Optimal County Limit POTABLE WATER RECLAIMED WATER WASTEWATER (Gravity) WASTEWATER (Force Main) WASTEWATER (Pump Station) Manufacturer Part Name / Number - - Yes - - U.S. Foundry USF 227-SO Yes Yes - Yes - U.S. Foundry USF 227-AS ` - - - - Yes U.S. Foundry USF 105-M - - - Yes - SouthEastern Distributors MB-17S HILLS-BL - - - Yes - DFW Plastics, Inc DFW37C-SARVHILLS - - - - - - - - Yes - SouthEastern Distributors MB-17S HILLS-L - - - Yes - DFW Plastics, Inc DFW37C-SARV-LIDHILLS - - - Yes - DFW Plastics, Inc DFW37C-KSARV-LIDHILLS - - - Yes - SouthEastern Distributors MB-17 HILLS-B - - - Yes - DFW Plastics, Inc DFW37C-BODY HILLS - - - Yes - Carson Industries MSCBCF 1118-12 FL HILLS - - - - - Yes - - - - SouthEastern Distributors MB-17 HILLS-BL - Yes - - - SouthEastern Distributors MB-17R HILLS-BL Yes - - - - DFW Plastics, Inc DFW37C-SBSM HILLS - Yes - - - DFW Plastics, Inc DFW37C-SPSM HILLS - - - - - Yes - - - - SouthEastern Distributors MB-17 HILLS-L - Yes - - - SouthEastern Distributors MB-17R HILLS-L Yes - - - - DFW Plastics, Inc DFW37C-SBSM-LID HILLS Yes - - - - DFW Plastics, Inc DFW37C-KSBSM-LID HILLS - Yes - - - DFW Plastics, Inc DFW37C-SPSM-LID HILLS - Yes - - - DFW Plastics, Inc DFW37C-KSPSM-LID HILLS Potable-->Black Black with lid lettering "Hillsborough County Sewer ARV" Reclaimed-->Pantone 522C Potable-->Black. Locking Lid, to be used by design exception only. Reclaimed-->Pantone 522C Reclaimed-->Pantone 522C Reclaimed-->Pantone 522C. Locking Lid, to be used by design exception only. "AIR RELEASE" on cover (POR-15 coating required for sanitary sewer) LPSS use only. "SANITARY SEWER" on cover. (POR-15 coating required.) Potable-->Black Potable-->Black Wastewater-->Black Wastewater-->Black Black with lid lettering "Hillsborough County Sewer ARV" Important Notes and Stipulations "Year, Hillsborough County Florida, Sanitary Sewer" and HC logo on cover (POR-15 Coating required for Force Main dumping into Gravity) Potable-->Black Access Boxes, Doors, Frames and Accessories Lids Single Service Wastewater Force Main Air Release Valve Vent Box Combo (Box & Lid) Lids Water Meter Boxes Base Boxes Combo (Base & Lid) Access Rings and Covers No Limit No Limit Reclaimed-->Pantone 522C No Limit Black with lettering "Hillsborough County Sewer ARV" Black with lettering "Hillsborough County Sewer ARV" Locking Lid, to be used by design exception only. Wastewater-->Black Black with lettering "Hillsborough County Sewer ARV" No Limit No Limit No Limit ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements. Appendix B--Page 1 of 16 Hillsborough County Public Utilities Department (HC-PUD) Approved Products & Materials
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Black with lid lettering "Hillsborough County Sewer ARV"
Reclaimed-->Pantone 522C
Potable-->Black. Locking Lid, to be used by design exception only.
Reclaimed-->Pantone 522C
Reclaimed-->Pantone 522CReclaimed-->Pantone 522C. Locking Lid, to be used by design exception
only.
"AIR RELEASE" on cover (POR-15 coating required for sanitary sewer)
LPSS use only. "SANITARY SEWER" on cover. (POR-15 coating required.)
