Acceptance Qosac R2.2

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 1/29

Commissioning Guide

Alcatel-Lucent 1342 QoSAC R2.2

Contents REFERENCED DOCUMENTS............................................................................................................ 4 PREFACE ........................................................................................................................................ 5 ABBREVIATIONS / DEFINITIONS .................................................................................................... 5 1 INTRODUCTION ........................................................................................................................ 6

1.1 Document Purpose ........................................................................................................ 6 1.2 Document Scope ........................................................................................................... 6 1.3 Duration and pre-requisites ........................................................................................... 6 1.4 Document Conventions ................................................................................................ 6

1.4.1 Type Styles ................................................................................................................... 6 1.4.2 Symbols ....................................................................................................................... 7

2 TESTS SUMMARY AND TESTS SEQUENCE .................................................................................. 8 3 SHEET 1 – CHECKING HARDWARE COMPLETENESS ................................................................ 10

3.1 Purpose ...................................................................................................................... 10 3.2 Objects concerned ...................................................................................................... 10 3.3 Test resources ............................................................................................................ 10 3.4 Description of the operation ........................................................................................ 10

4 SHEET 2 – CHECKING SOFTWARE COMPLETENESS.................................................................. 11

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 2/29

4.1 Purpose ...................................................................................................................... 11 4.2 Objects concerned ...................................................................................................... 11 4.3 Test resources ............................................................................................................ 11 4.4 Description of the operation ........................................................................................ 11

5 SHEET 3 – CHECKING ALCATEL 1342 QOSAC START / STOP ................................................... 13 5.1 Purpose ...................................................................................................................... 13 5.2 Objects concerned ...................................................................................................... 13 5.3 Description of the operation ........................................................................................ 13

5.3.1 QoSAC Server Start/Stop by power off/on.................................................................. 13 5.3.2 System reboot ........................................................................................................... 13 5.3.3 Check Alcatel 1342 QoSAC server process activation ................................................ 13 5.3.4 Operator Work Place ................................................................................................. 14 5.3.5 Alcatel 1342 QoSAC graphical interface application Start/Stop................................... 14

6 SHEET 4 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – LAN/WAN OPERATION ... 15 6.1 Purpose ...................................................................................................................... 15 6.2 Objects concerned ...................................................................................................... 15 6.3 Test resources ............................................................................................................ 15 6.4 Description of the operation ........................................................................................ 15

7 SHEET 5 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – ADD / REMOVE OPERATOR16 7.1 Purpose ...................................................................................................................... 16 7.2 Objects concerned ...................................................................................................... 16 7.3 Test resources ............................................................................................................ 16 7.4 Description of the operation ........................................................................................ 16

8 SHEET 6 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO MANAGEMENT SERVICES....................................................................................................................................... 17

8.1 Purpose ...................................................................................................................... 17 8.2 Objects concerned ...................................................................................................... 17 8.3 Test resources ............................................................................................................ 17 8.4 Description of the operation ........................................................................................ 17

9 SHEET 7 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO OBSERVATION MONITORING............................................................................................................................... 18

9.1 Purpose ...................................................................................................................... 18 9.2 Objects concerned ...................................................................................................... 18 9.3 Test resources ............................................................................................................ 18 9.4 Description of the operation ........................................................................................ 18

10 SHEET 8 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO COUNTERS SELECTION AND USER DEFINED FORMULAS/REPORTS................................................................................... 19

10.1 Purpose ...................................................................................................................... 19 10.2 Objects concerned ...................................................................................................... 19 10.3 Test resources ............................................................................................................ 19 10.4 Description of the operation ........................................................................................ 19

11 SHEET 9 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO SUPERVISION SERVICES....................................................................................................................................... 20

11.1 Purpose ...................................................................................................................... 20 11.2 Objects concerned ...................................................................................................... 20 11.3 Test resources ............................................................................................................ 20 11.4 Description of the operation ........................................................................................ 20

12 SHEET 10 – CHECKING ALCATEL 1342 QOSAC OPERATION – SUPERVISION BY SENDING ALARM/EMAIL / SMS .................................................................................................................... 21

12.1 Purpose ...................................................................................................................... 21 12.2 Objects concerned ...................................................................................................... 21 12.3 Test resources ............................................................................................................ 21

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 3/29

12.4 Description of the operation ........................................................................................ 21 13 SHEET 11 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – BACKUP......................... 22

