BLDC Motor Controller Products Brochure.pdf · Programmable BLDC Motor Controller provides high efficiency, smooth and low noise control of BLDC motor. BLDC Motor Controller is having

Programmable BLDC Motor Controller provides high efficiency, smooth and low noise control of BLDC motor.

BLDC Motor Controller is having high power Mosfets to drive the motor using PWM to achieve Efficiency >85%

in most cases. Powerfull Micro controller brings in comprehensive & precise control of BLDC motor.

˜ Compatible with 650W, 850W,1000W,1200W,1500W motors.

˜ Over temperature protection. Power limit when over temperature is sensed.

˜ Programmable Current limit, torque control and speed control.

˜ Intelligence with a powerful micro controller.

˜ Synchronous rectification, ultra low drop, fast PWM to achieve very high efficiency.

˜ Low EMC.

˜ Configurable 60-degree or 120-degree hall position sensor.

˜ Supports any number of poles.

˜ Three modes of protection: brake switch, release throttle, 0-5V signals protections.

THE COMPANY :

BLDC Motor Controller

SALIENT FEATURES:

˜ Company with more than 19 years of experience in switching power supplies.

˜ Manufactured in a state-of-the-art ISO - 9001 Facility.

˜ Highly qualified & experienced R&D team.

2KW Controller (24 MOSFET/TUBE)

www.axiomevproducts.com

Power Wire - Red(+),Black(-),Orange(ignition)

Motor Phase - Green, Yellow, Blue

Throttle - Red, Black, Green

Hall Sensor - Red, Black, Green, Yellow, Blue

Brake Wire - Violet

Forward / Reverse - Gray

Enclosure - Aluminum

Dimension - W=119mm, L=334mm, H=64mm

Weight - 2.4 Kgs.

Standard - IP65 level

Model Number - C6KK480400

Motor Type - BLDC Motor

Maximum Rated Power - 48V/2000W

No.of MOSFETS - 24 MOSFETS

Voltage Range - 42V-56V DC

Current Limiting - Programable - upto 50A

Low Voltage Protection - 42V±1.0V0 0Motor Angle - 60 / 120 Selection

Break - Active High / Active Low

Speed Limit - Limits Speed up to - 25Km/h

Speedo Metre - Analog / Digital0 0Operating Temperature - 0 C to 50 C

SPECIFICATIONS

CONTROLLER WIRING DETAILS

MECHANICAL

Note: Cables length, color and rating as per customer requirements.

AXIOM EV PRODUCTS PVT. LTD.Plot No.: 188/A, Phase II, IDA,Cherlapally,Hyderabad - 500051, Telangana,INDIA.Ph : +91-40-27260555, 9959055175Email: [email protected]

* Specifications may change without prior notice.

-AEPF/MKTG-C48V50AL/241/01www.axiomevproducts.com

33

4.0

30

9.0

90.0

45.0

6.5

12.0

118.6

63

.9

Electric Rickshaw Battery Charger

C2AK480012

˜ High efficiency - consumes very little power.

˜ Extended battery life - Battery life is enhanced greatly.

˜ Intelligent with a powerful micro controller - programmable battery profile adjustment is possible.

˜ Deep discharge charging capability - charges batteries with deep discharge voltage of 32V.

˜ Over charge Protection - maximum charging time limit of 14 hours provided

˜ Battery reverse polarity protection

˜ Overload protection and accurate battery current limit.

SALIENT FEATURES:

Electric Rickshaw Charger is designed to fulfill charging needs of Electric Rickshaws. This intelligent charger is

capable of operating at wide Input AC voltage range of 170-300VAC.It has been designed to withstand the

adverse Indian power conditions. Efficient, compact in size, 4 stage battery charging algorithm are some of its

salient features when compared to the linear chargers (bulky transformer based chargers).Its high efficiency

and battery life extension features are its USP.

