Top Banner
Area Lighting KAD/KAC Contour" Series KAD Features KAC Housing: Rugged, die-cast, soft-corner alu- minum housing with 0.12" nominal wall thick- ness. Extruded 4" soft corner arm for pole or wall mounting is standard. Dark bronze poly- ester powder finish is standard with other architectural colors available. Door Frame: KAD die-cast door frame has impact-resistant, tempered glass lens which is fully gasketed with one-piece bonded tu- bular silicone. KAC die-cast aluminum door frame has prismatic, impact-resistant, tem- pered glass, drop dish acrylic lens or drop dish polycarbonate lens. Door frame is fully gasketed with one-piece tubular silicone. Optics: KAD reflectors are anodized hydro- formed/ segmented aluminum. Four cutoff dis- tributions available: Type II (Roadway), Type IH(Asymmetric),TypelV(ForwardThrow)and Type V (Symmetric). Reflectors are field-in- terchangeable. KAC reflector is optical-qual- ity aluminum that works in tandem with a light- diffusing prismatic lens. Ballast/Electrical System: Ballast is high- reactance, high power factor (70-1 BOW HPS) or high power factor constant-wattage au- totransformer (175-400W MH & HPS). Ballast is copper wound and 100% factory tested. Finish: Dark bronze polyester powder finish (DDB) is standard with other architectural colors available. Socket: Porcelain, horizontally (position) oriented mogul base socket with copper al- loy, nickel-plated screw shell and center con- tact. UL listed 1500W-600V. 4KV pulse rated. Listings: UL listed for wet locations. Listed and labeled to comply with Canadian Stan- dards (see options). 246 Arm-Mounted Cutoff, Flat Lens Use for parking areas, street lighting, walkways and car lots. Catalog Number Designation HIGH PRESSURE SODIUM 70W KAD 70S 100W KAD 100S 150W KAD 150S 250W KAD 250S 400W KAD 400S METAL HALIDE 100W KAD 100M 150W KAD 150M 1 175W KAD 175M 200W KAD 200M 2 250W KAD 250M 1 320W KAD 320M 2 350W KAD 350M 2 400W KAD 400M 1 HIGH PRESSURE SODIUM 150W KAC 150S 250W KAC 250S 400W KAC 400S METAL HALIDE 150W KAC 150M 1 175W KAC 175M 200W KAC 200M 2 250W KAC 250M 1 320W KAC 320M 2 350W KAC 350M 2 400W KAC 400M 1 1 Distribution (select one) R2 R3 R4 R5S Voltage R2 R3 R4 R5S 12Q R2 R3 R4 R5S 2083 R2 R3 R4 R5S riiii" R2 R3 R4 R5S 277 347 R2 R3 R4 R5 480 3 R2 R3 R4 R5 TB 4 R2 R3 R4 R5 R2 R3 R4 R5 R2 R3 R4 R5 R2 R3 R4 R5 R2 R3 R4 RS R2 R3 R4 R5 FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP = Flat prismatic lens (C73T) DPA = Drop prismatic lens (acrylic) DPP = Drop prismatic lens (polycarbonate) Example: KAD 400M R3 120 SPD09 Mounting SPD04 Square pole arm 5 SPD09 Square pole arm RPD04 Round pole arm 5 RPD09 Round pole arm WWD04 Wood pole or wall 5 WWD09 Wood pole or wall WBD04 Wall bracket WBD09 Wall bracket I/Arm Less Arm (When ordering KMA, DAD12) Options/Accessories SCWA Super CWA pulse start ballast (TB std.) LLRPSL Low loss reactor pulse start ballast (277V only) For additional options and accessories, see page 312. NOTES: 1 May be ordered with SCWA or LLRPSL. 2 Must be ordered with SCWA or LLRPSL. 3 Consult factory for availability in Canada. 4 Multi-tap ballast (120, 277,347V). 5 SPD09,RPD09orWWD09mustbe used when luminairesareoriented on a DM29, DM39 or DM49 drilling pattern. 6 Includesmountingarm. CANADIAN SHIPMENTS: AddCSAas suffixto catalog number. KAC KAD STANDARD PACKAGING Fixtures ship complete in unit cartons only. Example: (Qty 13) KAD 400M R3 120 SPD09 KAC 400M FP 120 SPD09 (13 cartons of 1 fixture) Accessories ship separately. DIMENSIONS EPA 6 : 1.2ft. 2 Length: 17V4I44.5) Width:17ya(44.5) Depth:7VM18.1) DIMENSIONS EPA 6 : FP option 1.2 ft- 2 (.11m 2 ) DP option 1.4 ft 2 (.13m 2 ) Length: 17V2 (44.5) Width: 17'/2 (44.5) Depth: FP option 7y«(18.1) DP option 11'/a(28.3) PSG6 Max. weight: 42lbs.(19.1 kg) Max.weight: 40lbs.(18.1 kg) All dimensions are inches (centimeters) unless otherwise specified. f* L/THON/A L/BHT/NG
3

