This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Bo
lts, Nu
ts, Wash
ers, A
llthread
13
Bolts, Nuts, Washers, Allthread
browse / view your prices / enquire & order online: www.anzor.com.au
17browse / view your prices / enquire & order online – www.anzor.com.au/bumax
B – Bolt (DIN931) S – Set Screw (DIN933)Fully Threaded
Higher Tensile Bumax Bolts & Set Screws
Grade of material is 316LHiMo (2343) – 316 stainless steel, with low carbon and high molybdenum, for improved corrosion resistance and strength.
M10
M10 x 20 S
M10 x 30 S
M10 x 40 S
M10 x 50 B
M10 x 60 B
M10 x 70 B
M10 x 80 B
M10 x 90 B
M10 x 100 B
M12
M12 X 30 S
M12 x 40 S
M12 x 50 B
M12 X 55 B
M12 x 60 B
M12 x 70 B
M12 x 80 B
M12 x 90 B
M12 x 100 B
M12 x 120 B
M16
M16 x 50 S
M16 x 60 S
M16 x 70 B
M16 x 80 B
M16 x 90 B
M16 x 100 B
M16 x 120 B
M20
M20 x 50 S
M20 x 60 S
M20 x 70 B
M20 x 80 B
M20 x 90 B
M20 x 100 B
M20 x 120 B
Bumax 88Class 80
Bumax 88Class 80
Bumax 88Class 80
Bumax 109Class 100
Bumax 109Class 100
Bumax 109Class 100
Bumax 88 and Bumax 109
The strongest stainless fastener in the market.The BUMAX 88 and 109 fasteners are developed to achieve ultimate tensile and yield strength values in line with those of steel screws in class 8.8 and 10.9. The BUMAX products can also give top performance long after standard fasteners have reached their limits. The difference compared to conventional products is especially noticeable in extreme environments.
Made from the best material in the market.The BUMAX fasteners are manufactured from a variant of acid-proof Swedish steel SS 14.2343. The striking feature of the stainless steel’s composition is its low Carbon content and increased content of Chromium, Molybdenum and Nickel. Laboratory tests and practical application have shown that the special composition gives BUMAX products unsurpassed perfomance in a number of vital areas.
Superior corrosion resistance.Corrosion is a very difficult problem in damp and abrasive environments. The combination of low carbon content and the increased content of alloying elements gives the fasteners Bumax 88 and 109 superior resistance to corrosion.
Lower weight, same strength.As modern constructions develop, we are constantly aiming for minimum weight combined with retained or increased strength. Bumax 88 and Bumax 109 fasteners offer unique strength properties in relation to their weight. Fasteners of conventional standards often need two or three times the weight to manage the same job as a Bumax fastener.
Developed for demanding environments.Water, aggressive liquids, vibration, high pressure, extreme temperatures - today’s constructions must be able to withstand many harsh conditions and forces. It is here that the difference between Bumax products and conventional fasteners can be most clearly seen. When it comes to high strength, weight minimisation or a corrosive environment, the Bumax 88 and 109 fasteners are the superior solution.
Fasteners types available.These fastener types are available in Bumax: Hex Head Bolts, Hex Head Set Screws, Threaded Rod (p.24), Hex Nuts (p.28), Flange Nuts, Engineers Studs, Threaded Studs, Hex Socket Capscrews, Csk Socket Screws, 6-Lobe Pan & Csk Machine Screws, Pan Head Pozi Drive Machine Screws, 6-Lobe Csk & Pan Self Tappers, Pan Head Pozi Drive Plastite Screws & Round Washers.
BUMAX 88 and 109 are stainless steel fasteners with increased strength and corrosion resistance.
Code: BHMB.. DIN931/933
Additional Bumax Products:
Bumax Threaded Rod – p.24
Bumax Hex Nuts – p.28
PLEASE REFER TO PAGE 16 FOR TECHNICAL MEASUREMENTS.
BO
LTS
BO
LTS
Other Bolt sizes available on request – M4, M6, M8, M18, M20,
M24, M27, M30, M36 (minimum order qty may apply).
S – Set Screw (Fully Threaded)Code: BHC..
