1-103 Slide Shoe for Cams - METALIKA KACIN · • O-Ring: NBR Elegant Compression Latch with variable H-dimension. • Low profi le design. • Clamping grip 6mm/0.236. • Vibration-proof

01.12.09© copyright by DIRAK / Germany

DIRAK GmbH Königsfelder Str. 1 58256 EnnepetalTel. / Phone: +49 (0) 2333/837-0 Fax: +49 (0) 2333/837-100 www.dirak.de / www.dirak.com

1-103 Slide Shoe for Cams

Part-No.Slide Shoe 200-9622

Slide shoe for cams, 2 parts, consisting of housing and latch.

Matching cams as of 35 mm, steel • product system 1.102 and stainless steel product system 7-080, in combination with a 3-point-cam adapter it matches 3-point-cam applications as well.No abrasion of the metal of the • clamping surface resp. cam and therefore safety concerning electronic built-in components (risk of short circuits in computer, server etc.).Good gliding properties, therefore low • friction coeffi cient, no fretting of the material.Prevents the surface from being • scratched.

Tool-less assembly and disassembly. • The housing will be hold at the slope of the cam and being fi xed to the latch.The assembly will be carried out with • the already installed quarter turn, it is possible to retrofi t at any time (please take the H-height into consideration).Separable after durability (recyclable).• Caution:• The H-height diminishes by 2 mm. E.g. cam 200-0418 (H-height 18 mm) results into an H-dimension of 16 mm.

Material:POM, natural•

© copyright by DIRAK / Germany27.06.11

1-041.02SL Captive D-SNAP-Joiner 12.7for cutout 12.7, complies with the machinery directive 2006/42EG, tool-less installation

clamping range Part No.Captive D-SNAP-Joiner 1.4 - 1.9 294-9103.00-00021

2.4 - 2.9 294-9103.00-000312.9 - 3.4 294-9103.00-000363.4 - 3.9 294-9103.00-000413.9 - 4.4 294-9103.00-000464.9 - 5.4 294-9103.00-000565.9 - 6.4 294-9103.00-00066

Other - dimension on request!

Captive D-SNAP-Joiner for joining flat metal sheets.• The joining of metal sheets is

achieved by pushing the Captive D-SNAP-Joiner into the cutouts.

• The front panel can be separated from the rear panel by using a Phillips H2 screwdriver. Turn the Phillips head insert to pull the front panel away.

• Designed for ease of use by the enduser - disengaging is achieved by turning the knob ¼.

• Save up to 90% assembly time.• The dimension always means the

thickness of both sheets together.• Completely pre-assembled, one-piece.

• Machinery Directive 2006/42EC: In order to meet the Machinery Directive 2006/42EC an additional U-shaped spring is riveted onto the housing. The Captive D-SNAP-Joiner is held in position and remains held by the U-shaped spring.

• The Captive Joiner eliminates the concern of losing, dropping or misplacing hardware.

Material:• Housing: zinc die, untreated• SNAP wedges: sintered steel• Insert: steel, chrome plated• U-shaped spring: spring steel, zinc

plated• Leaf spring: stainless steel

UL

Elegantly designed, sealed polyamide quarter-turn with moulded-in TPE seal that is permanently fixed in the PA housing, thus ensuring that it cannot be lost.• The seal is located under the head

and inside the housing.• Colored seal.• Water- and dust-tight according to

IP65/67 DIN EN 60529.• The Quarter-Turn consists of three

basic components which can be combined to suit your application.

• Insert and cam can be clipped together without tools before the installation in the housing.

• A pre-assembled Quarter-Turn can be installed through the cutout.

• RH and LH application.• Maximum load for the cam 250N.• Load may be increased to 600N with

use of a fi xing plug.• Attention: Please consider the

packing units!

Material:• Housing, insert, cam and nut: PA6,

black• Seal: TPE, red• Fixing plug: PA6, red

Part No. packing unit / piece see product systema) Housing 2K 200-0211.00-00000 1000a1) Nut 203-0901.07-00000 1000

Inserts:b) Double bit 3mm pin 100-0388.50-00005 250b1) Double bit 5mm pin 100-0388.50-00001 250b2) Square 8mm 100-0388.50-00002 250b3) Triangular 8mm 100-0388.50-00003 250b4) Slotted 2x4mm deep 100-0388.50-00004 250

Cams:c) H=18 (0.709) 200-0769.50-00018 250c1) H=20 (0.787) 200-0769.50-00020 250c2) H=22 (0.866) 200-0769.50-00022 250c3) H=24 (0.945) 200-0769.50-00024 250c4) H=28 (1.102) 200-0769.50-00028 250

Optional:Finger pull and Dustcap 1-270Anti-rotation device 1-275Assembly on request

d) Fixing Plug on request 250

1-092 Quarter-Turn 2K Pr20.1 L182 component PA6 / TPE, protective insulated PA

4NmIP65/67

15Nm IP 67

7-079 Compression Latch Pr20.1H-dimension adjustable, stainless steel AISI 316

• The cam can be varied to ±6mm/0.236 via nuts (included) on the axis.

