Top Banner
Pipe Recovery Technology & Wireline Accessories GE imagination at work GE Oil & Gas Version 2013-1
436

AES Catalog

Jul 21, 2016

Download

Documents

Wireline Accessories & Free Point Technology
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: AES Catalog

Pipe Recovery Technology & Wireline Accessories

GE imagination at work

GE Oil & Gas

Version 2013-1

Page 2: AES Catalog
Page 3: AES Catalog

Pipe Recovery Technology & Wireline Accessories

Section Size A 5/8” - 11/16” Page 4 B 3/4” Page 44 C 1” Page 68 D 1 3/8” Page 112 E 1 7/16” Page 188 F 1 1/2” - 1 11/16” Page 224 G 1 3/4” - 3 1/4” Page 330 H Panels Page 392 1 Index Page 420 2 Index by Part Number Page 428

Page 4: AES Catalog
Page 5: AES Catalog

<< Return to Main Menu

SECTION A

5/8” - 11/16”Table of Contents - 5/8” - 11/16”

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

PAGE TOOLCABLE HEADSA-1 5/8” Cable Head Assembly (Clamp Ring) 11/16” Cable Head Assembly (Clamp Ring)

SINKER BARSA-3 AES 5/8”x2 1⁄2’ Sinker Bar Assembly AES 5/8”x3’ Sinker Bar Assembly AES 11/16”x 3’ Sinker Bar Assembly

CASING COLLAR LOCATORSA-5 5/8” Casing Collar Locator Complete Assembly (Non-Grounded)A-7 11/16” Casing Collar Locator Complete Assembly (Non-Grounded)A-9 11/16” Casing Collar Locator Complete Assembly (Grounded)

FREE POINT TOOLS & ACCESSORIES A-11 11/16” Free Point Complete Assembly 11/16” Free Point Complete Assembly w/Magnetic Decentralizer 11/16” Tear Drop Sub A-13 11/16” Slack Joint Section Complete Assembly A-15 11/16” Upper Bow Spring Complete AssemblyA-17 11/16” Free Point Sensor Section Complete AssemblyA-19 11/16” Lower Bow Spring Complete AssemblyA-21 11/16” Upper Magnet Section Assembly 11/16” Lower Magnet Section Assembly 11/16” Magnet Extension Assembly A-23 11/16” Shot Rod Hanger Assembly (1/4” Rod)A-25 11/16” AES Tear Drop Sub Complete Assembly A-27 5/8” Resistor Sub Complete Assembly

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS A-29 5/8” Pin To JRC Cutter Assembly A-31 Pipe Recovery System Chemical Cutter To Tear Drop Pipe Recovery System Chemical Cutter To Pressure Connector Pipe Recovery Chemical Cutter Pin A-33 5/8” Tear Drop 5/8” Tear Drop Pressure A-35 AES Double Box Sub AES Double Pin Sub A-37 AES 5/8” Bull Plug

Page 6: AES Catalog

A-1

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

CABLE HEAD

5/8”-11/16” Cable Head Assembly (Clamp Ring)

Ref. Part No. Description 1 AS00003* 5/8” Cable Head Complete Assy (Clamp ring) 2 AS10006* 11/16” Cable Head Complete Assy (Clamp ring) 3 AS00001 5/8” Tear Drop w/Wet Connection 4 AS10014 11/16” Tear Drop w/Wet Connection 5 HOO0047 10-32 x 3/16” Set Screw for 5/8” Cablehead (12 req.) HOO0050 10-32 x 1/4” Set Screw for 11/16” Cablehead (12 req.) 6 0.6250010* Cablehead Clamp Tube, 5/16” line 0.6250082* Cablehead Clamp Tube, 7/32” line 7 0.6870087* 11/16” Cablehead Body, 5/16” line 0.6870091* 11/16” Cablehead Body, 7/32” line 8 0.6870052 Thread Protector, Pin (Not Shown) 9 0.6250081 5/8” Cablehead Body, 7/32” line 0.6250008 5/8” Cablehead Body, 5/16” line10 HOO0003 4-40 x 1/8 Socket Set Screw, Alloy* Specify line size when ordering

KIT-00001 Includes: LBOO0032 Teflon®Tubing, #4 Thin Wall CON0011 Spring Loaded Contact HOO0003 4-40 x 1/8 Socket Set Screw, Alloy (2) 0.6870002 Insulating Washer 0.6870007 4-40 Contact Receptacle 0.6870030 6-32 to 4-40 Contact Rod BOO0101 Teflon® Tubing, #8 Light WallDoes not include O-Rings

5

6

3

4

8

7 9

1

2

10

1/2 - 20 UNF-2A

Page 7: AES Catalog

A-2

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

SPECIFICATIONS AS00003

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

5/8”-11/16” Cable Head Assembly (Clamp Ring)

Tool diameter (O.D.) 5/8” (15.875 mm)Tool length 11 7/8” (301.625 mm)Tool weight 0.626 lb. (0.284 kg)Shipping length 17 7/8” ( 454.025 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection (1/2-20 UNF)

SPECIFICATIONS AS10006Tool diameter (O.D.) 11/16” (17.463 mm)Tool length 11 7/8” (301.625 mm)Tool weight 0.939lb (0.426kg)Shipping length 17 7/8” (454.025 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Bottom connection (1/2-20 UNF)

CABLE HEAD

Page 8: AES Catalog

A-3

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

SINKER BAR

5/8” - 11/16” Sinker Bars

13

5

16 16

14

11

12

8

14

109

6

7

15

15

12

3

4

Ref. Part No. Description 1 AS00004 5/8” x 2-1/2’ Assy 2 AS00013 5/8” x 3’ Assy 3 AS10013 11/16” x 3’ Assy 4 KIT-00013* Complete Kit Assy 5 0.6870012 4-40 Contact Receptacle 6 LBOO0032 Teflon® Tubing, #4 Thin Wall 7 CON0011 Spring Loaded Contact 8 OOV0012-95 Viton 95 O-Rings: 012 9 0.6870031 Crossover Contact10 0.6870002 Insulating Washer11 BOO0101 Teflon® Tubing, #8 Light Wall12 0.6250062 4-40 Contact Rod - 33 7/8” LG.13 0.6870003 Contact Insulator14 0.6250046 3 ft. Sinker Bar Body (5/8” OD) 0.6870083 3 ft. Sinker Bar Body (11/16” OD)15 0.6870052 Thread Protector, Pin (Not Shown)16 0.6870053 Thread Protector, Box (Not Shown)

*KIT-00013 Includes: 0.6250062 4-40 Contact Rod - 33 7/8” LG. LBOO0032 Teflon® Tubing, #4 Thin Wall CON0011 Spring Loaded Contact 0.6870002 Insulating Washer 0.6870003 Contact Insulator 0.6870012 4-40 Contact Receptacle 0.6870031 Crossover Contact BOO0101 Teflon® Tubing, #8 Light WallDoes not include O-Rings

* 11/16” Only offered in 16” stroke

1/2” - 20 UNF-2A

1/2” - 20 UNF-2B

Page 9: AES Catalog

A-4

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

SINKER BAR

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Steel models available

5/8” - 11/16” Sinker Bars

SPECIFICATIONS AS00013Tool diameter (O.D.) 5/8 in. (15.875mm)Tool length 36 in. (914.4 mm)Tool weight 3.003 lbs. (1.362kg)Shipping length 42 in. (1066.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/2” - 20 UNF)Bottom connection (1/2” - 20 UNF)

SPECIFICATIONS AS10013Tool diameter (O.D.) 11/16 in. (17.463mm)Tool length 36 in. (914.4 mm)Tool weight 3.69 lbs. (1.674 kg)Shipping length 42 in. (1066.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/2” - 20 UNF)Bottom connection (1/2” - 20 UNF)

Tool diameter (O.D.) 5/8 in. (15.875mm)Tool length 30 in. (762mm)Tool weight 2.189 lbs. (.993kg)Shipping length 36 in. (914.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/2” - 20 UNF)Bottom connection (1/2” - 20 UNF)

SPECIFICATIONS AS00004

AS10013 AS00004

AS00013

Page 10: AES Catalog

A-5

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

CASING COLLAR LOCATOR

5/8” Casing Collar Locator (Non-Grounded)

45

6

1112

1

14 9

15

15

16

17

17

10

1/2” - 20 UNF-2B

1/2” - 20 UNF-2B

13

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS00005 5/8” CCL Complete Assy (NG) 2 0.6250001 CCL Housing 5/8” 3 AS00005-1NEW CCL Coil & Mag 5/8” AES NEW 4 5815 5/8” CCL Contact Insulator 5 5817 1/4”-28 x 3/16” Socket SetScrew Modified 6 0.6250004-1 Magnet, CCL 5/8” Alnico 6 7 PSA136 CCL Coil Assy 5/8” AES 8 5833 5/8” CCL Coil Insulator 9 5816 5/8” CCL Contact Insulator10 5819 C Rod 4-40 x 6.600 5/8” CCL11 5818 Brass Contact 5/8” CCL12 HOO0527 1/4”-28 x 3/16” Socket Set Screw13 SEM0069-1 Diode Doiuble Spring Assy14 SEM0014 Diode 1N506215 HOO429GP Spring, Diode Gold Plated16 WIR1021 AWG26, Teflon® Green Wire17 0.6870053 Thread Protector, Box (Not Shown)

3

2

9

7

Page 11: AES Catalog

A-6

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

CASING COLLAR LOCATOR

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Depth Correlation• Can be run with free point back off

Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 10.65 in. (270.5 mm)Tool weight 0.8 lbs (0.363 kg)Shipping length 13 in. (330.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 191-216 OhmsTop connection (1/2”-20 UNF)Bottom connection (1/2”-20 UNF)Sensor measure point 4.625 in. (117.475 mm) from bottom of tool

5/8” Casing Collar Locator (Non-Grounded)

SPECIFICATIONS AS00005

Page 12: AES Catalog

A-7

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

CASING COLLAR LOCATOR

5

6

1112

14 10

15

15

16

17

17

2

10

1/2” - 20 UNF-2B

1/2” - 20 UNF-2B

14

7

11/16” Casing Collar Locator (Non-Grounded)

31

4

9

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS10001 11/16” CCL Complete Assy (NG) 2 0.6870043 CCL Housing 11/16” 3 AS00005-1NEW CCL Coil & Mag 5/8” AES NEW 4 5815 5/8” CCL Contact Insulator 5 5817 1/4”-28 x 3/16” Socket SetScrew Modified 6 0.6250004-1 Magnet, CCL 5/8” Alnico 6 7 PSA136 CCL Coil Assy 5/8” AES 8 5833 5/8” CCL Coil Insulator 9 5816 5/8” CCL Contact Insulator10 5819 C Rod 4-40 x 6.600 5/8” CCL11 5818 Brass Contact 5/8” CCL12 HOO0527 1/4”-28 x 3/16” Socket Set Screw13 SEM0069-1 Diode Doiuble Spring Assy14 SEM0014 Diode 1N506215 HOO429GP Spring, Diode Gold Plated16 WIR1021 AWG26, Teflon® Green Wire17 0.6870053 Thread Protector, Box (Not Shown)

Page 13: AES Catalog

A-8

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS10001

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and includes a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Depth Correlation• Can be run with free point back off

Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 10.65 in (270.5)Tool weight 1.0 lb (0.454 kg)Shipping length 13 in. (330.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 191-216 OhmsTop connection GO Type Female (1/2”-20 UNF)Bottom connection GO Type Female (1/2”-20 UNF) Sensor measure point 4.625 in. (117.475 mm) from bottom of tool

11/16” Casing Collar Locator (Non-Grounded)

Page 14: AES Catalog

A-9

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

CASING COLLAR LOCATOR

11/16” Casing Collar Locator Assembly (Grounded)

Ref. Part No. Description 1 AS10018 11/16” Casing Collar Locator Shooting Assy (Grounded)2 0.6870043 CCL Housing 11/16”3 AS00021-1 5/8” (grounded) CCL Shooting Assy4 LAF00090 4-40 x 6.85 C Rod Assy5 5817 1/4”-28 x 1/4” Set Screw6 PSA140 5/8” AES CCL Coil ASsy 7 LAF00089 5/8” Grounded CCL Bobbin 8 5833 5/8” CCL Coil Insulator9 WIR1021 Teflon Green Wire10 LAF00088 5/8” Grounded CCL Contact Insulator11 5816 5/8” CCL Contact Insulator12 0.62850004-1 5/8” CCL Magnet13 LAF00087 5/8” Grounded CCL Contact Insulator14 5817 1/4”-28 x 1/4” Set Screw15 HOO0126SS Ground Spring16 HOO142 4-40 x 1/4” Flat Head Screw17 XSEM0069-1 Double Diode Spring Assy18 BOO0102 Teflon Tubing19 HOO0564 1/4”-28 x 5/16” Set Screw20 HOO0527 1/4”-28 x 3/16” Set Screw 21 5818 5/8” CCL Brass Contact22 0.6870053 11/16” Thread Protector, Box 23 OOV0012-95 Viton 95 O-Ring: 012

22

23

2

1413

4

18

10

15

168

7

12

9

115

17

2021

19

23

22

6

4

3

1

Page 15: AES Catalog

A-10

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS10018

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and includes a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Depth Correlation• Can be run with free point back off

Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 10.65 in (270.5)Tool weight 1.0 lb (0.454 kg)Shipping length 13 in. (330.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 191-216 OhmsTop connection (1/2”-20 UNF)Bottom connection GO Type Female (1/2”-20 UNF) Sensor measure point 4.625 in. (117.475 mm) from bottom of tool

11/16” Casing Collar Locator Assembly (Grounded)

Page 16: AES Catalog

A-11

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Free Point Assembly

5

4

3 13

4

15

14

22

11/16” Free Point Magnet Tool Assembly

12

1

11

Ref. Part No. Description 1 AS100FP 11/16” Free Point Complete Assy 2 AS10002 11/16” Slack Joint Section Complete Assy 3 AS10003 11/16” Upper Bow Spring Complete Assy 4 AS10004 11/16” Sensor Section Complete Assy 5 AS10005 11/16” Lower Bow Spring Complete Assy 6 0.6250031 Shot Rod ¼” x 5 7 0.6870085 11/16” Shot Rod Bull Plug 8 AS10015 11/16” Shot Rod Hanger 9 AS10014 Tear Drop Sub10 AS00019 5/8” Resistor Sub11 0.6870038 11/16” Free Point Bull Plug16 AS10018 11/16” Shot Rod Assy

OPTIONS: None

Ref. Part No. Description 12 AS100FPM 11/16” Free Point Complete Assy with Magnet Section 2 AS10002 11/16” Slack Joint Section Complete Assy 4 AS10004 11/16” Sensor Section Complete Assy 6 0.6250031 Shot Rod ¼” x 5 7 0.6870085 11/16” Shot Rod Bull Plug 8 AS10015 11/16” Shot Rod Hanger 9 AS10014 Tear Drop Sub16 AS10016 11/16” Shot Rod Assy13 AS10010 11/16” Upper Magnet Section Assy14 AS10011 11/16” Lower Magnet Section Assy15 AS10012 11/16” Magnet Extension Assy16 AS00018 11/16” Shot Rod Assy

OPTIONS: None

8

8

7

16

9

6

6

9

8

7

1610

Page 17: AES Catalog

A-12

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a sensor section to determine stuck point. Additional components that can be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

11/16” Free Point Assembly11/16” Free Point Magnet Tool Assembly

SPECIFICATIONS AS100FPM

SPECIFICATIONS AS100FP

Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 105.25 - 117.25 in. (2673.35 - 2978.15 mm) (w/o shotrod assy)

Tool weight 9.5 lbs. (4.31 kg)Shipping length 111.25 in. ( 2825.75 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)Bottom connection GO Type Female (1/2” - 20 UNF)

Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 89.562 - 101.562 in. (2274.874 - 2579.675 mm) ( w/o shotrod assy)

Tool weight 8.5 lbs. (3.86 kg)Shipping length 95 in. (2413 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)Bottom connection Go TYPE Female (1/2” - 20 UNF)

AS100FP AS100FPM

Page 18: AES Catalog

A-13

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Slack Joint Section

Ref. Part No. Description 1 AS10002 11/16” Slack Joint Section Complete Assy 2 KIT-10002* Complete Kit Assy 3 LBOO0032 Teflon® Tubing, #4 Thin Wall 4 OOV0012-95 Viton 95 O-Rings: 012 5 0.6870001 11/16” Slack Joint Top Sub 6 CON0011 Spring-loaded Contact 7 0.6870002 Insulating Washer 8 0.6870007 Cone Nut 9 HOO0003 4-40 x 1/8” Socket Set Screw, Alloy10 WIR1041-0.687 Slack Joint Spring 11 0.6870008 Slack Joint Housing12 0.6870051 Slack Joint Mandrel Jam Nuts13 BOO0102 Insulating Sleeve14 HOO0141 6-32 x 1/8” Socket Set Screws, Alloy15 0.6870010 11/16” Slack Joint Guide16 HOO0004 4-40 x 1/8” Pan Head Screw S.S.17 HOO0126A Ground Spring18 OOV0010-95 Viton 95 O-Rings: 01019 0.6870011 Slack Joint Inner Mandrel Connection Sub20 0.6870078 Contact Rod, 4-40 x 18.37521 0.6870012 4-40 Contact22 0.6870003 Contact Insulator23 0.6870009 Slack Joint Inner Mandrel24 0.6870030 6-32 x 4-40 Contact Rod25 0.6870052 11/16” Thread Protector, Pin26 0.6870053 11/16” Thread Protector, Box27 BOO0096 Teflon® Tubing, #8 Thin Wall

*KIT-10002 Includes: (3) 0.6870002 Insulating Washer 0.6870003 Contact Insulator 0.6870012 4-40 Contact 0.6870030 6-32 x 4-40 Contact Rod BOO0096 Teflon® Tubing, #8 Thin Wall (2) HOO0003 4-40 x 1/8” Socket Set Screw, Alloy (2) 0.6870007 Cone Nut 0.6870078 Contact Rod, 4-40 x 18.375 LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0102 Insulating Sleeve CON0011 Spring-loaded Contact WIR1041-0.687 Slack Joint SpringDoes not include O-Rings

1

2122

18

23

20

13

12

7

8

8

7

24

7

3

64

9

9

14

15

1617

14

19

26

2

1/2”-20 UNF-2A

1/2”-20 UNF-2B

11

10

5

27

25

12

Page 19: AES Catalog

A-14

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

DESCRIPTION The slack joint section of the Free Point Indicator tool relieves weight above the tool as-sembly when the tool is at the correct depth for making a measurement.

FEATURES • Wild range of tools are abailable for operations inside large diameter casings and small diameter pipe sizes and restrictions. • 11/16” Slack Joint only available in 16” stroke.

FREE POINT

SPECIFICATIONS AS10002Tool diameter (O.D.) 11/16 in. (17.463 mm0Tool length 35.125 in. (882.175 mm)Tool weight 2.66 lbs. (1.21 kg)Shipping length 41.125 in. (1146.175 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145MPa)Top connection GO Type Male (1/2” - 20 UNF) Bottom connection GO Type Female (1/2” - 20 UNF)

11/16” Slack Joint Section

Page 20: AES Catalog

A-15

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Upper Bow Spring

Ref. Part No. Description 1 AS10003 11/16” Upper Bow Spring Complete Assy 2 KIT-10003* Complete Kit Assy 3 LBOO0032 Teflon® Tubing, #4 Thin Wall 4 CON0011 Spring-loaded Contact 5 OOV0012-95 Viton 95 O-RIngs: 012 6 0.6870002 Insulating Washer 7 0.6870014 Upper Spring Mandrel Connection Sub 8 0.6870031 6-32 to 4-40 Crossover 9 0.6870082 4-40 Contact Rod 10 OOV0010-95 Viton 95 O-Rings: 010 11 HOO0141 6-32 x 1/8” Socket Set Screw, Alloy 12 0.6870047 Freepoint Adjustment Nut 13 0.6870050 Freepoint Compression Sleeve 14 0.6870065 Bow Spring Washer 15 0.6870025 Compression Spring 16 0.6870019 Spring Adjustment Sleeve 17 0.6870020 Freepoing Adjustment Collar 18 0.6870015 Bow Spring Mandrel 19 0.6870003 Contact Insulator 20 0.6870012 4-40 Contact 21 PSA012 11/16” Bow Spring Assy22 0.6870052 11/16” Thread Protector, Pin (Not Shown)23 0.6870053 11/16” Thread Protector, Box (Not Shown)24 BOO0102 Teflon® Tubing, #10 Light Wall

*KIT-10003 Includes: 0.6870002 Insulating Washer 0.6870003 Contact Insulator 0.6870012 4-40 Contact 0.6870031 6-32 to 4-40 Crossover BOO0102 Teflon® Tubing, #10 Light Wall 0.6870082 4-40 Contact Rod LBOO0032 Teflon® Tubing, #4 Thin Wall CON0011 Spring-loaded ContactDoes not include O-Rings

15

14

13

12

10

6

8

3

22

4

5

1

2

16

1117

18

9

10

19

20

23

24

11

1/2”-20 UNF-2B

3/8”-16 UNC-2A

7

11

21

Page 21: AES Catalog

A-16

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS10003

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

11/16” Upper Bow Spring

Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 26.375 in. (669.925 mm)Tool weight 1.82 lbs. (0.826 kg)Shipping length 32.375 in. (822.325 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (3/8” - 16 UNF)Bottom connection GO Type Female (1/2” - 20 UNF)Min I.D. 0.75 in. ( 19.05 mm)Max I.D. 4 in. (101.6 mm)

Page 22: AES Catalog

A-17

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Free Point Sensor Section

1

22530

28

26

4

6

5

8

7

9

10

22

11

12

13

15

1724

20

2118

29

16

14

23 1814

1/2”-20 UNF-2A

3

3/8”-16 UNC-2B

27

Ref. Part No. Description 1 AS10004 11/16” Free Point Sensor Section Complete Assy 2 OOV0012-95 Viton 95 O-Rings: 012 3 0.6870022 Sensor Connection Sub 4 OOV0013-95 Viton 95 O-Rings: 013 5 HOO0079 2-56 Socket Set Screw 6 PSA057 11/16” Sensor Top Sub Contact 7 0.6870029 Sensor Module Jam Nut 8 PSA050 11/16” Sensor Coil Assy 9 3.0020 Measuring Sensor 10 HOO0130 Retainer Ring 11 0.6870027 Sensor Spring 12 0.6870023 Sensor Housing 13 0.6870028 Sensor Mandrel 14 WIR1042 Boot Safety Wire 15 BOO0051 Boot 16 0.6870032 Boot Protector 17 OOV0011 Viton 75 O-Rings: 011 18 HOO0025 6-32 x 3/16” Socket Set Screw, Alloy 19 0.6870034 Sensor Mandrel Jam Nut 20 OOV0009-95 Viton 95 O-Rings: 009 21 0.6870035 Sensor & Lower Mandrel Connection Sub 22 3.0026 Measuring Sensor Cap 23 0.6870067 Sensor Mandrel Collar 24 0.6870033 Boot End Cap 25 CON0011 Spring-loaded Contact 26 LBOO0032 Teflon® Tubing, #4 Thin Wall27 0.6870090 Insulator 28 0.6870052 Thread Protector, Pin29 0.6870053 Thread Protector, Box30 KIT-10004* Complete Kit Assy

*KIT-10004 Includes: LBOO0032 Teflon® Tubing, #4 Thin Wall 0.6870090 Insulator CON0011 Spring-loaded Contact PSA057 11/16” Sensor Top Sub ContactDoes not include O-Rings

18

18

19

Page 23: AES Catalog

A-18

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS10004Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 16.781 (426.237 mm)Tool weight 1.46 lbs. (0.662 kg)Shipping length 22.781 in. (578.6374 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)Bottom connection (3/8” - 16 UNC)

11/16” Free Point Sensor Section

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a sensor section to determine stuck point. Additional components that can be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

Page 24: AES Catalog

A-19

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Lower Bow Spring

Ref. Part No. Description 1 AS10005 11/16” Lower Bow Spring Complete Assy 2 OOV0010-95 Viton 95 O-Rings: 010 3 0.6870047 Freepoint Adjustment Nut 4 0.6870050 Freepoint Compression Sleeve 5 0.6870065 Bow Spring Washer 6 0.6870025 11/16” Compressions Spring 7 0.6870019 Freepoint Spring Adjustment Sleeve 8 0.6870020 Freepoint Adjustment Collar 9 HOO0141 6-32 x 1/8” Socket Set Screw, Alloy 10 0.6870036 11/16” Lower Bow Spring Mandrel 11 OOV0012-95 Viton 95 O-Rings: 012 12 0.6870038 11/16” Freepoint Bull Plug 13 PSA012 11/16” Bow Spring Assy

12

11

9

10

9

8

1

1/2”-20 UNF-2B

7

6

5

4

3

2

3/8”-16 UNC-2A

13

2

Page 25: AES Catalog

A-20

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

11/16” Lower Bow Spring

SPECIFICATIONS AS10005Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 24.437 in. (620.7 mm)Tool weight 1.66 lbs. (0.75 kg)Shipping length 30.437 in. (773.0998 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa) Top connection (3/8” - 16 UNC)Bottom connection GO Type Female (1/2” - 20 UNF)Min I.D. 0.75 in. (19.05 mm)Max I.D. 4 in. (101.6 mm)

Page 26: AES Catalog

A-21

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Magnet Section Assemblies

3/8”-16 UNC-2A

6

7

5

8

9

10

11

12

1

4

6

23

13

1/2”-20 UNF-2B

1/2”-20 UNF-2A

1/2”-20 UNF-2B

Ref. Part No. Description 1 AS10010 11/16” Upper Magnet Section Assy 2 AS10011 11/16” Lower Magnet Section Assy 3 AS10012 11/16” Magnet Extension Assy 4 KIT-10010* Complete Kit Assy 5 CON0011 Spring-loaded Contact 6 OOV0012-95 Viton 95 O-Rings: 012 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 0.6870002 Insulating Washer 9 BOO0096 Teflon® Tubing, #8 Thin Wall10 0.6870073 6-32 Contact Rod11 0.6870003 Contact Insulator12 0.6870072 6-32 Contact13 OOV0010-95 Viton 95 O-Rings: 01014 HOO0318 Carbide Pad15 HOO0280 Magnet16 0.6870052 Thread Protector, Pin17 0.6870053 Thread Protector, Box

*KIT-10010 Includes: 0.6870002 Insulating Washer 0.6870003 Contact Insulator 0.6870072 6-32 Contact 0.6870073 6-32 Contact Rod LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0096 Teflon® Tubing, #8 Thin Wall CON0011 Spring-loaded ContactDoes not include O-Rings

14

15

14

15

17

17

16

16

Page 27: AES Catalog

A-22

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS10010

DESCRIPTION The magnet section of the Free Point Indicator tool decentralizes the tool against the side wall of large casings allowing for accurate measurement of stact pipe.

FEATURES • Decentralizes Free Pont Indicator tool

Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 9.1 in (231.14 mm)Tool weight 0.930 lb. (0.422 kg)Shipping length 15.1 in. ( 383.54 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)Bottom connection GO Type Female (1/2” - 20 UNF)

11/16” Magnet Section Assemblies

SPECIFICATIONS AS10012Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 16.625 in (422.275 mm)Tool weight 0.76 lb. (0.345 kg)Shipping length 22.625 in. (574.675 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (3/8” - 16 UNF)Bottom connection GO Type Female (1/2” - 20 UNF)

SPECIFICATIONS AS10011Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 11.9in (302.26 mm)Tool weight 1.22 lb. (0.553 kg)Shipping length 17.9 in. (454.66 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)

AS10010

AS10012

AS10011

Page 28: AES Catalog

A-23

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” Shot Rod Hanger Assembly

1

2

3

4

Ref. Part No. Description 1 AS10016 11/16” Shot Rod Hanger Assy (1/4” Rod) 2 AS10015 11/16” Shot Rod Hanger Sub (1/2”-20 V Threads) 3 0.6250031 1/4” x 5 Shot Rod (1/4”-20 UNC Threads)4 0.6870085 11/16” Shot Rod Bull Plug

Page 29: AES Catalog

A-24

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

DESCRIPTION The shot rod hanger mounts the explosive string shot assemblies to be run simultaneously with the Free Point Indicator.

11/16” Shot Rod Hanger Assembly

SPECIFICATIONS Shot Rod HangerTool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 5 in (127 mm)Tool weight 0.344 lb. (0.156 kg)Shipping length 11 in. (279.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Female (1/2” - 20 UNF)Bottom connection (1/4” - 20 UNF)

SPECIFICATIONS Shot RodTool diameter (O.D.) 1/4 in. (6.35 mm)Tool length 59.5 in (1511.3 mm)Tool weight 0.820 lb. (0.372 kg)Shipping length 65.5 in. (1663.7 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/4” - 20 UNF)Bottom connection (1/4” - 20 UNF)

SPECIFICATIONS Shot Rod Bull PlugTool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 1.5 in (38.1 mm)Tool weight 0.125 lb. (0.057 kg)Shipping length 7.5 in. (190.5 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection 1/4” - 20 UNF

Page 30: AES Catalog

A-25

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” AES Tear Drop Sub

Ref. Part No. Description 1 AS10014 11/16” AES Tear Drop Sub Complete Assy 2 KIT-10014* Complete Kit Assy 3 LBOO0032 Teflon® Tubing, #4 Thin Wall 4 OOV0012-95 Vtion 95 O-Rings: 012 5 CON0011 Spring Loaded Contact 6 0.6870086 11/16” Tear Drop Sub Body 7 0.6870002 Insulating Washer 8 BOO0101 Teflon® Tubing, #8 Light Wall 9 0.6870030 6-32 to 4-40 Contact Rod10 0.6870007 11/16” Contact Receptacle11 HOO0003 4-40 x 1/8” Socket Set Screw, Alloy

*KIT-10014 Includes: (2) 0.6870002 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall CON0011 Spring Loaded Contact 0.6870007 11/16” Contact Receptacle 0.6870030 6-32 to 4-40 Contact Rod BOO0101 Teflon® Tubing, #8 Light WallDoes not include O-Rings

2

1

3

4

5

6

7

8

9

7

10

11

1/2”-20 UNF-2A

1/2”-20 UNF-2A

Page 31: AES Catalog

A-26

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

11/16” AES Tear Drop Sub

SPECIFICATIONS AS10014

Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 1.03 in. (26.162 mm)Tool weight 0.219 lb. (0.099 kg)Shipping length 7.03 in. (178.562 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)Bottom connection GO Type Tear Drop Male (1/2” - 20 UNF)

Page 32: AES Catalog

A-27

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

COMPONENTS5/8” Resistor Sub

Ref. Part No. Description 1 AS00019 5/8” Resistor Sub Complete Assy 2 KIT-00019* Complete Kit Assy 3 0.6250071 Contact Sub Body 4 HOO0153 6-32 x 3/4” Pan Head Screw, S.S. 5 0.6250070 Beveled Insulating Washer 6 LBOO0032 Teflon® Tubing, #4 Thin Wall 7 OOV0012-95 Viton 95 O-Rings: 012 8 CON0011 Spring Loaded Contact 9 0.6870002 Insulating Washer10 BOO0101 Teflon®Tubing, #8 Light Wall11 PSA033 47 OHM Resistor Cartridge

*KIT-00019 Includes: 0.6250070 Beveled Insulating Washer CON0011 Spring Loaded Contact PSA033 47 OHM Resistor Cartridge 0.6870002 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0101 Teflon® Tubing, #8 Light Wall HOO0153 6-32 x 3/4” Pan Head Screw, S.S.Does not include O-Rings

1

2

6

7

8

10

9

11

4

5

3

1/2” - 20 UNF-2B

1/2” - 20 UNF-2A

Page 33: AES Catalog

A-28

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS00019

Tool diameter (O.D.) 5/8” in. (15.875 mm)Tool length 3.962 in. (100.635 mm)Tool weight 0.313 lb. (0.142 kg)Shipping length 9.962 in. (253.0348 mm) Temperature rating 500°F (260°C)Pressure rating 21000 Psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)Bottom connection GO Type Female (1/2” - 20 UNF)

5/8” Resistor Sub

Page 34: AES Catalog

A-29

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

5/8” AES Pin To JRC Cutter

Ref. Part No. Description1 AS00008 AES 5/8” Pin to JRC Cutter Complete Assy2 0.6250056 Contact Sub Body3 LBOO0032 Teflon® Tubing, #4 Thin Wall4 OOV0012-95 Viton 95 O-Rings: 0125 CON0011 Spring Loaded Contact6 KIT-00008* Complete Kit Assy7 0.6250064 JRC Cutter Crossover Contact8 0.6250063 Contact Insulator9 CON0009 Connector, Female10 BOO0096 Teflon® Tubing, #8 Thin Wall11 BOO0037 Heat Shrink

*KIT-00008 Includes: 0.6250063 Contact Insulator 0.6250064 JRC Cutter Crossover Contact LBOO0032 Teflon® Tubing, #4 Thin Wall CON0009 Connector, Female BOO0096 Teflon® Tubing, #8 Thin Wall BOO0037 Heat ShrinkDoes not include O-Rings

1

3

4

5

2

4

8

91011

7

1/2” - 20 UNF-2A

1/4” - 28 UNF-2B

Note: Thesecontacts are not fieldserviceable.

6

Page 35: AES Catalog

A-30

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS00008Tool diameter (O.D.) 5/8 in. (15.875 mm) Tool length 1.250 in. (31.75 mm)Tool weight 0.188 lb (0.085 kg)Shipping length 7.25 in. (184.15 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF) Bottom connection JRC Cutter Male (1/2”- 20 UNF)

5/8” AES Pin To JRC Cutter

Page 36: AES Catalog

A-31

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

11/16” Pipe Recovery Systems ChemicalCutter To 5/8” AES Tear Drop11/16” Pipe Recovery Systems ChemicalCutter To Pressure Connector11/16” Pipe Recovery Systems ChemicalCutter To 5/8” AES Pin Ref. Part No. Description 1 AS00011 11/16” Pipe Recovery Systems Chemical Cutter to 5/8” AES Tear Drop 2 AS00012 11/16” Pipe Recovery Systems Chemical Cutter to Pressure Connector 3 AS00015 11/16” Pipe Recovery Systems Chemical Cutter to 5/8” AES Pin 4 KIT-00011* Complete Kit Assy 5 KIT-00012* Complete Kit Assy 6 KIT-00015* Complete Kit Assy 7 OOV0012-95 Viton 95 O-Rings: 012 8 PSA010 Contact Assy 9 CON0011 Spring Loaded Contact10 BOO0096 Insulating Sleeve11 0.6870030 6-32 Contact Rod12 0.6870002 Insulating Washer13 0.6870007 11/16” Contact Nut14 HOO0003 4-40 x 1/8” Socked Set Screw, Alloy15 LBOO0032 Teflon® Tubing, #4 Thin Wall16 OOV0008-95 Viton 95 O-Rings: 00817 PSA001 PSA1 5/8” Tear Drop with Pressure Connector18 0.6250075 6-32 Contact Rod19 0.6250007 Contact Sub Body20 0.6250024 Contact Sub Body21 0.6250057 Contact Sub Body22 0.6870090 Contact Insulator

*KIT-00011 Includes: (2) 0.6870002 Insulating Washer 0.6870007 11/16” Contact Nut 0.6870030 6-32 Contact Rod BOO0096 Insulating Sleeve HOO0003 4-40 X 1/8” Socket Set Screw, Alloy LBOO0032 Teflon® Tubing, #4 Thin Wall PSA010 Contact AssyDoes not include O-Rings

*KIT-00012 Includes: PSA010 Contact Assy 0.6870090 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall PSA001 PSA1 5/8” Tear Drop with Pressure ConnectorDoes not include O-Rings

*KIT-00015 Includes: 0.6250075 6-32 Contact Rod LBOO0032 Teflon® Tubing, #4 Thin Wall PSA010 Contact Assy 0.6870002 Insulating Washer BOO0096 Insulating Sleeve CON0011 Spring Loaded Contact Does not include O-Rings

1

2

6

7 15

8

19

11

10

1412

13

15

7

8

20

22

16

17

12

15

7

8

21

10

7

9

4

5

3

Note: CON-0038 rubber pressure connector boot mates with CON-0012-A pressure connector

1/2”-20 UNF-2A

1/2”-20 UNF-2A

1/2”-20 UNF-2A

12

18

Page 37: AES Catalog

A-32

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

11/16” Pipe Recovery Systems Chemical Cutter To 5/8” AES Tear Drop11/16” Pipe Recovery Systems Chemical Cutter To Pressure Connector11/16” Pipe Recovery Systems Chemical Cutter To 5/8” AES Pin

SPECIFICATIONS AS00011Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 1.03 in (26.162 mm)Tool weight 0.160 lb. (0.073 kg)Shipping length 7.03 in. (178.562 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/2” - 20 UNF)Bottom connection GO Type Tear Drop Male (1/2” - 20 UNF)

SPECIFICATIONS AS00012Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 0.75 in (19.05 mm)Tool weight 0.125 lb. (0.057 kg)Shipping length 6.75 in. (171.45 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/2” - 20 UNF)Bottom connection (1/2” - 20 UNF)

SPECIFICATIONS AS00015Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 2 in (50.8 mm)Tool weight 0.250 lb. (0.113 kg)Shipping length 8 in. (203.2 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection (1/2” - 20 UNF)Bottom connection GO Type Male (1/2” - 20 UNF)

AS100011

AS100012

AS100015

Page 38: AES Catalog

A-33

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

5/8” AES Tear Drop 5/8” AES Tear Drop With Pressure ConnectorRef. Part No. Description 1 AS00001 AES 5/8” Tear Drop Complete Assy 2 AS00007 AES 5/8” Tear Drop w/Pressure Connector 3 KIT-00001* Complete Kit Assy 4 KIT-00007* Complete Kit Assy 5 LBOO0032 Teflon® Tubing, #4 Thin Wall 6 OOV0012-95 Viton 95 O-Rings: 012 7 CON0011 Spring Loaded Contact 8 PSA001 Contact Assy 9 0.6870002 Insulating Washer10 BOO0101 Teflon® Tubing, #8 Light Wall11 0.6870030 6-32 to 4-40 Contact Rod12 0.6870007 4-40 Contact Receptacle13 HOO0003 4-40 x 1/8” Socket Set Screw, Alloy14 0.6250007 Contact Sub Body15 0.6250024 Contact Sub Body16 0.6870090 Contact Insulator

*KIT-00001 Includes: LBOO0032 Teflon®Tubing, #4 Thin Wall CON0011 Spring Loaded Contact (2) 0.6870002 Insulating Washer 0.6870007 4-40 Contact Receptacle 0.6870030 6-32 to 4-40 Contact Rod BOO0101 Teflon® Tubing, #8 Light WallDoes not include O-Rings

*KIT-00007 Includes: 0.6870090 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall CON0011 Spring Loaded Contact PSA001 Contact AssyDoes not include O-Rings

1

3

57

6

14

9

10

13

9

12

2

4

8

6

5

7

16

15

1/2” - 20 UNF-2A

1/2” - 20 UNF-2A

11

Page 39: AES Catalog

A-34

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS00001Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 1.03 in (26.162 mm)Tool weight 0.156 lb. (0.071 kg)Shipping length 7.03 in. (178.562 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF) Bottom connection GO Type Tear Drop Male (1/2” - 20 UNF)

5/8” AES Tear Drop 5/8” AES Tear Drop With Pressure Connector

SPECIFICATIONS AS00007Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 0.75 in (19.05 mm)Tool weight 0.156 lb. (0.071 kg)Shipping length 6.75 in. (171.45 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF) Bottom connection GO Type Tear Drop Male w/Pressure Connection(1/2” - 20 UNF)

AS00001

AS00007

Page 40: AES Catalog

A-35

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

5/8” AES Double Box Sub5/8” AES Double Pin Sub Ref. Part No. Description 1 AS00009 AES 5/8” Double Box Sub (.6250036) 2 AS00014 AES 5/8” Double Pin Sub Complete Assy 3 KIT-00014* Complete Kit Assy 4 OOV0012-95 Viton 95 O-Rings: 012 5 BOO0101 Insulating Sleeve 6 LBOO0032 Teflon® Tubing, #4 Thin Wall 7 CON0011 Spring Loaded Contact 8 0.6870002 Insulating Washer 9 0.6250075 6-32 Contact Rod10 0.6250057 Contact Sub Body

*KIT-00014 Includes: 0.6250075 6-32 Contact Rod LBOO0032 Teflon® Tubing, #4 Thin Wall (2) CON0011 Spring Loaded Contact (2) 0.6870002 Insulating Washer BOO0101 Insulating Sleeve Does not include O-Rings

1/2”-20 UNF-2A

2

3

10

4

8

9

8

4

6

7

7

6

5

1 1/2”-20 UNF-2B

Page 41: AES Catalog

A-36

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

5/8” AES Double Box Sub5/8” AES Double Pin Sub

SPECIFICATIONS AS00009Tool diameter (O.D.) 5/8 in. (17.463 mm)Tool length 2 in. (50.8 mm)Tool weight 0.094 lb. (0.043 kg)Shipping length 8 in. (203.2 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection GO Type Female (1/2” - 20 UNF) Bottom connection GO Type Female (1/2” - 20 UNF)

SPECIFICATIONS AS00014Tool diameter (O.D.) 5/8 in. (17.403 mm)Tool length 2 in. (50.8 mm)Tool weight 0.250 lb. (0.113 kg)Shipping length 8 in. (203.2 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF) Bottom connection GO Type Male (1/2” - 20 UNF)

AS00009

AS00014

Page 42: AES Catalog

A-37

COMPONENTS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

5/8” AES Bull Plug

Ref. Part No. Description1 AS00006 AES 5/8” Bull Plug Complete Assy*2 KIT-00006* Complete Kit Assy 3 0.6250026 Contact Plunger4 HOO0326 Retainer Ring5 0.6250025 Brass Washer6 OOV0012-95 Viton 95 O-Rings: 0127 HOO0251 Contact Spring #228 0.6250021 Bull Plug Body

*KIT-00006 Includes: 0.6250025 Brass Washer HOO0251 Contact Spring #22 0.6250026 Contact Plunger HOO0326 Retainer RingDoes not include O-Rings

1/2”-20 UNF-2A

2 34

5

6

7

8

1

Page 43: AES Catalog

A-38

SPECIFICATIONS

<< Return to Section A Menu << Return to Main Menu

ADAPTOR

5/8” AES Bull Plug

SPECIFICATIONS AS00006Tool diameter (O.D.) 5/8 in. (15.875 mm)Tool length 1 in. (25.4 mm)Tool weight 0.125 lb. (0.057 kg)Shipping length 7 in. (177.8 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1/2” - 20 UNF)

Page 44: AES Catalog
Page 45: AES Catalog

<< Return to Main Menu

SECTION B

3/4”Table of Contents - 3/4”

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

PAGE TOOLCABLE HEADSB-1 3/4” Cable Head Assembly (Clamp Ring)

SINKER BARSB-3 3/4”x5’ Steel Sinker Bar Assembly

CASING COLLAR LOCATORSB-5 3/4” Casing Locator

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS B-7 3/4” Tear Drop Assembly B-9 3/4” AES Tear Drop to 11/16” AES Pin 3/4” Goex Severing Tool Tear Drop To 11/16” AES Pin B-11 3/4” Double GO Pin Assembly 3/4” Double GO Box Assembly B-13 3/4” GO Pin to 11/16” AES Box Assembly 3/4” GO Box to 11/16” AES Box Assembly B-15 3/4” GO Pin to 11/16” AES Pin Assembly B-17 3/4” AES Tear Drop to 3⁄4” Pipe Recovery Systems Chemical Cutter 3/4” GO Box to 3⁄4” Pipe Recovery Systems Chemical Cutter B-19 3/4” GO Pin to 3⁄4” Pipe Recovery Systems Chemical Cutter B-21 5/8” AES Pin to 3⁄4” Pipe Recovery Systems Chemical Cutter

Page 46: AES Catalog

B-1

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

CABLE HEAD

3/4” Cable Head Assembly (Clamp Ring)

7

10

Ref. Part No. Description 1 AS20004* 3/4” Cable Head Complete Assy (Clamp ring) 2 AS20002 3/4” Tear Drop Assy 3 0.7500085-9/32 3/4” Clamp Ring (9/32” Line) 0.7500081-3/8 3/4” Clamp Ring (3/8” Line) 0.7500085-7/32 3/4” Clamp Ring (7/32” Line) 0.7500081-5/16 3/4” Clamp Ring (5/16” Line) 4 0.7500084-9/32 3/4” Rope Socket Body (9/32” Line) 0.7500080-3/8 3/4” Rope Socket Body (3/8” Line) 0.7500084-7/32 3/4” Rope Socket Body (7/32” Line) 0.7500080-5/16 3/4” Rope Socket Body (5/16” Line) 5 HOO0329 1/4-28 X 1/4” Socket Set Screw, Alloy 6 0.7500028* 3/4” Cable Head Sub 7 0.7500087 3/4” Rope Socket Tool 8 AS20014 3/4” Tear Drop to 11/16” AES Pin 9 AS20016 3/4” GOEX Severing Tool Tear Drop to 11/16” AES Pin10 0.7500091 3/4” Thread Protector, Pin (Not Shown)* Specify line size when ordering

KIT-20002 Includes: (2) 0.4370001 Insulator Washer 0.7500029 TD Cone Nut 3/4” CON0004 6-32 Banana Plug 0.7500070 6-32 x 3.625 C Rod AS20002 BOO0096 Teflon® Tubing, #8 Thin WallDoes not include O-Rings

KIT-20014 Includes: 0.6870024 6-32 x 2.00 C Rod 0.7500029 TD Cone Nut 3/4” BOO0096 Teflon® Tubing, #8 Thin Wall CON0011 Contact, POGO Brute 0.4370001 Insulator Washer 0.6870002 Insulator Washer LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

5

6

4

.555-28 Stub Acme-3G

1

3

2

8

9

11/16” -28 Stub Acme

Page 47: AES Catalog

B-2

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

CABLE HEAD

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

3/4” Cable Head Assembly (Clamp Ring)

Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 9.8 in. (248.92 mm)Tool weight 0.85 lb. (0.386 kg)Shipping length 15.8 in. (401.32 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Male (.555 - 28 Stub ACME - 3G)

SPECIFICATIONS AS20004

Page 48: AES Catalog

B-3

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

SINKER BAR

3/4” Sinker Bar (Steel)

Ref. Part No. Description 1 AS20005 3/4” x 5’ Sinker Bar Assy (Steel) 2 KIT-20005* Complete Kit Assy 3 CON0004 6-32 Banana Plug 4 0.4370001 Insulating Washer 5 OOV0110-95 Viton 95 O-Rings: 110 6 0.7500030 3/4” Sinker Bar Body 7 BOO0096 Teflon® Tubing, #8 Thin Wall 8 0.7500010 6-32 Contact Rod 9 0.5000004 Beveled Insulating Washer10 1.0031 6-32 Contact Receptacle11 0.7500092 3/4” GO Box Protector12 0.7500091 3/4” GO Pin Protector

*KIT-20005 Includes: 0.4370001 Insulating Washer 0.7500010 6-32 Contact Rod 0.5000004 Beveled Insulating Washer 1.0031 6-32 Contact Receptacle BOO0096 Teflon® Tubing, #8 Thin Wall CON0004 6-32 Banana PlugDoes not include O-Rings

8

7

5

12

6

10

11

9

1

3

4

2

.555-28 STUB ACME-3G

.555-28 STUB ACME-3G

Page 49: AES Catalog

B-4

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

SINKER BAR

SPECIFICATIONS AS20005

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Steel model available

Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 60.125 in. (1527.175 mm)Tool weight 7.5 lbs. (3.40 kg)Shipping length 66.125 in. (1679.575 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Female (.555 - 28 Stub ACME - 3G)Bottom connection Male (.555 - 28 Stub ACME - 3G)

3/4” Sinker Bar (Steel)

Page 50: AES Catalog

B-5

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

CASING COLLAR LOCATOR

3/4” Casing Collar Locator (Grounded)

14

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS20007 3/4” Collar Locator Assy (G) 2 AS20007-1 3/4” CCL Coil/Magnet Assy (G) 3 0.7500001 3/4” CCL Housing 4 0.7500097 3/4” CCL Top Contact 5 HOO0197 4–40 Flat Head Screw 6 SEM0069-1 Double Diode 7 0.7500035 Top CCL Insulator 8 0.7500004 CCL Magnet 9 PSA039 CCL Coil Assy (G)10 0.7500098 Contact Thru Rod11 BOO0101 Insulating Sleeve12 HOO0126SS Ground Spring, SS13 0.7500094 Bottom CCL Insulator14 0.7500096 Bottom CCL Contact Receptacle15 HOO0038 Solder Lug16 0.7500092 3/4” Thread Protector, Box (Not Shown)17 0.7500004G CCL Magnet (G)

KIT-20007 Includes: 0.7500035 Top CCL Insulator BOO0101 Insulating Sleeve (3) HOO0197 4–40 Flat Head Screw SEM0069-1 Double Diode 0.7500094 Bottom CCL Insulator 0.7500096 Bottom CCL Contact Receptacle 0.7500097 3/4” CCL Top Contact 0.7500098 Contact Thru Rod HOO0038 Solder Lug HOO0126SS Ground Spring, SSDoes not include O-Rings

1 2

13

17

11

12

5

16

16

9

3

10

8

6

15

5

4

5

.555-28 STUB ACME-3G

.555-28 STUB ACME-3G

7

Page 51: AES Catalog

B-6

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

CASING COLLAR LOCATOR

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

3/4” Casing Collar Locator (Grounded)

SPECIFICATIONS AS20007Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 13.125 in. (333.4 mm)Tool weight 1.4 lbs. (0.64 kg)Shipping length 15.375 in. (390.6 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 480 - 520 OhmsTop connection Female (.555 - 28 Stub ACME - 3G)Bottom connection Female (.555 - 28 Stub ACME - 3G)Sensor measure point 6 in. (152.4 mm) from bottom of tool

Page 52: AES Catalog

B-7

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” GO Tear Drop

Ref. Part No. Description 1 AS20002 3/4” GO Tear Drop Assy 2 KIT-20002* Complete Kit Assy 3 CON0004 6-32 Banana Plug, Female 4 0.4370001 Insulating Washer 5 OOV0110-95 Viton 95 O-Rings: 110 6 BOO0096 Teflon® Tubing, #8 Thin Wall 7 0.7500070 Contact Rod 6-32 x 3.625 8 0.7500007 Contact Sub Body 9 0.7500029 Cone Nut

* KIT-20002 Includes: 0.4370001 Insulating Washer 0.7500029 Cone Nut CON0004 6-32 Banana Plug, Female 0.7500070 Contact Rod 6-32 x 3.625 BOO0096 Teflon® Tubing, #8 Thin WallDoes not include O-Rings

2

1

3

4

4

9

6

5

8

7

11/16”-28 STUB ACME-2G

.555-28 STUB ACME-3G

Page 53: AES Catalog

B-8

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS20002Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 0.812 in. (20.62 mm)Tool weight 0.281 lbs. (0.127 kg)Shipping length 6.812 in. (173.0248 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Male (.555 - 28 Stab ACME - 30)Bottom connection Male Tear Drop (11/16” - 28 Stub ACME - 2G)

3/4” GO Tear Drop

Page 54: AES Catalog

B-9

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” GO Tear Drop to 11/16” AES Pin

Ref. Part No. Description 1 AS20014 3/4” GO Tear Drop to 11/16” AES Pin 2 AS20016 3/4” Goex Severing Tool Tear Drop to 11/16” AES Pin 3 0.7500029 3/4” Cone Nut 4 0.4370001 Insulating Washer 5 0.6870024 Contact Rod 6-32 x 2.000 6 BOO0096 Teflon® Tubing, #8 Thin Wall 7 0.7500015 Contact Sub Body 8 0.6870002 Insulating Washer 9 LBOO0032 Teflon® Tubing, #4 Thin Wall10 OOV0012-95 Viton 95 O-Rings: 012 11 CON0011 Spring Loaded Pogo Contact12 OOV0112-95 Viton 95 O-Rings: 11213 KIT-20014* Complete Kit Assy

*KIT-20014 Includes: 0.6870024 Contact Rod 6-32 x 2.000 0.7500029 3/4” Cone Nut BOO0096 Teflon® Tubing, #8 Thin Wall CON0011 Spring Loaded Pogo Contact 0.4370001 Insulating Washer 0.6870002 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1

13

3

4

5

6

7

8

9

1110

2

13

3

4

5

7

8

9

1110

12

11/16”-28 STUB ACME-2G

11/16”-28 STUB ACME-2G

1/2” - 20 UNF-2A

1/2” - 20 UNF-2A

6

Page 55: AES Catalog

B-10

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS20014Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 0.781 in. (19.837 mm)Tool weight 0.250 lb. (0.113 kg)Shipping length 6.781 in. (172.2374 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection (11/16” - 28 Stub ACME - 2G)Bottom connection GO Type Male (1/2” - 20 UNF)

3/4” GO Tear Drop to 11/16” AES Pin

SPECIFICATIONS AS20016Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 0.781 in. (19.837 mm)Tool weight 0.250 lb. (0.113 kg)Shipping length 6.781 in. (172.2374 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection (11/16” - 28 Stub ACME - 2G)Bottom connection GO Type Male (1/2” - 20 UNF)

AS20014

AS20016

Page 56: AES Catalog

B-11

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” Double GO Pin 3/4” Double GO BoxRef. Part No. Description 1 AS20006 3/4” Double GO Pin Complete Assy 2 AS20008 3/4” Double GO Box Complete Assy 3 KIT-20006* Complete Kit Assy 4 KIT-20008* Complete Kit Assy 5 CON0004 6-32 Banana Plug, Female 6 0.4370001 Insulating Washer 7 OOV0110-95 Viton 95 O-Rings: 110 8 BOO0096 Teflon® Tubing, #8 Thin Wall 9 0.7500071 Contact Rod 6-32 x 3.50010 0.7500027 Contact Sub Body11 1.0031 6-32 Contact Receptacle12 0.5000004 Beveled Insulating Washer13 BOO0034 Insulating Sleeve14 0.7500077 Contact Rod 6-32 x 1.25015 0.7500041 Contact Sub Body

* KIT-20006 Includes: (2) 0.4370001 Insulating Washer 0.7500071 Contact Rod 6-32 x 3.500 BOO0096 Teflon® Tubing, #8 Thin Wall (2) CON0004 6-32 Banana Plug, FemaleDoes not include O-Rings

* KIT-20008 Includes: (2) 0.5000004 Beveled Insulating Washer 0.7500077 Contact Rod 6-32 x 1.250 BOO0096 Teflon® Tubing, #8 Thin Wall (2) 1.0031 6-32 Contact ReceptacleDoes not include O-Rings

3

6

8

9

7

6

5

5

7

4

11

12

1314

12

11

15

1

2

.555-28 STUB ACME-2G

.555-28 STUB ACME-2G

10

Page 57: AES Catalog

B-12

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” Double GO Pin 3/4” Double GO Box

SPECIFICATIONS AS20006Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 1 in. (25.4 mm)Tool weight 0.281 lb. (0.127 kg)Shipping length 7 in. (177.8 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Male (0.555-28 Stub ACME - 3G)Bottom connection Male (0.555-28 Stub ACME - 3G)

SPECIFICATIONS AS20008Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 5.687 in. (144.463 mm)Tool weight 0.438 lb. (0.199 kg)Shipping length 11.687 in. (296.8498 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Female (0.555-28 Stub ACME - 3G)Bottom connection Female (0.555-28 Stub ACME - 3G)

AS20006

AS20008

Page 58: AES Catalog

B-13

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” GO Pin to 11/16” AES Box 3/4” GO Box to 11/16” AES Pin1

5

2

Ref. Part No. Description 1 AS10007 3/4” GO Pin to 11/16” AES Box Complete Assy 2 AS10009 3/4” GO Box to 11/16” AES Pin Complete Assy 3 KIT-10007* Complete Kit Assy 4 KIT-10009* Complete Kit Assy 5 CON0004 Banana Plug, 6-32 Female 6 0.4370001 Insulating Washer 7 BOO0096 Teflon® Tubing, #8 Thin Wall 8 1.0202 Contact Rod, 6-32 x 1.900 9 OOV00110-95 O-Rings: 110 V9510 0.6870003 Contact Insulator11 0.6870072 6-32 Threads Contact Receptacle12 0.6870062 Contact Sub Body13 OOV0012-95 Viton 95 O-Ring: 012 14 LBOO0032 Teflon® Tubing, #4 Thin Wall15 CON0011 Spring Loaded Contact16 0.6870002 Insulating Washer17 0.7500077 Contact Rod, 6-32 x 1.25018 0.5000004 Insulating Washer19 1.0031 6-32 Contact Receptacle20 0.6870063 Contact Sub Body

*Kit 10007 Includes: 0.4370001 Insulating Washer 0.6870003 Contact Insulator 0.6870072 6-32 Threads Contact Receptacle 1.0202 Contact Rod, 6-32 x 1.900 BOO0096 Teflon® Tubing, #8 Thin Wall CON0004 Banana Plug, 6-32 FemaleDoes not include O-Rings

*Kit 10009 Includes: 0.5000004 Insulating Washer 0.7500077 Contact Rod, 6-32 x 1.250 1.0031 6-32 Contact Receptacle 0.6870002 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0096 Teflon® Tubing, #8 Thin Wall CON0011 Spring Loaded ContactDoes not include O-Rings

3

6

78

9

10

11

12

413

14

15

7

17

18

19

20

.555-28 STUB ACME-3G

16

1/2” - 20 UNF-2B

1/2” - 20 UNF-2A

.555-28 STUB ACME-3G

Page 59: AES Catalog

B-14

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” GO Pin to 11/16” AES Box 3/4” GO Box to 11/16” AES Pin

SPECIFICATIONS AS10007Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 1.875 in. (47.625 mm)Tool weight 0.250 lb. (0.113 kg)Shipping length 7.875 in. (200.025 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Male (0.555-28 Stub ACME - 3G)Bottom connection Go TYPE Female (1/2” - 20 UNF)

SPECIFICATIONS AS10009Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 3.875 in. (98.425 mm)Tool weight 0.313 lb. (0.142 kg)Shipping length 9.875 in. (250.825 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection GO TYPE Male (1/2” - 20 UNF)Bottom connection Female (0.555-28 Stub ACME - 3G)

AS10007

AS10009

Page 60: AES Catalog

B-15

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” GO Pin to 11/16” AES Pin

Ref. Part No. Description 1 AS10008 3/4” GO Pin to 11/16” AES Pin Complete Assy 2 KIT-10008* Complete Kit Assy 3 CON0004 Banana Plug, 6-32 Female 4 0.4370001 Insulating Washer 5 BOO0096 Teflon® Tubing, #8 Thin Wall 6 OOV0110-95 Viton 95 O-Rings: 110 7 OOV0012-95 Viton 95 O-Rings: 012 8 LBOO0032 Teflon® Tubing, #4 Thin Wall 9 CON0011 Spring Loaded Contact10 0.6870002 Insulating Washer11 0.6870061 Contact Sub Body12 0.6870024 Contact Rod 6-32 x 2.000

* KIT-10008 Includes 0.4370001 Insulating Washer 0.6870002 Insulating Washer BOO0096 Teflon® Tubing, #8 Thin Wall 0.6870024 Contact Rod 6-32 x 2.000 LBOO0032 Teflon® Tubing, #4 Thin Wall CON0004 Banana Plug, 6-32 Female CON0011 Spring Loaded ContactDoes not include O-Rings

1

2

7

8

9

6

11

10

5

12

3

.555-28 STUB ACME-3G

1/2” - 20 UNF-2A

4

12

Page 61: AES Catalog

B-16

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS10008Tool diameter (O.D.) 11/16 in. (17.463 mm)Tool length 1.030 in. (26.162 mm)Tool weight 0.250 lb. (0.113 kg)Shipping length 7.030 in. (178.562 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1/2” - 20 UNF)Bottom connection Male (0.555-28 Stub ACME 3G)

3/4” GO Pin to 11/16” AES Pin

Page 62: AES Catalog

B-17

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” AES Tear Drop to 3/4” Pipe Recovery Systems Chemical Cutter 3/4” GO Box to 3/4” Pipe Recovery Systems Chemical Cutter Ref. Part No. Description 1 AS20012 3/4” AES Tear Drop to 3/4” Pipe Recovery Systems Chemical Cutter 2 AS20013 3/4” GO Box to 3/4” Pipe Recovery Systems Chemical Cutter 3 KIT-20012* Complete Kit Assy 4 KIT-20013* Complete Kit Assy 5 PSA011 Contact Assembly 6 OOV0013-95 Viton 95 O-Rings: 013 7 0.6870002 Insulating Washer 8 0.7500046 Contact Sub Body 9 BOO0096 Teflon® Tubing, #8 Thin Wall10 0.7500078 Contact Rod 6-32 x 3.25011 0.4370001 Insulating Washer12 0.7500029 6-32 Cone Nut13 0.6250061 Contact Rod 6-32 x 1.12514 0.5000004 Insulating Washer15 1.0031 6-32 Contact 16 0.7500067 Contact Sub Body17 LBOO0032 Teflon® Tubing, #4 Thin Wall