Arm-Mounted Cutoff, Flat Lens KAD/KAC Use for parking ... · PDF fileFP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP ... Fixtures ship complete in unit cartons only. Example:

Mar 25, 2018

Download

Documents

vuongkhue
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Arm-Mounted Cutoff, Flat Lens KAD/KAC Use for parking ... · PDF fileFP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP ... Fixtures ship complete in unit cartons only. Example:

Area Lighting

KAD/KACContour" Series

KAD

Features KAC

Housing: Rugged, die-cast, soft-corner alu-minum housing with 0.12" nominal wall thick-ness. Extruded 4" soft corner arm for pole orwall mounting is standard. Dark bronze poly-ester powder finish is standard with otherarchitectural colors available.

Door Frame: KAD die-cast door frame hasimpact-resistant, tempered glass lens whichis fully gasketed with one-piece bonded tu-bular silicone. KAC die-cast aluminum doorframe has prismatic, impact-resistant, tem-pered glass, drop dish acrylic lens or dropdish polycarbonate lens. Door frame is fullygasketed with one-piece tubular silicone.

Optics: KAD reflectors are anodized hydro-formed/ segmented aluminum. Four cutoff dis-tributions available: Type II (Roadway), TypeIH(Asymmetric),TypelV(ForwardThrow)andType V (Symmetric). Reflectors are field-in-terchangeable. KAC reflector is optical-qual-ity aluminum that works in tandem with a light-diffusing prismatic lens.

Ballast/Electrical System: Ballast is high-reactance, high power factor (70-1 BOW HPS)or high power factor constant-wattage au-totransformer (175-400W MH & HPS). Ballastis copper wound and 100% factory tested.

Finish: Dark bronze polyester powder finish(DDB) is standard with other architecturalcolors available.

Socket: Porcelain, horizontally (position)oriented mogul base socket with copper al-loy, nickel-plated screw shell and center con-tact. UL listed 1500W-600V. 4KV pulse rated.

Listings: UL listed for wet locations. Listedand labeled to comply with Canadian Stan-dards (see options).

246

Arm-Mounted Cutoff, Flat LensUse for parking areas, street lighting, walkways and car lots.

Catalog Number

DesignationHIGH PRESSURE SODIUM

70W KAD 70S100W KAD 100S1 5 0 W KAD 150S250W KAD 250S400W KAD 400S

METAL HALIDE100W KAD 100M150W KAD 150M1

175W KAD 175M200W KAD 200M2

250W KAD 250M1

320W KAD 320M2

350W KAD 350M2

400W KAD 400M1

HIGH PRESSURE SODIUM150W KAC 150S250W KAC 250S400W KAC 400S

METAL HALIDE150W KAC 150M1

175W KAC 175M200W KAC 200M2

250W KAC 250M1

320W KAC 320M2

350W KAC 350M2

400W KAC 400M1

1Distribution(select one)

R2 R3 R4 R5S VoltageR2 R3 R4 R5S 12QR2 R3 R4 R5S 2083R2 R3 R4 R5S riiii"

