — — 750 202445-650

51202445-650 2673 50004573-1 202386-

65013 3/8

202430-1 5 7/8 DP — — 750 50004569-588

51004598-588 2623 50004573-2 202386-

588 11

202430-1 5 1/2 Csg/DP — — 750 202446-550

51202446-550 2170 50004573 202386-

55010 3/4

202430-1 5 Csg/DP — — 750 202446-500

51202446-500 2169 50004573 202386-

50010 1/4

202430-1 4 1/2 Tbg/DP — — 750 202446-450

51202446-450 2168 50004573 202386-

4509 3/4

202433-1 11 1/8 Csg — — 500 202270-1113

51202270-1113 2651 — 202386-

111315 3/4

202433-1 10 3/4 Csg — — 500 202270-1075

51202270-1075 2637 — 202386-

107515 3/8

Page 10: Casing Tools

168

Varco BJ

PS 30 Size Components Data

202433-1 9 7/8 Csg — — 500 202270-988

51202270-988 2650 — 202386-

98814 9/16

202433-1 9 5/8 Csg — — 500 202270-963

51202270-963 2656 — 202386-

96314 5/16

202433-1 9 1/8 Csg — — 500 202279-913

51202279-913 2637 — 202386-

91314 1/4

202433-1 8 5/8 Csg — — 500 202279-863

51202279-863 2652 — 202386-

86313 1/2

202433-1 7 3/4 Csg — — 500 202279-775

51202279-775 17080 — 202386-

775 13

202433-1 7 5/8 Csg — — 500 202273-763

51202273-763 2633 50004573-3 202386-

76312 1/2

202433-1 7 Csg — — 500 202273-700

51202273-700 2623 50004573-3 202386-

70011 7/8

202433-1 6 5/8 Csg/DP — — 500 202273-663

51202273-663 2632 50004573-3 202386-

66311 5/8

202433-1 6 1/2 Csg — — 500 202369-650

51202369-650 2173 50004573-2 202386-

65011 1/2

202433-1 6 9/64 Csg/DP — — 500 202369-614

51202369-614 2172 50004573-2 202386-

61411 1/8

202433-1 5 7/8 DP — — 500 202369-588

51202369-588 2623 50004573-2 202386-

588 11

202433-1 5 1/2 Csg/DP — — 500 202274-550

51202274-550 2170 50004573-5 202386-

55010 3/4

202433-1 5 Csg/DP — — 500 202274-500

51202274-500 2169 50004573-5 202386-

50011 1/4

202433-1 4 1/2 Tbg/DP — — 500 202274-450

51202274-450 2168 50004573-5 202386-

4509 3/4

202433-1 4 Tbg/DP — — 500 202278-400

51202278-400 2162 50004573-6 202386-

4009 3/8

202433-1 9 1/2 DC 10 9 1/2 350 202271-950

51202271-950 2633 — — 14 3/16

202433-1 9 1/4 DC 9 3/4 9 1/4 350 202271-925

51202271-925 2655 — — 16 15/16

202433-1 9 DC 9 1/2 9 350 202271-900

51202271-900 2633 — — 13 11/16

202433-1 8 3/4 DC 9 1/4 8 3/4 350 202271-875

51202271-875 2655 — — 13 9/16

202433-1 8 5/8 DC 9 1/8 8 5/8 350 202271-863

51202271-863 2653 — — 13 1/2

202433-1 8 1/2 DC 9 8 1/2 350 202271-850

51202271-850 2652 — — 13 7/16

202433-1 8 1/4 DC 8 3/4 8 1/4 350 202271-825

51202271-825 2638 — — 12 7/8

202433-1 8 1/8 DC 8 5/8 8 1/8 350 202271-813

51202271-813 2650 — — 12 3/4

202433-1 8 DC 8 1/2 8 350 202272-800

51202272-800 2633 — — 13 1/4

202433-1 7 3/4 DC 8 1/4 7 3/4 350 202272-775

51202272-775 2655 — — 13

202433-1 7 1/2 DC 8 7 1/2 350 202272-750

51202272-750 2652 — — 12 3/4

PS 30 Size Components Data (Continued)

SlipP/N

Clamp-ing diam-

eter [inches]

PipeType

Zip DC [inches]

Plain DC [inches]

Rating[Tons]

Slip assy / Insert Carrier

P/N

Dressing Kit P/N

InsertP/N

Load ring P/N

Ram/Ram-

inserts P/N

Throat opening

(slips up) [inches]

Page 11: Casing Tools

Varco BJ

PS 30 Size Components Data

169

202433-1 7 1/4 DC 7 3/4 7 1/4 350 202272-725

51202272-725 2638 — — 12 1/2

202433-1 6-3/4 DC 7 1/4 6-3/4 350 202275-675

51202275-675 2633 — — 11 1/4

202433-1 6-1/2 DC 7 6-1/2 350 202275-650

51202275-650 2633 — — 11

202433-1 6-1/4 DC 6 3/4 6-1/4 350 202275-625

51202275-625 2655 — — 10 7/8

202433-1 6 DC 6-1/2 6 350 202275-600

51202275-600 2652 — — 10 7/8

202433-1 5 3/4 DC 6 1/4 5-3/4 350 202275-575

51202275-575 2638 — — 10 5/8

202433-1 5 5/8 DC 6 1/8 5-5/8 350 202275-563

51202275-563 2650 — — 10 1/2

202433-1 3 1/2 Tbg/DP — — 350 202277-350

51202277-350 2162 50004573-4 202386-

3508 7/8

202433-1 3 1/8 Tbg/DP — — 350 202277-313

51202277-313 2172 50004573-4 202386-

3138 5/8

202433-1 2 7/8 Tbg/DP — — 350 202277-288

51202277-288 2161 50004573-4 202386-

2888 1/2

202433-1 2 3/8 Tbg/DP — — 350 202277-238

51202277-238 2160 50004573-4 202386-

2388 1/8

202433-1 4 3/4 DC 5 -1/4 4-3/4 225 202276-475

51202276-475 2165 — — 10

202433-1 4 5/8 DC — 4-5/8 225 202276-463

51202276-463 2655 — — 9 7/8

202433-1 4 3/8 DC 4 3/4 4-3/8 225 202276-438

51202276-438 2172 — — 9 3/4

202433-1 4 1/4 DC — 4-1/4 225 202276-425

51202276-425 2166 — — 9 5/8

202433-1 4 DC — 4 225 202276-400

51202276-400 2638 — — 9 3/8

PS 30 Size Components Data (Continued)

SlipP/N

Clamp-ing diam-

eter [inches]

PipeType

Zip DC [inches]

Plain DC [inches]

Rating[Tons]

Slip assy / Insert Carrier

P/N

Dressing Kit P/N

InsertP/N

Load ring P/N

Ram/Ram-

inserts P/N

Throat opening

(slips up) [inches]

Page 12: Casing Tools

Varco BJ

Rotary Support Table, Power Unit

170

Rotary Support Table, Power Unit

RST Rotary Support TableSmaller, lighter and more cost effective for top drive equipped rigs

■ Uses hydraulic motors directly geared to the rotary drive gear.

■ Eliminates the transmission and the drive train.

■ Standard hydraulic operated lock permits the table to be locked at any position, in both directions.

■ Reduces the rotary skid size.■ Lower maintenance costs.■ Hydraulic dynamic slip ring allows

operation of PS 21/30 power slip without manually breaking/making hydraulic connections.

■ Central lubrication system allows easy greasing of all moving parts. Optional automated central greasing system available.

■ Maximum back-up torque on locks is 120000 ft lbs.

■ Can be ordered with solid adapter to reduce from 60 1/2” to 49 1/2”, and/or hinged adapter to reduce 49 1/2” to 37 1/2”.

■ External hydraulic control station for easy maintenance.

Specifications

Part numbers are rig specific.Power Unit

RST 375 RST 495 RST 605

Table size 37 1/2” 49 1/2” 60 1/2”

Load rating static 750 Tons 1000 Tons 1000 Tons

Torque max. ft lbs (@ 3000 psi) 30000 45000 40000

Operating Speed max. RPM 5 5 5

Speed max.intermittent 15 15 15

Gear ratio — 1:7.05 1:6.63

Dimensions LxWxH 86”x70 3/4”x

273/4”101”x 84”x

301/2”109”x 95”x

301/2”

Weight, approx. lbs 14000 23000 25000

RST Adapter Plates

Size P/N

49 1/2” – 37 1/2”with recess

250305250305-1

60 1/2” – 49 1/2” 50004702-1

■ Used with closed center tools■ Either diesel or electric driven■ Isolation class IP 54 EEXe-II-T3, explosion

proof■ Skid mounted■ Variable displacement pump■ Template controlled with an oil cooler■ Fluid level sensor■ Return line filter■ Power unit can be supplied at various flows

and pressure upto a maximum of 93 GPM @ 1000 psi / 35 GPM @ 2500 psi.

Part number and pricing on request

Power Unit

RST 605 Rotary Support Table

Page 13: Casing Tools

Varco BJ

Hydraulic Cathead

171

Hydraulic Cathead

Hydraulic CatheadDescription:Greater Safety for Rig Personnel. Snatch blocks and multi-line hook-ups are not required for most connections. Shock loads are replaced by a smooth, steady line pull to save wear and tear on rig tongs. Once adjusted, the Varco HC26 pulls to the desired force, up to 32,500 lbs, every time and with a quickness that is unequalled. It will also make-up mousehole connections. This tool features the simplest, most positive automatic cable feed out system yet devised. After completing make-up or break-out the control lever is simply pushed into the detent position. The line will automatically and smoothly feed out and stop ready for the next joint. The HC 26 Hydraulic Cathead, includes cylinder housing and wire line assembly, remote control box assembly and 25 foot hoses to connect cylinder and control box. Does not include main pressure and return hoses.

Specifications: ■ Line Pull : Variable to 26,000 lbs (11794 kg)

@ 2000 psi (140 Bar) variable to 32,500 lbs (14742 kg) @ 2500 psi (170 bar)

■ Speed : 0 to 1.5 ft/sec @ 29 GPM - free line pull (0 to .46 m/sec @ 110 l/min)

■ Stroke : 84” (2134 mm)■ Cylinder Stroke : 42” (1067 mm)■ Line Diameter : 7/8” (22.23 mm)■ Weight : 1883 lbs (854 kg)■ Load Indicator : reads directly in lbs. of line

pull ■ Hydraulic Power Requirements : Flow Rate

Range 29 to 35 GPM (110 to 133 l/min)■ Operating Pressure range : 2000 to 2500 psi

(140 to 170 Bar)Assembly numbers:

■ For Closed-Center operation : 76713■ For Open-Center operation : 76713-1

HC 26 Hydraulic Cathead

Page 14: Casing Tools

Varco BJ

Spinning Wrenches

172

Spinning Wrenches

SSW 10 Spinning WrenchDescription:The Varco Safety Spinning Wrench, SSW 10, is a pneumatically powered tool for spinning drill pipe from 3 1/2” to 5 1/2” O.D. Using the proven principle of frictional drive contact, the spinning wrench can spin drill pipe in or out quickly and efficiently without damage to expensive drill pipe and without the hazards of the dangerous spinning chain.

SSW 10

Specifications:■ Size range 3 1/2” to 5 1/2” (89-140 mm)■ Air Pressure: 90-120 psi (6,2-8,6 bar) ■ Air consumption:240 cfm (510 dm3/s)■ Speed (5” pipe): 80-100 RPM■ Stall torque (5” pipe):1000 ft lbs (1350

Nm)■ Weight: 810 lbs (368 kg)

Assembly number: (less rollers) 10426

SSW 40 Spinning WrenchDescription:Proving the old saying that “Good things come in small packages”, the Varco SSW-40 is not only small in size but also the most powerful pneumatic spinning wrench on the market.

Roller Assembly

Pipe OD 3 1/2 4 4 1/2 5 5 1/2P/N 12035 12040 12045 12050 12055

Designed with the operator in mind, the controls are simple and positioned for ease of handling.An easy adjustment screw eliminates the need to change rollers and can accommodate drill pipe and drill collars from 3 ½” to 9 ½” OD.The SSW-40, proven and tested to Varco’s strict standards for performance and reliability, revolutionizes old ideas about how a spinning wrench should look and work.The speed of the SSW-40’s four drive rollers, powered by two motors, is precisely controlled by the operator to permit the slow walking in of drill collars or fast spinning in or out when tripping pipe.

SSW 40

In a typical spinning operation the rig hand swings the SSW-40 onto the pipe just above the joint upset. The clamp control is pulled and the throttle handle actuated to spin in or out with absolute precision.For added safety spin direction lockout feature is included to prevent spinning pipe in wrong direction.Specifications:

■ Size Range : 3 ½” to 9 ½” (89-241 mm)■ Speed (5” pipe) : 120 RPM■ Stall Torque (5” Pipe) : 1100 ft lbs (1490 Nm)■ Air Pressure : 90-120 psi (6,2-8,6 Bar)■ Air Consumption : 250 cfm (530 l/s)■ Weight : 850 lbs (386 kg)

Assembly number: 73109

Page 15: Casing Tools

Varco BJ

Spinning Wrenches, Torque Wrench

173

Spinning Wrenches, Torque Wrench

SSW 30 Spinning WrenchDescription:The hydraulically powered SSW 30 can spin drill pipe and drill collars from 2 7/8” to 9 1/2” O.D. with no adjustments necessary. Its abundant power will bump up shoulders tight enough so each joint is quickly torqued.This lightweight tool is narrower and has lower profile than previous spinning wrench designs. It achieves its compact shape by using one large cylinder for clamping instead of two.