*KIT-20012 Includes: 0.7500029 6-32 Cone Nut 0.7500078 Contact Rod 6-32 x 3.250 0.4370001 Insulating Washer 0.6870002 Insulating Washer BOO0096 Teflon® Tubing, #8 Thin Wall PSA011 Contact Assembly LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

*KIT-20013 Includes: 0.5000004 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0096 Teflon® Tubing, #8 Thin Wall 0.6870002 Insulating Washer 1.0031 6-32 Contact PSA011 Contact Assembly 0.6250061 Contact Rod 6-32 x 1.125Does not include O-Rings

1

3

517

6

7

8

9

10

11

12

2

4

5 6

17

7

9

14

15

16

.555-28 STUB ACME-3G

21/32”-16 STUB ACME-2G

11/16”-28 STUB ACME-2G

21/32”-16 STUB ACME-2G

13

Page 63: AES Catalog

B-18

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” AES Tear Drop to 3/4” Pipe Recovery Systems Chemical Cutter 3/4” GO Box to 3/4” Pipe Recovery Systems Chemical Cutter

SPECIFICATIONS AS20012Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 0.770 in. (19.558 mm)Tool weight 0.344 lb. (0.156 kg)Shipping length 6.770 in. (171.958 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Male (21/32”-28 Stub ACME - 2G)Bottom connection Male Tear Drop (11/16”-28 Stub ACME - 2G)

SPECIFICATIONS AS20013Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 2.883 in. (73.228 mm)Tool weight 0.344 lb. (0.156 kg)Shipping length 8.883 in. (225.282 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Male (21/32”-16 Stub ACME - 2G)Bottom connection Female (0.555-28 Stub ACME - 3G)

AS20012

AS20013

Page 64: AES Catalog

B-19

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

3/4” GO Pin to 3/4” Pipe Recovery Systems Chemical Cutter Ref. Part No. Description 1 AS20011 3/4” GO Pin to 3/4” Pipe Recovery Systems Chemical Cutter 2 KIT-20011* Complete Kit Assy 3 OOV0013-95 Viton 95 O-Rings: 013 4 LBOO0032 Teflon® Tubing, #4 Thin Wall 5 PSA011 Spring Loaded Contact Assy 6 CON0004 6-32 Banana Plug, Female 7 BOO0096 Teflon® Tubing, #8 Thin Wall 8 0.7500072 6-32 Contact Rod 2 5/8” Lg. 9 0.7500038 Contact Sub Body10 OOV0110-95 Viton 95 O-Rings: 11011 0.4370001 Insulating Washer12 0.6870002 Insulating Washer

* KIT-20011 Includes: 0.4370001 Insulating Washer 0.6870002 Insulating Washer 0.7500072 6-32 Contact Rod 2 5/8” Lg. LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0096 Teflon® Tubing, #8 Thin Wall CON0004 6-32 Banana Plug, Female PSA011 Spring Loaded Contact AssyDoes not include O-Rings

1

5

2

4

3

12

7

8

9

10

11

6

21/32”-16 STUB ACME-3G

.555-28 STUB ACME-3G

Page 65: AES Catalog

B-20

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS20011Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 1 in. (25.4 mm)Tool weight 0.313 (0.142 kg)Shipping length 7 in. (177.8 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Male (21/32” - 16 Stub ACME - 2G) Bottom connection Male (.555 - 28 Stub ACME - 3G)

3/4” GO Pin to 3/4” Pipe Recovery Systems Chemical Cutter

Page 66: AES Catalog

B-21

COMPONENTS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

5/8” AES Pin to 3/4” Pipe Recovery Systems Chemical Cutter Ref. Part No. Description 1 AS20001 5/8” AES Pin to 3/4” Pipe Recovery Systems Chemical Cutter 2 KIT-20001* Complete Kit Assy 3 OOV0013-95 Viton 95 O-Rings: 013 4 0.7500016 Contact Sub Body 5 OOV0012-95 Viton 95 O-Rings: 012 6 0.7500024 Contact Sub Body 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 CON0011 Spring Loaded Contact 9 BOO0096 Insulating Sleeve10 0.6870090 Contact Insulator11 PSA003 Contact Kit

*KIT-20001 Includes 0.6870090 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0096 Insulating Sleeve CON0011 Spring Loaded Contact PSA003 Contact KitDoes not include O-Rings

1

11

2

9

3

4

10

5

6

5

7

8

21/32” - 16 STUB ACME-2G

1/2” - 20 UNF-2A

Page 67: AES Catalog

B-22

SPECIFICATIONS

<< Return to Section B Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS20001Tool diameter (O.D.) 3/4 in. (19.05 mm)Tool length 1.583 in. (40.208 mm)Tool weight 0.344 lb. (2.156 kg)Shipping length 7.583 in. (192.6082 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa) Top connection Male (21/32” - 16 Stub ACME - 2G)Bottom connection Go TYPE Male (1/2” - 20 UNF)

5/8” AES Pin to 3/4” Pipe Recovery Systems Chemical Cutter

Page 68: AES Catalog
Page 69: AES Catalog

<< Return to Main Menu

SECTION C

1”Table of Contents - 1”

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

PAGE TOOLCABLE HEADSC-1 1” Cable Head Assembly (Clamp Ring)

SINKER BARSC-3 1”x5’ Sinker Bar Assembly 1”x5’ Tungsten Sinker Bar Assembly 1”x7’ Tungsten Sinker Bar Assembly

CASING COLLAR LOCATORSC-5 1” Casing Collar Locator Assembly (NG)C-7 1” Casing Collar Locator Assembly (G)

FREE POINT TOOLS & ACCESSORIESC-9 1” Free Point Complete Assembly 1” Free Point Complete Magnet SectionC-11 1” Slack Joint Section Complete AssemblyC-13 1” Upper & Lower Bow Spring Complete AssemblyC-15 1” Upper Magnet Section Complete Assembly 1” Lower Magnet Section Complete Assembly 1” Magnet Tool Extension Complete AssemblyC-17 1” Free Point Sensor Section Complete Assembly (Boot)C-19 1” Free Point Sensor Section Complete Assembly (Piston)C-21 1” GO Bull Plug AssemblyC-23 1” AES Combination Diode Sub AssemblyC-25 1” Shot Rod Hanger Assembly (3/8” Rod)

KNUCKLE JOINTS, SWIVELS, SKATES & SHOCK SUBSC-27 1” Knuckle Joint Complete AssemblyC-29 1” Swivel Assembly

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBSC-31 11/16” AES Pin To 1” GO Box 11/16” AES Box to 1” GO PinC-33 1” GO Tear Drop to 1” GO Pin 1” GO Tear Drop to 1” GO BoxC-35 1” GO Double Pin Assembly 1” GO Double Box AssemblyC-37 1” GO Firing Sub AssemblyC-39 1” GO Double Sealed Tear Drop AssemblyC-41 5/8” Sucker Rod Box to 1” GO Box 5/8” Sucker Rod Pin to 1” GO Box 5/8” Sucker Rod Box to 1” GO Pin Assembly 5/8” Sucker Rod Pin to 1” GO Pin Assembly

Page 70: AES Catalog

C-1

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

CABLE HEAD

1” Cable Head Assembly (Clamp Ring)7

Ref. Part No. Description 1 AS30003* 1” Cable Head Complete Assy (Clamp ring) 2 1.0096 1” Cable Head Body 1.0096-1/4 1” Cable Head Body (1/4” Line) 1.0096-1/8 1” Cable Head Body (1/8” Line) 1.0096-7/32 1” Cable Head Body (7/32”, 3/16” Line) 1.0096-3/8 1” Cable Head Body (3/8” Line) 1.0096-5/16 1” Cable Head Body (5/16” Line) 1.0096-5/16M 1” Cable Head Body (5/16” M Line) 1.0096-7/32 1” Cable Head Body (7/32” Line) 1.0096-9/32 1” Cable Head Body (9/32” Line) 1.0096-7/16 1” Cable Head Body (7/16” Line) 3 1.0077 1” Rope Socket Body (5/16” Line) 1.0077-2 1” Rope Socket Body (3/8” Line) 1.0077-3 1” Rope Socket Body (7/16” Line) 1.0099 1” Rope Socket Body (3/16”, 7/32” Line) 1.0099-1/8 1” Rope Socket Body (1/8” Line) 1.0099-1/4 1” Rope Socket Body (1/4” Line) 1.0099-9/32 1” Rope Socket Body (9/32” Line) 4 HOO0080 5/16” -24” Socket Set Screw 5 1.0076 1” Clamp Ring (5/16” Line) 1.0076-2 1” Clamp Ring (3/8” Line) 1.0076-3 1” Clamp Ring (7/16” Line) 1.0098 1” Clamp Ring (3/16”, 7/32” Line) 1.0098-1/4 1” Clamp Ring (1/4” Line) 1.0098-9/32 1” Clamp Ring (9/32” Line) 6 AS30001 1” Tear Drop Sub Assy 7 EXP014 1” Rope Socket Tool 8 1.0078 1” Thread Protector, Pin (Not Shown) 9 OOV00115-95 Viton O-Ring 95: 11510 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot*Specify line size when ordering*** Sold Seperately

KIT-30001 Includes: 1.0042 Insulator Plunger GO Pin LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 1.0033 Contact Plunger 1.0037 Contact Spring (3) 1.0041 Insulating Washer 1.3750030 TD Cone Nut HOO0095 10-32 x 2” Pan Head Screw, S.S.Does not include O-Rings

6

8

1

2

3

4

5

13/16” -16 UN

9

10

Page 71: AES Catalog

C-2

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

CABLE HEAD

1” Cable Head Assembly (Clamp Ring)

SPECIFICATIONS AS30003Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 11.156 in. (283.362 mm)Tool weight 1.875 lbs. (0.850 kg) Shipping length 17.156 in. (435.7624 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Male (13/16” - 16 UN)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical and electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

Page 72: AES Catalog

C-3

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

SINKER BAR

1” Sinker Bar

Ref. Part No. Description 1 AS30004 1” x 5’ Steel Sinker Bar Assy 1.0065 1” c 5’ Sinker Bar Body AS30016 1” x 5’ Tungsten Sinker Bar Assy AS30017 1” x 7’ Tungsten Sinker Bar Assy 2 KIT-30004* Complete Kit Assy (5’ Steel Plunger) KIT-30004* Complete Kit Assy (5’ Tungsten Plunger) KIT-30017** Complete Kit Assy (7’ Tungsten Plunger) 3 1.0087B 10–32 Contact Receptacle 4 1.0086 Beveled Insulating Washer 5 LBOO0032 Teflon® Tubing, #4 Thin Wall 6 1.0221ASSY 10–32 Contact Rod (5’ Sinker Bar) CR10X81250 Contact Rod (7’ Sinker Bar) 7 1.0041 Insulating Washer 8 1.3750081 10–32 Spacer Contact 9 1.0042 Contact Insulator10 OOV0115-95 Viton 95 O-Ring: 11511 1.0037 Contact Spring12 HOO0065 Retainer Ring13 LAF00011 Contact Plunger14 1.0078 1” Thread Protector, Pin (Not Shown)15 1.0079 1” Thread Protector, Box (Not Shown)16 LAF00128 Insulating Washer

*KIT-30004 Includes: 1.0086 Beveled Insulating Washer 1.0221ASSY 10–32 Contact Rod (5’ Sinker Bar) LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087B 10–32 Contact Receptacle HOO0065 Retainer Ring 1.3750081 10–32 Spacer Contact Does not include O-Rings Specify length when ordering

**KIT-30017 Includes: 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00011 Contact Plunger 1.0037 Contact Spring (1) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087B 10–32 Contact Receptacle HOO0065 Retainer Ring 1.3750081 10–32 Spacer Contact CR10X81250 Contact Rod LAF00128 Insulating WasherDoes not include O-Rings Specify length when ordering

4

3

15

5

6

10

7

9

8

11

12

13/16” - 16UN-2A

13/16” - 16UN-2B

16

12

13

14

Page 73: AES Catalog

C-4

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

SINKER BAR

1” Sinker Bar

SPECIFICATIONS AS30004Tool diameter (O.D.) 1.000 in. (25.4 mm)Tool length 60.00 in (1524 mm)Tool weight 12.5 lbs. (5.69 kg) Shipping length 66 in. (1676.4 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN) Bottom connection Go TYPE Male (13/16” - 16 UN)

SPECIFICATIONS AS30016Tool diameter (O.D.) 1.000 in. (25.4 mm)Tool length 60.00 in. (1524 mm)Tool weight 18 lbs. (8.164 kg) Shipping length 66 in. (1676.4 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN)Bottom connection Go TYPE Male (13/16” - 16 UN)

SPECIFICATIONS AS30017Tool diameter (O.D.) 1.000 in. (25.4 mm)Tool length 84.00 in. (2133.6 mm)Tool weight 25 lbs. (11.34 kg) Shipping length 90 in. (2286 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN)Bottom connection Go TYPE Male (13/16” - 16 UN)

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Steel and tungsten models available

Page 74: AES Catalog

C-5

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

CASING COLLAR LOCATOR

1” Casing Collar Locator (Non-Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS30008 1” Casing Collar Locator Complete Assy (NG) 2 1.0055 CCL Insulator 3 1.0054 End Contact Receptacle 4 HOO0094 6–32 x 3/16” Pan Head Screw S.S. 5 HOO0038 Solder Lug 6 1.0058 CCL Contact Insulator 7 HOO0095 10–32 x 2” Pan Head Screw S.S. 8 1.0056 1” CCL Magnet 9 PSA040 Coil Assy (NG)10 1.0059 1” CCL Housing11 SEM0014 Diode12 AS30008-1 1” CCL Coil and Magnet Assy (NG)13 1.0079 1” Thread Protector, Box (Not Shown)

KIT-30008 Includes: (2) 1.0054 End Contact Receptacle (2) 1.0058 CCL Contact Insulator (2) HOO0038 Solder Lug (2) 1.0055 CCL Insulator (2) HOO0094 6–32 x 3/16” Pan Head Screw S.S. (2) HOO0095 10–32 x 2” Pan Head Screw S.S.Does not include O-Rings

2

13/16” - 16UN-2B

19 12

2

3

4

6

7

8

5

11

3

4

6

7

8

10

5

1313/16” - 16UN-2B

13

Page 75: AES Catalog

C-6

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS30008Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 12.75 in. (323.85 mm)Tool weight 2.4 lbs. (1.089 kg)Shipping length 15.75 in. (400.05 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance 1.4K - 1.6K OhmsTop connection Go TYPE Female (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN) Sensor measure point 5.875 in. (149.225 mm) from bottom of tool

1” Casing Collar Locator (Non-Grounded)

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

Page 76: AES Catalog

C-7

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

CASING COLLAR LOCATOR

1” Casing Collar Locator (Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS30014 1” Casing Collar Locator Complete Assy (G) 2 AS30014-1 Coil/Magnet Assy (G) 3 1.0172 Upper Contact Receptacle 4 HOO0004 4–40 x 1/8” Pan Hd. Screw 5 HOO0038 Solder Lug 6 1.0074 End Insulator 7 SEM0069 Double Diode 8 1.0056 1” CCL Magnet 9 BOO0096 Insulating Sleeve10 1.0104 6–32 Contact Rod11 1.0059 1” CCL Housing12 HOO0126 Ground Spring13 1.0073 1” CCL Insulator14 1.0231 CCL Lower Contact15 1.0056G CCL Ground Magnet16 PSA041 CCL Coil Assy (G)17 1.0079 1” Thread Protector, Box (Not Shown)

KIT-30014 Includes: 1.0073 1” CCL Insulator 1.0074 End Insulator HOO0126 Ground Spring 1.0104 6–32 Contact Rod 1.0172 Upper Contact Receptacle 1.0231 CCL Lower Contact BOO0096 Insulating Sleeve (3) HOO0004 4–40 x 1/8” Pan Hd. Screw SEM0069 Double Diode HOO0038 Solder LugDoes not include O-Rings

13/16” - 16UN-2B

13/16” - 16UN-2B

1

14

15

13

12

4

16

11

3

5

7

17

8

9

10

4

6

2

17

Page 77: AES Catalog

C-8

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

CASING COLLAR LOCATOR

The 1” Casing Collar Locator (G) detects casing collars and perforations in tubing or casing.

SPECIFICATIONS AS30014

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers , centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnet is disturbed and includes a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Compatible with many surface systems• Depth Correlation • Can be run with perforating services and free point back off

Tool diameter (O.D.) 1 in. (25.4mm)Tool length 12.75 in. (323.85 mm)Tool weight 2.4 lbs (1.089 kg)Shipping length 15.75 in. (400.05 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance 1.4K - 1.6K Ohms.Top connection GO Type Female (13/16-16 UN) Bottom connection GO Type Female (13/16-16 UN) Sensor measure point 5.875 in. (149.225 mm) from bottom of tool

1” Casing Collar Locator (Grounded)

Page 78: AES Catalog

C-9

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

FREE POINT

1” Free Point Assembly

2

3

2

9

3

11

10

1 1

1” Free Point Magnet Tool Assembly

4

7

5

8

12 13

Ref. Part No. Description 12 AS300FP 1” Free Point Tool Assy 1 AS30009 1” Slack Joint Section Complete Assy 2 AS30012 1” Upper & Lower Bow Spring Complete Assy 3 AS30011 1” Sensor Section Complete Assy (Boot) 4 AS30006 1” Bull Plug Grounding 5 AS30022 1” Combination Diode Sub 6 AS30002 1” Shot Rod Hanger 7 1.3750131 Shot Rod 3/8 x 5 Feet 8 1.0125 1” Shot Rod Plug F/3/8” Rod14 AS30037 1” Shot Rod Assembly

OPTIONS: AS30011PC Sensor Section - Piston Compensation

Ref. Part No. Description 13 AS300FPM 1” Free Point Magnet Tool Assembly 1 AS30009 1” Slack Joint Section Complete Assy 3 AS30011 1” Sensor Section Complete Assy (Boot) 6 AS30002 1” Shot Rod Hanger 7 1.3750131 Shot Rod 3/8 x 5 Feet 9 AS30031 1” Upper Magnet Section Assy 8 1.0125 1” Shot Rod Plug F/3/8” Rod10 AS30032 1” Lower Magnet Section Assy11 AS30033 1” Magnet Extension Assy14 AS30037 1” Shot Rod Assembly

OPTIONS: AS30011PC Sensor Section - Piston Compensation

146

7

614

8

Page 79: AES Catalog

C-10

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Assembly1” Free Point Magnet Tool Assembly

SPECIFICATIONS AS400FPTool diameter (O.D.) 1 in. (25.4 mm)Tool length 124 - 137 in (3149.6 - 3479.8 mm)Tool weight 23.6 lbs. (10.693 kg) Shipping length (closed) 130 in. (3302 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN) Bottom connection Go TYPE Female (13/16” - 16 UN)

SPECIFICATIONS AS300FPMTool diameter (O.D.) 1 in. (25.4 mm)Tool length 106.3 - 119.3 in. (2700.02 - 3030.22 mm)Tool weight 20.43 lbs. (9.267 kg) Shipping length (closed) 112.3 in. (2852.42 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (138 MPa)Top connection Go TYPE Male (13/16” - 16 UN)

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a sensor section to determine stuck point. Additional components that can be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

AS300FP AS300FPM

FREE POINT

Page 80: AES Catalog

C-11

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Slack Joint

Ref. Part No. Description 1 AS30009 1” AES Slack Joint Complete Assy 2 KIT-30009* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 OOV0115-95 Viton 95 O-Rings: 115 9 1.0001 1” Slack Joint Top Sub 10 LBOO0032 Teflon® Tubing, #4 Thin Wall 11 HOO0316 10-32 x 2.500 Pan Head S.S. 12 HOO0046 10-32 x 1/8” Socket Set Screw, Alloy 13 HOO0004 4-40 x 1/8” Socket Set Screw, Alloy 14 1.3750139 10-32 Cone Nut 15 HOO0141 6-32 x 1/8” Socket Set Screw, Alloy 16 1.0002 1” Slack Joint Housing 17 WIR1040-1.00 Electrical Spring 18 1.0126 6-32 Cone Nut 19 BOO0096 Teflon® Tubing, #8 Thin Wall 20 1.0224 6-32 Contact Rod 21 1.0005 Slack Joint Inner Mandrel End Connection 22 OOV0012-95 Viton 95 O-Rings: 012 23 HOO0046SS 10-32 x 1/8” Socket Set Screw S.S. 24 1.0004 Slack Joint Inner Mandrel 25 1.0003 Slack Joint Guide 26 1.0003A Slack Joint Key 27 HOO0170 6-32 x 1/4” Button Head Screw 28 HOO0050 10-32 x 1/4” Set Screw 29 1.0169 Contact Insulator 30 1.0095 S.S. Contact 31 1.0006 Inner Mandrel Connection Sub32 1.0078 1” Thread Protector, Pin (Not Shown)33 1.0079 1” Thread Protector, Box (Not Shown)34 LAF00128 Insulating Washer

*KIT-30009 Includes 1.0037 Contact Spring (3) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0095 S.S. Contact 1.0224 6-32 Contact Rod 1.3750139 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall BOO0096 Teflon® Tubing, #8 Thin Wall HOO0316 10-32 x 2.500 Pan Head S.S. LAF00011 Contact Plunger 1.0126 6-32 Cone Nut 1.0169 Contact Insulator HOO0065 Retainer Ring, #51 (2) HOO0141 6-32 x 1/8” Socket Set Screw, Alloy LAF00128 Insulating WasherDoes not include O-Rings.

1

2

3133

3029

23

2827

26

25

12

24

23

22

13

1815

21

20

195

15

14

13

5

5

34

1211

98

10

7

6

432

3

16 17

13/16”-16 UN-2B

13/16”-16 UN-2A FREE POINT

Page 81: AES Catalog

C-12

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Slack Joint

SPECIFICATIONS AS30009Tool diameter (O.D.) 1 in. (25.4 mm)Tool length (closed/open) 38.476 - 51.476 in. (977.290 - 1307.490 mm)Tool weight 5.406 lbs. (2.452 kg)Shipping length (closed) 44.476 in. (1129.6904 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN) Bottom connection Go TYPE Female (13/16” - 16 UN)

DESCRIPTION The Free Point Slack Joint provides a means of removing the weight of the wireline from the freepoint sensor downhole. It consists of two cylindrical telescoping sleeves and a coiled spring wire for an electrical path. When the slack joint is in midstroke; the weight of the wireline does not effect the FP sensor.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies. • Available in 16” and 24” stroke

FREE POINT

Page 82: AES Catalog

C-13

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Upper & Lower Bow Spring

Ref. Part No. Description 1 AS30012 1” Upper or Lower Bow Spring Section Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 1.0042 Contact Insulator 6 1.0037 Contact Spring 7 OOV0115-95 Viton 95 O-Rings: 115 8 1.0040 Contact Receptacle 9 1.0007 Spring Mandrel Connection Sub, Upper 10 BOO0096 Teflon® Tubing, #8 Thin Wall 11 1.0207 Contact Rod 6-32 x 29.750 12 OOV0012-95 Viton 95 O-Rings: 012 13 HOO0046 10-32 x 1/8” Socket Set Screw, Alloy 14 1.0010 Adjustment Nut 15 1.0009 1” Freepoint Compression Sleeve 16 1.0011 1” Compression Sleeve Washer 17 HOO0093 1” Freepoint Compression Spring 18 HOO0048 10-32 x 3/16” Button Head Cap Screw, Alloy 19 1.0013 Spring Adjustment Sleeve 20 1.0012 1” Freepoint Bow Spring Collar 21 OMF0003 5/8” x 16” Bow Spring-Slick 22 OMF0003-1 5/8” x 16” Bow Spring-Carbide 23 1.0014 Adjustment Collar 24 1.0008 1” Freepoint Bow Spring Mandrel 25 1.0015 1” Freepoint Bow Spring Anchor 26 1.0043 Contact Insulator 27 1.0095 Contact Receptacle, 6-32 28 KIT-30012* Complete Kit Assy 29 1.0078 1” Thread Protector, Pin (Not Shown)30 1.0079 1” Thread Protector, Box (Not Shown)31 LAF00128 Insulating Washer

*KIT-30012 Includes: 1.0042 Contact Insulator 1.0043 Contact Insulator 1.0207 Contact Rod 6-32 x 29.750 BOO0096 Teflon® Tubing, #8 Thin Wall HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.0040 Contact Receptacle 1.0041 Insulating Washer 1.0095 Contact Receptacle, 6-32 LAF00128 Insulating WasherDoes not include O-Rings.

27

11

10

13/16”-16 UN-2B

1

28

26

25

18

12

13

2423

22

21

19

13

20

17

16

15

14

8

65

31

3

13

2

12

9

4

7

30

29

13/16”-16 UN-2A

FREE POINT

Page 83: AES Catalog

C-14

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

SPECIFICATIONS AS30012Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 32.1 in. (815.34 mm)Tool weight 5.185 lbs. (2.352 kg)Shipping length 38.1 in. (967.74 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)Min I.D. 1.25 in. (31.75 mm)Max I.D. 5.5 in. (139.7 mm)

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

1” Free Point Upper & Lower Bow Spring

FREE POINT

Page 84: AES Catalog

C-15

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Magnet Tools

Ref. Part No. Description 1 AS30031* 1” Upper Magnet Section Complete Assy 2 AS30032 1” Lower Magnet Section Complete Assy 3 AS30033** 1” Magnet Tool Extension Complete Assy 4 LAF00011 Contact Plunger 5 HOO0065 Retainer Ring 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 OOV0115-95 Viton 95 O-Rings: 115 9 1.0037 Contact Spring10 1.3750081 Contact Receptacle11 1.0179 1” Upper Magnet Section Body12 LBOO0032 Teflon® Tubing, #4 Thin Wall13 1.0219 10-32 Contact Rod14 1.0086 Beveled Insulating Washer15 1.0087B Contact Receptacle16 1.0181 1” Magnet Extension Body17 HOO0317 Carbide Pad18 HOO0290 Magnet19 1.0078 1” Thread Protector, Pin (Not Shown)20 1.0079 1” Thread Protector, Box (Not Shown)21 LAF00128 Insulating Washer

*KIT-30031 Includes: (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0086 Beveled Insulating Washer 1.0087B Contact Receptacle 1.0219 10-32 Contact Rod HOO0065 Retainer Ring LAF00011 Contact Plunger 1.0037 Contact Spring 1.3750081 Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

**KIT-40087 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer HOO0065 Retainer Ring 1.0042 Contact Insulator LAF00128 Insulating WasherDoes not include O-Rings

8

7

19

19

19

4

8

9

10

13/16”-16 UN-2A

1

13/16”-16 UN-2B

2

3

5

6

21

11

12

13

14

15

20

20

13/16”-16 UN-2A

18

17

17

18

16

8

5

4

9

7

6

6

FREE POINT

Page 85: AES Catalog

C-16

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

SPECIFICATIONS AS30032Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 15.625 in. (396.875 mm)Tool weight 3.594 lbs. (1.63 kg) Shipping length 21.625 in. (549.275 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN) Bottom connection Go TYPE Female (13/16” - 16 UN)

SPECIFICATIONS AS30033Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 6.350 in. (415.29 mm)Tool weight 1.781 lbs. (0.808 kg) Shipping length 12.350 in. (313.69 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)

SPECIFICATIONS AS30031Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 13.25 in. (336.55 mm)Tool weight 2.873 lbs. (1.303 kg) Shipping length 19.25 in. (488.95 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN) Bottom connection Go TYPE Female (13/16” - 16 UN)

AS30031

AS30032

AS30033

1” Free Point Magnet Tools

FREE POINT

Page 86: AES Catalog

C-17

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Sensor (Boot)

Ref. Part No. Description 1 AS30011 1” Free Point Sensor Section Complete Assy (Boot) 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 OOV0115-95 Viton 95 O-Rings: 115 5 1.0041 Insulating Washer 6 1.0037 Contact Spring 7 1.0042 Contact Insulator 8 1.0016 Sensor Connection Sub 9 PSA019 Pressure Connection Contact Assy 10 CON0015M Pressure Connector (CON0015 Modified) 11 PSA051 Sensor Coil Assy 12 1.0018 Sensor Jam Nut 13 3.0013 Measuring Sensor 14 1.0038 Sensor Spring 15 3.0030 Insulator 16 HOO0077 Thrust Bearings 17 HOO0078 Thrust Washer 18 HOO0074 Bearings 19 1.0019 Sensor Mandrel 20 PSA028 Sensor Contact Thru Rod Assy 21 1.0021 Jam Nut 22 1.0022 Sensor Mandrel Boot Sub 23 BOO0050 Boot 24 1.0025 Boot Protector 25 1.0023 Sensor Mandrel Boot Seal 26 OOV0013 Viton 75 O-Rings: 013 27 1.0024 Boot Seal Cover 28 1.0044 Sensor Mandrel Jam Nut 29 HOO0050 10-32 x 1/4” Socket Set Screw, Alloy 30 OOV0011-95 Viton 95 O-Rings: 011 31 1.0027 Sensor Mandrel Connection Sub 32 1.3750031 Pressure Connection Insulator 33 HOO0298 6-32 x 5/8” Socket Head Cap Screw, Alloy 34 1.0020 Adjustment Nut 35 1.0017 Sensor Housing36 1.0078 1” Thread Protector, Pin (Not Shown)37 1.0079 1” Thread Protector, Box (Not Shown) 38 LAF00128 Insulating Washer

30

32

37

29

26

25

24

23

22

35

19

14

17

13

11

4

58

76

38

10

9

4

336

2

1

15

12

33

21

34

16

17

20

18

16

31

28

27

FREE POINT

Page 87: AES Catalog

C-18

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Sensor (Boot)

SPECIFICATIONS AS30033Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 22.6 in. (574.04 mm)Tool weight 3.924 lbs. (1.78 kg)Shipping length 28.6 in. (726.44 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a sensor section to determine stuck point. Additional components that can be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

FREE POINT

Page 88: AES Catalog

C-19

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Sensor (Piston)

Ref. Part No. Description 1 AS30011PC 1” Free Point Sensor Section Complete Assy (Piston) 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 OOV0115-95 Viton 95 O-Rings: 115 5 1.0041 Insulating Washer 6 1.0037 Contact Spring 7 1.0042 Contact Insulator 8 1.0016 Sensor Connection Sub 9 PSA019 Pressure Connection Contact Assy 10 CON0015M Pressure Connector (CON0015 Modified) 11 PSA051 Sensor Coil Assy 12 1.0018 Sensor Jam Nut 13 3.0013 Measuring Sensor 14 1.0038 Sensor Spring 15 3.0030 Insulator 16 HOO0077 Thrust Bearings 17 HOO0078 Thrust Washer 18 HOO0074 Bearings 19 1.0019 Sensor Mandrel 20 PSA028 Sensor Contact Thru Rod Assy 21 1.0021 Jam Nut 22 1.0022 Sensor Mandrel Boot Sub 23 BOO0096 Insulating Sleeve 24 1.0116 Piston Housing 25 OOV0016 Viton 70 O-Rings: 01626 OOV0013 Viton 75 O-Rings: 013 27 1.0115-2 Piston 28 1.0117 Jam Nut 29 HOO0050 10-32 x 1/4” Socket Set Screw, Alloy 30 OOV0011-95 Viton 95 O-Rings: 011 31 1.0027 Sensor Mandrel Connection Sub 32 1.3750031 Pressure Connection Insulator 33 HOO0298 6-32 x 5/8” Socket Head Cap Screw, Alloy 34 1.0020 Adjustment Nut 35 1.0017 Sensor Housing36 1.0078 1” Thread Protector, Pin (Not Shown)37 1.0079 1” Thread Protector, Box (Not Shown) 38 LAF00128 Insulating Washer

30

32

37

29

26

25

24

23

22

35

19

14

17

13

11

4

58

76

38

10

9

4

336

2

1

15

12

33

21

34

16

17

20

18

16

31

28

27

FREE POINT

Page 89: AES Catalog

C-20

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

1” Free Point Sensor (Piston)

SPECIFICATIONS AS30033PCTool diameter (O.D.) 1 in. (25.4 mm)Tool length 22.6 in. (574.04 mm)Tool weight 3.924 lbs. (1.78 kg)Shipping length 28.6 in. (726.44 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a sensor section to determine stuck point. Additional components that can be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

FREE POINT

Page 90: AES Catalog

C-21

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Grounded Bull Plug

Ref. Part No. Description 1 AS30006 1” Bull Plug Complete Assy 2 KIT-30006* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 LAF00128 Insulating Washer 6 OOV0115-95 Viton 95 O-Rings: 115 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.0030 Contact Sub Body

*KIT-30006 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring LAF00128 Insulating Washer 1.0042 Contact Insulator HOO0065 Retainer Ring, #51Does not include O-Rings

3

4

5

7

8

9

13/16”-16 UN-2A

2

1

6

FREE POINT

Page 91: AES Catalog

C-22

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

FREE POINT

1” Grounded Bull Plug

SPECIFICATIONS AS30006

Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 1.281 in. (32.537 mm)Tool weight 0.331 lb. (0.150 kg)Shipping length 7.281 in. (184.9374 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)

Page 92: AES Catalog

C-23

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Combination Diode Sub

Ref. Part No. Description 1 AS30022 1” AES Combination Diode Sub Complete Assy 2 KIT-30022* Complete Kit Assy 3 1.0033 Contact Plunger 4 HOO0181 Retainer Ring 5 0.5000005HT Insulating Washer SIE Ceramic 6 OOV0115-95 Viton 95 O-Rings: 115 7 1.0235 Contact Insulator 8 1.0037 Contact Spring 9 1.0051 Contact Sub Body10 PSA029-47 Diode Cartridge Assy (47 OHM)11 LBOO0032 Teflon® Tubing, #4 Thin Wall12 HOO0096 10-32 x 1-3/4 Pan Head Screw S.S.13 1.3750030 10-32 Cone Nut 14 1.0234 Insulating Washer15 1.0041 Insulator Washer

*KIT-30022 Includes: 0.5000005HT Insulating Washer SIE Ceramic LAF00011 Contact Plunger 1.0037 Contact Spring 1.0041 Insulator Washer 1.0234 Insulating Washer 1.0235 Contact Insulator HOO0096 10-32 x 1-3/4 Pan Head Screw S.S. 1.3750030 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0181 Retainer Ring PSA029-47 Diode Cartridge Assy (47 OHM)Does not include O-Rings

UP

1

2

3

4

14

6

7

8

9

10

15

11

12

5

13

13/16”-16 UN-2A

13/16”-16 UN-2A

FREE POINT

Page 93: AES Catalog

C-24

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS30022Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 2.5 in. (63.5 mm)Tool weight 0.69 lb (0.313 kg)Shipping length 8.5 in. (215.9 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Tear Drop Male (13/16” - 16 UN)

1” Combination Diode Sub

UP

Page 94: AES Catalog

C-25

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Shot Rod Hanger Assembly

2

3

4

Ref. Part No. Description 1 AS30037 1” Shot Rod Hanger Assy (3/8” Rod) 2 AS30002 1” Shot Rod Hanger Sub (13/16”-16 UN Threads) 3 1.3750131 3/8” x 5 Shot Rod (3/8”-16 UNC Threads)4 1.0125 1” Shot Rod Bull Plug

1

FREE POINT

Page 95: AES Catalog

C-26

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS30037Tool diameter (O.D.) 1 in. (25.4 mm)Tool length Varies by shot rodTool weight Available upon requestTemperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN)

1” Shot Rod Hanger Assembly

FEATURES • Various shot rod lengths available

Page 96: AES Catalog

C-27

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

ACCESSORY

1” Knuckle Joint Clvs

18

16

9

15

14

10

5

13

12

2

3 20

4

22

6

7

8

10

11

13

5

8

17

13/16”-16 UN-2B

13/16”-16 UN-2A

19

Ref. Part No. Description 1 AS30023 1” Knuckle Joint Complete Assy (Clvs) 2 AS30001 1” Tear Drop Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 OOV0115-95 Viton 95 O-Rings: 115 9 1.0087B 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 HOO0095 Contact Rod 10-32 x2 Pan Head Screw S.S.12 AS30023-1 Knuckle Joint Sub Assy13 1.3750030 10-32 Cone Nut14 1.3750431 Contact Rod 10-32 x 2.12515 1.0086 Beveled Insulating Washer16 1.0222 Contact Sub Body17 1.0050 Contact Sub Body18 AS30036 1” Tear Drop To GO Box Assy29 WIR1060 Signal Wire20 1.0078 1” Thread Protector, Pin (Not Shown)21 1.0079 1” Thread Protector, Box (Not Shown)22 LAF00128 Insulating Washer

KIT-30001 Includes: 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut HOO0095 Contact Rod 10-32 x2 Pan Head Screw S.S. LAF00128 Insulating WasherDoes not include O-Rings

KIT-30036 Includes: LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut 1.0087B 10-32 Contact Receptacle 1.0086 Beveled Insulating Washer 1.3750431 Contact Rod 10-32 x 2.125Does not include O-Rings

21

1

Page 97: AES Catalog

C-28

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

ACCESSORY

SPECIFICATIONS AS30023Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 16.484 in. (418.694 mm)Tool weight 2.37 lbs. (1.075 kg)Shipping length 22.484 in. (571.0936 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

1” Knuckle Joint Clvs

Page 98: AES Catalog

C-29

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” Swivel AssemblyRef. Part No. Description1 AS30043 Swivel Assembly2 5929 Swivel Conntion Sub 3 5908 FP Sensor Housing4 5907 FP Set Mandrel5 HOO0078 FP Sensor Thrust Washer6 HOO0077 Roller Bearing7 HOO0074 FP Sensor Bearing8 5909 Swivel Piston Housing9 5910 Sensor Piston10 5911 Go box Adapter Sub11 HOO0065 Retainer Ring 12 LAF00011 Contact Plunger13 1.0041 Insulating Washer14 1.0037 Contact Spring15 1.0042 Plunger Insulator16 PSA019 Brass Contact Assy17 HOO0255 Retainer Ring18 CON0061MOD Kemlon CON0061 Modified19 OOV0012-95 Viton 95 O-Ring: 012 20 OOV0013-75 Viton 75 O-Ring: 01321 OOV0016-75 VIiton 75 O-Ring: 01622 OOV0115-95 Viton 95 O-Ring: 11523 PSA 137 Pre Sub Assembly 24 LAF00128 Insulating Washer

1

12

22

22

4 5

7

8

6

209

17

19

18

16

14

16

13/16”-16UN-2A

13/16”-16UN-2A

2

13

24

10

21

13

15

22

SWIVELS

Page 99: AES Catalog

C-30

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

SPECIFICATIONS AS30043Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 10.660 in. (270.764 mm)Tool weight Available upon request Shipping length 16.66 in. (423.164 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

1” Swivel Assembly

SWIVELS

Page 100: AES Catalog

C-31

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

ADAPTOR

11/16” AES Pin To 1” GO Box 11/16” AES Box To 1” GO PinRef. Part No. Description 1 AS00010 AES 11/16” Pin to 1” GO Box Assy 2 AS30034 AES 11/16” Box to 1” GO Pin Assy 3 KIT-00010* Complete Kit Assy 4 KIT-30034* Complete Kit Assy 5 CON0011 Spring Loaded Contact 6 OOV0012-95 Viton 95 O-Rings: 012 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 0.6870072 6-32 Contact 9 BOO0101 Teflon® Tubing, #8 Light Wall10 1.0186 Contact Rod 6-32 x 1.50011 1.0086 Beveled Insulating Washer12 1.0031 6-32 Contact Receptacle13 LAF00011 Contact Plunger14 HOO0065 Retainer Ring15 1.0041 Insulating Washer16 1.0042 Contact Insulator17 1.0037 Contact Spring18 OOV0115-95 Viton 95 O-Rings: 11519 1.0040 6-32 Spacer Contact20 0.6870003 Contact Insulator21 0.6870024 Contact Rod 6-32 x 2.00022 1.0130 Contact Sub Body23 1.0185 Contact Sub Body24 0.6870002 Insulating Washer25 LAF00128 Insulating Washer

*KIT-00010 Includes: 0.6870002 Insulating Washer BOO0101 Teflon® Tubing, #8 Light Wall 1.0031 6-32 Contact Receptacle 1.0086 Beveled Insulating Washer 1.0186 Contact Rod 6-32 x 1.500 LBOO0032 Teflon® Tubing, #4 Thin Wall CON0011 Spring Loaded ContactDoes not include O-Rings

*KIT-30034 Includes: 0.6870024 Contact Rod 6-32 x 2.000 LAF00011 Contact Plunger BOO0101 Teflon® Tubing, #8 Light Wall HOO0065 Retainer Ring 0.6870003 Contact Insulator 0.6870072 6-32 Contact 1.0037 Contact Spring 1.0040 6-32 Spacer Contact 1.0041 Insulating Washer 1.0042 Contact Insulator LAF00128 Insulating WasherDoes not include O-Rings

1

3

5

6

7

24

9

10

11

12

22

2

4

13

14

25

16

18

17

19

15

9

21

23

20

8

13/16” - 16 UN-2B

1/2” - 20 UNF-2A

1/2” - 20 UNF-2B

13/16” - 16 UN-2A

Page 101: AES Catalog

C-32

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

ADAPTOR

11/16” AES Pin To 1” GO Box 11/16” AES Box To 1” GO Pin

SPECIFICATIONS AS00010

Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 4.187 in (106.35 mm)Tool weight 0.625 lbs. (1.378 kg)Shipping length 10.187 in. (258.7498 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1/2” - 20 UNF)Bottom connection Go TYPE Female (13/16” - 16 UN)

SPECIFICATIONS AS30034Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 3.937 in (100 mm)Tool weight 0.86 lbs. (1.896 kg)Shipping length 9.937 in. (252.3998 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (1/2” - 20 UNF)

AS30034

AS300010

Page 102: AES Catalog

C-33

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” GO Tear Drop to 1” GO Pin 1” GO Tear Drop to 1” GO BoxRef. Part No. Description 1 AS30001 1” GO Tear Drop to 1” GO Pin Complete Assy 2 KIT-30001* Complete Kit Assy 3 1.3750030 10-32 Cone Nut 4 LBOO0032 Teflon® Tubing, #4 Thin Wall 5 HOO0095 10-32 X 2.000 Pan Head Screw S.S. 6 1.0050 Contact Sub Body 7 1.0041 Insulating Washer 8 1.0042 Contact Insulator 9 1.0037 Contact Spring10 OOV0115-95 Viton 95 O-Rings: 11511 LAF00011 Contact Plunger12 HOO0065 Retainer Ring13 AS30036 1” GO Tear Drop To 1” GO Box Assy14 1.3750431 Contact Rod 10-32 x 2.12515 1.0086 Beveled Insulating Washer 16 1.0087B 10-32 Contact Receptacle17 1.0222 Contact Sub Body18 KIT-30036* Complete Kit Assy 19 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot 20 LAF00128 Insulating Washer ***Sold Separately

*KIT-30001 Includes: 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0095 10-32 X 2.000 Pan Head Screw S.S. LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut HOO0065 Retainer Ring LAF00128 Insulating WasherDoes not include O-Rings

*KIT-30036 Includes: LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut 1.0087B 10-32 Contact Receptacle 1.0086 Beveled Insulating Washer 1.3750431 Contact Rod 10-32 x 2.125Does not include O-Rings

1

3

7

4

5

6

7

8

9

11

20

12

10

2

13

18

3

7

4

14

15

16

17

13/16” - 16 UN-2A

13/16” - 16 UN-2A

13/16” - 16 UN-2A

13/16” - 16 UN-2B

19

ADAPTOR

Page 103: AES Catalog

C-34

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

SPECIFICATIONS AS30001Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 1.155 in. (29.337 mm)Tool weight 0.46 lbs. (0.209 kg)Shipping length 7.155 in. (181.737 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (13/16” - 16 UN)Bottom connection Go TYPE Male (13/16” - 16 UN)

1” GO Tear Drop to 1” GO Pin 1” GO Tear Drop to 1” GO Box

SPECIFICATIONS AS30036

Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 2.875 in. (73.025 mm)Tool weight 0.400 lbs. (0.181 kg)Shipping length 8.875 in. (225.425 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

AS30001 AS30036

ADAPTOR

Page 104: AES Catalog

C-35

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” GO Double Pin1” GO Double Box Ref. Part No. Description 1 AS30005 1” GO Double Pin Complete Assy 2 AS30018 1” GO Double Box Complete Assy 3 KIT-30005* Complete Kit Assy 4 KIT-30018* Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring 7 LAF00128 Insulating Washer 8 1.0028 Contact Insulator 9 1.0037-1 Contact Spring10 1.0062 Contact Sub Body11 OOV0115-95 Viton 95 O-Rings: 01512 1.0087B 10-32 Contact Receptacle13 1.0086 Beveled Insulating Washer14 LBOO0032 Teflon® Tubing, #4 Thin Wall15 1.3750433 Contact Rod 10-32 x 1.20016 1.0103 Contact Sub Body

*KIT-30005 Includes: (2) LAF00011 Contact Plunger (2) LAF00128 Insulating Washer (2) HOO0065 Retainer Ring 1.0028 Contact Insulator 1.0037-1 Contact SpringDoes not include O-Rings

*KIT-30018 Includes: (2) 1.0087B 10-32 Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall (2) 1.0086 Beveled Insulating Washer 1.3750433 Contact Rod 10-32 x 1.200Does not include O-Rings

2

4

12

13

14

15

13

12

16

3

10

5

6

7

11

8

9

11

7

65

1

13/16”-16 UN-2A

13/16”-16 UN-2B

ADAPTOR

Page 105: AES Catalog

C-36

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

ADAPTOR

1” GO Double Pin1” GO Double Box

SPECIFICATIONS AS30005Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 1.69 in. (42.926 mm)Tool weight 0.54 lbs. (0.245 kg)Shipping length 7.69 in. (195.326 mm) Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Male (13/16” - 16 UN)

SPECIFICATIONS AS30018Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 5.5 in (139.7 mm)Tool weight 0.56 lbs. (0.254 kg)Shipping length 11.5 in. (292.1 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

AS30005

AS30018

Page 106: AES Catalog

C-37

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

Ref. Part No. Description 1 AS30007 1” GO Firing Sub Assy 2 KIT-30007* Complete Kit Assy 3 1.0029 Firing Sub Contact 4 OOV0110-95 Viton 95 O-Rings: 110 5 1.0129 Insulating Washer 6 OOV0210-95 Viton 95 O-Rings: 210 7 HOO0138 3/8”-16 Hex Nut 8 1.0127 Contact Sub Body 9 LBOO0097 Teflon® Tubing, 3/8 Thin Wall

*KIT-30007 Includes: 1.0029 Firing Sub Contact (2) OOV0110-95 O-Rings: 110 V95 1.0129 Insulating Washer HOO0138 3/8”-16 Hex Nut LBOO0097 Teflon® Tubing, 3/8 Thin WallDoes not include O-Rings

1

2

3

4

5

4

6

9

5

7

8

13/16” -16 UN-2B

7/8” -16 UN-2A1” GO Firing Sub (Button Sub)

ADAPTOR

Page 107: AES Catalog

C-38

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

ADAPTOR

1” GO Firing Sub (Button Sub)

SPECIFICATIONS AS30007Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 2.6875 in. (68.263 mm)Tool weight 0.65 lbs. (0.295 kg)Shipping length 8.6875 in. (220.6625 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Low Pressure Button Male (7/8” - 16 UN)Bottom connection Go TYPE Female (13/16” - 16 UN)

Page 108: AES Catalog

C-39

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

1” GO Double Sealed Tear Drop

Ref. Part No. Description 1 AS30042 1” GO Double Sealed Tear Drop Complete Assy 2 KIT-30042* Complete Kit Assy 3 1.3750030 10-32 Cone Nut 4 LBOO0032 Teflon® Tubing, #4 Thin Wall 5 HOO0252 10-32 x 3.000 Pan Head Screw S.S. 6 3446 Double Sealed Tear Drop Body 7 1.0041 Insulating Washer 8 1.0042 Contact Insulator 9 1.0037 Contact Spring10 OOV0115-95 Viton 95 O-Rings: 11511 LAF00011 Contact Plunger12 HOO0065 Retainer Ring13 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot 14 LAF00128 Insulating Washer

*KIT-30042 Includes: LAF00011 Contact Plunger HOO0065 Retainer Ring 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0252 10-32 x 3.000 Pan Head Screw S.S. LAF00128 Insulating WasherDoes not include O-Rings

1

2

3

7

4

5

10

6

7

8

9

10

11

14

12

13/16” - 16 UN-2A

13/16” - 16 UN-2A

13

ADAPTOR

Page 109: AES Catalog

C-40

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS30042Tool diameter (O.D.) 1 in. (25.4 mm)Tool length 1.437 (36.50 mm)Tool weight 0.58 lb. (0.263 kg)Shipping length 7.437 in. (188.8998 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Double Sealed Tear Drop (13/16” - 16 UN)Bottom connection Go TYPE Male (13/16” - 16 UN)

1” GO Double Sealed Tear Drop

Page 110: AES Catalog

C-41

COMPONENTS

<< Return to Section C Menu << Return to Main Menu

5/8” Sucker Rod Box to 1” GO Box5/8” Sucker Rod Pin to 1” GO Box5/8” Sucker Rod Box to 1” GO Pin5/8” Sucker Rod Pin to 1” GO Pin Ref. Part No. Description 1 AS30019 5/8” Sucker Rod Box to 1” GO Box 2 AS30020 5/8” Sucker Rod Pin to 1” GO Box 3 AS30021 5/8” Sucker Rod Box to 1” GO Pin Assy 4 AS30026 5/8” Sucker Rod Pin to 1” GO Pin Assy 5 KIT-30006* Complete Kit Assembly 6 LAF00011 Contact Plunger 7 HOO0065 Retainer Ring 8 LAF00128 Insulating Washer 9 1.0042 Contact Insulator10 1.0037 Contact Spring11 OOV0115-95 Viton 95 O-Rings: 11512 1.0113 Crossover Sub Body13 1.0209 Crossover Sub Body

*KIT-30006 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring LAF00128 Insulating Washer 1.0042 Contact Insulator HOO0065 Retainer RingDoes not include O-Rings6

5

4

13

7

8

9

11

10

1210

9

11

8

76

5

3

1

2

13/16” - 16 UN-2B

15/16” - 10 UNS-2A

13/16” - 16 UN-2A

15/16” - 10 UNS-2B

13/16” - 16 UN-2A

15/16” - 10 UNS-2A

ADAPTOR

Page 111: AES Catalog

C-42

SPECIFICATIONS

<< Return to Section C Menu << Return to Main Menu

ADAPTOR

5/8” Sucker Rod Box to 1” GO Box5/8” Sucker Rod Pin to 1” GO Box5/8” Sucker Rod Box to 1” GO Pin5/8” Sucker Rod Pin to 1” GO Pin

SPECIFICATIONS AS30019 AS30020 Tool diameter (O.D.) 1.125 in. (28.575 mm) 1.125 in. (28.575 mm)Tool length 4.250 in. (107.95 mm) 2.530 in (64.262 mm)Tool weight 0.630 lb. (0.245 kg) 0.661 lbs. (0.3 kg)Shipping length 10.250 in. (260.35) 8.530 in. (216.662 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN) Go TYPE Female (13/16” - 16 UN)

Bottom connection 5/8” Sucker Rod Female (15/16” - 10 NS) 5/8” Sucker Rod Male (15/16” - 10 NS)

SPECIFICATIONS AS30021 AS30026 Tool diameter (O.D.) 1.125 in. (28.575 mm) 1.125 in. (28.575 mm)Tool length 3.125 in (79.375 mm) 1 in (25.4 mm)Tool weight 0.650 lbs. (0.295 kg) 0.55 lbs. (0.250 kgShipping length 9.125 in. (231.775 mm) 7 in. (177.8 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN) Go TYPE Male (13/16” - 16 UN)

Bottom connection 5/8” Sucker Rod Female (15/16” - 10 NS) 5/8” Sucker Rod Male (15/16” - 10 NS)

AS30019 AS30020

AS30021 AS30026

Page 112: AES Catalog
Page 113: AES Catalog

SECTION D

1 3/8”Table of Contents - 1 3/8”PAGE TOOLCABLE HEADSD-1 1 3/8” Cable Head Assembly (Cone & Washer) D-3 1 3/8” Cable Head Assembly (Clamp Ring) D-5 1 3/8” GO Split Cable Head

SINKER BARSD-7 1 3/8”x5’ Steel Sinker Bar Assembly 1 3/8” X 5’ Tungsten Sinker Bar Assy 1 3/8” x 5’ Lead Sinker Bar Assy 1 3/8” X 7’ Tungsten Sinker Bar Assy 1 3/8” x 7’ Lead Sinker Bar Assy

CASING COLLAR LOCATORSD-9 1 3/8” Casing Collar Locator Assembly (G) D-11 1 3/8” Casing Collar Locator Assembly (NG)

FREE POINT TOOLS & ACCESSORIESD-13 1 3/8” x 16 Stroke Free Point Complete Assembly 1 3/8” x 16 Stroke Free Point Complete w/Magnetic SectionsD-15 Motorized Free Point IndicatorD-17 1 3/8” Slack Joint AssemblyD-19 1 3/8” Upper & Lower Bow Spring Section Assembly (3 spring)D-21 1 3/8” Upper & Lower Bow Spring Section Assembly (4 spring)D-23 1 3/8” Casing Bow Spring Section Assembly (3 spring)D-25 1 3/8” Casing Bow Spring Section Assembly (4 spring)D-27 1 3/8” AES Free Point Upper Magnet Section 1 3/8” AES Free Point Lower Magnet Section 1 3/8” AES Free Point Magnet Tool ExtensionD-29 1 3/8” Free Point Sensor Section Complete AssemblyD-31 1 3/8” Bull Plug Complete AssemblyD-33 1 3/8” Combination Diode AssemblyD-35 1 3/8” Shot Rod Hanger Assembly (3/8” Rod)

DECENTRALIZERS & CENTRALIZERSD-37 1 3/8” Magnetic Decentralizer (Channel) D-39 1 3/8” GO Pin to Double Sealed Tear Drop Magnet Decentralizer (Channel)

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS D-41 1 3/8” GO Tear Drop Sub Complete AssemblyD-43 1 3/8” Double GO Pin Sub Assembly 1 3/8” Double GO Box Sub AssemblyD-45 1 3/8” GO Double Sealed Tear Drop Assembly

D-47 1 3/8” GO Box/Tear Drop w/Pressure Connector and Ground Screw D-49 1 3/8” GO Pin/Tear Drop w/Pressure Connector and Ground Screw

D-51 1” GO Box to 1 3/8” GO Box Assembly 1” GO Pin to 1 3/8” GO Pin AssemblyD-53 1 3/8” Atlas Box to 1 3/8” GO Pin Assembly 1 3/8” Tear Drop to 1 3/8” Atlas Box AssemblyD-55 1 3/8” Atlas Pin to 1 3/8” GO Box Assembly 1 3/8” Atlas Pin to 1 3/8” GO Pin AssemblyD-57 5/8” Sucker Rod Pin to 1 3/8” Atlas Box 5/8” Sucker Rod Box to 1 3/8” Atlas Box 5/8” Sucker Rod Double Box 5/8” Sucker Rod Box to 5/8” Sucker Rod Pin 5/8” Sucker Rod Box to 1 3/8” McCullough Pin 5/8” Double Sucker Rod Pin D-59 1 3/8” Schlumberger Box to 1 3/8” Tear Drop Sub Assembly 1 3/8” Schlumberger Pin to 1 3/8” Tear Drop Sub AssemblyD-61 1 3/8” Schlumberger Box to 1 3/8” GO Pin Assembly 1 3/8” Schlumberger Pin to 1 3/8” GO Pin AssemblyD-63 1 3/8” GO Pin to 1 3/8” McCullough Pin AssemblyD-65 1 3/8” GO Box to 1 3/8” McCullough Box AssemblyD-67 1 3/8” SIE Box to 1 3/8” GO Box AssemblyD-69 5/8” Sucker Rod Box to 1 3/8” GO Box Assembly 5/8” Sucker Rod Pin to 1 3/8” GO Box Assembly 5/8” Sucker Rod Box to 1 3/8” GO Pin Assembly 5/8” Sucker Rod Pin to 1 3/8” GO Pin AssemblyyD-71 1 3/8” Sondex Pin To Go BoxD-73 1 3/8” Go Pin To Sondex Box

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

<< Return to Main Menu

Page 114: AES Catalog

D-1

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

CABLE HEAD

1 3/8” Cable Head Assembly (Cone & Washer)

1

2

3

5

4

1 3/16” - 12 UN-2A

Ref. Part No. Description 1 AS40095** 1 3/8” Cable Head Complete Assy (Cone & Washer) 2 1.3750510** 1 3/8” Fishing Neck (1 3/8” GO) 3 1.4370047** Cable Head Cone 4 1.4370082 Cable Head Washer 5 1.3750508 1 3/8” Cable Head Sleeve 6 AS40001 1 3/8” Tear Drop Sub Assy 7 KIT-40001* Complete Kit Assy 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)10 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot**Specify line size when ordering***Sold Separately

*KIT-40001 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (3) 1.0041 Insulating Washer 1.3750030 TD Cone Nut HOO0095 10-32 x 2” Pan Head Screw, S.S. 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does not include O-Rings

1 3/16”-12 UN-LH (Left Hand)

6

7

8

10

9

Page 115: AES Catalog

D-2

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

CABLE HEAD

SPECIFICATIONS AS40095Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 12.515 in. (317.881 mm)Tool weight 3.438 lbs. (1.559 kg) Shipping length 18.515 in. (470.281 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Male (1 3/16” - 12 UN)Fish kneck size 1 in. - 1 3/8 in.