18 browse / view your prices / enquire & order online – www.anzor.com.au/bolts
304 304316 316
Hex Bolts & Set Screws – UNC & BSW (1/2”)
316304
1/4 X 5/8 S
1/4 X 3/4 S S
1/4 X 1 S S
1/4 X 1-1/4 B,S B,S
1/4 X 1-1/2 B,S B,S
1/4 X 1-3/4 B,S B,S
1/4 X 2 B,S B,S
1/4 X 2-1/4 B B
1/4 X 2-1/2 S B,S
1/4 X 2-3/4 B
1/4 X 3 B B,S
1/4 X 3-1/2 B
1/4 X 4 B,S
1/4 X 4-1/2 B
1/4 X 5 B
Notes: (1) Thread form for imperial Hex Bolts is UNC except for 1/2” for which both BSW and UNC are available (2) Standard Length of Thread:
- The thread lengths shown above apply to bolts 6” and less - For bolts exceeding 6” in length add 1/4” to the thread length
Continued on next page.....
B – Bolt. S – Set Screw (Fully Threaded).
B – Bolt
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
B8/B8M Studs & Nuts for the Petrochemical Industry
B8 B8M
Stud - ASTM A193 CL2* (304) (316)
Imperial Range 1/2” – 4” B8 B8M
B8 B8M
Heavy Hex Nut - ASTM A194 CL2* (304) (316)
Imperial Range 1/2” – 4” B8 B8M
Available to order on request.
Also available in grades: B7, B7M, L7, L7M, B16, B8T, Duplex, Super Duplex, Monel, Inconel, Hastelloy, Titanium, Nickel, Zirconium, Carpenter 20, Incoloy.
About Loctite Nickel Anti-SeizeNickelAnti-Seizeiscopperfree.Recommendedfor stainless steel and other metal fittings. For preventingcorrosion,seizing,andgallinginharshchemical environments, and temperatures to 2400 °F (1315 °C).
See page 226 or visit www.anzor.com.au/loctite for more info.
304 304316 316
Cup Head Square Neck Bolts (Coach Bolts) - Metric
Code: BCBM..
316304
M12 X 150 • •
M12 X 160 • •
M12 X 180 • •
M12 X 200 • •
M12 X 220 • •
M12 X 240 • •
M12 X 260 • •
M12 X 280 • •
M12 X 300 • •
M12 X 360 • •
M12 X 400 •
M16
M16 X 80 •
M16 X 100 •
M16 X 120 •
M16 X 150 •
M16 X 180 •
M16 X 200 •
M16 X 220 •
M16 X 240 •
M16 X 260 •
M16 X 300 •
M16 X 360 •
M6 M8 M10 M12 M16
Head Dia (mm) 16 20 24 30 38
Square A/F (mm) 6.5 8 10 12 16
22 browse / view your prices / enquire & order online – www.anzor.com.au/bolts
DIN603 (for length ≤150mm)
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
M6
M6 X 16 •
M6 X 20 •
M6 X 25 • •
M6 X 30 • •
M6 X 35 •
M6 X 40 • •
M6 X 50 • •
M6 X 60 • •
M6 X 70 • •
M6 X 80 • •
M6 X 90 •
M6 X 100 •
M8
M8 X 20 • •
M8 X 25 • •
M8 X 30 • •
M8 X 40 • •
M8 X 50 • •
M8 X 60 • •
M8 X 70 • •
M8 X 80 • •
M8 X 90 • •
M8 X 100 • •
M8 X 110 •
M8 X 120 •
M10
M10 X 25 •
M10 X 30 • •
M10 X 40 • •
M10 X 50 • •
M10 X 60 • •
M10 X 65 • •
M10 X 70 • •
M10 X 80 • •
M10 X 90 • •
M10 X 100 • •
M10 X 110 • •
M10 X 120 • •
M10 X 130 •
M10 X 150 •
M12
M12 X 40 •
M12 X 60 • •
M12 X 70 • •
M12 X 80 • •
M12 X 90 • •
M12 X 100 • •
M12 X 110 • •
M12 X 120 • •
M12 X 130 • •
M12 X 140 • •
BO
LTS
BO
LTS
23browse / view your prices / enquire & order online – www.anzor.com.au/bolts
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
35browse / view your prices / enquire & order online – www.anzor.com.au/washers
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
WidthOD ThicknessWidthOD
ThicknessODThicknessODSize(ID)
Thickness
M10
M10X50X3.0 •
M12
M12X50X3.0 •
M12X50X5.0 •
M16
M16X50X3.0 •
M16X50X6.0 •
M16X65X5.0 •
Square Washers – Metric
Spring Washers – Metric
Spring Washers – Imperial
Code: WQM..