Potable-->Black
Potable-->Black
Wastewater-->Black
Wastewater-->Black
Black with lid lettering "Hillsborough County Sewer ARV"
Important Notes and Stipulations
"Year, Hillsborough County Florida, Sanitary Sewer" and HC logo on cover (POR-15 Coating required for Force Main dumping into Gravity)
Potable-->Black
Acc
ess
Box
es, D
oors
, Fra
mes
and
Acc
esso
ries
Lids
Sin
gle
Ser
vice
Was
tew
ater
For
ce M
ain
Air
Rel
ease
V
alve
Ven
t Box
Com
bo
(Box
& L
id)
Lids
Wat
er M
eter
Box
es
Bas
e B
oxes
Com
bo (B
ase
&
Lid)
Access Rings and Covers
No
Lim
itN
o Li
mit
Reclaimed-->Pantone 522C
No
Lim
it Black with lettering "Hillsborough County Sewer ARV"
Black with lettering "Hillsborough County Sewer ARV" Locking Lid, to beused by design exception only.
Wastewater-->Black
Black with lettering "Hillsborough County Sewer ARV"
No
Lim
itN
o Li
mit
No
Lim
it
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 1 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes Yes Yes - U.S. Foundry Type A: Steel Adjusting Rings
- - - - -
Yes Yes Yes Yes Yes Tyler / Union 6850 Series
Yes Yes Yes Yes Yes Sigma / Russell Pipe Company
Yes Yes Yes Yes Yes Star Pipe Products
- - - - -
Potable-->Black. Locking Lid, to be used by design exception only.
Potable-->Black
Reclaimed-->Pantone 522C
Potable-->Black
Screw Type With Base and Lid
Reclaimed-->Pantone 522C
Potable-->Black
Reclaimed-->Pantone 522C
Reclaimed-->Pantone 522C Reclaimed-->Pantone 522C. Locking Lid, to be used by design exception
only.
Potable-->Black
Potable-->Black
Approved for Traffic & Non-traffic applications. Shall be installed using abutyl sealant meeting ASTM C-990 per mfg. instructions.
Potable-->Black
Potable-->Black
Potable-->Black
Reclaimed-->Pantone 522C
Potable-->Black
Reclaimed-->Pantone 522C
POR-15 Coating for sewer ARV and Force Main dumping into Gravity
Screw Type With Base and Lid
Screw Type With Base and Lid
Potable-->Black
Reclaimed-->Pantone 522C
Reclaimed-->Pantone 522C
Reclaimed-->Pantone 522C
Reclaimed-->Pantone 522C
Bas
e B
oxes
Valve Box and Cover
Manhole Cover and Cone Casting Grade Adjusting Rings
No
Lim
it
Wat
er M
eter
Box
es
Dua
l Ser
ivce Lids
Com
bo (B
ox
&Li
d)B
ase
Box
es
No
Lim
itN
o Li
mit
No
Lim
itN
o Li
mit
Acc
ess
Box
es, D
oors
, Fra
mes
and
Acc
esso
ries
No
Lim
it
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 2 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
- - - - Yes Halliday Products, Inc Series S-R
- - - - Yes Water / Wastewater Systems, Inc.
- - - - -
Yes - - - - Wilkins 975XL2
Yes - - - - Wilkins 375XL/ 375AXL
Yes - - - - Ford Meter Box Company INC HHS31-323-K
- - - - -
Yes Yes Yes Yes - Cascade CCS
Yes Yes Yes Yes - Pipeline Seal and Insulator Inc C12G-2
Yes Yes Yes Yes - RACI S/T to P/Q (1.18" to 23.23")
Marking Tape (4.5 mil Thickness & 2" Width minimum)
Wetwell Access and Frames (Hinged on discharge piping side)
Backflow Prevention Assemblies & Devices (For Hillsborough County
owned & maintained assets)