Specifications:■ Size range 27/8” to 91/2” (73-241 mm) OD■ Normal operating pressure: 2000 psi (140

bar)■ Hydraulic power requirement: 29 to 45 GPM

(110-170 l/min)■ Speed 5” dia pipe): 100 RPM■ Stall torque (5” dia pipe): 900 to 1000 ft lbs

(1215-1350 Nm)■ Weight: 850 lbs (385 kg)

Assembly number: Closed center; 19000-6, open center: 19000-7

SSW 30

TW 61 Hydraulic Torque WrenchDescription:The Varco TW 61 makes-up and breaks-out drill pipe and drill collars from 4” to 8½” OD. Torque is adjustable and can be pre-set to the required value. Upper and lower gripping structures provide the required torque. The TW 61 can rotate the tool joint pin up to 34°, to produce the desired torque while providing its own back-up. A built-in tugger is provided to pull the TW61 back out of the way while lowering or raising pipe stands. The tugger can also be used to assist in pulling the TW61 to a storage position. The tool has 6-foot vertical travel range so it can locate at the exact tool joint height. The TW61 is human engineered with all controls on the front of the tool.

TW 61 Hydraulic torque wrench

Specifications:■ TW61: 4” to 8½” (102-216 mm).■ Make-up Torque : 63,000 ft lbs (85000 Nm)■ Break-out Torque : 75,000 ft lbs (101000

Nm)■ Power requirements : 30-35 GPM (114-133 l/

min) @ 2000 psi (140 Bar)■ Air Pressure (for Tugger) 90-125 psi (6.2-8.6

Bar)■ Weight : 3190 lbs (1450 kg)■ Vertical Positioning (Total travel) 72” (1830

mm)■ Rate of Travel 2”/Sec.■ Cycle Time : @40 GPM■ Clamping Both Jaws : 2.5 Seconds ■ Clamping Upper Jaw : 1.25 Seconds■ Torquing 34° : 2 Seconds

Assembly number : 19999-8

Page 16: Casing Tools

Varco BJ

6600 and 6800 Kelly Spinners

174

6600 and 6800 Kelly Spinners

Description:Models 6600 and 6800 Kelly Spinners can be used for rotating drill pipe slowly, for limited rathole and mousehole drilling and making fast kelly connections. These units are completely reversible; the driller can spin out, as well as spin in, when making connections, therefore, spinning chains are not required.Specifications:

■ Connections: 6 5/8” API Reg LH■ Height: 381/2” (978 mm)■ Diameter: 28” (711 mm)■ Weight:1110 lbs (504 kg)■ Oil grade and Capacity: SAE 40 4 1/4 gal

(4.8 l)■ Stall torque: 1200 ft lbs (1622 Nm)■ Speed: 110 RPM■ Flow (Air 6600) 320 cfm (680 dm3/s)■ Flow (Hydraulic 6800): 24 GPM (91 l/min)■ Rotation: Right & Left

Assembly numbers: Pneumatic Kelly Spinner model 6600complete with thread protectors, control valve, filter lubricator, and 62 foot hoses: 70876.Same as above with 77 feet hoses: 70877.Hydraulic Kelly Spinner model 6800 complete with thread protectors, control valve, filter lubricator, and 62 foot hoses: 70867.Same as above with 77 foot hoses: 70868

Kelly Spinner

Page 17: Casing Tools

Varco BJ

HK 20000 Power Casing Tong

HK 20000 Power Casing Tong

Specifications:■ Size Range: 3 ½” through 14” O.D.■ Torque, high gear 5000 ft. lbs.■ Speed, high gear 66 RPM■ Torque, low gear 21,500 ft. lbs.■ Speed, low gear 17 RPM■ (Max.) Intermittent torque 25,000 ft.lbs.■ Transmission, Two speed 4.12 to 1

Reduction■ Hydraulic power requirement: 66 gal/min

@ 1000 psi■ Weight 2200 lbs.■ Part number: 8532-5000-10■ Suspension Spring assembly: 8532-5108■ Tong torque assembly: 8532-5119

Hoses Couplings1 x 979490-50 2 x 55906-20

1 x 979491-50 2 x 55906-24

HK 20000

175

Jaw Assemblies HK 20000

Pipe Size P/N1(2 Required)

NOTES:1. 5 Dies for all sizes P/N 8500-5565

WeightIn. mm Kg Lbs

3 1/2 88.9 200708-1 42 19.1

4 1/2 114.3 8547-5211 42 19.1

4 3/4 120.7 8547-5205 45 20.5

5 127.0 8547-5206 50 22.7

5 1/2 139.7 8547-5207 50 22.7

5 3/4 146.1 200692 50 22.7

6 152.4 8547-5208 45 20.5

6 5/8 168.3 8547-5209 46 20.9

7 177.8 8547-5026 46 20.9

7 5/8 193.7 8547-5027 42 19.1

8 5/8 219.1 8547-5028 40 18.2

9 5/8 244.5 8547-5029 40 18.2

10 3/4 273.1 8547-5030 40 18.2

11 3/4 298.5 8547-5031 36 16.4

12 304.8 8547-5032 36 16.4

12 3/4 328.5 200691 34 15.5

13 3/8 339.7 8547-5033 34 15.5

14 355.6 8547-5034 34 15.5

Page 18: Casing Tools

Varco BJ

Dynaplex Hooks, Perfection Links

176

Dynaplex Hooks, Perfection Links

The BJ Dynaplex Hook is a premium-quality rotary hook for heavy-duty drilling requirements. Special features: Hydraulic snubber, flexible pin connection and optional hook positioner. The optional hook positioner provides faster, safer operation and cuts down round-trip time. When going in the hole, the positioner automatically rotates the elevator into the correct position for the derrickman to catch the next stand of pipe. The positioner also prevents the hook and elevator from being rotated by the “spin-up” of drillpipe going in the hole. Operators may desire to direct-connect the Dynaplex hook to the traveling block; bail designs have been worked out in cooperation with the manufacturers of the more popular blocks.All standard block manufacturers have been furnished with the necessary dimensions for fitting their equipment to BJ hooks.

Dynaplex Hook

Specifications

Model CapacityTons

HookComplete

With Positioner

Hook Complete

Less Positioner

51000 1000 38327Y —

5750 750 31108Y —

5500 500 26955Y 26955Y1

5350 350 24767Y 24977Y

Perfection LinksDependable, efficient Perfection links are designed for light loads. They are made by forging, bending and electric welding of high-quality steel bar stock, which is then heat-treated and magnafluxed.

Specifications

P/N Sizein

Sizemm

Rated Cap/Set Weight/Set

tons lb kg200450Y130 2x30 51x762 100 121 55

200450Y136 2x36 51x914 100 140 64

200450Y142 2x42 51x1070 100 162 74

200450Y148 2x48 51x1219 100 222 93

200450Y160 2x60 51x1524 100 222 101

Page 19: Casing Tools

Varco BJ

Weldless Links

177

Weldless Links

Weldless links are forged from a single piece of high-grade alloy steel to provide maximum tensile strength. More weight and “plus-diameter” in critical areas make these Varco BJ links extra strong. Short upper eye design means better balance and easier elevator handling, while reducing wear of the eye section against the swivel bail or body.Specifications Weldless Links

P/NSize

Rated Cap/Set

Weight/Set

in mm tons lb kg

16363Y1060 21/4 x60 57x1524 250 480 218

16363Y1072 21/4x72 57x1829 250 530 241

16363Y1084 21/4x84 57x2134 250 580 264

16363Y1096 21/4 x 96 57x2438 250 630 286

16363Y1108 21/4x108 57x2743 250 680 309

16363Y1132 21/4x132 57x3353 250 780 355

16363Y1168 21/4x168 57x4267 250 774 352

26940Y1060 23/4x60 70x1524 350 620 282

26940Y1072 23/4x72 70x1829 350 685 311

26940Y1084 23/4x84 70x2134 350 740 336

26940Y1096 23/4x96 70x2438 350 805 366

26940Y1108 23/4x108 70x2743 350 870 395

26940Y1120 23/4x120 70x3048 350 935 425

26940Y1132 23/4x132 70x3353 350 1000 454

26940Y1144 23/4x144 70x3688 350 1065 484

26940Y1132 23/4x132 70x3353 350 1000 454

26940Y1150 23/4x150 70x3810 350 1095 498

26940Y1168 23/4x168 70x4267 350 1190 541

26940Y1180 23/4x180 70x4572 350 1255 571

26940Y1192 23/4x192 70x4876 350 1320 600

26940Y1216 23/4x216 70x5486 350 1450 659

26940Y1240 23/4x240 70x6096 350 1580 718

26940Y1290 23/4x290 70x7366 350 1852 842

26940Y1360 23/4x360 70x9144 350 2156 980

26940Y1480 23/4x480 70x12192 350 2878 1308

15386Y1108 108” 350 ton special for TDS 4, 5, 6 920 418

25469Y1072 31/2x72 89x1829 500 704 320

25469Y1096 31/2x96 89x2438 500 1056 480

25469Y1108 31/2x108 89x2743 500 1450 659

25469Y1120 31/2x120 89x3048 500 1619 736

25469Y1132 31/2x132 89x3353 500 1670 759

25469Y1144 31/2x144 89x3688 500 1780 809

25469Y1160 31/2x160 89x4064 500 1927 876

25469Y1168 31/2x168 89x4267 500 2000 909

25469Y1180 31/2x180 89x4572 500 2110 959

25469Y1192 31/2x192 89x4826 500 2202 1001

25469Y1216 31/2x216 89x5486 500 2112 960

25469Y1240 31/2x240 89x6096 500 2596 1180

25469Y1264 31/2x264 89x6706 500 2882 1300

16143Y1360 31/2x360 89x9144 500 3568 1622

16143Y1144 43/4x144 121x3688 750 2312 1051

16143Y1160 43/4x160 121x4064 750 3178 1445

16143Y1180 43/4x180 121x4572 750 3900 1769

16143Y1216 43/4x216 121x5486 750 5200 2364

16143Y1240 43/4x240 121x6096 750 3892 1940

16143Y1264 43/4x264 121x6706 750 4268 1940

For Varco Type 1000 Ton Elevator/Spider Only:

70101Y1200 51/2x200 140x5080 1000 5100 2315

For BJ Type 1000 Ton Elevator/Spider Only:

38439Y1180 51/2x180 140x4572 1000 3500 1588

Weldless Links (Continued)

P/NSize

Rated Cap/Set

Weight/Set

in mm tons lb kg

Page 20: Casing Tools

Varco BJ

Weldless Links

178

Dimensions

Varco BJ Weldless links 4 3/4” to 5 1/2”

Weldless Links

Dim. A B C D E F G H

in. 2 1/4 5 1/2 8 2 7/8 8 10 5 14

mm 57.2 139.7 203.2 73.0 203.2 254.0 127.0 355.6

in. 2 3/4 5 1/2 8 3 1/2 9 1/2 12 5 15,7

mm 69.9 139.7 203.2 88.9 203.2 254.0 127.0 355.6

in. 3 1/2 6 3/4 10 1/8 4 1/2 9 1/2 12,4 6 17

mm 88.9 171.5 257.2 114.3 241.3 204.8 152.4 431.8

in. 4 3/4 — — 6 10 1/4 14 1/2 7 1/2 23

mm 120.7 — — 152.4 260.4 368.3 190.5 548.2

in. 5 1/21

NOTES:1. Varco type

— — 6 12 1/2 17 1/2 8 1/4 29 1/4mm 139.7 — — 152.4 317.5 444.5 209.6 743.0

in. 5 1/22

2. BJ type

— — 6 8 13 7 19

mm 139.7 — — 152.4 203.2 330.2 177.8 482.6

Varco BJ Weldless links 2 3/4” to 3 1/2”

Page 21: Casing Tools

Varco BJ

Elevators

179

Elevators

Slip Type Elevators “Y” SeriesVarco BJ “Y” series elevators are conventional slip type elevators for handling tubing and small casing. There are 7 types ranging from 20 to 200 ton capacity and covering pipe sizes from 1.050” to 7 5/8” OD. They feature a four slip design which give an optimum contact on the pipe to prevent bottlenecking and gauge damage.The Varco BJ “YC” type elevator is capable of handling dual tubing strings. All type “Y” series elevators operate with the latch lock combination for safety. The “MYC” and “YC” provide a 7” and the “HYC” a 10 1/2” of insert contact to grip your casing or tubing.

Collar Type Elevators A SeriesCenter-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators feature latch and safety latch lock combinations. Safety features include guarded operating handles to help prevent accidents to operators and an extra handle at the rear of the elevator

18º Type Elevators G SeriesG series elevators are similar in design and construction to the A series, except they are bored to fit the contour of 18º type drill pipe. They are constructed in two halves of practically the same weight for better balance, making them easier to handle; easier to latch on and take off the pipe. In open position, a G-series elevator hangs ready for closing at any point below the upset of the pipe. Safety features include guarded operating handles to help prevent accidents to operators and an extra handle at the rear of the elevator for easier, safer operation.

MGG Elevator

Air Operated ElevatorsVarco BJ offers a complete line of air operated elevators with rated capacities ranging from 150 to 500 ton capacity.The TA-150 is a center-latch elevator for handling zip groove drill collars from 4 3/4” to 11 1/2” with a capacity of 150 tons. The GG is a center-latch elevator for handling 18 degree external upset drill pipe from 4" to 5 1/2” with a rated capacity of 350 tons. The HGG handles the same pipes from 4” to 65/8” with a 500 ton rated capacity. The MGG is also a center latch elevator for handling 18 deg. external upset drill pipe sizes 3 1/2” to 5 1/2” with a rated capacity of 250 tons. The HYC is a slip type elevator to handle tubulars from 2 7/8” through 7 5/8” rated capacity 250 ton.