R2 R3 R4 R5S 277347

R2 R3 R4 R5 4803

R2 R3 R4 R5 TB4

R2 R3 R4 R5R2 R3 R4 R5R2 R3 R4 R5R2 R3 R4 R5R2 R3 R4 RSR2 R3 R4 R5

FP DPA DPPFP DPA DPPFP DPA DPP

FP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPP

FP = Flat prismatic lens (C73T)DPA = Drop prismatic lens (acrylic)DPP = Drop prismatic lens (polycarbonate)

Example: KAD 400M R3 120 SPD09

MountingSPD04 Square pole arm5

SPD09 Square pole armRPD04 Round pole arm5

RPD09 Round pole armWWD04 Wood pole or wall5

WWD09 Wood pole or wallWBD04 Wall bracketWBD09 Wall bracket

I/Arm Less Arm (Whenordering KMA,D A D 1 2 )

Options/AccessoriesSCWA Super CWA pulse start

ballast (TB std.)LLRPSL Low loss reactor pulse

start ballast (277V only)

For additional options andaccessories, see page 312.

NOTES:1 May be ordered with SCWA or

LLRPSL.2 Must be ordered with SCWA or

LLRPSL.3 Consult factory for availability in

Canada.4 Multi-tap ballast (120, 277,347V).5 SPD09,RPD09orWWD09mustbe

used when luminairesareorientedon a DM29, DM39 or DM49 drillingpattern.

6 Includesmountingarm.CANADIAN SHIPMENTS: AddCSAassuffixto catalog number.

KAC

KAD

STANDARD PACKAGINGFixtures ship complete in unit cartonsonly. Example:(Qty 13) KAD 400M R3 120 SPD09

KAC 400M FP 120 SPD09(13 cartons of 1 f ixture)

Accessor ies ship separately.

DIMENSIONSEPA6: 1.2ft.2

Length: 17V4I44.5)Width:17ya(44.5)Depth:7VM18.1)

DIMENSIONSEPA6: FP option 1.2 ft-2 ( .11m2)

DP option 1.4 ft2 (.13m2)Length: 17V2 (44.5)Width: 17'/2 (44.5)Depth: FP option 7y«(18.1)

DP option 11 ' / a (28.3)

PSG6

Max. weight: 42lbs. (19.1 kg) Max.weight: 40lbs.(18.1 kg)

All dimensions are inches (centimeters)unless otherwise specified.

f* L/THON/A L/BHT/NG

Page 2: Arm-Mounted Cutoff, Flat Lens KAD/KAC Use for parking ... · PDF fileFP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP ... Fixtures ship complete in unit cartons only. Example:

II I ILighting

ArchitecturalGeneral Purpose

OutdoorLighting

Lithonia's distinctive designs, signature ac-cents and high-performance optical systemscombine to provide a performance and stylingselection unmatched in the industry.

Lithonia features high-quality products thatare characterized by superior-grade materialsfor reliability, highly engineered designs forperformance and skilled craftsmanship foraesthetic styling.

Area/ Street Lighting......................... 242Floodlighting....................................... 256Wall-Paks ...........................................266Pathway/Accent Lighting................. 272Decorative Post Tops ....................... 279Parking Garage Lighting ..................280Sportslighting..................................... 283Wind Map .........irt,*,.rt........................286Poles ..„.«„.,„............;.......................... 287Outdoor Options & Accessories .....312Antique Street Lamps .......................321Hydrel..................................................343

f* t/THON/A L/GHT/NB PSG6 241

Page 3: Arm-Mounted Cutoff, Flat Lens KAD/KAC Use for parking ... · PDF fileFP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP FP DPA DPP ... Fixtures ship complete in unit cartons only. Example:

Catalog Number

Architectural Ceiling/Wall MountedCompact Fluorescent

Example: VGR1C 50M 120 DWHG SF LPI

1Series

Low Profile (ADA)VGR1C 3.7" DeepVGR2C 3.7" Deep

ILamp type

Twin-tube(s)'13TT2/1 3TT

Double twin-tube(s)13DTT2

2/13DTT18DTT2/18DTT26DTT

Triple-tube(s),26TRT32TRT42TRT

High Pressure Sodium

70s

IVoltage

120, 208, 240,277, 347,uiuni T4IVIVUL 1

Paint Options5

Standard Textured Colors:DWHG WhiteDBLB BlackDBNH Dark Bronze

Optional Textured Colors:DSPD Dark GrayDSPJ Light GrayDSPE GreenDSPG Dark RedDSPF RustDSPH Red