1 3/8” Cable Head Assembly (Cone & Washer)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

Page 116: AES Catalog

D-3

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

CABLE HEAD

1 3/8” Cable Head Assembly (Clamp Ring)

Ref. Part No. Description 1 AS40003* 1 3/8” Cable Head Complete Assy (Clamp ring) 2 1.4370008 Rope Socket Body for 5/16” Line 1.4370016 Rope Socket Body for 7/32” Line 1.4370016 Rope Socket Body for 3/16” Line 1.4370014 Rope Socket Body for 7/16” Line 3 HOO0111 3/8 - 24 x 5/16” Socket Set Screw 4 1.4370009* Clamp Ring 1.4370012 Clamp Ring for 7/16” 5 1.3750507* 1 3/8” Cable Head Body 6 OOV0211-95 Viton 95 O-Rings: 211 7 AS40001 1 3/8” Tear Drop Assy 8 KIT-40001** Contact Kit Complete Assy 9 EXP015 1 3/8” Rope Socket Tool10 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)11 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot *Specify line size when ordering*** Sold Separately

**KIT-40001 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (3) 1.0041 Insulating Washer 1.3750030 TD Cone Nut HOO0095 10-32 x 2” Pan Head Screw, S.S. 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does not include O-Rings

7

8

10

6

1

4

2

39

5

1 3/16”-12 UN-2A

11

Page 117: AES Catalog

D-4

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

CABLE HEAD

1 3/8” Cable Head Assembly (Clamp Ring)

SPECIFICATIONS AS40003Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 12.330 in. (313.182 mm)Tool weight 3.6 lbs. (1.633 kg) Shipping length 18.330 in. (465.582 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

Page 118: AES Catalog

D-5

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

CABLE HEAD

1 3/8” GO Split Cable Head

Ref. Part No. Description1 AS40046** 1 3/8” GO Split Cable Head Complete Assy2 1.4370082 Cable Head Washer3 1.3750509** GO Split Cable Head Top Sub4 1.3750508 Cable Head Sleeve 5 AS40001 1 3/8” Tear Drop Sub Assy 6 1.4370047** GO Type Cable Head Cone7 00V0211-95 Viton 95 O-Rings: 2118 1.3750164 1 3/8” Fishing Neck9 KIT-40001* Complete Kit Assy10 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot **Specify line size when ordering.*** Sold Separately

Optional:11 AS6003OTL 5’ OTL Tungsten Sinker Bar AS6003OTL 7’ OTL Tungsten Sinker Bar

*KIT-40001 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (3) 1.0041 Insulating Washer 1.3750030 TD Cone Nut HOO0095 10-32 x 2” Pan Head Screw, S.S. 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does Not Include O-Ring

3

6

4

2

8

11

5

1 3/16”-12 UN-2A

1 3/16”-12 UN-2BLeft Handed

1 3/16”-12 UN-2A

1

7

1 3/16”-12 UN-2A

9

10

Page 119: AES Catalog

D-6

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

CABLE HEAD

1 3/8” GO Split Cable Head

SPECIFICATIONS AS40046Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 15.438 in. (392.125 mm)Tool weight 4.313 lb. (1.956 kg)Shipping length 21.438 in. (544.5252 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE (1 3/16” - 12 UN)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

Page 120: AES Catalog

D-7

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

SINKER BAR

2

3

4

5

16

6

15

7

8

5 9

10

11

12

14

1 13

16

1 3/8” Sinker Bars

Ref. Part No. Description 1 AS40004 1 3/8” X 5’ Steel Sinker Bar Assy AS40009 1 3/8” X 5’ Tungsten Sinker Bar Assy AS40098 1 3/8” x 5’ Lead Sinker Bar Assy AS40015 1 3/8” X 7’ Tungsten Sinker Bar Assy AS40099 1 3/8” x 7’ Lead Sinker Bar Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 OOV0211-95 Viton 95 O-Ring: 211 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 Contact Nut 9 LBOO0032 Teflon® Tubing, #4 Thin Wall10 1.3750296 Assy Contact Thru Rod For 5’ BARS (Plunger Contact) 1.3750184 Assy Contact Thru Rod For 7’ BARS (Plunger Contact)11 1.0086 Insulating Bevel Washer12 1.0087A Contact Receptacle13 KIT-40004* All 5’ Bars Listed Above (Plunger Contact) KIT-40015** All 7’ Bars Listed Above (Plunger Contact)14 1.3750067 1 3/8” Thread Protector, Box (Not Shown)15 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)16 KIT-40004LR Complete Kit Assy*

*KIT-40004 Includes: 1.3750296 Assy Contact Thru Rod For 5’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)Does not include O-Rings

**KIT-40015 Includes: 1.3750184 Assy Contact Thru Rod For 7’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)*Does not include O-Rings

KIT-40004LR Includes: LAF00011 Contact Plunger 1.0086 Insulating Bevel Washer 1.3750081 Contact Nut HOO0065 Retainer Ring, #51 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A Contact Receptacle*Does not include O-Rings

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 121: AES Catalog

D-8

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

SINKER BAR

1 3/8” Sinker Bars

SPECIFICATIONS (Tungsten) AS40009 AS40015Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 60 in. (1524 mm) 84 in. (2133.6 mm)Tool weight 38 lbs. (17.24 kg) 54 lbs. (24.49 kg)Shipping length 66 in. (1676.4 mm) 90 in. (2286 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS (Steel) AS40004 (Steel)Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 60 in. (1524 mm)Tool weight 23 lbs. (10.43 kg) Shipping length 66 in. (1676.4 mm)Temperature rating 500°F (260°C) Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS (Lead) AS40098 AS40099

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Steel, lead and tungsten models available

Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 60 in. (1524 mm) 84 in. (2133.6 mm)Tool weight 28 lbs. (12.70 kg) 42 lbs. (19.05 kg)Shipping length 66 in. (1676.4 mm) 90 in. (2286 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

Page 122: AES Catalog

D-9

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

CASING COLLAR LOCATOR

1 3/8” Casing Collar Locator (Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS40091 1 3/8” Casing Collar Locator Complete Assy (G) 2 1.4370057 Contact Rod 10-32 x 8.750 3 SEM0069 Double Diode 4 1.3750041 CCL Upper Contact 5 HOO0027 6–32 x 1/4” Pan Hd. Screw, Alloy 6 1.4370031 Magnet Retainer 7 PSA043UN Grounded Coil (Universal)8 1.4370028 Retainer Insulator9 HOO0058 10-32 Hex Nut, S.S.10 1.3750073-1 CCL Magnet11 HOO0004 4–40 x 3/16” Pan Hd. Screw, Alloy12 HOO0126 Ground Spring13 LBOO0032 Teflon® Tubing, #4 Thin Wall14 1.4370029 Lower CCL Insulator15 1.4370026 Lower CCL Contact16 HOO0250 Retainer Ring, #10617 1.3750481 1 3/8” CCL Housing18 AS50008-1 CCL Coil & Magnet Assy (G)19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)

KIT-50008 Includes: 1.3750041 CCL Upper Contact 1.4370028 Retainer Insulator 1.4370029 Lower CCL Insulator 1.4370057 Contact Rod 10-32 x 8.750 HOO0027 6–32 x 1/4” Pan Hd. Screw, Alloy SEM0069 Double Diode 1.4370026 Lower CCL Contact HOO0126 Ground Spring HOO0004 4–40 x 3/16” Pan Hd. Screw, Alloy LBOO0032 Teflon® Tubing, #4 Thin Wall*Does not include O-Rings

1

16

4

98

3

5

19

6

10

17

13

18

7

11

12

2

10

14

1516

19 1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

Page 123: AES Catalog

D-10

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS40091Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 14.147 in. (359.3mm)Tool weight 4.4 lbs (2.0kg)Shipping length 17.147 in. (435.5 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance 2.4k - 2.7k OhmsTop connection GO Type Female (1 3/16”-12 UN)Bottom connection GO Type Female (1 3/16”-12 UN)Sensor measure point 6.421 in. (163 mm) from bottom of tool

The 1 3/8” Casing Collar Locator (Grounded) detects casing collars and perforations in tubing or casing.

DESCRIPTIONThe casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES• Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

1 3/8” Casing Collar Locator (Grounded)

Page 124: AES Catalog

D-11

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

CASING COLLAR LOCATOR

1 3/8” Casing Collar Locator (Non-Grounded)

1

5

10

2

11

6

12

13

14

17

7

98

3

14

17

5

16

10

1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

4

15

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded1 AS40092 1 3/8” Casing Collar Locator Complete Assy (NG)2 1.4370057 Contact Rod 10-32 x 8.7503 SEM0069 Double Diode4 1.3750041 CCL Upper Contact5 HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S.6 1.4370031 Magnet Retainer7 PSA043UN Grounded Coil (Universal)8 1.4370028 Retainer Insulator9 HOO0058 10-32 Hex Nut, S.S.10 1.3750073-1 CCL Magnet11 LB000032 Teflon® Tubing, #4 Thin Wall12 1.4370029 Lower CCL Insulator13 1.3750041-1 1-7/16 Lower Contact14 HOO0250 Retainer Ring, #10615 1.3750481 1 3/8” CCL Housing16 AS50006-1 CCL Coil & Magnet Assy (NG)17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)

KIT-50006 Includes: (2) HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S. 1.4370028 Retainer Insulator 1.3750041 CCL Upper Contact 1.3750041-1 1-7/16 Lower Contact 1.4370029 Lower CCL Insulator 1.4370057 Contact Rod 10-32 x 8.750 SEM0069 Double Diode LBOO0032 Teflon® Tubing, #4 Thin Wall 1.4370028 Retainer InsulatorDoes not include O-Rings

Page 125: AES Catalog

D-12

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS40092

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with free point back off

Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 14.147 in. (359.3 mm)Tool weight 4.4 lbs. (2.0 kg)Shipping length 17.147 in. (435.5 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance 2.4K - 2.7K OhmsTop connection GO Type Female (1 3/16”-12 UN) Bottom connection GO Type Female (1 3/16”-12 UN)Sensor measure point 6.421 in. (163 mm) from bottom of tool

The 1 3/8” Free Point Casing Collar Locator (Non-Grounded) detectscasing collars and perforations in tubing or casing.

1 3/8” Casing Collar Locator (Non-Grounded)

Page 126: AES Catalog

D-13

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Free Point Assembly

1 3/8” Free Point Magnet Tool Assembly2

3

29

3

11

10

1 1

7

5

6

8

4

1213

Ref. Part No. Description 12 AS400FP-16 1 3/8” Free Point Tool with 16” Stroke 1 AS40016 1 3/8” AES Slack Joint Section Complete Assy (16” Stroke) 2 AS40017 1 3/8” AES Upper & Lower Bow Spring 3 sided Complete Assy (3 spring)

3 AS40018 1 3/8” AES Sensor Section Complete Assy 4 AS40020 1 3/8” Grounded Bull Plug 5 AS40035 1 3/8” Combination Diode Sub 6 AS40002 1 3/8” Shot Rod Hanger 7 1.3750131 Shot Rod 3/8” x 5ft 8 1.3750117 1 3/8” Bull Plug Shot Rod14 AS40096 1 3/8” Shot Rod Assembly

OPTIONS: AS40018PC Sensor Section - Piston Compensation AS40017-4 Bow Springs: 4 sided AS40088 Bow Springs: 3 sided casing (3 spring) AS40088-4 Bow Springs: 4 sided casing (4 spring) AS40016-24 Slack Joint: 24” stroke AS40016-36 Slack Joint: 36” stroke

Ref. Part No. Description 13 AS400FPM 1 3/8” Free Point Tool with Mangets 1 AS40016 1 3/8” AES Slack Joint Section Complete Assy (16” Stroke) 3 AS40018 1 3/8” AES Sensor Section Complete Assy 5 AS40035 1 3/8” Combination Diode Sub 6 AS40002 1 3/8” Shot Rod Hanger 7 1.3750131 Shot Rod 3/8” x 5ft 8 1.3750117 1 3/8” Bull Plug Shot Rod 9 AS40085 1 3/8” Upper Magnet Section Assy10 AS40086 1 3/8” Lower Magnet Section Assy11 AS40087 1 3/8” Magnet Extension Assy14 AS40096 1 3/8” Shot Rod Assembly

OPTIONS: AS40018PC Sensor Section - Piston Compensation AS40016-24 Slack Joint: 24” stroke AS40016-36 Slack Joint: 36” stroke

147

6

14

8

Page 127: AES Catalog

D-14

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Free Point Assembly1 3/8” Free Point Magnet Tool Assembly

SPECIFICATIONS AS400FPM

SPECIFICATIONS AS400FP-16

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a sensor section to determine stuck point. Additional components that must be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length (closed/open) 118.5 - 133.5 in. (3009.9 - 3390.9 mm)Tool weight 45 lbs (19.32 kg)Shipping length (closed) 124.5 in. (3162.3 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1 3/16”-12 UN) Bottom connection GO Type Female (1 3/16”-12 UN)

Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length (closed/open) 108.85 - 123.85 in. (2764.79 - 3145.79 mm)Tool weight 41 lbs (18.365 kg)Shipping length (closed) 114.85 in. (2917.19 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1 3/16”-12 UN)

Page 128: AES Catalog

D-15

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

Motorized Free Point Indicator (FPI) Assembly

Ref. Part No. Description 1 FPI007 Motorized Free Point Tool Assy (1 tool, no panel)2 AS40092 Casing Collar Locator Assy (Non Grounded)3 413500 Upper motorized anchor 4 AS40018 Sensor section5 413501 Lower motorized anchor

5

4

3

2

1

FREE POINT

Page 129: AES Catalog

D-16

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS FPI007

DESCRIPTION The Motorized Free Point indicator is an electromechanical assembly designed to measure torque or stretch in harsh conditions. The basic Motorized Free Point Indicator assembly consists of a non-grounded collar locator (AS40092), upper motorized anchor (FUA), sensor section (AS40018), and lower motorized anchor (FLA) to determine stuck point. A classic Free Point tool assembly typically consists of sinker bars to overcome the holding ability of the pre-set anchors and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement. By replacing the bow spring or magnetic anchor withmotorized anchors, the Motorized Free Point Indicator in many cases elimi-nates the need for sinker bars and a slack joint.

FEATURES • Less friction/drag, easier to maneuver into high angle and horizontal wells• Controllable anchoring force downhole instead of setting constant force before the run, as with springs. • Faster setup time, shorter tool string• Simple maintenance, can be redressed at wellsite• Crossovers to various service company connections available• Does not require extra force to pass restrictions• In many cases, eliminates the need for a slack joint or sinker bars• Four arm system provides optimal deployment in horizontal wells• Shear pins allow for retrieval if communication to deployed tools is lost

Tool diameter (O.D.) 1.375 in. (34.92 mm)Tool length 9.27 ft. (2.83 m)Tool weight 35 lbs. (16 kg)Shipping length in. ( mm)Temperature rating ** 350°F (177°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Box (Female)

The Motorized Free Point Indicator measures torque and stretch to locate where drill pipe, tubing or casing is stuck, or partially stuck without the need for additional equipment of a classic Free Point tool.

Motorized Free Point Indicator (FPI) Assembly

** Sensor Section and Collar Locator rated to 500°F (260°C)

Page 130: AES Catalog

D-17

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Slack Joint

Ref. Part No. Description 1 AS40016* 1 3/8” Slack Joint Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750001 1 3/8” Slack Joint Top Sub 9 LBOO0032 Teflon® Tubing, #4 Thin Wall 10 HOO0094 6-32 x 3/16” Pan Head Screw S.S. 11 HOO0095 10-32 x 2” Pan Head Screw S.S. 12 1.3750139 1 3/8” Slack Joint Cone Nut 13 HOO0141 6-32 X 1/8 Socket Set Screw, Alloy 14 WIR1040-1.375-1 Slack Joint Spring, 16” Stroke 15 1.3750002-16 1 3/8” Slack Joint Housing 16 1.3750005 1 3/8” Slack Joint Inner Mandrel End Connection 17 OOV0111-95 Viton 95 O-Rings: 111 18 HOO0430 1/4”-20 x 3/16” Socket Set Screw, S.S. 19 1.3750447-16 Contact Rod 10-32 X 25.500 20 HOO0098 1/8” x 1” Roll Pin 21 HOO0170 6-32 x 1/4” Button Head Cap Screw, Alloy 22 1.3750004-16 1 3/8” Slack Joint Inner Mandrel 23 HOO0091 1/4”-20 x 3/16” Socket Set Screw, Alloy 24 1.3750006 1 3/8” Slack Joint Inner Mandrel Connection Sub 25 1.3750029 Female Contact Insulator 26 1.3750173 10-32 Spacer Contact 27 1.3750185 Slack Joint Key28 1.3750067 1 3/8” Thread Protector, Box (Not Shown)29 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

**Slack Joint also available in 24” and 36” Stroke* Specify stroke length when ordering

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

1

26

25

17

2324

22

21

27

9

19 18

17

10

4

1213

15

12 13

104

11

8

43

947

6

5 292

20

14

16

28

FREE POINT

Page 131: AES Catalog

D-18

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Slack Joint

SPECIFICATIONS AS40016Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 39.15 in. (994.41 mm)Tool weight 10.97 lbs (4.976 kg)Shipping length 45.15 in. (1146.81 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16”” - 12 UN)

DESCRIPTION The slack joint section of the Free Point Indicator tool relieves weight above the tool assembly when the tool is at the correct depth for making a measurement.

FEATURES • Wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restrictions.

Page 132: AES Catalog

D-19

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1

25

9

24

23

5

2221

11

20

19

18

17

16

13

13

12

11

10

528

4

4

87

632

17

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

26

14

15

27

1 3/8” Upper & Lower Bow Spring (3 spring)Ref. Description 1 AS40017 1 3/8” Upper & Lower Bow Spring Section Assy (3 spring) 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact Nut 9 OOV0111-95 Viton 95 O-Rings: 111 10 1.3750007 1 3/8” Upper Mandrel Connection Sub 11 HOO0091 1/4”-20 x 3/16” Socket Set Screw, Alloy12 1.3750009 1 3/8” Freepoint Adjustment Nut13 1.3750059 Washer14 1.3750055 1 3/8” Freepoint Compression Spring (3 spring)15 1.3750077 1 3/8” Freepoint Bow Spring Mandrel16 1.3750010 1 3/8” Freepoint Bow Spring Collar (3 spring)17 HOO0048 10-32 x 3/16” Buttonhead Cap Screw, Alloy18 OMF0004 3/4” x 21” Bow Spring-Slick OMF0004-1 3/4” x 21” Bow Spring-Carbide19 1.3750011 1 3/8” Freepoint Adjustment Sleeve20 1.3750034 1 3/8” Freepoint Adjustment Collar (3 spring) 1.3750475 1 3/8” Freepoint Adjustment Collar (4 spring) 21 LBOO0032 Teflon® Tubing, #4 Thin Wall22 1.3750441 Contact Rod 10-32 x 26.00 23 1.3750012 1 3/8” Freepoint Bow Spring Anchor (3 spring)24 1.3750029 Contact Insulator 25 1.3750173 10-32 Spacer Contact26 102219 KIT-40017* Complete Kit Assy 27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

*KIT-40017 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750029 Contact Insulator 1.3750173 10-32 Spacer Contact 1.3750441 Contact Rod 10-32 x 26.00 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does not include O-Rings

FREE POINT

Page 133: AES Catalog

D-20

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

SPECIFICATIONS AS40017Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 28 in. (711.2 mm)Tool weight 9 lbs (4.086 kg)Shipping length 34 in. (863.6 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

FREE POINT

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restrictions.

1 3/8” Upper & Lower Bow Spring (3 spring)

Page 134: AES Catalog

D-21

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1

25

9

24

23

5

2221

11

20

19

18

17

16

13

13

12

11

10

528

4

4

87

632

17

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

26

14

15

27

1 3/8” Upper & Lower Bow Spring (4 spring)Ref. Description 1 AS40017-4 1 3/8” Upper or Lower Casing Bow Spring Assy (4 spring) 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact Nut 9 OOV0111-95 Viton 95 O-Rings: 111 10 1.3750007 1 3/8” Upper Mandrel Connection Sub 11 HOO0091 1/4”-20 x 3/16” Socket Set Screw, Alloy12 1.3750009 1 3/8” Freepoint Adjustment Nut13 1.3750059 Washer 14 1.3750055-4 1 3/8” Freepoint Compression Spring (4 spring)15 1.3750077 1 3/8” Freepoint Bow Spring Mandrel16 1.3750474 1 3/8” Freepoint Bow Spring Collar (4 spring) 17 HOO0048 10-32 x 3/16” Buttonhead Cap Screw, Alloy18 OMF0004 3/4” x 21” Bow Spring-Slick OMF0004-1 3/4” x 21” Bow Spring-Carbide19 1.3750011 1 3/8” Freepoint Adjustment Sleeve20 1.3750034 1 3/8” Freepoint Adjustment Collar (3 spring) 1.3750475 1 3/8” Freepoint Adjustment Collar (4 spring) 21 LBOO0032 Teflon® Tubing, #4 Thin Wall22 1.3750441 Contact Rod 10-32 x 26.00 23 1.3750473 1 3/8” Freepoint Bow Spring Anchor (4 spring) 24 1.3750029 Contact Insulator 25 1.3750173 10-32 Spacer Contact26 102219 KIT-40017* Complete Kit Assy 27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

*KIT-40017 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750029 Contact Insulator 1.3750173 10-32 Spacer Contact 1.3750441 Contact Rod 10-32 x 26.00 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does not include O-Rings

FREE POINT

Page 135: AES Catalog

D-22

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Upper & Lower Bow Spring (4 spring)

SPECIFICATIONS AS40017-4Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 28 in. (711.2 mm)Tool weight 9 lbs (4.086 kg)Shipping length 34 in. (863.6 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

FREE POINT

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restrictions.

Page 136: AES Catalog

D-23

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Casing Bow Spring Section (3 Spring)

Ref. Part No. Description 1 AS40088 1 3/8” Casing Bow Spring Section Assy (3 Spring) 2 1.0033 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact Nut 9 OOV0111-95 Viton 95 O-Rings: 111 10 1.3750007 1 3/8” Upper Mandrel Connection Sub 11 HOO0091 1/4”-20 x 3/16” Socket Set Screw, Alloy 12 1.3750009 1 3/8” Freepoint Adjustment Nut 13 1.3750059 Washer 14 1.3750055 1 3/8” Freepoint Compression Spring 15 1.3750077 1 3/8” Freepoint Casing Bow Spring Mandrel 16 1.3750010 1 3/8” Freepoint Bow Spring Collar 17 HOO0048 10-32 x 3/16” Buttonhead Cap Screw, Alloy 18 OMF0004 3/4” x 21” Bow Spring-Slick OMF0004-1 3/4” x 21” Bow Spring-Carbide 19 1.3750011 1 3/8” Freepoint Adjustment Sleeve 20 1.3750034 1 3/8” Freepoint Adjustment Collar 21 LBOO0032 Teflon® Tubing, #4 Thin Wall 22 1.3750468 Contact Rod 187 x 26.000” 23 1.3750012 1 3/8” Freepoint Bow Spring Anchor 24 1.3750029 Contact Insulator 25 1.3750173 10-32 Spacer Contact 26 KIT-40088* Complete Kit Assy 27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

*KIT-40088 Includes: 1.0033 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750029 Contact Insulator 1.3750173 10-32 Spacer Contact 1.3750441 Contact Rod 10-32 x 26.00 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does not include O-Rings

1

25

27

9

24

23

5

2221

11

20

19

18

17

16

13

13

12

11

10

528

4

4

87

632

17

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

26

15

FREE POINT

14

Page 137: AES Catalog

D-24

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Casing Bow Spring Section (3 Spring)

SPECIFICATIONS AS40088 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 41.173 in. (1045.79 mm)Tool weight 11.7 lb. (5.3 kg)Shipping length 47.173 in. (1198.1942 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

Page 138: AES Catalog

D-25

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Casing Bow Spring Section (4 Spring)

Ref. Part No. Description 1 AS40088-4 1 3/8” Casing Bow Spring Section Assy (4 Spring) 2 1.0033 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact Nut 9 OOV0111-95 Viton 95 O-Rings: 111 10 1.3750007 1 3/8” Upper Mandrel Connection Sub 11 HOO0091 1/4”-20 x 3/16” Socket Set Screw, Alloy 12 1.3750009 1 3/8” Freepoint Adjustment Nut 13 1.3750059 Washer 14 1.3750055-4 1 3/8” Freepoint Compression Spring 15 1.3750077 1 3/8” Freepoint Casing Bow Spring Mandrel 16 1.3750474 1 3/8” Freepoint Bow Spring Collar 17 HOO0048 10-32 x 3/16” Buttonhead Cap Screw, Alloy 18 OMF0004 3/4” x 21” Bow Spring-Slick OMF0004-1 3/4” x 21” Bow Spring-Carbide 19 1.3750011 1 3/8” Freepoint Adjustment Sleeve 20 1.3750475 1 3/8” Freepoint Adjustment Collar 21 LBOO0032 Teflon® Tubing, #4 Thin Wall 22 1.3750468 Contact Rod 187 x 26.000” 23 1.3750473 1 3/8” Freepoint Bow Spring Anchor 24 1.3750029 Contact Insulator 25 1.3750173 10-32 Spacer Contact 26 KIT-40088* Complete Kit Assy 27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

*KIT-40088 Includes: 1.0033 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750029 Contact Insulator 1.3750173 10-32 Spacer Contact 1.3750468 Contact Rod 187 x 26.000” LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51Does not include O-Rings

1

25

27

9

24

23

5

2221

11

20

19

18

17

16

13

13

12

11

10

528

4

4

87

632

17

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

26

15

14

Page 139: AES Catalog

D-26

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Casing Bow Spring Section (4 Spring)

SPECIFICATIONS AS40088-4

Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 41.173 in. (1045.79 mm)Tool weight 11.7 lb. (5.3 kg)Shipping length 47.173 in. (1198.1942 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

Page 140: AES Catalog

D-27

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Magnet Tools

Ref. Part No. Description 1 AS40085 1 3/8” AES Free Point Upper Magnet Section 2 AS40086 1 3/8” AES Free Point Lower Magnet Section 3 AS40087 1 3/8” AES Free Point Magnet Tool Extension 4 KIT-40085* Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 1.0041 Insulating Washer 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.0042 Contact Insulator10 1.0037 Contact Spring11 1.3750081 10-32 Contact Receptacle12 1.3750479 Contact Rod 10-32 x 11.68713 LBOO0032 Teflon® Tubing, #4 Thin Wall14 1.0086 Beveled Insulating Washer15 1.0087A 10-32 Contact Receptacle16 1.3750385 Magnet Extension Tool Body17 HOO0279 Magnets18 HOO0317 Carbide Pads19 1.370067 1 3/8” Thread Protector, Box (Not Shown)20 1.370068 1 3/8” Thread Protector, Pin (Not Shown)21 KIT-40087* Complete Kit Assy

*KIT-40087 Includes: LAF00011 Contact Plunger (2) 1.0041 Insulating Washer HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0042 Contact InsulatorDoes not include O-Rings

*KIT-40085 Includes: LAF00011 Contact Plunger (2) 1.0041 Insulating Washer HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0042 Contact Insulator 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle 1.3750081 10-32 Contact Receptacle 1.3750479 Contact Rod 10-32 x 11.687 LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1 3/16”-12 UN-2A

1

6

3

5

8

7

85 9

10 20

20

20

1118

17

18

17

181415

4

12

13

1 3/16”-12 UN-2B

17

18

19

19

18

18

17

2

678

9107

16

1 3/16”-12 UN-2B

FREE POINT

21

Page 141: AES Catalog

D-28

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Magnet Tools

SPECIFICATIONS AS40085Tool diameter (O.D.) 1.437 in. (36.5 mm)Tool length 14.1 in. (358.14 mm)Tool weight 5.5 lbs (2.497 kg)Shipping length 20.1 in. (510.54 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16”” - 12 UN)

SPECIFICATIONS AS40086Tool diameter (O.D.) 1.437 in. (36.5 mm)Tool length 15.1 in. (383.54 mm)Tool weight 6 lbs (2.724 kg)Shipping length 21.1 in. (535.94 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS40087Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 14.125 in. (358.78 mm)Tool weight 3.9 lbs (1.734 kg)Shipping length 20.125 in. (511.175 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16”” - 12 UN)

DESCRIPTION The magnet section of the Free Point Indicator tool decentralizes the tool against the side wall of large casings allowing for accurate measurement of stact pipe.

FEATURES • Decentralizes Free Pont Indicator tool

AS40087

AS40085

AS40086

Page 142: AES Catalog

D-29

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Free Point Sensor Section (Boot Type)

Ref. Part No. Description 1 AS40018 1 3/8” Free Point Sensor Section Complete Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring 4 OOV0211-95 Viton 95 O-Rings: 211 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 PSA032 Pressure Connection Assy 9 1.3750013 1 3/8” Sensor Connection Sub 10 OOV0119-95 Viton 95 O-Rings: 119 11 PSA084 Pressure Connector 12 PSA052 Sensor Coil Assy 13 1.3750018 Sensor Coil Jam Nut 14 OOV0120-95 Viton 95 O-Rings: 120 15 3.0013 Measuring Sensor 16 1.0038 Sensor Spring 17 1.3750161 Thrust Washer 18 HOO0073 Bearings 19 1.3750015 1 3/8” Sensor Mandrel 20 1.3750159 Sensor Housing Lower Sub 21 OOV0021-95 Viton 95 O-Rings: 021 22 1.3750019 Boot Sub 23 PSA060 Sensor Contact Rod Assy 24 1.3750020 Boot Protector 25 BOO0052 1 3/8” Sensor Boot 26 1.3750022 Boot End Cap 27 1.3750023 Boot End Cap Cover 28 OOV0016 Viton 75 O-Rings: 016 29 HOO0109 1/4” -20 x 5/16” Socket Set Screw, Alloy 30 OOV0110-95 Viton 95 O-Rings: 110 31 1.3750024 1 3/8” Sensor Mandrel Connection Sub 32 1.3750021-1 Jam Nut 33 1.3750031 Pressure Connector Insulator 34 1.3750158BC Sensor Housing Upper Sub 35 HOO0298 6-32 x 5/8” Socket Head Cap Screw, Alloy 36 HOO0148 10-32 x 1/2” Socket Head Cap Screw, Alloy37 1.3750067 1 3/8” Thread Protector, Box (Not Shown)38 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)39 3.0030 Insulator

13/16”-12 UN-2A

13/16”-12 UN-2B

23

18

12

10

9 8

532

576

384

18

1

11

2221

2019

17

16

1434

39

13

35

15

30

29

282726

25

24

33

37

3236

31

FREE POINT

Page 143: AES Catalog

D-30

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Free Point Sensor Section (Boot Type)

SPECIFICATIONS AS40018Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 26.375 in. (669.925 mm)Tool weight 9.19 lbs. (4.168 kg)Shipping length 32.375 in. (822.325 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16”” - 12 UN)

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a snsor section to determine stuck point. Additional components that must be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to deter-mine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

Page 144: AES Catalog

D-31

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Grounded Bull Plug

Ref. Part No. Description 1 AS40020 1 3/8” Bull Plug Complete Assy 2 KIT-40020* Complete Kit Assy 3 1.0033 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750061 Contact Sub Body

*KIT-40020 Includes: 1.0033 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator HOO0065 Retainer Ring, #51Does not include O-Rings

3

45

7

8

9

2

1

6

1 3/16”-12 UN-2A

FREE POINT

Page 145: AES Catalog

D-32

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Grounded Bull Plug

SPECIFICATIONS AS40020Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.455 in. (36.957 mm)Tool weight 0.771 lbs (0.350 kg)Shipping length 7.455 in. (189.357 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)

Page 146: AES Catalog

D-33

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Combination Diode Sub

Ref. Part No. Description 1 AS40035 1 3/8” Combination Diode Complete Assy 2 KIT-40035* Complete Kit Assy 3 1.0033 Contact Plunger 4 HOO0181 Retainer Ring, 9/16 Internal 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0235 Contact Insulator 8 1.0037 Contact Spring 9 1.3750026 Contact Sub Body10 PSA029-47 47 OHM Diode Cartridge Assy11 LBOO0032 Teflon® Tubing, #4 Thin Wall12 HOO0095 10-32 x 2.000 Pan Head Screw S.S.13 1.3750030 10-32 Cone Receptacle14 1.0234 Insulating Washer15 0.5000005HT High Temp Insulating Washer

*KIT-40035 Includes: 1.0033 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer 1.0234 Insulating Washer 1.0235 Contact Insulator 1.3750030 10-32 Cone Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0095 10-32 x 2.000 Pan Head Screw S.S. PSA029-47 47 OHM Diode Cartridge Assy 0.5000005HT High Temp Insulating Washer HOO0181 Retainer Ring, 9/16 InternalDoes not include O-Rings

UP

1

2

3

4

14

7

8

9

10

5

11

12

15

13

6

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

FREE POINT

Page 147: AES Catalog

D-34

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Combination Diode Sub

SPECIFICATIONS AS40035Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 2.5 in. (63.5 mm)Tool weight 1.48 lbs (0.672 kg)Shipping length 8.5 in. (215.9 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Tear Drop Male (1 3/16” - 12 UN)

UP

Page 148: AES Catalog

D-35

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Shot Rod Hanger Assembly

1

2

3

4

Ref. Part No. Description 1 AS40096 1 3/8” Shot Rod Hanger Assy (3/8” Rod)2 AS40002 1 7/16” Shot Rod Hanger Sub (1 3/16”-12 UN Threads)3 1.3750131 3/8” Shot Rod (3/8”-16 UNC Threads)4 1.3750117 1 3/8” Shot Rod Bull Plug

FREE POINT

Page 149: AES Catalog

D-36

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

FREE POINT

1 3/8” Shot Rod Hanger Assembly

SPECIFICATIONS AS40002Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 7.275 in. (184.785 mm)Tool weight 0.99 lbs (0.449 kg)Shipping length 13.275 in. (337.185 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS 1.3750131Tool diameter (O.D.) 0.375 in. (9.525 mm)Tool length 59.5 in. (1511.3 mm)Tool weight 1.841 lbs (0.835 kg)Shipping length 65.5 in. (1663.7 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Male (3/8” - 16 UNC) Bottom connection Male (3/8” - 16 UNC)

SPECIFICATIONS 1.3750117Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 2.5 in. (63.5 mm)Tool weight 0.719 lbs (0.326 kg)Shipping length 8.5 in. (215.9 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Female (3/8” - 16 UNC)

DESCRIPTION The shot rod hanger mounts the explosive string shot assemblies to be run simultaneously with the Free Point Indicator.

Page 150: AES Catalog

D-37

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

DECENTRALIZERS

1 3/8” Magnetic Decentralizer Channel Type Magnet

1 AS40073 1 3/8” Magnetic Decentralizer Complete Assy 2 KIT-60030* Contact Kit Assy 3 OOV0211-95 Viton 95 O-Rings: 211 4 1.3750333 Adjustment Ring 5 1.3750273 Magnet Clamp 6 HOO0117 10-22 x 1/2” Button Head Socket Set Screw, Alloy 7 1.3750459 Contact Rod 10-32 x 9.312 8 HOO0277 Magnet 9 1.3750471 Channel Magnet Clamp Rod10 1.3750274 1 3/8” Decentralizer Body11 1.0086 Beveled Insulator12 1.0033 Contact Plunger13 1.0041 Insulating Washer14 HOO0065 Retainer Ring, #5115 1.0037 Contact Spring16 1.0042 Contact Insulator17 1.3750081 10-32 Contact18 1.0087A 10-32 Contact Receptacle19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)20 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)21 LBOO0032 Teflon® Tubing, #4 Thin Wall

*KIT-60030 Includes: 1.0033 Contact Plunger (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750459 Contact Rod 10-32 x 9.312 HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0087A 10-32 Contact Receptacle 1.3750081 10-32 Contact LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

Ref. Part No. Description

1

2

3

20

4

7

5

6

10

9

8

5

6

11

1214

13

15

16

13

17

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

19

Page 151: AES Catalog

D-38

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

DECENTRALIZERS

1 3/8” Magnetic Decentralizer Channel Type Magnet

SPECIFICATIONS AS40073Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 10.875 in. (276.225 mm)Tool weight 4.5 lbs (2.04 kg)Shipping length 16.875 in. (428.625 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 152: AES Catalog

D-39

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” GO Pin to Double Sealed Tear DropDecentralizer - Channel Type Magnet Ref. Part No. Description 1 AS40101 1 3/8” GO Pin to Double Sealed Tear Drop Decentralizer 2 KIT-40101* Contact Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0037 Contact Spring 8 1.0042 Contact Insulator 9 1.3750081 10-32 Contact Receptacle10 1.3750333 Adjustment Ring11 1.3750273 Magnet Clamp12 HOO0261 10-32 x 3/8” Button Head Socket Set Screw, Alloy13 HOO0277 Magnet14 CR10X12187 Contact Rod 10-32 x 12.18715 LBOO0032 Teflon® Tubing, #4 Thin Sleeve16 1.3750513 1 3/8” Decentralizer Body17 1.3750471 Channel Magnet Clamp Rod18 1.3750030 10-32 Cone Receptacle19 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)20 LAF00128 Insulating Washer

*KIT-40101 Includes: LAF00011 Contact Plunger HOO0065 Retainer Ring, #51 (2) 1.0041 Insulating Washer 1.0037 Contact Rod 1.0042 Contact Insulator 1.3750081 10-32 Contact Receptacle 1.3750030 10-32 Cone Receptacle LBOO0032 Teflon® Tubing, #4 Thin Sleeve CR10X12187 Contact Rod 10-32 x 12.187 LAF00128 Insulating WasherDoes not include O-Rings

1

2

6

19

3

6

4

20

7

8

5

11

12

17

12

11

10

15

14

5

18

13

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

DECENTRALIZERS

Page 153: AES Catalog

D-40

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

DECENTRALIZERS

1 3/8” GO Pin to Double Sealed Tear DropDecentralizer - Channel Type Magnet

SPECIFICATIONS AS40101Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 10.375 in. (263.525 mm)Tool weight Available upon requestShipping length 16.375 in. (415.925 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Double Sealed Tear Drop Male (1 3/16” - 12 UN)

Page 154: AES Catalog

D-41

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Tear Drop Sub

Ref. Part No. Description 1 AS40001 1 3/8” GO Tear Drop Sub Complete Assy 2 KIT-50014* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.4370051 Tear Drop Sub Body (Turned Down To 1.375”)10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 HOO0095 10-32 x 2” Pan Head Screw, S.S.12 1.3750030 10-32 Cone Nut13 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot14 LAF00128 Insulating Washer***Sold Separately

*KIT-50014 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (3) 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut HOO0095 10-32 x 2” Pan Head Screw, S.S. 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

1

2

9

5

4

12

5

10

11

5

8

6

3

7

1 3/16”-12 UN-2A

13

Page 155: AES Catalog

D-42

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Tear Drop Sub

SPECIFICATIONS AS40001Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 1 in. (25.4 mm)Tool weight 0.910 lb. (0.413 kg)Shipping length 7 in. (177.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN) Bottom connection Go TYPE Male (1 3/16” - 12 UN)

Page 156: AES Catalog

D-43

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Double GO Pin Sub 1 3/8” Double GO Box SubRef. Part No. Description 1 AS40005 1 3/8” Double GO Pin Sub Complete Assy 2 AS40022 1 3/8” Double GO Box Sub Complete Assy 3 KIT-40005* Complete Kit Assy 4 KIT-40022** Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 LAF00128 Insulating Washer 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.0028 Contact Insulator10 1.0037-1 Contact Spring11 1.3750079 Contact Sub Body12 1.0087A 10-32 Contact Receptacle13 1.0086 Beveled Insulating Washer14 LBOO0032 Teflon® Tubing, #4 Thin Wall15 1.3750433 Contact Rod16 1.3750541 Contact Sub Body

*KIT-40005 Includes: 1.0028 Contact Insulator (2) HOO0065 Retainer Ring, #51 (2) LAF00011 Contact Plunger 1.0037-1 Contact Spring (2) LAF00128 Insulating WasherDoes not include O-Rings

**KIT-40022 Includes: (2) 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall (2) 1.0087A 10-32 Contact Receptacle 1.3750433 Contact RodDoes not include O-Rings

1

3

5

7

6

8

9

10

11

8

7

6

5

2

4

12

13

14

15

13

12

16

1 3/16”-12 UN-2B

1 3/16”-12 UN-2AADAPTOR

Page 157: AES Catalog

D-44

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Double GO Pin Sub 1 3/8” Double GO Box Sub

SPECIFICATIONS AS40022Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 5.25 in. (133.35 mm)Tool weight 1.28 lb. (0.581 kg)Shipping length 11.25 in. (285.75 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS40005Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.440 in. (36.576 mm)Tool weight 1.1 lb. (0.499 kg)Shipping length 7.440 in. (188.976 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Male (1 3/16” - 12 UN)

AS40005

AS40022

Page 158: AES Catalog

D-45

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” GO Double Sealed Tear Drop

Ref. Part No. Description 1 AS40027 1 3/8” GO Double Sealed Tear Drop Complete Assy 2 KIT-40027* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750170 1 3/8” Contact Sub Body 10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 HOO0252 10-32 x 3.000 Pan Head Screw, S.S.12 1.3750030 10-32 Cone Receptacle13 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot 14 LAF00128 Insulating Washer***Sold Separately

*KIT-40027 Includes: LAF00011 Contact Plunger (2) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0252 10-32 x 3.000 Pan Head Screw, S.S. 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Receptacle HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

1

2

34

14

9

6

7

8

5

10

11

5

12

6

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

13

ADAPTOR

Page 159: AES Catalog

D-46

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Double Sealed Tear Drop

SPECIFICATIONS AS40027 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.250 in. (31.75 mm)Tool weight 1.140 lb. (0.517 kg)Shipping length 7.250 in. (184.15 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Double Sealed Tear Drop Male (1 3/16” - 12 UN)

Page 160: AES Catalog

D-47

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” GO Box/Tear Drop With Pressure Connector & Ground Screw Ref. Part No. Description 1 AS40103 1 3/8” GO Box / Tear Drop w/Pressure Connector & Ground Screw 2 KIT-40103* Complete Kit Assy 3 CON0012A Pressure Connector 4 3005 Contact Insulator 5 3006 Brass Contact 6 3007 Insulator 7 3029-1 Retainer Ring 8 HOO0094 6-32 x 3/16” Pan Head Screw S.S. 9 OOV0008-95 Viton 95 O-Ring: 008 10 1.3750515 1 3/8” GO Box / Tear Drop w/Pressure Connector

*KIT-40103 Includes: CON0012A Pressure Connector 3005 Contact Insulator 3006 Brass Contact 3007 Insulator HOO0094 6-32 x 3/16” Pan Head Screw S.S. Does not include O-Rings

CON0111 includes: BOOT Teflon® Insulator Crimp ContactCON0112 includes: BOOT Teflon® Insulator Crimp Contact**Sold as KIT Only

1

2

8

3

9

4

6

7

5

1 3/16” -12 UN-2B

1 3/16” - 12 UN-2A

10

CON0111CON0112

ADAPTOR

Page 161: AES Catalog

D-48

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Box/Tear Drop With Pressure Connector & Ground Screw

SPECIFICATIONS AS40103Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 2.915 in. (74.041 mm)Tool weight 0.9 lb. (0.408 kg)Shipping length 8.915 in. (226.441 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop w/Pressure connector Male (1 3/16” - 12 UN)

Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 162: AES Catalog

D-49

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” GO Pin/Tear Drop With Pressure Connector & Ground Screw Ref. Part No. Description 1 AS40104 1 3/8” GO Pin / Tear Drop w/Pressure Connector & Ground Screw 2 KIT-40104* Complete Kit Assy 3 CON0099 Pressure Connector 4 2493 Contact Insulator 5 1.0033 Contact Plunger 6 1.0041 Insulator 7 HOO0065 Retainer Ring, #51 8 HOO0094 6-32 x 3/16” Pan Head Screw S.S. 9 OOV0008-95 Viton 95 O-Ring: 008 10 PSA024 Contact11 1.0037 Spring12 OOV0211-95 Viton 95 O-Ring: 211 13 1.3750516 1 3/8” Tear Drop w/Pressure Connector

*KIT-40104 Includes: 1.0033 Contact Plunger 1.0037 Spring CON0099 Pressure Connector (2) 1.0041 Insulator HOO0065 Retainer Ring, #51 PSA024 Contact HOO0094 6-32 x 3/16” Pan Head Screw S.S. 2493 Contact InsulatorDoes not include O-Rings

CON0111 includes: BOOT Teflon® Insulator Crimp ContactCON0112 includes: BOOT Teflon® Insulator Crimp Contact**Sold as KIT Only

1

2

11

4

7

5

12

10

9

3

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2A

6

13

6

CON0111CON0112

ADAPTOR

8

Page 163: AES Catalog

D-50

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Pin/Tear Drop With Pressure Connector & Ground Screw

SPECIFICATIONS AS40104Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.360 in. (34.544 mm)Tool weight 1 lb. (0.454 kg)Shipping length 7.360 in. (186.944 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Tear Drop w/Pressure connect Male (1 3/16” - 12 UN)

Page 164: AES Catalog

D-51

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1” GO Box to 1 3/8” GO Box 1” GO Pin to 1 3/8” GO Pin Ref. Part No. Description 1 AS40030 1” GO Box to 1 3/8” GO Box Complete Assy 2 AS40045 1” GO Pin to 1 3/8” GO Pin Complete Assy 3 KIT-40030* Complete Kit Assy 4 KIT-40045** Complete Kit Assy 5 1.0087A 10-32 Contact Receptacle 6 1.0086 Beveled Insulating Washer 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 1.3750433 Contact Rod 10-32 x 1.200 9 1.3750148 Contact Sub Body10 1.0033 Contact Plunger11 HOO0065 Retainer Ring, #5112 1.0041 Insulating Washer13 OOV0211-95 Viton 95 O-Rings: 21114 1.0028 Contact Insulator15 1.0037-1 Contact Spring16 1.3750215 Contact Sub Body17 OOV0115-95 Viton 95 O-Rings: 115 18 1.0087B 10-32 Contact Receptacle

*KIT-40030 Includes: (1) 1.0087A 10-32 Contact Receptacle (2) 1.0086 Beveled Insulating Washer 1.3750433 Contact Rod 10-32 x 1.200 LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0087B 10-32 Contact ReceptacleDoes not include O-Rings

**KIT-40045 Includes: 1.0028 Contact Insulator (2) 1.0033 Contact Plunger 1.0037-1 Contact Spring (2) 1.0041 Insulating Washer (2) HOO0065 Retainer Ring, #51Does not include O-Rings

1 3 9

18

6

7

8

6

5

2

4 16

13

17

10

11

12

14

15

12

11

10

13/16” - 16 UN-2A

1 3/16” - 12 UN-2A

1 3/16”-12 UN-2B

13/16”-12 UN-2B

ADAPTOR

Page 165: AES Catalog

D-52

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1” GO Box to 1 3/8” GO Box 1” GO Pin to 1 3/8” GO Pin

SPECIFICATIONS AS40045 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.575 in. (40.005 mm)Tool weight 0.97 lb. (0.44 kg)Shipping length 7.575 in. (192.405 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Male (13/16” - 16 UN)

SPECIFICATIONS AS40030 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 5.375 in. (136.525 mm)Tool weight 1.14 lb. (0.517 kg)Shipping length 11.375 in. (288.925 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (13/16” - 16 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

AS40030

AS40045

Page 166: AES Catalog

D-53

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Atlas Box To 1 3/8” GO Pin 1 3/8” Tear Drop To 1 3/8” Atlas Box Ref. Part No. Description 1 AS40010 1 3/8” Atlas Box to 1 3/8” GO Pin Assy 2 AS40011 1 3/8” Tear Drop to 1 3/8” Atlas Box Assy 3 KIT-40010* Complete Kit Assy 4 KIT-40011** Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 LAF00128 Insulating Washer 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.0124 Contact Insulator10 1.0037-1 Contact Spring 11 1.3750114 Contact Sub Body 12 1.3750030 10-32 Cone Nut13 LBOO0032 Teflon® Tubing, #4 Thin Wall14 HOO0095 10-32 x 2” Pan Head Screw, S.S.15 1.0042 Contact Insulator16 1.0037 Contact Spring17 1.3750124 Contact Sub Body18 1.0041 Insulating Washer

*KIT-40010 Includes: (2) LAF00128 Insulating Washer (2) LAF00011 Contact Plunger HOO0065 Retainer Ring, #51 1.0037-1 Contact Spring 1.0124 Contact InsulatorDoes not include O-Rings

**KIT-40011 Includes: (2) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00011 Contact Plunger 1.0037 Contact Spring HOO0095 10-32 x 2” Pan Head Screw, S.S. 1.0042 Contact Insulator HOO0065 Retainer Ring, #51 1.3750030 10-32 Cone Nut LAF00128 Insulating WasherDoes not include O-Rings

1 3

11

8

5

6

7

9

10

7

5

12

7

13

14

7

15

16

7

6

5

4

172

1 1/8”-12 UNF-2B

1 1/8”-12 UNF-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

ADAPTOR

Page 167: AES Catalog

D-54

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Atlas Box To 1 3/8” GO Pin 1 3/8” Tear Drop To 1 3/8” Atlas Box

SPECIFICATIONS AS40011Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 4.237 in. (107.62 mm)Tool weight 1.42 lb. (0.644 kg)Shipping length 10.237 in. (260.02 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN) Bottom connection ATLAS TYPE Female (1 1/8” - 12 UNF)

SPECIFICATIONS AS40010 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 4.413 in. (112.09 mm)Tool weight 1.52 lb. (0.689 kg)Shipping length 10.413 in. (264.49 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection ATLAS TYPE Female (1 1/8” - 12 UNF)

AS40010

AS40011

Page 168: AES Catalog

D-55

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Atlas Pin To 1 3/8” GO Box 1 3/8” Atlas Pin To 1 3/8” GO Pin

1

3

5

6

7

8

9

10

12

11

2

5

6

7

8

13

14

6

15

16

17

6

1918

4

Ref. Part No. Description 1 AS40021 1 3/8” Atlas Pin to 1 3/8” GO Box Assy 2 AS40008 1 3/8” Atlas Pin to 1 3/8” GO Pin Assy 3 KIT-40021* Complete Kit Assy 4 KIT-40008** Complete Kit Assy 5 1.3750120 Atlas Contact 6 1.0041 Insulating Washer 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 OOV0213-95 Viton 95 O-Rings: 213 9 1.3750451 Contact Rod 10-32 x 2.00010 1.0086 Beveled Insulating Washer 11 1.3750038 Contact Sub Assembly 12 1.0087A 10-32 Contact Receptacle13 HOO0095 10-32 X 2.000 Pan Head Screw, S.S.14 1.3750119 Contact Sub Body15 1.0042 Contact Insulator16 1.0037 Contact Spring17 OOV0211-95 Viton 95 O-Rings: 211 18 HOO0065 Retainer Ring, #5119 LAF00011 Contact Plunger

*KIT-40021 Includes: 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer 1.3750120 Atlas Contact 1.3750451 Contact Rod 10-32 x 2.000 LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0087A 10-32 Contact ReceptacleDoes not include O-Rings

**KIT-40008 Includes: (3) 1.0041 Insulating Washer 1.3750120 Atlas Contact LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0033 Contact Plunger 1.0037 Contact Spring HOO0095 10-32 X 2.000 Pan Head Screw S.S. 1.0042 Contact Insulator HOO0065 Retainer Ring, #51Does not include O-Rings

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

ADAPTOR

Page 169: AES Catalog

D-56

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Atlas Pin To 1 3/8” GO Box 1 3/8” Atlas Pin To 1 3/8” GO Pin

SPECIFICATIONS AS40008Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.437 in. (36.513 mm)Tool weight 1.16 lb. (0.526 kg)Shipping length 7.437 in. (188.8998 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection ATLAS TYPE Male (1 1/8” - 12 UNF) Bottom connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS40021 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 2.875 in. (73.025 mm)Tool weight 1.05 lb. (0.476 kg)Shipping length 8.875 in. (225.425 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection ATLAS TYPE Male (1 1/8” - 12 UNF) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

AS40021

AS40008

Page 170: AES Catalog

D-57

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

5/8” Sucker Rod Pin To 1 3/8” Atlas Box5/8” Sucker Rod Box To 1 3/8” Atlas Box5/8” Sucker Rod Double Box5/8” Sucker Rod Box To 5/8” Sucker Rod Pin5/8” Sucker Rod Box To 1 3/8” McCullough Pin5/8” Double Sucker Rod PinRef. Part No. Description 1 AS40028 5/8” Sucker Rod Pin to 1 3/8” Atlas Box 2 AS40029 5/8” Sucker Rod Box to 1 3/8” Atlas Box 3 AS40037 5/8” Sucker Rod Double Box 4 AS40038 5/8” Sucker Rod Box to 5/8” Sucker Rod Pin 5 AS40040 5/8” Sucker Rod Box to 1 3/8” McCullough Pin 6 OOV0213-95 Viton 95 O-Rings: 213 7 AS40093 5/8” Double Sucker Rod Pin

Note: All sucker rod threads are 15/16 - 10 NS

1

3 4

2

5 7

6

1 1/8” - 12 UNF

1 1/8” - 12 UNF 15/16” - 10 NS

15/16” - 10 NS

15/16” - 10 NS

15/16” - 10 NS

15/16” - 10 NS

ADAPTOR

Page 171: AES Catalog

D-58

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

5/8” Sucker Rod Pin To 1 3/8” Atlas Box5/8” Sucker Rod Box To 1 3/8” Atlas Box5/8” Sucker Rod Double Box5/8” Sucker Rod Box To 5/8” Sucker Rod Pin5/8” Sucker Rod Box To 1 3/8” McCullough Pin5/8” Double Sucker Rod Pin

SPECIFICATIONS AS40028 AS40029 Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 2.532 in. (64.313 mm) 5 in. (127 mm)Tool weight 0.71 lb. (0.332 kg) 1.25 lb. (0.567 kg)Shipping length 8.532 in. (216.7128 mm) 11 in. (279.4 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection 5/8” Sucker Rod Male (15/16” - 10 NS) 5/8” Sucker Rod Female (15/16” - 10 NS)

Bottom connection ATLAS TYPE Female (1 1/8” - 12 UNF) ATLAS TYPE Female (1 1/8” - 12 UNF)

SPECIFICATIONS AS40037 AS40038 Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 4.330 in. (109.98 mm) 2 in. (50.8 mm)Tool weight 1.21 lb. (0.549 kg) 0.77 lb. (0.349 kg)Shipping length 10.330 in. (262.382 mm) 8 in. (203.2 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection 5/8” Sucker Rod Female (15/16” - 10 NS) 5/8” Sucker Rod Female (15/16” - 10 NS)

Bottom connection 5/8” Sucker Rod Female (15/16” - 10 NS) 5/8” Sucker Rod Male (15/16” - 10 NS)

SPECIFICATIONS AS40040 AS40093 Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 2.532 in. (64.313 mm) 1 in. (25.4 mm)Tool weight 0.98 lb. (0.445 kg) 0.79 lb. (0.358 kg)Shipping length 8.532 in. (216.7128 mm) 7 in. (177.8 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection 5/8” Sucker Rod Female (15/16” - 10 NS) 5/8” Sucker Rod Male (15/16” - 10 NS)

Bottom connection ATLAS TYPE Male (1 1/8” - 12 UNF) 5/8” Sucker Rod Male (15/16” - 10 NS)

AS40028 AS40029

AS40037 AS40038

AS40040 AS40093

Page 172: AES Catalog

D-59

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Schlumberger Box To 1 3/8” Tear Drop 1 3/8” Schlumberger Pin To 1 3/8” Tear Drop Ref. Part No. Description 1 AS40048 1 3/8” Schlumberger Box to 1 3/8” Tear Drop Sub Assy 2 AS40049 1 3/8” Schlumberger Pin to 1 3/8” Tear Drop Sub Assy 3 KIT-40048* Complete Kit Assy 4 KIT-40049** Complete Kit Assy 5 1.3750030 10-32 Cone Nut 6 1.0041 Insulating Washer 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 1.3750436 Contact Rod 10-32 x 2.500 9 1.0086 Beveled Insulating Washer 10 1.4370039 10-32 Schlumberger Contact11 1.3750218 Contact Sub Body12 1.3750450 Contact Rod 10-32 x 3.25013 1.3750219 Contact Sub Body14 1.3750172 Contact Insulator15 PSA014 Pre-Sub Assembly Contact16 OOV0210-95 Viton 95 O-Rings: 210

*KIT-40048 Includes: 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750436 Contact Rod 10-32 x 2.500 1.0086 Beveled Insulating Washer 1.4370039 10-32 Schlumberger Contact 1.3750030 10-32 Cone Nut Does not include O-Rings

**KIT-40049 Includes: 1.3750172 Contact Insulator 1.3750450 Contact Rod 10-32 x 3.250 PSA014 Pre-Sub Assembly Contact 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1

3

5

6

8

7

9

10

11

5

6

7

12

13

14

15

16

2

4

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

1 1/8”-12 UNF-2B

1 1/8”-12 UNF-2A

ADAPTOR

Page 173: AES Catalog

D-60

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Schlumberger Box To 1 3/8” Tear Drop 1 3/8” Schlumberger Pin To 1 3/8” Tear Drop

SPECIFICATIONS AS40049Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1 in. (25.4 mm)Tool weight 1.1 lb. (0.499 kg)Shipping length 7 in. (177.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN) Bottom connection Schlumberger TYPE Male (1 1/8” - 12 UNF)

SPECIFICATIONS AS40048 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 3.875 in. (98.425 mm)Tool weight 1.15 lb. (0.52 kg)Shipping length 9.875 in. (250.825 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN) Bottom connection Schlumberger TYPE Female (1 1/8” - 12 UNF)

AS40048 AS40049

Page 174: AES Catalog

D-61

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” Schlumberger Box To 1 3/8” GO Pin 1 3/8” Schlumberger Pin To 1 3/8” GO Pin Ref. Part No. Description 1 AS40012 1 3/8” Schlumberger Box to 1 3/8” GO Pin Assy 2 AS40052 1 3/8” Schlumberger Pin to 1 3/8” GO Pin Assy 3 KIT-40012* Complete Kit Assy 4 KIT-40052** Complete Kit Assy 5 1.4370039 10-32 Schlumberger Contact 6 1.0086 Beveled Insulating Washer 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 HOO0099 10-32 x 7/8” Pan Head Screw, S.S. 9 1.0041 Insulating Washer 10 1.3750256 Contact Sub Body11 1.0042 Contact Insulator12 1.0037 Contact Spring13 HOO0065 Retainer Ring, #5114 OOV0211-95 O-Rings: 211 V9515 1.0033 Contact Plunger16 OOV0210-95 Viton 95 O-Rings: 21017 PSA014 Contact Assy18 1.3750172 Contact Insulator19 HOO0137 10-32 x 1 1/4” Pan Head Screw, S.S.20 1.3750220 Contact Sub Body

*KIT-40012 Includes: 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0099 10-32 x 7/8” Pan Head Screw, S.S. HOO0065 Retainer Ring, #51 1.0033 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.4370039 10-32 Schlumberger Contact* Does not include O-Rings

**KIT-40052 Includes: 1.0033 Contact Plunger LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0137 10-32 x 1 1/4” Pan Head Screw, S.S. 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750172 Contact Insulator PSA014 Contact Assembly* Does not include O-Rings

1

3

5

6

7

8

9

11

12

14

91315

10

2

416

17

187

19

15 13 9

14

11

920

12

1 1/8”-12 UNF-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

1 1/8”-12 UNF-2A

ADAPTOR

Page 175: AES Catalog

D-62

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Schlumberger Box To 1 3/8” GO Pin 1 3/8” Schlumberger Pin To 1 3/8” GO Pin

SPECIFICATIONS AS40052Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.01 in. (25.65 mm)Tool weight 1.09 lb. (0.494 kg)Shipping length 7.01 in. (178.054 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Schlumberger TYPE Male (1 1/8” - 12 UNF) Bottom connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS40012 Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 4.455 in. (113.157 mm)Tool weight 1.38 lb. (0.626 kg)Shipping length 10.455 in. (265.557 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Schlumberger TYPE Female (1 1/8” - 12 UNF) Bottom connection Go TYPE Male (1 3/16” - 12 UN)

AS40012 AS40052

Page 176: AES Catalog

D-63

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” GO Pin to 1 3/8” McCullough Pin

Ref. Part No. Description 1 AS40039 1 3/8” GO Pin to 1 3/8” McCullough Pin Assy 2 KIT-40006* Complete Kit Assy 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 LBOO0032 Teflon® Tubing, #4 Thin Wall 9 HOO0095 10-32 x 2.000 Pan Head Screw, S.S.10 1.3750186 Contact Sub Body11 OOV0213-95 Viton 95 O-Rings: 21312 1.0086 Beveled Insulating Washer13 1.3750102 10-32 Contact Recptacle14 1.0033 Contact Plunger

*KIT-40006 Includes: (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0037 Contact Spring HOO0065 Retainer Ring, #51 1.0033 Contact Plunger 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750102 10-32 Contact Recptacle HOO0095 10-32 x 2.000 Pan Head Screw, S.S.Does not include O-Rings

1

2

34

5

6

7

4

8

10

9

12 11

13

1 1/8”-12 UNF-2A

1 3/16”-12 UN-2A

14

ADAPTOR

Page 177: AES Catalog

D-64

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Pin to 1 3/8” McCullough Pin

SPECIFICATIONS AS40039Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.813 in. (46.05 mm)Tool weight 1.32 lb. (0.599 kg)Shipping length 7.813 in. (198.4502 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection McCullough TYPE Male (1 1/8” - 12 UNF)

Page 178: AES Catalog

D-65

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” GO Box to 1 3/8” McCullough Box

Ref. Part No. Description 1 AS40013 1 3/8” GO Box to 1 3/8” McCullough Box Assy 2 KIT-40013* Complete Kit Assy 3 1.0087A 10-32 Contact Receptacle 4 1.0086 Beveled Insulating Washer 5 LBOO0032 Teflon® Tubing, #4 Thin Wall 6 1.3750433 Contact Rod 10-32 x 1.200 7 CON0033 10-32 Banana Plug 8 1.3750086 Contact Sub Body

*KIT-40013 Includes: 1.0087A 10-32 Contact Receptacle (2) 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750433 Contact Rod 10-32 x 1.200 CON0033 10-32 Banana PlugDoes not include O-Rings

1

2

3

4

6

5

4

7

8

1 3/16”-12 UN-2B

1 1/8”-12 UNF-2B

ADAPTOR

Page 179: AES Catalog

D-66

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO box to 1 3/8” McCullough BOX

SPECIFICATIONS AS40013Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 5.27 in. (133.86 mm)Tool weight 1.18 lb. (0.535 kg)Shipping length 11.27 in. (286.258 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Bottom connection McCullough TYPE Female (1 1/8” - 12 UNF)

Page 180: AES Catalog

D-67

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

1 3/8” SIE Box to 1 3/8” GO Box

Ref. Part No. Description 1 AS40031 1 3/8” SIE Box to 1 3/8” GO Box Assy 2 KIT-40031* Complete Kit Assy 3 1.3750157 10-32 SIE Contact Receptacle 4 1.0086 Beveled Insulating Washer 5 LBOO0032 Teflon® Tubing, #4 Thin Wall 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 HOO0065 Retainer Ring, #5110 1.0033 Contact Plunger11 1.3750155 Contact Sub Body12 HOO0095 10-32 x 2.000 Pan Head Screw, S.S.13 OOV0211-95 O-Rings: 211 V95

*KIT-40031 Includes: (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0037 Contact Spring HOO0065 Retainer Ring, #51 1.0033 Contact Plunger 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750157 10-32 SIE Contact Receptacle HOO0095 10-32 x 2.000 Pan Head Screw, S.S.Does not include O-Rings

1

2

3

4

5

12

6

7

8

13

10

6

9

11

1 1/8”-12 UNF-2B

1 3/16”-12 UN-2A

ADAPTOR

Page 181: AES Catalog

D-68

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” SIE Box to 1 3/8” GO Box

SPECIFICATIONS AS40031Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 5.875 in. (149.225 mm)Tool weight 1.8 lb. (0.816 kg)Shipping length 11.875 in. (301.625 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection SIE TYPE Female (1 1/8” - 12 UNF) Bottom connection Go TYPE Male (1 3/16” - 12 UN)

Page 182: AES Catalog

D-69

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

5/8” Sucker Rod Box to 1 3/8” GO Box5/8” Sucker Rod Pin to 1 3/8” GO Box5/8” Sucker Rod Box to 1 3/8” GO Pin5/8” Sucker Rod Pin to 1 3/8” GO Pin Ref. Part No. Description 1 AS40023 5/8” Sucker Rod Box to 1 3/8” GO Box Assy 2 AS40024 5/8” Sucker Rod Pin to 1 3/8” GO Box Assy 3 AS40025 5/8” Sucker Rod Box to 1 3/8” GO Pin Assy 4 AS40044 5/8” Sucker Rod Pin to 1 3/8” GO Pin Assy 5 KIT-40025* Complete Kit Assy 6 1.0033 Contact Plunger 7 HOO0065 Retainer Ring, #51 8 1.0041 Insulating Washer 9 1.0042 Contact Insulator10 OOV0211-95 Viton 95 O-Rings: 211 11 1.0037 Contact Spring12 1.3750121 Contact Sub Body13 1.3750214 Contact Sub Body