Material:• Housing, Insert, Axle, Nut, Cam and

Serrated Screw: stainless steel• O-Ring: NBR

Elegant Compression Latch with variable H-dimension.• Low profi le design.• Clamping grip 6mm/0.236.• Vibration-proof according to

DIN EN 61373.• Dots are marked in color on the

housing top open/closed in the shape of the padlock.

• Installation depth in uncompressed condition, 69mm/2.717.

• Water- and dust-tight according to IP67 DIN EN 60529.

• RH and LH version.• The H-dimension can be varied via the

cranking of the cams.

a) Compression Latch with Insert: Part-No.RH (as drawn)

Part-No.LH

see product system

248-92AA 248-92AASquare 6 248-9200 248-9250Square 7 248-9201 248-9251Square 8 248-9202 248-9252Double bit 3 248-9203 248-9253Double bit 5 248-9204 248-9254Triangular 6,5 248-9205 248-9255Triangular 7 248-9206 248-9256Tiangular 8 248-9207 248-9257Conical Square 248-9208 248-9258

Serrated lock washer, anti-rotation device and dustcap to be ordered separately 1-275Key for Insert 6-100

7-079 Compression Latch Pr20.1H-dimension adjustable, stainless steel AISI 316

b) Cams H in mm / inch KK Component Part-No. L35

Component Part-No. L45

negative 17 - 29 / 0.669 - 1.142 22 100-0535.80-00022 100-0545.80-0002219 - 31 / 0.748 - 1.220 20 100-0535.80-00020 100-0545.80-0002021 - 33 / 0.827 - 1.299 18 100-0535.80-00018 100-0545.80-0001823 - 35 / 0.906 - 1.378 16 100-0535.80-00016 100-0545.80-0001625 - 37 / 0.984 - 1.457 14 100-0535.80-00014 100-0545.80-0001427 - 39 / 1.063 - 1.535 12 100-0535.80-00012 100-0545.80-0001229 - 41 / 1.142 - 1.614 10 100-0535.80-00010 100-0545.80-0001031 - 43 / 1.220 - 1.693 08 100-0535.80-00008 100-0545.80-0000833 - 45 / 1.299 - 1.772 06 100-0535.80-00006 100-0545.80-0000635 - 47 / 1.378 - 1.850 04 100-0535.80-00004 100-0545.80-0000437 - 49 / 1.457 - 1.929 02 100-0535.80-00002 100-0545.80-00002

straight 39 - 51 / 1.535 - 2.008 00 100-0535.80-00000 100-0545.80-00000positive 41 - 53 / 1.614 - 2.087 02 100-0535.80-00002 100-0545.80-00002

43 - 55 / 1.693 - 2.165 04 100-0535.80-00004 100-0545.80-0000445 - 57 / 1.772 - 2.244 06 100-0535.80-00006 100-0545.80-0000647 - 59 / 1.850 - 2.323 08 100-0535.80-00008 100-0545.80-0000849 - 61 / 1.929 - 2.402 10 100-0535.80-00010 100-0545.80-0001051 - 63 / 2.008 - 2.480 12 100-0535.80-00012 100-0545.80-0001253 - 65 / 2.087 - 2.559 14 100-0535.80-00014 100-0545.80-0001455 - 67 / 2.165 - 2.638 16 100-0535.80-00016 100-0545.80-0001657 - 69 / 2.244 - 2.717 18 100-0535.80-00018 100-0545.80-0001859 - 71 / 2.323 - 2.795 20 100-0535.80-00020 100-0545.80-0002061 - 73 / 2.402 - 2.874 22 100-0535.80-00022 100-0545.80-00022

© copyright by DIRAK / Germany06.06.11DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal

Tel. / Phone: +49 (0) 2333/837-0 Fax: +49 (0) 2333/837-100 www.dirak.de / www.dirak.com

4-400 Scharnier PA Pr01 180° 60x40für innenliegende Tür, anschraubbar

Bestell-Nr.Scharnier PA 218-9220

Werkstoff:• Scharnier: PA6, schwarz

Formschönes Anschraubscharnier für Senkschrauben, DIN 7991 oder nach DIN ISO 10642 und nach DIN 965 oder DIN ISO 7046.• Links und rechts einsetzbar.• Öffnungswinkel 180°.• Unverlierbarer Stift.• Stift gegen herausschlagen gesichert.• Spielfreie Ausführung.• 6 teiliges Gewerbe.• Geringes Gewicht.• Korrosionsbeständig.• Abgerundete Kanten.