Page 22: Casing Tools

Varco BJ

Elevators

180

18º Type Elevator BNC ModelThe BNC has a center latch elevator for handling 18º external upset drill pipe and tubing the inside surface of this elevator is induction hardened to provide maximum strength and long service.

Side Door Type Elevators X SeriesThe X-series elevators handle all sizes of collar-type tubing, drill pipe and casing. The SLX has a shielded safety latch mounted on the elevator door. The shield protects the latch from accidental opening. Both latches operate from a single handle, and then automatically relatch when the elevator door is closed. The Type SX side-door elevator, designed for handling large, collar-type casing, is a sturdier, safety-latch-equipped version of X-series elevators.

SLX Elevator

Auxiliary Elevators SJL and SPLSingle-joint, center-latch elevator designed to replace unsafe rope slings for hoisting collar-type pipe into position. The SJL type enables the crew to handle pipe properly, helps to avoid damage to pipe threads and reduces the chance of accident or injury. The SPL is the same as the SJL type except that the SPL is designed for use on tapered pipe.

DC Lift System

DC Lift Adapter Collar Type

150T for 3 1/2" EU & 3 1/2" IU103,

102 1 31189Y7

150T for 4 1/2" EU & 5" IEU 106 1 31189Y1

DC Lift Adapters 18° Type150T for 4" IU 121 1 31189Y9

150T for 4" EU & 4 1/2" IU, IEU 122 1 31189Y5

150T for 4 1/2" EU & 5" IEU 123 1 31189Y3

150T for 5 1/2" IEU 124 1 31189Y10

150T for 3 1/2" EU & 4 1/2" EU, 5" IEU 120, 123 1 31189Y12

150T for 6 5/8" IEU 655 1 31189Y15

Page 23: Casing Tools

Varco BJ

Elevators

181

Elevator Selection Chart

Elevator Selection

SizeType Frame

Nr.Cap.Tons

WeightIn mm Lb kg

Slip Type Elevators Y Series1.050-2 1/16

27-52 LYT 28750 20 57 26

1.315-2 7/8

33-73 MYT 29328Y 40 148 67

1.315-3 1/2

33-89 YT 55600Y 75 355 161

2 3/8-3 1/2

60-89 HYT 39284Y 150 750 336

3 1/2-7 89-178 YC 24140Y 75 445 206

3 1/2-7 89-178 MYC 200360Y 125 750 336

2 7/8-7 5/8 89-194 HYC BJ55310Y 200 997 452

2 7/8- 7 5/8

89 HYC AO BJ70166Y 200 1465 665

Collar Type Center Latch Elevators Series1.050-2 7/8

27-73 TA 32387Y 35 39 18

1.660-2 7/8

42-73 TA 32385Y 65 65 29

3 1/2-4 1/2

89-114 TA 32386Y 65 83 38

2 3/8-2 7/8

60-73 TA 32383Y 100 100 45

3 1/2-5 89-127 TA 32384Y 100 158 72

4 3/4-8 5/8

121-219 TA 200000Y 100 410 186

4 1/2-8 5/8

114-219 TA 32754Y 150 430 195

4 3/4-8 5/8

121-219 TA AO 35636Y 150 530 240

8 1/2-11 1/4

216-286 TA 39342Y 150 430 195

8 1/2-11 1/4

216-286 TA AO 39343Y 150 550 250

2 3/8-4 1/2

60-114 RGA 201360Y 200 162 73

3 1/2-7 102-178 GA 200034Y 350 555 252

3 1/2-7 102-178 GA AO 200035Y 350 725 330

7-7 5/8 178-194 GGA 201385Y 350 695 316

7-7 5/8 178-194 GGA AO 201380Y 350 998 454

18° Center Latch Elevator G Series

2 3/8-5 60-127 MG 30157Y 100 200 91

2 3/8-3 1/2

60-89 RGG 200680Y 150 308 140

3 1/2-5 1/2

89-140 MGG 35005Y 250 575 261

3 1/2-5 1/2

89-140 MGG AO 36056Y 250 720 327

4-5 1/2 102-140 GG 31068Y 350 715 324

4-5 1/2 102-140 GG AO 35143Y 350 1018 463

4-6 5/8 102-168 HGG 70013Y 500 1000 454

4-6 5/8 102-168 HGG AO 70222Y 500 1500 680

18° Center Latch Elevator G Series with wear bushing

3 1/2-5 1/2

89-140 MGG 200058Y 250 585 266

3 1/2-5 1/2

89-140 MGG AO 200057Y 250 730 332

4-5 1/2 102-140 GG 200056Y 350 725 329

4-5 1/2 102-140 GG AO 200024Y 350 1028 468

4 1/2-5 1/2

114-140 HGG 200060Y 500 1010 459

5-6 5/8 168 HGG 200062Y 500 1010 459

4 1/2-5 1/2

114-140 HGG AO 200059Y 500 1510 685

5-6 5/8 168 HGG AO 200061Y 500 1510 685

Bottleneck Center Latch Elevator

4-5 1/2 102-140 BNC 88425-50Y1 350 880 400

Elevator Selection (Continued)

SizeType Frame

Nr.Cap.Tons

WeightIn mm Lb kg

Page 24: Casing Tools

Varco BJ

Elevators

182

Elevator Selection — Continued

SizeType Frame

Nr.Cap.Tons

WeightIn mm Lb kg

COLLAR TYPE SIDE DOOR ELEVATORS X SERIES

1.660-2 7/8 42-73 SLX 33734Y 65 50 23

2 3/8-2 7/8 60-73 SLX 33693Y 100 75 34

3 1/2-4 89-102 SLX 33809Y 100 105 48

4 1/2-5 1/2 110-140 SLX 33854Y 100 175 79

5 1/2-8 5/8 140-219 SLX 31239Y 150 325 147

9 5/8-10 3/4

245-273 SLX 33950Y 150 420 191

11 3/4-13 3/8

298-340 SLX 33982Y 150 500 227

16 406 SLX 34087Y 150 575 261

18 5/8-20 473-508 SLX 33632Y 150 700 318

26-30 660-762 SLX DD 52755Y 150 1320 600

6 5/8-7 5/8 168-194 SSD 71273Y 250 600 273

8 5/8-10 3/4

219-273 SSD 71274Y 250 620 282

11 3/4-14 298-356 SDD 71275Y 250 635 289

18 5/8-20 473-508 SX 30598Y 250 1100 499

22-24 1/2 559-622 SLX 34175Y 250 1000 454

9 5/8-13 3/8

244-340 SX 29965Y 350 1200 544

9 5/8-13 3/8

244-340 SX 29964Y 500 1100 499

16 406 SX 30729Y 500 1200 544

AUXILIARY ELEVATORS S SERIES

2 3/8-3 1/2 60-89 SJL 70499Y 5 45 20

4-5 1/2 102-140 SJL 70500Y 5 51 23

6-7 5/8 152-194 SJL 70501Y 5 72 33

8 5/8-10 3/4

219-273 SJL 70502Y 5 98 44

11 3/4-13 3/8

298-340 SJL 70503Y 5 121 55

14 356 SJC 72782Y10 5 140 61

16-20 406-508 SJL 70504Y 5 210 95

21-24 1/2 533-622 SJL 70505Y 5 270 123

2 7/8-5 1/2 72-140 SPL 5° 200008Y 5 77 35

5 1/2-7 5/8 140-194 SPL 5° 200010Y 5 108 49

8 5/8-9 5/8 219-244 SPL 5° 200012Y 5 145 66

9 7/8 251 SPL 5° 200029Y 5 145 66

10 3/4 273 SPL 5° 200013Y 5 160 73

2 3/8-4 1/2 60-114 SPL 12° 200014Y 5 86 39

2 7/8-5 73-127 SPL 18° 200009Y 5 79 36

5 1/2-6 3/8 140-168 SPL 18° 200011Y 5 94 43

Elevator Selection — Continued

Tapered Inserts for SPL Elevators (6 req.)Size Type Tap. insert

27/8 SPL 5° 36184-278

31/2 SPL 5° 36184-312

4 SPL 5° 36184-400

41/2 SPL 5° 36184-412

5 SPL 5° 36184-500

51/2 SPL 5° 36284-512

65/8 SPL 5° 36248-658

7 SPL 5° 36248-700

75/8 SPL 5° 36248-758

85/8 SPL 5° 36186-858

95/8 SPL 5° 36186-958

103/4 SPL 5° 36187-107

23/8 SPL 12° 53614-238

27/8 SPL 12° 53614-278

31/2 SPL 12° 53614-312

4 SPL 12° 53614-400

4 1/2 SPL 12° 53614-412

2 7/8 SPL 18° 36185-278

31/2 SPL 18° 53185-312

5 SPL 18° 53185-500

51/2 SPL 18° 70253-512

6 5/8 SPL 18° 70253-658

S SERIES LIFING SLING

23/8-24 1/2 34568Y5

Elevator Selection — Continued

SizeType Frame

Nr.Cap.Tons

WeightIn mm Lb kg

Page 25: Casing Tools

Varco BJ

Elevators

183

Specifications Slips and Inserts Y-Series Elevators

Type Slip Insert no. QtyLYT

2 1/16 x 1.050 28745-7 29370 8

2 1/16 x 1.315 28745-2 28749 8

2 1/16 x 1.660 28745-3 28778 8

2 1/16 x 1.900 28745-4 28775 8

2 1/16 x 2.000 28745-5 28772 8

2 1/16 28745-6 28772 8

MYT

2 7/8 x 1.315 29343Y7 29259 8

2 7/8 x 1.660 29343Y6 29258 8

2 7/8 x 1.900 29343Y5 29257 8

2 7/8 x 2.000 29343Y4 29256 8

2 7/8 x 2 1/16 29343Y3 29256 8

2 7/8 x 2 3/8 29343Y2 29255 8

2 7/8 29343Y1 24773 8

YT

2 7/8 x 1.315 23108Y11 29259 12

2 7/8 x 1.660 23108Y10 29258 22

2 7/8 x 1.900 23108Y9 29257 12

2 7/8 x 2 23108Y8 29256 12

2 7/8 x 2 1/16 23108Y7 29256 12

2 7/8 x 2 3/8 23108Y6 29255 12

2 7/8 23108Y4 24773 12

3 1/2 x 2 7/8 23108Y3 30358 24

3 1/2 23108Y5 24774 24

HYT

2 7/8 x 2 3/8 39259Y4 29255 16

2 7/8 39259Y2 24773 16

3 1/2 x 2 7/8 39258Y4 30358 32

3 1/2 39258Y2 24774 32

Specifications Slips and Inserts Y-Series Elevators — Continued

Type Slip Assy. Insert No. Qty Bottom Guide

YC

4 1/2 x 3 1/2

34931Y 24779 16 26827-1

4 1/2 x 4 26830Y 24781 16 26827

4 1/2 24072Y5 16408 16 24071-4

5 1/2 x 5 24072Y7 24783 16 24071

5 1/2 24072Y2 16407 16 24071-1

7 x 6 5/8 24077Y7 24748 24 24071-3

7 24077Y1 16407 24 24071-2

HYC

2 7/8 201355Y 201356 24 201358

4 1/2 x 3 1/2

55509Y 24779 24 26827-1

4 1/2 x 4 55510Y 24781 24 26827

4 1/2 55511Y 16408 24 24071-4

5 1/2 x 5 55512Y 24783 36 24071

5 1/2 55513Y BJ16407 36 24071-1

7 x 6 5/8 55514Y 24748 48 24071-3

7 55515Y 16401 48 24071-2

7 5/8 70009Y 70010 48 24071-6

Page 26: Casing Tools

Varco BJ

Bore Charts

184

Bore Charts

How to Use the Bore ChartsIn ordering all collar-type and 18º type BJ elevators for drill pipe, casing and tubing, first determine correct pipe size and corresponding elevator frame part number from specification tables on these pages. Then determine correct bore code from the bore charts on the following pages. Add this number to the frame part number for the complete elevator.Note that the bore diagrams give bore diagrams for all BJ elevators other than BJ 18º elevators.

Drill Pipe Borecodes

Drill Pipe Size Type Upset Tool Joint Bore Code

18° Tap.Bore Code

Collar

2 3/8

IU API Reg. — 109

EU NC 26 (IF) 116 110

WO

OH

SL-H90

2 7/8

IU API Reg. 117 108

XH

EU NC 37 (IF) 118 101

WO

OH

SL-H90

3 1/2

IU API Reg. 119 102

API FH

EU NC 38 (IF) 120 103

WO

OH

SL-H90

4

IU NC 40 (FH) 121 104

H90

EU NC 46 (IF) 122 105

WO

OH

4 1/2

IU NC 46 (XH) 122(45)1

NOTES:1. Borecode BNC elevator.