13.1 Purpose ...................................................................................................................... 22 13.2 Objects concerned ...................................................................................................... 22 13.3 Test resources ............................................................................................................ 22 13.4 Description of the operation ........................................................................................ 22

14 SHEET 12 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – RESTORE........................ 23 14.1 Purpose ...................................................................................................................... 23 14.2 Objects concerned ...................................................................................................... 23 14.3 Test resources ............................................................................................................ 23 14.4 Description of the operation ........................................................................................ 23

15 SHEET 13 – CHECKING ALCATEL 1342 QOSAC FULL – BACKUP .............................................. 24 15.1 Purpose ...................................................................................................................... 24 15.2 Objects concerned ...................................................................................................... 24 15.3 Test resources ............................................................................................................ 24 15.4 Description of the operation ........................................................................................ 24

16 SHEET 14 – CHECKING ALCATEL 1342 QOSAC FULL – RESTORE ............................................. 25 16.1 Purpose ...................................................................................................................... 25 16.2 Objects concerned ...................................................................................................... 25 16.3 Test resources ............................................................................................................ 25 16.4 Description of the operation ........................................................................................ 25

17 SHEET 15 – CHECKING ALCATEL 1342 QOSAC OPERATION – QOS MANAGEMENT ............... 26 17.1 Purpose ...................................................................................................................... 26 17.2 Objects concerned ...................................................................................................... 26 17.3 Test resources ............................................................................................................ 26 17.4 Description of the operation ........................................................................................ 26

18 SHEET 16 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO PLATFORM MANAGEMENT ............................................................................................................................. 27

18.1 Purpose ...................................................................................................................... 27 18.2 Objects concerned ...................................................................................................... 27 18.3 Test resources ............................................................................................................ 27 18.4 Description of the operation ........................................................................................ 27

19 SHEET 17 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO LOG MANAGEMENT28 19.1 Purpose ...................................................................................................................... 28 19.2 Objects concerned ...................................................................................................... 28 19.3 Test resources ............................................................................................................ 28 19.4 Description of the operation ........................................................................................ 28

20 END OF COMMISSIONING...................................................................................................... 29 21 CERTIFICATE OF COMMISSIONING ......................................................................................... 30

21.1 Signatures................................................................................................................... 30 21.2 Release ....................................................................................................................... 30 21.3 Tests results ............................................................................................................... 30 21.4 Comments................................................................................................................... 31

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 4/29

REFERENCED DOCUMENTS [1] 3BL 76300 CBAA PCZZA "Generic MPI" [2] 3B L76301 CBAA ADZZA "Alcatel 1342 QoSAC Customer Status Document" [3] 3BL 76300 CBAA AHZZA "Alcatel 1342 QoSAC Product Software Release" [4] 3BL 76505 BCAA PCZZA "Alcatel 1342 QoSAC Administration Guide" [5] 3BL 76504 BCAA PCZZA “Alcatel 1342 QoSAC Operator Guide” [6] 3BL 95489 BCAA PC ZZA “QoSAC Full Backup/Restore Guide”

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 5/29

PREFACE This document describes the commissioning tests of the Alcatel 1342 QoSAC R2.2 product. WARNING ALCATEL makes no warranty of any kind with regards to this manual, and specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. ALCATEL will not be liable for errors contained herein or for damages, whether direct, indirect, consequential, incidental, or special, in connection with the furnishing, performance, or use of this material. COPYRIGHT NOTIFICATION The technical information of this manual is the property of ALCATEL and must not be copied, reproduced or disclosed to a third party without written consent. Registered Trademarks − HP is a registered trademark of Hewlett-Packard Corporation. − Netscape is a trademark of Netscape Communications Corporation − Mozilla is a trademark of The Mozilla Organization − Internet Explorer, Windows© are trademarks of Microsoft Corporation − Java is a registered trademark of Sun Microsystems, Inc. − MySQL is a registered trademark of MySQL AB. − Linux is a registered trademark Linux Torvalds.

ABBREVIATIONS / DEFINITIONS 3PP Third Party Product GUI Graphical User Interface QoSAC Quality of Service Analysis Center OS Operating System OWP Operator Work Place

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 6/29

1 INTRODUCTION

1.1 Document Purpose This document contains a number of test sheets and applicable test sequence for commissioning of the Alcatel 1342 QoSAC (full delivery, not for upgrade). Commissioning consists in checking that the "stand-alone" Alcatel 1342 QoSAC delivery is complete and Alcatel 1342 QoSAC is operational by itself, regardless of OMC/NEs installation/commissioning. It follows Alcatel 1342 QoSAC installation, and can be seen as a pre-requisite to acceptance in a full network context. Therefore, this document does not cover full acceptance of Alcatel 1342 QoSAC that must be covered by network acceptance tests. Note Whether some of these test sheets are executed or not is left to the decision of the person carrying

out the tests. This person may also run their own tests provided that they do not damage the Alcatel 1342 QoSAC or adversely affect ALCATEL's "installation and customization" service.

