Top Banner
Atlas Copco Technical specification Simba S7 D Long hole drilling rigs Standard features » Rock drill • Atlas Copco COP 1800-series • Dual-damping system for shock wave absorption and continuous rock contact for high penetration • Lubricated and pressurized mating surfaces giving long service intervals • Shank adapters suitable for the given hole range » Drilling unit • BMHP 6000-series heavy-duty aluminium hydraulic feed • Drill steel support for guidance during collaring and as support during rod handling • Front and rear-mounted stinger • Rod handling system » Hydralic boom • BUT 32PD boom with mine-adapted, sturdy components • Boom mounted drilling unit • Accurate and smooth movements » Control system • Direct Control System (DCS II) • Damper Pressure Controlled Impact (DPCI) • Rotation Pressure Controlled Feed (RPCF) • Anti-jamming system • Angle reading instrument, ARI S7 » Carrier • Mine-adapted carrier for small- to medium-sized drifts with articulated steering and four-wheel drive • Four jacks for stable set-up » General • Operator panel mounted under canopy • FOPS-approved telescopic protective roof • Working lights on protective roof • Hydraulically driven water booster pump • Hydraulically driven compressor • Cable reel • Optional cabin A versatile long hole drilling solution adapted for small- to medium- sized drifts. Drilling with hydraulic tophammer rock drill in the hole range 51–89 mm. Boom-mounted drilling unit for optimized reach and flexibility.
4

Atlas Copco Long hole drilling rigs Simba S7 D...Atlas Copco Technical specification Simba S7 D Long hole drilling rigs Standard features » Rock drill • Atlas Copco COP 1800-series

Nov 05, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Atlas Copco Long hole drilling rigs Simba S7 D...Atlas Copco Technical specification Simba S7 D Long hole drilling rigs Standard features » Rock drill • Atlas Copco COP 1800-series

Atlas Copco

Technical specification

Simba S7 DLong hole drilling rigs

Standard features »Rock drill•AtlasCopcoCOP1800-series•Dual-dampingsystemforshockwaveabsorptionandcontinuousrockcontactforhighpenetration

•Lubricatedandpressurizedmatingsurfacesgivinglongserviceintervals

•Shankadapterssuitableforthegivenholerange

»Drilling unit•BMHP6000-seriesheavy-dutyaluminiumhydraulicfeed•Drillsteelsupportforguidanceduringcollaringandassupportduringrodhandling

•Frontandrear-mountedstinger•Rodhandlingsystem

»Hydralic boom•BUT32PDboomwithmine-adapted,sturdycomponents•Boommounteddrillingunit•Accurateandsmoothmovements

»Control system•DirectControlSystem(DCSII)•DamperPressureControlledImpact(DPCI)•RotationPressureControlledFeed(RPCF)•Anti-jammingsystem•Anglereadinginstrument,ARIS7

»Carrier•Mine-adaptedcarrierforsmall-tomedium-sizeddriftswitharticulatedsteeringandfour-wheeldrive

•Fourjacksforstableset-up

»General•Operatorpanelmountedundercanopy•FOPS-approvedtelescopicprotectiveroof•Workinglightsonprotectiveroof•Hydraulicallydrivenwaterboosterpump•Hydraulicallydrivencompressor•Cablereel•Optionalcabin

A versatile long hole drilling solution adapted for small- to medium-sized drifts. Drilling with hydraulic tophammer rock drill in the hole range 51–89 mm. Boom-mounted drilling unit for optimized reach and flexibility.

Page 2: Atlas Copco Long hole drilling rigs Simba S7 D...Atlas Copco Technical specification Simba S7 D Long hole drilling rigs Standard features » Rock drill • Atlas Copco COP 1800-series

Simba S7 D

Specifications

FEEDBMHP 6800 BMHP 6804 BMHP 6805 BMHP 6806

Total length 3 141 mm 3 448 mm 3 753 mm

Drill rod length 1 220 mm 1 525 mm 1 830 mm

Total length with extractor 3 331 mm 3 655 mm 3 960 mm

»Positioning system

•Feeddump,drilling.............+24ºforwardand-79ºbackward•Feedextension............................................................ 900mm•Boomextension....................................................... 1250mm•Stingerforwardonfeed............................................BSJ4-45•Weight,boomonly......................................................2000kg•AngleReadingInstrument,ARIS7•RigAlignmentLaser(RAL)•BoomBUT32PD•Rearstinger

»Air system

•Compressor..................................................AtlasCopcoLE7•Capacityat5400rpmand7bar.....................................12l/s•Holeblowingkitwithexternalair•Lubricatedairfortherockdrill•Adjustableflow/pressure•Airpressuregauge•Airflowguard