105

IEU FH

H90

EU NC 50 (IF) 123(50)1 106

WO

OH

5

IEU NC 50 (XH) 123(50)1 106

4 1/2 (IF)

5 1/2 (FH)

5 1/2 IEU FH 124 (55)1 107

5 7/8IEU IF 678 —

IEU XT 789 —

6 5/8 IEU FH (8 3/4 TJ) 740 —

Page 27: Casing Tools

Varco BJ

Drill Pipe Bore Chart

Drill Pipe Bore Chart

Bores for special non-standardized drill pipe tooljoint combinations are available on request

Drill Pipe Bore Chart

Bore Code 116 117 118 119 120 121 122 123 124 678 789 740

Type 2 3/8 EU 2 7/8 IU 2 7/8 EU 3 1/2 IU 3 1/2 EU4 IU

4 1/2 IU, IEU

4 EU 5 IEU

4 1/2 EU (FH) 5 1/2 EU 5 7/8 IF XT 57 6 5/8 FH

Frno 30157 30157 30157 30157 30157 30157 30157 30157

MG A 4 1/4 4 3/4 4 3/4 5 1/2 5 1/2 6 1/2 6 3/4 7 1/8C 2 21/32 3 3/32 3 9/32 3 25/32 3 31/32 4 9/32 4 25/32 5 1/4D 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 5 1/4 5 1/4F 2 2 2 2 2 1 3/8 1 3/8 1 3/8G 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Frno 30156 30156 30156 30156 30156 23540 23540 23606 23606

RG A 4 1/4 4 3/4 4 3/4 5 1/2 5 1/2 6 1/2 6 3/4 7 1/8 7 7/8C 2 21/32 3 3/32 3 9/32 3 25/32 3 31/32 4 9/32 4 25/32 5 1/4 5 13/16

D 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 5 3/4 5 3/4 7 7

F 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/8 1 3/8 1 3/8 1 3/8G 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Frno 35005 35005 35005 35005 35005 35005

MGG A 5 1/2 5 1/2 6 1/2 6 3/4 7 1/8 7 7/8B 3 25/32 3 31/32 4 9/32 4 25/32 5 1/4 5 13/16

D 7 7 7 7 7 7

F 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2G 1 1 1 1 1 1

Frno 31068 31608 31608 31608

GG A 6 1/2 6 3/4 7 1/8 7 7/8C 4 9/32 4 25/32 5 1/4 5 13/16

D 7 7 7 7

F 1 3/8 2 3/8 2 3/8 2 3/8G 1/2 1/2 1/2 5/8

Frno 70013 70013 70013 70013 70013 70013 70013

HGG A 6 1/2 6 3/4 7 1/8 7 7/8 8 7 7/8 8 7/8C 4 9/32 4 25/32 5 1/4 5 13/16 6 17/64 6 1/8 7 1/32D 7 7 7 7 7 7 7

F 1 3/8 2 3/8 2 3/8 2 3/8 1 1 1

G 1/2 1/2 1/2 5/8 2 1/2 2 1/2 2 1/2

185

G Series elevators

B Series elevators
Page 28: Casing Tools

Varco BJ

Bore Chart

186

Bore Chart

Drill Collars with Zip Lift Recess Bore Chart

Drill Code OD Bore Code Top Bore A Bevel C Bottom

Bore B

4 1/8" 177 3 13/16" 1/16" 4 1/4"

4 3/4" 435 4 3/8" 1/16" 4 7/8"

5 1/4" 179 4 7/8" 1/16" 5 3/8"

5 1/2" 180 5 1/8" 1/16" 5 5/8"

5 3/4" 181 5 1/4" 1/16" 5 7/8"

6" 362 5 1/2" 1/16" 6 1/8"

6 1/4" 337 5 3/4" 1/16" 6 3/8"

6 1/2" 373 6" 1/16" 6 5/8"

6 3/4" 387 6 3/16" 3/32" 6 7/8"

7" 361 6 7/16" 3/32" 7 1/8"

7 1/4" 357 6 11/16" 3/32" 7 3/8"

7 1/2" 188 6 15/16" 3/32" 7 5/8"

7 3/4" 339 7 3/16" 3/32" 7 7/8"

8" 336 7 7/16" 3/32" 8 1/8"

8 1/4" 422 7 11/16" 3/32" 8 3/8"

8 1/2" 426 7 15/16" 3/32" 8 5/8"

9" 427 8 3/8" 1/8" 9 1/8"

9 1/2" 370 8 7/8" 1/8" 9 5/8"

9 3/4" 367 9 1/8" 1/8" 9 7/8"

10" 195 9 3/8" 1/8" 10 1/8"

10 3/4" 527 10 1/8" 1/8" 10 7/8"

11" 419 10 3/8" 1/8" 11 1/8"

11 1/4" 196 10 5/8" 1/8" 11 3/8"

Plain Drill Collars with Lift Plugs Bore Chart

Drill Code OD Bore Code Top Bore A Bevel C Bottom

Bore B

2 1/2" 201 2 21/32" 1/16" 2 21/32"

2 3/4" 203 2 29/32" 1/16" 2 29/32”

3" 205 3 5/32" 1/16" 3 5/32"

3 1/8" 206 3 9/32" 1/16" 3 9/32"

3 1/4" 207 3 13/32" 1/16" 3 13/32"

3 1/2” 209 3 21/32" 1/16" 3 21/32"

3 3/4" 211 3 29/32" 1/16" 3 29/32"

4v 213 4 5/32" 1/16" 4 5/32"

4 1/8" 519 4 9/32" 1/16" 4 9/32"

4 1/4" 548 4 13/32" 1/16" 4 13/32"

4 1/2" 215 4 21/32" 1/16" 4 21/32"

4 3/4" 354 4 15/32" 1/16" 4 15/32"

5" 552 5 3/16" 1/16" 5 3/16"

5 1/4" 219 5 7/16" 1/16" 5 7/16"

5 1/2" 411 5 11/16" 1/16" 5 11/16"

5 3/4" 222 5 31/32" 1/16" 5 31/32"

6" 349 6 7/32" 1/16" 6 7/32"

6 1/4" 348 6 15/32" 1/16" 6 15/32"

6 3/8" 331 6 19/32" 1/16" 6 19/32"

6 1/2" 135 6 23/32" 1/16" 6 23/32"

6 3/4" 338 7" 1/16" 7"

7" 372 7 1/4" 1/16" 7 1/4"

7 1/4" 335 7 1/2" 1/16" 7 1/2"

7 1/2" 137 7 3/4" 1/16" 7 3/4"

7" 550 8" 1/16" 8"

8" 334 8 1/4" 1/16" 8 1/4"

8 1/4" 347 8 1/2" 1/16" 8 1/2"

8 1/2" 580 8 25/32" 1/16" 8 25/32"

8 3/4" 226 9 1/32" 1/16" 9 1/32"

9" 356 9 9/32" 1/16" 9 9/32"

9 1/4" 227 9 17/32" 1/16" 9 17/32"

9 1/2" 346 9 25/32" 1/16" 9 25/32"

10" 228 10 11/32" 1/16" 10 11/32"

10 1/2" 229 10 27/32" 1/16" 10 27/32"

11" 230 11 11/32" 1/16" 11 11/32"

Page 29: Casing Tools

Varco BJ

Tubing, Collar Type Drill Pipe, Casing Bore Charts

187

Tubing, Collar Type Drill Pipe, Casing Bore Charts

Tubing Bore Chart

Tubing Size Style Bore Code Top Bore

ABottom Bore B

1.050" PlainUpset Tbg.

150151

1 5/32"1 13/32"

1 13/32"1 13/32"

1.315" PlainUpset Tbg.

152153

1 13/32"1 19/32"

1 19/32"1 19/32"

1.660" PlainUpset Tbg.

154155

1 3/4"1 29/32"

1 29/32"1 29/32"

1.900" PlainUpset Tbg.

156157

2"2 3/16"

2 3/16"2 3/16"

2 3/8"PlainUpset Tbg.

158159

2 15/32"2 23/32"

2 11/16"2 23/32"

2 7/8"PlainUpset Tbg.

160161

2 31/32"3 7/32"

3 3/16"3 7/32"

3 1/2"PlainUpset Tbg.

162163

3 19/32"3 27/32"

3 27/32"3 27/32"

4" PlainUpset Tbg.

164165

4 3/32"4 11/32"

4 11/32"4 11/32"

4 1/2"PlainUpset Tbg.

129167

4 19/32"4 27/32"

4 27/32"4 27/32"

Collar Type Drill Pipe Bore Chart

Bore Code Top Bore A Bottom Bore B

101 3 3/8" 3 1/8"

102 3 3/16" 3 3/4"

103 4 1/16" 3 3/4"

104 4 5/16" 4 1/4"

105 4 13/16" 4 3/4"

106 5 5/16" 5 1/4"

107 5 7/8" 5 13/16"

108 3 1/8" 3 1/8"

109 2 5/8" 2 5/8"

110 2 3/4" 2 3/4"

111 3 1/2" 3 1/2"

112 3 1/16" 3 1/16"

113 5 11/16" 5 11/16"

114 6 1/4" 6 1/4"

Casing Bore Chart

Casing Size Bore Code Top Bore A Bottom Bore B

4 1/2” 129 4 19/32” 4 27/32”4 3/4” 167 4 27/32” 4 27/32”

5” 131 5 3/32” 5 3/32”5 1/2” 132 5 5/8” 5 5/8”5 3/4” 133 5 7/8” 5 7/8”

6” 134 6 1/8” 6 1/8”6 5/8” 135 6 3/4” 6 3/4”

7” 136 7 1/8” 7 1/8”7 5/8” 137 7 3/4” 7 3/4”7 3/4” 705 7 7/8” 7 7/8”8 1/2” 646 8 21/32” 8 21/32”8 5/8” 139 8 25/32” 8 25/32”

9” 140 9 5/32” 9 5/32”9 5/8” 141 9 25/32” 9 25/32”9 7/8” 649 10 1/32” 10 1/32”10 3/4” 142 10 29/32” 10 29/32”11 3/4” 143 11 15/16” 11 15/16”11 7/8” 729 12 1/16” 12 1/16”12 3/4” 345 12 15/16” 12 15/16”13 3/8” 144 13 9/16” 13 9/16”13 5/8” 596 13 13/16” 13 13/16”

14” 690 14 13/64” 14 13/64”

16” 145 16 7/32” 16 7/32”

18” 723 18 1/4” 18 1/4”18 5/8” 146 18 7/8” 18 7/8”

20” 147 20 1/4” 20 1/4”21 1/2” 148 21 25/32” 21 25/32”

22” 688 22 9/32” 22 9/32”

24” 630 24 5/16” 24 5/16”24 1/2” 149 24 13/16” 24 13/16”

26” 650 26 11/32” 26 11/32”

28” 693 28 23/64” 28 23/64”

30” 644 30 3/8” 30 3/8”

Page 30: Casing Tools

Varco BJ

Flush Mounted Slip

188

Flush Mounted Slip

Flush Mounted Slip FMS 375, 500 Ton 14”The FMS 375, is mounted flush with the rig floor, allowing the casing connection height to be lowered to 1 meter (3 feet), eliminating the need for scaffolding. The rig crew also has more room to work by removing the spider body from the top of the rig floor. It is designed to fit into the opening of standard 37 1/2” & 49 1/2” (with adapter bushing) rotary tables. The unit requires a 2000 psi and 32 GPM hydraulic system for smooth, consistent and reliable operation. The slips utilize the full range of slip assemblies and guides, 4 1/2” to 14”, as used in the existing Varco SL type 500 ton elevator/spider. With top and bottom guides and the hydraulic power down feature for setting of the slip assemblies, the FMS 375 centers casing in the rotary, the slip power down feature allows the spider to take the torque reaction of the tong when the string weight only is not sufficient enough to resist rotating. The unit consists of two hinged body halves and top mounted lifting lugs, which allows the spider to be removed from the rotary table should this become necessary when the casing string is suspended from the elevator. The hydraulic connections and lubrication points are all located at the top of the spider, which allows quick hydraulic connection and easy maintenance while mounted in the rotary. A sturdy top cover allows roughnecks to work safely around the well bore during the casing job. Body Part number 200930-10

FMS 375, Flush Mounted Slip

Flush Mounted Slip FMS 375, 500 Ton 14”

Pipe SizeTop

Guide for Casing

Bottom Guide Casing

Slip Set with

InsertsInsert Set

5 1/2 x 4 1/2 18419-1 11787 13842Y3 2168-16B-32

5 1/2 x 5 18419-2 11788 13842Y2 2169-16B-32

5 1/2 18419-3 11789 13842Y1 2170-48

7 5/8 x 6 5/8 18419-4 11791 13841Y3 2632-24B-48

7 5/8 x 7 18419-4 11791 13841Y2 2623-24B-48

7 5/8 18419-5 11792 13841Y1 2633-72

9 5/8 x 8 5/8 18419-6 11793 13840Y3 2640-32B-64

9 5/8 18419-7 11794 13840Y1 2633-96

9 5/8 x 10 18419-15 11794 81268Y 2633-96

11 3/4 x 10 3/4 18419-8 11795 13839Y3 2640-40B-80

11 3/4 18419-9 11796 13839Y2 2637-120

11 3/4 x 12 18419-14 71229 71763Y1 2651-120

14 x 13 3/8 18419-10 71228 70734Y5 2636-40B-80

14 x 13 5/8 18419-12 11797 70734Y3 2653-40B-80

14 18419-11 15939 70734Y1 2635-120

Hydraulic Working

Pressure (PSI)Power Down Force

(Tons)Applied Maximum Back-up Torque

(Ft Lbs)2500 46 35000

2200 40 30800

2000 36 28000

1800 33 25200

1600 29 22400

1400 25 19600

1200 22 16800

1000 18 14000

FMS Adapter Plates

Brand P/NOilwell 200990-11

Emsco 200991-11

National 200995-11

Ideco 201430-1

Page 31: Casing Tools

Varco BJ

Casing Elevators/Spiders

189

Casing Elevators/Spiders

350 Ton Elevator/Spider 4 1/2” To 14”— Varco Type

P/N Description

11776 Elevator/Spider Less Slips and Guides 3900 lb (1769kg)

11798 Bell Guide Kit 400 lb (181kg)

19276 Spider Adapter Plate 700 lb (318kg)

11881 Airline and Filter assembly

Casing Size (In.)