Code: WSM..
Code: WSI..
316 316
316 316
304 304
304 304
M20
M20X50X3.0 •
M20X50X5.0 •
M20X65X5.0 •
M24
M24X65X5.0 •
M2.5 4.8 0.6 •
M3 6.2 0.8 • •
M4 7.6 0.9 • •
M5 9.2 1.2 • •
M6 11.8 1.6 • •
M8 14.8 2.0 • •
M10 18.1 2.2 • •
M12 21.1 2.5 • •
3/16 0.334 0.062 0.047 • •
1/4 0.489 0.109 0.062 • •
5/16 0.586 0.125 0.078 • •
3/8 0.683 0.141 0.094 • •
7/16 0.779 0.156 0.109 •
M14 24.1 3.0 • •
M16 27.4 3.5 • •
M18 28.8 3.5 •
M20 33.6 4.0 • •
M22 35.9 4.0 •
M24 40.0 5.0 • •
M27 41.2 4.9 •
M30 48.2 6.0 •
1/2 0.873 0.171 0.125 • •
5/8 1.079 0.203 0.156 •
3/4 1.271 0.234 0.188 •
7/8 1.464 0.266 0.219 •
1 1.661 0.297 0.25 •
316 316
WA
SH
ER
SW
AS
HE
RS
WA
SH
ER
S
DIN127
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Size(ID)
Size(ID)
Size(ID)
ODOD
OD
ThicknessODThicknessOD
36 browse / view your prices / enquire & order online – www.anzor.com.au/washers
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Internal Tooth Lock Washers
External Tooth Lock Washers
Code: WTIM..
Code: WTEM4..
DIN6797J
DIN6797A
304
304
304
M5 9.50 •
M6 10.90 •
M8 14.70 •
M10 17.70 •
Belleville Washers
Code: WBM4..
304 304
M6 12.5 0.70 •
M8 16.0 0.90 •
M10 20.0 1.10 •
M12 25.0 1.50 •
M14 27.8 1.50 •
M16 31.5 1.75 •
M20 40.0 2.25 •
M2.5 5.5 0.4 •
M3 6.0 0.4 •
M4 8.0 0.5 •
M5 10.0 0.6 •
M6 11.0 0.7 •
M8 15.0 0.8 •
OD 304
M12 20.20 •
M16 25.70 •
M20 32.80 •
M25 37.60 •
Thickness of Washer Plate
M10 18.0 0.9 •
M12 20.5 1.0 •
M14 23.7 1.0 •
M16 25.7 1.2 •
M18 29.9 1.3 •
Thickness of Washer Plate
WA
SH
ER
SW
AS
HE
RS
NU
TS
WA
SH
ER
S
NB: for compression data please go to www.anzor.com.au/bellevillewasher
Size(ID)
Size(ID)
Size(ID)
Size(ID)
Size(ID)
Size(ID)
37browse / view your prices / enquire & order online – www.anzor.com.au/washers
Nord-Lock Bolt Securing System – MetricCode: WNL6..
316 316
M3 •
M4 •
M5 •
M6 •
M8 •
M10 •
M12 •
M14 •
M16 •
M20 •
Locking Fasteners Subject to Extreme Vibrations or Dynamic Loads
The Nord-Lock bolt securing system achieves maximum safety when locking fasteners that are subject to extreme vibration or dynamic loads. This unique bolt securing system uses tension (geometry) to make the bolt self-locking instead of friction.
• TheNord-Lockboltsecuringsystemusesgeometryto safely lock bolted joints in the most critical applications.