304 Stainless Steel required on hydrant external and bonnet internal hardware and extension kit hardware.
304 Stainless Steel required on hydrant external and bonnet internal hardware and extension kit hardware.
304 Stainless Steel required on hydrant external and bonnet internal hardware and extension kit hardware.
304 Stainless Steel required on hydrant external and bonnet internal hardware and extension kit hardware.
304 Stainless Steel required on hydrant external and bonnet internal hardware and extension kit hardware.
4N
o Li
mit
5N
o Li
mit
No
Lim
it
Casing Spacers
Fire Hydrants
Stainless Steel (8" to 48")
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 3 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Potable-->Must be NSF-61 stamped and approvedPotable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
No
Lim
it Potable-->Must be NSF-61 stamped and approvedPotable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approvedPotable-->Must be NSF-61 stamped and approved
No
Lim
it
Potable-->Must be NSF-61 stamped and approved
No
Lim
itN
o Li
mit
No
Lim
it
3"
1-1/2"
1"
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approvedPotable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approvedPotable-->Must be NSF-61 stamped and approved
Reclaim Only
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approvedPotable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
No
Lim
itPotable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
5/8" x 3/4"
Potable-->Must be NSF-61 stamped and approved
With Double Check Backflow
Meter, 3/4"
2"
Flow
Met
ers
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 4 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes - - - Sensus Metering Systems W-5500 Turbo
- - - - -
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
No
Lim
itN
o Li
mit
No
Lim
it
8"
10"
No
Lim
itN
o Li
mit
6"
Fireline 4" & Up
Potable-->Must be NSF-61 stamped and approved
4"-12". Must be UL, FM & NSF-61 approved.
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
4"-10". Must be UL, FM & NSF-61 approved.
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved
Potable-->Must be NSF-61 stamped and approved4"
Flow
Met
ers
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 5 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Manufacturer Product
- - Yes - Yes IET SystemsIET System 3: DS-101(min 5 mils dft)/ DS-301(min 125 mils
Plastic Composites, Inc, Exceletech Coatings and Applications, and Universal Painting Corp.
Paints and Coatings: Carl Laquidara (Mfgr. Rep)
Flexible Manhole to Pipe Connectors
Manhole Frame and Cover Protective Paint
No
Lim
it
Cor
rosi
on P
rote
ctio
n Sy
stem
s
No
Lim
itN
o Li
mit
No
Lim
itPlastic Composites, Inc
Associated Approved Applicators
Paints and Coatings: Carl Laquidara (Mfgr. Rep)
Leak
, Wat
er P
roof
ing
and
Cor
rosi
on P
rote
ctio
n
Rehabilitation Applications
New Applications
Plastic Composites, Inc, Exceletech Coatings and Applications, and Universal Painting Corp.
Plastic Composites, Inc
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 6 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Endura-Shield II Acrylic Aliphatic Polyurethane, use with 27WB primer.
Push-On gasket Tyton/ Fastite.
High Performance Alkyd
4" to 42"
Typoxy Inorganic Hybrid Water-Based Epoxy
High Performance Alkyd
High Performance Waterborne Acrylic Semi-Gloss Enamel, use with 4020PF primer
Applied at 40 mils thick nominal by a certified applicator. Required for allsanitary sewer applications. See Induron website for special handling
considerations.
Push-On gasket Fastite.
Industrial Alkyd enamel, use with B50XXX primer.
Alkyd high gloss enamel, use with 573 primer.
Alkyd Industrial Gloss Enamel, use with 4160 primer
Push-On gasket Tyton.
Premium Quality Waterborne Acrylic
With Mfg Restrained Joint
Pipi
ng It
ems
Interior Ceramic Epoxy Coatings (For Ductile Iron Pipes
and Fittings)
No
Lim
itN
o Li
mit
No
Lim
it
Rust Inhibitive Field Primer (Exterior)
ctile
Iron
Pip
e (C
eram
ic E
poxy
Coa
ting
requ
ired
for S
anita
ry S
ewer
App
licat
ions
) Push-On, Flanged, and Mech Joint
(4" & up)
No
Lim
it
Finish (Exterior)
Pain
ting
Mat
eria
ls fo
r Aer
ial/
Abo
ve G
rade
Pip
ing,
Fi
tting
s, a
nd V
alve
s
No
Lim
it
Push-On gasket Tyton.
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 7 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Underground Solutions is a contract manufactured brand (Must have a PRC approved Manufacturer's Stamp on pipe--listed above). Approved
4"-30".
PE 3608 SDR 9
Specify appropriate pipe color for service.
Specify appropriate pipe color for service.
Specify appropriate pipe color for service.