Elevator Bottom Guide P/N

Spider Top

Guide P/N

Slip Set With

Inserts P/N

Insert Se1P/N

NOTES:1. Numbers followed by the letter “B” indicate beveled in-

serts (required at top and bottom of each slot).

Qty.

4 1/2 11787 V18419-1 11865 2168-16B-24 40

5 11788 V18419-2 11864 2169-16B-24 40

5 1/2 11789 V18419-3 11863 2170-40 40

6 5/8 11791 18419-4 11861 2632-24B-36 60

7 11791 18419-4 11860 2623-24B-36 60

7 5/8 11792 18419-5 11859 2633-60 60

7 3/4 11792 18419-5 71592-1 2649-60 60

8 5/8 11793 18419-6 11857 2640-32B-48 80

83/4 11793 18419-6 71591-3 2650-32B-48 80

9 5/8 11794 18419-7 11856 2633-80 80

9 3/4 71231 18419-15 71591-2 2649-80 80

9 7/8 71231 18419-15 71591-1 2649-80 80

10 3/4 11795 18419-8 11854 2640-40B-60 100

10 7/8 11795 18419-8 71590-1 2650-40B-60 100

11 3/4 11796 18419-9 11853 2637-100 100

11 7/8 11796 18419-9 71590-2 2651-100 100

13 3/8 11797 18419-10 70732-5 2636-40B-60 100

13 1/2 71228 18419-12 70732-4 2652-40B-60 100

13 5/8 71228 18419-12 70732-3 2653-40B-60 100

13 3/4 71228 18419-12 70732-2 2655-40B-60 100

14 15939 18419-11 70732-1 2635-100 100

500 Ton Elevator/Spider 4 1/2” To 14”— Varco Type

P/N Description13800Y Elevator/Spider Less Slips and Guides 5000 lb (2268 kg)

11798 Bell Guide Kit 400 lb (181 kg)

19276 Spider Adapter Plate 700 lb (318 kg)

11881 Airline and Filter assembly

Casing Size (in.)

Elevator Bottom Guide P/N

Spider Top

Guide P/N

Slip Set with

Inserts P/N

Insert Set1 P/N

NOTES:1. Numbers followed by the letter “B” indicate beveled in-

serts (required at top and bottom of each slot).

Qty.

4 1/2 11787 V18419-1 13842Y3 2168-16B-32 48

5 11788 V18419-2 13842Y2 2169-16B-32 48

5 1/2 11789 V18419-3 13842Y1 2170-48 48

6 5/8 11791 18419-4 13841Y3 2632-24B-48 72

7 11791 18419-4 13841Y2 2623-24B-48 72

7 5/8 11792 18419-5 13841Y1 2633-72 72

7 3/4 11792 18419-5 13841Y4 2649-72 72

8 5/8 11793 18419-6 13840Y3 2640-32B-64 96

8 3/4 11793 18419-5 13840Y5 2650-32B-64 96

9 5/8 11794 18419-7 13840Y1 2633-96 96

9 3/4 71231 18419-15 13840Y4 2649-96 96

9 7/8 71231 18419-15 13840Y2 2649-96 96

10 3/4 11795 18419-8 13839Y3 2640-40B-80 120

10 7/8 11795 18419-8 13839Y4 2650-40B-80 120

11 3/4 11796 18419-9 13839Y2 2637-120 120

11 7/8 11796 18419-9 13839Y1 2651-120 120

13 3/8 11797 18419-10 70734Y5 2636-40B-80 120

13 1/2 71228 18419-12 70734Y4 2652-40B-80 120

13 5/8 71228 18419-12 70734Y3 2653-40B-80 120

13 3/4 71228 18419-12 70734Y2 2655-40B-80 120

14 15939 18419-11 70734Y1 2635-120 120

Page 32: Casing Tools

Varco BJ

Casing Elevators/Spiders

190

500 Ton Elevator/Spider Varco Type

500 Ton Elevator/Spider 16” to 24 1/2”— Varco Type

P/N Description

15740Y Elevator/Spider Less Slips and Guides 10,500 lb (4763 kg)

19001 Bell Guide Kit 600 lb (272 kg)

16552 Spider Adapter Plate 2700 lb (1225 kg)

11881 Airline and Filter assembly

Casing Size (In.)

Elevator Bottom Guide P/N

Spider Top

Guide P/N

Slip Set With

Inserts P/N

Insert SetP/N Qty.

16 16184 73138 15790Y6 2636 180

18 15794-6 73139-6 15790Y4 2635-180 180

18 5/8 15794 73137 15790Y3 13868-4201

NOTES:1. Circular buttons used for 18 5/8” casing.

420

20 15793 73136 15790Y2 2635-180 180

22 50006055 50006074 15790Y5 2635-180 180

24 15792 73135 15790Y1 2635-180 180

24 1/2 74818 74817 15226Y1 2635 180

500 Ton Hydraulic Operated Elevator/Spider1, 2, 3

NOTES:1. Uses same size components as air operated version. 16”

slips made before May 2002 cannot be used in hydraulic Elevator/Spider.

2. Uses same controls of BX & PS3. Complete with pipe detectors and feedback signals

P/N

4 1/2" - 14"ElevatorElevatorSpider

50006046Y with auto setting system50006046Y2 without auto setting system50006046Y1

16" - 24 1/2"ElevatorElevatorSpider

50006047Y with auto setting system50006047Y2 without auto setting system50006047Y1

750 Ton Hydraulic Operated Elevator/Spider

P/N

4 1/2" - 14"ElevatorElevatorSpider

50006500Y with auto setting system50006500Y2 without auto setting system50006500Y1

16" - 24 1/2"ElevatorElevatorSpider

50006600Y with auto setting system50006600Y2 without auto setting system50006600Y1

Page 33: Casing Tools

Varco BJ

Casing Elevators/Spiders

191

Casing Elevators/Spiders

750 Ton Elevator/Spider VarcoType

750 Ton Elevator/Spider 6 5/8” To 14” — Varco Type

P/N Description

16150Y Elevator/Spider Less Slips and Guides 7500 lb (3402 kg)

19002 Bell Guide Kit 410 lb (188 kg)

17163 Spider Adapter Plate 1800 lb (816kg)

11881 Airline and Filter assembly

Casing Size (in.)

Elevator Bottom GuideP/N

Spider Top

Guide P/N

Slip Set with

Inserts P/N

Insert Set1P/N

NOTES:1. Numbers followed by the letter “B” indicate beveled in-

serts (required at top and bottom of each slot)

Qty

6 5/8 11791 18419-4 16182Y4 2632-24B-60 84

7 11791 18419-4 16182Y8 2623-24B-60 84

7 5/8 11792 18419-5 16182Y7 2633-84 84

7 3/4 11792 18419-5 16182Y21 2649-84 84

8 5/8 11793 18419-6 16182Y6 2640-32B-80 112

8 3/4 11793 18419-6 16182Y20 2650-32B-80 112

9 5/8 11794 18419-7 16182Y3 2633-112 112

9 3/4 71231 18419-15 16182Y19 2649-112 112

9 7/8 71231 18419-15 16182Y18 2649-112 112

10 3/4 11795 18419-8 16182Y5 2640-40B-100 140

10 7/8 11795 18419-8 16182Y17 2650-40B-100 140

11 3/4 11796 18419-9 16182Y2 2637-140 140

117/8 11796 18419-9 16182YY16 2651-140 140

13 3/8 11797 18419-10 16182Y10 2637-140 140

13 1/2 71228 18419-12 16182Y12 2652-40B-100 140

13 5/8 71228 18419-12 16182Y11 2653-40B-100 140

13 3/4 71228 18419-12 16182Y13 2655-40B-100 140

14 15939 18419-11 16182Y9 2635-140 140

750 Ton Elevator/Spider 16 ” To 24 1/2” — Varco Type

P/N Description

16180 Elevator/Spider Less Slips and Guides 12,000 lb (5443 kg)

19001 Bell Guide Kit 600 lb (272 kg)16552 Spider Adapter Plate 2700 lb (1225 kg)11881 Airline and Filter assembly

Casing Size (in.)

Elevator Bottom Guide P/N

Elevator Top

Guide P/N

Slip Set Inserts

P/N

Insert Set Inserts

P/NQty.

16 16184 73138 16181 2635-210 21018 5/8 15794 73137 16179 13868-5101

NOTES:1. Circular buttons used for 18 5/8” casing.

510

20 15793 73136 16178 2635-210 21024 15792 73135 16900 2635-210 210

1000 Ton Capacity 8 5/8” To 20” Varco Type

P/N Description

70100 Elevator/Spider Less Slips and Guides 19,025 lb (8629kg)

73886 Bell Guide Kit (5 5/8”-14”) 790 lbs (358 kg)70262 Bell Guide Kit (16”-20”) 340 lbs (154 kg)70819 Spider Adapter Plate 340 lb (154 kg)11881 Airline and Filter assembly

Casing Size (In.)

Elevator Bottom Guide P/N

Spider Top

Guide P/N

Slip Set With

Inserts P/N

Insert Set1P/N

NOTES:1. Numbers followed by the letter “B” indicate beveled in-

serts (required at top and bottom of each slot).

Qty.

8 5/8 11793 70102-7 70916 2640-24B-84 108

8 3/4 11793 70102-8 70916 2650-24B-84 108

9 5/8 11794 70102-1 70263 2633-108 108

9 3/4 71231 70102-9 74445 2649-108 108

9 7/8 71231 70102-9 74445 2649-108 108

10 3/4 11795 70102-2 70264 2640-36B-144 180

11 3/4 11796 70102-3 70265 2637-180 180

11 7/8 11795 70102-10 70265 2651-180 180

13 3/8 11797 70102-11 70906 2636-48B-192 240

13 1/2 71228 70102-12 75223 2652-48B-192 240

13 5/8 71228 70102-13 75223 2653-48B-192 240

13 3/4 71228 70102-18 75223 2655-48B-192 240

14 15939 70102-4 70266 2637-240 24016 70199 70102-5 70267 2637-300 300

18 5/8 70891 70102-14 70910 13868-7202

2. Circular buttons used for 18 5/8” casing.

720

20 70201 70102-6 70268 2635-300 300

Page 34: Casing Tools

Varco BJ

Casing Elevators/Spiders

192

Order as a Guide Plate Assembly, except when no body guide plate is required, then order door guide plate only.

250 Ton Elevator/Spider 2 3/8” to 7 5/8” BJ Type

P/N Description

50364 Body Assembly Complete less Slip & Guide Plate Assemblies (Manual Only)

31021 Guide Bell Assembly

50422-2 Upper Guard Assembly

31008 Spider Adapter Plates

API Pipe Size Guide Plate Slip Assembly

with Inserts

Inserts QtyIn. mm Assembly

11

NOTES:1. Guide Plate Assembly (Spider).

Assembly 22

2. Guide Plate Assembly (Elevator).

2 3/8 60.33 51925 51920 50378-9 24777 18

2 7/8 73.03 51925 51920 50378-5 25780 18

3 1/2 88.90 51925 51920 50378 16441 18

3 1/2 88.90 51926 51921 50375-8 24779 27

4 101.60 51926 51921 50375-4 24781 27

4 1/2 114.30 51926 51921 50375 16408 27

4 1/2 114.30 51927 51922 50372-8 24785 27

5 127.00 51927 51922 50372-4 24783 27

5 1/2 139.70 51927 51922 50372 16407 27

6 5/8 168.28 51928 51924 50369-8 25474 45

7 177.80 51928 51924 50369-5 26750 45

7 5/8 193.68 51928 51924 50369 16407 45

350 Ton Elevator/Spider BJ Type

350 Ton Elevator/Spider 4 1/2” to 13 3/8” — BJ Type

P/N Description Weight 3050 lb (Man.) 3500 lb (Air)

33492 Body Assy. Complete Less Slip,Guide Plate & Air Supply Hose Assemblies (Air)

34301 Body Assembly Complete Less Slip & Guide Plate Assemblies (Manual)

28599 Casing Guide Bell Assembly 28570-1 Upper Guard Assembly27000 Spider Adapter Plate 27 1/2” RT31100 Spider Adapter Plate 37 1/2” RT (except EMSCO)32698 Spider Adapter Plate 37 1/2” RT EMSCO

Api Pipe Size Spider Guide Plate Assy.

Elevator Guide Plate Assy.

Slip Assy. With

InsertsInserts Qty.

in. mm

4 1/2 114.30 51949 51936 28556-8 24785 36

5 127.00 51950 51936 28556-4 24783 365 1/2 139.70 51950 51936 28556 16407 36

5 3/4 146.05 51951 51937-1 28551-10 29254 48

6 152.40 51951 51937-1 28551-8 24785 486 5/8 168.28 51952 51937 28551-3 24748 48

6 5/8 168.28 51952 51937 28546-8 25474 60

7 177.80 51952 51937 28551 16407 487 177.80 51952 51937 28546-5 26750 60

7 5/8 193.68 51953 51938 28546 16407 60

7 5/8 193.68 51953 51938 28541-8 25474 60

8 5/8 219.08 51954 51939 28541 15660 72

8 5/8 219.08 51954 51939 28536-8 25474 72

9 5/8 244.48 51955 51940 28536 15660 72

9 5/8 244.48 51955 51940 28531-11 33249 72

10 3/4 273.05 51956 51941 28531 15660 72

10 3/4 273.05 51956 51941 28526-8 25474 72

11 3/4 298.45 51957 51942 28526 15660 72

12 3/4 323.85 51958 28571 28521-5 32700 84

13 3/8 339.73 51958 28571 28521 15660 84

Page 35: Casing Tools

Varco BJ

Casing Elevators/Spiders

193

500 Ton Elevator/Spider 4 1/2” to 13 3/8” — BJ Type

P/N Description Weight 4900 lb (Man.) 4990 lb (Air)

32664-1 Body Assembly Complete Less Slip, Guide Plate & Air Supply Hose Assemblies (Air)

32664 Body Assembly Complete Less Slip & Guide Plate Assemblies (Manual)

28599 Casing Guide Bell Assembly

32683-1 Upper Guard Assembly

27000 Spider Adapter Plate 27 1/2” RT

31100 Spider Adapter Plate 37 1/2” RT (except EMSCO)

32698 Spider Adapter Plate 37 1/2” RT EMSCO

API pipe size Spider Guide Plate Assy.

