Top Banner

Click here to load reader

ARM7 XT008

Mar 08, 2015

ReportDownload

Documents

GSM/GPRS/GPS VEHICLE TRACKER USER MANUAL-ARM7

U

Preface

Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.1

Content1 2 3 Summary Application Hardware description 3.1 3.2 3.3 4 5 6 7 8 Wiresconnection ---------------------------------------------------------------------------Interior ------------------------------------------------------------------------------------- ------Relays connection ---------------------------------------------------------------------------------------------------------------------------------------------------------------------3 5 5 6 6 7 7 8 8 8 8 8 8 9 9 9 10 10 -----------------------------------------------------------------------------------------------------------------------------------------------------------------3 3

Specifications

Battery and SIM card installation -----------------------------------------------------------------Startup Usage ------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------- --

Fortifying mode --------------------------------------------------------------------------------- --------8.1 Engine started alert ---------------------------------------------- --------- --------

8.2 Movement alert --------------------------------------------------------- --------- -------8.3 Power cutoff alert --------------------------------------------------------- --------- -------8.4 ENGINE-OFF Remotely function 8.5 Increase relays function ---------------------------------------------- --------- --------

--------------------------------------------------- --------- ----------------------------------------- --------- --------

8.6 More function with using the relays 8.7 Checking the working status 9 Tracking mode 9.1 9.2 9.3 9.4 9.5 9.6. 9.7 9.8 9.9 Initialization Authorization Auto Track Geo-fence Tlimit Function Movement alert Overspeed alert IMEI checking

----------------------------------------- --------- ------- 9

-------------------------- --------- -------- ---------------------------------------- --------- ---------------------------------------- --------- ---------------------------------------- --------- ------

Change the Password

---------------------------------- --------- ------11 ---------------------------------- --------- ---------------------------------------- --------- ---------------------------------------- --------- ----------------------------------------- --------- ------------------------------------- --------- -------15 15 12 12 13 14 15

9.10 Time differences setting ----------------------------------------------------------------9.11 SOS 9.12 SMS LINK 8.13 SMS ONE --------------------------------- --------- --------

--------------------------------- --------- --------------------------------------16 ----------------------------------------------------------------------------162

9.14 Low battery alert 9.15 SMS center 9.16 GSM ID 9.17 Motion Sensor 9.18 SD Card function

--------------------------- --------- ------------------------------------ --------- ---------------------------------- --------- ---------------------------------- --------- ------------------------------------- --------- ------------------------------------- --------- --------

16 16 16 17 17 17 17 18 19 19 19

9.19 SIM conversion from A to B 10 11 12 13 14 Monitor Mode GPRS setting Cautions Faults & Solutions Accessories diagram

------------------------------ --------- --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

1 SummaryWorking based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle.

2 ApplicationsRental vehicle / Fleet management etc Covert Tracking

3 Hardware Description3.1 Wires Connection

SIM B Card slot

3 Connect GSM antenna

For upgrade the firmware

Connect GPS antenna

DC +9-36V Working modes indicator light

2

4 6

8 10 12

14 16 18

20

E

F

G H

1 GPS indicator light GND

3

5 7 9 11 13 15 17

19

A

B

C D

1 SP Connects the round speaker (connection is ready ,only need connect the speaker) 2.SP + Connects the round speaker (connection is ready ,only need connect the speaker) 3. MIC + microphone +(connection is ready) 4. MIC + microphone -(connection is ready) 5. GND SOS Ground (connection is ready) 6. SOS SOS +(connection is ready) 7. Oil test (analog input port )connects the black wire for the fuel sensor. Note: Please use our fuel sensor only. 8. ACC (digital input port) connect the ACC (ignition) 9. V + connects relay, connction is ready,conencts the relay,it works. 10. Output (digital output) Connects the extra relays 11. Temperature test (analog input port) connects the middle connector of the round temperature sensor. 12. Cut oil (digital output) connects the relay, connction is reay,conencts it,it works. 13. Out A (digital output) for the extra relay. 14. Out B (digital output) for the extra relay. 15. IO6 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car. 16. IO5 in(digital input port) connects the detective circuit of the switches for the doors and tail in the car. 17. IO4 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car. 18. IO3 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car 19. IO2 in (digital input port) connects the detective circuit of the switches for the doors and tail in the ca 20. IO1 in (digital input port) connects the detective circuit of the switches for the doors and tail in the ca Note: Two UART with the connectors of A.B C D; E F G H for 2 purposes. A. Connect the extra camera4

B. For input/output the data Connects any conenctors ABCD or EFGH optionally, function actived. UART1 (al-qeada ND B.R X cristiano TX d. + 5V) UART 2 (um participant G.T X X F.R ND h. + 5V)

3.2 Interior

Put SIM card here A(back of Mainboard)

Put SD card here 3.3 Relays connection

Relays

Conencts the main port of the the tracker

Connect oil routes

Connect oil routes

5

4 Specs

Content Dimension. Weight Network Band GPS chip GPS sensitivity GPS accuracy Time To First Fix

Specs. 8.2x8.2x2.8cm 195g GSM/GPRS 850/1800/1900Mhz or 900/1800/1900Mhz SIRF3 chip -159dBm 5m Reacquisition 0.1s Cold status 45s Warm status 35s Hot status 1s 936V input Chargeable changeable 3.7V 1100mAh Li-ion battery 50hous -40C to +85C -20C to +55C 5%--95% non-condensing

Power Battery Standby Storage Temp. Operation Temp. Humidity

5 Battery and SIM card installationMake sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, cant be identified for PDU format.

Steps:1.Open the rear cover, insert a SIM card to the simcard slot A. (If using one simcard,do not insert it into simcard slot A since the default simcard is simcard B) 2.Insert the SD card 3.Use a stick or pick up the simcard slot B,insert the simcard.

SIM card A

Use a stick to pick up the simard slot B

Install SD card

6

Insert the simard slot with the the sim card

Put the SIM card into the slot with the right direction.

6 Startup

Put the SIM card and SD card in right places.(Put the B card slot in place,the blink quickly after 10 seconds, remove card slot B, tracker stops working)

indicator light will

Connect the power supply of the car (The red indicator inside the car in on when conencting the 9-36 V power supply) It takes 40-60 seconds to get theGPS and GSM signals and begins to work.The red indicator blinks every 2 seconds,the blue GPS indicator blin Everything is ready when the blue GPS indicator is on, you can play the following Settings.

7 Usage

The tracker has three working modes: Fortifying mode, Tracking mode and Monitoring mode. Modes can be changed reciprocally. The default mode is Fortifying mode,sends command tracker+password,gets tracking mode,sends minitor+passwords,get Fortifying mode,sends fortify+password,goes back fortifying mode

7

8 Fortifying ModeUnder the fortifying mode, call the tacker to arm or disarm the fortify function.When the forify mdoe is armed,the indicator blinks every 4 seconds and if blinks every 1 seconds,means the fortify is disarmed.(There is no cooridnates goes back with the sms to cell phone when the fortify is armed) When the fortify is armed,the alerts will be as below:

8.1 Engine Started illegally AlertIn fortifying mode, the tracker will start the ACC examine automatically. It will warn up the user when the engine is started. Alert SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F fortify imei:354776036842240 05 130.8 460 01 9523 29062

8.2 Movement AlertThis function is using for the owner to get an alert

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.