Air induction components for your 2004 2005 subaru impreza wrx

AIR INDUCTION COMPONENTS FOR YOUR 2004-2005 SUBARU IMPREZA WRX

AIR INTAKES FOR THE SUBARU IMPREZA WRX

The Injen IS Air Intake Series is a traditional under hood intake system that is placed in the stock location of the factory air-box system.

Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible. Every IS system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty.

COBB SF Air Box

The COBB Tuning Heat Shield was designed to capture the cool air supplied to the SF Intake through the factory intake snorkle. Constructed of 16 ga. Aluminum the heat shield consists of a one piece surround, directional lid, and stainless fasteners that help reduce a loss of power that could be robbed from your motor by a heated intake charge.

Unlike some cold air intakes, which places the filter in the front fender, our design helps to supply cool air through factory ducting, while eliminating the risk of water ingestion. Comes with all necessary hardware and full illustrated instructions.

(Requires the use of the COBB SF Intake system)

Air Intakes

Provide increased airflow to your WRX or STI with the Mishimoto Subaru WRX/STI Performance Air Intake. Mishimoto designed this intake to be as non-restrictive as possible, featuring a straight 2.75" short-ram intake pipe and designed with maximum airflow in mind. Engineered to fit on either your stock or Mishimoto turbo inlet tube, this intake is also compatible with most aftermarket front-mount intercooler kits.

Due to the size of the intake pipe, a retune of your vehicle's ECU is necessary to keep your engine running safe and extracting the most horsepower from the added airflow. The intake pipe also features a CNC air diverter to provide consistent airflow readings to the MAF sensor, making retuning quick and easy. The intake pipe is available in a polished finish to accent any engine bay. A 2.75" diameter Mishimoto high-flow air filter is also included.

This filter is specially designed for the small engine bay of the WRX/STI and features a built-in velocity stack for maximum flow. The intake is designed to reuse the stock intake duct to provide fresh outside air to the filter.

The Mishimoto Subaru WRX/STI Performance Air Intake comes with all of the necessary clamps, couplers, and hardware for an easy install. The Mishimoto Performance Air Intake will give your Subaru WRX or STI a highly-aggressive intake tone under acceleration.

To know more update, visit us

https://subimods.com/