1.2 Document Scope This document is applicable for Alcatel 1342 QoSAC R2.2. Note Some features may be in restriction, and therefore related test cases will be considered as not

applicable.

1.3 Duration and pre-requisites Tests described below are estimated at four days Alcatel staff in charge of commissioning must be experienced in Alcatel 1342 QoSAC administration/operation, and have a clear understanding of all documents specific to the delivery, in particular: − Administration and user guides (See Ref [4], [5] [5]). − Full Backup/Restore guides (See Ref [6])

1.4 Document Conventions The following conventions are used throughout the document.

1.4.1 Type Styles Different type styles, or fonts, have been used to distinguish between specific elements. − bold characters

Represent essential words and are used to emphasise or to introduce new terms. − bold courier character font

Represent characters that the installer has to type on the keyboard, usually HP-UNIX commands or answers in interactive steps.

− courier character font Represent the system response that is displayed on a monitor or terminal screen. Courier font is also used for command names, for file listing and for session output.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 7/29

− italic courier character font Used for variable input or output and must be replaced with suitable values.

1.4.2 Symbols The following symbols are used throughout the document. − ">” or “root>“ represents the UNIX prompt. − "[" and "]" symbols delimit keys and graphical push buttons. Note [Control]+[C] indicates you have to push and hold on the [Control] key first, push and relax the [C]

key, and then relax the [Control] key.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 8/29

2 TESTS SUMMARY AND TESTS SEQUENCE Test cases should be run in the order of the tables below (see explanatory comments in the right column).

Tests List SHEET Description Applicable section / Comments

Hardware completeness � Checking that the hardware delivery is complete

SHEET 1 <See section 3> Software completeness � Checking that the Software

delivery is complete SHEET 2 <See section 4>

Alcatel 1342 QoSAC start/stop � Checking Alcatel 1342 QoSAC server start/stop

SHEET 3 <See section 5> LAN / Wan aspects � Checking Alcatel 1342 QoSAC

LAN aspects SHEET 4 <See section 6> Mainly printer aspects.

Add / Remove operators � Check Adding/Removing of an operator

SHEET 5 <See section 7> Operator declared will be used in section 13

Access to Administration Services � Checking access to operation services

SHEET 6 <See section 8> This step includes Site/NE declaration. Site/NE declared will be used in section 10

Access to Observation Monitoring � Checking retrieval of observations and reports display

SHEET 7 <See section 9> This step includes the retrieval of observations from OMCs and the reports display

Access to counters selection and user defined formulas/reports

� Checking retrieval of observations and reports display

SHEET 8 <See section 10> This step includes the retrieval of observations from OMCs and the reports display

Access to Supervision Services � Checking adding/Removing of templates/Supervision

SHEET 9 <See section 11> This step includes the Template/Supervision management

Supervision by sending email / SMS � Checking sending email / sms of Supervision

SHEET 10 <See section 12> This step includes the Supervision management

Data Backup � Checking OS Data Backup SHEET 11 <See section 13> Data backup here includes operator, Site, NE, Template, Supervision declared in sections 7, 8 and 10. It includes also alarms, emails and sms generated by QoSAC and counters retrieved from OMC.

Data Restore � Checking OS Data Restore

SHEET 12 <See section 14> After OS Data restore, management data are again available. Alarms, emails, sms and counters stored before the backup are also available.

Full Backup � Checking OS Full Backup SHEET 13 <See section 15>

Full backup includes all system Full Restore Checking OS Full Restore SHEET 14 <See section 16>

QoS Management � Check create/modify/delete QoS

SHEET 15 <See section 17> Platform Managment � Checking retrieval of physical

drive, logical volume and CPU display

� Checking start/stop process

SHEET 16 <See section 18>

Log Managment � Check the display of the log file on the right part of the qosac pageweb

� QoSAC GUI events should have been correctly logged the Log table.