Elevator Guide Plate Assy.

Slip Assy. with

InsertsInserts Qty.

in mm

4 1/2 114.30 51949 51936 52551-8 24785 45

5 127.00 51950 51936 52551-4 24783 45

5 1/2 139.70 51950 51936 52551 16407 45

6 5/8 168.28 51952 51937 52552-8 25474 75

7 177.80 51952 51937 52552-5 26750 75

7 5/8 193.68 51953 51938 52552 16407 75

8 5/8 219.08 51954 51939 52553-8 25474 90

9 5/8 244.48 51955 51940 52553 15660 90

10 3/4 273.06 51956 51941 52554-8 25474 105

11 3/4 298.45 51957 51942 52554 15660 105

12 3/4 323.85 51958 28571 52555-5 32700 135

13 3/8 339.73 51958 28571 52555 15660 135

500 Ton Elevator/Spider BJ Type

500 Ton Elevator/Spider 12 3/4” 24 1/2” — BJ Type

P/N Description Weight 6869 lb (Man.) 6980 lb (Air)

51729 Body Assembly Complete Less Slip & Guide Plate Assemblies (Air)

51729-1 Body Assembly Complete Less Slip & Guide Plate Assemblies (Manual)

51725 Casing Guide Bell

51797 Upper Guard Assembly

51772 Spider Adapter Plate 37 1/2” RT

API pipe size Spider Guide Plate Assy.

Elevator Guide Plate Assy.

Slip Assy. with

InsertsInserts Qty.

in mm

12 3/4 323.85 51977 51968 52531-10 39290 135

13 3/8 339.73 51976 51967 52531-5 32700 135

13 5/8 346.08 51976 51967 52531-3 39287 135

14 355.60 51975 51966 52531 15660 135

16 406.40 51974 51965 52532 51223 165

18 5/8 473.08 51973 51964 52533-11 32561 195

20 508.00 51972 51962 52533 32186 195

22 558.80 51971 51961 52534 51222 225

24 609.60 51970 51960 52535 51221 225

24 1/2 622.30 51969 51235 52536 51790 225

Page 36: Casing Tools

Varco BJ

Casing Elevators/Spiders

194

1000 Ton Elevator/Spider 7 5/8” 14” — BJ Type

P/N Description Weight 7000 lb (Air)

38777 Body Assembly Complete Less Slip & Guide Plate Assemblies (Air)

38795 Casing Guide Bell Assembly

39041 Upper Guard Assembly

27000 Spider Adapter Plate 27 1/2” RT

31100 Spider Adapter Plate 37 1/2” RT (except EMSCO)

32698 Spider Adapter Plate 37 1/2” RT EMSCO

API pipe size Spider Guide Plate Assy.

Elevator Guide Plate Assy.

Slip Assy. with

Inserts

In-serts Qty.

in. mm

7 5/8 193.68 51953 51943 38764-10 39290 108

8 5/8 219.08 51954 51944 38764-2 39286 108

9 5/8 244.48 51955 51945 38763-10 39290 126

10 3/4 273.05 51956 51946 38763-1 39285 126

11 3/4 298.45 51957 51947 38762-6 39289 144

12 3/4 323.85 51958 51948 38761-10 39290 162

13 3/8 339.73 51959 38788 38761-5 32700 162

14 355.60 51959 38788 38761 15660 162

Air Supply Hose Assembly

350 Ton 500 Ton 500 Ton

1000 Ton13 3/8” 24”

Elevator 52384 52384 52383 52383

Spider 23602 23602 52382 52382

Page 37: Casing Tools

Varco BJ

CU, CUL & CB Casing Bushings

195

CU, CUL & CB Casing Bushings

DescriptionCU, CUL and CB Casing Bushings are inserted directly into the rotary table and insure that the casing being run is perfectly aligned with the center of the hole. Models CU and CUL are solid bushings and Model CB is a split bushing. All of the bushings accept bowls of different sizes to accommodate a wide range of casing. Using CMS-XL or CP-S slips, since these bushings fit into the rotary table, the casing string can be easily rotated during cementing operations.

CU, CUL & CB Casing Bushing

Rotary Table Size (in.)

Make Casing Size (in.)

Casing Bushing &

Insert Bowl(P/N)

Weight lbs. (kg)

17 1/2 -20 1/2

ALL11 3/4 & 13 3/8 CU (3102) 470 (213)

9 5/8 & 10¾ W/bowl No. 2 (1902) 342 (155)

26 &27 1/2

ALL

18 5/8 & 20 CUL(3103) 938 (425.5)

16W/bowl 20x16 (3104)

562 (255)

11 3/4 & 13 3/8W/bowl No.

1 (3105) 846 (384)

9 5/8 & 10 ¾ W/bowl No. 2 (1902) 342 (155)

2 3/8 & 8 5/8W/bowl No.

3 (1809) 464 (210.5)

27 1/2ALL

27 1/2API

18 5/8 & 20 CB (6695) 713 (323)

16 W/bowl 20 x 16 (6127) 572 (259)

11 3/4 & 13 3/8 W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 ¾ W/bowl No. 2 (6114) 252 (114)

37 1/2 -49 1/2

NATIONAL

30 CB (V11763) 1100 (499)

26 CB (16454) 1100 (499)

24 CB (11253) 1200 (544)

23 CB (11252) 1200 (544)

18 5/8 & 20 CB (10187) 1600 (726)

16 W/bowl 20 x 16 (6127) 572 (259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 ¾ W/bowl No. 2 (6114) 252 (114)

CU Casing Bushing

CUL Casing Bushing

Page 38: Casing Tools

Varco BJ

CU, CUL & CB Casing Bushings

196

CU, CUL & CB Casing Bushing

Rotary Table Size (in.)

Make Casing Size (in.)

Casing Bushing &

Insert Bowl (P/N)

Weight lbs. (kg)

37 1/2 -49 1/2

EMSCO

30 CB (11633) 1160 (526)

26 CB (89183-1) 1100 (500)

24 CB (16542) 1260 (571.5)

22 CB(11252-22) 1120 (509)

18 5/8 & 20

CB (11553) S/N 49 & above for 37 1/2 only

1610 (730)

(10190) S/N 48 & be-low for 37

1/2 only

1820 (825.5)

16 W/bowl 20 x16 (6127) 572 9259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 3/4W/bowl No.

2 (6114) 252 (114)

37 1/2 - 49 1/2

OILWELL

30 CB (12093) 1170 (531)

26 CB (6170-26) 1100 (500)

24 CB (6170) 1260 (571.5)

18 5/8 & 20 CB (10188) 1670 (759)

16W/bowl 20x16 (6127)

572 (259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 3/4W/bowl No.

2 (6114) 252 (114)

37 1/2 IDECO

30 CB (12092) 1100 (499)

26 CB(74814-26) 1452 (605)

24 1/2 CB (74814) 1560 (650)

20 5/8 & 20 CB ( 10189) 1670 (757.5)

16 W/bowl 20 x16 (6127) 572 259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

CB Casing Bushing

Page 39: Casing Tools

Varco BJ

Casing Spiders and Slips

197

Casing Spiders and Slips

Casing SpidersThe Baash-Ross 200 ton Hinged Casing Spider will fit most casing handling operations. It can be placed on the rotary table, mounted on a platform which replaces the rotary table, or supported by cribbing, depending upon the auxiliary equipment and procedure to be followed.

Baash-Ross 200 Ton Hinged Casing Spider

UC-3 Casing SlipsMost casing strings’ weight and the relatively thin pipe wall make it important that the supporting slips provide full circumferential grip. The BAASS-ROSS Type UC-3 slips achieves this with many norrow segments. They are hinged together to wrap around the casing and exert a more uniform pressure. With each segment carrying the same load, they automtically center the casing string within the bushing or spider. The UC-3 has a 3” taper. With changes in the number of segments and liners, it will handle strings from 16” OD to 42” OD. Liners are held in place by a liner Retainer Key and Cotter Pin.

UC-3 Casing Slips

Page 40: Casing Tools

198

Varco BJ

Casing Spiders and Slips

200 Ton Hinged Casing Spiders

Csg.Size UC-3 Slip No. Wt. lb 30” Spider

7704-A-161 Wt. lb 1200 36” Spider 7704-A-167

Wt. lb 1100

42” Spider 7704-A-179

Wt. lb 1525

16 7704-5036 151

Bushing

9757704-A-165

Retainers

900054-740

18 5/8" 7704-5035 143

Bushing

900

Bushing

11357704-A-164 7704-A-172

Retainers Retainers

900042-706 900054-560

20 7704-5034 283

Bushing

900

Bushing

11357704-A-164 7704-A-172

Retainers Retainers

900042-706 900054-560

22 1/2 7704-5002 359

Bushing

750

Bushing

9247704-A-163 7704-A-171

Retainers Retainers

939097-156 900041-441

24 7704-5001 312

Bushing

750

Bushing

9247704-A-163 7704-A-171

Retainers Retainers

939097-156 900041-441

26 7704-5006 325

Bushing7704-A-162Retainers

939097-106

605

Bushing

8177704-A-170

Retainers

900042-186

30 7704-5005 367

Use 30”Spider

Bushing

640

Bushing

14007704-A-169 7704-A-180

Retainers Retainers

939097-136 900042-708

33 7704-5008 410

Bushing

5007704-A-168

Retainers

939097-76

36 7704-5007 437

Use 36” Bushing

1226

Spider 7704-A-178

Retainers

939097-156

42 7704-5019 495Use 42”

Spider

Page 41: Casing Tools

Varco BJ

Roller Kelly Bushing

199

Roller Kelly Bushing

27 XHDP Roller Kelly BushingFor extreme high-torque drilling. Essentially two HDP bushings combined into one unit, this tool reduces wear to kelly and itself through wider force distribution. For master bushings with 25 ¾” pin circle. Unit comes with wrench, wiper and wear gauge. Weight 2850 lbs.

XHDP Roller Kelly Bushing

HDP Roller Kelly BushingWidely recognized as the standard of the industry. For master bushings with 25 ¾” pin circle 27 HDP or 23” pin circle 20 HDP. Unit comes with wrench, wiper and wear gauge. Weight 1500 lbs.

27” HDP Roller Kelly Bushing

MDP Roller Kelly BushingAll the advantages of the HDP is for medium or smaller rigs with 17 ½” or 20 ½” rotary tables. Unit comes with wrench, wiper and wear gauge. For Master Bushings with 23" pin circle 20 MDP or 19" pin circle 17 MDP. Weight 750 lbs.

HDS Roller Kelly BushingFor heavy duty square drive applications. Components are interchangeable with HDP. Unit comes with wrench, wiper and wear gauge. Weight 1420 lbs.

HDS Roller Kelly Bushing

MDS Roller Kelly BushingFor medium duty square drive applications. Component parts are interchangeable with MDP. Unit comes with wrench, wiper and wear gauge. Weight 800 lbs.

Optional Lock AssemblyLocks for the Kelly Bushing in the Master Bushing for use offshore with motion compensators. Lock assembly may be ordered installed in 27-HDP only. To specify, add an “L” to basic part number of unit. Lock Assembly alone PN 3695.

Kelly Wiper

Kelly Size

(inches)

HDP, HDS Square Hex

P/N Wt Lb P/N Wt Lb

3 API 8-0260 4 8-0320 4

3 1/2 API 8-0265 4 8-0285 4

4 1/4 API 8-0170 3 3/4 8-0275 3 3/4

5 1/2 API 8-0300 3 8-0305 3

6 API 8-0200 3 8-0240 3

Page 42: Casing Tools

200

Varco BJ

Roller Kelly Bushing

Kelly Bushing Safety GuardFits Rotary Tables with HDP-HDS kelly Bushings.