*KIT-40025 Includes: HOO0065 Retainer Ring, #51 1.0033 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact InsulatorDoes not include O-Rings

6

5

4

13

78

9

10

11

12

11

9

10

8

76

5

3

1

2

15/16” - 10 UNS

15/16” - 10 NS

15/16” - 10 NS

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

ADAPTOR

Page 183: AES Catalog

D-70

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

5/8” Sucker Rod Box to 1 3/8” GO Box5/8” Sucker Rod Pin to 1 3/8” GO Box5/8” Sucker Rod Box to 1 3/8” GO Pin5/8” Sucker Rod Pin to 1 3/8” GO Pin

SPECIFICATIONS AS40023 AS40024 Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 4.7 in. (129.38 mm) 2.532 in. (64.313 mm)Tool weight 1.17 lb. (0.531 kg) 1 lb. (0.454 kg)Shipping length 10.7 in. (271.78 mm) 8.532 in. (216.7128 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection 5/8” Sucker Rod Male (15/16” - 10 NS) 5/8” Sucker Rod Male (15/16” - 10 NS)

SPECIFICATIONS AS40025 AS40044 Tool diameter (O.D.) 1.375 in. (34.925 mm) 1.375 in. (34.925 mm)Tool length 2.812 in. (71.425 mm) 1.5 in. (38.1 mm)Tool weight 1 lb. (0.454 kg) 1.08 lb. (0.49 kg)Shipping length 8.812 in. (223.8248 mm) 7.5 in. (190.5 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

Bottom connection 5/8” Sucker Rod Female (15/16” - 10 NS) 5/8” Sucker Rod Male (15/16” - 10 NS)

AS40023 AS40024

AS40025 AS40044

Page 184: AES Catalog

D-71

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Sondex Pin To Go Box

Ref. Part No. Description 1 AS40106 1 3/8” Sondex Pin To Go Box 2 1.0087A Contact Receptacle 3 1.0086 Insulator Washer Beveled 4 1.0203 Contact Rod 10-32 x 1.750 long 5 LBOO0032 Teflon Tubing #4 Thin Wall 6 OOV0211-95 Viton 95 O-Ring: 211

1

6

2

3

4

5

Page 185: AES Catalog

D-72

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Sondex Pin To Go Box

SPECIFICATIONS AS40106Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 3.125 in. (79.375 mm)Tool weight Available upon requestShipping length 9.125 in. (231.775 mm)Temperature rating 500°F (260°C)Pressure rating 15000 psi (103 MPa)Top connection SONDEX TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 186: AES Catalog

D-73

COMPONENTS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” GO Pin To Sondex Box

Ref. Part No. Description 1 AS40105 GO Pin To Sondex Box 2 HOO0065 Retainer Ring, #51 3 1.0041 Insulating Washer 4 1.0033 Contact Plunger 5 1.0042 Plunger Insulator 6 5683-1 Beveled Insulator 7 CON0088 Banana Pin 8 LBOO0032 Teflon Tubing #4 Thin Wall 9 OOV0211-95 Viton 95 O-Ring: 21110 HOO0177 10-32 x 1 1/2” RND HD Screw11 1.0037 Contact Spring

1

32

9

5

11

8

10

6

7

4

Page 187: AES Catalog

D-74

SPECIFICATIONS

<< Return to Section D Menu << Return to Main Menu

ADAPTOR

1 3/8” Go Pin To Sondex Box

SPECIFICATIONS AS40105Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 3.75 in. (95.25 mm)Tool weight Available upon requestShipping length 9.75 in. (247.65 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Sondex TYPE Female (1 3/16” - 12 UN)

Page 188: AES Catalog
Page 189: AES Catalog

<< Return to Main Menu

SECTION E

1 7/16”Table of Contents - 1 7/16”

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

PAGE TOOLCABLE HEADSE-1 1 7/16” Cable Head Assembly (Cone & Washer) E-3 1 7/16” Cable Head Assembly (Clamp Ring) E-5 1 7/16” GO Split Cable Head Assembly

SINKER BARSE-7 1 7/16”x5’ Steel Sinker Bar Assembly 1 7/16”x5’ Tungsten Sinker Bar Assembly 1 7/16”x7’ Tungsten Sinker Bar Assembly 1 7/16”x5’ Lead Sinker Bar Assembly 1 7/16”x7’ Lead Sinker Bar Assembly

CASING COLLAR LOCATORSE-9 1 7/16” Casing Collar Locator Assembly (NG) E-11 1 7/16” Casing Collar Locator Assembly (G)

DECENTRALIZERS & CENTRALIZERSE-13 1 7/16” Mechanical Decentralizer E-15 1 7/16” Mechanical Bottom Decentralizer E-17 1 7/16” Spring Centralizer

KNUCKLE JOINTS, SWIVELS, SKATES & SHOCK SUBSE-19 1 7/16” Wireline Skate, 1 5/8” Drift E-21 1 7/16” Knuckle Joint Complete Assembly

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBSE-23 1 7/16” GO Tear Drop Sub Complete Assembly 1 7/16” GO Tear Drop Sub To 1 3/8” GO Box AssemblyE-25 1 7/16” GO Double Pin Assembly 1 7/16” GO Double Box Assembly E-27 1 7/16” GO Double Sealed Tear Drop AssemblyE-29 1 7/16” GO Tear Drop Sub High Amp E-31 1 7/16” Double Sealed Tear Drop w/Adjustment Ring 1 7/16” GO Double Pin Sub w/Adjustment Ring E-33 1 7/16” GO Pin to 1” GO Box Assembly 1 7/16” GO Box to 1” GO Pin Assembly

Page 190: AES Catalog

E-1

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

CABLE HEAD

1 7/16” Cable Head Assembly (Cone & Washer)

1

2

3

5

4

1 3/16” - 12 UN-2A

Ref. Part No. Description 1 AS50012** 1 7/16” Cable Head Complete Assy (Cone & Washer) 2 1.4370044** 1 7/16” Fishing Neck (1”) 3 1.4370047** Cable Head Cone 4 1.4370082 Cable Head Washer 5 1.4370045 1 7/16” Cable Head Sleeve 6 AS50014 1 7/16” Tear Drop Sub Assy 7 KIT-50014* Complete Kit Assy 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.4370051 1 7/16” Tear Drop Sub Body10 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)11 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot **Specify line size when ordering*** Sold Separately

*KIT-50014 Includes: 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger (2) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2” Pan Head Screw, S.S. LAF00128 Insulating WasherDoes not include O-Rings

1 3/16”-12 UN-LH (Left Hand)

6

7

9 8

10

11

Page 191: AES Catalog

E-2

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

CABLE HEAD

1 7/16” Cable Head Assembly (Cone & Washer)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

SPECIFICATIONS AS50012Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 12.515 in. (317.881 mm)Tool weight 3.75 lb. (1.7 kg)Shipping length 18.515 in. (470.281 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Pin (1 3/16” - 12 UN)

Page 192: AES Catalog

E-3

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

CABLE HEAD

1 7/16” Cable Head Assembly (Clamp Ring)

Ref. Part No. Description 1 AS50013** 1 7/16” Cable Head Complete Assy (Clamp ring) 2 1.4370008 Rope Socket Body for 5/16” Line 1.4370016 Rope Socket Body for 7/32” Line 1.4370016 Rope Socket Body for 3/16” Line 1.4370014 Rope Socket Body for 7/16” Line 3 HOO0111 3/8 - 24 x 5/16” Socket Set Screw 4 1.4370009 Clamp Ring for 7/32” & 5/16” Line 1.4370012 Clamp Ring for 7/16” Line 5 1.4370001** 1 7/16” Cable Head Body 6 1.4370051 1 7/16” Tear Drop Sub Body 7 OOV0211-95 Viton 95 O-Rings: 211 8 AS50014 1 7/16” Tear Drop Assy 9 KIT-50014* Contact Kit Complete Assy 10 EXP015 1 7/16” Rope Socket Tool11 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)12 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot **Specify line size when ordering.***Sold Separately

*KIT-50014 Includes: 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger LAF00128 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2” Pan Head Screw, S.S.Does not include O-Rings

8

96

11

7

1

4

2

3

5

1 3/16” - 12 UN-2A

10

12

Page 193: AES Catalog

E-4

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

CABLE HEAD

1 7/16” Cable Head Assembly (Clamp Ring)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

SPECIFICATIONS AS50013Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 12.330 in. (313.182 mm)Tool weight 4.188 lb. (1.896 kg)Shipping length 18.330 in. (465.852 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 194: AES Catalog

E-5

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

CABLE HEAD

1 7/16” GO Split Cable Head

Ref. Part No. Description1 AS50009** 1 7/16” GO Split Cable Head Complete Assembly2 1.4370082 Cable Head Washer3 1.4370048** GO Split Cable Head Top Sub4 1.4370045 Cable Head Sleeve 5 AS50014 1 7/16” Tear Drop Sub Assy 6 1.4370047** GO Type Cable Head Cone7 00V0211-95 Viton 95 O-Rings: 2118 1.4370114 1 7/16” Fishing Neck9 KIT-50014* Complete Kit Assy10 BOO103-1/16*** Tear Drop Rubber Boot BOO103-1/8*** Tear Drop Rubber Boot BOO103-3/16*** Tear Drop Rubber Boot**Specify line size when ordering.***Sold Separately

Optional:11 AS6003OTL 5’ Tungsten OTL Sinker Bar AS6004OTL 7’ Tungsten OTL Sinker Bar

*KIT-50014 Includes: 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger (3) LAF00128 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2” Pan Head Screw, S.S.Does not include O-Rings

3

6

4

2

8

5

1 3/16”-12 UN-2A

1 3/16”-12 UN-2BLeft Handed

1 3/16”-12 UN-2A

1

7

1 3/16”-12 UN-2A

11

9

10

Page 195: AES Catalog

E-6

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

CABLE HEAD

1 7/16” GO Split Cable Head

SPECIFICATIONS AS50009Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 18.2 in. (462.28 mm)Tool weight 4.813 lbs. (2.183 kg)Shipping length 24.2 in. (609.6 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical and electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

Page 196: AES Catalog

E-7

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

SINKER BAR

2

3

4

5

16

6

15

7

8

5 9

10

11

12

14

1 13

16

1 7/16” Sinker Bars Ref. Part No. Description 1 AS50016 1 7/16” X 5’ Steel Sinker Bar Assy AS50004 1 7/16” X 5’ Tungsten Sinker Bar Assy AS50005 1 7/16” X 7’ Tungsten Sinker Bar Assy AS50021 1 7/16” X 5’ Lead Sinker Bar Assy AS50022 1 7/16” X 7’ Lead Sinker Bar Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 OOV0211-95 Viton 95 O-Rings: 211 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 Contact Nut 9 LBOO0032 Teflon® Tubing, #4 Thin Wall10 1.3750296 Assy Contact Thru Rod For 5’ BARS (Plunger Contact) 1.3750184 Assy Contact Thru Rod For 7’ BARS (Plunger Contact)11 1.0086 Insulating Bevel Washer12 1.0087A Contact Receptacle13 KIT-40004* All 5’ Bars Listed Above (Plunger Contact) KIT-40015** All 7’ Bars Listed Above (Plunger Contact)14 1.3750067 1 3/8” Thread Protector, Box (Not Shown)15 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)16 KIT-40004LR*** Complete Kit Assy17 LAF00128 Insulating Washer

*KIT-40004 Includes: 1.3750296 Assy Contact Thru Rod For 5’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)Does not include O-Rings

**KIT-40015 Includes: 1.3750184 Assy Contact Thru Rod For 7’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)Does not include O-Rings

***KIT-40004LR Includes: LAF00011 Contact Plunger 1.0086 Insulating Bevel Washer 1.3750081 Contact Nut HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 197: AES Catalog

E-8

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

SPECIFICATIONS AS50021 AS50022 Tool diameter (O.D.) 1.437 in. (36.513 mm) 1.4437 in. (36.513 mm)Tool length 60 in. (1524 mm) 84 in. (2133.6 mm)Tool weight 30 lb. (12.61 kg) 42 lb. (19.05 kg)Shipping length 66 in. (1524 mm) 90 in. (2286 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS50004 AS50005 Tool diameter (O.D.) 1.437 in. (36.513 mm) 1.437 in. (36.513 mm)Tool length 60 in. (1524 mm) 84 in. (2133.6 mm)Tool weight 40 lb. (18.14 kg) 57 lb. (25.85 kg)Shipping length 66 in. (1676.4 mm) 90 in. (2286 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS50016Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 60 in. (1524 mm)Tool weight 27 lb. (12.25 kg)Shipping length 66 in. (1676.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

SINKER BAR

1 7/16” Sinker Bars

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Steel, tungsten and lead models available

Page 198: AES Catalog

E-9

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

CASING COLLAR LOCATOR

1 7/16” Casing Collar Locator (Non-Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded1 AS50006 1 7/16” Casing Collar Locator Complete Assy (NG)2 1.4370057 Contact Rod 10-32 x 8.7503 SEM0069 Double Diode4 1.3750041 CCL Upper Contact5 HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S.6 1.4370031 Magnet Retainer7 PSA043UN Grounded Coil (Universal)8 1.4370028 Retainer Insulator9 HOO0058 10-32 Hex Nut, S.S.10 1.3750073-1 CCL Magnet11 HOO0004 4–40 x 3/16” Pan Hd. Screw, S.S.12 HOO0126 Ground Spring13 LB000032 Teflon® Tubing, #4 Thin Wall14 1.4370029 Lower CCL Insulator15 1.3750041-1 1-7/16 Lower Contact16 HOO0250 Retainer Ring, #10617 1.4370010 1 7/16” CCL Housing18 AS50006-1 CCL Coil & Magnet Assy (NG)19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)

KIT-50006 Includes: (2) HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S. 1.4370028 Retainer Insulator 1.3750041 CCL Upper Contact 1.3750041-1 1-7/16 Lower Contact 1.4370029 Lower CCL Insulator 1.4370057 Contact Rod 10-32 x 8.750 SEM0069 Double Diode LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1

5

10

12

2

13

6

14

15

16

19

7

98

3

16

19

5

18

10

1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

4

17

11

Page 199: AES Catalog

E-10

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS50006

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with free point back off

Tool diameter (O.D.) 1 .437 in. (36.513 mm)Tool length 14.147 in. (359.3 mm)Tool weight 5.0 lbs (2.268 kg)Shipping length 17.147 in. (435.5 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (138 MPa)Coil resistance (approx.) 2.5K OhmsTop connection GO Type Female (1 3/16-12 UN)Bottom connection GO Type Female (1 3/16-12 UN)Sensor measure point 6.421 in. (163 mm) from bottom of tool

1 7/16” Casing Collar Locator (Non-Grounded)

The 1 7/16” Free Point Casing Collar Locator (Non-Grounded) detects casing collars and perforations in tubing or casing.

Page 200: AES Catalog

E-11

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

CASING COLLAR LOCATOR

1 7/16” Casing Collar Locator (Grounded)

1

16

4

98

3

5

19

6

10

17

13

18

7

11

12

2

10

14

15

16

19

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS50008 1 7/16” Casing Collar Locator Complete Assy (G) 2 1.4370057 Contact Rod 10-32 x 8.750 3 SEM0069 Double Diode 4 1.3750041 CCL Upper Contact 5 HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S. 6 1.4370031 Magnet Retainer 7 PSA043UN Grounded Coil (Universal) 8 1.4370028 Retainer Insulator 9 HOO0058 10-32 Hex Nut, S.S.10 1.3750073-1 CCL Magnet11 HOO0004 4–40 x 3/16” Pan Hd. Screw, S.S.12 HOO0126 Ground Spring13 LBOO0032 Teflon® Tubing, #4 Thin Wall14 1.4370029 Lower CCL Insulator15 1.4370026 Lower CCL Contact16 HOO0250 Retainer Ring, #10617 1.4370010 1 7/16” CCL Housing18 AS50008-1 CCL Coil & Magnet Assy (G)19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)

KIT-50008 Includes: 1.3750041 CCL Upper Contact HOO0004 4–40 x 1/8” Pan Hd. Screw, S.S. 1.4370028 Retainer Insulator 1.4370026 Lower CCL Contact 1.4370057 Contact Rod 10-32 x 8.750 SEM0069 Double Diode LBOO0032 Teflon® Tubing, #4 Thin Wall 1.4370028 Retainer Insulator 1.4370029 Lower CCL Insulator HOO0126 Ground SpringDoes not include O-Rings

1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

Page 201: AES Catalog

E-12

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS50008

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

Tool diameter (O.D.) 1 .437 in. (36.513 mm)Tool length 14.147 in. (359.3 mm)Tool weight 5.0 lbs (2.268 kg)Shipping length 17.147 in. (435.5 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (138 MPa)Coil resistance (approx.) 2.5K OhmsTop connection GO Type Female (1 3/16-12 UN) Bottom connection GO Type Female (1 3/16-12 UN)Sensor measure point 6.421 in. (163 mm) from bottom of tool

1 7/16” Casing Collar Locator (Grounded)

The 1 7/16” Casing Collar Locator (Grounded) detects casing collars and perforations in tubing or casing.

Page 202: AES Catalog

E-13

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

DECENTRALIZERS

1 7/16” Mechanical Decentralizer

Ref. Part No. Description 1 AS50034 1 7/16” Mechanical Decentralizer Assy 2 AS50037 1 7/16” Tear Drop / GO Pin 3 1.3750030 10-32 Cone Nut 4 OOV0211-95 Viton 95 O-Rings: 211 5 1.4370119 Contact Sub Body 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 HOO0065 Retainer Ring, #51 9 LAF00011 Contact Plunger10 1.0037 Contact Spring11 1.4370080 1 7/16” Adjustment Ring12 3670 Kick-over Tool Arm13 HOO0133 Roll Pin, 3/16” x 1” Spiral14 HOO0434 1/8” x 3/8” Roll Pin15 OMF0012 Spring 1 7/16” Mechanical Decentralizer16 HOO0355 Roll Pin, 3/16” x 1 1/2” S/S17 3262 1 7/16” Mechanical Decentralizer Double Box18 3643 Connecting Arm19 KIT-50037* Contact Kit Assy 20 1.3750537 Contact Rod 10-32 x 3.500”21 LBOO0032 Teflon® Tubing, #4 Thin Wall22 1.3750081 10-32 Contact23 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)24 5860 CE Retainer Sleeve25 LAF00128 Insulating Washer

*KIT-50037 Includes: 1.0042 Contact Insulator 1.3750081 10-32 Contact 1.3750537 Contact Rod 10-32 x 3.500” HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating Washer*Does not include O-Rings

1

14

18

15

16

13

12

17

19

2

6

21

21

6

3

7

6

8

9

4

10

23

11

5

22

20

6

20

710

11

5

19

2

9

4

3

6

6 23

8

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2A

Page 203: AES Catalog

E-14

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

DECENTRALIZERS

1 7/16” Mechanical Decentralizer

SPECIFICATIONS AS50034Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 30.25 in. (768.35 mm)Tool weight 10.7 lb. (4.85 kg)Shipping length 36.25 in. (920.75 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

Page 204: AES Catalog

E-15

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

DECENTRALIZERS

1 7/16” Mechanical Decentralizer Bottom

Ref. Part No. Description 1 AS50035 1 7/16” Mechanical Decentralizer Bottom Assy 2 3670 Kick-over Tool Arm 3 HOO0133 Roll Pin, 3/16” x 1” Spiral 4 HOO0434 1/8” x 3/8” Roll Pin 5 OMF0012 Spring 1 7/16” Mechanical Decentralizer 6 HOO0355 Roll Pin, 3/16” x 1 1/2” S/S 7 1.4370120 1 7/16” Kick-over Tool Housing 8 3643 Connecting Arm 9 5860 CE Retainer Sleeve

4

3

8

5

6

7

9

2

1

Page 205: AES Catalog

E-16

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

DECENTRALIZERS

1 7/16” Mechanical Decentralizer Bottom

SPECIFICATIONS AS50035Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 19.875 in. (504.825 mm)Tool weight 5.5 lb. (2.495 kg)Shipping length 25.875 in. (657.225 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection OVER The Line Female (Bolt TYPE)

Page 206: AES Catalog

E-17

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

CENTRALIZER

1 7/16” Spring Centralizer

Ref. Part No. Description 1 AS50023 1 7/16” Contact Centralizer Assy*** 2 KIT-50023* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Spacer Contact10 1.3750213 1 7/16” Split Collar (3 sided)11 HOO0154 8-32 x 1/4” Pan Head Screw S.S.12 HOO0147 6-32 x 1/4” Socket Head Cap Screw, Alloy13 OMF0006 Bow Spring (13 1/4” Max. Diameter)** OMF0007 Bow Spring (9 1/2” Max. Diameter)** OMF0008 Bow Spring (6 1/4” Max. Diameter)**14 1.3750212 1 7/16” Centralizer Mandrel15 LBOO0032 Teflon® Tubing, #4 Thin Wall16 1.3750458 Contact Rod 10-32 x 32.18717 1.0086 Beveled Insulating Washer18 1.0087A 10-32 Contact Receptacle19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)20 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)21 LAF00128 Insulating Washer**(3) Springs required on 1 7/16”***Depending on spring size

*KIT-50023 Includes: LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750458 Contact Rod 10-32 x 32.187 KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)Does not include O-Rings

KIT-40004LR Includes: LAF00011 Contact Plunger 1.0086 Beveled Insulating Washer 1.3750081 10-32 Spacer Contact HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A 10-32 Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

1

13

11

12

5

9

20

8

7

53

6

4

12

11

15

16

17

18

19

10

14

11

1110

2

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2B

Page 207: AES Catalog

E-18

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

CENTRALIZER

1 7/16” Spring Centralizer

SPECIFICATIONS AS50023Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 34.625 in. (879.475 mm)Tool weight 8.02 lb. (3.638 kg)Shipping length 40.625 in. (1031.875 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN) Min I.D. 1.625 in. (41.275 mm)Max I.D. 13.25 in. (336.55 mm), 9.5 in. (241.3 mm), 6.25 in. (158.75 mm)

Page 208: AES Catalog

E-19

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ACCESSORY

1 7/16” Wireline Skate, 1 5/8” Drift

Ref. Part No. Description 1 AS50032 1 7/16” Wireline Skate, 1 5/8” Drift 2 KIT-50032 Complete Kit Assy * 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.4370116 Skate Body12 1.6870389 Contact Rod 10-32 x 9.56213 1.0086 Insulating Washer14 1.0087A Contact Receptacle15 2335 Skate Wheel16 HOO0424 3/16” x 3/4” Spiral Roll Pin, S.S.17 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)18 1.3750067 1 3/8” Thread Protector, Box (Not Shown)19 LAF00128 Insulating Washer

*KIT-50032 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0086 Insulating Washer 1.0087A Contact Receptacle 1.3750081 10-32 Contact Receptacle 1.6870389 Contact Rod 10-32 x 9.562 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings.

19

1

2

5

4

7

17

9

6

10

16

15

16

12

13

14

11

3

8

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

18

Page 209: AES Catalog

E-20

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ACCESSORY

1 7/16” Wireline Skate, 1 5/8” Drift

SPECIFICATIONS AS50032Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool drift 1.625 in. (41.275 mm)Tool length 12 in. (304.8 mm)Tool weight 5.5 lb. (2.495 kg)Shipping length 18 in. (457.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 210: AES Catalog

E-21

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ACCESSORY

1 7/16” Knuckle Joint

Ref. Part No. Description 1 AS50015BJ 1 7/16” Knuckle Joint Complete Assembly 2 5511 1 7/16” Top Sub 3 5514 1 7/16 “ Sub 4 5513 Ball Housing 5 5516 Swivel Ball 6 5517 Rotation Cup 7 5512 1 7/16” Sub 8 5515 Bottom Sub 9 HOO0065 Retainer Ring, #5110 1.0042 Contact Insulator11 1.0037 Contact Spring12 1.3750139 Slack Joint Cone Nut13 1.0086 Insulator Washer Beveled14 1.0087A Contact Recepticle15 WIR1063 #20/120 3/4 Hard 304 White PFA16 OOV0211-95 Viton 95 O-Ring: 211 17 1.3750436 Contact Rod 10-32 x 2.50018 HOO0133 Roll Pin, 3/16 x 1 Spirol Chrome19 HOO0351 Roll Pin, 1/8 x 1 1/2, S.S.20 1.0041 Insulating Washer21 1.3750450 Contact Rod 10-32 x 3.25022 1.3750081 10-32 Contact 23 2351 Insulating Washer24 1.0033M Plunger GO Pin Modified25 1.3750067 1 3/8” Thread Protector, Box (Not Shown)26 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

AS50015BJ

1

21

12

22

2

16

9

23

26

10

11

2

20

24

4

18

719

5

12

17

13

8

25

3

6

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 211: AES Catalog

E-22

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ACCESSORY

1 7/16” Knuckle Joint

SPECIFICATIONS AS50015BJTool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 18.656 in. (473.862 mm)Tool weight 3.75 lb. (1.7 kg)Shipping length 24.656 in. (609.6 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 212: AES Catalog

E-23

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Tear Drop Sub

Ref. Part No. Description 1 AS50014 1 7/16” GO Tear Drop Sub Complete Assy**** 2 AS50029 AES 1 7/16” Tear Drop Sub to 1 3/8” GO Box Assy 3 KIT-50014* Complete Kit Assy 4 KIT-50029** Complete Kit Assy 5 1.3750030 10-32 Cone Nut 6 1.0041 Insulating Washer 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 HOO0095 10-32 x 2.000 Pan Head Screw, S.S. 9 1.4370051 Contact Sub Body10 1.0042 Contact Insulator11 1.0037 Contact Spring12 OOV0211-95 Viton 95 O-Rings: 211 13 HOO0065 Retainer Ring, #5114 LAF00011 Contact Plunger15 1.3750431 Contact Rod 10-32 x 2.12516 1.0086 Beveled Insulating Washer 17 1.3750371 Contact Sub Body18 1.0087A 10-32 Contact Receptacle19 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot20 LAF00128 Insulating Washer***Sold Separately**** AS50014 HA 1 7/16” Tear Drop High Amp

*KIT-50014 Includes: 1.0042 Contact Insulator 1.0037 Contact Spring 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger (2) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2.000 Pan Head Screw, S.S. LAF00128 Insulating Washer Does not include O-Rings

**KIT-50029 Includes: 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0087A 10-32 Contact Receptacle 1.3750030 10-32 Cone Nut 1.3750431 Contact Rod 10-32 x 2.125 Does not include O-Rings

3

5

6

7

8

6

9

10

11

12

2014

13

1

16

2

4

5

6

7

15

18

17

1 3/16” -12 UN-2B

1 3/16” -12 UN-2A

1 3/16” -12 UN-2A

19

Page 213: AES Catalog

E-24

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Tear Drop Sub

SPECIFICATIONS AS50029 Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 2.562 in. (65.675 mm)Tool weight 1 lb. (0.454 kg)Shipping length 8.562 in. (217.4748 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS50014 Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 1.0 in. (25.4 mm)Tool weight 1 lb. (0.454 kg)Shipping length 6 in. (152.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

AS50014

AS50029

Page 214: AES Catalog

E-25

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Double Pin 1 7/16” GO Double Box

1

3

75

6

8

9

10

11

8

75

6

2

4

16

12

13

14

15

13

12

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

Ref. Part No. Description 1 AS50025 1 7/16” GO Double Pin Assy 2 AS50026 1 7/16” GO Double Box Assy 3 KIT-50025* Complete Kit Assy KIT-40005* Complete Kit Assy 4 KIT-50026** Complete Kit Assy KIT-40022** Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 LAF00128 Insulating Washer 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.0028 Contact Insulator10 1.0037-1 Contact Spring11 1.4370036 Contact Sub Body12 1.0087A 10-32 Contact Receptacle13 1.0086 Beveled Insulating Washer14 LBOO0032 Teflon® Tubing, #4 Thin Wall15 1.3750433 Contact Rod 10-32 x 1.20016 1.4370088 Contact Sub Body

*KIT-50025 / KIT 40005 Includes: 1.0028 Contact Insulator (2) HOO0065 Retainer Ring, #51 (2) LAF00011 Contact Plunger 1.0037-1 Contact Spring (2) LAF00128 Insulating WasherDoes not include O-Rings

**KIT-50026 / KIT 40022 Includes: (2) 1.0086 Beveled Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall (2) 1.0087A 10-32 Contact Receptacle 1.3750433 Contact Rod 10-32 x 1.200Does not include O-Rings

Page 215: AES Catalog

E-26

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Double Pin 1 7/16” GO Double Box

SPECIFICATIONS AS50026Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 5.25 in. (133.35 mm)Tool weight 1.5 lb. (0.68 kg)Shipping length 11.25 in. (285.75 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS50025Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 1.440 in. (36.576 mm)Tool weight 1.25 lb. (0.567 kg)Shipping length 7.440 in. (188.976 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

AS50025

AS50026

Page 216: AES Catalog

E-27

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Double Sealed Tear Drop

Ref. Part No. Description 1 AS50028 1 7/16” GO Double Sealed Tear Drop Complete Assy 2 KIT-50028* Complete Kit Assembly 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.4370111 1 7/16” Contact Sub Body10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 HOO0252 10-32 x 3.000” Pan Head Screw, S.S.12 1.3750030 10-32 Cone Receptacle13 LAF00128 Insulating Washer

*KIT-50028 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750030 10-32 Cone Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0252 10-32 x 3.000” Pan Head Screw, S.S. HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

1

2

3

4 13

6

7

8

9

5

10

6

11

5

12

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

Page 217: AES Catalog

E-28

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Double Sealed Tear Drop

SPECIFICATIONS AS50028Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 1.250 in. (31.75 mm)Tool weight 1.19 lb. (0.54 kg)Shipping length 7.25 in. (184.15 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Double Sealed Tear Drop (1 3/16” - 12 UN)

Page 218: AES Catalog

E-29

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Tear Drop High Amp

Ref. Part No. Description1 AS50014HA 1 7/16 GO Tear Drop Sub High Amp2 1.4370051 1 7/16” Tear Drop Body 3 HOO0065 Retainer Ring 4 2351 Insulator 5 1.0042 Insulator Plunger GO Pin6 1.0041 Insulating Washer 7 OOV0211-95 Viton 95 O-Ring: 2118 LAF00011 Contact Plunger GO Pin 9 1.3750030 Tear Drop Cone Nut 10 PSA112 HI AMP Plunger Spring Assy 11 BOO0032 Teflon Tubing, #4 Thin Wall 12 HOO0095 10-32 Screw 13 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot14 LAF00128 Insulating Washer

2 6

5

7

6

9

12

1

1 3/16” -12 UN-2A

13

6

Page 219: AES Catalog

E-30

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

1 7/16” GO Tear Drop High Amp

SPECIFICATIONS AS50014HA

ADAPTOR

Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 1.0 in. (25.4 mm)Tool weight 1 lb. (0.454 kg)Shipping length 6 in. (152.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

Page 220: AES Catalog

E-31

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” Double Sealed Tear Drop With Adjustment Ring1 7/16” GO Double Pin Sub With Adjustment Ring

Ref. Part No. Description 1 AS50030 1 7/16” Double Sealed Tear Drop w/Adjustment Ring 2 1.4370095 Contact Sub Body 3 AS50031 1 7/16” GO Double Pin Sub w/Adjustment Ring 4 KIT-50030* Complete Kit Assy 5 HOO0096 10-32 x 1 3/4” Pan Head Screw, S.S. 6 KIT-50031* Complete Kit Assy 7 1.0033 Contact Plunger 8 HOO0065 Retainer Ring, #51 9 1.0041 Insulating Washer10 OOV0211-95 Viton 95 O-Rings: 211 11 1.0042 Contact Insulator12 1.0037 Contact Spring13 1.3750081 10-32 Spacer Contact14 1.4370080 1 7/16” Adjustment Ring15 1.4370094 Contact Sub Body16 LBOO0032 Teflon® Tubing, #4 Thin Wall17 1.3750249 Contact Rod 10-32 x 4.62518 1.3750030 10-32 Cone Nut19 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot20 LAF00128 Insulating Washer***Sold Separately

*KIT-50030 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut 1.3750249 Contact Rod 10-32 x 4.625 1.3750081 10-32 Spacer Contact LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

*KIT-50031 Includes: (2) LAF00011 Contact Plunger (2) 1.0037 Contact Spring (2) 1.0041 Insulating Washer (2) 1.0042 Contact Insulator 1.3750081 10-32 Spacer Contact LBOO0032 Teflon® Tubing, #4 Thin Wall (2) HOO0065 Retainer Ring, #51 HOO0096 10-32 x 1 3/4” Pan Head Screw, S.S. LAF00128 Insulating WasherDoes not include O-Rings

1

14

15

87

9

10

11

12

13

9

16

17

10

9

18

4

6

3

14

2

10

10

7

8

20

11

12

9

16

5

9

13

20

8

7

11

12

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

19

Page 221: AES Catalog

E-32

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” Double Sealed Tear Drop With Adjustment Ring1 7/16” GO Double Pin Sub With Adjustment Ring

SPECIFICATIONS AS50031Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 2.812 in. (71.42 mm)Tool weight 1.75 lbs. (0.79 kg)Shipping length 8.812 in. (223.8248 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS50030Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 2.875 in. (73.025 mm)Tool weight 1.9 lbs. (0.86 kg)Shipping length 8.875 in. (225.425 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Double Sealed Tear Drop Male (1 3/16” - 12 UN)

AS50030

AS50031

Page 222: AES Catalog

E-33

COMPONENTS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Pin To 1” GO Box 1 7/16” GO Box To 1” GO Pin Ref. Part No. Description 1 AS50001 1 7/16” GO Pin to 1” GO Box Assy 2 AS50007 1 7/16” GO Box to 1” GO Pin Assy 3 KIT-50001* Complete Kit Assy 4 KIT-50007* Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 1.0041 Insulating Washer 8 OOV0211-95 Viton 95 O-Ring: 211 9 1.0042 Contact Insulator10 1.0037 Contact Spring11 LBOO0032 Teflon® Tubing, #4 Thin Wall12 HOO0099 10-32 x 7/8” Pan Head Screw, S.S.13 1.0086 Beveled Insulating Washer14 1.0087A 10-32 Contact Receptacle15 1.0066 Contact Sub Body16 OOV0115-95 Viton 95 O-Ring: 115 17 HOO0195 10-32 x 2 3/4” Round Head Screw, S.S.18 1.3750078 Contact Sub Body19 1.0087B 10-32 Contact Receptacle20 LAF00128 Insulating Washer

*KIT-50001 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring 1.0042 Contact Insulator 1.0086 Beveled Insulating Washer 1.0087B 10-32 Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0099 10-32 x 7/8” Pan Head Screw, S.S. 1.0041 Insulating Washer HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

*KIT-50007 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring 1.0042 Contact Insulator 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0041 Insulating Washer HOO0065 Retainer Ring HOO0195 10-32 x 2 3/4” Round Head Screw, S.S. LAF00128 Insulating WasherDoes not include O-Rings

1

3

5

620

8

9

10

7

11

12

13

19

15

2

4

16

9

10

7

11

17

18

13

14

5

6

20

13/16” - 16 UN-2A

13/16” - 16 UN-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

Page 223: AES Catalog

E-34

SPECIFICATIONS

<< Return to Section E Menu << Return to Main Menu

ADAPTOR

1 7/16” GO Pin To 1” GO Box 1 7/16” GO Box To 1” GO Pin

SPECIFICATIONS AS50007Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 5.325 in. (135.255 mm)Tool weight 2 lbs. (0.907 kg)Shipping length 11.325 in. (287.655 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (13/16” - 16 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS50001Tool diameter (O.D.) 1.437 in. (36.513 mm)Tool length 3.69 in. (25.4 mm)Tool weight 1 lb. (0.454 kg)Shipping length 9.69 in. (246.126 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (13/16” - 16 UN)

AS50001

AS50007

Page 224: AES Catalog
Page 225: AES Catalog

<< Return to Main Menu

SECTION F

1 1/2” - 1 11/16”Table of Contents - 1 1/2” - 1 11/16”

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

PAGE TOOLCABLE HEADSF-1 1 11/16” Cable Head Assembly (Cone & Washer)F-3 1 11/16” Cable Head Assembly (Clamp Ring) F-5 1 11/16” GO Split Cable Head

SINKER BARSF-7 1 11/16”x5’ Steel Sinker Bar Assembly 1 11/16”x5’ Tungsten Sinker Bar Assembly 1 11/16”x7’ Tungsten Sinker Bar Assembly 1 11/16”x5’ Lead Sinker Bar Assembly 1 11/16” x7’ Lead Sinker Bar Assembly

CASING COLLAR LOCATORSF-9 1 5/8” Casing Collar Locator Assembly (G) F-11 1 5/8” Casing Collar Locator Assembly (NG)F-13 1 11/16” Casing Collar Locator (G)

FREE POINT TOOLS & ACCESSORIESF-15 1 5/8” x 16 Stroke Free Point Complete Assembly 1 5/8” Combination Diode Complete Assembly 1 5/8” x 16 Stroke Free Point Complete Assembly w/ Magnet SectionsF-17 1 5/8” Slack Joint Assembly (16” Stroke) F-19 1 5/8” Upper & Lower Bow Spring AssemblyF-21 1 5/8” Casing Bow Spring AssemblyF-23 1 5/8” High Pressure Bow SpringF-25 1 5/8” High Pressure Casing Bow SpringF-27 1 5/8” AES Free Point Upper Magnet Section 1 5/8” AES Free Point Lower Magnet Section 1 5/8” AES Free Point Magnet Tool ExtensionF-29 1 5/8” Sensor Section (Boot)F-31 1 5/8” Grounded Bull PlugF-33 1 5/8” Combination Diode Complete AssemblyF-35 1 5/8” Shot Rod Hanger Assembly (3/8” Rod)F-37 1 5/8” High Pressure Free Point ToolF-39 1 5/8” High Pressure Slack Joint (36” Stroke)F-41 1 5/8” Sensor Section (Piston) HP F-43 1 5/8” High Pressure Grounded Bull Plug AssemblyF-45 1 5/8” High Pressure Comb Diode Sub

DECENTRALIZERS & CENTRALIZERSF-47 1 9/16” Magnetic Decentralizer (Channel)F-49 1 9/16” Bottom Decentralizer (Button) F-51 1 9/16” Bottom Decentralizer (Channel) 1 11/16” Bottom Decentralizer (Channel)F-53 1 11/16” Magnetic Decentralizer (Channel)

F-55 1 11/16” Magnetic Decentralizer (Button)F-57 1 11/16” GO Box to Double Sealed Tear Drop Magnetic Decentralizer (Channel)F-59 1 11/16” Spring Centralizer F-61 1 11/16” Roller Centralizer F-63 1 9/16” Lower Decentralizer Adaptor Assembly

KNUCKLE JOINTS, SWIVELS, SKATES & SHOCK SUBSF-65 1 11/16” OTL Go Knuckle Joint AssemblyF-67 1 11/16” Knuckle Joint Complete AssemblyF-69 1 11/16” Conductor Swivel Complete AssemblyF-71 1 1⁄2” Wireline Skate, 1.71” Drift F-73 1 9/16” Wireline Skate, 1.81” DriftF-75 1 5/8” Wireline Skate, 1.875” Drift F-77 1 11/16” Shock Absorber Sub Complete Assembly

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBSF-79 1 11/16” GO Tear Drop Sub to 1 3/8” GO Box Assembly 1 11/16” GO Tear Drop Sub AssemblyF-81 1 11/16” GO Double Box Assembly 1 11/16” Go Double Pin AssemblyF-83 1 11/16” Go Box/Tear Drop w/ Pressure Connection and Ground Screw F-85 1 11/16” GO Pin/Tear Drop w/Pressure Connection and Ground ScrewF-87 1 1⁄2” GO Low Pressure Firing Sub Assembly 1 1⁄2” GO High Pressure Firing Sub AssemblyF-89 1 11/16” Go Firing Sub AssemblyF-91 1 1⁄2” GO Firing Sub to Atlas Sub Assembly F-93 1 9/16” RTG Bull Plug Assembly 1 9/16” Lower Decentralizer Adaptor Assembly 1 9/16” Lower Blast Sub 1 9/16” RTG Tandem Sub Assembly 1 9/16” RTG Bottom Sub Adaptor Assembly 1 9/16” RTG Top Sub AssemblyF-95 1 11/16” Schlumberger Pin to 1 3/8” Go Box AssemblyF-97 1 11/16” Schlumberger Box to 1 3/8” GO Pin Assembly 1 11/16” Schlumberger Pin to 1 3/8” GO Pin AssemblyF-99 3⁄4” Sucker Rod Pin to 1 3/8” GO Pin Assembly 3⁄4” Sucker Rod Box to 1 3/8” GO Pin Assembly 3⁄4” Sucker Rod Box to 1 3/8” GO Pin AssemblyF-101 1 11/16” Knuckle Joint Assembly Clvs GO High OffsetF-103 1 11/16” x 1’ Pump Down Sub Swab Mandrel

Page 226: AES Catalog

COMPONENTS

F-1 << Return to Section F Menu << Return to Main Menu

CABLE HEAD

1 11/16” Cable Head Assembly (Cone & Washer)

Ref. Part No. Description 1 AS60059** 1 11/16” Cable Head Complete Assy (Cone & washer) 2 1.6870269** 1 11/16” Fishing Neck 3 1.4370047** Cable Head Cone 4 1.4370082 Cable Head Washer 5 1.6870185 1 11/16” Cablehead Sleeve 6 AS60037 1 11/16” Tear Drop Sub Assy 7 KIT-50014* Complete Kit Assy 8 1.3750068 1 3/8” Thread Protector, Pin (Not Shown) 9 BOO0103-1/6*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot **Specify line size when ordering.***Sold Separately

*KIT-50014 Includes: 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger (3) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2” Pan Head Screw, S.S.Does not include O-Rings

1

2

3

5

4

1 3/16”-12 UN-2A

6

8

1 3/16”-12 UN-LH (Left Hand)

9

Page 227: AES Catalog

SPECIFICATIONS

F-2<< Return to Section F Menu << Return to Main Menu

CABLE HEAD

SPECIFICATIONS AS60059Tool diameter (O.D.) 1.687 in (42.85 mm)Tool length 12.52 in (318.008 mm)Tool weight 5.56 lbs. (2.52 kg) Shipping length 18.52 in. (470.408 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection GO TYPE Male (1 3/16” - 12 UN)

1 11/16” Cable Head Assembly (Cone & Washer)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

Page 228: AES Catalog

COMPONENTS

F-3 << Return to Section F Menu << Return to Main Menu

1 11/16” Cable Head Assembly (Clamp Ring)

Ref. Part No. Description 1 AS60036* 1 11/16” Cable Head Complete Assy (Clamp ring) 2 1.4370016 Rope Socket Body for 7/32” Line 3 HOO0346 3/8 - 24 x 1/2” Socket Set Screw, Alloy 4 1.4370009 Clamp Ring for 7/32” Rope Socket Body 5 1.6870125 1 11/16” Cable Head Body 6 AS60037 1 11/16” Tear Drop Assy 7 EXP015 1 11/16” Rope Socket Tool 8 KIT-50014** Complete Kit Assy 9 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)10 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot *Specify line size when ordering.***Sold Separately

**KIT-50014 Includes: 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger (3) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2” Pan Head Screw, S.S.Does not include O-Rings

6

1

4

2

3

5

9

1 3/16”-12 UN-2A

7

10

CABLE HEAD

Page 229: AES Catalog

SPECIFICATIONS

F-4<< Return to Section F Menu << Return to Main Menu

CABLE HEAD

1 11/16” Cable Head Assembly (Clamp Ring)

Tool diameter (O.D.) 1.687 in (42.85 mm)Tool length 12.33 in (313.18 mm)Tool weight 5.64 lbs. (2.56 kg) Shipping length 18.33 in. (465.582 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection GO TYPE Male (1 3/16” - 12 UN)

DESCRIPTION The cable head plays an integral role in wireline deployment by providing mechanical an electrical connections from the wireline cable to the tool string. The built in weak point holds the weight of the tool string and enable the wireline cable to be released from the cable head should the tool string become stuck downhole. In this event, the standard slickline fishing head design allows for quick and easy fishing operation, reducing NPT.

FEATURES • Compatible with all types of armored wireline• Standard slickline fishing head• H2S resistance model available• Customization available for specific applications

SPECIFICATIONS AS60036

Page 230: AES Catalog

COMPONENTS

F-5 << Return to Section F Menu << Return to Main Menu

1 11/16” GO Split Cable Head

Ref. Part No. Description1 AS60081 1 11/16” GO Split Cable Head Complete Assembly2 2671** 1 11/16” Fishing Neck 3 2672-7/16 Cable Head Sub GO SPLT 4 1.6870185 Cable Head Cone 5 1.4370047** Cable Head Washer 6 1.470082 1 11/16” Cablehead Sleeve 7 AS60037 1 11/16” Tear Drop Sub Assy 8 KIT-50014 Complete Kit Assy 9 00V0211-95 Viton 95 O-Rings: 21110 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot **Specify line size when ordering.***Sold Separately

Optional: 11 AS6003OTL 5’ OTL Tungsten Sinker Bar AS6004OTL 7’ OTL Tungsten Sinker Bar

*KIT-50014 Includes: 1.0037 Contact Spring 1.0042 Contact Insulator 1.3750030 10-32 Cone Nut LAF00011 Contact Plunger (3) 1.0041 Insulating Washer LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 HOO0095 10-32 x 2” Pan Head Screw, S.S. Does not include O-Rings

6

2

11

7

1 3/16”-12 UN-2A

Left Handed

1 3/16”-12 UN-2A

8

1

3

5

9

1 3/16”-12 UN-2B LH

10

4

CABLE HEAD

Page 231: AES Catalog

SPECIFICATIONS

F-6<< Return to Section F Menu << Return to Main Menu

CABLE HEAD

1 11/16” GO Split Cable Head

SPECIFICATIONS AS60004OTLTool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 72 in. (1828.8 mm) Tool weight 83 lbs. (37.65 kg)Shipping length 78 in. (1981.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60003OTLTool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 60 in. (1524 mm) Tool weight 61 lbs. (27.67 kg)Shipping length 66 in. (1676.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60081Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 16.275 in. (413.385 mm) Tool weight 6.8 lbs. (3.08 kg)Shipping length 22.275 in. (565.785 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

AS60081AS60003OTLAS60004OTL

Page 232: AES Catalog

COMPONENTS

F-7 << Return to Section F Menu << Return to Main Menu

SINKER BAR

2

3

4

17

16

6

15

7

8

5 9

10

11

12

14

1 13

16

1-11/16” Sinker Bars Ref. Part No. Description 1 AS60002 1 11/16” X 5’ Steel Sinker Bar Assy AS60003 1 11/16” X 5’ Tungsten Sinker Bar Assy AS60004 1 11/16” X 7’ Tungsten Sinker Bar Assy AS60033 1 11/16” X 5’ Lead Sinker Bar Assy AS60034 1 11/16” X 7’ Lead Sinker Bar Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 OOV0211-95 Viton 95 O-Ring: 211 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 Contact Nut 9 LBOO0032 Teflon® Tubing, #4 Thin Wall10 1.3750296 ASSY Contact Thru Rod For 5’ BARS (Plunger Contact) 1.3750184 ASSY Contact Thru Rod For 7’ BARS (Plunger Contact)11 1.0086 Insulating Bevel Washer12 1.0087A Contact Receptacle13 KIT-40004* All 5’ Bars Listed Above (Plunger Contact) KIT-40015** All 7’ Bars Listed Above (Plunger Contact)14 1.3750067 1 3/8” Thread Protector, Box (Not Shown)15 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)16 KIT-40004LR*** Complete Kit Assy (Less Rod)17 LAF00128 Insulating Washer

*KIT-40004 Includes: 1.3750296 ASSY Contact Thru Rod For 5’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)Does not include O-Rings

**KIT-40015 Includes: 1.3750184 ASSY Contact Thru Rod For 7’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal) (See Below)Does not include O-Rings

***KIT-40004LR Includes: LAF00011 Contact Plunger 1.0086 Insulating Bevel Washer 1.3750081 Contact Nut HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

Page 233: AES Catalog

SPECIFICATIONS

F-8<< Return to Section F Menu << Return to Main Menu

SINKER BAR

1-11/16” Sinker Bars

SPECIFICATIONS AS60002 AS60003 Tool diameter (O.D.) 1.687 in. (42.85 mm) 1.687 in. (42.85 mm)Tool length 60 in. (1524 mm) 60 in. (1524 mm)Tool weight 37 lb. (16.78 kg) 58 lb. (26.31 kg)Shipping length 66 in. (1676.4 mm) 66 in. (1676.4 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS60004 AS60033 Tool diameter (O.D.) 1.687 in. (42.85 mm) 1.687 in. (42.85 mm)Tool length 84 in. (2133.6 mm) 60 in. (1524 mm)Tool weight 83 lb. (37.65 kg) 43 lb. (19.50 kg)Shipping length 90 in. (2286 mm) 66 in. (1676.4 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS60034 Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 84 in. (2133.6 mm)Tool weight 61 lb. (27.67 kg)Shipping length 90 in. (2286 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Steel, lead and tungsten models available

Page 234: AES Catalog

COMPONENTS

F-9 << Return to Section F Menu << Return to Main Menu

CASING COLLAR LOCATOR

1 5/8” Casing Collar Locator (Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS60103 1 5/8” Casing Collar Locator Complete Assy (G) 2 1.4370057 Contact Rod 10-32 x 8.750 3 SEM0069 Double Diode 4 1.3750041 CCL Upper Contact 5 HOO0027 6–32 x 1/4” Pan Hd. Screw, Alloy 6 1.4370031 Magnet Retainer 7 PSA043UN Grounded Coil (Universal) 8 1.4370028 Retainer Insulator 9 HOO0058 10-32 Hex Nut, S.S.10 1.3750073-1 CCL Magnet11 HOO0004 4–40 x 3/16” Pan Hd. Screw, Alloy12 HOO0126 Ground Spring13 LBOO0032 Teflon® Tubing, #4 Thin Wall14 1.4370029 Lower CCL Insulator15 1.4370026 Lower CCL Contact16 HOO0250 Retainer Ring, #10617 3099 1 5/8” CCL Housing18 AS50008-1 CCL Coil & Magnet Assy (G)19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)20 KIT-50008* Complete Kit Assy

*KIT-50008 Includes: 1.3750041 CCL Upper Contact HOO0004 4–40 x 1/8” Pan Hd. Screw, S.S. 1.4370028 Retainer Insulator 1.4370026 Lower CCL Insulator 1.4370057 Contact Rod 10-32 x 8.750 SEM0069 Double Diode LBOO0032 Teflon® Tubing, #4 Thin Wall 1.4370028 Retainer Insulator 1.4370029 Lower CCL Insulator HOO0126 Ground SpringDoes not include O-Rings

1

20

16

4

98

3

5

19

6

10

17

13

18

7

11

12

2

10

14

15

16

19 1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

Page 235: AES Catalog

SPECIFICATIONS

F-10<< Return to Section F Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS60103

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with free point back off

Tool diameter (O.D.) 1 5/8 in. (41.275 mm)Tool length 14.147 in. (359.4 mm)Tool weight 7.1 lbs (3.221 kg)Shipping length 17.147 in. (435.5 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 28,800 -32,400 OhmsTop connection GO Type Female (1 3/16-12 UN) Bottom connection GO Type Female (1 3/16-12 UN)Sensor measure point 6.421 in. (163.1 mm) from bottom of tool

1 5/8” Casing Collar Locator (Grounded)

The 1 5/8” Casing Collar Locator Free Point (Grounded) detectscasing collars and perforations in tubing or casing.

Page 236: AES Catalog

COMPONENTS

F-11 << Return to Section F Menu << Return to Main Menu

1 5/8” Casing Collar Locator (Non-Grounded)

1

5

10

12

2

13

6

14

15

16

19

7

98

3

16

19

5

18

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded1 AS60102 1 5/8” Casing Collar Locator Complete Assy (NG)2 1.4370057 Contact Rod 10-32 x 8.7503 SEM0069 Double Diode4 1.3750041 CCL Upper Contact5 HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S.6 1.4370031 Magnet Retainer7 PSA043UN Grounded Coil (Universal)8 1.4370028 Retainer Insulator9 HOO0058 10-32 Hex Nut, S.S.10 1.3750073-1 CCL Magnet11 HOO0004 4–40 x 3/16” Pan Hd. Screw, S.S.12 HOO0126 Ground Spring13 LB000032 Teflon® Tubing, #4 Thin Wall14 1.4370029 Lower CCL Insulator15 1.3750041-1 1-7/16 Lower Contact16 HOO0250 Retainer Ring, #10617 3099 1 5/8” CCL Housing18 AS50006-1 CCL Coil & Magnet Assy (NG)19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)

KIT-50006 Includes: (2) HOO0027 6–32 x 1/4” Pan Hd. Screw, S.S. 1.4370028 Retainer Insulator 1.3750041 CCL Upper Contact 1.3750041-1 1-7/16 Lower Contact 1.4370029 Lower CCL Insulator 1.4370057 Contact Rod 10-32 x 8.750 SEM0069 Double Diode LBOO0032 Teflon® Tubing, #4 Thin Wall 1.4370028 Retainer InsulatorDoes not include O-Rings

10

1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

4

17

11

CASING COLLAR LOCATOR

Page 237: AES Catalog

SPECIFICATIONS

F-12<< Return to Section F Menu << Return to Main Menu

CASING COLLAR LOCATOR

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with free point back off

1 5/8” Casing Collar Locator (Non-Grounded)

The 1 5/8” Casing Collar Locator Free Point (Non-Grounded) detectscasing collars and perforations in tubing or casing.

SPECIFICATIONS AS60102Tool diameter (O.D.) 1 5/8 in. (41.275 mm)Tool length 14.147 in. (359.4 mm)Tool weight 7.1 lbs (3.221 kg)Shipping length 17.147 in. (435.5 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 28,800 - 32,400 OhmsTop connection GO Type Female (1 3/16-12 UN) Bottom connection GO Type Female (1 3/16-12 UN)Sensor measure point 6.421 in. (163.1 mm) from bottom of tool

Page 238: AES Catalog

COMPONENTS

F-13 << Return to Section F Menu << Return to Main Menu

1 11/16” Casing Collar Locator (Grounded) Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS60005 1 11/16” Casing Collar Locator Complete Assy (G) 2 PSA045 1 11/16” Coil Assy (G) 3 HOO0004 4–48 x 1/8” Pan Hd. Screw, S.S. 4 HOO0126SS Ground Spring 5 OOV0316-95 Viton 95 O-Rings: 316 6 1.3750073-1 Collar Locator Magnet 7 HOO0548 1/4-28 x 2 1/4” Socket Head Cap Screw, Alloy 8 1.6870015 1 11/16” CCL Upper Pole Piece 9 1.6870016 CCL End Contact Insulator10 HOO0085 6–32 x 5/16” Socket Set Screw, Alloy11 1.6870019 CCL Contact Receptacle12 1.6870186 1 11/16” CCL Lower Pole Piece13 1.6870187 Insulating Washer14 1.6870188 CCL Contact Receptacle15 1.6870189 Plunger Insulator16 SEM0069 Double Diode17 1.6870190 Brass Plunger18 1.6870191 Plunger Washer19 HOO0254 Retainer Ring, #6220 HOO0065 Retainer Ring, #5121 1.0041 Insulating Washer22 LAF00011 Contact Plunger23 1.0037 Contact Spring24 1.0042 Plunger Insulator25 OOV0217-95 Viton 95 O-Rings: 217 26 HOO0139 10–32 x 1” Pan Hd. Screw, S.S.27 1.0086 Beveled Insulating Washer28 1.0087A Contact Receptacle29 1.6870018 CCL Upper Adapter Sub30 1.6870192 CCL Lower Adapter Sub31 1.6870013 1 11/16” CCL Housing32 LBOO0032 Teflon® Tubing, #4 Thin Wall33 HOO0141 6–32 x 1/8” Socket Set Screw, Alloy34 AS60005-2 1 11/16” CCL Top Sub Assy.35 AS60005-1 1 11/16” CCL Coil & Magnet Assy (G)36 1.3750067 1 3/8” Thread Protector, Box (Not Shown)37 HOO0129 Roll Pin, 3/32 x 3/8”, S.S.38 KIT-60005* Top Sub Kit Assy39 KIT-60005-2** Complete Kit Assy

1

1 3/16” - 12UN

34

1 3/16” - 12UN

2

35

28

27

26

3221

2423

20

22

5

11

9

6

4

3

29

25

21

33

10

8

7

6

37

7

12

13

14

16

18

17

36

30

19

25

15

33

5

31

36

* KIT-60005 Includes: 1.6870019 CCL Contact Receptacle 1.6870187 Insulating Washer 1.6870188 CCL Contact Receptacle 1.6870189 Plunger Insulator SEM0069 Double Diode 1.6870190 Brass Plunger HOO0085 6–32 x 5/16” Socket Set Screw, Alloy HOO0254 Retainer Ring, #62 1.6870016 CCL End Contact Insulator 1.6870191 Plunger Washer HOO0004 4–48 x 1/8” Pan Hd. Screw, S.S. HOO0126SS Ground Spring(4) OOV0316-95 O-Rings: 316 V95

**KIT-60005-2 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0087A Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0139 10–32 x 1” Pan Hd. Screw, S.S. 1.0042 Plunger Insulator 1.0086 Beveled Insulating Washer HOO0065 Retainer Ring, #51Does not include O-Rings

CASING COLLAR LOCATOR

Page 239: AES Catalog

SPECIFICATIONS

F-14<< Return to Section F Menu << Return to Main Menu

CASING COLLAR LOATOR

SPECIFICATIONS AS60005

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

Tool diameter (O.D.) 1 11/16 in. (43 mm)Tool length 20.7 in. (526 mm)Tool weight 10.7 lbs (4.8 kg)Shipping length 23.7 in. (602 mm) Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 1,900 - 2,100 OhmsTop connection GO Type Female (1 3/16-12 UN) Bottom connection GO Type Female (1 3/16-12 UN)Sensor measure point 10.25 in. (260.35 mm) from bottom of tool

1 11/16” Casing Collar Locator (Grounded)

The 1 11/16” Shooting Casing Collar Locator (Grounded) casing collars and perforations in tubing or casing.

Page 240: AES Catalog

COMPONENTS

F-15 << Return to Section F Menu << Return to Main Menu

FREE POINT

1 5/8” Free Point Assembly

2

3

29

3

11

10

1 1

1 5/8” Free Point Magnet Tool Assembly

Ref. Part No. Description 13 AS600FPM-16 1 5/8” Free Point Tool 16” Stroke with Magnets 1 AS60094-16 1 5/8” AES Slack Joint-16” Stroke Complete Assy 3 AS60092 1 5/8” AES Sensor Section Complete Assy 5 AS60098 1 5/8” Shot Rod Hanger 7 1.3750131 Shot Rod 3/8 X 5ft 1 & 1 3/8 8 AS60099 1 5/8” Bull Plug Shot Rod 9 AS60096 1 5/8” Upper Magnet Section Assy10 AS60097 1 5/8” Lower Magnet Section Assy11 AS60095 1 5/8” Magnet Extension Assy14 AS60104 1 5/8” Shot Rod Assy

OPTIONS: AS60092PC Sensor Section - Piston Compensation AS60094-24 Slack Joint: 24” AS60094-36 Slack Joint: 36”

5

6

4

Ref. Part No. Description 12 AS600FP-16 1 5/8” Free Point Tool 16” Stroke 1 AS60094-16 1 5/8” AES Slack Joint-16” Stroke Complete Assy 2 AS60093 1 5/8” AES Upper & Lower Bow Spring Complete Assy 3 AS60092 1 5/8” AES Sensor Section Complete Assy (Boot) 4 AS60100 1 5/8” Grounded Bull Plug 5 AS60101 1 5/8” Combination Diode Sub 6 AS60104 1 5/8” Shot Rod Hanger 7 1.3750131 Shot Rod 3/8 X 5ft 1 & 1 3/8 8 AS60099 1 5/8” Bull Plug Shot Rod14 AS60104 1 5/8” Shot Rod Assy

OPTIONS: AS60092PC Sensor Section - Piston Compensation AS60093C Bow Springs: Casing AS60094-24 Slack Joint: 24” AS60094-36 Slack Joint: 36”

12

13

7

6

8

7

14

14

8

Page 241: AES Catalog

SPECIFICATIONS

F-16<< Return to Section F Menu << Return to Main Menu

FREE POINT

1 5/8” Free Point Assembly

SPECIFICATION AS600FPM-16 (Magnet)Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length (closed/open) 110.750 - 126.25 in. (2813.05 - 3206.75 mm)Tool weight 40 in. (18.14 kg) Shipping length (closed) 116.750 in. (2965.45 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1 3/16-12 UN)

SPECIFICATIONS AS600FP-16 (Spring)Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length (closed/open) 125.39 - 140.89 in. (3184.91 - 3578.61 mm)Tool weight 50 lbs (22.68 kg)Shipping length (closed) 131.39 in. (3337.306 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection GO Type Male (1 3/16-12 UN) Bottom connection GO Type Female (1 3/16-12 UN)

DESCRIPTION The Free Point Indicator is an electromechanical assembly designed to accurately mea-sure torque or stretch in harsh conditions. The basic Free Point tool assembly consists of bow spring or magnet, upper and lower anchors, and a snsor section to determine stuck point. Additional components that can be run with the Free Point tool assembly are: sinker bars to overcome the holding ability of the anchors, a collar locator (CCL) to determine depth and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement.

