Top Banner

Click here to load reader

6

Aluminium grave shuttering - INNO-2000 grafbekisting Uk LR.pdf · One of the most popular shuttering system is the user-friendly ‘stepped’ HONOR shuttering. This lightweight,

Feb 27, 2018

ReportDownload

Documents

letuyen

  • Aluminium grave shuttering

  • One of the most popular shuttering system is the user-friendly stepped HONOR shuttering. This lightweight, aluminium system is robust and ex-tremely strong and consists of atleast one, though usually three shuttering sections, which are very easy to use, either manually or with a mechanical digger. The number of sections re-quired depends on the depth of the grave.

    The term stepped comes from the va-riation in the length and width of the shuttering sections, dimensions which take account of the limited amounts of space available. Ensuring that activities can be carried out easily and safely (manually as well as with mechanical digger), the section with the largest

    dimensions is dug directly into the surface of the ground. The smallest section is added last, at the deepest part of the grave. The smallest section is the last one to be added and is also the first one to be removed. This way the grave is gradually dug deeper in stages, with each stage benefitting from the support and safety of the previous shuttering section. Filling the grave is done safely by first removing the smal-lest, and lowest section, and then back-filling until the soil reaches the bottom of the next section, which is then remo-ved and backfilled, and so on until the grave is filled. Each section consists of four separate components two longi-tudinal sections, plus two end sections, making it very easy to install or remove the shuttering.

    Shuttering systems ensure that the grave does not collapse

    during digging, or worse, at the burial! This keeps both the

    gravediggers and the mourners safe. As you already probably know, Health and Safety has

    drawn up rules and regulations to improve safety in the cemetery.

    In the decades since HONOR first designed its system they have

    been closely linked to the latest technologies, mechanisation,

    working conditions, ergonomics, practical applications, and of

    course your requirements. This has resulted in the HONOR stepped shuttering system,

    which is derived and specifically designed from the original.

    HONOR keeps in close contact with the people using the equip-

    ment and is therefore able to combine your needs and wishes

    with our extensive experience that has accrued since 1948.

    The HONOR system can be supplied with several ascending

    stepped shuttering sections. These ascend from one to three

    sections and can be expanded with an extension section if required.

    Stepped shuttering system

  • Stepped shuttering system Construction As already mentioned, the HONOR shuttering system can be used manu-ally or with a mechanical digger. The lightweight section components are made from double-walled aluminium with integrated reinforcement ribbing and twin handles. All four components of each section are finished with a cut-ting edge developed by HONOR that makes it easier to push the shuttering section through the soil. The whole structure is welded which helps incre-ase its useful lifespan and provides you with many years of reliability. The system uses a unique approach to join the lon-gitudinal and end components together which is done by way of U-shaped guides. Ridges on top of the end com-ponents drop into recesses of the same size on the longitudinal components. The bottom of the end component drops onto a buffer. Thanks to the unique HONOR design it is still very easy, even under great surface pressure caused by soil subsi-dence, to remove the sections either manually or with a mechanical digger.

    Rapid set-up the HONOR soil container

    for convenient storage of soil removed from the grave.

    Combination of the HONOR shuttering, burying equipment and working grid.

    This special ridge and recess design has a multiple function by creating a single shuttering section from four

    separate components. This means that the end components automatically

    release when the shuttering is manually removed during

    propping but when removing with a mechanical digger

    using the HONOR hoisting bar, the ridges carry the end components of the

    shuttering section.

  • The V-ridge in detail. The buffer in detail.

    Grave prop wall

    Cutting edge

    Soil

    The shuttering easily cuts through the soil thanks to the HONOR cutting edge at the bottom.

    TECHNICAL DATA

    Dimensions*:top section (LxB)2,480 x 1,040 mmmiddle section (LxB) 2,340 x 920 mmbottom section (LxB) 2,200 x 800 mm* Can be made to customer specifications

    Available in the following depths:500, 600 & 700 mm

    Working depths:2 deep (with 3 sections) 1 deep (with 2 sections)

    Weights: longitudinal component approx. 22 kg end components approx. 6 kg

    mark approved

    End component

    Longitudinal component

    All parts are welded

    Buffer

    U-shaped

    guide

    V-ridge

    Double-walled plates with integrated reinforcement ribbing

    Integrated, twin handles

    Cutting edge

    Lightweight, aluminium HONOR shuttering

    The ergonomically designed, twin, integrated handles guarantee excellent manoeuvrability of the shuttering.

  • Hydraulic prop Mechanical prop

    1-part hoisting bar for mechanical removal

    of the shuttering sections.

    Accessories I

    2-part hoisting bar for mechanical removal

    of the shuttering sections.

  • Accessories II & special shuttering

    The products described in this document may already have changed because of our continued search for product improvement and excellence. Copyright HONOR Techniek B.V.

    The leading manufacturer of tools and equipment used in cemeteries!

    HONOR Piteitstechniek B.V.(reverence technology) Palmpolstraat 88, 1327 CJ AlmerePO box 60105, 1320 AC AlmereThe Netherlands

    Tel. +31 (0)36 - 521 96 05Fax +31 (0)36 - 521 96 06info@honor-pieteitstechniek.nl

    www.honor-pieteitstechniek.nl www.inno-2000.com

    Equipment trolley

    Shuttering planks with kink and fold prop

    Combination of shuttering

    section with exten-sion section of the

    same dimensions right next to each other

    (lack of space), fitted with special hoisting eyelets.

    Our design and manufacturing department can make shuttering designs according to customers requirements.

    Shuttering con-tainer available in various heights. Fixed (welded) shuttering, only suitable for putting into the soil with mechanical equipment owing to weight, size and surface pressure.

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.