PE 4710 SDR 9
PE 3608 SDR 9
Black tube. Must be marked in field per spec for applicable service. PE4710 SDR 9
Polyethylene Pipe, 1" & 2" (AWWA C901)
Pipi
ng It
ems
(Con
tinue
d)
14" and Above (AWWA C905)
With Mfg Restrained Joint
PVC
Pip
e (A
ppro
ved
SDR
in T
echn
ical
Spe
cific
atio
ns)
4" to 15" (ASTM D 3034)
No
No
Lim
itN
o Li
mit
No
Lim
itN
o Li
mit
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 8 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Owner
Rectangle
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes - Yes Yes U.S. Pipe Company
Yes Yes - Yes Yes Sigma / Russell Pipe Company
Yes Yes - Yes Yes American Ductile Iron Pipe Company
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 9 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes - Yes - American Flow Control Series 2800
Yes Yes - Yes American Flow Control Series 1004
Yes Yes - Yes - Mueller Co. H-615
Yes Yes - Yes - Tyler/Union
Yes Yes - Yes - Mueller Co. H-304SS
Yes Yes - Yes - JCM Industries 432
Yes Yes - Yes - Cascade CST-EX
Yes Yes - Yes - Smith-Blair (Sensus) 622
Yes Yes - Yes - JCM Industries 412 ESS
Yes Yes - Yes - Ford Meter Box Company INC FTSC
- - - - -
Yes Yes - Yes - U.S. Pipe Company TR Flex Gripper Ring
Yes Yes - Yes - EBAA Iron Company MegaLug 1100 Series
Yes Yes - Yes - EBAA Iron Company 1600TD
Yes Yes - Yes - Romac Industries Grip Ring
Yes Yes - Yes - Star Pipe Products StarGrip (3000) Series
Yes Yes - Yes - Ford Meter Box Company Inc. UFR 1400 Series
Yes Yes - Yes - Sigma One-Lok SLDE Series
- - - - -Yes Yes - Yes - Ford Meter Box Company Inc. UFR 1350 Series
Yes Yes - Yes - Ford Meter Box Company Inc. UFR 1390 Series
Yes Yes - Yes - EBAA Iron Company 1600 (& 1600TD) Series
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 10 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes - Yes - Ford Meter Box Company Inc. UFR 1300 Series
Yes Yes - Yes - EBAA Iron Company 2000 PV
Yes Yes - Yes - EBAA Iron Company 1600TD
Yes Yes - Yes - JCM Industries 610
Yes Yes - Yes - Romac Industries Grip Ring
Yes Yes - Yes - Sigma PV-Lok PWM Series
Yes Yes - Yes - Sigma One-Lock SLCE Series
Yes Yes - Yes Ford Meter Box Company Inc. UFR 1500 Series
- - - - Yes Jamesbury Corporation (Metso Automation) Full Bore Series 9000
- - - - -
Full port, ANSI Class 150 FlangedGrinder Pump Stations: For discharge piping isolation
Typically 2"
4" to 12"
4" to 12"
4" to 12"
2" to 48"
2N
o Li
mit
No
Lim
it3
Rejected Models: S4P
No
Lim
it
Air-Release Valve.
Air-Release Valve.
Air-Release Valve. CI body, fusion bonded epoxy coated interior and exterior, SST hardware and trim.
Combination Air Valve.
Full port Female IP (NPT) Inlet and OutletPump stations: For discharge piping gauge port isolationForce mains: For ARV isolation and/or pressure release
Typically 1" and 2"
Full Port Female IP (NPT) Inlet and OutletPump Stations; For discharge piping gauge port isolation
Approved up to 1/2".
Combination Air Valve. Vacuum check valve required (D-025-POW) unless a major vacuum condition exists and is specified by the design
engineer via a design exception. Reinforced Nylon body, SST Hardwareand trim.
Subm
ersi
ble
Pum
psVa
lves
Pipi
ng
Air-Release and Combination Air Valves
PVC - Ductile Iron (MJ)
Grinder Pumps
Join
t R
Non-Clog Type
Ball Valves Ball stem and Body shall be 316 Stainless Steel, non-lubricated free-floating ball type, full port. Handle, nuts and washers shall be
300 series Stainless Steel
4" to 12"4" to 36"
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 11 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
2"-36". XX represents size. HC represents stainless steel cover bolts, disc position indicator, and backflow actuator. Resilient hinge arm style.
14" and up. Resilient to bronze seat.
8" to 14"
Cast Iron, NRS, Flanged
2" to 12". Bronze to bronze seat.
Ductile or Cast Iron, NRS or OS&Y (No OS&Y at Pump Station) Not for potable water use, not NSF-61 listed.