■ For 17 ½” - 27 ½” Rotary Table P/N 15794■ For 37 ½” Rotary Table P/N 16951■ For 49 ½” Rotary Table P/N 16953

Optional Lock Assembly

Kelly Size 27 HDPP/N

20 HDPP/N

27 XHDPP/N

MDSP/N

HDSP/N

MDPP/N

17 1/2 MDPP/N

3 Hex 3650-30 3690-30 — 70484-H30 3635-30 70487-H30 70477-H30

3 3/4 Hex 3650-35 3690-35 — 70484-H35 3635-35 70487-H35 70477-H35

4 1/4 Hex 3650-42 3690-42 70947-1 70484-H42 3635-42 70487-H42 70477-H42

5 Spec. Hex 3650-50 3690-50 — — 3635-50 — —

5 1/4 Hex 3650-52 3690-52 — — 3635-52 — —

6 Hex 3650-60 3690-60 70947-2 — 3635-60 — —

2 3/4 Sq — — — 70484-S25 — 70487-S25 70477-S25

3 Sq 3651-30 3691-30 — 70484-S30 3636-30 70487-S30 70477-S30

3 3/4 Sq 3651-35 3691-35 — 70484-S35 3636-35 70487-S35 70477-S35

4 1/4 Sq 3651-42 3691-42 — 70484-S42 3636-42 70487-S42 70477-S42

5 1/4 Sq 3651-52 3691-52 70947-3 — 3636-52 — —

6 Sq 3651-60 3691-60 70947-4 — 3636-60 — —

Less Rollers 3653 3692 70947-BD 70483 3637 70486 70476

Roller Assemblies Complete

Kelly Size/Type (inches)HDP & HDS1

NOTES:1. Sleeve bearings are standard, for roller bearings add R at end of P/N

MDP & MDSP/N Wt Lb P/N Wt Lb

2 1/2 Sq — — 70474-4 192

3 Sq 3660 590 70474-5 176

3 1/2 Sq 3661 562 70474-6 160

4 1/4 Sq 3662 512 70474-7 132

5 1/4 Sq 3665 438 — —

6 Sq 3666 374 — —

3 Hex 3667 612 70474-1 162

3 1/2 Hex 3668 584 70474-2 146

4 1/4 Hex 3669 532 70474-3 126

4 1/2 Hex 3670 509 — —

5 Sp Hex 3671 486 — —

5 1/4 Hex 3672 476 — —

6 Hex 3673 414 — —

Page 43: Casing Tools

Varco BJ

Master Bushings

201

Master Bushings

Master Bushing Selection Chart

Make SizeMPCH MSPC MSP/MDSP MSS

Comp Body Only Comp Body Only Comp Body Only Comp Body Only

API Standard

17 1/2 — — — — 70527-1 70526-1 1001-1 1006-1

20 1/2 — — 1801-1 1805-1 70540-1 70539-1 1002-1 1007-1

27 1/2 — — 1804-1 1808-1 — 5429-1 1005-1 1010-1

Continental Emsco

L-17 — — — — 70527-5 70526-5 1001-9 1006-9T-1750 — — — — 70527-1 70526-1 1001-1 1006-1

O-17 1/2, P-17 1/2 — — — — 70527-6 70526-6 1001-4 1006-4

T-2050 — — 1801-1 1805-1 70540-4 70539-4 1002-1 1007-10-20 1/2 P, PJ, J, JA, JC, JAC, JACS, JAS,

JCS, JS— — 1801-3 1805-3 70540-5 70539-5 1002-3 1007-3

JAB-20 1/2, JABS, JB, JBS

— — — — 70540-6 70539-6 1002-5 1007-5

T-2750 — — 1804-1 1808-1 5429-1 — 1005-1 1010-1G-27 1/2 — — 1804-5 1808-5 5429-5 — 1005-5 1010-5

H-27 1/2 — — 1804-2 1808-2 5429-2 — 1005-2 1010-2

K-27 1/2, KS, PJ — — 1804-3 1808-3 5429-3 — 1005-3 1010-3

T-3750 (S/N 1-48) 6600-2A 6601-2A — — — — — —T-3750/T-4950

(S/N 49/UP) 6600-2 6601-2 — — — — — —

Gardner- Denver

RT- 17 1/2 — — — — 70527-1 70526-1 1001-1 1006-1

RT- 27 1/2 — — 1804-1 1808-1 5429-1 — 1005-1 1010-1

RT- 37 1/2 6600-7 6601-7 — — — — — —

Ideco

17 1/4 — — — — 70527-7 70526-7 1001-5 1006-5

17 1/2, HS-175 — — — — 70527-8 70526-8 1001-5 1006-5

20 1/2 — — 1801-1 1805-1 70540-1 70539-1 1002-1 1007-1

27 1/2, HS-275 — — 1804-7 1808-7 5429-7 — 1005-7 1010-7

37 1/2 6600-4 6601-4 — — — — — —

National

A & B-175, 17 1/2 — — 70527-9 70526-9 1001-1 1006-1

A-205, 20 1/2 — — 1801-1 1805-1 70540-4 70539-4 1002-1 1007-1

MS-27 1/2, A&B- 27 1/2 — — 1804-5 1808-5 5429-5 — 1005-5 1010-5

C-375 6600-1 6601-1 — — — — — —

Oilwell

A-17 1/2 — — — — 70527-10 70526-10 1001-1 1006-1

17 1/2 — — — — 70527-11 70526-11 1001-3 1006-3

20 1/2 — — 1801-3 1805-3 70540-7 70539-7 1002-3 1007-3

A-20 1/2 — — 1801-1 1805-1 70540-4 70539-4 1002-1 1007-1

27 1/2, 27 1/2A — — 1804-9 1808-9 — — 1005-8 1010-8

A-27 1/2 — — 1804-1 1808-1 5429-1 — 1005-1 1010-1

A-37 1/2 6600-3 6601-3 — — — — — —

Wirth27 1/2 — — 1804-1 1808-1 5429-1 — 1005-1 1010-1

37 1/2 6600-3 6601-3 — — — — — —

Page 44: Casing Tools

Varco BJ

Master Bushings

202

MPCH Master BushingDescriptionThe 37 ½” MPCH is a Pin Drive Hinged Master Bushing specially designed for floating and semi-submersible drilling operations. With insert bowl No. 3 and optional insert bowls No. 1 and No. 2, the MPCH will handle tubulars from 2 3/8” to 13 3/8” OD.Unit comes complete with No. 3 insert bowl, bit breaker adapter plate and lifting sling. Weight complete 4200 lbs (1905 kg); body only 3200 lbs (1452 kg).

2 way lifting sling part no. 10214 way lifting sling part no. 6699

MPCH Master Bushing

P/N Weight Lbs Kg

Insert Bowl No. 113 3/8" to 11 3/4"

6610 336 152

Insert Bowl No. 210 3/4" to 9 5/8"

6609 470 213

Insert Bowl No. 3API 8 5/8" and smaller 6608 625 283

MPCH

MPCH with # 3 bowl & SDXL slips

Page 45: Casing Tools

Varco BJ

Master Bushings

MSPC Master Bushing 20 ½” through 27 ½”DescriptionThe 20 ½” thru 27 ½” MSPC is a solid Body Pin Drive Master Bushing designed for all drilling operations. The pin drive allows the kelly bushing to ride on top of the rotary table and permits extended bowls to be used for better slip back up. With the extended API insert bowl No. 3, the MSPC will handle tubulars from 2 3/8” to 13 3/8”. Unit comes with No. 3 insert bowl, bit breaker adapter plate and lifting sling.

Weight lbs (kg):■ 20 ½” & 21 complete, 1210 (549); body only

570 (259)■ 23 complete 1490 (676); body only 646

(293)■ 25-27 ½ complete 1965 (891); body only

1110 (503)

MSPC

203

For Rotary Table Size MSPC

For Rotary Table Size MSPC (in.)

20 1/2 & 21 23 27 1/2

P/N Weight

PartWeight

PartWeight

Description Lbs (kg) No. Lbs (kg) No. Lbs (kg)

Insert Bowl No.1 13 3/8" & 11 3/4 — — 1903 326 (148) 1903 326 (148)

Insert Bowl No.2 10 3/4” & 9 5/8" 1902 242 (110) 1904 460 (209) 1904 460 (209)

Insert Bowl No.3 API 8 5/8” & smaller 1809 464 (210) 1810 620 (281) 1810 620 (281)

Page 46: Casing Tools

Varco BJ

Master Bushings

204

Master Bushings

MDSP Master Bushing 17 ½” & 20 ½”Description17 ½ and 20 ½ Medium Duty Pin Drive Split Master Bushing are designed for shallow to medium depth service.Extended API TaperThe MDSP Master Bushings have an extended APT taper in the bowls that provides 50 % more slip support than do square drive bushings. Varco SDML slips, used in the MDSP master bushing are a proven combination that can handle drilling to 15,000 feet.Note : Varco BJ does not recommend using split master bushings in rotary tables with more than 3/16” (5 mm) wear in the rotary table bore. Rebuild rotary bore or purchase a solid type bushing.Units come complete with bit breaker adapter plate and lifting sling.Weight lbs (kg) :

■ 17 ½” complete, 737 (334); body only 577 (262)

■ 20 ½” complete, 1100 (499); body only 924 (419)

MDSP

MSP 27 ½” Split Pin Drive BushingsDescriptionMSP 27 ½ Split Pin Drive bushings are also available. With the larger rotary opening the standard No. 3 Extended API taper is used. This allows the use of extra-long SDXL slips required for heavier loads. Weight 1600 lbs (726 kg).

Page 47: Casing Tools

Varco BJ

Master Bushings

Master Casing Bushing (MSS)17 1/2 thru 27 1/2 Solid Body Square Drive Master Casing Bushing (MSS) is designed for all drilling operations. A 4 inch deep recess accommodates a square drive kelly bushing to sit within the master bushing. Developed for use when a 10,000 foot well was considered deep, the MSS still serves a useful purpose where a large slip backup area is not required. With the extended API insert bowl No. 3, the MSS will handle 2 3/8 thru 8 5/8 inch OD drill pipe, drill collars, tubing, and casing. Insert bowl No. 2 can handle tubular goods 9 5/8 and 10 3/4 inches OD. The MSS design, with its solid body, retains the correct API taper for medium and short rotary slips (Varco’s SDML and SDS) under all load conditions. These slips receive correct backup and hold tubulars uniformly. The solid outer body takes all transverse loads and provides proper backing for the split insert bowls allowing the rotary table to rotate freely, unimpaired by transverse loads.

Unit comes complete with No. 3 insert bowl and lifting sling. Weight lbs (kg):

■ 17 ½ complete, 695 (315); body only, 429 (195)

■ 20 ½ complete,1108 (503); body only, 842 (382)

■ 23 complete, 1390 (630); body only, 1142 (518)

■ 26 complete, 1740 (789); body only, 780 (354)

■ 27 ½ complete, 1970 (893); body only, 1010 (458)

205

MSS Parts List For Rotary Table Size (In.)

Description17 1/2 20 1/2 & 21 22 & 23 27 1/2 1

NOTES:1. No Bowl Lock is used in this bushing.

P/N Wt.Lbs (kg) P/N Wt.

Lbs (kg) P/N Wt.Lbs (kg) P/N Wt.

Lbs (kg)

Insert Bowl No. 2 10 3/4 & 9 5/8 in. — — — — — — 1026 950 (431)

Insert Bowl No. 32 Extended API for 8 5/8 in. & smaller

2. Special API extended insert bowl for tripping only.

1024 275 (125) 1024 275 (125) 1024 275 (125) 1025 980 (445)

Insert Bowl No. 3 Regular API for 8 5/8 in. & smaller 1011 226 (103) 1011 226 (103) 1011 226 (103) 1022 920 (417)

Page 48: Casing Tools

Varco BJ

Rotary Slips

206

Rotary Slips

SDS, SDML and SDXL Rotary SlipsDescriptionSDS, SDML and SDXL Rotary Slips are for use in API standard insert bowls. Featuring better contact and distribution of load on drill pipe thru a superior wraparound configuration and unique insert design, these slips prevent bottlenecking and gouging damage. The buttress design of the body segments provides great strength while minimizing weight for ease of handling.Insert Contact LengthSDS 11”SDML 13 3/4”

SDXL 16 1/2”

Rotary Slips Complete

Slip Size (in.)

API Pipe Sizes

OD (in.)

SDS P/N

SDMLP/N

SDXLP/N

SDHL 750 ton P/N

3 1/2

2 3/8 3901 15524 — —

2 7/8 3903 15523 — —3 1/2 3905 15522 — —

4 1/2

3 1/2 3907 15563 V15515 —4 3909 15564 15514 —

4 ½ 3911 15565 V15513 —

54 — 15567 15518 —

4 1/2 — 15568 15517 —5 — 15569 V15516 —

5 1/2

4 1/2 — 15571 15521 50006021-450

5 — 15572 15520 50006021-500

5 ½ — 15573 V15519 50006021-550

6 7/8

5 5/8 — — — 50006040-563

5 7/8 — — — 50006040-588

6 7/8 — — — 50006040-663

6 7/8 — — — 50006040-688

76 5/8 — — 86720 —

7 — — 86719 —

SDXL Slip

SDXL Rotary Slip

Page 49: Casing Tools

Varco BJ

Rotary Slips

207

SDS Short Rotary Slips

Slip Body Size (in.) 3 1/2 4 1/2

Pipe Size (in.) 2 3/8 2 7/8 3 1/2 3 1/2 4 4 1/2P/N Slip w/

inserts 3901 3903 3905 3907 3909 3911

Wt Slip with insert lbs (kg) 134 (61) 128 (58) 124 (56) 162 (73) 155 (70) 146 (66)

P/N 2160-24 2161-24 2162-24 2163-36 2164-36 2165-36

Insert SetWt-lbs (kg) 21 (9.5) 16 (7) 10 (4.5) 32 (14.5) 25 (11) 16 (7)

Qty 24 24 24 36 36 36

SDML Medium Rotary Slips

Slip Body Size (in.) 3 1/2 4 1/2 5 5 1/2

Pipe Sizes (in.) 2 3/8 2 7/8 3 1/2 3 1/2 4 41/2 4 4 1/2 5 4 1/2 5 5 1/2P/N Slip with

inserts 15524 15523 15522 15563 15564 15565 15567 15568 15569 15571 15572 15573

Wt : Slip withinserts lbs (kg)

193(87.5)

188(85)

180(81.50)

207(94)

199(90)

188(85)

204(92.5)

196(89)

185(84)

200(91)

192(87)

181(82)

Insert set:P/N 2160-30 2161-30 2162-30 2163-45 2164-45 2165-45 2168-45 2166-45 2167-45 2168-45 2169-45 2170-45

Wt-lbs (kg) 26 (12) 21(9.5) 13 (6) 39 (17.5) 31 (14) 20 (9) 39

(17.5)31

(14)20(9)

39(17.5) 31 (14) 20 (9)

Qty 30 30 30 45 45 45 45 45 45 45 45 45

SDXL Long Rotary Slips

Slip Body Size (in.) 4 1/2 5 5 1/2 7

Pipe Sizes (in.) 3 1/2 4 4 1/2 4 4 1/2 5 4 1/2 5 5 1/2 5 7/8 6 5/8 7

P/N Slip withinserts V15515 15514 V15513 15518 15517 V15516 15521 15520 V15519 86722-1 86720 86719

Wt : Slip withinserts lbs (kg)

229 (104)

219(99) 205 (93) 237

(107.5)227

(103)213

(96.5)234

(106)224

(101.5)210(95)

250(114)

242(110)

232 (105)

Insert set:P/N 2163-54 2164-54 2165-54 2168-54 2166-54 2167-54 2168-54 2169-54 2170-54 2656-60 2172-60 2173-60

Wt-lbs (kg) 47(21)

37(17)

23(10.5)

47(21)

37(17)

23(10.5)

47(21)

37(17)

23(10.5)

50(22)

41(19)

26(12)

Qty 54 54 54 54 54 54 54 54 54 60 60 60

Page 50: Casing Tools

Varco BJ

Casing Slips, Drill Collar Slips

208

Casing Slips, Drill Collar Slips

CMS-XL Extra Long Multi-Segment Casing SlipsDescriptionToday’s deeper drilling calls for long and heavy casing strings. Varco has slips to handle any casing job.Varco CMS-XL slips are manufactured from drop forgings, reinforced to take severe service. The self-centering full wraparound grip prevents damage to casing. With certain simple adjustments, the CMS-XL can accommodate casing from 6 5/8” to 30” OD. All Varco BJ slips have an API taper of 4” /ft on the diameter.