SHEET 17 <See section 19>

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 9/29

As a prerequisite to all tests, you must set customer passwords. All tests should be done with customer passwords, thus providing the guarantee that he has full access to the server: − Alcatel 1342 QoSAC server:

Log as root on Alcatel 1342 QoSAC server, change user password using standard UNIX passwd command, principally for the following user : - root user password (if not already set with customer at installation) - axadmin user password

Note User passwords in WEB portal will be changed in operators management test cases.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 10/29

3 SHEET 1 – CHECKING HARDWARE COMPLETENESS

3.1 Purpose Check hardware delivery completeness. Note QoSAC server internal completeness is not subject to commissioning.

3.2 Objects concerned − Server − Operator Work Places terminals (PC) − Access router − Hub(s) / Switches(s) − Printer(s)

3.3 Test resources N/A.

3.4 Description of the operation − the LAN where the Alcatel 1342 QoSAC server will be connected is part of client infrastructure. − Check presence of QoSAC server. It should be powered and connected on the LAN. − Check the presence of OMC(s) in the LAN.

Note There are 2 connections from the Server to the LAN: WEB Console and "normal" connection. − Check presence/number of PC OWPs.

They should be powered and connected on the LAN. Note The OWPs that have been delivered and installed by ALCATEL are the only ones involved in

this operation. − Check presence/number of Printer(s).

They should be powered and connected on the LAN. Note The printers that have been delivered and installed by ALCATEL are the only ones involved in

this operation. − Check presence of Access Router. As a convenience, Access Router is foreseen to be installed in the

QoSAC server rack. The customer may choose a different implementation. It should be powered and connected on the LAN. Note It may happen that for some customer, the Access Router is not provided by ALCATEL, but is

part of client infrastructure.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 11/29

4 SHEET 2 – CHECKING SOFTWARE COMPLETENESS

4.1 Purpose Check the software delivery completeness.

4.2 Objects concerned − Software CD-ROMs − User Documentation

4.3 Test resources − "Alcatel 1342 QoSAC Customer Status Document " (See Ref [2]) for Alcatel 1342 QoSAC CD-ROM

Media − "Alcatel 1342 QoSAC Product Software release" <See Ref [3]> for list of QoSAC server software

packages − Alcatel 1342 QoSAC User Documentation.

4.4 Description of the operation Using the above documents: − Check for the presence and identity of the software CD-ROM using "Alcatel 1342 QoSAC Customer

Status Document " (See Ref [2]) − Check for the presence and compliance of the ALCATEL Alcatel 1342 QoSAC User Documentation.

Alcatel 1342 QoSAC User Documentation is listed in the Alcatel 1342 QoSAC Catalogue referred in " Customer Status Document " (See Ref [2]). • Check presence of the ADES CD-ROM mentioned in " Customer Status Document " (See Ref [2])

that contains Documentation collection for on-line doc feature. • Check optional presence of paper copy of the user documentation.

− Check proper list of installed software on QoSAC server by comparing: • The result of software list in PSR <See Ref [3]>

• The mkcdrec release : − Login as root − Type the command:

cat /var/opt/mkcdrec/Config.sh | grep VERSION | grep -v LINUX • The list of packages actually installed on Alcatel 1342 QoSAC:

− Login as root − Type the command:

swlist • The QoSAC permanent process

− To check the status of QoSAC background processes, you can click on “QoSAC process stat summary ” link from QoSAC home page using Web browser: “http://<qosac-ip-address>/”.

• The apache tomcat version : grep –i version /alcatel/qosac/apache-tomcat-5.5.12/webapps/ROOT/RELEASE- NOTES.txt

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 12/29

• The sysstat release : − Login as root − Type the command:

# rpm -qa | grep sysstat • The hpacucli release :

− Login as root − Type the command:

# rpm -qa | grep hpacucli

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 13/29

5 SHEET 3 – CHECKING ALCATEL 1342 QOSAC START / STOP

5.1 Purpose Check that Alcatel 1342 QoSAC stops and starts properly. It covers: − QoSAC server:

• Stop/start (power off / on) • system reboot • Alcatel 1342 QoSAC software installation • Alcatel 1342 QoSAC application start / stop • Check server process activation

− PC Operator shutdown / restart

5.2 Objects concerned − QoSAC Server − All Operator Work Places (OWPs) − Alcatel 1342 QoSAC "root" and "axadmin" operators.