• Thisuniquewedge-lockingsystemoffersthefollowing advantages:- Maximum safety- Resists loosening caused by vibration and
dynamic loads- Ease of assembly and disassembly
- Locking function is not affected by lubrication- Positive locking at low and high preload levels- Controllable preload- Same temperature characteristics as standard
bolt/nut- Reusable
The key is the difference in angles. Since the cam angle “ α “ is larger than the thread pitch “ β “, the pair of washers expand more than the corresponding pitch of the thread. Nord-Lock washers positively lock the fastener in a joint which is subjected to extreme vibration or dynamic loads.
Push Nuts
Code: NTPM4..
For a video about Nord-Lock, please got to www.anzor.com.au/nord-lock
M5 •
M6 •
M8 •
M10 •
M12 •
304
WA
SH
ER
SW
AS
HE
RS
WA
SH
ER
SW
AS
HE
RS
Screw Size Thickness (mm)
38 browse / view your prices / enquire & order online – www.anzor.com.au/washers
Cup Washers
Neo Backed Stainless Washers
EPDM Washers for HWF Screws
Code: WCG4..
Code: WNSG..
Code: WNT..
316
EPDM
316
304
304 304
6G •
8G •
10G •
12G •
14G •
12GX14MM(Grey) •
12GX16MM(Black) •
14GX16MM(Black) •
M8X16MM(Black) •
M8X20MM(Black) •
See page 81 for HWF Screws for wood or page 86 for HWF Self Drillers for metal.
10G 2.8 •
12G 3.5 •
14G 4.0 •
WA
SH
ER
SW
AS
HE
RS
NU
TS
WA
SH
ER
S
NB:tofitselftappingscrewsize.
39browse / view your prices / enquire & order online – www.anzor.com.au/washers
Neoprene Washers
EPDM Washers
Code: WNI..
Code: WNM..
1/4
1/4X5/8X1.5MM •
1/4X5/8X3.0MM •
1/4X3/4X1.5MM •
1/4X3/4X3.0MM •
1/4X7/8X1.5MM •
1/4X7/8X3.0MM •
M12
M12X50X3.0 •
M16
M16X50X3.0 •
3/16
3/16X1/2X1.5MM •
3/16X1/2X3.0MM •
3/16X5/8X1.5MM •
3/16X5/8X3.0MM •
3/16X3/4X1.5MM •
3/16X3/4X3.0MM •
3/16X7/8X1.5MM •
3/16X7/8X3.0MM •
NEOPRENE
EPDM
NEOPRENE
Nylon Washers – White
Code: NYWFM..
M8
M8X18X2.0 •
M8X24X2.5 •
M10
M10X20X1.7 •
M12
M12X22X1.9 •
M16
M16X31X2.5 •
M4
M4X9X1.6 •
M5
M5X11X1.6 •
M5X14X1.6 •
M6
M6X16X1.5 •
NYLONNYLON
WA
SH
ER
SW
AS
HE
RS
WA
SH
ER
SW
AS
HE
RS
40 browse / view your prices / enquire & order online – www.anzor.com.au/ureseal
Ureseal – for sealing against water & insulating materials
Code: WUI..
3/16X7/16S5/B •
1/4X1/2S6/B •
1/2X1S12/B •
1/4SX6/B •
5/16SX8/B •
3/8SX10/B •
1/2SX12/B •
S Series SX Series
8GPK8/B •
10GPK10/B •
12GPK12/B •
PK Series
S Series Soft compressible seal for general use, OD as standard sizes.
SX Series Soft compressible seal which features an extended entry creating an insulated and sealed result. Suitable for an under fitting application. Not suitable for use with Self Tapping Screws or any fastening which is driven down from the top.
For more information see: www.anzor.com.au/ureseal
Ureseals are designed to offer a range of protection at fixing points; sealing against water; insulating against contamination between different materials; and in the case of fastening into aluminium or a painted surface, Ureseals protect against surface damage.
Ureseals are manufactured from UV stable Polyurethane, in both compressible and semi-rigid.
SXR Series Hard semi rigid seal extended entry as SX series. Recommended for use under fastening heads, pan or countersunk.
PK Series Hard semi rigid seal extended entry as SXR series. Recommended for use with Self Tapping Screws.
Features include:• Formsacompleteseal.• NormalorCountersunkapplication.• Reducesshockloadsandengineinduced
resonance throughout the hull, if used during the interior fitting out.