THE COMPANY :


(For 4 Battery System)




SPECIFICATIONS

AEPF/MKTG-48V12AL/242/01

AC InputAC Input Voltage - range : 170 - 300 VACAC Input Voltage - nominal : 230 VAC rmsAC Input Frequency : 47 - 53 HzAC Input Current - maximum : 5.0A rms

DC OutputMaximum DC Output Voltage : 65V ± 0.5V DC Output Current : 12A ± 0.5A DC Output Line & Load Regulation : Tolerance ± 2% at cableDC Ripple / Noise : <600mV / <1200mV Pk-Pk

ProtectionsOutput over load : AvailableOutput short circuit : AvailableOutput over voltage : AvailableOver temperature with auto recovery : AvailableBattery reverse : Available Boost charging safety timer : Available

EnvironmentalOperating Temperature : 0°C to +50°CStorage Temperature : -10°C to +60°C

MechanicalEnclosure : AluminumDimensions : W=150mm, H=85.5mm, D=225mmWeight : 3.2KgAC input connector : 2meter length with 3core , 3pin AC plug DC output connector : SB50 connector with 2Core cable

OperationAC input ON LED : Red LED Battery Charge ON LED : Green LED Blinking (any)Charge Complete : Red LED Off, all Green LEDs Constant

Special FeaturesUnit will monitor the battery voltage and produce output only when right battery pack connected.




MAINS ON

100%

>80%

>50%

<30%

CHARGER ON

150

85.5

225

All dimensions are in mm.

Electric Rickshaw Battery Charger



˜ Intelligent with a powerfull micro controller - programmable battery profile adjustment is possible.


˜ Over charge Protection - maximum charging time limit of 12 - 14 hours provided.

˜ Battery reverse polarity protection.

˜ Overload protection and accurate battery current limit.



adverse Indian power conditions. Efficient, compact in Size, 4 stage battery charging algoritham are some of its

salient features when compared to the linear chargers (bulky transformer based chargers).Its high efficiency


SALIENT FEATURES:

THE COMPANY :

C2AK480015


(For 4 Battery System)




SPECIFICATIONS


DC OutputMaximum DC Output Voltage : 65V ± 0.5V DC Output Current : 15A ± 0.5A DC Output Line & Load Regulation : Tolerance ± 2% at cableDC Ripple / Noise : <600mV / <1200mV Pk-Pk




OperationAC input ON LED : Red LED Battery Charge ON LED : Green LED Blinking (any)Charge Complete : Red LED Off, all Green LEDs ConstantCharger ON : Amber LED




www.axiomevproducts.com AEPF/MKTG-48V15AL/243/01

MAINS ON

100%

>80%

>50%

<30%

CHARGER ON

150

85.5

275




˜ Intelligent with a powerfull micro controller - programmable battery profile adjustment is possible.


˜ Over charge Protection - maximum charging time limit of 14 hours provided


˜ Overload protection and accurate battery current limit



adverse Indian power conditions. Efficient, Compact in Size, 4 stage battery charging algoritham are some of its

sailent features when compared to the linear chargers (bulky transformer based chargers).Its high efficiency


SALIENT FEATURES:

Electric Rickshaw/Loader Battery Charger

THE COMPANY :

C2AK600012(For 5 Battery System)





SPECIFICATIONS


DC OutputMaximum DC Output Voltage : 81.8V ± 0.5V DC Output Current : 12A ± 0.5A DC Output Line & Load Regulation : Tolerance ± 2% at cableDC Ripple / Noise : <800mV / <1600mV Pk-Pk




OperationAC input ON LED : Red LED Battery Charge ON LED : Green LED Blinking (any)Charge Complete : Red LED Off, all Green LEDs ConstantCharger ON : Amber LED





MAINS ON

100%

>80%

>50%

<30%

CHARGER ON

150

85.5

275


˜ Delivers a maximum current of 10A constantly and peak of 15A.

˜ Circuit designed with over voltage and under voltage protections..

˜ Overload and short circuit protection.

˜ Designed to meet adverse Indian power condition.

˜ Aluminum alloy cabinet with good heat dissipation and shock absorption.