5.3 Description of the operation

5.3.1 QoSAC Server Start/Stop by power off/on − Switch the Server off; see Alcatel 1342 QoSAC User Documentation:

"Alcatel 1342 QoSAC Administration Guide" <See Ref > Chapter: “QoSAc server management procedures”

− Switch the Server on; see Alcatel 1342 QoSAC User Documentation: "Alcatel 1342 QoSAC Administration Guide" <See Ref [4]> Chapter: “QoSAc server management procedures”

5.3.2 System reboot − Reboot the system, see Alcatel 1342 QoSAC User Documentation:

"Alcatel 1342 QoSAC Administration Guide" <See Ref [4]> Chapter: “QoSAc server management procedures”

5.3.3 Check Alcatel 1342 QoSAC server process activation After a server reboot, all Alcatel 1342 QoSAC server processes are automatically re-started by Linux init procedure. Before opening a session on Alcatel 1342 QoSAC Operator Workplace, all these processes must be in running state. To check processes status: − Enter the “Alcatel 1342 QoSAC process state summary” link from WEB browser with Alcatel 1342

QoSAC homepage http://<Alcatel 1342 QoSAC IP address>/ − The line should contain :

-- QoSAC Applications – running

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 14/29

− Enter the “QoSAC platform management” link from WEB browser with Alcatel 1342 QoSAC homepage http://<Alcatel 1342 QoSAC IP address>/ with “guest” as login name.

Refer to Alcatel 1342 QoSAC User Documentation: "Administration Guide" <See Ref [4]> Chapter: " QoSAc server management procedures ".

Note Mysql and Apache processes appear in “QoSAC process state summary”. They are also directly started by Linux init procedure.

5.3.4 Operator Work Place Operator Work Place is a PC. There are no specificities for switching it on/off. Check they boot normally and check presence of Alcatel 1342 QoSAC required software (Start -> Control Panel -> add or Remove software) against the list given in "Alcatel 1342 QoSAC Product Software release" <Ref [3]>: − Browser (Mozilla, Netscape, Internet Explorer - Mozilla is recommended) − Java Runtime Environment (including Java Web Start) − Alcatel 1342 QoSAC setup binary

5.3.5 Alcatel 1342 QoSAC graphical interface application Start/Stop The Alcatel 1342 QoSAC home page allows to launch the Alcatel 1342 QoSAC graphical interface. − To start WEB portal, launch your WEB browser on Alcatel 1342 QoSAC home page, and use the link

named “Launch graphical interface” "Alcatel 1342 QoSAC Administration Guide" <See Ref [4]> Chapter: "How to open a QoSAC GUI session".

− To exit the Alcatel 1342 QoSAC portal, use the appropriate menu in application.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 15/29

6 SHEET 4 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – LAN/WAN OPERATION

6.1 Purpose Check accesses to the printers and access router.

6.2 Objects concerned − An Alcatel 1342 QoSAC administrator. − Printers − Access router

6.3 Test resources − OWP. − The Alcatel 1342 QoSAC User Documentation.

6.4 Description of the operation − From an OWP, Execute a printout of a file to the printer

• Print from the Alcatel 1342 QoSAC graphical interface. − Execute the Unix "ping" command to the access router. Check the response from the router.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 16/29

7 SHEET 5 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – ADD / REMOVE OPERATOR

7.1 Purpose Check the addition and removal of an Alcatel 1342 QoSAC operator.

7.2 Objects concerned − One Alcatel 1342 QoSAC operator.

7.3 Test resources − OWP. − The Alcatel 1342 QoSAC User Documentation.

7.4 Description of the operation − Launch the graphical interface from Alcatel 1342 QoSAC home page with “guest” as login name (see §

5.3.5). − Create several operators with a name, password. All the operators have the same profile. See Alcatel

1342 QoSAC User Documentation: "Alcatel 1342 QoSAC Administration Guide" <See Ref [4]>

− Open a session with one of the newly created operators. − Delete some previously created operator. See Alcatel 1342 QoSAC User Documentation:

"Alcatel 1342 QoSAC Administration Guide" <See Ref [4]>

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 17/29

8 SHEET 6 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO MANAGEMENT SERVICES

8.1 Purpose Check access to the "management services" from the Alcatel 1342 QoSAC operators. It includes creation of Sites and NEs.