FEATURES • A wide range of tools are available for operations inside large diameter casings and small diameter pipe sizes and restriction. • Most Free Point tools can be run simultaneously with explosive string shot assemblies.

AS600FP-16 AS600FPM-16

Page 242: AES Catalog

COMPONENTS

F-17 << Return to Section F Menu << Return to Main Menu

1 5/8” Slack Joint

54

2

3

6

29

4

9

4

12

27

10

7

13

14

114

15

16

12

27

17

26

20

18

9

1

21

23

24

25

28

22

11

8

16

19

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

FREE POINT

Ref. Part No. Description 1 AS60094-16* 1 5/8” AES Slack Joint Assy (16” Stroke) 2 LAF00011 Contact Plunger 3 469722 HOO0065 Retainer Ring, #51 4 109931 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 109933 1.0042 Contact Insulator 7 109934 1.0037 Contact Spring 8 1.6250092 1 5/8” Slack Joint Top Sub 9 102109545 LBOO0032 Teflon® Tubing, #4 Thin Wall10 HOO0095 10-32 x 2” Pan Head Screw, S.S.11 1.3750139 1 3/8” Slack Joint Cone Nut 12 HOO0141 6-32 x 1/8” Socket Set Screw, Alloy 13 103841 WIR1040-1.375-1 Slack Joint Wire 16” Stroke 14 1.6250094-16 1 5/8” Slack Joint Housing 15 1.6250095 1 5/8” Slack Joint Inner Mandrel End Connection16 OOV0111-95 Viton 95 O-Rings: 111 17 HOO0430 1/4-20 x 3/16” Socket Set Screw, S.S. 18 1.3750447-16 Contact Rod 10-32 x 25.500 19 HOO0098 1/8” x 1” Roll Pin 20 142367 HOO0170 6-32 x 1/4” Button Head Cap Screw, Alloy21 101762190 1.3750004-16 Slack Joint Inner Mandrel 22 HOO0091 1/4 - 20 x 3/16” Socket Set Screw, Alloy23 1.6250091 1 5/8” Slack Joint Inner Mandrel Connector Sub24 1.3750029 Female Contact Insulator 25 1.3750173 10-32 Spacer Contact 26 1.3750185 Slack Joint Key27 HOO0094 6-32 x 3/16” Pan Head Screw, S.S.28 1.3750067 1 3/8” Thread Protector, Box (Not Shown)29 1.3750068 1 3/8” Thread Protector, Pin (Not Shown) 30 LAF00128 Insulating Washer

*Also available in 24” and 36” stroke.

KIT-60094-16 Includes: LAF00011 Contact Plunger 1.3750173 10-32 Spacer Contact 1.3750447-16 Contact Rod 10-32 x 25.500 469722 HOO0065 Retainer Ring, #51 109934 1.0037 Contact Spring 109931 1.0041 Insulating Washer 109933 1.0042 Contact Insulator 1.3750029 Female Contact Insulator 1.3750139 1 3/8” Slack Joint Cone Nut 102109545 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0095 10-32 x 2” Pan Head Screw, S.S. LAF00128 Insulating WasherDoes not include O-Rings.

** Also available: KIT - 60094-24 KIT - 60019-36

Page 243: AES Catalog

SPECIFICATIONS

F-18<< Return to Section F Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS60094-16Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length (closed/open) 39.15 - 54.65 in. (918.2 - 1388.11 mm)Tool weight 16 lbs. (7.26 kg)Shipping length (closed) 45.15 in. ( 1146.81 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male ( 1 3/16” - 12 UN) Bottom connection Go TYPE Female ( 1 3/16” - 12 UN)

1 5/8” Slack Joint

DESCRIPTION The slack joint section of the Free Point Indicator tool relieves weight above the tool as-sembly when the tool is at the correct depth for making a measurement.

FEATURES • Wild range of tools are abailable for operations inside large diameter casings and small diameter pipe sizes and restrictions. • Stroke lengths available in 16”, 24” and 36”

Page 244: AES Catalog

COMPONENTS

F-19 << Return to Section F Menu << Return to Main Menu

1 5/8” Upper & Lower Bow Spring

Ref. Part No. Description 1 AS60093 1 5/8” Upper & Lower Bow Spring Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact Nut 9 OOV0111-95 Viton 95 O-Rings: 111 10 1.6250088 1 5/8” Upper Mandrel Connector Sub 11 HOO0091 1/4” - 20 x 3/16” Socket Set Screw, Alloy 12 1.3750009 Adjustment Nut 13 1.3750059 Washer 14 1.3750055-4 Compression Spring 15 1.3750008 1 5/8” Bow Spring Mandrel 16 1.6250090 1 5/8” Bow Spring Collar 17 HOO0048 10-32 x 3/16” Button Head Cap, Alloy 18 OMF0002 Bow Spring-Slick OMF0002-1 Bow Spring-Carbide 19 1.3750011 Adjustment Sleeve 20 1.3750475 Adjustment Collar 21 LBOO0032 Teflon® Tubing, #4 Thin Wall 22 1.3750441 Contact Rod 10-32 x 26 23 1.6250089 1 5/8” Bow Spring Anchor 24 1.3750029 Contact Insulator 25 1.3750173 10-32 Spacer 26 KIT-60093* Complete Kit Assy 27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)29 LAF00128 Insulating Washer

*KIT-60093 Includes: 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750029 Contact Insulator 1.3750081 10-32 Contact Nut 1.3750441 Contact Rod 10-32 x 26.000 HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.3750173 10-32 Spacer LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings.

1

5

29

2

76

8

9

11

13

12

4

3

28

15

1316

17

18

19

20

11

21

2217

9

2324

25

27

10

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

14

FREE POINT

Page 245: AES Catalog

SPECIFICATIONS

F-20<< Return to Section F Menu << Return to Main Menu

1 5/8” Upper & Lower Bow Spring

SPECIFICATIONS AS60093Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 28.25 in. (717.55 mm)Tool weight 12 lbs. (5.44 kg)Shipping length 34.25 in. (869.95 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male ( 1 3/16” - 12 UN) Bottom connection Go TYPE Female ( 1 3/16” - 12 UN)Min I.D. 1.75 in. (44.45 mm)Max I.D. 5.625 in. (142.875 mm)

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

FREE POINT

Page 246: AES Catalog

COMPONENTS

F-21 << Return to Section F Menu << Return to Main Menu

1 5/8” Casing Bow Spring Section

Ref. Part No. Description 1 AS60093C 1 5/8” Casing Bow Spring Section 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact Nut 9 OOV0111-95 Viton 95 O-Rings: 111 10 1.6250088 1 5/8” Upper Mandrel Connector Sub 11 HOO0091 1/4” - 20 x 3/16” Socket Set Screw, Alloy 12 1.3750009 Adjustment Nut 13 1.3750059 Washer 14 1.3750055-4 Compression Spring 15 1.3750077 1 5/8” Freepoint Casing Bow Spring Mandrel 16 1.6250090 1 5/8” Bow Spring Collar 17 HOO0048 10-32 x 3/16” Button Head Cap, Alloy 18 OMF0004 Bow Spring-Slick OMF0004-1 Bow Spring-Carbide 19 1.3750011 Adjustment Sleeve 20 1.3750475 Adjustment Collar 21 LBOO0032 Teflon® Tubing, #4 Thin Wall 22 1.3750468 Contact Rod 10-32 x 39 23 1.6250089 1 5/8” Bow Spring Anchor 24 1.3750029 Contact Insulator 25 1.3750173 10-32 Spacer 26 KIT-60093* Complete Kit Assy 27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)29 LAF00128 Inaulating Washer

*KIT-60093 Includes: 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750029 Contact Insulator 1.3750081 10-32 Contact Nut 1.3750441 Contact Rod 10-32 x 26.000 HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.3750173 10-32 Spacer LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings.

1

5

29

2

76

8

9

11

13

12

4

3

28

15

1316

17

18

19

20

11

21

2217

9

2324

25

27

10

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

14

FREE POINT

Page 247: AES Catalog

SPECIFICATIONS

F-22<< Return to Section F Menu << Return to Main Menu

FREE POINT

1 5/8” Casing Bow Spring Section

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

SPECIFICATIONS AS60093CTool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 28.25 in. (717.55 mm)Tool weight 12 lbs. (5.44 kg)Shipping length 34.25 in. (869.95 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male ( 1 3/16” - 12 UN) Bottom connection Go TYPE Female ( 1 3/16” - 12 UN)Min I.D. 1.75 in. (44.45 mm)Max I.D. 5.625 in. (142.875 mm)

Page 248: AES Catalog

COMPONENTS

F-23 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Bow Spring

Ref. Part No. Description 1 AS60093HP 1 5/8” Bow Spring HP 2 LAF00011 Contact Plunger 3 1.0041-2 Insulator 4 HOO0254 Retainer Ring, #62 5 1.0042-3 Contact Insulator 6 1.3750081 Contact 7 1.0037 Contact Spring 8 OOV0217-95 Viton 95 O-Rings: 217 9 OOB0217 217 Backup Rings10 1.6250088HP Upper Mandrel Connector Sub11 OOV0111-95 Viton 95 O-Rings: 111 12 OOB0111 111 Backup Rings13 HOO0091 1/4” -20 x 3/16” Socket Set Screw, Alloy14 1.3750009 Adjustment Nut 15 1.3750059 Washer 16 1.3750055-4 Compression Spring17 1.6250090 Bow Spring Collar18 HOO0048 10-32 x 3/16” Button Head Screw, Alloy19 OMF0002 Bow Spring-Slick 20 OMF0002-1 Bow Spring-Carbide21 1.3750011 Adjustment Sleeve 22 1.3750475 Adjustment Collar 23 1.3750008HP Bow Spring Mandrel24 1.3750441 10-32 Contact Rod 26.000” Long25 LBOO0032 Teflon® Tubing, #4 Thin Wall26 1.6250089HP Bow Spring Anchor27 1.3750029 Contact Insulator 28 1.3750173 10-32 Contact 29 KIT-60093HP* Contact Kit30 1.6250115 Thread Protector, Pin (Not Shown)31 1.6250116 Thread Protector, Box (Not Shown)

*KIT-60093HP Includes: 1.3750029 Contact Insulator LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041-2 Insulator 1.0042-3 Contact Insulator 1.3750081 Contact 1.3750173 10-32 Contact LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0254 Retainer Ring, #62Does not include O-Rings

22

23

21

18

15

17

16

1514

1310

37

5

1

23

24

25

18

26

2728

31

42

930

8

1211

2019

1 3/8”-12 STUB ACME - 2G

1 3/8”-12 STUB ACME - 2G

29

11 12

3

6

FREE POINT

Page 249: AES Catalog

SPECIFICATIONS

F-24<< Return to Section F Menu << Return to Main Menu

SPECIFICATIONS AS60093HP

1 5/8” High Pressure Bow Spring

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 28.375 in. (720.73 mm) Tool weight Available upon requestShipping length 34.375 in. (873.125 mm)Temperature rating 500°F (260°C)Pressure rating 30000 psi (207 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)Bottom connection HIGH Pressure Female (1 3/8” - 12 STUB ACME)Min/Max I.D. 1.75 in. (44.45 mm) / 5 .625 in. (142.875 mm)

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

FREE POINT

Page 250: AES Catalog

COMPONENTS

F-25 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Casing Bow Spring

Ref. Part No. Description 1 AS60093HPC 1 5/8” Casing Bow Spring HP 2 LAF00011 Contact Plunger 3 1.0041-2 Insulator 4 HOO0254 Retainer Ring, #62 5 1.0042-3 Contact Insulator 6 1.3750081 Contact 7 1.0037 Contact Spring 8 OOV0217-95 Viton 95 O-Rings: 217 9 OOB0217 217 Backup Rings10 1.6250088HP Upper Mandrel Connector Sub11 OOV0111-95 Viton 95 O-Rings: 111 12 OOB0111 111 Backup Rings13 HOO0091 1/4” -20 x 3/16” Socket Set Screw, Alloy14 1.3750009 Adjustment Nut 15 1.3750059 Washer 16 1.3750055-4 Compression Spring17 1.6250090 Bow Spring Collar18 HOO0048 10-32 x 3/16” Button Head Screw, Alloy19 OMF0004 Bow Spring-Slick 20 OMF0004-1 Bow Spring-Carbide 21 1.3750011 Adjustment Sleeve 22 1.3750475 Adjustment Collar 23 1.3750077HP Casing Bow Spring Mandrel24 1.3750468 10-32 Contact Rod 39.000” Long25 LBOO0032 Teflon® Tubing, #4 Thin Wall26 1.6250089HP Bow Spring Anchor 27 1.3750029 Contact Insulator 28 1.3750173 10-32 Contact 29 KIT-60093HP* Contact Kit30 1.6250115 Thread Protector, Pin (Not Shown)31 1.6250116 Thread Protector, Box (Not Shown)

*KIT-60093HPC Includes: 1.3750029 Contact Insulator LAF00011 Plunger 1.0037 Contact Spring (2) 1.0041-2 Insulator 1.0042-3 Contact Insulator 1.3750081 Contact 1.3750173 10-32 Contact LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0254 Retainer Ring, #62 1.3750468 10-32 Contact Rod 39.000” LongDoes not include O-Rings

22

23

21

18

15

17

1514

1310

37

5

1

23

24

25

18

26

2728

31

42

930

8

1211

2019

1 3/8”-12 STUB ACME - 2G

1 3/8”-12 STUB ACME - 2G

29

11 12

3

6

16

FREE POINT

Page 251: AES Catalog

SPECIFICATIONS

F-26<< Return to Section F Menu << Return to Main Menu

FREE POINT

1 5/8” High Pressure Casing Bow Spring

SPECIFICATIONS AS60093HPCTool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 41.375 in. (1050.925 mm) Tool weight 14.5 lbs. (6.58 kg)Shipping length 47.375 in. (1203.325 mm)Temperature rating 500°F (260°C)Pressure rating 30000 psi (145 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)Bottom connection HIGH Pressure Female (1 3/8” - 12 STUB ACME)

DESCRIPTION The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for accurate measurement of stuck pipe.

FEATURES • A wide range of tools are avaiable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

Page 252: AES Catalog

COMPONENTS

F-27 << Return to Section F Menu << Return to Main Menu

1 5/8” Magnet Tools

Ref. Part No. Description 1 AS60096 1 5/8” AES Freepoint Upper Magnet Section 2 AS60097 1 5/8” AES Freepoint Lower Magnet Section 3 AS60095 1 5/8” AES Freepoint Magnet Tool Extension 4 KIT-40085* Complete Kit Assy 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 1.0041 Insulating Washer 8 OOV0211-95 Viton 95 O-Rings: 211 9 1.0042 Contact Insulator10 1.0037 Contact Springs11 1.3750081 10-32 Contact Receptacle12 1.3750479 Contact Rod 10-32 x 11.68713 LBOO0032 Teflon® Tubing, #4 Thin Wall14 1.0086 Beveled Insulating Washer15 1.0087A 10-32 Contact Receptacle16 1.6250096 Magnet Extension Tool Body17 HOO0279 Magnets18 HOO0317 Carbide Pads19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)20 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)21 KIT-40087** Contact Kit Assy22 LAF00128 Insulating Washer

*KIT-40085 Includes: LAF00011 Contact Plunger 1.0037 Contact Springs 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle 1.3750081 10-32 Contact Receptacle 1.3750479 Contact Rod 10-32 x 11.687 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

**KIT-40087 Includes: LAF00011 Contact Plunger 1.0037 Contact Springs 1.0041 Insulating Washer 1.0042 Contact Insulator HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

1

4

17

17

181415

18

18

11

225

68

9

10

7

1 3/16”-12 UN-2A

5

8

3

21

622

9

10

16

1 3/16”-12 UN-2B

7

1 3/16”-12 UN-2A

2

18

20

20

20

19

19

17

18

17

18

8

FREE POINT

Page 253: AES Catalog

SPECIFICATIONS

F-28<< Return to Section F Menu << Return to Main Menu

FREE POINT

1 5/8” Magnet Tools

SPECIFICATIONS AS60097Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 15.1 in. (383.54 mm)Tool weight 9 lbs. (4.08 kg)Shipping length 21.1 in. (535.94 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male ( 1 3/16” - 12 UN)

SPECIFICATIONS AS60096Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 14.1 in. (358.14 mm)Tool weight 8 lbs. (3.63 kg)Shipping length 20.1 in. (510.54 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male ( 1 3/16” - 12 UN) Bottom connection Go TYPE Female ( 1 3/16” - 12 UN)

SPECIFICATIONS AS60095Tool diameter (O.D.) 1.625 in. (41.28 mm)Tool length 14.125 in. (357.78 mm)Tool weight 6 lbs. (2.72 kg)Shipping length 20.125 in. (511.175 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male ( 1 3/16” - 12 UN) Bottom connection Go TYPE Female ( 1 3/16” - 12 UN)

DESCRIPTION The magnet section of the Free Point Indicator tool decentralizes the tool against the side wall of large casings allowing for accurate measurement of stact pipe.

FEATURES • Decentralizes Free Pont Indicator tool

AS60096

AS60097

AS60095

Page 254: AES Catalog

COMPONENTS

F-29 << Return to Section F Menu << Return to Main Menu

1 5/8” Free Point Sensor Section (Boot)

Ref. Part No. Description 1 AS60092 1 5/8” AES Sensor Section (Boot) 2 LAF00011 Contact Plunger 3 OOV0211-95 Viton 95 O-Rings: 211 4 HOO0065 Retaining Ring, #51 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 PSA032 10-32 Contact Assy 9 1.6250065 Sensor Connect Sub10 OOV0217-95 Viton 95 O-Rings: 217 11 PSA108 Kemlon Connector Assy12 1.6250067 Jam Nut For Coil13 HOO0335-1 10-32 x .500 Socket Head Cap Screw, S.S.14 PSA094 1 5/8” Sensor Coil Assy15 OOV027-95 Viton 95 O-Rings: 027 16 PSA092 1 5/8” Clutch Assy17 1.6250071 Sensor Mandrel18 1.6250070 Sensor Housing19 PSA086 Pre Contact Assy20 HOO0321 Thrust Washers (4)21 HOO0073 Bearings (2)22 1.6250079 Boot Sub23 1.6250077 Adjustment Nut24 1.6250078 Lock for Adjustment Nut25 1.6250075 Boot Protector26 BOO0052 Rubber Boot27 1.3750022 Boot End Cap28 1.3750023 Boot End Cover29 OOV0016 Viton 75 O-Rings: 016 30 1.6250076 Locking Nut31 HOO0496 10-32 x 3/4” Socket Set Screw, Alloy32 HOO0109 1/4” - 20 x 5/16 Socket Set Screw, Alloy33 OOV0110-95 Viton 95 O-Rings: 11034 1.6250080 Sensor Mandrel Sub35 HOO0481 4-40 X 5/8 Socket Head Cap Screw, S.S.36 1.3750031 Insulator37 HOO0320 Thrust Bearings (2)38 1.3750067 1 3/8” Thread Protector, Box (Not Shown)39 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)40 LAF00128 Insulating Washer

3

4

40

7

5

6

39

9

10

11

8

13

12 3514

16

20

21

18

21

20

15

17

23

22

24

26

2729

25

28

30

34 33

32

31

36

38

19

1

37

37

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

2

FREE POINT

Page 255: AES Catalog

SPECIFICATIONS

F-30<< Return to Section F Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS60092Tool diameter (O.D.) 1.625 in. (41.28 mm)Tool length 28.28 in. (718.312 mm) Tool weight 15 lbs. (6.80 kg) Shipping length 34.28 in. (870.712 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

1 5/8” Free Point Sensor Section (Boot)

Page 256: AES Catalog

COMPONENTS

F-31 << Return to Section F Menu << Return to Main Menu

1 5/8” Grounded Bull Plug

Ref. Part No. Description 1 AS60100 1 5/8” Bull Plug Complete Assy 2 KIT-40020* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 LAF00128 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.6250100 Contact Sub Body

*KIT-40020 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring 1.0042 Contact Insulator LAF00128 Insulating Washer HOO0065 Retainer Ring, #51Does not include O-Rings

3

45

7

8

9

2

1

6

1 3/16”-12 UN-2A

FREE POINT

Page 257: AES Catalog

SPECIFICATIONS

F-32<< Return to Section F Menu << Return to Main Menu

FREE POINT

1 5/8” Grounded Bull Plug

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 1.4 in. (35.56 mm) Tool weight 1.5 lbs. (0.68 kg) Shipping length 6.4 in. (162.56 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS60100

Page 258: AES Catalog

COMPONENTS

F-33 << Return to Section F Menu << Return to Main Menu

1 13/16”-12 UN-2A 1 5/8” Combination Diode Sub

Ref. Part No. Description 1 AS60101 1 5/8” Combination Diode Complete Assy 2 KIT-40035 Complete Kit Assy * 3 LAF00011 Contact Plunger 4 HOO0181 Retainer Ring, 9/16 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0235 Contact Insulator 8 1.0037 Contact Spring 9 1.6250104 Contact Sub Body10 PSA029-47 47 OHM 1-way Diode Cartridge11 LBOO0032 Teflon® Tubing, #4 Thin Wall12 HOO0095 10-32 X 2 Pan Head Slotted Screw, S.S.13 1.3750030 10-32 Cone Receptacle14 1.0234 Insulating Washer15 0.5000005HT Cone Washer

Kit 40035 Includes: 1.0037 Contact Spring 1.3750030 10-32 Cone Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0095 10-32 X 2 Pan Head Slotted Screw, S.S. HOO0181 Retainer Ring PSA029-47 47 OHM 1-way Diode Cartridge 0.5000005HT Cone Washer LAF00011 Contact Plunger 1.0041 Insulating Washer 1.0234 Insulating Washer 1.0235 Contact Insulator* Does not include O-Rings

UP

1

2

3

4

14

7

8

9

10

5

11

12

15

13

6

1 13/16”-12 UN-2A

FREE POINT

Page 259: AES Catalog

SPECIFICATIONS

F-34<< Return to Section F Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS60101

1 5/8” Combination Diode Sub

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 2.5 in. (63.5 mm) Tool weight 2 lbs. (0.907 kg) Shipping length 8.5 in. (215.9 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Tear Drop Male (1 3/16” - 12 UN)

UP

Page 260: AES Catalog

COMPONENTS

F-35 << Return to Section F Menu << Return to Main Menu

1 5/8” Shot Rod Hanger Assembly

1

2

3

4

Ref. Part No. Description 1 AS60104 1 5/8” Shot Rod Hanger Assy (3/8” Rod)2 AS60098 1 5/8” Shot Rod Hanger Sub (1 3/16”-12 UN Threads)3 1.3750131 3/8” Shot Rod 5’ - (3/8”-16 UNC Threads) 4 1.6250101 1 5/8” Shot Rod Bull Plug

FREE POINT

Page 261: AES Catalog

SPECIFICATIONS

F-36<< Return to Section F Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS60104

1 5/8” Shot Rod Hanger Assembly

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 68.5 in. (1739.9 mm) Tool weight 4.844 lbs. (2.197 kg) Shipping length 74.5 in. (1892.3 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)

Page 262: AES Catalog

COMPONENTS

F-37 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Free Point Assembly

Ref. Part No. Description 1 AS600FP-36PCHP* 1 5/8” High Pressure Free Point Tool (36” Stroke) 2 AS60094-36HP 1 5/8” AES Slack Joint Section Complete Assy 3 AS60093HP 1 5/8” AES Upper & Lower Bow Spring Complete Assy 4 AS60092PCHP 1 5/8” AES Sensor Section Complete Assy 5 AS60100HP 1 5/8” Grounded Bull Plug 6 1.3750131 Shot Rod 7 AS60099 Bull Plug 8 AS60098 Shot Rod Hanger 9 AS60101HP 1 5/8” Comb Diode Sub10 AS60102HP 1 5/8” High Pressure CCL (Not Shown)11 AS60081HP* 1 11/16” High Pressure GO Split Cable Head (Not Shown)12 AS60102HP 1 11/16” High Pressure CCL 13 AS60081HP 1 11/16” High Pressure GO Split Cable Head Assy 14 AS60104 1 5/8” Shot Rod Assy*Specify line size when ordering.

OPTIONS: AS60093HPC High Pressure Bow Springs Casing

6

8

7

14

9

1

3

4

3

2

5

12

13

1

FREE POINT

Page 263: AES Catalog

SPECIFICATIONS

F-38<< Return to Section F Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS600FP-36PCHP

1 5/8” High Pressure Free Point Assembly

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length (closed/open) 212.875 - 248.375 in. (5407.025 - 6308.725 mm) Tool weight Available upon requestShipping length (closed) 218.875 in. (5559.425 mm)Temperature rating 500°F (260°C)Pressure rating 30000 psi (207 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)Bottom connection HIGH Pressure Female (1 3/8” - 12 STUB ACME)

Page 264: AES Catalog

COMPONENTS

F-39 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Slack Joint

Ref. Part No. Description 1 AS60094-36HP 1 5/8” High Pressure Slack Joint (36” stroke) 2 LAF00011 Contact Plunger 3 1.0041-2 Insulator 4 HOO0254 Retainer Ring, #62 5 1.0042-3 Contact Insulator 6 PSA019 Contact Assy 7 1.0037 Contact Spring 8 OOV0217-95 Viton 95 O-Rings: 217 9 OOB0217 Backup Rings 021710 1.6250092HP Slack Joint Top Sub 11 CON0105 Kemlon Connector12 HOO0094 6-32 x 3/16” Pan Head Screw 13 1.6250094-36HP Slack Joint Housing 36” HP 14 WIR1040-1.625HP Slack Joint Spring, 1 5/8 36 Stroke15 1.6250095HP Mandrel End Connector16 1.6250114HP Contact Assy17 OOV0111-95 Viton 95 O-Rings: 111 18 OOB0011 Backup Rings 001119 0.5000006 Beveled Insulator20 HOO0430 1/4” -20 x 3/16” Socket Set Screw, S.S.21 1.3750004-36HP Slack Joint Mandrel22 HOO0170 6-32 x 1/4” Button Head Cap Screw, Alloy23 1.3750185 Slack Joint Key24 HOO0091 1/4” - 20 x 3/16” Socket Set Screw, Alloy25 1.6250091HP Bottom Sub26 1.3750029 Insulator27 1.3750173 10-32 Contact28 CR10X45185 10-32 x 45.125 Contact Rod29 LBOO0032 Teflon® Tubing, #4 Thin Wall30 HOO0098 Roll Pin, 1/8” x 1” , S.S.31 1.6250115 Thread Protector, Pin (Not Shown)32 1.6250116 Thread Protector, Box (Not Shown)

1

1413

11

15

16

12

19

20

21

28

29

24

25

27

26

32

23

22

1 3/8”-12 STUB ACME - 2G

1 3/8”-12 STUB ACME - 2G

11

10

30

31

3

4

57

6

12

2

8 9

17 18

1817

FREE POINT

Page 265: AES Catalog

SPECIFICATIONS

F-40<< Return to Section F Menu << Return to Main Menu

FREE POINT

SPECIFICATIONS AS60094-36HP

1 5/8” High Pressure Slack Joint

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 68.75 in. (1746.25 mm) Tool weight Available upon requestShipping length 74.75 in. (1898.65 mm)Temperature rating 500°F (260°C)Pressure rating 30000 psi (207 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)Bottom connection HIGH Pressure Female (1 3/8” - 12 STUB ACME)

DESCRIPTION The slack joint section of the Free Point Indicator tool relieves weight above the tool assembly when the tool is at the correct depth for making a measurement.

FEATURES • Wild range of tools are abailable for operations inside large diameter casings and small diameter pipe sizes and restrictions.

Page 266: AES Catalog

COMPONENTS

F-41 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Free Point Sensor (Piston)

Ref. Part No. Description 1 AS60092PCHP 1 5/8” Sensor Section (Piston) HP 2 LAF00011 Contact Plunger 3 1.0041-2 Insulator 4 HOO0254 Retainer Ring 5 1.0042-3 Contact Insulator 6 PSA019 Contact Assy 7 1.0037 Contact Spring 8 OOV0217-95 Viton 95 O-Rings: 217 9 OOB0217 Backup Rings 021710 3.0023 Insulator for Top Coil11 1.6250065HP Sensor Connect Sub12 OOV0027-95 Viton 95 O-Rings: 027 13 PSA108HP Kemlon Connector Assy w/CON001014 1.6250067 Jam Nut For Coil15 HOO0335-1 10-32 x 1/2” Socket Head Cap Screw, S.S.16 PSA094 1 5/8” Sensor Coil Assy17 PSA0092 1 5/8” Clutch Assy18 1.6250071HP Sensor Mandrel19 1.6250070 Sensor Housing20 PSA086HP Pre Contact Assy21 HOO0320 Thrust Bearing22 HOO0321 Thrust Washer23 OOV0212 Viton 75 O-Rings: 21224 1.6250077 Adjustment Nut25 1.6250078 Lock for Adjustment Nut26 1.3750183 Piston27 1.6250105 Piston Housing28 HOO0022 4-40 x 1/4” Socket Head Cap Screw, S.S.29 1.3750181 Piston Cap30 OOV0016 Viton 75 O-Rings: 01631 1.6250106 Piston Jam Nut32 HOO0496 10-32 x 3/4” Socket Cap Screw, Alloy33 HOO0109 1/4” x 5/16 Socket Set Screw, Alloy34 OOV0110-95 Viton 95 O-Rings: 110 35 1.6250080HP Sensor Mandrel Sub36 3029-1 Treaded Retainer Ring37 HOO0073 Roller Bearings38 1.6250107HP Saver Sub39 3005 Cup Insulator40 3006 Contact41 3007 Cover Insulator42 1.6250115 Thread Protector, 1 5/8” HP, Pin (Not Shown)43 1.6250116 Thread Protector, 1 5/8” HP, Box (Not Shown)

17

16

10

40

43

36

12

41

39

38

35

33

32

29

3023

27

25

24

37

19

12

28

31

33

2022

21

18

37

15

12

14

7

542

2

11

3

3

6

4

21

22

9

8

1

13

34

26

1 3/8”-12 STUB ACME - 2G

1 3/8”-12 STUB ACME - 2G

FREE POINT

Page 267: AES Catalog

SPECIFICATIONS

F-42<< Return to Section F Menu << Return to Main Menu

SPECIFICATIONS AS60092PCHP

1 5/8” High Pressure Free Point Sensor (Piston)

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 31.187 in. (792.163 mm) Tool weight Available upon requestShipping length 37.178 in. (944.3212 mm)Temperature rating 500°F (260°C)Pressure rating 30000 psi (207 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)Bottom connection HIGH Pressure Female (1 3/8” - 12 STUB ACME)

FREE POINT

Page 268: AES Catalog

COMPONENTS

F-43 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Bull Plug (Grounded)

Ref. Part No. Description 1 AS60100HP 1 5/8” Bull Plug Complete Assy 2 1.6250109HP Bull Plug Body 3 LAF00011 Contact Plunger 4 HOO0254 Retainer Ring, #62 5 OOV0217-95 Viton 95 O-Rings: 217 6 1.0041-2 Insulating Washer 7 1.0042-3 Contact Insulator 8 1.0037 Contact Spring 9 OOB0217 Backup Ring 021710 1.6870191 Plunger Insulator

3

4

6

7

8

9

2

15

10

1 3/8”-12 STUB ACME - 2G

FREE POINT

Page 269: AES Catalog

SPECIFICATIONS

F-44<< Return to Section F Menu << Return to Main Menu

SPECIFICATIONS AS60100HP

1 5/8” High Pressure Bull Plug (Grounded)

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 2.27 in. (57.66 mm) Tool weight 1.74 lbs (0.789 kg)Shipping length 8.27 in. (210.058 mm) Temperature rating 500°F (260°C)Pressure rating 30000 psi (207 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)

FREE POINT

Page 270: AES Catalog

COMPONENTS

F-45 << Return to Section F Menu << Return to Main Menu

1 5/8” High Pressure Comb Diode Sub

Ref. Part No. Description 1 AS60101HP 1 5/8” High Pressure Comb Diode Sub 2 LAF00011 Contact Plunger 3 1.0037 Contact Spring 4 1.0042-3 Plunger Insulator HP, PN 5 PSA029-47 Diode Car Assy 47 OHM 1-way 6 OOV0217-95 Viton 95 O-Rings: 217 7 1.0041-2 Insulator Cover Washer 8 HOO0254 Retainer Ring 9 OOB0217 Backup Ring 021710 5246 Cup Insulator11 PSA024 Contact Sub Assy MC Universal Pin12 1.6250117HP 1 5/8” HP Diode Sub Body 13 CON0105 Kemlon Connector 14 CON0104-2 Boot Retainer HP

1 3/8”-12 STUB ACME - 2G

13

14

8

10

11

3

4

7

2

51

12

69

1 3/16”-12 UN-2A

FREE POINT

Page 271: AES Catalog

SPECIFICATIONS

F-46<< Return to Section F Menu << Return to Main Menu

SPECIFICATIONS AS60101HP

1 5/8” High Pressure Comb Diode Sub

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 2.79 in. (70.87 mm) Tool weight Available upon requestShipping length 8.76 in. (223.266 mm)Temperature rating 500°F (260°C)Pressure rating 30000 psi (207 MPa)Top connection HIGH Pressure Male (1 3/8” - 12 STUB ACME)Bottom connection HIGH Pressure Tear Drop Male (1 3/8” - 12 STUB ACME)

FREE POINT

Page 272: AES Catalog

COMPONENTS

F-47 << Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

1 9/16” Magnetic Decentralizer Channel Type Magnet

Ref. Part No. Description 1 AS60067 1 9/16” Magnetic Decentralizer Assy 2 KIT-60030* Contact Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0037 Contact Spring 8 1.0042 Contact Insulator 9 1.3750081 10-32 Contact 10 1.4370080 Adjustment Ring11 1.6870077 Magnet Clamp12 HOO0117 10-32 x 1/2” Button Head Socket Set Screw, Alloy13 HOO0259 Magnet14 1.3750459 Contact Rod 10-32 x 9.31215 LBOO0032 Teflon® Tubing, #4 Thin Wall16 1.0086 Beveled Insulating Washer17 1.0087A 10-32 Contact Receptacle18 1.5620017 1 9/16” Decentralizer Body19 1.3750471 Channel Magnet Clamp Rod20 1.3750067 1 3/8” Thread Protector, Box (Not Shown)21 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)22 LAF00128 Insulating Washer

*KIT-60030 Includes: LAF00011 Contact Plunger 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle 1.3750081 10-32 Contact 1.3750459 Contact Rod 10-32 x 9.312 HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

1

2

34

22

7

8

9

6

21

5

10

11

12

11

12

19

13

14

15

16

17

18

20

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

Page 273: AES Catalog

SPECIFICATIONS

F-48<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS AS60067

1 9/16” Magnetic Decentralizer Channel Type Magnet

Tool diameter (O.D.) 1.562 in. (39.563 mm)Tool length 11.75 in. (298.45 mm) Tool weight 6.30 lbs (2.857 kg)Shipping length 17.75 in. (450.85 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 274: AES Catalog

COMPONENTS

F-49 << Return to Section F Menu << Return to Main Menu

1 9/16” Bottom Decentralizer

Button Type Magnet

Ref. Part No. Description 1 AS60074 1 9/16” Bottom Decentralizer 2 1.5620019 Contact Sub Body 3 HOO0317 Carbide Pads 4 HOO0279 Decentralizer Magnets

1

2

3

4

3

3

4

DECENTRALIZERS

Page 275: AES Catalog

SPECIFICATIONS

F-50<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS AS60074

1 9/16” Bottom Decentralizer

Button Type Magnet

Tool diameter (O.D.) 1.562 in. (39.688 mm)Tool length 16.5 in. (49.1 mm) Tool weight 7.6 lbs. (3.45 kg) Shipping length 22.5 in. (571.5 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Bolt TYPE Female

Page 276: AES Catalog

COMPONENTS

F-51 << Return to Section F Menu << Return to Main Menu

1 9/16” & 1 11/16” RTG Bottom Decentralizer

Channel Type Magnet

Ref. Part No. Description 1 AS60057 1 9/16” Bottom Decentralizer Complete Assy AS60061 1 11/16” Bottom Decentralizer Complete Assy 2 HOO0117 10-32 x 1/2” Button Head Socket Screw, Alloy 3 1.6870077 1 9/16” or 1 11/16” Magnet Clamps 4 HOO0259 Channel Magnets 5 1.5620011 1 9/16” Decentralizer Body 1.6870235 1 11/16” Decentralizer Body 6 1.3750471 Channel Magnet Clamp Rod

1 5

4

6

2

3

2

3

DECENTRALIZERS

Page 277: AES Catalog

SPECIFICATIONS

F-52<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS AS60057

1 9/16” & 1 11/16” RTG Bottom Decentralizer

Channel Type Magnet

Tool diameter (O.D.) 1.562 in. (39.67 mm)Tool length 11.375 in. (288.925 mm) Tool weight 5 lbs. (2.27 kg)Shipping length 17.375 in. (441.325 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Button TYPE Female

SPECIFICATIONS AS60061Tool diameter (O.D.) 1.687 in. (42.58 mm)Tool length 11.375 in. (288.925 mm) Tool weight 5.94 lbs. (2.69 kg)Shipping length 17.375 in. (441.325 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Button TYPE Female

Page 278: AES Catalog

COMPONENTS

F-53 << Return to Section F Menu << Return to Main Menu

1 11/16” Magnetic Decentralizer Channel Type Magnet

Ref. Part No. Description 1 AS60030 1 11/16” Magnetic Decentralizer Assy 2 KIT-60030* Contact Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0037 Contact Spring 8 1.0042 Contact Insulator 9 1.3750081 10-32 Contact Recepticle10 1.6870124 Adjustment Ring11 1.6870077 Magnet Clamp12 HOO0117 10-32 x 1/2” Button Head Socket Set Screw, Alloy13 HOO0259 Magnet14 1.3750459 Contact Rod 10-32 x 9.31215 LBOO0032 Teflon® Tubing, #4 Thin Wall16 1.0086 Beveled Insulating Washer17 1.0087A 10-32 Contact Receptacle18 1.6870102 1 11/16” Decentralizer Body19 1.3750471 Channel Magnet Clamp Rod20 1.3750067 1 3/8” Thread Protector, Box (Not Shown)21 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)22 LAF00128 Insulating Washer

*KIT- 60030 Includes: LAF00011 Contact Plunger (2) 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle 1.3750081 10-32 Contact Recepticle 1.3750459 Contact Rod 10-32 x 9.312 HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings

1

2

34

21

22

7

8

9

6

5

10

11

12

11

12

19

13

14

15

16

17

18

201 3/16”-12 UN-2B

1 3/16”-12 UN-2A

DECENTRALIZERS

Page 279: AES Catalog

SPECIFICATIONS

F-54<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS

1 11/16” Magnetic Decentralizer Channel Type Magnet

SPECIFICATIONS AS60030Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 11.75 in. (298.45 mm) Tool weight 6.4 lbs. (2.9 kg)Shipping length 17.75 in. (450.85 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 280: AES Catalog

COMPONENTS

F-55 << Return to Section F Menu << Return to Main Menu

1 11/16” Magnetic Decentralizer

Button Type Magnet

1

5

1915

17

18

16

2

16

16

11

14

13

12

10

6

9

8

20

4

7

3

11

Ref. Part No. Description 1 AS60072 1 11/16” Decentralizer 2 KIT-60072* Contact Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 HOO0279 Decentralizer Magnets12 2.0105 Contact Rod 10-32 x 13.62513 1.0086 Beveled Insulating Washer14 1.0087A 10-32 Contact Receptacle15 1.6870366-1 Locking Collar16 HOO0317 Carbide Pads17 1.6870366 Contact Sub Body18 1.3750067 1 3/8” Thread Protector, Box (Not Shown)19 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)20 LAF00128 Insulating Washer

*KIT-60072 Includes: LAF00011 Contact Plunger 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle 1.3750081 10-32 Contact Recepticle HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall 2.0105 Contact Rod 10-32 x 13.625 LAF00128 Insulating WasherDoes not include O-Rings

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

DECENTRALIZERS

Page 281: AES Catalog

SPECIFICATIONS

F-56<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS AS60072

1 11/16” Magnetic Decentralizer

Button Type Magnet

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 16.125 in. (409.575 mm) Tool weight 10.5 lbs. (4.76 kg)Shipping length 22.125 in. (561.975 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 282: AES Catalog

COMPONENTS

F-57 << Return to Section F Menu << Return to Main Menu

1 11/16” GO Box to Double Sealed Tear Drop Decentralizer Channel Type Magnet

Ref. Part No. Description 1 AS60082 1 11/16” GO Box to Double Sealed Tear Drop Decent. 2 KIT-60082* Contact Kit Assy 3 1.0087A Contact Receptacle 4 1.0086 Beveled Insulating Washer 5 LBOO0032 Teflon® Tubing, #4 Thin Wall 6 1.6870077 Magnet Clamp 7 HOO0117 10-32 x 1/2” Button Head Socket Set Screw, Alloy 8 1.6870387 1 11/16” Decentralizer Body 9 1.3750471 Channel Magnet Clamp Rod10 HOO0259 Magnet11 1.6870124 Adjustment Ring12 1.0041 Insulating Washer13 3.2500111 Contact Rod 10-32 x 11.87514 1.3750030 10-32 Cone Receptacle15 OOV0211-95 Viton 95 O-Rings: 211 28 1.3750067 1 3/8” Thread Protector, Box (Not Shown)29 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)

*KIT-60082 Includes: 1.0087A Contact Receptacle 1.3750030 10-32 Cone Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer 3.2500111 Contact Rod 10-32 x 11.875Does not include O-Rings

1

2

3

16

15

17

8

9

13

12

14

10

11

7

6

6

7

5

4

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

DECENTRALIZERS

Page 283: AES Catalog

SPECIFICATIONS

F-58<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS AS60082

1 11/16” GO Box to Double Sealed Tear Drop Decentralizer Channel Type Magnet

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 11.75 in. (298.45 mm) Tool weight 6.6 lbs. (2.99 kg)Shipping length 17.75 in. (450.85 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Double Sealed Tear Drop (1 3/16” - 12 UN)

Page 284: AES Catalog

COMPONENTS

F-59 << Return to Section F Menu << Return to Main Menu

CENTRALIZERS

1 11/16” Spring Centralizer

Ref. Part No. Description 1 AS60066 1 11/16” Contact Centralizer Assy*** (less springs) 2 KIT-50023* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Spacer Contact10 1.6870330 1 11/16” Split Collar (6 sided)11 HOO0154 8-32 x 1/4” Pan Head Screw S.S.12 HOO0147 6-32 x 1/4” Socket Head Cap Screw, Alloy13 OMF0006 Bow Spring (13 1/4” Max. Diameter)** OMF0007 Bow Spring (9 1/2” Max. Diameter)** OMF0008 Bow Spring (6 1/4” Max. Diameter)**14 1.6870263 1 11/16” Centralizer Mandrel15 LBOO0032 Teflon® Tubing, #4 Thin Wall16 1.3750458 Contact Rod 10-32 x 32.18717 1.0086 Beveled Insulating Washer18 1.0087A 10-32 Contact Receptacle19 1.3750067 1 3/8” Thread Protector, Box (Not Shown)20 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)21 LAF00128 Insulating Washer** (6) Springs required on 1 11/16”***Depending on spring size

*KIT-50023 Includes: LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750458 Contact Rod 10-32 x 32.187 LAF00011 Contact Plunger 1.0086 Beveled Insulating Washer 1.3750081 10-32 Spacer Contact HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A 10-32 Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

Also available with sondex and sucker rod connections: AS60066SDX; AS60066SR

1

13

11

12

5

9

20

8

7

213

6

4

12

11

15

16

17

18

19

10

14

11

1110

2

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 285: AES Catalog

SPECIFICATIONS

F-60<< Return to Section F Menu << Return to Main Menu

CENTRALIZERS

SPECIFICATIONS AS60066

1 11/16” Spring Centralizer

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 34.625 in. (879.475 mm) Tool weight 12.5 lbs. (5.67 kg)Shipping length 40.625 in. (1031.875 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)Max I.D. Dependant upon spring size

Page 286: AES Catalog

COMPONENTS

F-61 << Return to Section F Menu << Return to Main Menu

1 11/16” Roller Centralizer

Ref. Part No. Description 1 AS60091 1 11/16” Roller Centralizer 2 OOV0211-95 Viton 95 O-Rings: 211 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Spacer Contact 9 HOO0091 1/4” - 20 x 3/16” Socket Set Screw, Alloy10 CR10X34000 Contact Rod 10-32 x 34”11 OOV0111-95 Viton 95 O-Rings: 11112 4942 Upper Mandrel Sub13 4854 Compression Sleeve14 4855 Adjustment Nut15 1.3750055M Compression Spring16 HOO0048 10-32 x 3/16” Button Head Screw, Alloy17 4859 Slip Collar Spring Mount18 5022 Spacer Ring19 4857 Locking Collar20 4939 Mandrel for Roller Arm Centralizer21 5021-16 Wheel Mount Spring Assy22 4847 Wheel Mount 23 4860 Wheel24 4941 Bottom Mandrel Sub25 5015 Sleeve26 HOO0148 6-32 x .500 Socket Head Cap Screw27 LBOO0032 Teflon® Tubing, #4 Thin Wall28 1.3750029 Contact Insulator29 1.3750173 10-32 Spacer Contact30 HOO0040 8-32x 1/8” Socket Set Screw, Alloy31 HOO0499 Axle32 4859A Set Screw Guide (Not Shown)33 HOO0155 8-32 x 1/4 Flat Head Phillips, S.S.34 1.3750067 1 3/8” Thread Protector, Box (Not Shown)35 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)36 LAF00128 Insulatoing Washer

Also available with sondex connections AS60091SDX

3

436

2

12

6

711

5

835

9

26

19

14

13

15

16

26 19

21

29

34

28

24

11

279

26

16

26

10

19

13

14

15

17

18

19

22

25

20

23

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

17 32

18

31

30

32

1

33

CENTRALIZERS

Page 287: AES Catalog

SPECIFICATIONS

F-62<< Return to Section F Menu << Return to Main Menu

CENTRALIZERS

1 11/16” Roller Centralizer

SPECIFICATIONS AS60091Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 36 in. (914.4 mm) Tool weight Available upon requestShipping length 42 in. (1066.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

Page 288: AES Catalog

COMPONENTS

F-63 << Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

1 9/16” RTG Pin To Go Box Lower Decentralizer Adapter

Ref. Part No. Description 1 AS60049 1 9/16” Lower Decentralizer Adapter 2 HOO0273 1/4-20 x 1/4” Socket Head Cap Screw 3 OOV0214-95 Viton 95 O-Ring: 214

1

3

1 3/16” - 12 UN - 2B

2

Page 289: AES Catalog

SPECIFICATIONS

F-64<< Return to Section F Menu << Return to Main Menu

DECENTRALIZERS

1 9/16” RTG Pin To Go Box Lower Decentralizer Adapter

Tool diameter (O.D.) 1.562 in. (39.67 mm)Tool length 2.937 in. (74.62 mm)Tool weight 1.59 lbs. (0.71 kg)Shipping length 5 in. (127 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60049

Page 290: AES Catalog

COMPONENTS

F-65 << Return to Section F Menu << Return to Main Menu

ACCESSORY

1 11/16” OTL GO Knuckle Joint

Ref. Part No. Description 1 AS60080 1 11/16” OTL GO Knuckle Joint Assy 2 OOV0211-95 Viton 95 O-Rings: 211 3 2373-2 Knuckle Joint Pin 4 HOO0351 Roll Pin, 1/8 x 1 1/2” , S.S. 5 2374 Knuckle Joint Swivel 6 2373-1 Knuckle Joint Box

1

2

3

4

5

6

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 291: AES Catalog

SPECIFICATIONS

F-66<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 11/16” OTL GO Knuckle Joint

SPECIFICATIONS AS60080Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 5 in. (127 mm)Tool weight 2.7 lbs. (1.22 kg)Shipping length 11 in. (279.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 292: AES Catalog

COMPONENTS

F-67 << Return to Section F Menu << Return to Main Menu

1 11/16” Knuckle Joint

Ref. Part No. Description 1 AS60062BS 1 11/16” Knuckle Joint Complete Assy 2 LAF00011 Plunger GO Pin 3 HOO0065 Retainer Ring, #51 4 1.0041 Insulating Washer 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0042 Plunger Insulator7 1.0037 Contact Spring 8 LBOO0032 Teflon® Tubing, #4 Thin Wall9 1.3750450 Contact Rod 10-32 x 3.25010 HOO0351 Roll Pin, 1/8 x 1 1/2, S.S. 11 1.3750139 10-32 Cone Nut12 WIR1063 Signal Wire13 1.3750436 Contact Rod 10-32 x2.50014 1.0086 Beveled Insulating Washer15 1.0087A 10-32 Contact Receptacle16 HOO0133 Roll Pin, 3/16 x 1, Spirol Chrome17 5356 Knuckle Joint Top Sub18 5357 Knuckle Joint Bottom Sub Body19 5351 Knuckle Joint Bottom Sub20 5354 Knuckle Joint Swivel Ball21 5352 Knuckle Joint Ball Housing22 5353 Knuckle Joint Top Sub23 5355 Rotation Cup24 1.3750081 10-32 Contact25 2351 Insulating Washer26 LAF00128 Insulating Washer

KIT-60062BS Includes: LAF00011M Contact Plunger GO Pin Modified 1.0042 Plunger Insulator 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle (2) 1.3750139 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.3750436 Contact Rod 10-32 x2.500 2351 Insulating Washer HOO0252 10-32 x 3 Pan Head Screw, S.S. WIR1063 Signal Wire LAF00128 Insulating Washer*Does not include O-Rings

1

8

13

18

4

1415

10

11

12

19

23

20

21

22

12

16

7

6

26

3 2

5

17

25

8

9

4

11

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A ACCESSORY

Page 293: AES Catalog

SPECIFICATIONS

F-68<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 11/16” Knuckle Joint

SPECIFICATIONS AS60062BSTool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 15.875 in. (403.225 mm)Tool weight 8 lbs. (3.63 kg)Shipping length 21.875 in. (555.625 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 294: AES Catalog

COMPONENTS

F-69 << Return to Section F Menu << Return to Main Menu

1 11/16” Conductor Swivel AssemblyRef. Part No. Description 1 AS70006 1 11/16” Conductor Swivel Complete Assy 2 KIT-70006 WR* Complete Kit Assy 3 CON0061 Pressure Connector 4 LAF00011 Contact Plunger 5 HOO0065 Retainer Ring, #51 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0041 Insulating Washer 8 1.0037-1 Contact Spring9 1.0042 Contact Insulator10 PSA019 Contact Assy11 HOO0073 Bearings12 1.3750031 Pressure Connector Insulator13 OOV0217-95 Viton 95 O-Rings: 21714 CON0061A Pressure Connector15 PSA053HA Contact Assy16 1.7500029M Contact Insulator17 HOO0025 6-32 x 3/16” Socket Set Screw, Alloy18 HOO0320 Thrust Bearing19 1.7500013 Swivel Shaft20 1.7500009 Bearing Housing21 1.7500010 Piston Housing22 1.7500012 Piston23 OOV0018 Viton 75 O-Rings: 018 24 OOV0026 Viton 75 O-Rings: 02625 HOO0262 Retainer Ring, #13726 OOV0113-95 Viton 95 O-Rings: 113 27 PSA024 Contact Assy28 0.6250051 Contact Insulator29 1.7500027 Contact Insulator30 HOO0254 Retainer Ring, #6231 1.7500028 Contact Plunger32 1.7500008 GO Pin Adapter Sub Body33 1.7500011 GO Pin Adapter Sub Body34 HOO0321 Thrust Bearing Washer35 1.0037 Contact Spring36 1.3750067 1 3/8” Thread Protector, Box (Not Shown)37 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)38 LAF00128 Insulating Washer

*KIT-70006 WR Includes: (2) 0.6250051 Contact Insulator LAF00011 Contact Plunger 1.7500028 Contact Plunger CON0061 Pressure Connector PSA019 Contact Assy PSA024 Contact Assy PSA053HA Contact Assy 1.0037 Contact Spring 1.0037-1 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.3750031 Pressure Connector Insulator 1.7500027 Contact Insulator 1.7500029M Contact Insulator HOO0065 Retainer Ring, #51 HOO0254 Retainer Ring, #62 HOO0262 Retainer Ring, #137 LAF00128 Insulating Washer Does not include O-RingsAlso available with sondex connections AS70006SDXKIT also available as KIT-70007LR (less rod)

15

1

2

10

32

38

37

4

5

6

35

9

7

12

3

13

18

16

17

34

1120

19

13

21

22

11

24

25

23

14

26

31

28

28

27

8

29

30

36

33

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A ACCESSORY

Page 295: AES Catalog

SPECIFICATIONS

F-70<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 11/16” Conductor Swivel Assembly

SPECIFICATIONS AS70006Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 16.937 in. (430.2 mm) Tool weight Available upon requestShipping length 22.973 in. (583.5142 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 296: AES Catalog

COMPONENTS

F-71 << Return to Section F Menu << Return to Main Menu

1 1/2” Wireline Skate, 1.71” Drift

Ref. Part No. Description 1 AS50033 1 1/2” Wireline Skate, 1.71” Drift 2 KIT-50032* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.5000069 Skate Body12 1.6870389 Contact Rod 10-32 x 9.56213 1.0086 Insulating Washer14 1.0087A Contact Receptacle15 3102 Skate Wheel16 HOO0424 3/16” x 3/4” Spiral Roll Pin, S.S.17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)18 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)19 LAF00128 Insulating Washer

*KIT-50032 Includes: 1.0086 Insulating Washer 1.0087A Contact Receptacle 1.3750081 10-32 Contact Receptacle 1.6870389 Contact Rod 10-32 x 9.562 HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings

19

1

2

5

4

718

9

6

10

16

15

16

12

13

14

11

17

3

8

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

ACCESSORY

Page 297: AES Catalog

SPECIFICATIONS

F-72<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 1/2” Wireline Skate, 1.71” Drift

SPECIFICATIONS AS50033Tool diameter (O.D.) 1.5 in. (38.1 mm)Tool length 12 in. (304.8 mm)Tool weight 6 lbs. (2.72 kg)Shipping length 18 in. (457.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 298: AES Catalog

COMPONENTS

F-73 << Return to Section F Menu << Return to Main Menu

1 9/16” Wireline Skate, 1.81” Drift

Ref. Part No. Description 1 AS60077 1 9/16” Wireline Skate, 1 13/16” Drift 2 KIT-50032* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 10-32 x 9.562 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.6870351 Skate Body12 1.6870389 Contact Rod 10-32 x 9.56213 1.0086 Insulating Washer14 1.0087A Contact Receptacle15 1.6870352 Skate Wheel16 HOO0424 3/16” x 3/4” Spiral Roll Pin, S.S.17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)18 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)19 LAF00128 Insulating Washer

*KIT-50032 Includes: 1.0086 Insulating Washer 1.0087A Contact Receptacle 1.3750081 10-32 Contact Receptacle 1.6870389 Contact Rod 10-32 x 9.562 HOO0065 Retainer Ring, #51 1.0033 Contact Plunger 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings

19

1

2

5

4

7

9

6

10

16

15

16

12

13

14

11

3

8

8

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

17

ACCESSORY

Page 299: AES Catalog

SPECIFICATIONS

F-74<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 9/16” Wireline Skate, 1.81” Drift

SPECIFICATIONS AS60077Tool diameter (O.D.) 1.562 in. (39.67 mm)Tool length 12 in. (304.8 mm) Tool weight Available upon requestShipping length 18 in. (457.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 300: AES Catalog

COMPONENTS

F-75 << Return to Section F Menu << Return to Main Menu

1 5/8” Wireline Skate, 1.875” Drift

Ref. Part No. Description 1 AS60083 1 5/8” Wireline Skate, 1.875” Drift 2 KIT-50032* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.6870388 Skate Body12 1.6870389 Contact Rod 10-32 x 9.56213 1.0086 Insulating Washer14 1.0087A Contact Receptacle15 1.6870352 Skate Wheel16 HOO0424 3/16” x 3/4” Spiral Roll Pin, S.S.17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)18 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)19 LAF00128 Insulating Washer

*KIT-50032 Includes: 1.0086 Insulating Washer 1.0087A Contact Receptacle 1.3750081 10-32 Contact Receptacle 1.6870389 Contact Rod 10-32 x 9.562 HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring (2) 1.0041 Insulating Washer 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings

19

1

2

5

4

7

9

6

10

16

15

16

12

13

14

11

17

3

8

18

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

ACCESSORY

Page 301: AES Catalog

SPECIFICATIONS

F-76<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 5/8” Wireline Skate, 1.875” Drift

Tool diameter (O.D.) 1.625 in. (41.275 mm)Tool length 12 in. (304.8 mm) Tool weight 6.92 lbs. (3.14 kg)Shipping length 18 in. (457.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60083

Page 302: AES Catalog

COMPONENTS

F-77 << Return to Section F Menu << Return to Main Menu

1 11/16” Heavy Duty Shock Tool500º Temp • Pressure Rating-21,000 psi • Tensile Strength-12,000 lbs • Compression Rating-550 lbs

Ref. Part No. Description 1 AS70005HD 1 11/16” Shock Absorber Sub Complete Assy 2 5374 Shock Tool Top Sub Body 3 5375 Shock Tool Mandrel 4 5381 Shock Tool Housing 5 HOO0065 Retainer Ring, #51 6 2351 Insulating Washer 7 LAF00011 Contact Plunger GO Pin 8 5509 Plunger Insulator 9 1.0037 Contact Spring10 PSA024 Contact Sub Assy (Universal)11 CON0012A Pressure Connector12 PSA113 Contact Thru Rod13 5377 Shock Tool Connector Sub14 5373 Shock Tool Bottom Sub15 3005 Contact Insulator16 3006 Contact Receptacle17 3007 Insulator18 3029-1 Retainer Ring19 5101 Retainer Sleeve20 PSA099 Wire Contact Assy21 00V0211-95 Viton 95 O-Rings: 21122 00V0017-95 Viton 95 O-Rings: 017 23 4759 Spring24 5376 Shock Tool Spacer25 1.0041 Insulating Washer26 HOO0498 10-32 x 3/8 Socket Cap Screw, S.S.27 KIT-70005* Complete Kit Assy28 1.3750067 1 3/8” Thread Protector, Box (Not Shown)29 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)30 LAF00128 Insulating Washer

*KIT-70005HD Includes: 1.0037 Contact Spring 3005 Contact Insulator 3006 Contact Receptacle 3007 Insulator PSA099 Wire Contact Assy PSA113 Contact Thru Rod LAF00011M Contact Plunger GO Pin Modified 1.0041 Insulating Washer 2351 Insulating Washer 5509 Plunger Insulator (2) CON0012A Pressure Connector HOO0065 Retainer Ring, #51 PSA024 Contact Sub Assy (Universal)*Does not include O-Rings

7

8

10

11

11

9

6

4

5

3

2626

12

13

25

16

1718

23

28

22

24

20

19

19

21

15

14

1

2

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A ACCESSORY

Page 303: AES Catalog

SPECIFICATIONS

F-78<< Return to Section F Menu << Return to Main Menu

ACCESSORY

1 11/16” Heavy Duty Shock Tool500º Temp • Pressure Rating-21,000 psi • Tensile Strength-12,000 lbs • Compression Rating-550 lbs

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 14.562 in. (369.87 mm)Tool weight 8.18 lbs. (3.71 kg)Shipping length 20.562 in. (522.2748 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS70005HD

Page 304: AES Catalog

COMPONENTS

F-79 << Return to Section F Menu << Return to Main Menu

1 11/16” GO Tear Drop Sub To 1 3/8” GO Box1 11/16” GO Tear Drop Sub Ref. Part No. Description 1 AS60065 1 11/16” GO Tear Drop Sub to 1 3/8” GO Box Complete Assy 2 AS60037 1 11/16” GO Tear Drop Sub Complete Assy 3 KIT-60065* Complete Kit Assy 4 1.3750030 10-32 Cone Nut 5 1.0041 Insulating Washer 6 LBOO0032 Teflon® Tubing, #4 Thin Wall 7 1.3750431 Contact Rod 10-32 x 2.125 8 1.0086 Beveled Insulating Washer 9 1.0087A Contact Receptacle10 KIT-50014** Complete Kit Assy 11 LAF00011 Contact Plunger 12 HOO0065 Retainer Ring, #5113 OOV0211-95 Viton 95 O-Rings: 21114 1.0042 Insulating Washer15 1.0037 Contact Spring16 HOO0095 10-32 x 2.000 Pan Head Screw, S.S.17 1.6870044 Contact Sub Body18 1.6870155 Contact Sub Body19 BOO0103-1/16*** Tear Drop Rubber Boot BOO0103-1/8*** Tear Drop Rubber Boot BOO0103-3/16*** Tear Drop Rubber Boot20 LAF00128 Insulating Washer***Sold Separately

*KIT-60065 Includes: 1.0041 Insulating Washer 1.0086 Beveled Insulating Washer 1.0087A Contact Receptacle 10-32 x 2.125 1.3750030 10-32 Cone Nut 1.3750431 10-32 Contact Rod LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

**KIT-50014 Includes: (3) 1.0041 Insulating Washer 1.3750030 10-32 Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0042 Insulating Washer HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring HOO0095 10-32 x 2.000 Pan Head Screw, S.S.Does not include O-Rings

1

3

7

4

5

6

8

9

17

2

10

18

13

12 11

20

14

15

5

6

16

5

4

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

19

ACCESSORY

Page 305: AES Catalog

SPECIFICATIONS

F-80<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” GO Tear Drop Sub To 1 3/8” GO Box1 11/16” GO Tear Drop Sub

SPECIFICATIONS AS60037Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 1.00 in. (25.4 mm) Tool weight 1.13 lb. (0.51 kg)Shipping length 7 in. (177.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

SPECIFICATIONS AS60065Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 2.375 in. (60.325 mm) Tool weight 1.30 lbs. (0.59 kg)Shipping length 8.375 in. (212.725 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

AS60065

AS60037

Page 306: AES Catalog

COMPONENTS

F-81 << Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” GO Double Box 1 11/16” GO Double Pin Ref. Part No. Description 1 AS60060 1 11/16” GO Double Box Assy 2 AS60070 1 11/16” GO Double Pin Assy 3 KIT-60060* Complete Kit Assy 4 KIT-60070** Complete Kit Assy 5 1.0087A 10-32 Contact Receptacle 6 1.0086 Beveled Insulating Washer 7 LBOO0032 Teflon® Tubing, #4 Thin Wall 8 1.0213 Contact Rod 10-32 x 1.400 9 LAF00011 Contact Plunger10 HOO0065 Retainer Ring, #5111 LAF00128 Insulating Washer12 OOV0211-95 Viton 95 O-Ring: 21113 1.0028 Contact Insulator 14 1.0037-1 Contact Spring15 1.6870221 Contact Sub Body16 1.6870251 Contact Sub Body

*KIT-60060 Includes: (2) 1.0087A 10-32 Contact Receptacle (2) 1.0086 Beveled Insulating Washer 1.0213 Contact Rod 10-32 x 1.400 LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

**KIT60070 Includes: 1.0028 Contact Insulator (2) LAF00011 Contact Plunger 1.0037-1 Contact Spring (2) LAF00128 Insulating Washer (2) HOO0065 Retainer Ring, #51Does not include O-Rings

1

3

15

5

6

7

8

6

5

2

416

12

12

9

10

11

13

14

11

10

9

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 307: AES Catalog

SPECIFICATIONS

F-82<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” GO Double Box1 11/16” GO Double Pin

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 1.438 in. (36.53 mm) Tool weight 1.4 lbs. (0.64 kg)Shipping length 7.438 in. (188.925 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 5.375 in. (136.525 mm) Tool weight 2.45 lbs. (1.11 kg)Shipping length 11.375 in. (288.925 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60060

SPECIFICATIONS AS60070

AS60060

AS60070

Page 308: AES Catalog

COMPONENTS

F-83 << Return to Section F Menu << Return to Main Menu

1 11/16” GO Box/Tear Drop With Pressure Connector & Ground Screw Ref. Part No. Description 1 AS60085 1 11/16” GO Box / Tear Drop w/Pressure Connector & Ground Screw 2 KIT-60085* Complete Kit Assy 3 CON0012 Pressure Connector 4 3005 Contact Insulator 5 3006 Brass Contact 6 3007 Insulator 7 3029-1 Retainer Ring 8 HOO0094 6-32 x 3/16 Pan Head Screw, S.S. 9 OOV0008-95 Viton 95 O-Ring: 008 10 1.6870398 1 11/16” GO Box / Tear Drop w/Pressure Connector Body

*KIT-60085 Includes: 3005 Insulator 3006 Brass Contact 3007 Insulator CON0012 Pressure ConnectorDoes not include O-Rings1

2

8

93

4

6

7

5

1 3/16” - 12 UN-2B

1 3/16” - 12 UN-2A

10

ADAPTOR

Page 309: AES Catalog

SPECIFICATIONS

F-84<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” GO Box/Tear Drop With Pressure Connector & Ground Screw

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 2.925 in. (74.295 mm) Tool weight 1.5 lbs. (0.68 kg)Shipping length 8.925 in. (226.695 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Tear Drop w/Pressure Connector (1 3/16” - 12 UN)

Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60085

Page 310: AES Catalog

COMPONENTS

F-85 << Return to Section F Menu << Return to Main Menu

1 11/16” GO Pin/Tear Drop With Pressure Connector & Ground Screw Ref. Part No. Description 1 AS60086 1 11/16” GO Pin / Tear Drop w/Pressure Connector & Ground Screw 2 KIT-60086* Complete Kit Assy 3 CON0012A Pressure Connector 4 2493 Contact Insulator 5 LAF00011 Contact Plunger 6 1.0041 Insulator 7 HOO0065 Retainer Ring, #51 8 HOO0094 6-32 x 3/16” Pan Head Screw, S.S. 9 OOV0008-95 Viton 95 O-Ring: 008 10 PSA024 Contact11 1.0037 Spring12 OOV0211-95 Viton 95 O-Rings: 21113 1.6870399 1 11/16” GO Pin / Tear Drop w/Pressure Connector Body14 LAF00128 Insulating Washer

*KIT-60086 Includes: LAF00011 Brass Plunger 1.0037 Spring CON0012A Pressure Connector PSA024 Contact 1.0041 Insulator 2493 Contact Insulator HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings.