CMS-XL Casings Slips & CPSConductor Pipe Slips

Slip Set Casing OD (in) P/N

CMS-XL

6 5/8 5315

7 5301

7 5/8 5303

8 5/8 5305

9 5/8 5307

10 3/4 V5309

11 3/4 5311

12 3/4 & 13 3/8 5313

14 5325-1

16 5325

18 5335-1

18 5/8 5333

20 5329

221

NOTES:1. Use 23” bowl

5331-22

24 5331

26 5346

28 5342-1

30 5342

CP-S

24 5338

26 5344

30 5340

CMX-XL SLip

DCS Drill Collar SlipsDescriptionEach slip segments is a rugged drop forging with an extra long back to provide maximum support to the circular button gripping elements. Full wraparound design and circular buttons assure positive holding and slip setting. Drill collar slips are flat on top to accommodate the MP Clamp. All Varco slips have an API taper of 4” /ft on the diameter.

DCS Drill Collars Slips Complete

Slip Set OD (in.) Drill Collar P/N

DCS-S3 - 4 2572

4 - 4 7/8 2573

DCS-R41/2 - 6 2552

51/2 - 7 2550

DCS-L

51/2 - 7 2501

63/4 - 8 1/4 2503

8 - 91/2 2507

81/2 - 10 2530

91/4 - 111/4 2508

11 - 123/4 2534

12 - 14 V2536

Page 51: Casing Tools

Varco BJ

Circular Buttons

209

Circular Buttons

Circular Buttons for CMS-XL and CP-S

Slip Set CasingOD (in) P/N

Weight Qty

Lbs Kg

CMS-XL

6 5/8 2628-144 36 16 144

7 2619-144 36 16 144

7 5/8 2630-144 24 11 144

8 5/8 2630-156 26 12 156

9 5/8 2630-168 28 13 168

10 3/4 2630-180 30 14 180

11 3/4 2627-204 51 23 204

12 3/4 & 13 3/8

2630-216 36 16 216

14 13868-240 40 18 240

16 2631-252 43 19.5 252

18 13868-300 60 27 300

18 5/8 2626-300 60 27 300

20 2631-312 52 23.3 312

22 13868-360 60 27 360

24 2631-360 60 27 360

26 2631-396 64 29 396

28 13868-432 68 31 432

30 2631-444 72 32.5 444

CP-S

24 2631-156 26 12 156

26 2631-168 28 13 168

30 2631-192 32 14.5 192

Circular Buttons for DCS Slips

Slip Set Drill Collar OD (in.) P/N

Weight Qty

Lbs Kg

DCS-S3 - 4 2628-49 13 6 49

4 - 4 7/8 2620-49 8 3.5 49

DCS-R4 1/2 - 6 2628-63 16 7 63

5 1/2 - 7 2620-63 11 5 63

DCS-L

5 1/2 - 7 2513-88 22 10 88

6 3/4 - 8 1/4 2630-88 15 7 88

8 - 9 1/2 2630-96 16 7 96

8 1/2 - 10 2627-104 26 12 104

9 1/4 - 11 1/4 2630-112 19 8.5 112

11 - 12 3/4 2625-136 13 6 136

12 - 14 2630-136 16 7 136

Page 52: Casing Tools

Varco BJ

Multipurpose Safety Clamps

210

Multipurpose Safety Clamps

MP Safety Clamp

Multipurpose Safety Clamp

Range (inches) P/N Qty

LinksGrip Dies

MP-S

2 7/8 - 4 1/8 33030 7 8

4 - 5 33031 8 9

MPR

4 1/2 - 5 5/8 33011 7 8

5 1/2 - 7 33012 8 9

6 3/4 - 8 1/4 V33013 9 10

8 - 9 1/4 V33014 10 11

9 1/4 - 10 1/2 33015 11 12

MP-M

10 1/2 - 11 1/2 33016 12 13

11 1/2 - 12 1/2 33017 13 14

12 1/2 - 13 5/8 33018 14 15

13 5/8 - 14 3/4 33019 15 16

14 3/4 - 15 7/8 33020 16 17

MP-L

15 7/8 - 17 33021 17 18

17 - 18 1/2 33022 18 19

18 1/8 - 19 3/8 33023 19 20

MP-XL

19 3/8 - 20 3/8 33024 19 20

20 3/8 - 21 1/2 33025 20 21

21 - 22 5/8 V33032 21 22

22 5/8 - 23 3/4 V33033 22 23

23 3/4 - 24 7/8 33034 23 24

24 7/8 - 26 V33035 24 25

26 - 27 1/8 33036 25 26

29 3/8 - 30 1/2 V33039 28 29

Page 53: Casing Tools

Varco BJ

Power Slips

Power Slips

PS-15 & PS-16 Power SlipsDescriptionVarco Power Slips are designed to eliminate the manual lifting and setting of slips. The PS-15 uses coil springs as a counterbalance to offset the weight of the slips when in upper, released position. Slips are set by standing on the slipset ring. The foot pedal is pressed to release the slips. The PS-16 is an air operated power slip controlled with a foot valve. The slips are set by gravity and released with air pressure much like Varco BJ’s casing elevator/spiders. PS-15 and PS-16 Power Slip Features:

■ Fits directly into Varco pin drive master bushings.

■ Fits 27 ½ and 37 ½ to 49 ½ rotary tables using adapter rings

■ Accommodates 3 ½ to 6 5/8 OD Drill pipe

PS 15 Spring Slip

PS 16 Power Slip

211

Foot pedal P/N 7831Connecting hoses P/N 11814 (2 required)

PS-15/PS-16

Slip Body Size In.

Drill Pipe Size In.

Ps-15 Complete With Guide & Slip Set P/N

Ps-16 Compl. With Air Con-trols & Hose

Guide & Slip Set P/N

Slip Set P/N Insert Set P/N

Guide Ring P/N

4 1/2 3 1/2 18172-45-35 78181-45-35 7686 2163-16B-32 79011-1

4 1/2 4 18172-45-40 78181-45-40 7685 2164-16B-32 79011-2

4 1/2 4 1/2 18172-45-45 78181-45-45 7684 2165-48 79011-2

5 1/2 4 1/2 18172-55-45 78181-55-45 7691 2168-16B-32 79011-2

5 1/2 5 18172-55-50 78181-55-50 7690 2169-16B-32 79011-3

5 1/2 5 1/2 18172-55-55 78181-55-55 7689 2170-48 79011-4

7 5/81

NOTES:1. For tripping only

6 5/8 78181-76-66 7696 2632-24B-48 7799

Page 54: Casing Tools

Varco BJ

HT Manual Tongs

212

HT Manual Tongs

HT Tong

Manual Tong Selection Chart

Description Rangeinches

Torquecapacity

Ft LbsHT200 6 - 16 200000

HT135 7 1/2 - 12 135000

HT100 4 - 17 100000

HT65 3 1/2 - 17 65000

HT55 3 1/2 - 13 3/8 55000

HT35 2 3/8 - 10 3/4 32000

HT14 2 3/8 - 7 12000

HT50 13 3/8 - 25 1/2 50000

HT50 25 1/2 - 36 50000

Tong Assemblies

Description TorqueFt Lbs

WghtLbs P/N

HT14Complete less lug jaws 12000 99 200640

Lug jaw assembly 2 3/8” - 3 1/2” 10000 12 200645-1

Lug jaw assembly 3 1/2” - 5” 10000 15 200646-1

Lug jaw assembly 4 3/4” - 6 1/4” 12000 24 200647-1

Lug jaw assembly 5 3/4” - 7” 12000 30 200648-1

HT 35Complete with long lever,

less lug jaws 32000 242 200620-2

Complete with short lever,less lug jaws 32000 238 200620-3

Lug jaw assy. 2 3/8”-3.668” 15000 25 200076-1

Lug jaw assembly 2 7/8”-4 1/4” 15000 29 200077-1

Lug jaw assembly 3 1/2”-5 1/4” 25000 33 200078-1

Lug jaw assembly 5 1/4”-7” 32000 45 200079-1

Hinge & lug jaw assembly 7”-8 5/8” 25000 33 200080-2

Hinge & lug jaw assembly 9 5/8”-10 3/4”

32000 76 200081-2

HT 55Complete with long lever, less lug

jaws 55000 400 200560

Complete with short lever, less lug jaws 55000 386 200560-1

Lug jaw assembly 3 1/2”-5” 30000 29 200083-1

Lug jaw assembly 5”-6 3/4” 55000 39 200084-1

Lug jaw assembly 6 5/8”-9” 55000 56 200085-1

Lug jaw assembly 9”-10 3/4” 40000 60 200086-1

Lug jaw assembly 11 3/4” 40000 61 200087-1

Lug jaw assembly 12 3/4”-13” 30000 72 200089-1

Lug jaw assembly 13 3/8” 30000 72 200090-1

HT 65Complete less lug jaws 65000 440 200540

Lug jaw assembly 3 1/2”-8 1/4” 65000 82 200546-1

Lug jaw assembly 8”-11 1/4” 65000 97 200547-1

Lug jaw assy. 11 3/4”-14 3/8” 40000 71 200548

Lug jaw assembly 16”-17” 40000 83 200549

Hinge jaw assembly 8 1/2”-17” 65000 56 200545-1

Page 55: Casing Tools

Varco BJ

HT Manual Tongs

213

HT 100Complete less lug jaws 100000 533 200071

Lug jaw assembly 4”-8 1/2” 100000 135 200663-1

Lug jaw 8 1/2”-12” 100000 102 200664

Lug jaw 12”-15” 75000 140 200665

Lug jaw 15 3/4” 100000 162 200666

Lug jaw 16”-17” 60000 135 200667

Hinge jaw assy. 8 1/2”-17” 100000 112 200662-1

HT 135Complete less lug jaws 135000 659 200520

Lug jaw 7 1/2”-9 1/2” 135000 142 200525

Lug jaw 9 1/2”-11” 135000 168 200526

Lug jaw 10 3/4”-12” 135000 182 200527

HT 200Complete less lug jaws 200000 1050 200500

Lug jaw 6”-7 7/8” 200000 80 200506-SP

Lug jaw assembly 8”-9 5/8”or 11 1/2”-13 1/4”

200000 89 200506-1

Lug jaw assy. 9 1/2”-11 1/8” or 13”-14 3/4”

200000 104 200507-1

Lug jaw assembly 11”-12 1/2” or 14 3/8”-16”

200000 150 200508-1

Hinge jaw assy. 11 1/2”-16” 200000 60 200505-1

HT 501

Casing head assy. 13 3/8”-14 1/2” 50000 340 200580-1

Casing head assy. 14 1/2”-16” 50000 352 200580-2

Casing head assy. 16”-17 1/2” 50000 373 200580-3

Casing head assy. 17 1/2”-19” 50000 385 200580-4

Casing head assy. 19”-20” 50000 397 200580-5

Casing head assy. 20”-21 1/2” 50000 418 200580-6

Casing head assy. 21 1/2”-23” 50000 430 200580-7

Casing head assy. 24”-25 1/2” 50000 459 200580-8

Casing head assy. 25 1/2”-27” 50000 490 200600-1

Casing head assy. 27”-28 1/2” 50000 499 200600-2

Casing head assy. 28 1/2”-30” 50000 531 200600-3

Casing head assy. 30”-31 5/8” 50000 542 200600-4

Casing head assy. 31 1/2-33” 50000 572 200600-5

Casing head assy. 33”-34 1/2” 50000 612 200600-6

Casing head assy. 34 1/2”-36” 50000 618 200600-7

NOTES:1. To be used with HT55 tong and hanger

Tong Assemblies (Continued)

Description TorqueFt Lbs

WghtLbs P/N

Page 56: Casing Tools