8.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

8.3 Test resources − OWPs. − Alcatel 1342 QoSAC User Documentation.

8.4 Description of the operation − Open Alcatel 1342 QoSAC homepage. − From Alcatel 1342 QoSAC homepage on WEB browser, launch On-Line Documentation

Note This assumes that Documentation CD-ROM(s) is available and installed. − From the homepage, launch Alcatel 1342 QoSAC Graphical interface. See Alcatel 1342 QoSAC User

Documentation − On Alcatel 1342 QoSAC graphical interface. For each NE to be collected, create a NE under the related

site, providing required information (friendly name, type , release…) or by selecting a NE from the proposed list.

− For each created NE, check in the following step: 1) Launch NE data view.

For this test, you will refer to the following User Documentation: " Alcatel 1342 QoSAC Operator Guide " <See Ref [5]>

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 18/29

9 SHEET 7 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO OBSERVATION MONITORING

9.1 Purpose Check access to the observation monitoring from the Alcatel 1342 QoSAC operators. It includes retrieval of observations from OMCs and reports display.

9.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

9.3 Test resources − OWPs. − Alcatel 1342 QoSAC User Documentation.

9.4 Description of the operation − Open Alcatel 1342 QoSAC homepage. − From the homepage, launch following Management application:

• Alcatel 1342 QoSAC Graphical interface. See Alcatel 1342 QoSAC User Documentation − For a given NE check in the following steps:

1) Launch NE data view 2) Select an observation period Note After a creation of a NE, you have to wait a period (more than 15 min) in order to retrieve

observation files from OMC. If there is no available date, check that the Alcatel 1342 QoSAC server is correctly connected to the OMCs (IP address, ftp user, password).

3) Select a report 4) Select report mode (display, word, chart, html) 5) Select a sampling method 6) Draw the report. 7) Create a scheduled report 8) Check in the following steps

a) List scheduled report b) Modify scheduled report c) Generation of scheduled report d) Delete scheduled report

For this test, you will refer to the following User Documentation: " Alcatel 1342 QoSAC Operator Guide " <See Ref [5]>

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 19/29

10 SHEET 8 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO COUNTERS SELECTION AND USER DEFINED FORMULAS/REPORTS

10.1 Purpose Check access to the counter selection and user defined formulas/reports from the Alcatel 1342 QoSAC operators. It includes retrieval of observations from OMCs and reports display.

10.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

10.3 Test resources − OWPs. − Alcatel 1342 QoSAC User Documentation.

10.4 Description of the operation − Open Alcatel 1342 QoSAC homepage. − From the homepage, launch following Management application:

• Alcatel 1342 QoSAC Graphical interface. See Alcatel 1342 QoSAC User Documentation − Select new counters to be collected − Create QoS then reports including the new and/or predefined QoS/reports − For a given NE check in the following steps:

1) Launch NE data view 2) Select an observation period Note After a creation of a NE, you have to wait a period (more than 15 min) in order to retrieve

observation files from OMC. If there is no available date, check that the Alcatel 1342 QoSAC server is correctly connected to the OMCs (IP address, ftp user, password).

3) Select Report 4) Select report mode (display, word, chart, html) 5) Select a sampling method 6) Draw the report.

For this test, you will refer to the following User Documentation: " Alcatel 1342 QoSAC Operator Guide " <See Ref [5]>

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 20/29

11 SHEET 9 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO SUPERVISION SERVICES

11.1 Purpose Check access to the supervision services from the Alcatel 1342 QoSAC operators. It includes creation/deletion/modification of templates/supervisions.

11.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

11.3 Test resources − OWPs − Alcatel 1342 QoSAC User Documentation.

11.4 Description of the operation − Open Alcatel 1342 QoSAC homepage − From the homepage, launch following Management application:

• Alcatel 1342 QoSAC Graphical interface. See Alcatel 1342 QoSAC User Documentation − Create Templates then Supervisions − Check in the following steps

1) List template/supervision and check attributes (thresholds, schedule, …) 2) Modify template/supervision 3) Alarm generation (begin/end of alarm) 4) Email generation (begin/end of email) 5) Sms generation (begin/end of sms) 6) Delete template/supervision

For this test, you will refer to the following User Documentation:

" Alcatel 1342 QoSAC Operator Guide " <See Ref [5]>

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 21/29

12 SHEET 10 – CHECKING ALCATEL 1342 QOSAC OPERATION – SUPERVISION BY SENDING ALARM/EMAIL / SMS

12.1 Purpose Check access to the supervision services from the Alcatel 1342 QoSAC operators. It includes creation/deletion/modification of templates/supervisions. Check users can select additional actions “send an e-mail” and “send an sms”