1

2

12

14

75

4

11

10

6

8

93

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2A

13

ADAPTOR

Page 311: AES Catalog

SPECIFICATIONS

F-86<< Return to Section F Menu << Return to Main Menu

1 11/16” GO Pin/Tear Drop With Pressure Connector & Ground Screw

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 1.34 in. (34.04 mm) Tool weight 1.5 lbs. (0.68 kg)Shipping length 7.134 in. (181.204 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Tear Drop w/Pressure Connector (1 3/16” - 12 UN)

SPECIFICATIONS AS60086

ADAPTOR

Page 312: AES Catalog

COMPONENTS

F-87 << Return to Section F Menu << Return to Main Menu

1 1/2” GO Low Pressure Firing Sub 1 1/2” GO High Pressure Firing SubRef. Part No. Description 1 AS80001 1 1/2” GO Low Pressure Firing Sub Assy 2 AS80005 1 1/2” GO High Pressure Firing Sub Assy 3 KIT-80001* Complete Kit Assy 4 KIT-80005** Complete Kit Assy 5 1.5000006 GO Firing Sub Contact 6 OOV0114-95 Viton 95 O-Rings: 114 7 1.5000045 GO Firing Sub Contact 8 LBOO0097 Teflon® Tubing, 3/8 Thin Wall 9 OOV0214-95 Viton 95 O-Rings: 214 10 1.5000007 Viton Rubber Washer11 1.5000008 Insulating Washer12 HOO0138 3/8”-16 Hex Nut, S.S.13 1.5000004 Low Pressure Firing Sub Body14 1.5000044 High Pressure Firing Sub Body

*KIT-80001 Includes: 1.5000006 GO Firing Sub Contact 1.5000007 Viton Rubber Washer HOO0138 3/8”-16 Hex Nut, S.S. (2) 1.5000008 Insulating Washer (2) OOV0114-95 Viton 95 O-Rings: 114 LBOO0097 Teflon® Tubing, 3/8 Thin WallDoes not include O-Rings

**KIT-80005 Includes: 1.5000007 Viton Rubber Washer HOO0138 3/8”-16 Hex Nut, S.S. (2) 1.5000008 Insulating Washer 1.5000045 GO Firing Sub Contact (2) OOV0114-95 Viton 95 O-Rings: 114 LBOO0097 Teflon® Tubing, 3/8” Thin WallDoes not include O-Rings

1

3

11

5

6

8

9

10

11

12

13

2

4

7

611

914

10

11

12

8

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2B

1 3/16” - 12 UN-2B

ADAPTOR

Page 313: AES Catalog

SPECIFICATIONS

F-88<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 1/2” GO Low Pressure Firing Sub 1 1/2” GO High Pressure Firing Sub

Tool diameter (O.D.) 1.5 in. (38.1 mm)Tool length 2.75 in. (6.85 mm) Tool weight 1.5 lbs. (0.68 kg)Shipping length 8.75 in. (222.25 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE HIGH Pressure Button (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Tool diameter (O.D.) 1.5 in. (38.1 mm)Tool length 2.75 in. (69.85 mm) Tool weight 1 lb. (0.45 kg)Shipping length 8.75 in. (222.25 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Low Pressure Button (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS80005

SPECIFICATIONS AS80001

AS80001

AS80005

Page 314: AES Catalog

COMPONENTS

F-89 << Return to Section F Menu << Return to Main Menu

1 11/16” GO Firing Sub

Ref. Part No. Description 1 AS60076 1 11/16” GO Firing Sub Assy 2 KIT-80001* Complete Kit Assy 3 1.5000006 GO Firing Sub Contact 4 OOV0114-95 Viton 95 O-Rings: 114 5 LBOO0097 Teflon® Tubing, 3/8” Thin Wall 6 OOV0214-95 Viton 95 O-Rings: 214 7 1.5000007 Viton Rubber Washer 8 1.5000008 Insulating Washer 9 HOO0138 3/8”-16 Hex Nut, S.S.10 1.6870345 Firing Sub Body

*KIT-80001 Includes: 1.5000006 GO Firing Sub Contact (2) 1.5000008 Insulating Washer HOO0138 3/8”-16 Hex Nut, S.S. (2) OOV0114-95 Viton 95 O-Rings: 114 V95 1.5000007 Viton Rubber Washer LBOO0097 Teflon® Tubing, 3/8” Thin WallDoes not include O-Rings

1

2

4

3

8

8

7

6

5

9

10

1 3/16” - 12 UN-2A

1 3/16” - 12 UN-2B

ADAPTOR

Page 315: AES Catalog

SPECIFICATIONS

F-90<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” GO Firing Sub

Tool diameter (O.D.) 1.67 in. (42.85 mm)Tool length 2.75 in. (69.85 mm) Tool weight 1.4 lbs. (0.64 kg)Shipping length 8.75 in. (222.25 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Button (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60076

Page 316: AES Catalog

COMPONENTS

F-91 << Return to Section F Menu << Return to Main Menu

1 1/2” GO Firing Sub To Atlas Sub

Ref. Part No. Description 1 AS80007 1 1/2” GO Firing Sub to Atlas Sub Complete Assy 2 KIT-80007* Complete Kit Assy 3 1.5000022 Firing Sub Contact 4 1.5000007 Viton Rubber Shock Washer 5 PSA015 Spring-Loaded Plunger 6 1.5000042 Contact Sub Body 7 OOV0114-95 Viton 95 O-Rings: 114 8 1.5000008 Insulating Washer 9 OOV0214-95 Viton 95 O-Rings: 214 10 LBOO0097 Teflon® Tubing, 3/8” Thin Wall11 HOO0138 3/8” -16 Hex Nut, S.S.

*KIT-80007 Includes: (2) 1.5000008 Insulating Washer 1.5000007 Viton Rubber Shock Washer 1.5000022 Firing Sub Contact HOO0138 3/8” -16 Hex Nut, S.S. PSA015 Spring-Loaded Plunger LBOO0097 Teflon® Tubing, 3/8” Thin Wall (2) OOV0114-95 Viton 95 O-Rings: 114Does not include O-Rings: OOV0214-95 (#9 above)

1

2

3

7 8

9

10

4

8

11

5

6

1 3/16” - 12 UN-2A

1 1/8” - 12 UN-2B

ADAPTOR

Page 317: AES Catalog

SPECIFICATIONS

F-92<< Return to Section F Menu << Return to Main Menu

1 1/2” GO Firing Sub To Atlas Sub

Tool diameter (O.D.) 1.5 in. (38.1 mm)Tool length 4.063 in. (103.2 mm) Tool weight 1.43 lbs. (0.65 kg)Shipping length 10.063 in. (255.600 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Button (1 3/16” - 12 UN)Bottom connection Baker Atlas TYPE Female (1 3/16” - 12 UN)

ADAPTOR

SPECIFICATIONS AS80007

Page 318: AES Catalog

COMPONENTS

F-93 << Return to Section F Menu << Return to Main Menu

1 9/16” RTG Tandem Sub1 9/16” RTG Lower Blast Sub1 9/16” RTG Top Sub1 9/16” RTG Bull Plug1 9/16” Lower Decentralizer Adapter1 9/16” Lower Blast Sub W/Go BoxRef. Part No. Description 1 AS60045 1 9/16” RTG Tandem Sub Complete Assy 2 AS60047 1 9/16” RTG Lower Blast Sub 3 AS60046 1 9/16” RTG Top Sub Complete Assy 4 AS60048 1 9/16” RTG Bull Plug Complete Assy 5 AS60049 1 9/16” Lower Decentralizer Adapter Assy 6 AS60071 1 9/16” Lower Blast Sub W/Go Box 7 OOV0214-95 Viton 95 O-Rings: 214

1

7

8

7

8

2

5

6

7

3

7

74

1 3/16” - 12 UN - 2B

1 3/16” - 12 UN - 2B

ADAPTOR

Page 319: AES Catalog

SPECIFICATIONS

F-94<< Return to Section F Menu << Return to Main Menu

1 9/16” RTG Tandem Sub1 9/16” RTG Lower Blast Sub1 9/16” RTG Top Sub1 9/16” RTG Bull Plug1 9/16” Lower Decentralizer Adapter1 9/16” Lower Blast Sub W/Go Box

SPECIFICATIONS AS60045 AS60047Tool diameter (O.D.) 1.562 in. (39.67 mm) 1.562 in. (39.67 mm)Tool length 2.512 in. (63.80 mm) 10.625 in. (269.88 mm)Tool weight 1.57 lbs. (0.71 kg) 3.87 lbs. (1.76 kg)Shipping length 5.5 in. (139.7 mm) 11.63 in. (295.40 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 20000 psi (138 MPa) 20000 psi (138 MPa)Top connection RTG Pin RTG BoxBottom connection RTG Pin Bolt Connect Pin

SPECIFICATIONS AS60046 AS60048Tool diameter (O.D.) 1.562 in. (39.67 mm) 1.562 in. (39.67 mm)Tool length 5.5 in. (139.7 mm) 1.512 in. (38.405 mm)Tool weight 2.53 lbs. (1.45 kg) 1.39 lbs. (0.63 kg)Shipping length 8.5 in. (215.9 mm) 3.5 in. (88.9 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 20000 psi (138 MPa) 20000 psi (138 MPa)Top connection Go Box RTG PinBottom connection RTG Pin Bull nose

SPECIFICATIONS AS60049 AS60071 Tool diameter (O.D.) 1.562in. (39.67 mm) 1.562 in. (39.67 mm)Tool length 2.937 in. (74.60 mm) 13.25 in. (336.55 mm)Tool weight 1.59 lbs. (0.445 kg) 4.07 lbs. (1.85 kg)Shipping length 5 in. (127 mm) 13.25 in. (336.55 mm)Temperature rating 500°F (260°C) 500°F (260°C)Pressure rating 20000 psi (138 MPa) 20000 psi (138 MPa)Top connection RTG Pin RTG BoxBottom connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” - 12 UN)

ADAPTORAS60045 AS60047

AS60046

AS60048

AS60049

AS60071

Page 320: AES Catalog

COMPONENTS

F-95 << Return to Section F Menu << Return to Main Menu

1 11/16” Schlumberger Pin to 1 3/8” GO Box

Ref. Part No. Description 1 AS60079 1 11/16” Schlumberger Pin to 1 3/8” GO Box Assy 2 KIT-60079* Complete Kit Assy 3 1.6870154 Contact Receptacle 4 OOV0214-95 Viton 95 O-Rings: 214 5 1.3750172 Cone Insulator 6 LBOO0032 Teflon® Tubing, #4 Thin Wall 7 1.3750432 Contact Rod 10-32 x 1.875 8 1.0086 Beveled Insulating Washer 9 1.0087A 10-32 Contact Receptacle10 1.6870277 Contact Sub Body

*KIT-60079 Includes: 1.0087A 10-32 Contact Receptacle 1.3750172 Contact Insulator 1.6870154 Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0086 Beveled Insulating Washer 1.3750432 Contact Rod 10-32 x 1.875Does not include O-Rings

1

2

3

4

5

6

7

8

9

10

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

ADAPTOR

Page 321: AES Catalog

SPECIFICATIONS

F-96<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” Schlumberger Pin to 1 3/8” GO Box

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 2.75 in. (69.85 mm) Tool weight 2 lbs. (0.907 kg)Shipping length 8.75 in. (222.25 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection 1 11/16” Schlumberger TYPE Male (1 3/8” - 12 UN)

SPECIFICATIONS AS60079

Page 322: AES Catalog

COMPONENTS

F-97 << Return to Section F Menu << Return to Main Menu

1 11/16” Schlumberger Box To 1 3/8” GO Pin1 11/16” Schlumberger Pin To 1 3/8” GO PinRef. Part No. Description 1 AS60001 1 11/16” Schlumberger Box to 1 3/8” GO Pin Assy 2 KIT-60001* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 1.0041 Insulating Washer 6 OOV0211-95 Viton 95 O-Rings: 211 7 1.0124 Contact Insulator 8 1.0037-1 Contact Spring 9 1.6870002 Contact Sub Body10 1.6870003 Contact Plunger11 AS60018 1 11/16” Schlumberger PIN to 1 3/8” GO Pin Assy 12 KIT-60018** Complete Kit Assy 13 1.0042 Contact Insulator14 1.0037 Contact Spring15 LBOO0032 Teflon® Tubing, #4 Thin Wall16 HOO0252 10-32 x 3.000 Pan Head Screw, S.S.17 1.3750172 Beveled Insulator18 OOV0214-95 Viton 95 O-Rings: 214 19 1.6870154 Schlumberger Contact20 1.6870060 Contact Sub Body21 LAF00128 Insulating Washer

*KIT-60001 Includes: 1.0037-1 Contact Spring 1.0041 Insulating Washer 1.6870003 Contact Plunger HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0124 Contact Insulator LAF00128 Insulating WasherDoes not include O-Rings

**KIT-60018 Includes: 1.0041 Insulating Washer HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.3750172 Beveled Insulator 1.6870154 Schlumberger Contact 1.0037 Contact Spring 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0252 10-32 x 3.000 Pan Head Screw, S.S. LAF00128 Insulating WasherDoes not include O-Rings

1 2

3 4 21

6

7

8

9

5

10

3

12

421

6

13

14

5

20

15

16

17

18

19

1 3/8”-12 UN-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

1 3/8”-12 UN-2A

11

ADAPTOR

Page 323: AES Catalog

SPECIFICATIONS

F-98<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” Schlumberger Box To 1 3/8” GO Pin1 11/16” Schlumberger Pin To 1 3/8” GO Pin

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 2.28 in. (57.912 mm) Tool weight 2.37 lbs. (1.06 kg)Shipping length 8.28 in. (210.312 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection 1 11/16” Schlumberger TYPE Male (1 3/16” - 12 UN)

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 5.312 in. (134.92 mm) Tool weight 2.51 lbs. (1.14 kg)Shipping length 11.312 in. (287.324 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection 1 11/16” Schlumberger TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60001

SPECIFICATIONS AS60018

AS60001

AS60018

Page 324: AES Catalog

COMPONENTS

F-99 << Return to Section F Menu << Return to Main Menu

3/4” Sucker Rod Pin To 1 3/8” GO Pin3/4” Sucker Rod Box To 1 3/8” GO Pin3/4” Sucker Rod Box To 1 3/8” GO Pin Ref. Part No. Description 1 AS80002 3/4” Sucker Rod Pin to 1 3/8” OD 2 AS80003 3/4” Sucker Rod Box to 1 1/2” Box Pin Assy OD 3 KIT-30006* Complete Kit Assy 4 LAF00011 Contact Plunger 5 HOO0065 Retainer Ring, #51 6 LAF00128 Insulating Washer 7 OOV0211-95 Viton 95 O-Rings: 211 8 1.0037 Contact Spring 9 1.0042 Contact Insulator10 1.5000058 Contact Sub Body11 AS80006 3/4” Sucker Rod Box to 1 3/8” GO Pin Assy OD12 1.3750506 Contact Sub Body

*KIT-30006 Includes: LAF00011 Contact Plunger 1.0037 Contact Spring LAF00128 Insulating Washer 1.0042 Contact Insulator HOO0065 Retainer Ring, #51Does not include O-Rings

1

3

4

56

7

9

8

10

1 1/16” - 10 NS

2

1 1/16” - 10 NS

11

3

64

5

7

9

8

1 1/16” - 10 NS

12

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

1 3/16”-12 UN-2A

ADAPTOR

Page 325: AES Catalog

SPECIFICATIONS

F-100<< Return to Section F Menu << Return to Main Menu

ADAPTOR

3/4” Sucker Rod Pin To 1 3/8” GO Pin3/4” Sucker Rod Box To 1 3/8” GO Pin3/4” Sucker Rod Box To 1 3/8” GO Pin

Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 3.375 in. (85.725 mm) Tool weight 1.22 lbs. (0.55 kg)Shipping length 9.375 in. (238.125 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection 5/8” Sucker Rod Female (1 1/16” - 10 UN)

SPECIFICATIONS AS80003Tool diameter (O.D.) 1.5 in. (38.1 mm)Tool length 4.437 in. (112.7 mm) Tool weight 1.34 lbs. (0.61 kg)Shipping length 10.437 in. (265.099 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection 5/8” Sucker Rod Female (1 1/16” - 10 UN)

SPECIFICATIONS AS80002Tool diameter (O.D.) 1.375 in. (34.925 mm)Tool length 1.437 in. (36.5 mm) Tool weight 1.16 lbs. (0.526 kg)Shipping length 7.437 in. (188.9 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection 5/8” Sucker Rod Male (1 1/16” - 10 UN)

SPECIFICATIONS AS80006

AS80006

AS80002

AS80003

Page 326: AES Catalog

COMPONENTS

F-101 << Return to Section F Menu << Return to Main Menu

1 11/16” Knuckle Joint Assy Clvs Go High Offset

Ref. Part No. Description1 AS60110 Knuckle Joint Assy CLVS Go High Offset2 1.6870225 Knuckle Joint 1 11/16”3 LAF00061 Knuckle Joint Offset Sub 1 11/16”4 1.6870224 Knuckle Joint Sub 1 11/16”5 AS60037 TD PN / GO PN 1 11/16”6 AS60065 TD Assy 1 11/16” To Go Box7 1.6870334 Pin Knuckle Joint 1 11/16”

3

2

4

5

6

7

1

ADAPTOR

Page 327: AES Catalog

SPECIFICATIONS

F-102<< Return to Section F Menu << Return to Main Menu

ADAPTOR

1 11/16” Knuckle Joint Assembly Clvs Go High Offset

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 31.725 in. (805.725 mm) Tool weight Available upon requestShipping length 37.725 in. (958.215 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60110

Page 328: AES Catalog

COMPONENTS

F-103 << Return to Section F Menu << Return to Main Menu

1 3/16”-12UN2A SWAB MANDREL

1 11/16” x 1’ Pump Down Sub Swab Mandrel

Ref. Part No. Description1 AS60109 Pump Down Sub (Swab Mandrel)2 3531 DWS Swab Tool Mandrel3 3532 DSW Swab Tool Adapter Sub4 1.0087A Contact Receptacle5 1.0086 Insulator Washer Beveled6 1.0041 Insulating Washer 7 1.0042 Plunger Insulator 8 1.3750081 10-32 Contact 9 1.0037 Contact Spring 10 LAF00011 Contact Plunger 11 HOO0065 Retainer Ring 12 OOV0115-95 Viton 95 O-Ring: 11513 OOV0211-95 Viton 95 O-Ring: 21114 1.6870242 Contact Rod 15 LBOO0032 Teflon Tubing 16 LAF00128 Insulating Washer

1 3/16”-12UN-2B

10

5

9

2

8

4

6

11

1

13

12

14

15

7

16

Page 329: AES Catalog

SPECIFICATIONS

F-104<< Return to Section F Menu << Return to Main Menu

SWAB MANDREL

1 11/16” x 1’ Pump Down Sub Swab Mandrel

Tool diameter (O.D.) 1.687 in. (42.85 mm)Tool length 17.125 in. (434.975 mm)Tool weight Available upon requestShipping length 23.125 in. (587.375 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

SPECIFICATIONS AS60109

Page 330: AES Catalog
Page 331: AES Catalog

<< Return to Main Menu

SECTION G

1 3/4” - 3 1/4”

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Table of Contents - 1 3/4” - 3 1/4”PAGE TOOLSINKER BARSG-1 2” x 5’ Tungsten Sinker Bar Assembly 2” x 7’ Tungsten Sinker Bar Assembly 2” x 5’ Lead Sinker Bar Assembly 2” x 7’ Lead Sinker Bar Assembly

CASING COLLAR LOCATORSG-3 2 1/8” Casing Collar Locator Assembly (G)G-5 3 1/4” Casing Collar Locator Assembly (G) 3 1/4” Casing Collar Locator Coil & Magnet Assembly (G)G-7 3 1/8” Casing Collar Locator Assembly (G)G-9 4 1/2” Casing Collar Locator Assembly ShootingG-11 2 3/4” Casing Collar Locator Assembly

DECENTRALIZERS & CENTRALIZERSG-13 2” Magnetic Decentralizer (Button) G-15 2” Bottom Decentralizer (Button) G-17 2” Magnetic Decentralizer (Channel) G-19 2” Bottom Decentralizer (Channel)G-21 2 3/4” Spring Centralizer G-23 2 3/4” Roller Centralizer

KNUCKLE JOINTS, SWIVELS, SKATES & SHOCK SUBSG-25 2 3/4” Quick Change Knuckle JointG-27 3 1/4” AES SwivelG-29 1 3/4” Wireline Skate, 2 1⁄2” Drift G-31 2 1/16” Wireline Skate, 2.625” Drift G-33 2 1/8” Shock Absorber Complete Assembly G-35 2 3/4” Shock Absorber Complete Assembly G-37 3 1/8” Shock Absorber Complete Assembly G-39 2 7/8” Conductor Swivel Assembly

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBSG-41 3 1/4” Quick Change AssemblyG-43 3 1/8” Quick Change AssemblyG-45 2 1/2” Quick Change Box to GO Box G-47 1 3/4” Double Quick Change Pin Assembly G-49 1 3/4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Pin Assembly 1 3/4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Tear DropAssembly 1 3/4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Box AssemblyG-51 2” RTG Tandem Sub Assembly 2” RTG Bottom Adaptor Sub Assembly

2” RTG Bull Plug Assembly 2” RTG Top Sub AssemblyG-53 #10 Baker Firing Head to GO Quick Change Assembly #20 Baker Firing Head to GO Quick Change Complete AssemblyG-55 #10 Baker Firing Head Setting Tool AssemblyG-57 #20 Baker Firing Head Setting Tool AssemblyG-59 #10 Baker Firing Head to GO Quick Change Assembly #20 Baker Firing Head to GO Quick Change Assembly

Page 332: AES Catalog

COMPONENTS

G-1 << Return to Section G Menu << Return to Main Menu

SINKER BAR

2” Sinker Bars

Ref. Part No. Description 1 AS90001 2” X 5’ Tungsten Sinker Bar Assy AS90002 2” X 7’ Tungsten Sinker Bar Assy AS90023 2” X 5’ Lead Sinker Bar Assy AS90024 2” X 7’ Lead Sinker Bar Assy 2 LAF00011 Contact Plunger 3 HOO0065 Retainer Ring, #51 4 OOV0211-95 Viton 95 O-Ring: 211 5 1.0041 Insulating Washer 6 1.0042 Contact Insulator 7 1.0037 Contact Spring 8 1.3750081 10-32 Contact 9 LBOO0032 Teflon® Tubing, #4 Thin Wall10 1.3750296ASSY Contact Thru Rod For 5’ BARS (Plunger Contact) 1.3750184ASSY Contact Thru Rod For 7’ BARS (Plunger Contact)11 1.0086 Insulating Bevel Washer12 1.0087A Contact Receptacle13 KIT-40004* All 5’ Bars Listed Above (Plunger Contact) KIT-40015** All 7’ Bars Listed Above (Plunger Contact)14 1.3750067 1 3/8” Thread Protector, Box (Not Shown)15 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)16 KIT-40004LR*** Complete Kit Assy17 LAF00128 Insulating Washer

*KIT-40004 Includes: 1.3750296ASSY Contact Thru Rod For 5’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal)Does not include O-Rings

**KIT-40015 Includes: 1.3750184ASSY Contact Thru Rod For 7’ BARS (Plunger Contact) LBOO0032 Teflon® Tubing, #4 Thin Wall KIT-40004LR Kit S.B. Less Rod (Universal)Does not include O-Rings

***KIT-40004LR Includes: LAF00011 Contact Plunger 1.0086 Insulating Bevel Washer 1.3750081 10-32 Contact HOO0065 Retainer Ring, #51 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

2

3

4

17

16

6

15

7

8

5 9

10

11

12

14

1 13

16

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

Page 333: AES Catalog

SPECIFICATIONS

G-2<< Return to Section G Menu << Return to Main Menu

SINKER BAR

2” Sinker Bars

SPECIFICATIONS AS90001 AS90002Tool diameter (O.D.) 2 in. (50.8 mm) 2 in. (50.8 mm)Tool length 60 in. (1524 mm) 72 in. (1828.8 mm)Tool weight 87 lbs. (39.46 kg) 117 lbs. (53.07 kg)Shipping length 66 in. (1676.4 mm) 78 in. (1981.2 mm)Temperature rating 500°F (260°C) 500°F (260°C) Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” 12 UN)

SPECIFICATIONS AS90023 AS90024 Tool diameter (O.D.) 2 in. (50.8 mm) 2 in. (50.8 mm)Tool length 60 in. (1524 mm) 72 in. (1828.8 mm)Tool weight 64 lbs. (29.03 kg) 90 lbs. (40.82 kg)Shipping length 66 in. (1676.4 mm) 78 in. (1981.2 mm)Temperature rating 500°F (260°C) 500°F (260°C) Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Go TYPE Female (1 3/16” 12 UN)

Bottom connection Go TYPE Male (1 3/16” - 12 UN) Go TYPE Male (1 3/16” 12 UN)

DESCRIPTION Sinker bars are added to the tool string to provide the weight required to overcome friction and pressure differential, allowing the tool string to descend downhole.

FEATURES • Lead and tungsten models available

Page 334: AES Catalog

COMPONENTS

G-3 << Return to Section G Menu << Return to Main Menu

2 1/8” Casing Collar Locator

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS90048 2 1/8” CCL Complete Assy (G) 2 PSA065 2 1/8” Coil Assy (G) 3 HOO0004 4–40 x 1/4” Pan Hd. Screw, S.S. 4 HOO0126SS Ground Spring, S.S. 5 OOV0320-95 Viton 95 O-Rings: 320 6 2.0116 Collar Locator Magnet 7 HOO0548 1/4”-28 x 2 1/4” Socket Head Cap Screw, Alloy 8 2.0113 2 1/8” CCL Upper Pole Piece 9 2.0115 CCL End Contact Insulator10 HOO0085 6–32 x 3/8” Socket Set Screw, Alloy11 1.6870019 CCL Contact Receptacle 12 AS90048-1 2 1/8” CCL Coil & Magnet Assy (G)13 2.0112 2 1/8” CCL Lower Pole Piece14 1.6870187 Insulating Washer15 1.6870188 CCL Contact Receptacle16 1.6870189 Plunger Insulator17 SEM0069 Double Diode18 1.6870190 Brass Plunger19 1.6870191 Plunger Washer20 HOO0254 Retainer Ring, #6221 HOO0065 Retainer Ring, #5122 1.0041 Insulating Washer23 LAF00011 Contact Plunger24 1.0037 Contact Spring25 1.0042 Plunger Insulator26 OOV0223-95 Viton 95 O-Rings: 223 27 HOO0139 10–32 x 1” Pan Hd. Screw, S.S.28 1.0086 Beveled Insulating Washer29 1.0087A Contact Receptacle30 2.0109 CCL Upper Adapter Sub31 2.0110 CCL Lower Adapter Sub32 2.0111 2 1/8” CCL Housing33 LBOO0032 Teflon® Tubing, #4 Thin Wall34 HOO0141 6–32 x 1/8” Socket Set Screw, Alloy35 AS90048-2 2 1/8” CCL Top Sub Assy (G)36 1.3750067 1 3/8” Thread Protector, Box (Not Shown)

3

4

6

7

8

5

9

101

13

12

2

6

7

14

15

1617

1819 20

21

22

23

24

25

26

27

28

29

30

31

36

32

33

34

11

35

1 3/16”-12 UN-2B

1 3/16”-12 UN-2B

36

CASING COLLAR LOCATOR

Page 335: AES Catalog

SPECIFICATIONS

G-4<< Return to Section G Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS90048

2 1/8” Casing Collar Locator

Tool diameter (O.D.) 2.125 in. (54 mm)Tool length 20.7 in. (525.78 mm) Tool weight 17.9 lbs. (8.12 kg)Shipping length 23.7 in. (602 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 3800 - 4300 OhmsTop connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)Sensor measure point 10.1 in. (256.54 mm) from bottom of tool

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Depth Correlation• Can be run with free point back off

Page 336: AES Catalog

COMPONENTS

G-5 << Return to Section G Menu << Return to Main Menu

3 1/4” Casing Collar Locator (Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS90021 3 1/4” CCL Complete Assy (G) 2 3.2500109 CCL End Insulator 3 HOO0004 4–40 x 1/8” Pan Hd. Screw, S.S. 4 SEM0069 Double Diode 5 3.2500108 CCL Lower Pole Piece 6 3.2500058 CCL Magnet Spacer 7 3.2500042 CCL Magnet 8 3.2500055 Magnet Sleeve 9 PSA046 Coil Holder Assy (G)10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.3750479 Contact Rod 10-32 x 11.687 12 3.0045 CCL Housing13 3.2500112 Shock Absorber14 1.3750037 10-32 Contact15 3.2500061 Top Sub 3.2500061-3 1/8 Top Sub16 3.2500060 Bottom Sub 3.2500060-3 1/8 Bottom Sub17 HOO0343 5/16” -18 x 3/8” Socket Set Screw, Alloy18 AS90021-1 3 1/4” CCL Coil & Magnet Assy (G)19 1.0172 1” CCL Upper Contact20 1.3750081 10–32 Spacer Contact21 3.2500110 CCL Lower Insulator22 3.2500107 CCL Upper Pole Piece23 HOO0431SS Ground Spring, S.S.24 OOV0229-95 Viton 95 O-Rings: 22925 1.3750067 1 3/8” Thread Protector, Box (Not Shown)26 KIT-90021* Complete Kit Assembly

*KIT-90021 Includes: 1.3750479 Contact Rod 10-32 x 11.687 3.2500109 CCL End Insulator 3.2500110 CCL Lower Insulator (5) HOO0004 4–40 x 1/8” Pan Hd. Screw, S.S. (3) HOO0431SS Ground Spring, S.S. SEM0069 Double Diode 1.0172 1” CCL Upper Contact 1.3750037 10-32 Contact 1.3750081 10–32 Spacer Contact LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1 5/8” - 6 ACME - 2G

18

15

21

24

16

8

7

12

10

13

3

6

11

3

23

7

8

6

22

13

4

5

2

14

19

251 3/16”-12 UN-2B

1

24

17

9

CASING COLLAR LOCATOR

Page 337: AES Catalog

SPECIFICATIONS

G-6<< Return to Section G Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATION AS90021

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

Tool diameter (O.D.) 3.250 in. (82.55 mm)Tool length 19.0 in. (482.6 mm)Tool weight 36.3 lbs (16.6 kg)Shipping length 20.5 in. (521.70 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 2400 - 2700 OhmsTop connection GO Type Female (1 3/16-12 UN)Bottom connection Quick Change Female ( 1 5/8”-6 ACME)Sensor measure point 9.375 in. (238.125 mm) from bottom of tool

3 1/4” Casing Collar Locator (Grounded)

The 3 1/4” Shooting Casing Collar Locator (Grounded) detects casing collars and perforations in tubing or casing.

Page 338: AES Catalog

COMPONENTS

G-7 << Return to Section G Menu << Return to Main Menu

3 1/8” Casing Collar Locator (Grounded)

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS90021-3 1/8 3 1/8” CCL Complete Assy (G) 2 3.2500109 CCL End Insulator 3 HOO0004 4–40 x 1/8” Pan Hd. Screw, S.S. 4 SEM0069 Double Diode 5 3.2500108 CCL Lower Pole Piece 6 3.2500058 CCL Magnet Spacer 7 3.2500042 CCL Magnet 8 3.2500055 Magnet Sleeve 9 PSA046 Coil Holder Assy (G)10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.3750479 Contact Rod 10-32 x 11.687 12 3.0045 CCL Housing13 3.2500112 Shock Absorber14 1.3750037 10-32 Contact15 3.2500061 Top Sub 3.2500061-3 1/8 Top Sub16 3.2500060 Bottom Sub 3.2500060-3 1/8 Bottom Sub17 HOO0343 5/16” -18 x 3/8” Socket Set Screw, Alloy18 AS90021-1 3 1/4” CCL Coil & Magnet Assy (G)19 1.0172 1” CCL Upper Contact20 1.3750081 10–32 Spacer Contact21 3.2500110 CCL Lower Insulator22 3.2500107 CCL Upper Pole Piece23 HOO0431SS Ground Spring, S.S.24 OOV0229-95 Viton 95 O-Rings: 22925 1.3750067 1 3/8” Thread Protector, Box (Not Shown)26 KIT-90021* Complete Kit Assembly

*KIT-90021 Includes: 1.3750479 Contact Rod 10-32 x 11.687 3.2500109 CCL End Insulator 3.2500110 CCL Lower Insulator (5) HOO0004 4–40 x 1/8” Pan Hd. Screw, S.S. (3) HOO0431SS Ground Spring, S.S. SEM0069 Double Diode 1.0172 1” CCL Upper Contact 1.3750037 10-32 Contact 1.3750081 10–32 Spacer Contact LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1 5/8” - 6 ACME - 2G

18

15

21

24

16

8

7

12

10

13

3

6

11

3

23

7

8

6

22

13

4

5

2

14

19

251 3/16”-12 UN-2B

1

24

17

9

CASING COLLAR LOCATOR

Page 339: AES Catalog

SPECIFICATIONS

G-8<< Return to Section G Menu << Return to Main Menu

CASING COLLAR LOCATOR

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools• Compatible with many surface systems• Depth Correlation• Can be run with perforating services and free point back off

3 1/8” Casing Collar Locator (Grounded)

The 3 1/8” Shooting Casing Collar Locator (Grounded) detects casing collars and perforations in tubing or casing.

SPECIFICATIONS AS90021-3 1/8Tool diameter (O.D.) 3.125 in. (79.38 mm)Tool length 19.04 in. (483.54 mm)Tool weight 33.6 lbs (15.059 kg)Shipping length 20.54 in. (521.72 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 2400 - 2700 OhmsTop connection GO Type Female (1 3/16-12 UN)Bottom connection Quick Change Female ( 1 5/8”-6 ACME)Sensor measure point 9.375 in. (238.125 mm) from bottom of tool

Page 340: AES Catalog

COMPONENTS

G-9 << Return to Section G Menu << Return to Main Menu

4 1/2” Casing Collar Locator Assembly Shooting

Ref. Part No. Description (G) Grounded, (NG) Non-Grounded 1 AS90080 4 1/2” Casing Collar Locator Assy Shooting2 3.2500109 Casing Collar Locator End Insulator 3 HOO0004 4-40 x 1/8” Pan Hd. Screw, S.S. 4 SEM0069 Diode Double 5 LAF00095 Casing Collar Locator Lower Pole Piece 6 3.2500058 Casing Collar Locator Magnet Spacer 7 LAF00094 Casing Collar Locator Magnet 8 LAF00093 Magnet Sleeve 9 PSA046 Coil Holder Assy (G)10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 2.0105 Contact Rod 10-32 x 11.687 12 LAF00098 Casing Collar Locator Housing13 3.2500112 Shock Absorber14 1.3750081 10-32 Contact15 LAF00096 Top Sub 3 1/4” LAF00096 Top Sub 3 1/4” Body16 LAF00097 4 1/2” Casing Collar Locator Bottom Sub GO QC LAF00097 4 1/2” Casing Collar Locator Bottom Sub GO QC Body17 HOO0343 5/16” -18 x 3/8” Socket Set Screw, Alloy18 AS90080-1 4 1/2” Casing Collar Locator Coil & Magnet Insert Shooting19 3.2500109 1” Casing Collar Locator Upper Contact20 1.3750081 10–32 Spacer Contact21 3.2500110 Casing Collar Locator Lower Insulator22 LAF00092 Casing Collar Locator Upper Pole Piece23 HOO0431SS Ground Spring, S.S.24 OOV0236-95 Viton 95 O-Rings: 23625 1.3750067 1 3/8” Thread Protector Box 26 KIT-90021* Complete Kit Assembly27 WIR1060 Wire, MAG 36 GAGE28 LAF00091 4 1/2” Coil Bobin

*KIT-90021 Includes: Contact Rod 10-32 x 11.687 3.2500109 CCL End Insulator 3.2500110 CCL Lower Insulator (5) HOO0004 4-40 x 1/8” Pan Hd. Screw, S.S. (3) HOO0431SS Ground Spring, S.S. SEM0069 Diode Double 3.2500109 1” CCL Upper Contact 1.3750081 10-32 Contact 10–32 Spacer Contact LBOO0032 Teflon® Tubing, #4 Thin WallDoes not include O-Rings

1 5/8” - 6 ACME - 2G

18

15

21

24

16

8

7

12

10

13

3

6

11

3

23

7

8

6

22

13

4

5

2

14

19

251 3/16”-12 UN-2B

1

24

17

27

9

28

CASING COLLAR LOCATOR

Page 341: AES Catalog

SPECIFICATIONS

G-10<< Return to Section G Menu << Return to Main Menu

CASING COLLAR LOCATOR

4 1/2” Casing Collar Locator Assembly Shooting

SPECIFICATIONS AS90080Tool diameter (O.D.) 4.5 in. (114.3 mm)Tool length 22.23 in. (564.64 mm)Tool weight 83.25 lbs (37.76 kg)Shipping length 28.25 in. (717.55 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 57,600 - 6,4800 OhmsTop connection Go TYPE Female (1 5/8” - 12 UN)Bottom connection Quick Change Female (1 5/8” - 6 ACME)Sensor measure point 10.5 in. (266.7 mm) from Bottom of Tool

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Depth Correlation• Can be run with free point back off

Page 342: AES Catalog

COMPONENTS

G-11 << Return to Section G Menu << Return to Main Menu

2 3/4” Casing Collar Locator Assembly

Ref. Part No. Description 1 AS90090 2 3/4” Casing Collar Locator Assy2 AS90090-1 CCL Coil & Magnet Insert 3 PSA141 CCL Coil Assy 2 3/4 AES 4 LAF00109 CCL Coil Holder 5 WIR1015 Wire, MAG, 36 Gage, HML6 WIR1060 AWG22, Teflon Green Wire 7 7500060 CCL Magnet 2 3/4” Log 8 LAF00108 CCL Lower Pole Piece 9 LAF00107 CCL Upper Pole Piece 10 HOO0605 1/4-28 X 3” Socket Head Cap Screw 11 3.2500112-1 CCL Washer Viton 75 Log 12 1.6870187 End Insulator 13 1.6870188 CCL Contact Receptacle 14 HOO0141 Set Screw 6-32 x 1/8” 15 SEM0069 Diode Double 16 1.6870189 Plunger Insulator 17 1.6870190 Contact Plunger 18 1.6870191 Plunger Washer19 HOO0254 Retainer Ring 20 1.6870019 CCL 1 11/16 Contact Top 21 HOO0141 Set Screw 6-32 x 1/8”22 2.0115 CCL Insulator 23 HOO0085 6-32 X 5/16” SKT. Set Screw 24 HOO0004 4-40 X 1/8” Pan HD Slotted S/S 25 HOO0126SS Ground Spring 26 LAF00105 CCL Bottom Sub27 OOV0227-95 Viton 95 O-Ring: 227 28 LAF00104 CCL Top Sub Assy 29 LAF00011 Contact Plunger 30 1.0086 Insulator Washer Beveled 31 1.0087A Contact Receptacle32 HOO0065 Retainer Ring 33 HOO0139 10-32 X 1” Pan Head Screw 34 OOV0227-95 Viton 95 O-Ring: 227 35 1.0037 Contact Spring 36 1.0041 Insulating Washer 37 1.0042 Plunger Insulator 38 LBOO0032 Teflon Tubing #4 Thin Wall 39 LAF00106 CCL Housing 40 1.3750067 Box Thread Protector

812

7

14

23

40

16

25

18

19

24

1

13

9

32

11

4

11

26

17

27

10

5

10

2122

29

36

36

31

28

33

37

34

39

15

6

7

40

30

35

2

CASING COLLAR LOCATOR

Page 343: AES Catalog

SPECIFICATIONS

G-12<< Return to Section G Menu << Return to Main Menu

CASING COLLAR LOCATOR

SPECIFICATIONS AS90090

2 3/4” Casing Collar Locator Assembly

Tool diameter (O.D.) 2.75 in. (69.9 mm)Tool length 20.7 in. (525.78 mm) Tool weight 33.1 lbs. (15.02 kg)Shipping length 23.7 in. (602 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Coil resistance (approx.) 3800 - 4300 OhmsTop connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)Sensor measure point 10.1 in. (256.54 mm) from bottom of tool

DESCRIPTION The casing collar locator (CCL) is a magnetic device which locates collars, joints, packers, centralizers, etc. The CCL detects changes in metal volume as it moves through casing or tubing. This happens when the field around the magnets is disturbed and induces a low frequency voltage in a coil mounted between the magnets. The signal is amplified and gated onto the wireline. A passive CCL is considered a non-powered CCL. It is recommend-ed to use a grounded coil CCL for perforating.

FEATURES • Location of casing or tubing damage• Confirmation of perforation depths or intervals• Simultaneous operation with other tools • Depth Correlation• Can be run with free point back off

Page 344: AES Catalog

COMPONENTS

G-13 << Return to Section G Menu << Return to Main Menu

DECENTRALIZERS

2” Magnetic Decentralizer

Button Type Magnet

Ref. Part No. Description 1 AS90045 2” Decentralizer 2 2.0102 Contact Sub Body 3 1.0086 Beveled Insulating Washer 4 1.0087A 10-32 Contact Receptacle 5 LBOO0032 Teflon® Tubing, #4 Thin Wall 6 2.0105 Contact Rod 10-32 x 13.625 7 HOO0317 Carbide Pads 8 HOO0279 Decentralizer Magnets 9 1.3750081 10-32 Contact Receptacle10 OOV0211-95 Viton 95 O-Rings: 211 11 LAF00011 Contact Plunger12 HOO0065 Retainer Ring, #5113 1.0041 Insulating Washer14 1.0037 Contact Spring15 1.0042 Contact Insulator16 2.0102-1 Locking Collar17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)18 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)19 KIT-60072* Complete Kit Assy20 LAF00128 Insulating Washer

*KIT-60072 Includes: 1.0037 Contact Spring 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0086 Beveled Insulating Washer 1.0087A 10-32 Contact Receptacle LAF00011 Contact Plunger 1.3750081 10-32 Contact Receptacle 2.0105 Contact Rod 10-32 x 13.625 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

1

10

16

18

7

2

17

7

7

8

4

3

6

96

5

14

20

12

15

11

8

5

19

1 3/16” - 12 UN - 2B

1 3/16” - 12 UN - 2A

13

Page 345: AES Catalog

SPECIFICATIONS

G-14<< Return to Section G Menu << Return to Main Menu

DECENTRALIZERS

SPECIFICATIONS AS90045

2” Magnetic Decentralizer

Button Type Magnet

Tool diameter (O.D.) 2 in. (50.8 mm)Tool length 16.125 in. (409.575 mm)Tool weight 14.5 lbs (6.58 kg)Shipping length 22 in. (558.8 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16-12 UN)Bottom connection Go TYPE Female ( 1 5/8”-6 ACME)

Page 346: AES Catalog

COMPONENTS

G-15 << Return to Section G Menu << Return to Main Menu

2” RTG Bottom Decentralizer

Button Type Magnet

Ref. Part No. Description 1 AS90071 2” Bottom Decentralizer 2 2.0108 Contact Sub Body 3 HOO0317 Carbide Pads 4 HOO0279 Magnets

1

2

3

4

3

3

4

DECENTRALIZERS

Page 347: AES Catalog

SPECIFICATIONS

G-16<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS90071

2” RTG Bottom Decentralizer

Button Type Magnet

Tool diameter (O.D.) 2 in. (50.8 mm)Tool length 16.5 in. (419.1 mm)Tool weight 12.68 lbs. (5.75 kg)Shipping length 22.5 in. (571.5 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)

DECENTRALIZERS

Page 348: AES Catalog

COMPONENTS

G-17 << Return to Section G Menu << Return to Main Menu

2 1/8” Magnetic Decentralizer Channel Type Magnet

Ref. Part No. Description 1 AS90003 2 1/8” Magnetic Decentralizer Complete Assy 2 KIT-60030* Contact Kit Assy 3 OOV0211-95 Viton 95 O-Rings: 211 4 2.0029 Adjustment Ring 5 2.0012 Magnet Clamp 6 HOO0117 10-32 x 1/2” Button Head Socket Set Screw, Alloy 7 1.3750459 Contact Rod 10-32 x 9.312 8 HOO0259 Magnet 9 2.0030 2 1/8” Decentralizer Body10 1.3750471 Channel Magnet Clamp Rod11 1.0086 Beveled Insulator12 1.0087A Contact Receptacle13 LAF00011 Contact Plunger14 HOO0065 Retainer Ring, #5115 1.0041 Insulating Washer16 1.0037 Contact Spring17 1.0042 Contact Insulator18 1.3750081 10-32 Contact Receptacle19 LBOO0032 Teflon® Tubing, #4 Thin Wall20 1.3750067 1 3/8” Thread Protector, Box (Not Shown)21 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)22 LAF00128 Insulating Washer

*KIT-60030 Includes: (2) 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0087A Brass Receptacle 1.3750459 Contact Rod 10-32 x 9.312 LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.0086 Beveled Insulator 1.3750081 10-32 Contact Receptacle LAF00128 Insulating WasherDoes not include O-Rings

1

2

3

13

4

7

5

6

10

8

5

6

12

9

11

1422

16

17

21

18

15

19

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

20

DECENTRALIZERS

Page 349: AES Catalog

SPECIFICATIONS

G-18<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS90003

2 1/8” Magnetic Decentralizer Channel Type Magnet

Tool diameter (O.D.) 2.125 in. (53.975 mm)Tool length 11.75 in. (298.45 mm)Tool weight 10.98 lbs (4.98 kg)Shipping length 17.75 in. (450.85 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16-12 UN)Bottom connection Go TYPE Female ( 1 5/8”-6 ACME)

DECENTRALIZERS

Page 350: AES Catalog

COMPONENTS

G-19 << Return to Section G Menu << Return to Main Menu

2” RTG Bottom DecentralizerChannel Type Magnet

Ref. Part No. Description 1 AS90043 2” Bottom Decentralizer Complete Assy 2 HOO0117 10-32 x 1/2” Button Head Socket Screw, Alloy 3 2.0012 2” Magnet Clamps 4 HOO0259 Channel Magnets 5 2.0094 2” Decentralizer Body 6 1.3750471 Channel Magnet Clamp Rod

1 5

4

6

2

3

2

3

DECENTRALIZERS

Page 351: AES Catalog

SPECIFICATIONS

G-20<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS90043

2” RTG Bottom DecentralizerChannel Type Magnet

Tool diameter (O.D.) 2 in. (50.8 mm)Tool length 11.375 in. (288.925 mm)Tool weight 9.24 lbs (4.19 kg)Shipping length 17.375 in. (441.325 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)

DECENTRALIZERS

Page 352: AES Catalog

COMPONENTS

G-21 << Return to Section G Menu << Return to Main Menu

CENTRALIZER

2 3/4” Spring Centralizer Ref. Part No. Description 1 AS90050 2 3/4” Centralizer Assy 2 KIT-90050* Complete Kit Assy 3 HOO0305 3/8” Socket Set Screw, Alloy 4 OOV0211-95 Viton 95 O-Rings: 211 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 1.0041 Insulating Washer 8 1.0042 Plunger Insulator 9 1.0037 Contact Spring10 1.3750081 10-32 Contact11 HOO0432 1 1/4” Spiral Roll Pin12 3052 Rotating Sleeve13 OMF0014 Centralizer Spring14 3053 Spring Collar15 2853 Centralizer Mandrel16 2863 Centralizer Mandrel17 2862 Adjustment Nut18 2845 Compressions Spring19 LBOO0032 Teflon® Tubing, #4 Thin Wall20 2931 Contact Rod 10-32 x 27.56221 1.0086 Beveled Insulator22 1.0087A Contact Receptacle23 2860 Adjustment Collar24 HOO0301SS 1/4” -20 x 1/2” Socket Head Cap Screw, S.S.25 2861 Adjustment Sleeve26 2864 Locking Ring27 1.3750067 1 3/8” Thread Protector, Box (Not Shown)28 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)29 LAF00128 Insulating Washer

*KIT-90050 Includes: 1.0037 Contact Spring 1.0042 Plunger Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00011 Contact Plunger 1.0041 Insulating Washer 1.0086 Beveled Insulator 1.0087A Brass Contact Receptacle 1.3750081 10-32 Contact 2931 Contact Rod 10-32 x 27.562 HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-RingsAlso available with sondex connections AS90050SDX OMF0014 7 3/4” Casing (14” springs) OMF0014-11 13 1/2” Casing (19” springs)

6

1

2

16

15

27

22

21

19

20

17

18

14

11

25

24

23

13

11

12

3

26

7

10

85

4

9

28

3

11

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

29

Page 353: AES Catalog

SPECIFICATIONS

G-22<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS90050

2 3/4” Spring Centralizer

Tool diameter (O.D.) 2.75 in. (69.85 mm)Tool length 30 in. (762 mm)Tool weight 31.8 lbs (4.19 kg)Shipping length 36 in. (914.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Bottom connection Go TYPE Male (1 3/16” - 12 UN) Min Diameter Casing 3 in. (76.2 mm)Max Diameter Casing (OMF0014 - 14in springs) 7.75 in. (196.85 mm)Max Diameter Casing (OMF014-19 - 19in springs) 13.5 in. (342.9 mm)

CENTRALIZERS

Page 354: AES Catalog

COMPONENTS

G-23 << Return to Section G Menu << Return to Main Menu

2 3/4” Roller CentralizerRef. Part No. Description 1 AS90050RA 2 3/4” Roller Centralizer 2 KIT-90050* Complete Kit Assy 3 HOO0305 3/8” Socket Set Screw, Alloy 4 OOV0211-95 Viton 95 O-Rings: 211 5 LAF00011 Contact Plunger 6 HOO0065 Retainer Ring, #51 7 1.0041 Insulating Washer 8 1.0042 Plunger Insulator 9 1.0037 Contact Spring10 1.3750081 10-32 Contact11 HOO0432 1 1/4” Spiral Roll Pin12 3052 Rotating Sleeve13 4624 Roller Centralizer Wheels14 3053 Spring Collar15 2853 Centralizer Mandrel16 2863 1/4” Spacer17 2862 Adjustment Nut18 2845-1 Compression Spring19 LBOO0032 Teflon® Tubing, #4 Thin Wall20 2931 Contact Rod 10-32 x 27.56221 1.0086 Beveled Insulator22 1.0087A Brass Contact Receptacle23 2860 Split Collar24 HOO0301SS 1/4” -20 x 1/2” Socket Head Cap Screw, S.S.25 2861 Adjustment Sleeve26 2864 Locking Ring27 4602-L Left Centralizer Arm28 4602-R Right Centralizer Arm29 4617-2 Locking Screw/Axle30 4964 Stopper31 HOO0046 10-32 x 1/8 Socket Set Screw, Alloy32 HOO0113 1/4-20 x 3/8 Socket Set Screw, Alloy33 4926 Grease Adapter Roller Centralizer (Not Shown)34 1.3750067 1 3/8” Thread Protector, Box (Not Shown)35 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)36 LAF00128 Insulating Washer

*KIT-90050 Includes: 1.0037 Contact Spring 1.0042 Plunger Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00011 Contact Plunger 1.0041 Insulating Washer 1.0086 Beveled Insulator 1.0087A Brass Contact Receptacle 1.3750081 10-32 Contact 2931 Contact Rod 10-32 x 27.562 HOO0065 Retainer Ring, #51 LAF00128 Insulating WasherDoes not include O-Rings

3

1127

11

12

26 3

79

35465

36

8

10

13

13 13

13

2930

2423

28

25

14

19

20

18

16

17

21

22

15

34

1

2

29 31

32

1 3/16”-12 UN-2A

1 3/16”-12 UN-2B

Available Options:

AS90050RASDX** (casing size 10 3/4” max, 4” min)

AS90050RA-16 for up to 16” casing(casing size 16” max, 6” min)

**Available with sondex connections

CENTRALIZER

Page 355: AES Catalog

SPECIFICATIONS

G-24<< Return to Section G Menu << Return to Main Menu

2 3/4” Roller Centralizer

SPECIFICATIONS AS90050RATool diameter (O.D.) 2.75 in. (69.85 mm)Tool length 30 in. (762 mm)Tool weight 37 lbs (16.78 kg)Shipping length 36 in. (914.4 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN) Bottom connection Go TYPE Male (1 3/16” - 12 UN) Min Diameter Casing 4 in. (101.6 mm)Max Diameter Casing 10.75 in. (273.05 mm)

CENTRALIZER

Page 356: AES Catalog

COMPONENTS

G-25 << Return to Section G Menu << Return to Main Menu

ACCESSORY

2 3/4” Quick Change Knuckle Joint(Pin To Box)Ref. Part No. Description 1 AS90066QC 2 3/4” Quick Change Knuckle Joint 2 5668 Knuckle Joint Top Sub 3 5669 Knuckle Joint Sub 4 5670 Knuckle Joint Ball Housing 5 5673 Knuckle Joint Ball 6 5674 Rotation Cup 7 5671 Knuckle Joint Sub 8 5672 Knuckle Joint Bottom Sub 9 HOO0065 Retainer Ring, #51 10 1.0041 Insulating Washer11 1.0086 Insulator Washer Beveled12 1.0087A Contact Receptacle13 OOV0227-95 Viton 95 O-Ring: 22714 OOV0222-95 Viton 95 O-Ring: 22215 1.6870003 Plunger Contact16 4660 Plunger Insulator17 1.0037-1 Spring18 HOO0252 10-32 x 3” Pan Head Screw19 2349 10-32 x 1.687 Contact Rod20 LBOO0032 Teflon® Tubing, #4 Thin Wall21 HOO0233 1/4” x 2” Roll Pin22 1.3750139 1 3/8” Slack Joint Cone Nut23 HOO0141 Set Screw 6-32 x 1/8”24 2642 Q. C. Thread Protector, Box (Not Shown)25 3.2500099 Q. C. Thread Protector, Pin (Not Shown)26 WIR1063 Wire (Proprietary)27 HOO0343 5/16”-18 x 3/8” Socket Set Screw, Alloy

KIT-90066QC Includes: (4) 1.0041 Insulating Washer 1.0086 Insulator Washer Beveled 1.0087A Contact Receptacle 4660 Plunger Insulator HOO0252 10-32 x 3” Pan Head Screw HOO0065 Retainer Ring, #51 (3) HOO0233 1/4” x 2” Roll Pin 1.0037-1 Spring 1.6870003 Plunger Contact (2) 1.3750139 1 3/8” Slack Joint Cone Nut LBOO0032 Teflon® Tubing, #4 Thin Wall HOO0141 Set Screw 6-32 x 1/8” WIR1063 Wire (Proprietory) 2349 10-32 x 1.687 Contact RodDoes not include O-RingsAlso available with GO PIN X Box AS90066

11

12

3

9

4

6

6

26

5

7

8

10

10

10

20

10

20

13

13

23

13

24

27

23

25

14

19

16

18

17

21

22

22

15

1

2

1 5/8”- 6 ACME - 2 G

1 5/8”- 6 ACME - 2 G

Page 357: AES Catalog

SPECIFICATIONS

G-26<< Return to Section G Menu << Return to Main Menu

ACCESSORY

2 3/4” Quick Change Knuckle Joint(Pin To Box)

SPECIFICATIONS AS90066QCTool diameter (O.D.) 2.75 in. (69.85 mm)Tool length 22.125 in. (561.975 mm)Tool weight 33.90 lbs. (15.377 kg)Shipping length 28.125 in. (714.375 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME) Bottom connection Quick Change Female (1 5/8” - 6 ACME) Angle of Bend 15° (per side)