˜ High performance due to highend technology

˜ Overload protection and accurate battery current limit

SALIENT FEATURES:

This DC-DC converter is designed to fulfill all kinds of Auxiliary power requirements of Electric Rickshaw. It is

engineered to meet specific requirement of Electric Bikes as well. It has an operating voltage range from 42VDC

to 60VDC.Efficient, cost effective, compact in size and light in weight are its UPS.

E Rickshaw DC-DC Converter

THE COMPANY :

B1KK120010(10A)





SPECIFICATIONS

DC InputDC Input Voltage - Range : 42 - 60 VDCDC Input Voltage - Nominal : 48VDCDC Input Current - Maximum : <5.0A

DC OutputDC Output Voltage : 13.2VDC ± 0.4V DC Output Current : 10A const.DC Output Peak Current : 15Amp peak DC Output Line & Load Regulation : Tolerance ± 2% at cableDC Ripple / Noise : <250mV / <1000mV Pk-Pk

ProtectionsOutput Over load : AvailableOutput Short circuit : AvailableOutput Over voltage : AvailableBattery reverse : Not Available


RegulatorySafety : Designed to meet (IEC60950)

MechanicalEnclosure : Aluminum Enclosure with Water Proof (IP65)Dimensions : L=92mm, W=64mm, H=41mmWeight : 800 GramsWiring : Red (Input),Yellow (Output),Black(Common) 3core , 3pin AC plug

DC input & output connector : TTP-23MN, 3pole connector




41

65


95

Four Wheeler DC-DC Convertor

˜ Delivers a maximum current of 72A constant

˜ Over Temperature protection

˜ Circuit designed with over voltage and under voltage protections


˜ Battery Deep Discharge protection

˜ Overload and short circuit protection

˜ Designed to meet adverse Indian road and climatic conditions

˜ Aluminum alloy cabinet with good heat dissipation and shock absorption

˜ Designed for high efficiency with resonance topology

This DC-DC converter is designed to fulfill all kinds of Auxiliary power requirements of Electric Cars/Vans. It is

engineered to meet specific requirement of Electric Mini Buses as well. It has an operating voltage range from

65VDC to 95VDC. Efficient, cost effective, compact in size and light in weight are its USP. This DC-DC converter is

enabled with CAN for onboard communications.

SALIENT FEATURES:

THE COMPANY :

C7AK120070(12V/72A)





SPECIFICATIONS



DC InputDC Input Voltage - Range 65 - 95VDC / (48VDC also available)DC Input Voltage - Nominal 72VDCDC Input Current - Maximum 17A

DC OutputDC Output Voltage 13.8VDC±0.4V DC Output Current 72Amp const. DC Output Power Nominal 1000 Watts DC Output Line & Load Regulation Tolerance ± 2% at cableEfficiency >90%

ProtectionsOutput Over Load Available Output Short Circuit Available Output Over Voltage Available Battery Reverse Available Over Temperature Available

CommunicationCAN Available Hardware Enable Available

EnvironmentalOperating Temperature 0°C to +50°CStorage Temperature -10°C to +60°C

MechanicalEnclosure Aluminum Enclosure with Water Proof (IP65)Dimensions L= 348mm, H=126mm, W=224mmWeight 8.3Kgs.Wiring (Input & Output) Red (+ve), Black (-ve)DC input & output connector As per requirement


348,4329,4

22

4 60

60

52

126

,4

224

˜ Delivers a maximum power of 3.0KW constant






˜ Designed to meet adverse Indian road and climatic condition



This Battery Charger is designed to fulfill all kinds of charging needs of Electric Cars/Vans. It is engineered to

meet specific requirement of Electric Mini Buses as well. It has an operating voltage range from 170VAC to

300VAC. Efficient, cost effective, compact in size and light in weight are its USP. This Battery charger is enabled

with CAN for onboard communications.