12.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

12.3 Test resources − OWPs − Alcatel 1342 QoSAC User Documentation.

12.4 Description of the operation − Open Alcatel 1342 QoSAC homepage − From the homepage, launch following Management application:

• Alcatel 1342 QoSAC Graphical interface. See Alcatel 1342 QoSAC User Documentation − Create Templates then Supervisions − Check in the following steps

1) Create a supervision and check attributes (email address, email text, telephone number, sms text) 2) Check send an alarm/e-mail/sms once when the condition is triggered 3) Check send a clearance alarm/e-mail/sms when the condition disappears

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 22/29

13 SHEET 11 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – BACKUP

13.1 Purpose Check the data backup of the Alcatel 1342 QoSAC server.

13.2 Objects concerned The Alcatel 1342 QoSAC root operator on QoSAC server Alcatel 1342 QoSAC Server.

13.3 Test resources − OWP. − Alcatel 1342 QoSAC User Documentation. − A backup tape.

13.4 Description of the operation − Carry out a Backup to tape, see Alcatel 1342 QoSAC User Documentation:

"Alcatel 1342 QoSAC Administration Guide" <See Ref [4]> Chapter: "Data management procedures"

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 23/29

14 SHEET 12 – CHECKING ALCATEL 1342 QOSAC ADMINISTRATION – RESTORE

14.1 Purpose Restore data of the Alcatel 1342 QoSAC server.

14.2 Objects concerned − An Alcatel 1342 QoSAC administrator operator. − Alcatel 1342 QoSAC Server.

14.3 Test resources − An OWP. − Alcatel 1342 QoSAC User Documentation. − The backup tape.

14.4 Description of the operation − Delete some Sites/ Nes/template/Supervision and newly created operators. − Carry out the restoration, see Alcatel 1342 QoSAC User Documentation:

"Alcatel 1342 QoSAC Administration Guide" < See Ref [4]> Chapter: " Data management procedures "

Once the operation is achieved, check that operators, sites, NEs, templates and supervisions are recovered.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 24/29

15 SHEET 13 – CHECKING ALCATEL 1342 QOSAC FULL – BACKUP

15.1 Purpose Check the full backup of the Alcatel 1342 QoSAC server.

15.2 Objects concerned The Alcatel 1342 QoSAC root operator on QoSAC server Alcatel 1342 QoSAC Server.

15.3 Test resources − OWP. − Alcatel 1342 QoSAC User Documentation. − A backup tape.

15.4 Description of the operation − Carry out a Backup to tape, see Alcatel 1342 QoSAC User Documentation:

" QoSAC Full Backup/Restore Guide " <See Ref [6]> Chapter: " QoSAC Full Backup Procedure” Note The full backup save also data stored in database

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 25/29

16 SHEET 14 – CHECKING ALCATEL 1342 QOSAC FULL – RESTORE

16.1 Purpose Full restore of the Alcatel 1342 QoSAC server.

16.2 Objects concerned − An Alcatel 1342 QoSAC administrator operator. − Alcatel 1342 QoSAC Server.

16.3 Test resources − An OWP. − Alcatel 1342 QoSAC User Documentation. − The backup tape.

16.4 Description of the operation − Carry out the restoration, see Alcatel 1342 QoSAC User Documentation:

" QoSAC Full Backup/Restore Guide " < See Ref [6][6]> Chapter: " QOSAC FULL RESTORE”

Note it is not essential to perform a data restore because it’s included in full restore

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 26/29

17 SHEET 15 – CHECKING ALCATEL 1342 QOSAC OPERATION – QOS MANAGEMENT

17.1 Purpose Check access to the QoS management services from the Alcatel 1342 QoSAC operators. It includes creation/deletion/modification of QoS management.

17.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

17.3 Test resources − OWPs − Alcatel 1342 QoSAC User Documentation.

17.4 Description of the operation − Open Alcatel 1342 QoSAC homepage − From the homepage, launch following Management application:

• Alcatel 1342 QoSAC Graphical interface. See Alcatel 1342 QoSAC User Documentation

− Create QoS − Check that QoS is correctly added. − Modify or delete QoS . − Check that QoS is correctly updated or deleted .

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 27/29

18 SHEET 16 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO PLATFORM MANAGEMENT

18.1 Purpose Check access to the platform management from the Alcatel 1342 QoSAC operators. It includes access to information and monitoring of different objects on the tree node, the action stop/start of the process.