Lamps9

LPI Lamp(s)included

(standard)L/LP Less

Lamp(s)

50fVT70M3

Lamp/Fixture DataWattage Ballast

FLUORESCENT

WeightLbs

13W Electromagnetic, NPF8.5018W Electronic, HPF26W Electronic, HPF32W Electronic, HPF42W Electronic, HPF

HIGH PRESSURE SODIUMBOW HX-HPF70W HX-HPF

METAL HALIDE50W HX-HPF70W HX-HPF

8.508.508.508.55

16.3012.80

11.4012.80

Lamp Base

GX23G24q-2

G/GX24q-3G24q-3

GX24q-4

Med.Med.

Med.Med.

DIMENSIONSAll dimensions are inches (centimeters).

VGR1C

OptionsDF Double fuse (208V, 240V)5

EC Emergency circuitGLR Internal fast-blow fusing6

GMF Internal slow-blow fusing6

NL Night-light (15W Max.)7

PE Photoelectric cellQRS Quartz restrike system5

SF Single fuse (120V, 277V)5

TRS Tamper-resistant screws8

CSA Listed and labeled to comply withCanadian Standards

NOTES:1 120Vonly.2 Notavailablewith347V.3 Low UV lamp is included and recommended for

replacement.4 Optional multi-volt electronic ballast (forTRT

lamps) capable of operating on any line voltagefrom 120V to 277V.

5 Option available for HID units.6 Option available for compact fluorescent.7 Option available for single lamp units only.8 T-20 screws with center reject pin.9 Lamp included unless L/LP isspecified.

Accessories /Order as separate catalog numbers.)Cat. No. DescriptionRK1 T10DRV Torx TX10 screwdriver, for use with

Gateway set screws.

RK1 T20BIT Hex-base driver bit, Torx TX20, for tamper-resistant screws with center reject pin.

RK1T20DRV TorxTX20screwdriver,forusewithtamper-resistant screws (TRS option).

VGR2C

3.7"(34.8) I9.4)

Rough Service Lighting

VGR1CVG R2C

Gateway Series™

(34.8)

f* L/THONIA UCHT/NG PSG6

Bezel: One-piece, die-cast aluminum, lowcopper alloy. Bezel encloses lens and se-cures to housing with stainless steel Torx®T10 set screws (two included).

Finish: Standard finish is textured polyesterpowder coat in white, black or bronze. Option-al architectural colors available.

Lens: Translucent white, injection-molded,UV-stabilized polycarbonate lens, .125" thick.Smooth exterior for easy cleaning. Interiorpattern diffuses light for smooth surface illu-mination.

Housing: One-piece, die-cast aluminum, lowcopper alloy. Post-painted in polyester pow-der coat. Use four-hole mounting pattern formaximum vandal resistance.

Reflector: HID Reflector is semi-specular alu-minum. CFL reflectors are finished in high-gloss white powder coat.

Lamps: Included unless L/LP is specified.

Gasket: Perimeter lens gasket is one-piecesilicone "0" ring. Pad mounting gasket(closed-cel l neoprene) seals housing tomounting surface.

Ballast: HID: High reactance, high power fac-tor. Starting temperature -20°F (-29°C) for MHand -40°F for HPS. UL-recognized component.CFL: Class P, electronic, high power factor,starting temperature 0°F (-18°C). Exception:13TT is electromagnetic, normal power fac-tor, 120V only.

Sockets: CFL: High-temperature thermoplas-tic with lamp retention clip. HID: medium-base porcelain, UL listed 660W, 600V, 4KVpulse rated.

Listings: HID: UL 1572 listed. CFL: UL 1570 list-ed for wet locations. Listed and labeled tocomply with Canadian Standards. _