Transcript
1
Welcome!
To our new paper catalogue for year 2010! You can find here offer of
functional replica weapons and armory. Our goal is to provide quality
equipment to wide range of people interested in historical fencing. We
produce replicas with more than 20 years of experience and with lots of
satisfied custommers throughout Europe.
All the weapons are handmade by our company. Their design, method of
construction, dimensions and weight are optimised on the basis of many years
of experience of their use in contact fencing. The risk of fracture or breaking
off of part of the blade causing danger and injury is hereby minimised.
All our blades are made from high-grade spring steel type 14260.7; any further
heat treatment causes changes in the weapon's utility characteristics. The
cross-piece and head are made from steel of standard quality. The head is
brazed to the blade (hard solder); the connection acts as a safety-catch against
abnormal exertion of the weapon. Any interference in or change to these
connections causes not only loss of guarantee but also reduces substantially
the weapon's useful life. If a cross-guard starts moving, we recommend
tightening the connection using nylon line, cord, leather or similar materials.
There also helps few well aimed hammer hits on the middle part of guard.
Stainless steel is not used anywhere in the weapon and thus it becomes
important to preserve and protect it against damp conditions. If you follow
these principles and recommendations you will minimise possible damage to
the weapon and your own safety. Fabri Armorum provides its customers two
years guarantee to any and all of its products and lifelong service.
Please use the weapons in a reasonable way, they are not to be used for cutting
wood, as a lever or a mattock; use the weapon properly and adjust the way you
use it to suit circumstances and your own strength. We do hope you will be
fully satisfied with our products and we wish you every success.
Jiri Krondak and his team
2
Striking weapons
tab.
1 Striking weapons price weight length
1 Mace € 83 0,8 kg 60 cm
2 Flail - 1 ball € 83 0,95 kg 60 cm
3 Flail - 2 ball € 90 0,95 kg 60 cm
4 Flail - 3 ball € 100 0,95 kg 60 cm
5 Flail - 3 rings € 90 0,95 kg 60 cm
6 Mauled flail € 92 0,95 kg 60 cm
7 War hammer € 118 1,2 kg 60 cm
8a Mace fullmetal € 140 1,1 kg 60 cm
8b Mace fullmetal - decorated € 168 1,1 kg 60 cm
9 Flail fulmetal - ball € 154 1,3 kg 60 cm
10 Flail fulmetall - mauled € 154 1,3 kg 60 cm
11a War hammer fullmetal € 130 1,1 kg 60 cm
11b Decorated fulmetall warhammer € 144 1,1 kg 60 cm
12 Morningstar mace fullmetall € 168 1,6 kg 60 cm
3
Throwing weapons
tab.
2 Throwing weapons price weight length
1 Throwing axe € 43 0,6 kg 50 cm
2 Throwing Francisca € 77 0,6 kg 45 cm
3 Throwing dagger € 54 0,2 kg 30 cm
Two-handed axes
tab.
4 Two-handed axes price weight length
1 Danish axe € 104 2,3 kg 100 cm
2 Axe "Le-Duc" € 104 1,6 kg 100 cm
3 Axe "Maciejowski" € 104 1,6 kg 100 cm
4 Double axe € 115 2,4 kg 90 cm
4
Single-handed axes
tab.
3 Single-handed axes Price weight length
1 Great Moravian axe € 83 1,2 kg 80 cm
2 Viking axe € 72 1 kg 70 cm
3 Francisca € 77 1,1 kg 70 cm
4 Gothic axe € 83 1,6 kg 80 cm
5 Bearded axe € 83 1,6 kg 80 cm
6 Fighting axe - spike € 118 1,3 kg 70 cm
7 Fighting axe - hammer € 118 1,3 kg 70 cm
8 Fighting axe - fullmetal € 149 1 kg 60 cm
5
Fighting daggers
tab.
5 Fighting daggers Price weight length
1 Gothic dagger medium € 72 0,6 kg 40 cm
2 Gothic dagger long € 82 0,7 kg 55 cm
3 Disc dagger medium € 72 0,5 kg 40 cm
4 Disc dagger long € 82 0,6 kg 55 cm
5 Parrying dagger € 100 0,6 kg 55 cm
6 Parrying dagger - Spanish € 109 1,1 kg 55 cm
7 Parrying dagger "Pappenheim" € 109 1 kg 55 cm
Theese daggers are designed to use in live combat, so blades are blunted
and have enough radius on the point. We use the same construction like
our swords for maximal sturdyness.
6
Costume daggers
1 2 3 4 5
6 7 8 9 9
10 11 12 13
tab.
6 Costume daggers price
1 Phallic dagger 1 € 85
2 Phallic dagger 2 € 103
3 Phallic dagger 3 € 103
4 Disc dagger 1 € 72
5 Disc dagger 2 € 72
6 Disc dagger 3 € 85
7 Rennaisance dagger 1 € 103
8 Rennaisance dagger 2 € 103
9 Gothic dagger € 72
10 Italian basilard 1 € 125
11 Italian basilard 2 € 125
12 Swiss basilard 1 € 125
13 Swiss basilard 2 € 125
7
Medieval single-handed swords
tab.
