IOT POLY ENGINEERING 4-09 A 4-bar linkage mechanism has a crank that rotates at a constant angular speed. The crank is connected to the coupler which is connected to the follower. The frame does not move. cran k coupl er followe r fram e KINEMATICS is the branch of physics that studies the motion of a body or a system of bodies without consideration given to its mass or the forces acting on it.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
IOT
POLY ENGINEERING4-09
A 4-bar linkage mechanism has a crank that rotates at a constant angular speed. The crank is connected to the coupler which is connected to the follower. The frame does not move.
crank
coupler
follower
frame
KINEMATICS is the branch of physics that studies the motion of a body or a system of bodies without consideration given to its mass or the forces acting on it.
IOT
POLY ENGINEERING4-09
A Grashof linkage is a planar four-bar linkage withS + L < P + Qwhere S = length of the shortest link L = length of longest link P and Q are the lengths of the two remaining links.1. Crank-Rocker : a Grashof linkage where the shortest link is the input link (crank).
2. Double-Rocker: a Grashof linkage where the shortest link is the floating link (coupler).
3. Rocker-Crank : a Grashof linkage where the shortest link is the output link (follower).
4. Crank-Crank : a Grashof linkage where the shortest link is the ground link (frame).
IOT
POLY ENGINEERING4-09
1. Crank-Rocker : a Grashof linkage where the shortest link is the input link (crank).
IOT
POLY ENGINEERING4-09
2. Double-Rocker: a Grashof linkage where the shortest link is the floating link (coupler).
IOT
POLY ENGINEERING4-09
4. Crank-Crank : a Grashof linkage where the shortest link is the ground link (frame).
IOT
POLY ENGINEERING4-09
A pantograph is a mechanism that is used to create a drawing that is larger or smaller than an original drawing.
The pantograph simulation below creates a drawing that is larger than the original drawing.
IOT
POLY ENGINEERING4-09
A parallel bar mechanism is a mechanism that retains parallelism in its members.
IOT
POLY ENGINEERING4-09
A straight line mechanism is a mechanism that is used to create straight lines. The examples below are Peaucellier mechanisms.
IOT
POLY ENGINEERING4-09
Two more examples of a straight line mechanism are shown below. These are the Tchebicheff mechanism.
IOT
POLY ENGINEERING4-09
Example of a nearly straight line mechanism is shown below. This is the Watt mechanism, invented by James Watt of steam engine fame. If you look closely, you will see that the path deviates from a straight line at the top and the bottom of motion.
IOT
POLY ENGINEERING4-09
This is a SCOTCH YOKE. As the yellow knob rotates, it causes the light gray yoke to move side to side.
Thus, rotational motion has been converted to linear motion.
IOT
POLY ENGINEERING4-09
This is a GENEVA MECHANISM. As the small black knob rotates at a constant rate, it causes the dark gray mechanism to rotate one-sixth of a turn and stop, rotate one-sixth of a turn and stop, etc. The Geneva mechanism on the right side causes one-fourth of a turn movements.
Rotational motion has been converted to sporadic rotational motion.
Related Documents