Cast Iron, OS&Y, NPT
Cast Iron, NRS, NPT
Cast Iron, NRS, NPT
Ductile Iron, NRS or OS&Y (No OS&Y at Pump Station)
Cast Iron, OS&Y, Flanged
No
Lim
itN
o Li
mit
Valv
es (c
ontin
ued)
2" & larger
Gat
e V
alve
s (R
esilie
nt S
eate
d C
509
& C
515)
2" to 3"
Che
ck V
alve
s (M
etal
&
Res
ilient
Hin
ge A
rm)
Cast Iron, OS&Y, NPT
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 12 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes - - - Mueller Co. A-2360-20/ -23
Yes Yes - - - U.S. Pipe Company A-USP0-20/ -23Yes Yes - - Yes Mueller Co. A-2361-77
- - - - Yes Mueller Co. A-2360-6- - - - Yes U.S. Pipe Company A-USP0-6
Yes Yes - - - Mueller Co. R-2360-6Yes Yes - - - U.S. Pipe Company R-USP0-6
- - - - -Yes - - - - Ford Meter Box Company INC FB 1700-7-NLYes - - - - Mueller Co. B20046NYes Yes - - - Ford Meter Box Company INC F-1100-X NL (Entire Line)Yes Yes - - - Ford Meter Box Company INC FB-1100-X NL (Entire Line)Yes Yes - - - Mueller Co. P15008NYes Yes - - - Mueller Co. P25008NYes Yes - - - Mueller Co. P15028NYes Yes - - - Mueller Co. P25028N
- - - - -
Yes Yes - - Ford Meter Box Company INC B41-XXXW-NL(Entire Line)
- - - - -- - - - -
Plug--[Male AWWA IP Thread Inlet] x [CTS Tubing Outlet]Ball--[Male AWWA IP Thread Inlet] x [CTS Tubing Outlet]
Ball--[Male AWWA IP Thread Inlet] x [Threaded Female IP Outlet]
Plug--[Male AWWA Taper Thread Inlet] x [CTS Tubing Outlet]Plug--[Male AWWA IP Thread Inlet] x [CTS Tubing Outlet]Plug--[Male AWWA IP Thread Inlet] x [CTS Tubing Outlet]
Ductile or Cast Iron, NRS or OS&Y (No OS&Y at Pump Station)
Ductile Iron, NRS or OS&Y (No OS&Y at Pump Station)4" to 12"
Gat
e V
alve
s (R
esilie
nt S
eate
d C
509
& C
515)
14" & larger
No
Lim
itN
o Li
mit
Ductile Iron, NRS or OS&Y (No OS&Y at Pump Station)
Cast Iron, NRS, MJ
Cast Iron, NRS, Flanged
Plug--[Male AWWA Taper Thread Inlet] x [CTS Tubing Outlet]
No
Lim
it
Cast Iron, NRS
Ductile Iron, NRS, Aquagrip
Valv
es (c
ontin
ued)
Ball--[Male AWWA IP Thread Inlet] x [Threaded Female IP Outlet]
No
Lim
it
Curb Stops
Corporation Stops (Compression or Packed Joint)
Ductile Iron, NRS or OS&Y (No OS&Y at Pump Station).
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 13 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes - - - - Ford Meter Box Company INC B43-XXXW-NL (Entire Line)- Yes - - - Ford Meter Box Company INC BRW 43-XXXW-NL (Entire Line)
Yes Yes - - - Mueller Co. P24350N
- - - - -
Yes Yes - - - Ford Meter Box Company INC KV43-342W-NL
- - - - -
Yes - - - - Ford Meter Box Company INC Assembly:UV43-42W-NL
- Yes - - - Ford Meter Box Company INC Assembly:UVBRW43-42W
Yes Yes - - - Mueller Co.Must be ordered as Assembly
Two H14265NOne P15363N
- - - - -
- - - Yes - Milliken Valve Company All Eccentric Plug Valves
- - - Yes - Henry Pratt Company Ballcentric Plug Valves
- - - Yes - Dezurik PEF
2 Key Angle Valve [Female IP Inlet] X [Meter Swivel Nut Outlet]Branch Pipes [CTS Tubing Inlet] x [2 Male AWWA IP Outlets]
No
Lim
itN
o Li
mit
3
Plug
Val
ves
Mus
t hav
e in
tern
al a
nd e
xter
nal e
poxy
coa
ting
10 m
ils m
inim
um. V
alve
s an
d ge
arin
g sh
all b
e ra
ted
for a
min
imum
of 1
50 p
si a
nd s
hall
prov
ide
drip
-tigh
tsh
ut o
ff w
ith th
is p
ress
ure
in e
ither
dire
ctio
n. 3
"-12
" rou
nd p
ort,
14"-
36"
rect
angu
lar p
ort a
rea
mus
t equ
al 1
00%
of p
ipe
area
, 304
sta
inle
ss s
teel
exte
rnal
har
dwar
e re
quire
d. I
nspe
ctor
s m
ay re
ques
t pac
king
slip
to v
erify
sp
ecifi
catio
ns o
n th
e jo
b si
te.