7 Single-handed swords Price weight length
1 Dark middle-age sword € 166 1,4 kg* 90 cm
2 Viking sword € 185 1,4 kg* 90 cm
3 Gothic single-handed sword € 158 1,2 - 1,4 kg* 90 cm
4 Broad single-handed sword € 181 1,4 - 1,5 kg* 90 cm
5 Italian single-handed sword € 192 1,4 - 1,5 kg* 90 cm
6 Cavalry single-handed sword € 168 1,4 - 1,5 kg* 100 cm
7 Archer small sword € 137 1,2 kg* 75 cm
*Weight and ballance depends on type of blade. Here we present our
typical weight of sword with the "heavy fighting" blade (3mm edge).
It is possible to make cca 100-200g lighter sword, but less material can
make the blade vulnerable to deformations, when used in "adrenaline"
style of fencing.
8
Medieval One-and-half swords
tab.
8 One-and-half swords Price weight length
1 Light 1,5-handed sword € 168 1,5 - 1,7 kg* 105 cm
2 Long light 1,5-handed sword € 185 1,7 - 1,9 kg* 120 cm
3 Pricking 1,5-handed sword € 197 1,9 - 2,1 kg* 125 cm
4 Heavy 1,5-handed sword € 200 2,1 - 2,3 kg* 125 cm
*Weight and ballance depends on type of blade. Here we present our
typical weight of sword with the "heavy fighting" blade (3mm edge).
It is possible to make cca 200-300g lighter sword, but less material can
make the blade vulnerable to deformations, when used in "adrenaline"
style of fencing.
9
Two-handed swords
tab.
9 Two-handed swords Price weight length
1 Gothic two-handed sword € 256 3,1 kg 155 cm
2 Claymore € 256 2,8 kg 130 cm
3 Rennaisance two-handed sword € 306 4,3 - 5 kg 170 cm
10
Rennaisance and baroque swords
tab.
10 Rennaisance and baroque swords price weight length
1 Katzbalger € 187 1,6 kg 75 cm
2a Rennaisance sword - pricking € 238 1,4 - 1,5 kg 110 cm
2b Rennaisance sword - pricking (Italian) € 238 1,4 - 1,5 kg 110 cm
3a Rennaisance sword - cutting € 238 1,4 - 1,5 kg 95 cm
3b Rennaisance sword - cutting (Italian) € 238 1,4 - 1,5 kg 95 cm
4 Scottish basket-hilt sword € 281 1,6 kg 90 cm
5 Schiavonna € 281 1,6 kg 90 cm
6 Baroque sword € 250 1,4 kg 90 cm
7 Baroque sword - short € 238 1,3 kg 75 cm
11
Rapiers
tab.
11 Rapiers Price weight length
1 Rapier - bell shaped hilt € 194 1,4 kg 110 cm
2 Rapier - saucer shaped hilt € 218 1,2 kg 110 cm
3 Rapier - skeleton shaped hilt € 225 1,3 kg 110 cm
4 Rapier - "Pappenheimer" € 225 1,4 kg 110 cm
Saxes
tab.
13 Saxes Price weight length
1 Sax - short € 88 0,4 kg 40 cm
2 Sax - medium € 100 0,6 kg 50 cm
3 Sax - long € 114 0,8 kg 60 cm
4 Scramasax € 137 1 kg 70 cm
12
Cutlass & Falchions
tab.
12 Cutlass Price weight length
1 Gothic cutlass € 156 1,2 - 1,3 kg 75 cm
2 Italian cutlass € 163 1,3 kg 75 cm
3 Falchion € 156 1,2 - 1,3 kg 75 cm
4 Langmesser € 163 1,3 kg 75 cm
5 Falchion "Maciejowski" € 177 1,2 - 1,3 kg 80, 85 cm
6 Bohemic cutlass - short € 81 0,7 kg 60 cm
7 Bohemic cutlass - long € 90 0,8 kg 70 cm
8 Scimitar cutlass € 163 1,3 - 1,4 kg 85 cm
9 Baroque cutlass € 232 1,3 kg 75 cm
10 Scimitar cutlass - special € 178 1,2 kg 85 cm
11 Rennaisance cutlass "Malchus" € 177 1,3 - 1,4 kg 75 cm
12 Rennaisance cutlass 1,5-handed € 200 1,5 - 1,6 95 cm
13 Rennaisance cutlass two-handed € 256 2,3 kg 125 cm
13
Sabres
tab.