»Electrical system

•Totalinstalledpower.....................................................80kW•Mainmotor....................................................................75kW•Voltage.................................................................380–1000V•Frequency.................................................................50–60Hz•Startingmethod................................... star/delta(380–690V)•Transformer....................................................................5kVA•Workinglights,mountedonroof............ 3x35W,24VHID•Electronicoverloadprotectionforelectricmotors•Digitalvolt/amperagemeterinelectriccabinet•Limitswitchforcablereelwithsignallamp•Manualspotlight,leftside•Phasesequenceindicator•Earthfaultindicator•Batterycharger•Cablereel

»Drilling unit

•RodHandlingSystem,RHS10............................... 10+1rods•AdaptabletoR32,TC35,T38,(T45)drillrods•Adaptableto4′,5′and6′rods•Mechanizeddrillingupto20m•Bigholedrillingkit

»Control system

•DirectControlSystem,DCSII-Lowpressurehydraulicsatoperatorpanel

•Rockdrilllubricationwarningkit•Percussionhourmeter

ROCK DRILL

COP 1838ME

Shank adapter R32, TC35, T38, (T45*)Hole diameter 51–89 mmImpact power 18 kWImpact rate 60 HzHydraulic pressure, max. 230 barRotation motors Separate rotationRotation speed 0–210 rpmLub. air consump. (at 3 bar) 5 l/sWater consumption 50-120 l/minWeight 170 kg

*T45 gives 9 rods in carousel instead of 10

»Power pack

•Hydraulicoiltank,volume,max..................................... 145l•Hydraulicpumps............................................................ 1unit•Filtration........................................................................ 16µm•Operator’scontrolpanelforrodhandling•Operator’scontrolpanelfordrilling•Water/Oilcoolerinstainlesssteel•Oiltemperaturemeteronoiltank•Hydraulicoilthermostat•Electricoilfillingpump•Pumpsunloadedatstart•Lowoillevelindicator•Mineralhydraulicoil•Oilfilterindicator

»Water system

•Hydraulicpoweredwaterboosterpump........FlygtPXR411H•Waterboosterpumpmaxcapacityat12bar.............. 60l/min•Minwaterinletpressure,bar..................................................2•Waterflowguard

»Carrier

•Deutz4-cylinder,D914L04,EPAIII/COMIII(Tier3/StageIIIA)approved4-strokeprechamberdieselengine

•Powerratingat2300rpm............................. 58kW(77.8hp)•Torqueat1500rpm....................................................270Nm•Articulatedsteering.................................. ±40°steeringangle•Gradeabilityatmax.loadondrivewheels......................... 1:4•Frontaxle(wide)...................................................... Dana112•Rearaxle.........................................Dana112,±7°oscillation•Tyres......................................................................9.00xR20•Clearanceoutsideaxles......................................................15°•Hydraulicjacks,front......................................... 2extendable•Hydraulicjacks,rear..............................................................2•Servicebrakes.............................................2separatecircuits•Emergencyandparkingbrakes.....................................SAHR•Fueltank,volume.............................................................. 60l•Electricsystem.................................................................24V•Batteries.............................................................2x12V,70Ah•Tramminglights.......6x40W24V,LEDand2x70w,24V•Automaticdifferentiallockonfrontaxle•12Voutletforcommunicationradio•Hydrostaticpowersteeringsystem•Horn,beaconandreversealarm•Bootswashingarrangement•Hydrostatictransmission•Fixedseatfortramming•Centralgreasepoint•Exhaustcatalyser•Illuminatedstairs•Four-wheeldrive•Fireextinguisher•Swingableseat•Handthrottle•Brakelights•Safetybelt•Halogen

Page 3: Atlas Copco Long hole drilling rigs Simba S7 D...Atlas Copco Technical specification Simba S7 D Long hole drilling rigs Standard features » Rock drill • Atlas Copco COP 1800-series

Simba S7 D

SpecificationsDRILL RODS

Rock drill Hole diameter, mm Drill rod Shank adapter Guide tube

COP 1838ME 51–64 R32 Speedrod R32 N/A

COP 1838ME/MUX 51-64 TC35 Speedrod TC35 N/A

COP 1838ME/MUX 64–76 T38 Speedrod T38 TDS 56

COP 1838HE/HUX 76–89 (T45 Speedrod) (T45) TDS 64

Optional equipment

»Drilling system•COP1638,COP1838MUX,COP1838HE,COP1838HUX•Watermistflushing,wateroilcooler,externalairsupply•Watermistflushing,airoilcooler,externalairsupply•Holeblowingkitwithinternalair

»Positioning system / Drilling unit•Automaticlubricationforpositioningsystem•Centrallubricationforpositioningsystem•Threadlubricationkit

»Power pack•Heaterkitforhydraulicoiltank

»Water system•Waterhosereel•Waterhose

»Carrier•FiresuppressionsystemANSUL,checkfirerelease•FiresuppressionsystemANSUL,manualrelease

»Cabin•FOPS-approvedcabin,noiselevel<80dB(A),height2800mmincluding:- Frontwindow16mm- Airconditioningunit- Fixedseat- Bootswashing- CD/USBplayer- Swingableseatfordrilling