For w
aste
wat
er, s
eat-e
nd m
ust f
ace
into
the
dire
ctio
n of
pre
dom
inan
t flo
w.
Angle Service
Valv
es (c
ontin
ued)
Ball--[CTS Tubing Inlet] x [Meter Swivel Nut Outlet]
2 Key Angle Valve [Female IP Inlet] X [Meter Swivel Nut Outlet]Branch Pipes [CTS Tubing Inlet] x [2 Male AWWA IP Outlets]
Met
er V
alve
s
Branched or Dual Service
No
Lim
it
Ball--[CTS Tubing Inlet] x [Meter Swivel Nut Outlet]
Key--[CTS Tubing Inlet] x [Meter Swivel Nut Outlet]
Single Service Plug--[CTS Tubing Inlet] x [Meter Swivel Nut Outlet]
(Installed Only as Assembly)2 Key Angle Valves [Female IP Inlet] X [Meter Swivel Nut Outlet]
Branch Pipes [CTS Tubing Inlet] x [2 Male AWWA IP Outlets]
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 14 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Yes Yes - Yes Yes M&H Valve Co. (McWane) 4751
Yes Yes - Yes Yes Clow Valve Co. (McWane) F-6114
Yes Yes - Yes Yes Mueller Co. T-2360-16
Yes Yes - Yes Yes U.S. Pipe Company T-USP0-16
Yes Yes - Yes Yes American Flow Control 2500 Series
Yes Yes - Yes Yes American Flow Control 2500 Series
Yes Yes - Yes Yes Clow Valve Co. (McWane) F-6112
Yes Yes - Yes Yes Mueller Co. T-2361-16
Yes Yes - Yes Yes U.S. Pipe Company T-USP1-16
- - - - -
Yes Yes - Yes - U.S. Pipe Company Field Lok 350 Gasket
Yes Yes - Yes - American Ductile Iron Pipe Company Fast-Grip Gasket
4" to 12" (Requires Prior HCWRD Engineering Approval, Not for directional drill, above grade requires special consideration) Review
assembly instructions before use.
4" to 12" (Requires Prior HCWRD Engineering Approval, Not for directional drill or above grade use) Review assembly instructions
before use.
4" to 12" (Requires Prior HCWRD Engineering Approval, Not for directional drill or above grade use) Review assembly instructions
before use.
Alternative Pipe Restraint
Tapp
ing
Val
ves
16" not approved
16" not approved
No
Lim
it
Must have Ashcroft Diaphragm Seal (50-310SS-02T-XCK) Silicone Filled. If a larger gauge is needed such as the 45, the type 100
diaphragm seal is required.Compound Pressure Gauges Assembly
No
Lim
it
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.
Appendix B--Page 15 of 16
Hillsborough C
ounty Public U
tilities Departm
ent (HC
-PU
D)
Approved P
roducts & M
aterials
thomaskk
Stamp
Opt
imal
Cou
nty
Lim
it
PO
TAB
LE W
ATE
R
RE
CLA
IME
D W
ATE
R
WA
STE
WA
TER
(G
ravi
ty)
WA
STE
WA
TER
(Fo
rce
Mai
n)
WA
STE
WA
TER
(Pu
mp
Stat
ion)
Manufacturer Part Name / Number Important Notes and Stipulations
Grinder stations not included. Used only in special conditions. RequiresHCWRD Engineering Approval.
No
Lim
it
ISSUED 11/17/2011 All materials shall be PRC approved BEFORE the commencement of a bid. The HCWRD PRC reserves the right to remove products in the best interests of the County. HCWRD reserves the right to limit the number of approved manufacturers or any specific type of products for the purpose of minimizing inventory of parts, replacement components, and training requirements.