SALIENT FEATURES:

THE COMPANY :

B6AK720030(72V/30A)

Four Wheeler On-Board Battery Charger





SPECIFICATIONS



AC InputAC Input Voltage - Range - 170 - 300VACAC Input Voltage - Nominal - 230VACAC Input Current - Maximum - 16APower Factor - >0.95

DC OutputDC Output Voltage Nominal - 72VDC / (48VDC also available) DC Output Voltage Maximum - 95VDC DC Output Current - 30Amp DC Output Power Nominal - 2700 WattsDC Output Line & Load Regulation - Tolerance ± 2% at cableEfficiency - >90%

ProtectionsOutput Over Load - Available Output Short Circuit - Available Output Over Voltage - Available Battery Reverse - Available Over Temperature - Available

CommunicationCAN - Available Hardware Enable - Available

EnvironmentalOperating Temperature - 0°C to +50°CStorage Temperature - -10°C to +60°C

MechanicalEnclosure - Aluminum Enclosure with Water Proof (IP65)Dimensions - L= 348mm, H=126mm, W=248mmWeight - 8.3Kgs.Wiring (Input & Output) - Input : 2.5sq three Core Cable, Output : Red

(+ve), Black (-ve)DC input & output connector - As per requirement


348,4

329,4

24

8 80

44

292

12

6,4

Four Wheeler On-Board CCCU (Battery Charger + DC-DC Converter)


SALIENT FEATURES:

THE COMPANY :

This Combined Unit contains a 3KW Battery Charger along with 1KW DC-DC Converter to fulfill all kinds of

charging and auxiliary power requirements of Electric Cars/Vans. It is engineered to meet specific

requirement of Electric Mini Buses as well. This CCCU is designed for 72V/48V battery systems with inbuilt

CAN communication. Efficient, Cost effective, compact in size and light in weight are its USP’s.

˜ Both the Charger and DC-DC can operate at a time with a maximum power of 4.0KW constant






˜ Designed to meet adverse Indian road and climatic condition



˜ 19 Years Experience of the field.

˜ Experienced R&D Team.

˜ An ISO 9001:2008 Manufacturing facility.

SPECIFICATIONS

AC Input

CHARGER SPECIFICATIONS DC-DC SPECIFICATIONS

DC Input

AC Input Voltage - Range DC Input Voltage - Range

AC Input Voltage - Nominal DC Input Voltage - Nominal

AC Input Current - Maximum DC Input Current - Maximum

DC Output DC Output

DC Output Voltage Nominal DC Output Voltage

DC Output Current

DC Output Current

DC Output Power Nominal

DC Output Power

DC Output Line &

DC Output Line &

Load Regulation

Load Regulation

Efficiency

Efficiency

170 - 300VAC 65 - 95VDC/(48VDC also available)

230VAC 72VDC

16A 17A

72VDC / (48VDC also available) 13.8VDC±0.4V

30Amp

72Amp

2700 Watts

1000 Watts

Tolerance ± 2% at cable

Tolerance ± 2% at cable

>90%

>90%

Protections Protections

Output Over Load Output Over Load

Output Short Circuit Output Short Circuit

Output Over Voltage Output Over Voltage

Battery Reverse Battery Reverse

Over Temperature Over Temperature

Available Available

Available Available

Available Available

Available Available

Available Available

Communication Communication

CAN CAN

Hardware Enable Hardware EnableAvailable Available

Available Available

Mechanical

Enclosure

Dimensions

Weight

Wiring (Input & Output)

DC input & output connector

Aluminum Enclosure with Water Proof (IP65)

L= 455mm, H=125mm, W=348mm

18.0Kgs.

Input : 2.5sq three Core Cable, Output : Red (+ve), Black (-ve)

As per requirement

Environmental Environmental

Operating Temperature Operating Temperature

Storage Temperature Storage Temperature

0°C to +50°C 0°C to +50°C

-10°C to +60°C -10°C to +60°C

DC Output Voltage Maximum 95VDC

Power Factor >0.95

455

348

125

455 288

3D VIEW

FRONT VIEW RIGHT SIDE VIEW

TOP VIEW

LEFT SIDE VIEW

426

288

63 150 150 63

329



www.axiomevproducts.com AEPF/MKTG-CCCUL/599/00

BLDC Motor Controller Products Brochure.pdf · Programmable BLDC Motor Controller provides high efficiency, smooth and low noise control of BLDC motor. BLDC Motor Controller is having

Documents