18.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

18.3 Test resources − OWPs. − Alcatel 1342 QoSAC User Documentation.

18.4 Description of the operation − Open QoSAC homepage, click on “Platform Management” link − Select one third parties and check that related informations are displayed in the right part of the window − Select one process and check that related informations are displayed in the right part of the window − Select one logical volume and check that related informations are displayed in the right part of the

Window. − Select one disk drives and check that related informations are displayed in the right part of the

Window. − Select memory and check that related informations are displayed in the right part of the window − Select CPU and check that related informations are displayed in the right part of the window − Check that the web page are refreshed. − Check that the Color of the related a physical disk , logical volume or CPU has changed on the GUI − Check that process can be correctly stopped and started.

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 28/29

19 SHEET 17 – CHECKING ALCATEL 1342 QOSAC OPERATION – ACCESS TO LOG MANAGEMENT

19.1 Purpose Check access to the log management from the Alcatel 1342 QoSAC operators. QoSAC GUI events should have been correctly logged the Log table.

19.2 Objects concerned − OWPs − Alcatel 1342 QoSAC Operator

19.3 Test resources − OWPs. − Alcatel 1342 QoSAC User Documentation.

19.4 Description of the operation � Start QOSAC GUI and check that the following events have been correctly logged in the Log table.

− Operator login/logout (including failure) − User creation/deletion − Site creation/update/deletion − NE creation/update/deletion − Supervision template creation/update/deletion − Supervision creation/update/deletion − Counter list modification − Formula creation/update/deletion − Report creation/update/deletion − Process start / restart / stop QoSAC internal events should have been correctly logged in the Log table.

− activates an action send alarm for supervision, logical volume, disks, memory and CPU. − For each action check that raise alarm are logged in the Log table. − activates an action clear alarm for supervision, logical volume, disks, memory and CPU. − For each action check that clear alarm are logged in the Log table

� Click on “Log Management” link in QoSAC homepage − Check that the log file displayed in the right part of the qosac pageweb − Check that the format of the file name is :QOSAC_date of today.log − Click on “QOSAC_date of today.log” and check that the log records displayed

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 29/29

20 END OF COMMISSIONING When acceptance tests are completed, you must leave the Alcatel 1342 QoSAC as ready for Network Acceptance, without any undue NE or Operator or other data you may have introduced during the tests. For this, you have to remove Site, Nes, templates, supervisions and/or Operators that you have declared. The Alcatel commissioning tester must warn the customer (and Alcatel support staff) about the need to organize the data back-up policy. This policy should be enforced after full network acceptance is performed and required NEs are created. Refer to User Documentation: − "Alcatel 1342 QoSAC Administration Guide" <See Ref [4]>

Chapter: "Backup/Restore"

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 30/29

21 CERTIFICATE OF COMMISSIONING This page is to be returned once signed with the tests results attached (previous pages) to the Mobile Internet Program Management of the Mobile Core Business Unit.

21.1 Signatures CUSTOMER NAME : ………………………… PROJECT MANAGER : ………………………… Date : …………………

ALCATEL-LUCENT PROJECT MANAGER : …………………………… Date : ……………………

21.2 Release Core Network : Alcatel Core Network Release ……. Alcatel 1342 QoSAC identification: Alcatel 1342 QoSAC Rx.x.x.x. ..-..

21.3 Tests results Fill the cases with a cross according to the results.

Tests results SHEET Applicability RESULT COMMENTS

YES NO OK NOK YES NO SHEET 1 : Hardware completeness SHEET 2: Software completeness SHEET 3: Alcatel 1342 QoSAC CN start/stop SHEET 4 : LAN / Wan aspects SHEET 5: Add / Remove operators SHEET 6: Access to Administration Services SHEET7: Access to observation monitoring SHEET 8: Access to counters selection

and user defined formulas/reports

SHEET 9: Access to Supervision Services SHEET 10: Supervision by sending email / SMS SHEET 11: Data Backup SHEET 12: Data Restore SHEET 13: Full Backup SHEET 14: Full Restore SHEET 15: QoS Management SHEET 16: Platform Management SHEET 17: Log Management

All rig

hts re

served

. Pass

ing on

and c

opyin

g of th

is do

cumen

t, use

and c

ommu

nicati

on of

its co

ntents

no

t perm

itted w

ithou

t writt

en au

thoriz

ation

from

Alcate

l.

3BL 76305 BCAA QSZZA Edition 03 RELEASED 31/29

21.4 Comments