14 Sabres price weight length
1 Arabic sabre € 206 1,2 kg 90 cm
2 Hungarian sabre € 206 1,2 kg 90 cm
3 Persian sabre (shamshir) € 187 1 kg 90 cm
4 Polish sabre € 218 1 kg 90 cm
5 Avarian sabre € 187 1,2 kg 90 cm
6 Swiss sabre € 238 1,3 kg 90 cm
7 Rennaisance two-handed sabre € 282 2 kg 120 cm
8 Rennaisance sabre € 206 1,3 kg 90 cm
9 Karabela € 206 1,3 kg 90 cm
14
Leather scabbards
Sword crossguards
Basic straight guards
Basic bowed guards
scabbards price
Scabbard for 1-h. sword + belt € 70
Scabbard for 1.5-h. sword + belt € 75
Scabbard for long 1.5-h sword + belt € 80
Scabbard for falchion + belt € 70
Scabbard for sabre + belt € 75
Sword hanger € 12
15
Sword pommels
Specific pommels of dark middle-age swords
Specific pommels of medieval one-handed swords
Specific pommels of medieval one-and-half-handed swords
Specific pommels of rennaisance swords
16
Pricelist of training variants "poor solider"
Training version of sword means a purpose-built replica of sword for using it
in swordfight training, or in battle. We could also call it "economic", because
in fact, it is not a typical sword from our production. It is made to have all
fighting qualities for the best price possible. The price of a "Training" sword is
lower, because ve produce high number of them at once, and we also spare
some work on polishing and decorating. Theese weapons are very simple and
we do not make any customization here.
Economic variant price
Dark middle-age sword € 138
Viking sword € 154
Gothic one-handed sword € 133
Broad sword € 151
Cavalry sword € 140
Archer sword € 115
1,5h. light sword € 140
1,5h. bastard sword € 154
1,5h. pricking sword € 164
1,5h. heavy sword € 167
Cutlass gothic € 131
Cuttlass italian € 136
Falchion € 131
Scimitar cutlass € 136
Gothic dagger short € 54
Gothic dagger medium € 59
Gothic daggr long € 67
Disc dagger € 59
Disc dagger long € 67
Parrying dagger € 83
Sax - short € 72
Sax - medium € 83
Sax - long € 94
Scramasax € 115
17
Steel shields
tab.
21 Steel shields
price -
classic
price -
decorated weight size
1 Almond-shaped shield € 138 € 166 5,5 kg 60 x 110 cm
2 Round shield - small € 97 € 116 3 kg d = 50 cm
3 Round shield - big € 109 € 132 4 kg d = 60 cm
4 Gothic shield - small € 77 € 94 2,2 kg 40 x 40 cm
5 Gothic shield - big € 97 € 116 3,5 kg 50 x 50 cm
6 Buckler - small € 76 € 90 1,5 kg d = 23 cm
7 Buckler - big € 80 € 96 2 kg d = 35 cm
8 Buckler "Le-duc" € 100 € 125 2,5 kg d = 35 cm
9 Small pavise € 100 € 125 2 kg 30 x 30 cm
10 Buckler "Tallhofer" € 90 € 113 2 kg 30 x 40 cm
-All shields are made from high quality hardened steel.
- Decorated variant is extra reinforced for ultra heavy hits, but more material
makes it heavier than classic.
-All shields can be easily painted using synthetic paint on iron, or even car
spray. But it is needed to remove the grease first!
18
Gauntlets
# Gauntlets price
1 Gloves with chain fingers (complement to nr. 3) € 86 /pair
2 Chain gloves € 163 /pair
3 Fist-gaunlets € 137 /pair
4 Mitten gauntlets - short € 185 /pair
5 Mitten gauntlets - long € 200 /pair
6 Finger gauntlets short € 185 /pair
7 Finger gauntlets long - light € 200 /pair
8 Finger gauntlets long - heavy € 200 /pair
9 Wisby gauntlets € 200 /pair
We can not warrant full protection of hand against strong hits. For
maximal protection we recommend models 4 and 5. For the best agility
of wrist and fingers in technic fencing we recommend nr. 7.
Model nr. 2 is possible to make in three different ways:
a) all fingers together (mitten gloves)
b) index finger is separate from others
c) all fingers are separate (normal gloves)
19
Armory
In principle, concerning our armour or its parts we
can say the same as about our weapons: We pay
main attention to its contemporary practicle use. Its
construction and robustness is defined by the
demand of mobility and all-round view more than
by the demand of protection from a real deadly
attack from a firearm or edged weapon.
Example of simple gothic
infantry armor (matt surface)
price
Kettle hat € 167
Simple gorget € 91
Shoulders € 185
Front plate € 110
Back plate € 110
Open elbows € 257
Swiss knees € 259
Helmets
Basic types of helmets Basic price
Open helmets (f.e. viking, norman, barbut, hat ...) € 150 - € 200
Visier helmets (f.e. sallet, pigface, great helm, ...) € 200 - € 250
Special helmets (f.e. morion, burgunet, fantasy
helmets, roman legion, ...)
€ 250 - more
20
Full set of armory is very custom production which needs individual
agreement and also very good personal measurement. Here we present
basic measures neccessary for ful set of armory. For custom helmets is
also important to know your face profile and head shape.
top related