Page 358: AES Catalog

COMPONENTS

G-27 << Return to Section G Menu << Return to Main Menu

3 1/8” Conductor Swivel Assembly

Ref. Part No. Description 1 AS100012QC-1 3 1/8” AES Swivel 2 5092 3 1/8” Swivel Bottom Sub 3 4075-1 Swivel Top Sub Body 4 3007 Insulator 5 3005 Contact Insulator 6 3006 Contact Receptacle 7 CON0009 Connector 8 3029-1 Retainer Ring 9 CON0061 Kemlon Connector10 HOO0343 5/16-18 x 3/8” Socket Set Screw11 OOV0228-95 Viton 95 O-Ring: 228 12 4050 Bearing Housing13 4051 Boot Sub14 4052 Boot Protector15 4065 Swivel Shaft16 HOO0459-1 Thrust Bearings17 HOO0459-2 Thrust Washer18 HOO0500 Roller Bearing19 OOV0228-95 Viton 95 O-Ring: 228 V9520 BOO0108 Rubber Boot21 5852 Boot End Sub22 4094 Split Spacer23 OOV0218 Viton 75 O-Ring: 218 24 OOV0213-95 Viton 95 O-Ring: 213 25 HOO0301 1/4” Socket Set Screw, Alloy26 5150 Sealed Kemlon Holder27 OOV0014-95 Viton 95 O-Rings: 014 V9528 4090 Swivel Top Insulator29 4655-1 Contact Rod Assy30 CON0011 Spring Loaded Contact31 5663 Insulator32 CON0061AMOD Modified CON0061A33 5155 Contact Insulator34 5156 Contact for CON0061AMOD35 HOO0555 1/16 x 0.500 Dowel Pin, S.S.36 8299 Oil Filler Plug37 OOV0010-95 Viton 95 O-Ring: 010 38 4075-1 3 1/8” Swivel Mandrel Connector39 1.0041 Insulating Washer40 1.0037-1 Spring41 4660 Plunger Insulator42 HOO0065 Retainer Ring, #5143 1.6870003 Plunger Contact44 PSA019 Brass Contact Assy45 BOO0096 Teflon® Tubing, #8 Thin Wall 1046 CON0009 Connector47 OOV0222-95 Viton 95 O-Ring: 222 48 3.2500099 Thread Protector, Box (Not Shown)49 2642 Thread Protector, Pin (Not Shown)

KIT-100012QC (Kit List Not Shown)Does not include O-Rings

20

21

22

23

32

9

11

10

15

16 17

35

8

48

27

3

26

29

28

39

4044

4249

43

47

6

5

2

13

14

1

41

4

25

19

18

12

31

41

24

ACCESSORY

Page 359: AES Catalog

SPECIFICATIONS

G-28<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS100012QC-1

3 1/8” Conductor Swivel Assembly

ACCESSORY

Tool diameter (O.D.) 3.125 in. (79.375 mm)Tool length 28.156 in. (715.162 mm) Tool weight 58 lbs. (26.308 kg)Shipping length 43 in. (1092.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change BOX (1 5/8” - 6 ACME)Bottom connection Quick Change Pin (1 5/8” - 6 ACME)

Page 360: AES Catalog

COMPONENTS

G-29 << Return to Section G Menu << Return to Main Menu

1 3/4” Wireline Skate, 2.125” Drift

Ref. Part No. Description 1 AS90053 1 3/4” Wireline Skate, 2.125” Drift 2 KIT-50032* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 1.7500059 Skate Body12 1.6870389 Contact Rod 10-32 x 9.56213 1.0086 Insulating Washer14 1.0087A Contact Receptacle15 3390 Skate Wheel16 HOO0424 3/16” x 3/4” Spiral Roll Pin17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)18 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)19 LAF00128 Insulating Washer

*KIT-50032 Includes: 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0086 Insulating Washer 1.3750081 10-32 Contact Receptacle 1.6870389 Contact Rod 10-32 x 9.562 HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.0087A Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings

19

1

2

5

4

7

9

6

10

16

15

16

12

13

14

11

17

3

8

18

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

ACCESSORY

Page 361: AES Catalog

SPECIFICATIONS

G-30<< Return to Section G Menu << Return to Main Menu

1 3/4” Wireline Skate, 2.125” Drift

SPECIFICATIONS AS90053Tool diameter (O.D.) 1.75 in. (44.45 mm)Tool length 12 in. (304.8 mm)Tool weight 8 lbs. (3.63 kg)Shipping length 18 in. (457.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN) Drift Diameter 2.125 in. (53.975 mm)

ACCESSORY

Page 362: AES Catalog

COMPONENTS

G-31 << Return to Section G Menu << Return to Main Menu

2 1/16” Wireline Skate, 2.625” Drift

Ref. Part No. Description 1 AS90054 2 1/16” Wireline Skate, 2.625” Drift 2 KIT-50032* Complete Kit Assy 3 LAF00011 Contact Plunger 4 HOO0065 Retainer Ring, #51 5 OOV0211-95 Viton 95 O-Rings: 211 6 1.0041 Insulating Washer 7 1.0042 Contact Insulator 8 1.0037 Contact Spring 9 1.3750081 10-32 Contact Receptacle10 LBOO0032 Teflon® Tubing, #4 Thin Wall11 2.0120 Skate Body12 1.6870389 Contact Rod 10-32 x 9.56213 1.0086 Insulating Washer14 1.0087A Contact Receptacle15 3428 Skate Wheel16 HOO0424 3/16” x 3/4” Spiral Roll Pin17 1.3750067 1 3/8” Thread Protector, Box (Not Shown)18 1.3750068 1 3/8” Thread Protector, Pin (Not Shown)19 LAF00128 Insulating Washer

*KIT-50032 Includes: 1.0041 Insulating Washer 1.0042 Contact Insulator 1.0086 Insulating Washer 1.3750081 10-32 Contact Receptacle 1.6870389 Contact Rod 10-32 x 9.562 HOO0065 Retainer Ring, #51 LAF00011 Contact Plunger 1.0037 Contact Spring 1.0087A Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall LAF00128 Insulating WasherDoes not include O-Rings

19

1

2

5

4

7

9

6

10

16

15

16

12

13

14

11

17

3

8

18

1 3/16”-12 UN-2B

1 3/16”-12 UN-2A

ACCESSORY

Page 363: AES Catalog

SPECIFICATIONS

G-32<< Return to Section G Menu << Return to Main Menu

2 1/16” Wireline Skate, 2.625” Drift

SPECIFICATIONS AS90054Tool diameter (O.D.) 2.062 in. (52.375 mm)Tool length 12 in. (304.8 mm)Tool weight 11.1 lbs. (5.035 kg)Shipping length 18 in. (457.2 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN) Bottom connection Go TYPE Female (1 3/16” - 12 UN) Drift Diameter 2.625 in. (66.75 mm)

ACCESSORY

Page 364: AES Catalog

COMPONENTS

G-33 << Return to Section G Menu << Return to Main Menu

2 1/8” Shock Tool500° Temp • Pressure Rating-21,000 psi • Tensile Strength-55,000 lbs • Compression Rating-350 lbs

Ref. Part No. Description 1 AS90065 2 1/8” Shock Absorber Complete Assy 2 5506 2 1/8” Shock Tool Top Sub 3 5500 2 1/8” Shock Tool Housing 4 5501 2 1/8” Shock Tool Sub 5 5498 2 1/8 Shock Sub Mandrel 6 5507 2 1/8” Shock Tool Bottom Sub 7 1.3750055M Spring 8 5503 Washer, Spacer 9 HOO0065 Retainer Ring, #5110 1.0041 Insulating Washer 11 1.0042 Contact Insulator 12 1.0033 Contact Plunger13 1.0037 Contact Spring14 PSA024 Universal Contact Sub Assy15 3005 Contact Insulator16 3007 Insulator17 3029-1 Retainter Ring18 CON0012A Pressure Connector19 PSA099 3 1/8” Shock Sub Boot Assy20 5101 Retainer Sleeve21 PSA118 Pre Sub Assy22 OOV0211-95 Viton 95 O-Ring: 211 23 OOV0117-95 Viton 95 O-Ring: 11724 OOV0130-95 Viton 95 O-Ring: 130 25 1.3750067 1 3/8” Thread Protector, Box26 1.3750068 1 3/8” Thread Protector, Pin27 3006 Contact Receptacle28 PSA119 Pre Sub Assy29 HOO0498 10-32 x 3/8” SocketHD Cap Screw30 HOO0527 1/4-28 x 3/16” Socket Set Screw

23

26

7

1022

6

18

21

27

20

28

2930

19

16

14

25

24

12

11

213

17

15

3

5

4

9

81

* KIT-90065CPLT Includes HOO0065 Retainer Ring, # 55 (2) 1.0041 Insulating Washer 1.0042 Plunger Insulator LAF00011 Contact Plunger (2) HOO0527 1/4”-28 x 3/16” Sockett Set Screw PSA024 Universal Contact Sub Assy 3005 Contact Insulator 3006 Contact Receptacle 3007 Insulator (2) CON0012A Pressure Connector PSA099 Pressure Connector Assy PSA118 Pre Sub Assy (3) OOV0211-95 Viton 95 O-Ring: 211 (2) OOV0117-95 Viton 95 O-Ring: 117 (4) OOV0130-95 Viton 95 O-Ring: 130 PSA119 Pre Sub Assy 1.0037 Contact Spring

ACCESSORY

Page 365: AES Catalog

SPECIFICATIONS

G-34<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS90065

2 1/8” Shock Tool500° Temp • Pressure Rating-21,000 psi • Tensile Strength-55,000 lbs • Compression Rating-350 lbs

Tool diameter (O.D.) 2.125 in. (53.975 mm)Tool length 18.725 in. (475.615 mm)Tool weight 15.38 lbs. (6.976 kg)Shipping length 24.725 in. (628.015 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16-12 UN)Bottom connection Go TYPE Female ( 1 5/8”-6 ACME)

ACCESSORY

Page 366: AES Catalog

COMPONENTS

G-35 << Return to Section G Menu << Return to Main Menu

2 3/4” Shock Absorber Sub500º Temp • Pressure Rating-21,000 psi • Tensile Strength-60,000 lbs • Compression Rating-850 lbs

Ref. Part No. Description 1 AS90062HDQC 2 3/4” Shock Absorber Complete Assy 2 8286 Bottom Sub 3 8288 Shock Sub Mandrel 4 8287 Shock Sub Housing 5 5065 Spring 6 8289 Shock Sub Adapter 7 8290 Top Sub 8 HOO0065 Retainer Ring, #51 9 1.0041 Insulating Washer 10 1.7500028 Brass Plunger11 4660 Plunger Insulator12 PSA024 Universal Contact Sub Assy13 1.0037-1 Spring14 PSA098-1 Pres Sub Assy for 3 1/8” Shock Tool15 CON0107 Kemlon Connector16 5101 Retainer Sleeve17 PSA099 3 1/8” Shock Sub Boot Assy18 PSA090-1 Pre Sub Assy19 1.6870003 Plunger Contact20 OOV0228-95 Viton 95 O-Ring: 22821 OOV0222-95 Viton 95 O-Ring: 22222 HOO0498 10-32 x 3/8” SocketHD Cap Screw, S.S.23 HOO0343 5/16-18 x 3/8” Socket Set Screw, Alloy24 HOO0527 1/4-28 x 3/16” Socket Set Screw, Alloy25 OOV0117-95 Viton 95 O-Rings: 11726 3.2500099 Quick Change Thread Protector, Box (Not Shown)27 2642 Quick Change Thread Protector, Pin (Not Shown)

23

26

7

10

22

6

18

21

27

20

20

19

16

16

14

25

24 12

12

11

11

2

13

13

17

15

15

3

5

4

9

8

1

1 5/8” - ACME - 2G

1 5/8” - ACME - 2G

ACCESSORY

Page 367: AES Catalog

SPECIFICATIONS

G-36<< Return to Section G Menu << Return to Main Menu

SPECIFICATIONS AS90062HDQC

2 3/4” Shock Absorber Sub500º Temp • Pressure Rating-21,000 psi • Tensile Strength-60,000 lbs • Compression Rating-850 lbs

Tool diameter (O.D.) 2.75 in. (69.85 mm)Tool length 22.687 in. (576.25 mm)Tool weight 32.24 lbs. (14.62 kg)Shipping length 28.687 in. (728.649 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Quick Change Female ( 1 5/8”- 6 ACME)

ACCESSORY

Page 368: AES Catalog

COMPONENTS

G-37 << Return to Section G Menu << Return to Main Menu

3 1/8” Shock Absorber Sub500º Temp • Collapse-21,000 psi • Tensile Strength-75,000 lbs • Compression Rating-460 lbs

Ref. Part No. Description 1 AS100013HD 3 1/8” Shock Absorber Complete Assy 2 8280 3 1/8” Shock Tool Bottom Sub 3 8281 3 1/8” Shock Tool Mandrel 4 8282 3 1/8” Shock Tool Spring Housing 5 2845-1 Spring 6 8283 3 1/8” Shock Tool Top Sub 7 8284 3 1/8” Shock Tool Makeup Sub 8 5101 Retainer Sleeve 9 1.0041 Insulating Washer 10 HOO0065 Retainer Ring, #5111 4660 Plunger Insulator12 CON0107 Kemlon Connector13 PSA098-1 Pres Sub Assy for 3 1/8” Shock Tool14 OOV0222-95 Viton 95 O-Ring: 222 15 OOV0230-95 Viton 95 O-Ring: 230 16 1.0037-1 Spring17 1.7500028 Brass Plunger18 PSA024 Universal Contact Sub Assy19 OOV0125-95 Viton 95 O-Ring: 125 20 PSA099 3 1/8” Shock Sub Boot Assy21 1.6870003 Plunger Contact22 PSA090-1 Pre Sub Assy23 HOO0498 10-32 x 3/8” SocketHD Cap Screw, S.S.24 HOO0527 1/4-28 x 3/16” Socket Set Screw, Alloy25 HOO0343 5/16-18 x 3/8” Socket Set Screw, Alloy26 3.2500099 Quick Change Thread Protector, Box (Not Shown)27 2642 Quick Change Thread Protector, Pin (Not Shown)

10

10

11

1116

16

17

1

247

22

20

21

23

2312

12

18

15

15

14

13

9

9

8

2

5

6

3 4

25

19

26

27 1 5/8”-6 Stub ACME

1 5/8”-6 Stub ACME

ACCESSORY

Page 369: AES Catalog

SPECIFICATIONS

G-38<< Return to Section G Menu << Return to Main Menu

ACCESSORY

SPECIFICATIONS AS100013HD

3 1/8” Shock Absorber Sub500º Temp • Collapse-21,000 psi • Tensile Strength-75,000 lbs • Compression Rating-460 lbs

Tool diameter (O.D.) 3.125 in. (79.375 mm)Tool length 22.687 in. (576.25 mm)Tool weight Available upon requestShipping length 28.687 in. (728.649 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Quick Change Female ( 1 5/8”-6 ACME)

Page 370: AES Catalog

COMPONENTS

G-39 << Return to Section G Menu << Return to Main Menu

2 7/8” Conductor Swivel Assembly

Ref. Part No. Description 1 AS100012-2 7/8 2 7/8” AES Swivel 2 4075-2 7/8 2/78” Swivel Bottom Sub 3 4049-2 7/8 Swivel Top Sub Body 4 3007 Insulator 5 3005 Contact Insulator 6 3006 Contact Receptacle 7 CON0009 Connector 8 3029-1 Retainer Ring 9 CON0061 Kemlon Connector10 OOV0228-95 Viton 95 O-Ring: 228 11 4050-2 7/8 Bearing Housing12 4051-2 7/8 Boot Sub13 4052-2 7/8 Boot Protector14 4065 Swivel Shaft15 HOO0459-1 Thrust Bearings16 HOO0459-2 Thrust Washer17 HOO0500 Roller Bearing18 OOV0228-95 Viton 95 O-Ring: 228 19 BOO0108 Rubber Boot20 5852 Boot End Sub21 4094 Split Spacer22 OOV0218 Viton 75 O-Ring: 218 23 OOV0213-95 Viton 95 O-Ring: 213 24 HOO0301 1/4” Socket Set Screw, Alloy25 5150 Sealed Kemlon Holder26 OOV0014-95 Viton 95 O-Rings: 014 27 4090 Swivel Top Insulator28 4655-1 Contact Rod Assembly29 CON0011 Spring Loaded Contact30 5663 Insulator31 CON0061AMOD Modified CON0061A32 5155 Contact Insulator33 5156 Contact for CON0061AMOD34 HOO0555 1/16 x 0.500 Dowel Pin, S.S.35 8299 Oil Filler Plug36 OOV0010-95 Viton 95 O-Ring: 010 37 1.0041 Insulating Washer38 1.0037-1 Spring39 LAF00128 Plunger Insulator40 HOO0065 Retainer Ring, #5141 LAF00011 Plunger Contact42 PSA024 Brass Contact Assy43 BOO0096 Teflon® Tubing, #8 Thin Wall 1044 CON0009 Connector45 OOV0222-95 Viton 95 O-Ring: 222 46 1.3750068 Thread Protector, Box (Not Shown)47 1.3750067 Thread Protector, Pin (Not Shown)

KIT-100012 (Kit List Not Shown)Does not include O-Rings

19

20

21

18

22

23

31

14

16

17

34

8

46

26

3

25

28

27

38

40 41

45

6

5

24

2

12

13

1

39

4

37

30

11

10

15

47

3942

9

ACCESSORY

Page 371: AES Catalog

SPECIFICATIONS

G-40<< Return to Section G Menu << Return to Main Menu

ACCESSORY

2 7/8” Conductor Swivel Assembly

SPECIFICATIONS AS100012-2 7/8Tool diameter (O.D.) 2.875 in. (73.025 mm)Tool length 2.615 in. (664.21 mm)Tool weight Available upon requestShipping length 8.615 in. (218.821 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Male (1 3/16” - 12 UN)Bottom connection Go TYPE Female (1 3/16” - 12 UN)

Page 372: AES Catalog

COMPONENTS

G-41 << Return to Section G Menu << Return to Main Menu

ADAPTOR

3 1/4” Quick Change Assembly (GO Type)(Also Available in 3 1/8”)Ref. Part No. Description 1 AS90028* 3 1/4” Quick Change Assy AS90028LC** Crossover Assy 2 KIT-90028LR*** Complete Kit Assy KIT-90028WR**** Complete Kit Assy 3 3.2500047 Quick Change Collar 4 3.2500068 Detonator Block 5 3.2500049A Insulating Washer 6 1.0037 Contact Spring 7 HOO0296 5/16”-24 Hex Nut, S.S. 8 3.2500051 Insulating Washer 9 OOV0222-95 Viton 95 O-Rings: 222 10 HOO0253 Retainer Ring11 LBOO0097 Teflon® Tubing, 3/8” Thin Wall12 3.2500050 Contact Rod13 1.0033 Contact Plunger14 3.2500052 Insulating Washer15 OOV0211-95 Viton O-Rings: 211 16 OOV0114-95 Viton O-Rings: 114 17 3.2500048 Crossover Sub Body18 3.2500049B Contact Insulator19 OOV0224-95 Viton O-Rings: 224 *Excludes Detonator Block**Excludes Collar and Detonator Block

***KIT-90028LR Includes: LAF00011 Contact Plunger 3.2500049B Contact Insulator OOV0114-95 Viton O-Rings: 114 1.0037 Contact Spring 3.2500049A Insulating Washer 3.2500051 Insulating Washer 3.2500052 Insulating Washer HOO0253 Retainer Ring HOO0296 5/16”-24 Hex Nut, S.S. OOV0211-95 Viton 95 O-Rings: 211 LBOO0097 Teflon® Tubing, 3/8” Thin WallDoes not include Contact Rod

****KIT-90028WR Includes: KIT-90028LR Complete Kit Assy (See Above) 3.2500050 Contact Rod

1

2

2 3/4”- 6 ACME - 2G

1 5/8”- 6 ACME - 2G

8

18

13

10

5

6

9 7

8

17

11

19 9

3

15

14

16

12

4

Page 373: AES Catalog

SPECIFICATIONS

G-42<< Return to Section G Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS90028

3 1/4” Quick Change Assembly (GO Type)(Also Available in 3 1/8”)

Tool diameter (O.D.) 3.25 in. (82.55 mm)Tool length 11.8 in. (299.72 mm)Tool weight 12.75 lbs (5.78 kg)Shipping length 17.8 in. (452.12 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Quick Change Bell Female ( 2 1/4”-6 ACME)

Page 374: AES Catalog

COMPONENTS

G-43 << Return to Section G Menu << Return to Main Menu

3 1/8” Quick Change Assembly (SIE Type)

Ref. Part No. Description 1 AS90029 3 1/8” Quick Change Assy 2 KIT-90029* Complete Kit Assy AS90029-LC Complete Crossover Assy** 3 OOV0217-95 Viton 95 O-Rings: 217 4 3.2500041 Contact Receptacle 5 3.2500051 Insulating Washer 6 3.2500036 Viton Rubber Washer 7 BOO0035 Teflon® Tubing, 5/16 x .015 8 3.2500037 Contact Thru Rod 9 3.2500006 Quick Change Crossover Sub10 3.2500034 Cup Washer11 CON0024 Banana Plug12 PSA025 Bijou Contact Assy13 3.2500003 Quick Change Collar14 3.2500033 Bijou Insulator*Does not include O-Rings nor Crossover Sub** Excludes Collar and Detonator Block

*KIT-90029 Includes 3.2500034 Cup Washer (2) 3.2500036 Viton Rubber Washer (2) 3.2500051 Insulating Washer 3.2500033 Bijou Insulator 3.2500037 Contact Thru Rod 3.2500041 Brass Contact Receptacle BOO0035 Teflon® Tubing, 5/16 x .015 PSA025 Bijou Contact AssyDoes not include O-Rings 1

2

4

3

5

6

7

8

11

13

12

1 5/8” - 12 UN - 2A

2 3/8”- 6 ACME - 2G

5

6

ADAPTOR

Page 375: AES Catalog

SPECIFICATIONS

G-44<< Return to Section G Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS90029

3 1/8” Quick Change Assembly (SIE Type)

Tool diameter (O.D.) 3.125 in. (79.375 mm)Tool length 8.02 in. (203.7 mm)Tool weight 11.5 lbs (5.22 kg)Shipping length 14.02 in. (356.108 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection SIE Quick Change Male (1 5/8” - 12 UN)Bottom connection Quick Change Bell Female ( 2 3/4”-6 ACME)

Page 376: AES Catalog

COMPONENTS

G-45 << Return to Section G Menu << Return to Main Menu

2 1/2” GO Quick Change Box To GO Box

Ref. Part No. Description 1 AS70013 2 1/2” GO Quick Change Box to GO Box 2 KIT-70013* Contact Kit Assy 3 1.3750451 Contact Rod 10-32 X 2” 4 LBOO0032 Teflon® Tubing, #4 Thin Wall 5 1.0086 Beveled Insulating Washer 6 1.0087A 10-32 Contact Receptacle 7 2.0117 Contact Sub Body 8 HOO0493 5/16”-18 x 1/4” Socket Set Screw, Alloy

*KIT-70013 Includes: (2) 1.0086 Beveled Insulating Washer (2) 1.0087A 10-32 Contact Receptacle LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750451 Contact Rod 10-32 X 2”Does not include O-Rings

1

2

6

6

5

5

4

3

7

8

1 5/8”- 6 ACME - 2G

1 3/16” - 12 UN - 2B

ADAPTOR

Page 377: AES Catalog

SPECIFICATIONS

G-46<< Return to Section G Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS70013

2 1/2” GO Quick Change Box To GO Box

Tool diameter (O.D.) 2.5 in. (63.5 mm)Tool length 7.6 in. (193.04 mm)Tool weight Available upon requestShipping length 13.6 in. (345.44 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Go TYPE Female (1 3/16” - 12 UN)Bottom connection Quick Change Female ( 1 5/8”-6 ACME)

Page 378: AES Catalog

COMPONENTS

G-47 << Return to Section G Menu << Return to Main Menu

1 3/4” Double Quick Change Pin

Ref. Part No. Description 1 AS70007 1 3/4” Double Quick Change Pin Assy 2 KIT-70007* Complete Kit Assy 3 1.7500055 1 3/4” Double Quick Change Pin 4 1.0214 Contact Plunger 5 HOO0065 Retainer Ring, #51 6 1.0041 Insulating Washer 7 1.3750492 Plunger Insulator 8 1.0037 Contact Spring 9 OOV0222-95 Viton 95 O-Rings: 222 10 1.3750081 10-32 Contact11 1.6870278 Contact Rod 10-32 x 2.187

KIT-70007 Includes: (2) 1.0037 Contact Spring (2) 1.3750081 10-32 Contact (2) 1.0041 Insulating Washer (2) 1.0214 Contact Plunger 1.3750492 Plunger Insulator (2) HOO0065 Retainer Ring, #51 1.6870278 Contact Rod 10-32 x 2.187Does not include O-Rings

2

1

6

4

5

9

7

11

9

10

10

8

5

46

1 5/8”-6 ACME-2G

1 5/8”-6 ACME-2G

3

ADAPTOR

Page 379: AES Catalog

SPECIFICATIONS

G-48<< Return to Section G Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS70007

1 3/4” Double Quick Change Pin

Tool diameter (O.D.) 1.75 in. (44.45 mm)Tool length 1.58 in. (40.132 mm)Tool weight 3.33 lbs (1.51 kg)Shipping length 7.58 in. (192.532 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Quick Change Male (1 5/8” - 6 ACME)

Page 380: AES Catalog

COMPONENTS

G-49 << Return to Section G Menu << Return to Main Menu

1 3/4” 3 1/4” GO Quick Change Pin To 1 7/16” GO Pin

1 3/4” 3 1/4” GO Quick Change Pin To 1 7/16” GO Tear Drop

1 3/4” 3 1/4” GO Quick Change Pin To 1 7/16” GO Box

Ref. Part No. Description 1 AS70002 1 3/4” 3 1/4” GO Quick Change Pin to 1 7/16” GO Pin Assy 2 AS70003 1 3/4” 3 1/4” GO Quick Change Pin to 1 7/16” GO Tear Drop Assy 3 AS70004 1 3/4” 3 1/4” GO Quick Change Pin to 1 7/16” GO Box Assy 4 KIT-70002* Complete Kit Assy 5 KIT-70003** Complete Kit Assy 6 KIT-70004*** Complete Kit Assy 7 1.0214 Contact Plunger 8 HOO0065 Retainer Ring, #51 9 1.0041 Insulating Washer10 OOV0222-95 Viton 95 O-Rings: 222 11 1.0087A 10-32 Contact Receptacle12 1.7500054 Contact Insulator13 1.0037 Contact Spring14 OOV0211-95 Viton 95 O-Rings: 21115 LAF00011 Contact Plunger16 1.0042 Contact Insulator17 LBOO0032 Teflon® Tubing, #4 Thin Wall18 1.3750536 10-32 Contact Rod19 1.0086 Beveled Insulating Washer20 1.3750030 Tear Drop Cone Nut21 HOO0024 Contact Rod 10-32 x 2 1/4 Pan Head Screw, S.S.22 1.7500005 Contact Sub Body23 1.7500006 Contact Sub Body24 1.7500007 Contact Sub Body25 1.3750081 10-32 Contact26 LAF00128 Insulating Washer

*KIT-70002 Includes: 1.0214 Contact Plunger (2) HOO0065 Retainer Ring, #51 1.0041 Insulating Washer 1.7500054 Contact Insulator (2) 1.0037 Contact Spring LAF00011 Contact Plunger LAF00128 Insulating WasherDoes not include O-Rings

**KIT-70003 Includes: 1.0214 Contact Plunger HOO0065 Retainer Ring, #51 (3) 1.0041 Insulating Washer 1.0037 Contact Spring 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall 1.3750030 Tear Drop Cone Nut 1.3750536 10-32 Cone Nut 1.3750081 10-32 ContactDoes not include O-Rings

***KIT-70004 Includes: 1.0214 Contact Plunger HOO0065 Retainer Ring, #51 (2) 1.0041 Insulating Washer 1.0087A 10-32 Contact Receptacle 1.0037 Contact Spring 1.0042 Contact Insulator LBOO0032 Teflon® Tubing, #4 Thin Wall 1.0086 Beveled Insulating Washer HOO0024 Contact Rod 10-32 x 2 1/4 Pan Head Screw, S.S.Does not include O-Rings

1

4

22

78

9

10

13

12

13

25

25

14

26158

1 5/8”-6 ACME - 2G

1 3/16”-12 UN - 2A

2

23

9

20

18

17

9

13

10

16

9

78

5

3

6

8 79

10

16

13

9

17

21

19

11

1 5/8”-6 ACME - 2G

1 3/16”-12 UN - 2A

1 3/16”-12 UN - 2B

1 5/8”-6 ACME - 2G

ADAPTOR

Page 381: AES Catalog

SPECIFICATIONS

G-50<< Return to Section G Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS70004

1 3/4” 3 1/4” GO Quick Change Pin To 1 7/16” GO Pin

1 3/4” 3 1/4” GO Quick Change Pin To 1 7/16” GO Tear Drop

1 3/4” 3 1/4” GO Quick Change Pin To 1 7/16” GO Box

Tool diameter (O.D.) 1.75 in. (44.45 mm)Tool length 3.925 in. (99.7 mm)Tool weight 3.35 lbs (1.52 kg)Shipping length 9.925 in. (252.095 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Go TYPE Female (1 3/16” - 12 UN))

SPECIFICATIONS AS70003Tool diameter (O.D.) 1.75 in. (44.45 mm)Tool length 2.075 in. (52.705 mm)Tool weight 2.81 lbs (1.27 kg)Shipping length 8.075 in. (205.105 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Go TYPE Tear Drop (1 3/16” - 12 UN)

SPECIFICATIONS AS70002Tool diameter (O.D.) 1.75 in. (44.45 mm)Tool length 5.33 in. (135.382 mm)Tool weight 3.75 lbs (1.7 kg)Shipping length 11.33 in. (287.782 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Quick Change Male (1 5/8” - 6 ACME)Bottom connection Go TYPE Male (1 3/16” - 12 UN)

AS70002

AS70003

AS70004

Page 382: AES Catalog

COMPONENTS

G-51 << Return to Section G Menu << Return to Main Menu

2” RTG Tandem Sub2” RTG Bottom Adaptor Sub2” RTG Bull Plug2” RTG Top SubRef. Part No. Description 1 AS90031* 2” RTG Tandem Sub Assy 2 AS90042* 2” RTG Bottom Adaptor Sub Assy 3 AS90033* 2” RTG Bull Plug Assy 4 AS90032* 2” RTG Top Sub Assy 5 OOV0220-95 O-Ring: 220 V95 6 HOO0273 1/4-20 x 1/4” Socket Head Cap Screw, Alloy 7 HOO0274 5/16-18 x 1/4” Socket Head Cap Screw, Alloy 8 OOV0219-95 Viton 95 O-Ring: 219*Does not include Cap Screws (Order Separately)

6

8

7

7

8

1

4

6

5

7

3

5

7

6

2

1 3/16” - 12 UN - 2B

ADAPTOR

Page 383: AES Catalog

SPECIFICATIONS

G-52<< Return to Section G Menu << Return to Main Menu

ADAPTOR

2” RTG Tandem Sub2” RTG Bottom Adaptor Sub2” RTG Bull Plug2” RTG Top Sub

SPECIFICATIONS AS90031 AS90042Tool diameter (O.D.) 2 in. (50.8 mm) 2 in. (50.8 mm)Tool length .5 in. (12.7 mm) 10.625 in. (269.875 mm)Tool weight 2.66 lbs. (1.208 kg) 6.21 lbs. (2.815 kg)Shipping length 5.5 in. (139.7 mm) 13.625 in. (346.075 mm)Temperature rating 500°F (260°C) 500°F (260°C) Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection RTG Bolt TYPE Male RTG Bolt TYPE MaleBottom connection RTG Bolt TYPE Male RTG Bolt TYPE Female

SPECIFICATIONS AS90033 AS90032 Tool diameter (O.D.) 2 in. (50.8 mm) 2 in. (50.8 mm)Tool length 1.625 in. (41.275 mm) 5.50 in. (139.7 mm)Tool weight 2.30 lbs. (1.044 kg) 4.93 lbs. (2.238 kg)Shipping length 5.625 in. (142.875 mm) 10.50 in. (266.7 mm)Temperature rating 500°F (260°C) 500°F (260°C) Pressure rating 21000 psi (145 MPa) 21000 psi (145 MPa)Top connection RTG Bolt TYPE Male RTG Bolt TYPE MaleBottom connection NA Go TYPE Female (1 ./16” - 12 UN)

AS90031 AS90032

AS90033 AS90042

Page 384: AES Catalog

COMPONENTS

G-53 << Return to Section G Menu << Return to Main Menu

#10 Baker Firing Head To GO Quick Change#20 Baker Firing Head To GO Quick Change Ref. Part No. Description 1 AS100005 #10 Baker Firing Head to GO Quick Change Complete Assy 2 KIT-100005* Complete Kit Assy 3 AS100004 #20 Baker Firing Head to GO Quick Change Complete Assy 4 KIT-100004** Complete Kit Assy 5 OOV0328-95 O-Rings: 328 V95 6 1.0033 Contact Plunger 7 HOO0254 Retainer Ring, #62 8 HOO0005 Retainer Ring, 7/8 9 3.2500093 Insulating Washer10 0.6250051 Insulating Washer11 3.2500092 Contact Insulator12 1.0037 Contact Spring13 3.2500091 Contact Insulator14 HOO0344 Contact Spring15 3.5000005A Contact Rod End Cap16 BOO0035 Teflon® Tubing, 5/16” x 0.01517 3.5000005 1/4-28 Contact Rod18 OOV0230-95 Viton 95 O-Rings: 23019 3.2500083 Contact Insulator20 3.2500030A Contact Rod End Cap21 3.2500082 Contact Spring22 3.5000004 #20 Firing Head Sub Body23 3.2500090 #10 Firing Head Sub Body24 1.6870111 Contact Plunger25 3.0059 Contact Insulator26 3.0062 Thread Ring27 3.2500026 Contact Insulator28 3.2500088 #20 Retainer Collar29 OOO0112-95 Viton 95 O-Rings: 112 30 3.2500010A Igniter Holder Cap31 OOO0220 Viton O-Rings: 22032 OOV0222-95 Viton 95 O-Rings: 222 33 OOV0325-95 Viton 95 O-Rings: 325 34 3.0060 #10 Igniter Holder Body35 3.2500010 #20 Igniter Holder Body

*KIT-100005 Includes: LAF00011 Contact Plunger 1.6870111 Contact Plunger 3.0059 Contact Insulator 3.2500093 Insulating Washer HOO0005 Retainer Ring, 7/8 HOO0344 Contact Spring 3.2500091 Contact InsulatorDoes not include O-Rings

**KIT-100004 Includes: LAF00011 Contact Plunger 1.6870111 Contact Plunger 3.2500026 Contact Insulator 3.2500030A Contact Rod End Cap 3.2500082 Contact Spring 3.5000005 1/4-28 Contact Rod 3.5000005A Contact Rod End Cap BOO0035 Teflon® Tubing, 5/16 x 0.015 (2) 0.6250051 Insulating Washer 1.0037 Contact Spring 3.2500083 Contact Insulator 3.2500092 Contact Insulator HOO0254 Retainer Ring, #62Does not include O-Rings

1

2

34

5

6

8

9

13

14

18

24

25

26

29

30

31

32

23

2 3/8” - 6 ACME - 2G

3

4

15

16

17

22

6

7

10

11

12

5

10

18

1920

2127

24

28

30

29

33

5

2 7/8” - 6 ACME - 2G

2 3/4” - 6 ACME - 2G

2 3/4” - 6 ACME - 2G

ADAPTOR

Page 385: AES Catalog

SPECIFICATIONS

G-54<< Return to Section G Menu << Return to Main Menu

ADAPTOR

SPECIFICATIONS AS100004

#10 Baker Firing Head To GO Quick Change#20 Baker Firing Head To GO Quick Change

Tool diameter (O.D.) 3.437 in. (87.3 mm)Tool length 2.77 in. (70.36 mm)Tool weight 17.08 lbs (7.75 kg)Shipping length 8.77 in. (222.758 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Available upon requestBottom connection Available upon request

SPECIFICATIONS AS100005Tool diameter (O.D.) 3.25 in. (82.55 mm)Tool length 2.25 in. (57.15 mm)Tool weight 10.96 lbs (4.97 kg)Shipping length 8.25 in. (209.55 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Available upon requestBottom connection Available upon request

AS100005

AS100004

Page 386: AES Catalog

COMPONENTS

G-55 << Return to Section G Menu << Return to Main Menu

#10 Baker Firing Head For Setting Tool

Ref. Part No. Description 1 AS100006 Firing Head Assy 2 KIT-100006* Complete Kit Assy 3 HOO0270 1/4-28 Acorn Nut, S.S. 4 OOV0222-95 Viton 95 O-Rings: 222 5 3.2500084 Contact Insulator 6 3.2500030-2 Contact Rod 1/4”-28 x 4 7 BOO0035 Teflon Tubing, 5/16 x 0.015 8 3.2500083 Insulator 9 3.2500030A Thru Rod Receptacle10 3.2500082 Contact Spring11 1.6870111 Contact Plunger12 3.0059 Insulator13 3.0062 Threaded Ring14 3.2500010A Firing Head Cap Retainer15 OOV0112-92 Viton 95 O-Rings: 112 16 OOV0220-95 Viton 95 O-Rings: 22017 3.0060 #10 Igniter Holder Body18 3.2500103 Firing Head Body

*KIT-10006 Includes: 3.0059 Insulator 3.2500083 Insulator 3.2500084 Contact Insulator 1.6870111 Contact Plunger 3.2500030-2 Contact Rod 1/4”-28 x 4 3.2500030A Thru Rod Receptacle 3.2500082 Contact Spring BOO0035 Teflon Tubing, 5/16 x 0.015 HOO0270 1/4-28 Acorn Nut, S.S.Does not include O-Rings

1

16

4

4

2

3

5

6

7

8

9

10

18

11

12

13

14

15

17

2 3/8” - 6 ACME - 2G

2 3/8” - 6 ACME - 2G

ADAPTOR

Page 387: AES Catalog

SPECIFICATIONS

G-56<< Return to Section G Menu << Return to Main Menu

ADAPTOR

#10 Baker Firing Head For Setting Tool

SPECIFICATIONS AS100006Tool diameter (O.D.) 2.75 in. (69.85 mm)Tool length 3.5 in. (88.9 mm)Tool weight 10.9 lbs (4.94 kg)Shipping length 9.5 in. (241.3 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Available upon requestBottom connection Available upon request

Page 388: AES Catalog

COMPONENTS

G-57 << Return to Section G Menu << Return to Main Menu

#20 Baker Firing Head For Setting Tool

Ref. Part No. Description 1 AS100001 #20 Baker Firing Head Assy 2 KIT-100001* Complete Kit Assy 3 HOO0270 1/4-28 Acorn Nut, S.S. 4 OOV0222-95 Viton 95 O-Rings: 222 5 3.2500084 Contact Insulator 6 3.2500030 Contact Thru Rod 7 BOO0035 Teflon® Tubing, 5/16” x 0.015 8 3.2500083 Insulator 9 3.2500030A Thru Rod Receptacle10 3.2500082 Contact Spring11 1.6870111 Contact Plunger12 3.2500026 Contact Insulator13 3.2500088 Retainer Ring14 3.2500010A Firing Head Cap Retainer15 OOV0112-95 Viton 95 O-Ring: 11216 OOV0325-95 Viton 95 O-Ring: 325 17 3.2500010 Firing Head Igniter18 OOV0328-95 Viton 95 O-Ring: 328 19 3.2500081 Firing Head Body

*KIT-100001 Includes: 3.2500083 Insulator 3.2500084 Contact Insulator BOO0035 Teflon® Tubing, 5/16” x 0.015 (2) OOV0222-95 Viton O-Rings: 222 1.6870111 Contact Plunger 3.2500026 Contact Insulator 3.2500030 Contact Thru Rod 3.2500030A Thru Rod Receptacle 3.2500082 Contact Spring HOO0270 1/4-28 Acorn Nut, S.S.Does not include O-Rings

1

2

4

6

7

3

5

16

18

17

8

9

10

19

11

12

13

14

15

2 7/8”-6 ACME - 2G

2 3/8”-6 ACME - 2G

ADAPTOR

Page 389: AES Catalog

SPECIFICATIONS

G-58<< Return to Section G Menu << Return to Main Menu

ADAPTOR

#20 Baker Firing Head For Setting Tool

SPECIFICATIONS AS100001Tool diameter (O.D.) 3.825 in. (97.155 mm)Tool length 3.94 in. (100.076 mm)Tool weight 16.16 lbs (7.33 kg)Shipping length 9.94 in. (252.476 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Available upon requestBottom connection Available upon request

Page 390: AES Catalog

COMPONENTS

G-59 << Return to Section G Menu << Return to Main Menu

#10 Baker Firing Head To GO Quick Change#20 Baker Firing Head To GO Quick ChangeRef. Part No. Description 1 AS100002 #10 Baker Firing Head to GO Quick Change Assy 2 AS100003 #20 Baker Firing Head to GO Quick Change Assy 3 OOV0226-95 Viton 95 O-Rings: 226 4 OOV0230-95 Viton 95 O-Rings: 230 5 OOV0328-95 Viton 95 O-Rings: 328 6 OOV0222-95 Viton 95 O-Rings: 222

2 3/8”-6 ACME - 2G

2 3/4”-6 ACME - 2G

1

2

5

6

4

4

3

3

2 3/4”-6 ACME - 2G

2 7/8”-6 ACME - 2G

ADAPTOR

Page 391: AES Catalog

SPECIFICATIONS

G-60<< Return to Section G Menu << Return to Main Menu

ADAPTOR

#10 Baker Firing Head To GO Quick Change#20 Baker Firing Head To GO Quick Change

SPECIFICATIONS AS100003Tool diameter (O.D.) 3.437 in. (87.3 mm)Tool length 2.813 in. (71.45 mm)Tool weight 18.5 lbs (8.39 kg)Shipping length 8.813 in. (223.8502 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Available upon requestBottom connection Available upon request

SPECIFICATIONS AS100002Tool diameter (O.D.) 3.25 in. (82.55 mm)Tool length 2.25 in. (57.15 mm)Tool weight 14 lbs (6.35 kg)Shipping length 8.25 in. (209.55 mm)Temperature rating 500°F (260°C)Pressure rating 21000 psi (145 MPa)Top connection Available upon requestBottom connection Available upon request

AS100002

AS100003

Page 392: AES Catalog
Page 393: AES Catalog

<< Return to Main Menu

SECTION H

PanelsTable of Contents - Panels

PAGE TOOLPANELSH-1 Portable Shooting Supply PanelH-3 Portable Free Point & Casing Collar Locator PanelH-5 Portable Free Point & Casing Collar Locator Panel - 1 5/8”H-7 Portable Free Point Panel H-9 Portable Free Point Panel - 1 5/8”H-11 Portable Combination Panel H-13 Portable Combination Panel - 1 5/8”H-15 Universal Portable Free Point CCLH-17 Standard Free Point CCL RackmountH-19 Standard Free Point CCL Rackmount - 1 5/8”H-21 Motorized Free Pont PanelH-23 Portable Speaker SystemH-25 Grounding Reel

Page 394: AES Catalog

COMPONENTSPANEL

H-1 << Return to Section H Menu << Return to Main Menu

Portable Shooting Supply Panel - PSS00

0100 200 300 400

500

AC VOLTS

01 2

3

AC AMPERES

ARM FIRE

LINE

AC

VOLTAGEADJUSTMENT

POS.

NEG.DC

POWER

Page 395: AES Catalog

SPECIFICATIONSPANEL

H-2<< Return to Section H Menu << Return to Main Menu

Portable Shooting Supply Panel - PSS00

The PSS00 is the portable panel, used to power, monitor and control the Shooting Supply

FEATURES• Monitors and controls tool operation• Compatible of firing AC, POS DC or NEG DC shooting current• Two hand safety switch system for shoting curcuit• Helicopter transportable

DESCRIPTIONThe portable shooting supply panel runs off 110V AC power and controls the functions and power supply to monitor and operate the downhole shooting supply. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, firing voltage dial, AC/DC switch, POS/NEG switch, fire momentary switch and arm switch.

The firing voltage dial adjusts the supply voltage for detonating the perforating gun or string shot. Power cannot be applied to this control unless the arm toggle switch and fire momentary switch have also been properly set. The voltage and current meters allow the operator to closely monitor detonation.

SPECIFICATIONSPanel dimensions 9 in. x 9 in. x 11 in. (229 mm x 229 mm x 280 mm)Panel weight 21.22 lbs. (9.625 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 27.22 lbs. (12.35 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput shooting voltage* 235±10V AC, 295±10V + DC, 295±10V - DC

** The shooting voltage values specify if the current is AC or DC and if it is positive or negative.

Page 396: AES Catalog

COMPONENTSPANEL

H-3 << Return to Section H Menu << Return to Main Menu

Portable Free Point CCL Panel - PFPCCL00

ON

OFF

NORM NORM

AMP X2

ZERO

SENS.

C.C.L. GAIN

FUSE

AC

POWER

0 500 500

COLLAR LOCATOR

SET

REC.

C.C.L. F.P.

0 20 40 60 80

100

FREE POINT

LINE

Page 397: AES Catalog

SPECIFICATIONSPANEL

H-4<< Return to Section H Menu << Return to Main Menu

Portable Free Point CCL Panel - PFPCCL00

The PFPCCL00 is the portable panel, used to power, monitor and control the Free Point Sensor or Casing Collar Locator (CCL).

FEATURES• Monitors and controls tool operation• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 11/16”, 1” and 1 3/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe portable free point and CCL panel runs off mains power and controls the functions and power supply to monitor and operate the downhole free point or CCL. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, circuit selector switch, reset switch, norm/amp switch, norm/test switch, CCL gain dial, 1 3/8” zero and sens free point dials.

The circuit selector switch allows the operator to select the correct circuit for the tool in use. The 1 3/8” free point circuit is com-patible with an 11/16”, 1”, and 1 3/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial controls the sensitivity of the CCL signals. The norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off.

SPECIFICATIONSPanel dimensions 9 in. x 9 in. x 11 in. (229 mm x 229 mm x 280 mm)Panel weight 8.75 lbs. (3.97 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 14.75 lbs. (6.69 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput CCL voltage ±15V DCFree point compatibility 11/16 in., 1 in., 1 3/8 in.Output 1 3/8 free point voltage** 9.5-10V AC, 100V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 398: AES Catalog

COMPONENTSPANEL

H-5 << Return to Section H Menu << Return to Main Menu

Portable Free Point & CCL Panel - PFPCCL00 -1 5/8

ON

OFF

NORM NORM

AMP X2

ZERO

SENS.

C.C.L. GAIN

FUSE

AC

POWER

0 500 500

COLLAR LOCATOR

SET

REC.

C.C.L. F.P.

0 20 40 60 80

100

FREE POINT

LINE

Page 399: AES Catalog

SPECIFICATIONSPANEL

H-6<< Return to Section H Menu << Return to Main Menu

Portable Free Point & CCL Panel - PFPCCL00 -1 5/8

The PFPCCL00-1 5/8 is the portable panel, used to power, monitor and control the Free Point Sensor or Casing Collar Locator (CCL).

FEATURES• Monitors and controls tool operation• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 1 5/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe portable free point and CCL panel runs off mains power and controls the functions and power supply to monitor and operate the downhole free point or CCL. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, circuit selector switch, reset switch, norm/amp switch, norm/test switch, CCL gain dial, 1 5/8” zero and sens free point dials.

The circuit selector switch allows the operator to select the correct circuit for the tool in use. The 1 5/8” free point circuit is compat-ible with the 1 5/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial controls the sensitivity of the CCL signals. The norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off.

SPECIFICATIONSPanel dimensions 9 in. x 9 in. x 11 in. (229 mm x 229 mm x 280 mm)Panel weight 8.75 lbs. (3.97 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 14.75 lbs. (6.69 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput CCL voltage ±15V DCFree point compatibility 1 5/8 in.Output 1 3/8 free point voltage** 5.5-6.5V AC, 200V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 400: AES Catalog

COMPONENTSPANEL

H-7 << Return to Section H Menu << Return to Main Menu

Portable Free Point Panel - PFP00

ON

OFF LINE

SET

NORM X2

ZERO SENS.

FUSE

POWER

AC

0 20 40 60 80

100

FREE POINT

Page 401: AES Catalog

SPECIFICATIONSPANEL

H-8<< Return to Section H Menu << Return to Main Menu

The PFP00 is the portable panel, used to power, monitor and control the Free Point Sensor.

Portable Free Point Panel - PFP00

FEATURES• Monitors and controls Freepoint tool operation• Compatible with 11/16”, 1” and 1 3/8” Free Point Sensors• ZERO and SENS dials allow for setting the zero end and high end of the Freepoint meter• Helicopter transportable

DESCRIPTIONThe portable freepoint panel runs off mains power and controls the functions and power supply to monitor and operate the down-hole free point. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, set switch, norm/X2, zero and sens free point dials.

The 1 3/8” free point circuit is compatible with an 11/16”, 1”, and 1 3/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the set switch sends a signal to reset the free point sensor.

SPECIFICATIONSPanel dimensions 9 in. x 9 in. x 11 in. (229 mm x 229 mm x 280 mm)Panel weight 8.7 lbs. (3.95 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 11.5 lbs. (5.22 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AFree point compatibility 11/16 in., 1 in., 1 3/8 in.Output 1 3/8 free point voltage** 9.5-10V AC, 100V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 402: AES Catalog

COMPONENTSPANEL

H-9 << Return to Section H Menu << Return to Main Menu

Portable Free Point Panel - PFP00 -1 5/8

ON

OFF LINE

SET

NORM X2

ZERO SENS.

FUSE

POWER

AC

0 20 40 60 80

100

FREE POINT

Page 403: AES Catalog

SPECIFICATIONSPANEL

H-10<< Return to Section H Menu << Return to Main Menu

The PFP00 is the portable panel, used to power, monitor and control the Free Point Sensor.

Portable Free Point Panel - PFP00 -1 5/8

FEATURES• Monitors and controls Freepoint tool operation• Compatible with 1 5/8” Free Point Sensors• ZERO and SENS dials allow for setting the zero end and high end of the Freepoint meter• Helicopter transportable

DESCRIPTIONThe portable freepoint panel runs off mains power and controls the functions and power supply to monitor and operate the down-hole free point. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, set switch, norm/X2, zero and sens free point dials.

The 1 3/8” free point circuit is compatible with a 1 5/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the set switch sends a signal to reset the free point sensor.

SPECIFICATIONSPanel dimensions 9 in. x 9 in. x 11 in. (229 mm x 229 mm x 280 mm)Panel weight 8.7 lbs. (3.95 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 11.5 lbs. (5.22 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AFree point compatibility 1 5/8 in.Output 1 5/8 free point voltage** 9.5-10V AC, 100V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 404: AES Catalog

COMPONENTSPANEL

H-11 << Return to Section H Menu << Return to Main Menu

Portable Combination Panel - PCP00 Free Point, Collar Locator & Shooting Supply

POWER

A R M

F I R E

VOLTAGE ADJUSTMENT

NORM

AMP

ZERO

RESET

NORM

X2

C.C.L. GAIN

FUSE

AC LINE

0 100 200 300 400

500

SHOOTING VOLTS

0 1 2

3

SHOOTING AMPERES

0 500 500

COLLAR LOCATOR

AC

DC

POS.

NEG.

ON

OFF

REC. C.C.L.

F.P.

SAFE FIRE

0 20 40 60 80

100

FREE POINT

SENS.

Page 405: AES Catalog

SPECIFICATIONSPANEL

H-12<< Return to Section H Menu << Return to Main Menu

The PCP00 is the portable panel, used to power, monitor and control the Free Point Sensor, Casing Collar Locator (CCL) or Shooting Supply

Portable Combination Panel - PCP00 Free Point, Collar Locator & Shooting Supply

FEATURES• Monitors and controls tool operation• SAFE” setting prevents any signal from detonating the shooting supply• Two hand safety switch system for shooting circuit• Capable of shooting AC or DC and positive or negative firing current• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 11/16”, 1” and 1 3/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe portable combination panel runs off mains power and controls the functions and power supply to monitor and operate the downhole free point, CCL or shooting supply. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, circuit selector switch, reset switch, norm/amp switch,, norm/X2, 1 3/8” zero and sens free point dials, CCL gain dial, firing voltage dial, fire momentary switch and arm switch.

The circuit selector switch allows the operator to select the correct circuit for the tool in use. The 1 3/8” free point circuit is com-patible with an 11/16”, 1”, and 1 3/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial controls the sensitivity of the CCL signals, and norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off. The firing voltage dial adjusts the supply voltage for detonating the perforating gun or string shot. Power cannot be applied to this control unless the arm toggle switch and fire

momentary switch have also been properly set. The voltage and current meters allow the operator to closely monitor detonation.

SPECIFICATIONSPanel dimensions 17.5 in. x 11 in. x 9 in. (445 mm x 280 mm x 229 mm)Panel weight 29 lbs. (13.15 kg) Shipping dimensions 22 in. x 12 in. x 12 in. (508 mm x 304.8 mm x 304.8 mm)Shipping weight 34 lbs. (15.4 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput shooting voltage 480±10V AC, 480±10V + DC, 480±10V - DCOutput CCL voltage ±15V DCFree point compatibility 11/16 in., 1 in., 1 3/8 in.Output 1 3/8 free point voltage** 9.5-10V AC, 100V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 406: AES Catalog

COMPONENTSPANEL

H-13 << Return to Section H Menu << Return to Main Menu

Portable Combination Panel - PCP00 -1 5/8Free Point, Collar Locator & Shooting Supply

POWER

A R M

F I R E

VOLTAGE ADJUSTMENT

NORM

AMP

ZERO

RESET

NORM

X2

C.C.L. GAIN

FUSE

AC LINE

0 100 200 300 400

500

SHOOTING VOLTS

0 1 2

3

SHOOTING AMPERES

0 500 500

COLLAR LOCATOR

AC

DC

POS.

NEG.

ON

OFF

REC. C.C.L.

F.P.

SAFE FIRE

0 20 40 60 80

100

FREE POINT

SENS.

Page 407: AES Catalog

SPECIFICATIONSPANEL

H-14<< Return to Section H Menu << Return to Main Menu

The PCP00 is the portable panel, used to power, monitor and control the Free Point Sensor, Casing Collar Locator (CCL) or Shooting Supply

FEATURES• Monitors and controls tool operation• “SAFE” setting prevents any signal from detonating the shooting supply• Two hand safety switch system for shooting circuit• Capable of shooting AC or DC and positive or negative firing current• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 11/16”, 1” and 1 3/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe portable combination panel runs off mains power and controls the functions and power supply to monitor and operate the downhole free point, CCL or shooting supply. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, circuit selector switch, reset switch, norm/amp switch,, norm/X2, 1 5/8” zero and sens free point dials, CCL gain dial, firing voltage dial, fire momentary switch and arm switch.

The circuit selector switch allows the operator to select the correct circuit for the tool in use. The 1 5/8” free point circuit is compat-ible with the 1 5/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial controls the sensitivity of the CCL signals, and norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off. The firing voltage dial adjusts the supply voltage for detonating the perforating gun or string shot. Power cannot be applied to this control unless the arm toggle switch and fire momentary switch have also been properly set. The voltage and current meters allow the operator to closely monitor detonation.

SPECIFICATIONSPanel dimensions 17.5 in. x 11 in. x 9 in. (445 mm x 280 mm x 229 mm)Panel weight 29 lbs. (13.15 kg) Shipping dimensions 22 in. x 12 in. x 12 in. (508 mm x 304.8 mm x 304.8 mm)Shipping weight 34 lbs. (15.4 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput shooting voltage 480±10V AC, 480±10V + DC, 480±10V - DCOutput CCL voltage ±15V DCFree point compatibility 1 5/8 im.Output 1 3/8 free point voltage** 5.5-6.5V AC, 200V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Portable Combination Panel - PCP00-1 5/8 Free Point, Collar Locator & Shooting Supply

Page 408: AES Catalog

COMPONENTSPANEL

H-15 << Return to Section H Menu << Return to Main Menu

Universal Portable Free Point CCL - PFPCCL01

ON

OFF

NORM

NORM

AMP

TEST

1 5/8 SENS.

1 3/8 SENS.

C.C.L. GAIN

FUSE

110 VOLTSAC

POWER

RESET

REC.

1 3/8 ZERO

1 5/8 ZEROLINE

0500500

250 250

D.C. MICROAMPERES

020 40 60 80

100

D.C. MICROAMPERES

C.C.L. 1 5/8

F.P.

1 3/8 F.P.

Page 409: AES Catalog

SPECIFICATIONSPANEL

H-16<< Return to Section H Menu << Return to Main Menu

Universal Portable Free Point CCL - PFPCCL01

The PFPCCL01 is the portable panel, used to power, monitor and control the Free Point Sensor or Casing Collar Locator (CCL).

FEATURES• Monitors and controls tool operation• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 11/16”, 1”, 1 3/8” and 1 5/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe universal portable free point and CCL panel runs off mains power and controls the functions and power supply to monitor and operate the downhole free point or CCL. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, circuit selector switch, reset switch, norm/amp switch, norm/test switch, CCL gain dial, 1 3/8” and 1 5/8” zero and sens free point dials.

The circuit selector switch allows the operator to select the correct circuit for the tool in use. The 1 3/8” free point circuit is compat-ible with an 11/16”, 1”, and 1 3/8” free point sensor, and 1 5/8” is only compatible with the 1 5/8” free point sensor. Each pair of zero and sens free point dials are to fine-tune the free point meter, depending on the tool’s size. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial controls the sensitivity of the CCL signals. The norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off.

SPECIFICATIONSPanel dimensions 11.5 in. x 8.5 in. x 10.5 in. (292 mm x 216 mm x 267 mm)Panel weight 13.5 lbs. (6.12 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 19.5 lbs. (8.85 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput CCL voltage ±15V DCFree point compatibility 11/16 in., 1 in., 1 3/8 in., 1 5/8 in.Output 1 3/8 free point voltage** 9.5-10V AC, 100V DCOutput 1 5/8 free point voltage ** 5.5-6.5V AC, 200V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 410: AES Catalog

COMPONENTSPANEL

H-17 << Return to Section H Menu << Return to Main Menu

Rack Mount Free Point & CCL Panel - FPCCLRM00

POWER

NORM

AMP ZERO

SET

NORM X2

C.C.L. GAIN FUSE

0 500 500

300 300 100 100

D.C. MICROAMPERES

ON

OFF

C.C.L. F.P.

SENS.

0 20 40 60 80

100

D.C. MICROAMPERES

Page 411: AES Catalog

SPECIFICATIONSPANEL

H-18<< Return to Section H Menu << Return to Main Menu

Rack Mount Free Point & CCL Panel - FPCCLRM00

The PFPCCRM00 is the rack mount panel, used to power, monitor and control the Free Point Sensor or Casing Collar Locator (CCL).

FEATURES• Monitors and controls tool operation• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 11/16”, 1”, 1 3/8” and 1 5/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe rack mount free point and CCL panel runs off mains power and cotrols the functions and power supply tomonitor and operate the downhole free point or CCL. The panel is conected otthe tool via line cable. The portable panel has numerous controls-mains on/off switch, reset switch, norm/amp switch, norm/test switch, CCL gain dial, zero and sensitivity free point dials.

The circuit selectors switch allows the operator to select the correct circuit for the tool in use. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given lengths of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial cotrols the sensitivity of the CCL signals. The norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off.

SPECIFICATIONSPanel dimensions 8 1/2 in. x 19 in. x 6 in. (216 mm x 483 mm x 152 mm)Panel weight 8.4 lbs. (3.81 kg) Shipping dimensions 24 in. x 12 in. x 6 in. (610 mm x 305 mm x 152 mm)Shipping weight 14.4 lbs. (6.53 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput CCL voltage ±15V DCFree point compatibility 11/16”, 1” and 1 3/8”Output free point voltage** 9.5-10V AC, 100V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 412: AES Catalog

COMPONENTSPANEL

H-19 << Return to Section H Menu << Return to Main Menu

Rack Mount Free Point & CCL Panel - FPCCLRM00- 1 5/8

POWER

NORM

AMP ZERO

SET

NORM X2

C.C.L. GAIN FUSE

0 500 500

300 300 100 100

D.C. MICROAMPERES

ON

OFF

C.C.L. F.P.

SENS.

0 20 40 60 80

100

D.C. MICROAMPERES

Page 413: AES Catalog

SPECIFICATIONSPANEL

H-20<< Return to Section H Menu << Return to Main Menu

Rack Mount Free Point & CCL Panel - FPCCLRM00-1 5/8

The PFPCCRM00-1 5/8 is the rack mount panel, used to power, monitor and control the Free Point Sensor or Casing Collar Locator (CCL).

FEATURES• Monitors and controls tool operation• Controls CCL signal sensitivity• “Sonalert” Piezo Alarm for CCL• REC connector connects an external device to record CCL activity• Compatible with 1 5/8” Free Point Sensors• Helicopter transportable

DESCRIPTIONThe rack mount free point and CCL panel runs off mains power and controls the functions and power supply to monitor and oper-ate the down hole free point or CCL. The panel is connected to the tool via line cable. The portable panel has numerous controls-mains on/off switch, circuit selector switch, reset switch, norm/amp switch, norm/test switch, CCL gain dial, 1 5/8” zero and sensitivity free point dials.