•Cabinbodymadeofstainlesssteel•Frontwindow,24mm•Electricalheater,1.2kW,230V(CE)

»Electrical system•Startingmethod-softstart(notfor1000V)•Electricsaccordingtolocalstandards•Stainlesssteelelectricalenclosure•Electricalcableonreel,H07RN-F•Workinglights,2x200W,24V•Electricalcableonreel,Buflex•SocketPC4/PC5•PlugPC4/PC5•Switchgear

»Miscellaneous•Rodholderforextradrillrods•Shelfforbitsandtools•Manuallubricationkit•Ni-Crpistonrods•Rigwashingkit

nOISE anD vIBRatIOnOperator sound pressure level in canopy, drilling, free field (ISO 11201)

106+-6 dB(A) re 20uPa

Operator sound pressure level in cabin, drilling, free field (ISO 11201)

75+- 3 dB(A) re 20uPa

Operator sound pressure level working close to machine, drilling, free field

106+-6 dB(A) re 20uPa

Sound power level (ISO 3744), drilling, free field 126 dB(A) re 1pW

Vibration levels seated in canopy, drilling (ISO 2631-1) 0.1+- 0.15 m/s^2

Vibration levels seated in cabin, drilling (ISO 2631-1) 0.07+- 0.07 m/s^2

Vibration levels standing in canopy, drilling (ISO 2631-1) 0.1+- 0.15 m/s^2

Vibration levels standing in cabin, drilling (ISO 2631-1) 0.07+- 0.07 m/s^2

Page 4: Atlas Copco Long hole drilling rigs Simba S7 D...Atlas Copco Technical specification Simba S7 D Long hole drilling rigs Standard features » Rock drill • Atlas Copco COP 1800-series

Simba S7 D

9851

264

1 01

c 0

1/20

11©

Cop

yrig

ht 2

011,

Atla

s Co

pco

Rock

Dril

ls A

B, Ö

rebr

o, S

wed

en. A

ll pr

oduc

t nam

es in

this

pub

licat

ion

are

trade

mar

ks o

f Atla

s Co

pco.

Any

una

utho

rized

use

or c

opyi

ng o

f the

con

tent

s or

any

par

t the

reof

is p

rohi

bite

d. Il

lust

ratio

ns a

nd p

hoto

s in

this

b

roch

ure

may

sho

w e

quip

men

t with

opt

iona

l ext

ras.

No

war

rant

y is

mad

e re

gard

ing

spec

ifica

tions

or o

ther

wis

e. S

peci

ficat

ions

and

equ

ipm

ent a

re s

ubje

ct to

cha

nge

with

out n

otic

e. C

onsu

lt yo

ur A

tlas

Copc

o Cu

stom

er C

ente

r for

spe

cific

info

rmat

ion.

Measurements

COvERaGE aREa

SIDE vIEw

DIMEnSIOnS

mm Width 2 000

Height tramming, roof down 2 100

Height roof up 2 800

Length tramming (with BMHP 6804/05/06) 8 805*/9 112*/9 417*

Ground clearance 335

wEIGHt

gross weight

kg Total 11 800

Boom side 7 800

Engine side 4 000

tURnInG RaDIUS

depending on surface

mm Outer 5 000

Inner 2 850

*+200 mm with extractor

S7

1400140020957926

2100

365

2800

RECOMMEnDED DRIFt SIZE

Feed Rod Minimun*(h x w)

Maximun** (h x w)

mm BMHP 6804 1 220 3,3 x 3,3 7,2 x 8,5

BMHP 6805 1 525 3,7 x 3,7 7,5 x 8,8

BMHP 6806 1 830 4 x 4 7,8 x 9,1

* Minimum without extractor, with +200mm** Maximum with extractor

20003100

1460

175

35o

79˚ (Tilt)

35o 24o (Tilt)

1380

4166

8173

COVERAGE AREA DRIFTING

1500

3756

5874

900Feed extension

7700

175 2605 1250

1250

1380Stinger extension

55˚

35 o35 o

5757*

* parallel coverage

R4044

R2840

± 114˚ 360˚

6014

tURnInG RaDIUS

40°

R2850

R5000

2800

2800

COP 1838: RECOMMEnDED CaBLE SIZE anD LEnGtH

voltage type Dimension, mm2 Diameter, mm

Length, m

380–400 V H07RN-F 4G70 49 70Buflex 3x95+3G16 45 100

440 VH07RN-F 4G70 49 70Buflex 3x95+3G16 45 100

500–525 VH07RN-F 4G50 44 90Buflex 3x70+3G16 39 135

550–575 VH07RN-F 4G50 44 90Buflex 3x70+3G16 39 135

660–690 VH07RN-F 4G35 38 110Buflex 3x50+3G10 33 160

1,000 VH07RN-F N/A N/A N/ABuflex 3x35+3G6 29 200

Recommendations are given for surrounding temperature of 40° C and up to a height of 2,000 m.