The circuit selector switch allows the operator to select the correct circuit for the tool in use. The 1 5/8” free point circuit is compat-ible with the 1 5/8” free point sensor. The zero and sens free point dials are to fine-tune the free point meter. Any torque or stretch in the given length of tubing, drill pipe or casing causes the free point meter to fluctuate. When held in the upward position, the reset switch sends a signal to reset the free point sensor. The CCL gain dial controls the sensitivity of the CCL signals. The norm/amp switch toggles the CCL “Sonalert” piezo alarm on and off.

SPECIFICATIONSPanel dimensions 8 1/2 in. x 19 in. x 6 in. (216 mm x 483 mm x 152 mm)Panel weight 8.4 lbs. (3.81 kg) Shipping dimensions 24 in. x 12 in. x 6 in. (610 mm x 305 mm x 152 mm)Shipping weight 14.4 lbs. (6.53 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput CCL voltage ±15V DCFree point compatibility 1 5/8”Output 1 5/8 free point voltage** 5.5-6.5V AC, 200V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 414: AES Catalog

COMPONENTSPANEL

H-21 << Return to Section H Menu << Return to Main Menu

020 40 60 80

100

FREE POINT

DC MICROAMPERES

0500500

COLLAR LOCATOR

DC MICROAMPERES

MAINS IN115VAC 500mA

50/60HzFUSE:3A(T)

C.C.L. GAIN

NORMNORM

AMP X2

ZERO

SENS

CCL

FP UPPER

LOWER

OPEN

CLOSE

ANCHOR STATUS

LINE OUT+/-150V DC MAX

!

POWER REC

SET

Motorized Free Point Panel - FPIP001

Page 415: AES Catalog

SPECIFICATIONSPANEL

H-22<< Return to Section H Menu << Return to Main Menu

Motorized Free Point Panel - FPIP001

SPECIFICATIONSDimensions 11.5 in. x 8.5 in. x 10.5 in. (292 mm x 216 mm x 267 mm)Panel weight 13.5 lbs. (6.12 kg) Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 19.5 lbs. (8.85 kg)Power requirements 11OV AC, 3AOutput current capability 0-2.5AOutput CCL voltage ±15V DCFree point compatibility 11/16 in., 1 in., 1 3/8 in., 1 5/8 in.Output 1 3/8 free point voltage** 9.5-10V AC, 100V DCOutput 1 5/8 free point voltage ** 5.5-6.5V AC, 200V DC

** The free point operating voltage is the AC voltage, and the resetting voltage is the DC voltage.

Page 416: AES Catalog

COMPONENTSPANEL

H-23 << Return to Section H Menu << Return to Main Menu

Portable Speaker System - PAS00

VOLUMETALK

AC

OFF

Ref. Part No. Description 1 PAS01 Heavy Duty Rig Speaker 2 PAS02 Portable Reel & Wire 3 PAS03 Portable Base Speaker

1

2

3

Page 417: AES Catalog

SPECIFICATIONSPANEL

H-24<< Return to Section H Menu << Return to Main Menu

Portable Speaker System - PAS00

SPECIFICATIONS PAS03Dimensions 9 in. x 9 in. x 11 in. (228.6 mm x 228.6 mm x 279.4 mm)Weight 8.63 lbs. (3.91 kg)Shipping dimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 407 mm)Shipping weight 14.63 lbs. (6.64 kg)Power rating 8 WattsPower 110VAC, 3A

The PAS01 is a heavy duty rig speaker, used as a remote speaker for use in areas where the PAS03 cannot be heard.

FEATURES• Environment-Resistance for indoor or outdoor use• Chrome plated, steel handle• Sealed aluminum houstin• High-efficiency, 15 Watt compression driver• Helicopter transportable

DESCRIPTIONThe heavy duty rig speaker uses fifteen watts of continuous power. The metal constructed loud speaker mounted in an aluminum housing allows the speaker to withstand harsh environments and abuse without compromising its functionality. Its chrome plated, steel handle and size make it easy to transport. The speaker is used in conjunction with the PAS00 PA system and is connected to the PAS00 system via a 3 pin, male Amphenol 97 series connector.

SPECIFICATIONS PAS01Panel dimensions 8.5 in. x 8.5 in. x 5 in. (216 mm x 216 mm x 127 mm)Panel weight 8.10 lbs. (13.15 kg) Shipping dimensions 12 in. x 12 in. x 6 in. (305 mm x 305 mm x 152.5 mm)Shipping weight 14.1 lbs. (6.40 kg)Power rating 15 Watts continuousFrequency response 600-1400Hz Nominal (700-5500Hz +5dB)Temperature rating -40-158 F (-40-70 C)

SPECIFICATIONS PAS02Dimensions 12 in. x 12 in. x 14.5 in. (305 mm x 305 mm x 368.3 mm)Weight 18.28 lbs. (8.291 kg)Shipping dimensions 15 in. x 15 in. x 17.5 in. (381 mm x 381 mm x 444.5 mm)Shipping weight 24.28 lbs. (11.01 kg)Voltage 600VMax current 4A per conductor @25 C

Page 418: AES Catalog

COMPONENTSPANEL

H-25 << Return to Section H Menu << Return to Main Menu

Grounding Reel - GRD00

Page 419: AES Catalog

SPECIFICATIONSPANEL

H-26<< Return to Section H Menu << Return to Main Menu

Grounding Reel - GRD00

SPECIFICATIONSDimensions 12 in. x 12 in. x 16 in. (305 mm x 305 mm x 406.4 mmWeight 44.28 lbs. (20.09 kg)Shipping dimensions 14 in. x 14 in. x 18 in. (356 mm x 356 mm x 457.2 mmShipping weight 46 lbs. (20.87 kg)Voltage 2000VDCOutput current capability 0-2.5ATemperature 90°F (32.2°C)Max current 66A @ 90 C

Page 420: AES Catalog
Page 421: AES Catalog

IndexSECTION 1

1-1Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

CABLE HEADS11/16” Cable Head Assy (Clamp Ring)..................................................AS00003 ..............................................A-15/8” Cable Head Assy (Clamp Ring).......................................................AS10006...............................................A-13/4” Cable Head Assy (Clamp Ring).......................................................AS20004...............................................B-11” Cable Head Assy (Clamp Ring)...........................................................AS30003 ...............................................C-11 3/8” Cable Head Assy (Cone & Washer)..........................................AS40095 ...............................................D-11 3/8” Cable Head Assy (Clamp Ring)...................................................AS40003 ...............................................D-31 3/8” GO Split Cable Head ......................................................................AS40046 ...............................................D-51 7/16” Cable Head Assy (Cone & Washer)........................................AS50012 .............................................. E-11 7/16” Cable Head Assy (Clamp Ring)................................................AS50013 ............................................... E-31 7/16” GO Split Cable Head ...................................................................AS50009 ............................................... E-51 11/16” Cable Head Assy (Cone & Washer).....................................AS60059 ............................................... F-11 11/16” Cable Head Assy (Clamp Ring).............................................AS60036 ............................................... F-31 11/16” Go Split Cable Head .................................................................AS60081 ............................................... F-51 11/16” x 5’ Steel Sinker Bar Assy........................................................AS60002 ............................................... F-71 11/16” x 5’ Tungsten Sinker Bar Assy...............................................AS60003 ............................................... F-71 11/16” x 7’ Tungsten Sinker Bar Assy...............................................AS60004 ............................................... F-71 11/16” x 5’ Lead Sinker Bar Assy........................................................AS60033 ............................................... F-71 11/16” x 7’ Lead Sinker Bar Assy........................................................AS60034 ............................................... F-7

SINKER BARSAES 11/16”x 3’ Sinker Bar Assy................................................................AS10013...............................................A-3AES 5/8”x2 1/2’ Sinker Bar Assy..............................................................AS00004 ...............................................A-3AES 5/8”x3’ Sinker Bar Assy......................................................................AS00013 ...............................................A-33/4”x5’ Steel Sinker Bar Assy....................................................................AS20005 ...............................................B-31”x5’ Sinker Bar Assy....................................................................................AS30004 ...............................................C-31”x5’ Tungsten Sinker Bar Assy...............................................................AS30016 ...............................................C-31”x7’ Tungsten Sinker Bar Assy...............................................................AS30017 ...............................................C-31 3/8”x5’ Steel Sinker Bar Assy................................................................AS40004 ...............................................D-71 3/8” x 5’ Tungsten Sinker Bar Assy....................................................AS40009 ...............................................D-71 3/8” x 7’ Tungsten Sinker Bar Assy....................................................AS40015 ...............................................D-71 3/8” x 5’ Lead Sinker Bar Assy..............................................................AS40098 ..............................................D-71 3/8” x 7’ Lead Sinker Bar Assy.............................................................AS40099 ...............................................D-71 7/16”x5’ Steel Sinker Bar Assy.............................................................AS50016 ............................................... E-71 7/16”x5’ Tungsten Sinker Bar Assy....................................................AS50004 ............................................... E-71 7/16”x7’ Tungsten Sinker Bar Assy....................................................AS50005 ............................................... E-71 7/16”x5’ Lead Sinker Bar Assy.............................................................AS50021 ............................................... E-71 7/16”x7’ Lead Sinker Bar Assy.............................................................AS50022 ............................................... E-71 11/16”x5’ Steel Sinker Bar Assy...........................................................AS60002............................................... F-71 11/16”x5’ Tungsten Sinker Bar Assy.................................................AS60003 ............................................... F-71 11/16”x7’ Tungsten Sinker Bar Assy.................................................AS60004 ............................................... F-71 11/16”x5’ Lead Sinker Bar Assy..........................................................AS60033 ............................................... F-71 11/16” x7’ Lead Sinker Bar Assy.........................................................AS60034 ............................................... F-72” x 5’ Tungsten Sinker Bar Assy.............................................................AS90001 ..............................................G-12” x 7’ Tungsten Sinker Bar Assy.............................................................AS90002 ..............................................G-12” x 5’ Lead Sinker Bar Assy......................................................................AS90023 ...............................................G-12” x 7’ Lead Sinker Bar Assy......................................................................AS90024 ...............................................G-1

<< Return to Main Menu

Page 422: AES Catalog

IndexSECTION 1

1-2

CASING COLLAR LOCATORS5/8” Casing Locator......................................................................................AS00005 ...............................................A-511/16” Casing Collar Locator Complete Assy (NG)........................AS10001 ................................................A-711/16” Casing Collar Locator Shhoting Assy (G).............................AS10018 ...............................................A-93/4” Casing Locator......................................................................................AS20007 ...............................................B-51” Casing Collar Locator Assy (NG)........................................................AS30008 ...............................................C-51” GO Casing Collar Locator Assy (G)....................................................AS30014...............................................C-71 3/8” Casing Collar Locator Assy (G)...................................................AS40091 ...............................................D-91 3/8” Casing Collar Locator Assy (NG)................................................AS40092 ............................................D-111 7/16” Casing Collar Locator Assy (NG).............................................AS50006 ............................................... E-91 7/16” Casing Collar Locator Assy (G)................................................AS50008 .............................................E-111 5/8” Casing Collar Locator Assy (G)...................................................AS60103 ............................................... F-91 5/8” Casing Collar Locator Assy (NG)................................................AS60102 .............................................F-111 5/8” High Pressure Casing Bow Spring...........................................AS60093HPC.....................................F-391 11/16” Casing Collar Locator (G)........................................................AS60005..............................................F-152 1/8” Casing Collar Locator Assy (G)..................................................AS90048 ................................................G-33 1/4” Casing Collar Locator Assy (G)..................................................AS90021 ................................................G-53 1/8” Casing Collar Locator Assy (G)..................................................AS90021-3 1/8 ...................................G-73 1/4” Casing Collar Locator Coil & Magnet Assy (G)....................AS90021-1 ...........................................G-54 1/2” Casing Collar Locator Assy (Shooting)..................................AS90080 ................................................G-92 3/4” Casing Collar Locator Assy.........................................................AS90090 .............................................G-11

FREE POINT TOOLS & ACCESSORIES11/16” Free Point Complete Assy..........................................................AS100FP ............................................. A-1111/16” Free Point Complete w/Magnetic Section.........................AS100FPM.......................................... A-1111/16” Slack Joint Section Complete Assy.......................................AS10002 ............................................. A-1311/16” Upper Bow Spring Complete Assy........................................AS10003.............................................. A-1511/16” Sensor Section Complete Assy...............................................AS10004 ............................................. A-1711/16” Lower Bow Spring Complete Assy........................................AS10005.............................................. A-1911/16” Upper Magnet Section Assy.....................................................AS10010 ............................................. A-2111/16” Lower Magnet Section Assy.....................................................AS10011 ............................................. A-2111/16” Magnet Extension Assy..............................................................AS10012 ............................................. A-2111/16” Shot Rod Hanger Sub (1/2” - 20 V Threads)......................AS10015 ............................................. A-2311/16” Shot Rod Hanger Assy (1/4” Rod)...........................................AS10016 ............................................. A-2311/16” Tear Drop Sub Complete Assy.................................................AS10014 ............................................. A-255/8” Resistor Sub Complete Assy..........................................................AS00019 ............................................. A-271” Free Point Complete Assy....................................................................AS300FP ................................................C-91” Free Point Complete Magnet Section............................................AS300FPM ............................................C-91” AES Slack Joint Complete Assy.........................................................AS30009 ............................................. C-111” Upper or Lower Bow Spring Section Assy....................................AS30012 ............................................ C-131” Upper Magnet Section Complete Assy..........................................AS30031 ............................................ C-151” Lower Magnet Section Complete Assy..........................................AS30032 ............................................ C-151” Magnet Tool Extension Complete Assy.........................................AS30033 ............................................. C-151” Free Point Sensor Section Complete Assy (Boot)......................AS30011 ............................................. C-171” Free Point Sensor Section Complete Assy (Piston)...................AS30011PC ....................................... C-191” GO Bull Plug Assy.....................................................................................AS30006 ............................................ C-21

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 423: AES Catalog

IndexSECTION 1

1-3

FREE POINT TOOLS & ACCESSORIES (continued)1” AES Combination Diode Sub Assy...................................................AS30022 ............................................. C-231” Shot Rod Hanger Assembly (3/8” Rod)..........................................AS30037 ............................................. C-251 3/8” Free Point Complete with 16” Stroke.....................................AS400FP-16 ......................................D-131 3/8” Free Point Complete w/Magnetic Sections ........................AS400FPM .........................................D-131 3/8” AES Slack Joint Assy......................................................................AS40016 .............................................D-171 3/8” Upper & Lower Bow Spring Complete Assy (3 spring)...AS40017 .............................................D-191 3/8” Upper & Lower Bow Spring Complete Assy (4 spring)...AS40017-4 .........................................D-211 3/8” Casing Bow Spring Section Assy.............................................AS40088 .............................................D-231 3/8” AES Free Point Upper Magnet Section..................................AS40085 .............................................D-271 3/8” AES Free Point Lower Magnet Section..................................AS40086 .............................................D-271 3/8” AES Free Point Magnet Tool Extension..................................AS40087 ............................................D-271 3/8” AES Sensor Section Complete Assy (Boot)...........................AS40018.............................................D-291 3/8” Bull Plug Complete Assembly....................................................AS40020.............................................D-311 3/8” Combination Diode Assy.............................................................AS40035 .............................................D-331 3/8” Shot Rod Hanger Assy (3/8” Rod)............................................AS40096 .............................................D-35Motorized Free Point Indicator Tool Assy..........................................FPI007 ..................................................D-151 5/8” Free Point Complete Assy 16” Stroke....................................AS600FP-16 .......................................F-151 5/8” Combination Diode Complete Assy........................................AS60101..............................................F-291 5/8” Free Point Complete Assy 16” Stroke w/Magnets...........AS600FPM ...........................................F-151 5/8” AES Slack Joint Assy (16” Stroke).............................................AS60094-16 .......................................F-171 5/8” Upper & Lower Bow Spring Assy.............................................AS60093 ..............................................F-191 5/8” AES Free Point Upper Magnet Section..................................AS60096 ..............................................F-271 5/8” AES Free Point Lower Magnet Section..................................AS60097 ..............................................F-271 5/8” AES Free Point Magnet Tool Extension.................................AS60095 ..............................................F-271 5/8” AES Sensor Section (Boot)...........................................................AS60092 ..............................................F-291 5/8” Bull Plug Complete Assembly....................................................AS60100..............................................F-311 5/8” Shot Rod Hanger Assy (3/8” Rod)............................................AS60104 ..............................................F-351 5/8” High Pressure Free Point Tool (36” Stroke)..........................AS600FP-36PCHP ............................F-371 5/8” AES Slack Joint (36” Stroke) HP.................................................AS60094-36HP .................................F-391 5/8” High Pressure Bow Spring..........................................................AS60093HP ........................................F-231 5/8” Sensor Section (Piston) HP..........................................................AS60092PCHP ...................................F-411 5/8” High Pressure Grounded Bull Plug Assy...............................AS60100HP ........................................F-431 5/8” High Pressure Comb Diode Sub...............................................AS60101HP ........................................F-45

DECENTRALIZERS & CENTRALIZERS1 3/8” Magnetic Decentralizer (Channel)...........................................AS40073 .............................................D-371 3/8” GO Pin to Double Sealed Tear Drop Decentralizer..................AS40101 .................................................. D-391 7/16” Mechanical Decentralizer.........................................................AS50034 ..............................................E-131 7/16” Tear Drop GO Pin..........................................................................AS50037 ..............................................E-131 7/16” Mechanical Decentralizer Bottom........................................AS50035 .............................................E-151 7/16” Contact Centralizer Assy (less Springs)..............................AS50023.............................................. E-171 9/16” Magnetic Decentralizer (Channel)........................................AS60067 ..............................................F-471 9/16” Bottom Decentralizer (Button)................................................AS60074 .............................................F-491 9/16” Bottom Decentralizer (Channel).............................................AS60057 .............................................F-511 11/16” Bottom Decentralizer (Channel)..........................................AS60061 .............................................F-51

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 424: AES Catalog

IndexSECTION 1

1-4

DECENTRALIZERS & CENTRALIZERS (continued)1 11/16” Magnetic Decentralizer (Channel)......................................AS60030 .............................................F-531 11/16” Magnetic Decentralizer (Button).........................................AS60072 ..............................................F-551 11/16” GO Box to Double Sealed Tear Drop Magnetic Decentralizer (Channel)............AS60082 ..............................................F-571 11/16” Contact Centralizer (less Springs)......................................AS60066 ..............................................F-591 11/16” Roller Centralizer........................................................................AS60091 ..............................................F-612” Magnetic Decentralizer (Button).......................................................AS90045 ............................................G-132” RTG Bottom Decentralizer (Button)..................................................AS90071 ............................................G-152” Magnetic Decentralizer (Channel)...................................................AS90003 .............................................G-172” RTG Bottom Decentralizer (Channel)..............................................AS90043 .............................................G-192 3⁄4” Spring Centralizer.............................................................................AS90050 .............................................G-212 3⁄4” Roller Centralizer...............................................................................AS90050RA .......................................G-23

KNUCKLE JOINTS, SWIVELS, SKATES & SHOCK SUBS1” Knuckle Joint Complete Assy.............................................................AS30023 ............................................ C-271” Swivel Assy.................................................................................................AS30043 ............................................. C-291 7/16” Wireline Skate, 1 5/8” Drift.......................................................AS50032 .............................................E-191 7/16” Knuckle Joint Complete Assy..................................................AS50015BJ ........................................E-211 11/16” OTL Go Knuckle Joint Assy....................................................AS60080 ..............................................F-651 11/16” Knuckle Joint Complete Assy...............................................AS60062BS ........................................F-671 11/16” Conductor Swivel Complete Assy.......................................AS70006 .............................................F-691 11/16” Knuckle Joint Complete Assy Clvs.....................................AS60110 ...........................................F-1011 1⁄2” Wireline Skate, 1.71” Drift............................................................AS50033 ..............................................F-711 9/16” Wireline Skate, 1 13/16” Drift.................................................AS60077 ..............................................F-731 5/8” Wireline Skate, 1.875” Drift........................................................AS60083 ..............................................F-751 11/16” Shock Absorber Sub Complete Assy................................AS7005HD...........................................F-772 3⁄4” Quick Change Knuckle Joint (Pin To Box)..............................AS90066QC ......................................G-251 3⁄4” Wireline Skate, 2 1⁄8” Drift...........................................................AS90053 .............................................G-292 1/16” Wireline Skate, 2 5/8” Drift......................................................AS90054 .............................................G-312 1/8” Shock Absorber Complete Assy...............................................AS90065 .............................................G-332 3⁄4” Shock Absorber Complete Assy................................................AS90062HDQC ................................G-352 7/8” Conductor Swivel Assy.................................................................AS100012-2 7/8 ..............................G-393 1/8” AES Swivel..........................................................................................AS100012QC ....................................G-273 1/8” Shock Absorber Complete Assy...............................................AS100012HD ...................................G-37

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS5/8” Pin To JRC Cutter Assy.....................................................................AS00008 ............................................. A-2911/16” Pipe Recovery System Chemical Cutter To 5/8” AES Tear Drop.........................AS00011 ............................................. A-31 To Pressure Connector........................AS00012 ............................................. A-31 To 5/8” AES Pin.......................................AS00015 .............................................. A-31AES 5/8” Tear Drop......................................................................................AS00001 .............................................. A-33AES 5/8” Tear Drop w/Pressure Connector......................................AS00007 .............................................. A-33AES 5/8” Double Box Sub.........................................................................AS00009 .............................................. A-35AES 5/8” Double Pin Sub...........................................................................AS00014 ............................................. A-35AES 5/8” Bull Plug.........................................................................................AS00006 ............................................. A-37

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 425: AES Catalog

IndexSECTION 1

1-5Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS (continued)3⁄4” AES Tear Drop Assy.............................................................................AS20002 ................................................B-73⁄4” AES Tear Drop to 11/16” AES Pin..................................................AS20014 ................................................B-93⁄4” Goex Severing Tool Tear Drop To 11/16” AES Pin.................AS20016 ................................................B-93⁄4” Double GO Pin Assy............................................................................AS20006 ............................................. B-113⁄4” Double GO Box Assy...........................................................................AS20008 ............................................. B-113⁄4” GO Pin to 11/16” AES Box Assy......................................................AS10007 ............................................ B-133⁄4” GO Box to 11/16” AES Box Assy....................................................AS10009 ............................................. B-133⁄4” GO Pin to 11/16” AES Pin Assy.......................................................AS10008 ............................................. B-153⁄4” AES TD to 3⁄4” Pipe Recovery Systems Chemical Cutter....AS20012 ............................................. B-173⁄4” GO Box to 3⁄4” Pipe Recovery Systems Chemical Cutter...AS20013 ............................................. B-173⁄4” GO Pin to 3⁄4” Pipe Recovery Systems Chemical Cutter....AS20011 ............................................. B-195/8” AES Pin to 3⁄4” Pipe Recovery Systems Chemical Cutter..AS20001 ............................................. B-21AES 1” Tear Drop to 1” GO Pin Assy......................................................AS30001 ............................................. C-331”AES Tear Drop to 1” GO Box.................................................................AS30036 ............................................ C-331” GO Double Pin Assy................................................................................AS30005 ............................................. C-351” GO Double Box Assy..............................................................................AS30018 ............................................. C-351” GO Firing Sub Assy.................................................................................AS30007 ............................................. C-371” Double Sealed Tear Drop Assy..........................................................AS30042 ............................................. C-395/8” Sucker Rod Box to 1” GO Box........................................................AS30019 ............................................. C-415/8” Sucker Rod Pin to 1” GO Box.........................................................AS30020 ............................................. C-415/8” Sucker Rod Box to 1” GO Pin Assy..............................................AS30021 ............................................. C-415/8” Sucker Rod Pin to 1” GO Pin Assy................................................AS30026 ............................................. C-41AES 11/16” Pin to 1” GO Box Assy.........................................................AS00010 ............................................. C-31AES 11/16” Box to 1” GO Pin Assy.........................................................AS30034 ............................................. C-311 3/8” AES Tear Drop Sub Complete Assy.........................................AS40001 .............................................D-411 3/8” Double GO Pin Sub Assy..............................................................AS40005 .............................................D-431 3/8” Double GO Box Sub Assy.............................................................AS40022 .............................................D-431 3/8” Double Sealed Tear Drop Assy.................................................AS40027 .............................................D-451 3/8” GO Box/TD w/Pressure Connector & Ground Screw......AS40103 .............................................D-471 3/8” GO Pin/TD w/Pressure Connector & Ground Screw.......AS40104 ..............................................D-491” GO Box to 1 3/8” GO Box Assy..........................................................AS40030 .............................................D-511” GO Pin to 1 3/8” GO Pin Assy.............................................................AS40045 .............................................D-511 3/8” Atlas Box to 1 3/8” GO Pin Assy................................................AS40010 .............................................D-531 3/8” Tear Drop to 1 3/8” Atlas Box Assy.........................................AS40011 .............................................D-531 3/8” Atlas Pin to 1 3/8” GO Box Assy................................................AS40021 .............................................D-551 3/8” Atlas Pin to 1 3/8” GO Pin Assy.................................................AS40008 .............................................D-555/8” Sucker Rod Pin to 1 3/8” Atlas Box.............................................AS40028 .............................................D-575/8” Sucker Rod Box to 1 3/8” Atlas Box...........................................AS40029 ..............................................D-575/8” Sucker Rod Double Box...................................................................AS40037 .............................................D-575/8” Sucker Rod Box to 5/8” Sucker Rod Pin...................................AS40038..............................................D-575/8” Sucker Rod Box to 1 3/8” McCullough Pin..............................AS40040 .............................................D-575/8” Double Sucker Rod Pin.....................................................................AS40093 .............................................D-571 3/8” Schlumberger Box to 1 3/8” Tear Drop Sub Assy............AS40048 .............................................D-591 3/8” Schlumberger Pin to 1 3/8” Tear Drop Sub Assy..............AS40049 .............................................D-591 3/8” Schlumberger Box to 1 3/8” GO Pin Assy............................AS40012 .............................................D-61

Page 426: AES Catalog

IndexSECTION 1

1-6Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS (continued)1 3/8” Schlumberger Pin to 1 3/8” GO Pin Assy..............................AS40052 .............................................D-611 3/8” GO Pin to 1 3/8” McCullough Pin Assy..................................AS40039 .............................................D-631 3/8” GO Box to 1 3/8” McCullough Box Assy...............................AS40013 ..............................................D-651 3/8” SIE Box to 1 3/8” GO Box Assy..................................................AS40031 .............................................D-671 3/8” Sondex Pin To GO Box..................................................................AS40106 .............................................D-711 3/8” GO Pin to Sondex Box..................................................................AS40105 ..............................................D-735/8” Sucker Rod Box to 1 3/8” GO Box Assy....................................AS40023 ..............................................D-695/8” Sucker Rod Pin to 1 3/8” GO Box Assy......................................AS40024 .............................................D-695/8” Sucker Rod Box to 1 3/8” GO Pin Assy......................................AS40025 .............................................D-695/8” Sucker Rod Pin to 1 3/8” GO Pin Assy........................................AS40044.............................................D-691 7/16” Tear Drop Sub Complete Assy...............................................AS50014...............................................E-231 7/16” GO Tear Drop Sub High Amp..................................................AS50014HA ........................................E-291 7/16” Tear Drop Sub To 1 3/8” GO Box Assy................................AS50029 ..............................................E-231 7/16” GO Double Pin Assy.....................................................................AS50025 ..............................................E-251 7/16” GO Double Box Assy...................................................................AS50026 ..............................................E-251 7/16” Double Sealed Tear Drop Assy..............................................AS50028 ...............................................E-271 7/16” Double Sealed Tear Drop w/Adjustment Ring................AS50030 ..............................................E-311 7/16” GO Double Pin Sub w/Adjustment Ring.............................AS50031 ..............................................E-311 7/16” GO Pin to 1” GO Box Assy.........................................................AS50001 ..............................................E-331 7/16” GO Box to 1” GO Pin Assy.........................................................AS50007 ..............................................E-331 11/16” AES Tear Drop Sub to 1 3/8” GO Box Assy.....................AS60065 ..............................................F-791 11/16” AES Tear Drop Sub Assy.........................................................AS60037 ..............................................F-791 11/16” GO Double Box Assy.................................................................AS60060 ..............................................F-811 11/16” Go Double Pin Assy...................................................................AS60070 ..............................................F-811 11/16” Go Box/TD w/Pressure Connection & Ground Screw.AS60085 ............................................F-831 11/16” GO Pin/TD w/Pressure Connection & Ground Screw..AS60086 ............................................F-851 1⁄2” GO Low Pressure Firing Sub Assy.............................................AS80001 ..............................................F-871 1⁄2” GO High Pressure Firing Sub Assy...........................................AS80005 ...............................................F-871 11/16” Go Firing Sub Assy....................................................................AS60076 ..............................................F-891 1⁄2” GO Firing Sub to Atlas Sub Assy...............................................AS80007 ...............................................F-911 9/16” RTG Tandem Sub Assy...............................................................AS60045 ..............................................F-931 9/16” RTG Lower Blast Sub .................................................................AS60047 ..............................................F-931 9/16” RTG Top Sub Assy........................................................................AS60046 ...............................................F-931 9/16” RTG Bull Plug Assy.......................................................................AS60048 ...............................................F-931 9/16” Lower Decentralizer Adapter.................................................AS60049 ...............................................F-931 9/16” Lower Blast Sub w/GO Box.....................................................AS60071 ...............................................F-931 11/16” Schlumberger Pin to 1 3/8” Go Box Assy.......................AS60079 ...............................................F-951 11/16” Schlumberger Box to 1 3/8” GO Pin Assy......................AS60001 ...............................................F-971 11/16” Schlumberger Pin to 1 3/8” GO Pin Assy........................AS60018 ..............................................F-973⁄4” Sucker Rod Pin to 1 3/8” GO Pin Assy........................................AS80002 ...............................................F-993⁄4” Sucker Rod Box to 1 3/8” Box Pin Assy.....................................AS80003 ...............................................F-993⁄4” Sucker Rod Box to 1 3/8” GO Pin Assy.......................................AS80006 ..............................................F-993 1⁄4” Quick Change Assy.........................................................................AS90028 .............................................G-413 1/8” Quick Change Assy........................................................................AS90029 .............................................G-432 1⁄2” Quick Change Box to GO Box....................................................AS70013 ..............................................G-451 3⁄4” Double Quick Change Pin Assy.................................................AS70007 .............................................G-47

Page 427: AES Catalog

IndexSECTION 1

1-7Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

ADAPTORS, CROSSOVERS, FIRING AND GUN SUBS (continued) 1 3⁄4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Pin Assy.......AS70002 ..............................................G-491 3⁄4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO TD Assy........AS70003 ..............................................G-491 3⁄4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Box Assy......AS70004 .............................................G-492” RTG Tandem Sub Assy..........................................................................AS90031 .............................................G-512” RTG Bottom Adaptor Sub Assy.........................................................AS90042 .............................................G-512” RTG Bull Plug Assy..................................................................................AS90033 ..............................................G-512” RTG Top Sub Assy...................................................................................AS90032 ..............................................G-51#10 Baker Firing Head to GO Quick Change Assy........................AS100005 .......................................... G-53#20 Baker Firing Head to GO Quick Change Assy........................AS100004 ...........................................G-53#10 Baker Firing Head Setting Tool Assy..........................................AS100006 ...........................................G-55#20 Baker Firing Head Setting Tool Assy .........................................AS100001 ...........................................G-57#10 Baker Firing Head to GO Quick Change Assy .......................AS100002 ...........................................G-59#20 Baker Firing Head to GO Quick Change Assy........................AS100003 ...........................................G-59

PANELSPortable Shooting Supply Panel...........................................................PSS00 .......................................................H-1Portable Free Point Casing Collar Locator Panel..........................PFPCCL00...............................................H-3Portable Free Point Casing Collar Locator Panel..........................PFPCCL00-1 5/8” ................................H-5Portable Free Point Panel.........................................................................PFP00 ......................................................H-7Portable Free Point Panel.........................................................................PFP00-1 5/8” ........................................H-9PCP00............................Portable Combination Panel - FP, Collar Locator & SHooting Supply.........H-11PCP00-1 5/8”..............Portable Combination Panel – FP, Collar Locator & Shooting Supply ........H-13PFPCCL01 ...................Universal Portable FP Casing Collar Locator Panel.............................................H-15FPCCLRM00................Standard Free Point Casing Collar Locator Rackmount Panel ......................H-17FPCCLRM00-1 5/8” .Standard Free Point Casing Collar Locator Rackmount Panel ......................H-19FPIP001..........................Motorized Free Point Panel ...........................................................................................H-21PAS00 ............................Portable Speaker System ...............................................................................................H-23GRD00 ...........................Grounding Reel ...................................................................................................................H-25

Page 428: AES Catalog
Page 429: AES Catalog

IndexSECTION 2

2-1Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

AS0AS00001 .....................AES 5/8” Tear Drop ............................................................................................................. A-33AS00003 .....................5/8” Cable Head Assy (Clamp Ring) ................................................................................A-1AS00004......................AES 5/8”x2 1/2’ Sinker Bar Assy .......................................................................................A-3AS00005......................5/8”Casing Locator ................................................................................................................A-5AS00006 .....................AES 5/8” Bull Plug ................................................................................................................ A-37AS00007 .....................AES 5/8” Tear Drop w/Pressure Connector. ............................................................. A-33AS00008 .....................5/8” Pin To JRC Cutter Assy ............................................................................................. A-29AS00009 .....................AES 5/8” Double Box Sub ................................................................................................. A-35AS00010 .....................AES 11/16” Pin to 1” GO Box Assy ................................................................................ C-31 11/16” Pipe Recovery System Chemical Cutter AS00011.........................................to 5/8” AES Tear Drop ..................................................................................... A-31AS00012.........................................to Pressure Connector .................................................................................... A-31AS00013 .....................AES 5/8”x3’ Sinker Bar Assy ...............................................................................................A-3AS00014 .....................AES 5/8” Double Pin Sub .................................................................................................. A-35AS00015......................11/16” Pipe Recovery System Chemical CutterTo 5/8” AES Pin ..................... A-31AS00019......................5/8” Resistor Sub Complete Assy ................................................................................. A-27AS1AS100FP .....................11/16” Free Point Complete Assy ................................................................................. A-11AS100FPM .................11/16” Free Point Complete w/Magnetic Section ................................................. A-11AS10001......................11/16” CCL Complete Assy (NG) .......................................................................................A-7AS10002 .....................11/16” Slack Joint Section Complete Assy .............................................................. A-13AS10003 .....................11/16” Upper Bow Spring Complete Assy ................................................................ A-15AS10004 .....................11/16” Free Point Sensor Section Complete Assy ................................................ A-17AS10005 .....................11/16” Lower Bow Spring Complete Assy ................................................................ A-19AS10006......................11/16” Cable Head Assy (Clamp Ring) ..........................................................................A-1AS10007 .....................3⁄4” GO Pin to 11/16” AES Box Assy ............................................................................. B-13AS10008......................3⁄4” GO Pin to 11/16” AES Pin Assy .............................................................................. B-15AS10009......................3⁄4” GO Box to 11/16” AES Box Assy ........................................................................... B-13AS10010......................11/16” Upper Magnet Section Assy ............................................................................ A-21AS10011......................11/16” Lower Magnet Section Assy ............................................................................ A-21AS10012......................11/16” Magnet Extension Assy ...................................................................................... A-21AS10013......................AES 11/16”x 3’ Sinker Bar Assy.........................................................................................A-3AS10014......................11/16” AES Tear Drop Sub Complete Assy ............................................................... A-25AS10015......................11/16” Shot Rod Hanger Sub Assy (1/2” -20 V Threads) .................................... A-23AS10016 .....................11/16” Shot Rod Hanger Assy (1/4” Rod) .................................................................. A-23AS10018......................11/16” Casing Collar Locator Shooting Assy (G) .......................................................A-9AS100001...................#20 Baker Firing Head Setting Tool Assy ..................................................................G-57AS100002...................#10 Baker Firing Head to GO Quick Change Assy ................................................G-59AS100003...................#20 Baker Firing Head to GO Quick Change Assy ................................................G-59AS100004...................#20 Baker Firing Head to GO Quick Change Assy ................................................G-53AS100005...................#10 Baker Firing Head to GO Quick Change Assy ................................................G-53AS100006...................#10 Baker Firing Head Setting Tool Assy ..................................................................G-55AS100012QC.............3 1⁄8” AES Swivel ...................................................................................................................G-27AS100012-2 7/8......2 7/8” Conductor Swivel Assembly ..............................................................................G-39AS100013HD.............3 1/8” Shock Absorber Complete Assy ......................................................................G-37

<< Return to Main Menu

Page 430: AES Catalog

IndexSECTION 2

2-2

AS2AS20001......................5/8” AES Pin to 3⁄4” Pipe Recovery Systems Chemical Cutter ......................... B-21AS20002......................3⁄4” GO Tear Drop Assy ........................................................................................................B-7AS20004......................3/4” Cable Head Assy (Clamp Ring) ................................................................................B-1AS20005......................3/4”x5’ Steel Sinker Bar Assy .............................................................................................B-3AS20006......................3⁄4” Double GO Pin Assy .................................................................................................... B-11AS20007......................3/4” Casing Locator (G) ........................................................................................................B-5AS20008......................3⁄4” Double GO Box Assy .................................................................................................. B-11AS20011......................3⁄4” GO Pin to 3⁄4” Pipe Recovery Systems Chemical Cutter ........................... B-19AS20012......................3⁄4” AES TD to 3⁄4” Pipe Recovery Systems Chemical Cutter ........................... B-17AS20013......................3⁄4” GO Box to 3⁄4” Pipe Recovery Systems Chemical Cutter .......................... B-17AS20014......................3⁄4” GO Tear Drop to 11/16” AES Pin ..............................................................................B-9AS20016......................3⁄4” Goex Severing Tool Tear Drop To 11/16” AES Pin ...........................................B-9AS3AS300FP.......................1” Free Point Complete Assy .............................................................................................C-9AS300FPM...................1” Free Point Complete Magnet Section ......................................................................C-9AS30001.......................1” GO Tear Drop to 1” GO Pin Assy ............................................................................. C-33AS30003......................1” Cable Head Assy (Clamp Ring) ....................................................................................C-1AS30004......................1”x5’ Sinker Bar Assy .............................................................................................................C-3AS30005......................1” GO Double Pin Assy ....................................................................................................... C-35AS30006......................1” GO Bull Plug Assy ........................................................................................................... C-21AS30007......................1” GO Firing Sub Assy......................................................................................................... C-37AS30008......................1” Casing Collar Locator Assy (NG) .................................................................................C-5AS30009......................1” Slack Joint Complete Assy ......................................................................................... C-11AS30011......................1” Free Point Sensor Section Complete Assy (Boot) ............................................. C-17AS30011PC.................1” Free Point Sensor Section Complete Assy (Piston) ......................................... C-19AS30012......................1” Upper or Lower Bow Spring Section Assy .......................................................... C-13AS30014......................1” Casing Collar Locator Assy (G).....................................................................................C-7AS30016......................1x5’ Tungsten Sinker Bar Assy ..........................................................................................C-3AS30017......................1”x7’ Tungsten Sinker Bar Assy ........................................................................................C-3AS30018......................1” GO Double Box Assy ..................................................................................................... C-35AS30019......................5/8” Sucker Rod Box to 1” GO Box ............................................................................... C-41AS30020......................5/8” Sucker Rod Pin to 1” GO Box ................................................................................ C-41AS30021......................5/8” Sucker Rod Box to 1” GO Pin Assy ...................................................................... C-41AS30022......................1” AES Combination Diode Sub Assy .......................................................................... C-23AS30023 .....................1” Knuckle Joint Complete Assy Clvs .......................................................................... C-27AS30026 .....................5/8” Sucker Rod Pin to 1” GO Pin Assy ....................................................................... C-41AS30031 .....................1” Upper Magnet Section Complete Assy ................................................................ C-15AS30032 .....................1” Lower Magnet Section Complete Assy ................................................................ C-15AS30033 .....................1” Magnet Tool Extension Complete Assy ................................................................ C-15AS30034 .....................11/16” AES Box to 1” GO Pin Assy......................................................... ....................... C-31AS30036 .....................1” GO Tear Drop to 1” GO Box ........................................................................................ C-33AS30037 .....................1” Shot Rod Hanger Assembly (3/8” Rod) ................................................................. C-25AS30042 .....................1” GO Double Sealed Tear Drop Assy ......................................................................... C-39AS30043.......................1” Swivel Assembly ............................................................................................................ C-29

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 431: AES Catalog

IndexSECTION 2

2-3

AS4AS400FP-16 ..............1 3/8” Free Point Complete with 16” Stroke ......................... ...................................D-13AS400FPM .................1/38” Free Point Complete w/Magnetic Sections .................................................D-13AS40001 .....................1 3/8” GO Tear Drop Sub Complete Assy..................................................................D-41AS40003 .....................1 3/8” Cable Head Assy (Clamp Ring) ............................................................................D-3AS40004 .....................1 3/8”x5’ Steel Sinker Bar Assy .........................................................................................D-7AS40005 .....................1 3/8” Double GO Pin Sub Assy .....................................................................................D-43AS40008 .....................1 3/8” Atlas Pin to 1 3/8” GO Pin Assy ........................................................................D-55AS40009......................1 3/8” x 5’ Tungsten Sinker Bar Assy .............................................................................D-7AS40010 .....................1 3/8” Atlas Box to 1 3/8” GO Pin Assy .......................................................................D-53AS40011 .....................1 3/8” Tear Drop to 1 3/8” Atlas Box Assy ................................................................D-53AS40012 .....................1 3/8” Schlumberger Box to 1 3/8” GO Pin Assy ...................................................D-61AS40013 .....................1 3/8” GO Box to 1 3/8” McCullough Box Assy .......................................................D-65AS40015.......................1 3/8” x 7’ Tungsten Sinker Bar Assy ............................................................................D-7AS40016 .....................1 3/8” Slack Joint Assy ......................................................................................................D-17AS40017......................1 3/8” Upper & Lower Bow Spring Complete Assy (3 Spring) ..........................D-19AS40017-4.................1 3/8” Upper & Lower Bow Spring Complete Assy (4 Spring)...........................D-21AS40018 .....................1 3/8” Free Point Sensor Section Complete Assy (Boot ) ...................................D-29AS40020 .....................1 3/8” Bull Plug Complete Assembly ...........................................................................D-31AS40021 .....................1 3/8” Atlas Pin to 1 3/8” GO Box Assy .......................................................................D-55AS40022 .....................1 3/8” Double GO Box Sub Assy ....................................................................................D-43AS40023 .....................5/8” Sucker Rod Box to 1 3/8” GO Box Assy ............................................................D-69AS40024 .....................5/8” Sucker Rod Pin to 1 3/8” GO Box Assy .............................................................D-69AS40025 .....................5/8” Sucker Rod Box to 1 3/8” GO Pin Assy .............................................................D-69AS40027 .....................1 3/8” GO Double Sealed Tear Drop Assy .................................................................D-45AS40028 .....................5/8” Sucker Rod Pin to 1 3/8” Atlas Box ....................................................................D-57AS40029 .....................5/8” Sucker Rod Box to 1 3/8” Atlas Box ...................................................................D-57AS40030 .....................1” GO Box to 1 3/8” GO Box Assy .................................................................................D-51AS40031 .....................1 3/8” SIE Box to 1 3/8” GO Box Assy .........................................................................D-67AS40035 .....................1 3/8” Combination Diode Assy ....................................................................................D-33AS40037 .....................5/8” Sucker Rod Double Box ..........................................................................................D-57AS40038 .....................5/8” Sucker Rod Box to 5/8” Sucker Rod Pin ...........................................................D-57AS40039 .....................1 3/8” GO Pin to 1 3/8” McCullough Pin Assy ..........................................................D-63AS40040 .....................5/8” Sucker Rod Box to 1 3/8” McCullough PinD-24 ...........................................D-57AS40044 .....................5/8” Sucker Rod Pin to 1 3/8” GO Pin Assy ...............................................................D-69AS40045 .....................1” GO Pin to 1 3/8” GO Pin Assy ....................................................................................D-51AS40046 ......................1 3/8” GO Split Cable Head ...............................................................................................D-5AS40048 .....................1 3/8” Schlumberger Box to 1 3/8” Tear Drop Sub Assy....................................D-59AS40049 .....................1 3/8” Schlumberger Pin to 1 3/8” Tear Drop Sub Assy .....................................D-59AS40052 .....................1 3/8” Schlumberger Pin to 1 3/8” GO Pin Assy .....................................................D-61AS40073 .....................1 3/8” Magnetic Decentralizer (Channel) ..................................................................D-37AS40085 .....................1 3/8” AES Free Point Upper Magnet Section .........................................................D-27AS40086 .....................1 3/8” AES Free Point Lower Magnet Section .........................................................D-27AS40087 .....................1 3/8” AES Free Point Magnet Tool Extension ........................................................D-27AS40088 ......................1 3/8” Casing Bow Spring Section Assy (3 Spring) ...............................................D-23AS40088-4..................1 3/8” Casing Bow Spring Section Assy (4 Spring) ...............................................D-25

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 432: AES Catalog

IndexSECTION 2

2-4

AS4 CONTINUEDAS40091 .....................1 3/8” Casing Collar Locator Assy (G) ............................................................................D-9AS40095......................1 3/8” Cable Head Assy (Cone & Washer) ...................................................................D-1AS40092 .....................1 3/8” Casing Collar Locator Assy (NG)............................................... .......................D-11AS40093 .....................5/8” Double Sucker Rod Pin ............................................................................................D-57AS40096 .....................1 3/8” Shot Rod Hanger Assy (3/8” Rod) ...................................................................D-35AS70098.......................1 3/8” x 5’ Lead Sinker Bar Assy ......................................................................................D-7AS40099.........................1 3/8” x 7’ Lead Sinker Bar Assy.....................................................................................................D-7AS40101 ........................1 3/8” GO Pin to Double Sealed Tear Drop Decentralizer ........................................... D-39AS40103 .....................1 3/8” GO Box/TD w/Pressure Connector & Ground Screw .............................D-47AS40104 .....................1 3/8” GO Pin/TD w/Pressure Connector & Ground Screw ..............................D-49AS40105 .....................1 3/8” TO GO Pin To Sondex Box ...................................................................................D-73AS40106 .....................1 3/8” Sondex Pin To GO Box .........................................................................................D-71AS5AS50001 .....................1 7/16” GO Pin to 1” GO Box Assy .................................................................................E-33AS50004 .....................1 7/16”x5’ Tungsten Sinker Bar Assy ............................................................................. E-7AS50005 .....................1 7/16”x7’ Tungsten Sinker Bar Assy ............................................................................. E-7AS50006 .....................1 7/16” Casing Collar Locator Assy (NG) ...................................................................... E-9AS50007 .....................1 7/16” GO Box to 1” GO Pin Assy .................................................................................E-33AS50008 .....................1 7/16” Casing Collar Locator Assy (G) .......................................................................E-11AS50009 .....................1 7/16” GO Split Cable Head.............................................................................................. E-5AS50012 .....................1 7/16” Cable Head Assy (Cone & Washer) ................................................................ E-1AS50013 .....................1 7/16” Cable Head Assy (Clamp Ring) ......................................................................... E-3AS50014 .....................1 7/16” GO Tear Drop Sub Complete Assy ................................................................E-23AS50014HA................1 7/16” GO Tear Drop Sub High Amp ..........................................................................E-29AS50015BJ ................1 7/16” Knuckle Joint Complete Assy .........................................................................E-21AS50016 .....................1 7/16”x5’ Steel Sinker Bar Assy ...................................................................................... E-7AS50021 .....................1 7/16”x5’ Lead Sinker Bar Assy ...................................................................................... E-7AS50022 .....................1 7/16”x7’ Lead Sinker Bar Assy ...................................................................................... E-7AS50023 .....................1 7/16” Contact Centralizer Assy (w/o Springs) ......................................................E-17AS50025 .....................1 7/16” GO Double Pin Assy .............................................................................................E-25AS50026 .....................1 7/16” GO Double Box Assy ...........................................................................................E-25AS50028 .....................1 7/16” GO Double Sealed Tear Drop Assy ...............................................................E-27AS50029 .....................AES 1 7/16” Tear Drop Sub To 1 3/8” GO Box Assy ...............................................E-23AS50030 .....................1 7/16” Double Sealed Tear Drop w/Adjustment Ring ........................................E-31AS50031 .....................1 7/16” GO Double Pin Sub w/Adjustment Ring .....................................................E-31AS50032 .....................1 7/16” Wireline Skate, 1 5/8” Drift ...............................................................................E-19AS50033 .....................1 1⁄2” Wireline Skate, 1.71” Drift.....................................................................................F-71AS50034 .....................1 7/16” Mechanical Decentralizer ................................................................................E-13AS50035 .....................1 7/16” Mechanical Decentralizer Bottom................................................................E-15AS50037......................1 7/16” Tear Droop GO Pin ...............................................................................................E-13AS6AS600FP-16 ..............1 5/8” Free Point Complete Assy 16” Stroke.............................................................F-15AS600FPM .................1 5/8” Free Point Complete Assy 16” Stroke w/Magnets ....................................F-15AS600FP-36PCHP ..1 5/8” High Pressure Free Point Tool (36” Stroke) ...................................................F-37AS6003OTL.................5’ OTL Tungsten Sinker Bar Assy ..................................................................................... F-5

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 433: AES Catalog

IndexSECTION 2

2-5Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

AS6 CONTINUEDAS6004OTL.................7’ OTL Tungsten Sinker Bar Assy ..................................................................................... F-5AS60001 .....................1 11/16” Schlumberger Box to 1 3/8” GO Pin Assy ...............................................F-97AS60002 .....................1 11/16”x5’ Steel Sinker Bar Assy .................................................................................... F-7AS60003 .....................1 11/16”x5’ Tungsten Sinker Bar Assy .......................................................................... F-7AS60004 .....................1 11/16”x7’ Tungsten Sinker Bar Assy .......................................................................... F-7AS60005 .....................1 11/16” Casing Collar Locator (G) ................................................................................F-15AS60018 .....................1 11/16” Schlumberger Pin to 1 3/8” GO Pin Assy ................................................F-97AS60030 .....................1 11/16” Magnetic Decentralizer (Channel)..............................................................F-53AS60033 .....................1 11/16”x5’ Lead Sinker Bar Assy.................................................................................... F-7AS60034 .....................1 11/16”x7’ Lead Sinker Bar Assy.................................................................................... F-7AS60036 .....................1 11/16” Cable Head Assy (Clamp Ring) ...................................................................... F-3AS60037 .....................1 11/16” GO Tear Drop Sub Assy ...................................................................................F-79AS60045 .....................1 9/16” RTG Tandem Sub Assy .......................................................................................F-93AS60046 .....................1 9/16” RTG Top Sub Assy .................................................................................................F-93AS60047 .....................1 9/16” RTG Lower Blast Sub ..........................................................................................F-93AS60048 .....................1 9/16” RTG Bull Plug Assy....................................................................... .........................F-93AS60049 .....................1 9/16” Lower Decentralizer Adaptor Assy...................................... .........................F-93AS60057 .....................1 9/16” Bottom Decentralizer (Channel) ....................................................................F-51AS60059 .....................1 11/16” Cable Head Assy (Cone & Washer) .............................................................. F-1AS60060 .....................1 11/16” GO Double Box Assy................................................................ .........................F-81AS60061 .....................1 11/16” Bottom Decentralizer (Channel)..................................................................F-51AS60062BS.................1 11/16” Knuckle Joint Complete Assy ......................................................................F-67AS60065 .....................1 11/16” GO Tear Drop Sub to 1 3/8” GO Box Assy ...............................................F-79AS60066 .....................1 11/16” Contact Centralizer (w/o Springs) ..............................................................F-59AS60067 .....................1 9/16” Magnetic Decentralizer (Channel) ................................................................F-47AS60070 .....................1 11/16” Go Double Pin Assy ...........................................................................................F-81AS60071 .....................1 9/16” Lower Blast Sub w/GO Box ..............................................................................F-93AS60072 .....................1 11/16” Magnetic Decentralizer (Button)...................... ...........................................F-55AS60074 .....................1 9/16” Bottom Decentralizer (Button) .......................................................................F-49AS60076 .....................1 11/16” Go Firing Sub Assy ............................................................................................F-89AS60077 .....................1 9/16” Wireline Skate, 1.81” Drift .................................................................................F-73AS60079 .....................1 11/16” Schlumberger Pin to 1 3/8” Go Box Assy....................... .........................F-95AS60080 .....................1 11/16” OTL Go Knuckle Joint Assy ............................................................................F-65AS60081 .....................1 11/16” GO Split Cable Head ........................................................................................... F-5 1 11/16” GO Box to Double Sealed Tear Drop AS60082.......................................Magnetic Decentralizer (Channel) ...............................................................F-57AS60083......................1 5/8” Wireline Skate, 1.875” Drift .................................................................................F-75AS60085 .....................1 11/16” Go Box/TD w/Pressure Connection & Ground Screw .......................F-83AS60086 .....................1 11/16” GO Pin/TD w/Pressure Connection & Ground Screw ........................F-85AS60091 .....................1 11/16” Roller Centralizer ...............................................................................................F-61AS60092 .....................5/8” AES Sensor Section (Boot) .......................................................................................F-29 AS60092PCHP .........1 5/8” Sensor Section (Piston) HP ..................................................................................F-41AS60093 .....................1 5/8” Upper & Lower Bow Spring Assy .....................................................................F-19AS60093C...................1 5/8” Casing Bow Spring Section Assy ......................................................................F-21AS60093HP ...............1 5/8” High Pressure Bow Spring ..................................................................................F-23

Page 434: AES Catalog

IndexSECTION 2

2-6Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

AS6 CONTINUEDAS60093HPC.............1 5/8” High Pressure Casing Bow Spring ...................................................................F-25AS60094-16 ..............1 5/8” Slack Joint Assy (16” Stroke) ..............................................................................F-17AS60094-36HP ........1 5/8” High Pressure Slack Joint (36” Stroke) ...........................................................F-39AS60095 .....................1 5/8” AES Free Point Magnet Tool Extension .........................................................F-27AS60096 .....................1 5/8” AES Free Point Upper Magnet Section ..........................................................F-27AS60097 .....................1 5/8” AES Free Point Lower Magnet Section ..........................................................F-27AS60100 .....................1 5/8” Bull Plug Complete Assembly.................................................... ........................F-31AS60100HP ...............1 5/8” High Pressure Grounded Bull Plug Assy .......................................................F-43AS60101 .....................1 5/8” Combination Diode Complete Assembly .....................................................F-33AS60101HP ...............1 5/8” High Pressure Comb Diode Sub .......................................................................F-45AS60102 .....................1 5/8” Casing Collar Locator Assy (NG) .......................................................................F-11AS60103 .....................1 5/8” Casing Collar Locator Assy (G) ............................................................................ F-9AS60104 .....................1 5/8” Shot Rod Hanger Assy (3/8” Rod) ....................................................................F-35AS60109 .....................1 11/16” x 1’ Pump Down Sub (Swab Mandrel) .................................................. F-103AS60110 .....................1 11/16” Knuckle Joint Assembly Clvs ..................................................................... F-101AS7AS70002 .....................1 3⁄4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Pin Assy ...............................G-49AS70003 .....................1 3⁄4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO TD Assy ................................G-49AS70004 .....................1 3⁄4” 3 3⁄4” GO Quick Change Pin to 1 7/16” GO Box Assy..............................G-49AS70005HD ..............1 11/16” Shock Absorber Sub Complete Assy .........................................................F-77AS70006 .....................1 11/16” Conductor Swivel Complete Assy ..............................................................F-69AS70007 .....................1 3⁄4” Double Quick Change Pin Assy. ........................................................................G-47AS70013 .....................2 1⁄2” Quick Change Box to GO Box ............................................................................G-45AS8AS80001......................1 1/2” GO Low Pressure Firing Sub ...............................................................................F-87AS80002 .....................3⁄4” Sucker Rod Pin to 1 3/8” GO Pin Assy .................................................................F-99AS80003 .....................3⁄4” Sucker Rod Box to 1 3/8” GO Pin Assy ...............................................................F-99AS80005 .....................1 1⁄2” GO High Pressure Firing Sub Assy ....................................................................F-87AS80006 .....................3⁄4” Sucker Rod Box to 1 3/8” GO Pin Assy ...............................................................F-99AS80007 .....................1 1⁄2” GO Firing Sub to Atlas Sub Assy ........................................................................F-91AS9AS90001 .....................2” x 5’ Tungsten Sinker Bar Assy......................................................................................G-1AS90002 .....................2” x 7’ Tungsten Sinker Bar Assy......................................................................................G-1AS90003 .....................2” Magnetic Decentralizer (Channel) ..........................................................................G-17AS90021 .....................3 1/4” Casing Collar Locator Assy (G) ............................................................................G-5AS90021-1 .................3 1/4” Casing Collar Locator Coil & Magnet Assy (G) .............................................G-5AS90021-3 1/8 ........3 1/8” Casing Collar Locator Assy (G) ............................................................................G-7AS90023 .....................2” x 5’ Lead Sinker Bar Assy ...............................................................................................G-1AS90024 .....................2” x 7’ Lead Sinker Bar Assy ...............................................................................................G-1AS90028 .....................3 1⁄4” Quick Change Assy ................................................................................................G-41AS90029 .....................3 1/8” Quick Change Assy ...............................................................................................G-43AS90031 .....................2” RTG Tandem Sub Assy .................................................................................................G-51AS90032 .....................2” RTG Top Sub Assy ...........................................................................................................G-51AS90033 .....................2” RTG Bull Plug Assy ..........................................................................................................G-51AS90042 .....................2” RTG Bottom Adaptor Sub Assy ................................................................................G-51AS90043 .....................2” RTG Bottom Decentralizer (Channel) .....................................................................G-19

Page 435: AES Catalog

IndexSECTION 2

2-7

AS9 CONTINUEDAS90045 .....................2” Magnetic Decentralizer (Button) .............................................................................G-13AS90048 .....................2 1/8” Casing Collar Locator Assy (G) ............................................................................G-3AS90050 .....................2 3⁄4” Spring Centralizer ...................................................................................................G-21AS90050RA ...............2 3⁄4” Roller Centralizer .....................................................................................................G-23AS90053 .....................1 3⁄4” Wireline Skate, 2.125” Drift .................................................................................G-29AS90054 .....................2 1/16” Wireline Skate, 2.625” Drift .............................................................................G-31AS90062HDQC ........2 3⁄4” Shock Absorber Complete Assy .......................................................................G-35AS90065 .....................2 1/8” Shock Absorber Complete Assy ......................................................................G-33AS90066QC ...............2 3⁄4” Quick Change Knuckle Joint (Pin To Box). ....................................................G-25AS90071 .....................2” RTG Bottom Decentralizer (Button) ........................................................................G-15AS90080......................4 1/2” Casing Collar Locator Assy (Shooting) .............................................................G-9AS90090......................2 3/4” Casing Collar Locator Assy ................................................................................G-11FPFPI007..........................Motorized Free Point Indicator Tool Assy ..................................................................D-15PANELSPSS00 ...........................Portable Shooting Supply Panel ......................................................................................H-1PFPCCL00....................Portable Free Point Casing Collar Locator Panel.....................................................H-3PFPCCL00-1 5/8”......Portable Free Point Casing Collar Locator Panel ....................................................H-5PFP00.............................Portable Free Point Panel ..................................................................................................H-7PFP00-1 5/8” .............Portable Free Point Panel ...................................................................................................H-9PCP00............................Portable Combination Panel - FP, Collar Locator & SHooting Supply.........H-11PCP00-1 5/8”..............Portable Combination Panel – FP, Collar Locator & Shooting Supply ........H-13PFPCCL01 ...................Universal Portable FP Casing Collar Locator Panel.............................................H-15FPCCLRM00................Standard Free Point Casing Collar Locator Rackmount Panel ......................H-17FPCCLRM00-1 5/8” .Standard Free Point Casing Collar Locator Rackmount Panel ......................H-19FPIP001..........................Motorized Free Point Panel ...........................................................................................H-21PAS00 ............................Portable Speaker System ...............................................................................................H-23GRD00 ...........................Grounding Reel ...................................................................................................................H-25

Specifications: All tools rated to 21,000 psi and 500°F unless otherwise specified.

Page 436: AES Catalog

Pipe Recovery Technology & Wireline Accessories

Lafayette+1 337 837 2016+1 337 837 2429208 Ida RoadBroussard, LA 70518USA

Calgary+1 403 235 6533+1 403 387 3401#432, 2880 45th Ave SECalgary ABT2B 3M1Canada

Hampshire+44 (0) 1252 60 2200+44 (0) 1252 86 2339 Cody Technology ParkRange RoadFarnborough GU14 0FGUnited Kingdom

Conroe (South America)+1 936 756 2331+1 936 756 23432418 North Frazier Ste 101Conroe, TX 77303USA

Other sales and distribution locations included within the catalog.

The information contained herein is general in nature and is not intended for specific construction, installation or application purposes. GE reserves the right to make changes in specifications or add improvements at anytime without notice or obligation. GE, the GE Monogram, and imagination at work are registered trademarks of the General Electric Company. ©2011 General Electric CompanyAll Rights Reserved

GE imagination at work

GE Oil & Gas

Version 2013-1